All Department's should report to one Position
How can I show All Department's reporting to one Position in reportiing structure
please throw some light on this....
I ran PPSS Transaction code by giving evaluationpath SAP_ORG when i see in reporting structure Its not displaying....
There are 5 department's report to one position....
I can see PPSS Transaction Code is for diaplay Not able to save evaluation path when I run PPSS...
Could you check once please let me know about this
Sorry, it is the evaluation path SAP_ORG that you need to use. Please check out the details in table T778A.
Hope it helps,
Kind Regards
Christine
Similar Messages
-
How to display all rows in the report in one page in Oracle APEX 3.2
Friends -
We are using Oracle Applications Express 3.2 on oracle database 10.2.0.5 on solaris environment.
One of our report contains total no of rows 50000. when we ran report by default it is showing 15 and i can go search and change display no of rows to different numbers and click go.
My question is it possible to display all 50000 rows during first time report launching without going to change rows. Is there any option that we can set how many number of rows that we can display during report design.
Please advise
VSHHello VSH,
>> My question is it possible to display all 50000 rows during first time report launching without going to change rows
As vee pointed out it is possible, however the question you need to ask yourself is is it wise?
Bear in mind that displaying 50,000 rows on a single HTML page means a lot of code that must be loaded by the client browser all at once. What it will do to your page loading time? Browser memory? Network bandwidth? Also, do you really believe that it is effective to let an end user look for a specific row among 50,000 rows?
Regards,
Arie.
♦ Please remember to mark appropriate posts as correct/helpful. For the long run, it will benefit us all.
♦ Author of Oracle Application Express 3.2 – The Essentials and More -
Is there any report where we can see more then one position assigned to emp
Hi
Is there any report where we can see more then one position assigned to employee.
Basically requirement is that some of employees got assigned two positions by mistake, so I want to know the standard report to find out such employees.
Thanks & Regards
RajeshHi,
Use RHSTRU00 report with object type P and evaluation path P_S_S_C.
Regards,
Dilek -
How to show view tab Main Report and all of Sub Report in one action through Visual FoxPro
How to show all view tab (Main Report and all of Sub Report) in one action.
I already know how to show Main Report with this code sample:
oRptRun=createobject("CrystalRuntime.Application")
oRptView=this.Parent.oleRptViewer
oRptOpen=oRptRun.OpenReport('MyReport.rpt')
oRptView.ReportSource=oRptOpen
oRptView.ViewReport
Inside the 'MyReport.rpt' it has 2 subreports:
1. MySubReport_1
2. MySubReport_2
I try to show MySubReport_1 and MySubReport_2 together with their own Main Report with this code sample:
oRptRun=createobject("CrystalRuntime.Application")
oRptView=this.Parent.oleRptViewer
oRptOpen=oRptRun.OpenReport('MyReport.rpt')
oRptSub1=oRptOpen.OpenSubreport('MySubReport_1')
oRptSub2=oRptOpen.OpenSubreport('MySubReport_2')
oRptView.ReportSource=oRptOpen
oRptView.ViewReport
Did I miss something because there was only view tab 'Preview' (Main Report) shown without view tab MySubReport_1 and MySubReport_2.
Thank you.Your right, there is only one tab to view the report.
To open the subreports you will need to click on them in the main report. I don't know of a way to open them programmatically like you are doing here
http://diamond.businessobjects.com/robhorne</a> -
My wife and I get our iPhone 4s tomorrow. Should we put them both on the same Apple ID, or should I create one for her. All our apple products are on mine at this time.
The answer to this kind of depends on what you both want to do. Apple IDs can be used for multiple Apple services. For example you could both have your own iCloud Apple IDs (which I would suggest), but have only one iTunes Store Apple ID.
So think about how you will each use the iPhones then make your decision. Keep in mind that if you both use the same iCloud Apple ID you will receive each other's texts and emails and all the email, contacts and calendars will be the same. -
One position reporting to more than one position in other org unit
Hi Experts,
How to map in SAP if One position is reporting to more than one position in other org unit. plz explain me the in detail.
