Align image left with css
Hi, I have a simple question. I am using the following line
in my css file to apply a background image to a canvas:
Canvas {
background-image:
Embed("/images/Icons_Final/connected.png");
What would I do to align that image to the left of the
canvas. I can't seem to find any documentation on these specific
types of properties within CSS. Also, if anyone could point me
toward a nice concise list of all the properties available in
FLEX's CSS, I would greatly appreciate it. Thanks!
CSS is not a substitute for HTML, it is a styling
companion… it stands for Cascading STYLE Sheets… It is
a method to apply uniform styles to a page or all of your pages on
your site. You still need to use the full functionality of HTML or
graduate to PHP, SQL, or other methods of adding functionality to
your site.
As for animated image links… use animated .gif files
and just apply a link to it. You will get all kinds of advice and
opinions on whether animated .GIFs are appropriate, classy, ugly or
tacky… but if animated links are what you want, they work.
If you want animation in the sense of Flash buttons, buttons
that blink, change colors, images, etc. when moused over or
clicked, you can use CSS for this effect.
Make 2 to 4 images with your graphics editor, sized to fit as
background images behind text. Try 100x15 pixels to start. Then put
this code in your CSS file for links:
.left a:link {
color: #FFF;
.left a:visited {
color:#CCC;
.left a:hover {
color: #FF6699;
background-image: url(images/left-hover.jpg);
.left a:active {
color: #F00;
background-image: url(images/left-hover.jpg);
I used this to define a left side and right side set of
links, but you could apply this to all your links or just a named
set.
This will produce links that can very closely approximate
flash buttons but still maintain a text based link that can be read
by the search engine browsers.
Hope this is helpful…
Similar Messages
-
i have problem with hotspot because its position cant be fixed to follow the proportion of the fixed background in different resoulutions.
You can't affect hotspots at all with css. Here are a couple different options you have available though...
You could try using multiple images that scale, linking each individual image, instead of hotspots.
You could also look into "responsive image maps" to get quite a few examples of jquery/javascript run image maps that can be scaled.
Depending on your image, (for example, if you are linking states on a map) you would be able to use SVG paths and link the paths with javascript. -
I have a image gallery (slideshow) created with Flash and
XML. My website uses a css/javasript dropdown menu for navigation.
The dropdown menu is hiding behind the slideshow no matter what I
set it's z-index to. Is there something in flash that lets me set
its z-index? I could jsut drop the menu off of the page and give a
return link but that is a workaround and I would much rather stay
consistent with my site. Any help that could be given would be
appreciated.
Mark V."mvanneman" <[email protected]> a écrit
dans le message de news:
f9ssu4$346$[email protected]..
>I have a image gallery (slideshow) created with Flash and
XML. My website
>uses
> a css/javasript dropdown menu for navigation. The
dropdown menu is hiding
> behind the slideshow no matter what I set it's z-index
to. Is there
> something
> in flash that lets me set its z-index? I could jsut drop
the menu off of
> the
> page and give a return link but that is a workaround and
I would much
> rather
> stay consistent with my site. Any help that could be
given would be
> appreciated.
try to embed your movie with wmode="transparent"
lea -
Spry dataset problem. Image dimensions with css
Hey guys.
I'm new to spry, and not an experienced web designer with beginner knowledge in programming.
I am using a spry data set to make a blog kind of interface. I'm using a master/detail layout from the Dreamweaver presets. I am using html, not xhtml and dreamweaver cs4.
I want to change the dimensions of the images in the detail container. I would like to use the max-width command. I have tried using an id tag on the image detail column and using the width command on it with little luck.
How can I do this. Using css is a must, because I'll be using InContext Editing so other users can upload images and posts. So they won't have to worry about the dimensions.
Thanks alot.
HelgiI forgot to mention one other problem
The layout that I sketched up is the one I am going for. So a tip on how to get the text and the headings to flow around the image like shown in the picture would be greatly appreciated. Is it recommended to use tables inside div tags or spry for that matter?