Regards,
Saumya Chawan.Hi Saumya,
First you have to decide on the relationships you want for this position. The question is - who will decide pay increases for this position?...who will approve vacation time? That manager is the one who is the directly managing the position and so the position must be in the org structure for that manager's org unit.
Second, what is the relationship to the other manager? This is usually a "dotted-line" or functional reporting relationship to another position. You can use a standard relationship such as 005 or create your own.
Then you can use the Matrix to create the two relationships. Easy Access: Human Resources --> Organizational Managment --> Organizational Plan --> Matrix (transaction PPME). Use the "Standard selection" and create the two relationships between the position and the org unit and other position (or other object depending on your requirement).
Paul -
Download all the Dashboard reports to one excel tab
Hi,
I have 2 separate reports in Dashboard,can i download this Dashboard reports to one excel page for user validation process.Currently i only see HTML and PDF options for complete Dashboard donwload.
Thanks in advance.You cannot directly download all the requests on a dashboard to Excel. A workaround is to click on the print dashboard button and select HTML. Save this HTML file as a xxx.mht. Now open the xxx.mht with Excel. Doesn't look great but is readable.
Hope this answers your question. Please award points if helpful.
Thanks,
-Amith. -
Linking one Position To All Organizations
Hi All,
I need a way to link common positions like (Driver) to be available for all the organizations in the company.
so that, we will have to create it only once.
Thanks in advance.position can be linked to one and only organization.
if you require to have one title available for all orgs; you have to go through jobs.
just define the job "driver" and in the assignment screen add this job to all drivers and no need to add positions for these employees.
good luck -
BW HR Reporting Issue- Vacant Position & Filled Position
Hi All,
I am using the standard extractor 0hr_pa_os_1, it brings up two records for a position one with no pernr & with pernr. Loaded in the same way to cube.
In my report I am trying to display number of filled position and number of vacant positions. When I run the query it displays two entries for a position one with employee ID and the other with '#' sign. I tried to exclude the '#' employee from the report but it also removes the position which is vacant.
Example,
Position | Employee | Filled | Vacant |
1002 | 7009 | 1 | 0 |
1002 | # | 1 | 0 |
1003 | # | 0 | 1 |
Total shows as filled = 2 & vacant = 1. which is incorrect filled should show only 1, as the records in the query displayed twice I am getting the total as 2.
when I exclude '#' from employee, it removes the position 1003 from the report and I am not able report on vacant position.
Pls let me know is there a way to solve this.
Regards,
AnandHi,
looking at the data example, there could be couple of options.
1) Exceptional aggregation on Position
Create a formulae KF on the top of base KF with exceptional aggregation with reference to position to show unique count of position.
2) Restricted KF
Create 2 separate restricted KFs one each for filled and vacant. For filled, set a fillter condition of pernr ne '#' and for vacant the condition would be pernr eq '#'.
Hope this helps?
Thanks. -
One position multiples relationships
Hi Gurus,
I have a scenario with my client.. There is a position (12345678) now this position is been occupied by 3 employees.. i have done that through percentage basis.. i hope i am correct till here.. now the client req is these three employees have to report to three different managers..
can any please let me know how to give this kind of relationship when the position is same.
Regards
SwathiHi Swari,
You are right. Employees having same position will have same manager. Thats the reason you assign multiple employees to one position.
You need to explain this to your client.
If client wants employees to report to diffrent managers then you should create 3 diffrent positions reporting to 3 diffrent managers.
This is SAP's best practice. If you implement in this way it will help in OM reporting and MSS implementations.
If you deviate from SAP best practice your client will be in trouble in future.
If you want to deviate from SAP best practice, you can create Custom "Z" relationships between employee P and Manager's Position S and maintain 3 diffrent managers for all 3 employees on same position. This will have a big impact on OM and MSS and needs through investigation.
Regards,
Amit. -
Some Devices are not showing up at all in the Discovery reports
Hi all,
The first time I ran the CS device discovery I got 50 reachable devices. I scheduled the Device Discovery to be run every week. I added more subnets to the discovery but unfortunately the last discovery shows only 31 devices from the first discovered devices (50). I checked the DCR and there is only 44 devices out of the 50!
My question is:
Should not the scheduled Device Discovery discovers all devices -the previously discovered ones and the new ones-?
Why the rest of the devices are not showing up at all in the discovery reports (neither reachable nor unreachable) although all of them are pingable and responding to the snmpwalk tool from the CWLMS server.
Your kindly respond is highly appreciated.
Thanks in advance.I ran the discovery again with the same settings after enabling debugging and I checked the following log files:
1. in the ngdiscovery.log I found a lot of errors all about Duplicate IpAddress example:
ERROR [DeviceManager : EvalTask-DiscoveryThreadPool-06 addNewDevice] : Duplicate IpAddress (127.0.0.51) found in addNewDevice().Device 1 ip = 10.8.113.29 , id1 = 127.0.0.51*F1COR.xyz.com*.1.3.6.1.4.1.9.1.283, Device 2 ip = 10.8.113.106 , id2 = 127.0.0.51*LCD.xyz.com*.1.3.6.1.4.1.9.1.283
ERROR [DeviceManager : EvalTask-DiscoveryThreadPool-08 updateDevice] : Duplicate IpAddress (127.0.0.51) found in updateDevice().Device 1 ip = 10.8.113.93 , id1 = 127.0.0.51*UDS.xyz.com*.1.3.6.1.4.1.9.1.283, Device 2 ip = 10.8.113.73 , id2 = 127.0.0.51*F2COR.xyz.com*.1.3.6.1.4.1.9.1.283
ERROR [DeviceManager : EvalTask-DiscoveryThreadPool-09 addNewDevice] : Duplicate IpAddress (10.8.113.42) found in addNewDevice().Device 1 ip = 10.8.113.42 , id1 = null, Device 2 ip = 10.8.113.86 , id2 = 10.8.118.251*OPS.xyz.sa*.1.3.6.1.4.1.9.1.501
2. in the CSDiscovery.log:
Error while changing the permission of the file C:\PROGRA~1\CSCOpx\objects\csdiscovery\1348\DiscoveryStatusObj
I checked the file and the casusers has a Modify permission
My Question is:
1. what is the meaning of those output exactly?
2. If CWLMS found duplicatedd IP address how it works in terms of (ignoring, updating existing devices, Adding the new devices, ... etc)
Many thanks for your help. -
Migrating a webi report from one environment to another using import wizard
Hi Everyone,
Can anyone please tell me what all access should I have on my ID to be able to migrate a webi report from one environment to another environment(e.g. from development to quality).
Regards,
Neeraj SharmaHi,
To use the Import Wizard utility, you basically need Administrator, Full Control to Top-level folder, and "Add objects to the folder" and "Edit objects" for this user on the root folder.
You need the least restrictive role, because you require absolute control for content promotion between 2 entitlement systems.
the webi document is the cherry on-top, you;ll have universes, connections, folders to bring over too.
Regards,
H
p.s. check Note 1450708 - How to restrict access to the Import Wizard from a Business Objects Enterprise system
and
Note 1297121 - What rights needed to use Biar File Extraction for a normal user while using Import Wizard ? -
How to schedule webi report in bulk (multiple report in one request)
hi,
I am little bit new to BOXI. I have little bit work experience in Crystal X on scheduling which was used in one of our enterprise java application. We are exploring options in BOXI.
Currently i am scheduling a report with following api
infoStore.schedule (webiDocs);
This will schedule one report instance.
My question is
Is there any way to schedule multiple instances of a same report in one request.
Is there any way to schedule multiple instances of a different report in one request.