Thanks a million. -
How to set image border with CSS Designer?
I must be missing something obvious...
I need to set an image border. I select the image. But I don't see any relevant inline style option in CSS Designer.
It only lets me change <inline style> : td but there's no option for the image.
What am I missing?
Thanks,
LeoThanks John,
Yes, obviously I select the image.
However, it doesn't change anything.
I don't get the "img" selector whatever choice I select it the Sources pane.
What am I missing? -
This is probably something simple I'm missing. I want to
create a thin border using CSS that will go around images. But it
needs to be able to resize as needed to the particular image.
I can obviously create a border of a particular size, but is
there a way to create one that will resize around the image? "Auto"
for the size just gives me a box that stretches across the page.
-Jesseimg { border:1px solid black; }
This will create a thin, black border around all images
regardless of their
dimensions.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"JesseLY" <[email protected]> wrote in
message
news:fnl6sg$jki$[email protected]..
> This is probably something simple I'm missing. I want to
create a thin
> border
> using CSS that will go around images. But it needs to be
able to resize as
> needed to the particular image.
>
> I can obviously create a border of a particular size,
but is there a way
> to
> create one that will resize around the image? "Auto" for
the size just
> gives me
> a box that stretches across the page.
>
> -Jesse
>
> -
I'm trying to have an image where as you roll over it the
border colour changes. The problem is the code works in firefox and
opera but not in Internet Explorer. In Internet Explorer the hover
part doesn't work at all. Thanks in advance for any help.IE only does the :hover pseudo-class on links.
Try making the images into links and adding the link to the
selector -
> #rightlink a img{
> border: 1px solid red;
> }
> #rightlink a:hover img{
> border: 1px solid blue;
> }
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"spd998" <[email protected]> wrote in
message
news:fhuqo2$noj$[email protected]..
> I'm trying to have an image where as you roll over it
the border colour
> changes. The problem is the code works in firefox and
opera but not in
> Internet
> Explorer. In Internet Explorer the hover part doesn't
work at all. Thanks
> in
> advance for any help.
>
> #rightlink img{
> border: 1px solid red;
> }
> #rightlink:hover img{
> border: 1px solid blue;
> }
> -
Spry Photo Gallery Image Size via CSS
Hello!
I´ve been customizing the spry photo gallery for a couple of time, but got my little problem when viewing it on a mobile phone. When you load up the pictures with a size of 450 x 300 px for example, put up the right xml file with it´s width and height, so the gallery shows the pictures in that size. So what I want to do is that you can specify the image size with css depending on the device you´re watching the site with. There is div in the css called "mainImage" where the size is in %. When you change it to 75% for example. The pictures are correctly shown with 75% of it´s original size, but the outline (grey background) is still in 100%. When you make this grey background transparent it´s still there and moves the caption down. I guess there have to be done some changes within the SpryImageViewer.js, but I just know very little things about JavaScript. Do you have any clues how to change this to specify the image size via CSS?
Thank you for your help!!!
Kind regards,
JoergI see you are still using Spry 1.5. Have you considered upgrading to
Spry 1.6.1?
Also your XML is broken, if you open up your xml in a normal standards
complaint browser such as firefox, you will see that it doesn't render
a normal tree view as it would do with other xml files. So i suggest
checking those errors out.
Its mainly because you forgot to close your starting tag of the
gallerys node. (<gallery
base = ""
background = "#FFFFFF"
banner = "#F0F0F0"
text = "#000000"
link = "#0000FF"
alink = "#FF0000"
vlink = "#800080"
before your xml starts. -
How I can change the theme using with css
How I can change the flex theme and images using with css ?
Bonjour ixixix2006
Perhaps you will find your bonheur here:
http://nonlinear.openspark.com/tips/scripts/localisation/index.htm
Cheers,
James -
Cropping at same size and with aligned images (and/or at scale)
hi all. i am hoping for a little help as i tune up my photoshop usage.
i am finding that i sometimes have a need to crop a couple of images from something like an architectural line drawing. this means that i have lines in this drawing and i am oftentimes in need - for instance if i have copied two floor plan with one above the other - of having these images sit in a frame that is the SAME SIZE.
i am also in the need of cropping so that the resulting images are ALIGNED - with for instance one line in one image at the same spot at the bottom and to the left with the same amount of bleed area around the image both at this point and at all other points.
is there a way to crop an image in two different spots at the SAME SIZE?
is there a way to crop a "sloppy" copy of two sets of images so that the canvas is the same size but the resulting set of images are aligned in the manner described above?
ALSO, is there some way for me to SCALE a set of images in Photoshop?
thanks in advance for any links, advice, expertise etcetera.
- jonhi jjm.
i think i threw something in that should have been separated into antother posting. i am not so concerned about the scaling question.
i am more concerned about being able to get two separate sets of images - with for instance a line drawing - out of another drawing so that i have two images that when placed in a document will have the same size and the same amount of bleed area in white around it.
i guess in thinking about this - that i would just copy and paste each image to a new document, CROP as close to the image as possible and then ENLARGE THE CANVAS SIZE to whatever size i wanted. this would then meant that the image had almost the same placement in the canvas since i CROPPED the two images as close as possible and then enlarged to suit.
but this seems like it only would work for images with white backgrounds or single color backgrounds in a way somehow.
i mean, is there a way to place a COPY box on a very large image with a set of other images in it and Copy two sets of images to new documents so that they are the same size? or i mean a more accurate way to COPY information out of a document? what about making sure that an image is placed correctly in a CANVAS?
it seems like i would be asking for a tool that would let me select a point on the image and to tell photoshop to give me this image (or each image in this case) a CANVAS of some size or a CANVAS with some BORDER /around/ the rest of the image of some measurement.
is there anything like this? something more accurate for copying information so that i can repeat the copy and something more accurate for CUT or Canvas so that i can place an image in the final file more accurately?
i always sort of wing it with this and have to do Canvas sizes freehand or CUT the image close and then enlarge the canvas and this seems rather imprecise...
THANKS -
Is there a way to create a CSS image gallery with caption?
Hi everyone,
Ive been using the disjoint rollover, but I only have one
thing that I want to add to it—a caption right underneath an
image.
Besides using that Project Seven plug-in, is there a way to
create an image gallery without using layers? Or is layers the only
way to do it? All I want (words of doom, huh?) is a thumbnail to be
able to switch and image and add a caption to it. Can anyone point
me in the right direction? Or is that Project Seven plug-in deal my
best bet? What about Set Text of Layer in DW.
Oh yeah, Im still using DW with CSS sprinkled in..any help?
Thanks in advance.
-C> Besides using that Project Seven plug-in, is there a way
to create an
> image
> gallery without using layers?
Of course.
> What about Set Text of Layer in DW.
That would do it, and it's not necessary that the layer stay
a layer after
you have done it, either. I do this frequently - make a
layer, apply the
behavior, and then remove the position:absolute from the div,
and place it
where I want it.
See the demo here -
http://dreamweaverresources.com/tutorials/settextoflayer.htm
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"psypent81" <[email protected]> wrote in
message
news:eus555$lac$[email protected]..
> Hi everyone,
>
> Ive been using the disjoint rollover, but I only have
one thing that I
> want to
> add to it?a caption right underneath an image.
> Besides using that Project Seven plug-in, is there a way
to create an
> image
> gallery without using layers? Or is layers the only way
to do it? All I
> want
> (words of doom, huh?) is a thumbnail to be able to
switch and image and
> add a
> caption to it. Can anyone point me in the right
direction? Or is that
> Project
> Seven plug-in deal my best bet? What about Set Text of
Layer in DW.