If above things are possible please provide the apis for the same.
thanks in advance
ShreenidhiScheduling multiple Webi reports in one command:
infoStore.schedule takes 1 arhgument of type IInfoObjects which is a collection of InfoObject. IInfoObjects is retrieved by the query. So if you to retrieve all the Webi Docs you want to schedule , then with infoStore.schedule(WebiDocs), it will schedule them all in 1 shot. Scheduling Info properties for each Webi Docs should also be set. Please refer to the samples on scheduling at link below.
https://boc.sdn.sap.com/node/3211
Scheduling one Webi Doc multiple times in one command:
I donu2019t think it can be done in one command. Do you want to schedule the object multiple times each time running it with different prompts? Or do you want it to be sent to different destination in each schedule? Otherwise you can schedule it once and then access the scheduled instance multiple times.
I hope this helps.
Regards
Aasavari -
How to move a report from one account to another account
Dear all ,
How to move a reports from one account to another account.
These are reports sent automatically. Unfortunately, I do not know where to find them and how to export to another account.
PuruHi,
You can use the Transaction SCC1 to move the data from One Client to Another Client for a Client dependent table.
The data should be present in a Transport and you can import to Transport to any client using SCC1.
Contact the Basis team to know how to use SCC1.
Regards,
Aj -
More than one updatable report on one page.
I hope someone can help me with this.
I've spend a long time looking for the best way to do this but keep running into APEX constraints.
My problem is that I have two tables;
1) an 'object' table with static attributes (that can change value but keep no history).
2) an 'object attributes' table with attributes that can change over time (i.e. keep a history).
Some of the attributes are optional and some mandatory irrespective of whether they are static or timestamped.
I want to design a screen that shows both tables on one page - preferably both updatable on the same screen.
Selecting/clicking a row in the top table (object) will select the appropriate object attribute rows in the table below (I've got that covered - no help needed there).
If I create a new object record I also need to create an initial object attributes record.
This first initial attributes record cannot be deleted while the object exists.
The start date of the object itself and its first object attributes record should remain in sync.
I cannot separate the object table and attributes tables on different pages as all static and timestamped attributes form one collection that needs to be visible and maintainable from one screen.
The problem is APEX will not allow more than one updatable (or interactive) report on one page.
I need a solution where both tables are maintained in a uniform way for the user.
Not, for instance, one table an updatable report and the other a report with detail form.
Anybody struggle with a similar problem and found a solution to this problem?
Any pointers are most welcome.
Ruud.
PS. I have a joined view on both tables with an INSTEAD trigger that can process insert/update/delete's on the combined data however I would not like to use that if I can avoid it. It would mean a repetition of static attributes in the one updatable report.Andy,
Apologies for the late reply - Forums have been out for a while :-(
Thanks for the suggestion. I've had a look at Denes' example and
at least now I know it is possible.
I've asked for access to his workspace but have not been given that
yet so can't look at the details yet but I can make some educated
guesses as to how it was done.
I will give it a try.
I'm still not certain whether having 2 updatable tabular reports is the
right way to go though....
Currently I'm working on a page with 2 navigator reports - one for selecting
the object and another to select the start date of the timestamped attributes.
Next to that I have an updatable detail form that shows the selected object
and attributes as one whole set using the joined view I mentioned earlier.
Inserts, updates & deletes are then done in the form.
Ruud.
Maybe you are looking for
-
Muse CC crashing when embedding HTML
Trying to embed a YouTube video into a Muse site with Muse CC and is crashing every time. Is this a known issue? Is there a work around?
-
How to call a function having OBJECT type as Return type
Hi, I've the following function returning OBJECT type. Pease advice me how to call this function CREATE OR REPLACE TYPE GET_EMP_OBJ is object ( emp_name varchar2(50) , mgr_id number, dept_id number CREATE OR REPLACE FUNCTION get_emp(P
-
Choosing a file using a file browser in a dialog
Hi, I'm writing a script and i want it to have a "browse" button so i can choose e file in a file browser. I checked out InDesign's dialog elements and i couldn't find it. any ideas?
-
I clicked on my iphoto app, it wouldn't launch. Then I accidentally removed the app from my dock. How can I recover iphoto?
-
Dear all, I am a certified BW 2.0 Consultant that also followed the delta courses for both 3.0 and 3.5. However, if I want to become a certified BW 3.5 Consultant, I need to do a complete certification again. I already received hardcopies of most of