>
> Oh yeah, Im still using DW with CSS sprinkled in..any
help?
>
> Thanks in advance.
>
> -C
> -
Hi I tried to do an update on my Iphone 4 hardware but it failed (dont knoyw why) I followed instructions to restore my Iphone unfortunatel all im left with is an image of itunes with a usb and a dead phone can someone help???
Hey, I aggree with Tempelton for the most part, but if you are an advanced user on the computer on the phone, there is one thing you can try. There is a program called RecBoot, which might help you, and here is a page that might help you. http://jaxov.com/2010/05/recboot-iphone-recovery-mode/ If you are not an advanced user, I would NOT recomend using RecBoot, and just proceeding with the restore. A little consolation could be that you probably had Photo Stream on, and you might have been backing up to iCloud, which should mean you'll have some stuff after the resote. Sorry this happened!
-
Photo Elements 12, Mac OS X 10.9.5, Trying to combine two images side by side, same height. Get this message: "Panorama could not be created as some images could not be automatically aligned". Tried with several different images, same height each combo
One does not "see" the images when selecting; You just select two file names, click OK, PhotoShop does the rest, and comes back with same message.
-
Hi there,
How can we call a background image to a TD in a table. I have imported the images to HTMLDB instance and reffered to my class as follows:
.toptab {background: url("#WORKSPACE_IMAGES#toptabl.gif") top left no-repeat;
But it doesn't display the image, is it bcoz CSS doesn't compile this URL: <b>#WORKSPACE_IMAGES#toptabl.gif" </b>
Can any tel me the workaround for this..?
thx,
r@vi.See Use uploaded images in uploaded CSS and Re: 2.2 uploaded css files, images and substitution strings
-
"Merge to HDR" & "Align Images" will not work with 5000+ pixels
Merge to hdr will work almost instantly for any size image as long as you dont use the "align Image" function. When used, it drastically slows down at about 4000 + pixel images then craps out completely at 5000 + pixels.
I dont get it, worked just fine in CS2, now it doesnt work in CS4?
merge to hdr is useless without the "align" functionHi,
The Ps CS6 public beta version contains the same camera support as found in Ps CS5/5.5 compatible CR 6.6. There will be future updates to CR 7 for Ps CS6 to pick up more camera support. The Nikon D800 NEF files are not supported, yet.
If you like to work with your D800 files in the public beta build now, you'll have to get the DNG Converter 6.7 from here: http://labs.adobe.com/technologies/cameraraw6-7/
and convert your files to DNG.
regards,
steve
Maybe you are looking for
-
Possible bug: Saving array with extended and double precision to spreadshee​t
If one concatenates a double precision array and an extended precision array with the "build array" vi and then saves using "Write to Spreadsheet File" vi any digits to the right of the decimal place are set to zero in the saved file. This happens re
-
How to fax several files (jpg, pdf) as a single fax?
Hi I want to fax a few files together as one fax (2 x jpg, 1 x pdf). In Windows it used to be a fax with attachments but what is the way in Leopard? Many thanks
-
Dear Gurus!!! I'm analyzing the growh of the data base, but I have any questions: 1. The field "Lin Delta", ¿Are record of the table? 2. The Total Size (KB) of the DB is = Tabla + primary Key + Indexes? 3. For What The total size of the Db is difer
-
ITunes stops responding upon connection iPod (80GB)
I have done the "5 R's" several times to no avail. Within 30 seconds of connecting my iPod, (right after it show in the windows) iTunes freezes (not responding). I can see my iPod in Explorer as drive "L". Any help would be greatly appreciated! Also
-
Can't render out of Motion 5 - it's all corrupted!!
Hi all, Any help greatly appreciated - it doesn't matter what I do, everything I render out of the new Motion is totally corrupted - sample frame below (all look a little like this): Nasty! Everything looks great up until render. Tried numerous compr