All files posting as created or modified at 12:00 a.m.
Sorry - don't know the appropriate category where this question should be posted. But since I've installed Leopard, all my downloaded files show as being created at 12:00 am. (Word documents, PDFs, anything!) Clearly this is not the case. Any suggestions? Seems this is a default setting that needs to be booted out! Thanks for any help.
Yes, but did you check your present IP, or the last one?
I'm also wondering if it could have anything to do iwth the fact that I have very big inboxes & sent mail boxes.
Not likely.
Wasn't sure if rebuilding my mailboxes might help - my mail program isn't finding files properly either.
Not likely to do with the sending problem, but...
Not certain, but this can fix myriad Mail problems...
Safe Boot from the HD, (holding Shift key down at bootup), it will try to repair your Disk Directory while the spinning radian is happening, so let it go, run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, then move this folder & file to the Desktop.
Move this Folder to the Desktop...
/Users/YourUserName/Library/Caches/Mail/
Move this file to the Desktop...
/Users/YourUserName/Library/Mail/Envelope Index
Reboot.
If that doesn't do it and you can afford to redo all your Rules, try these & reboot...
/Users/YourUserName/Library/Mail/MessageRules.plist
/Users/YourUserName/Library/Mail/MessageRules.plist.backup
Note, in 10.5 & up /Users/YourUserName/Library/Caches/Mail/ may or may not exist.
Similar Messages
-
How can I create a array with all files from a directory
How can I create a array of files or varchar with all files from a directory?
I thought the example could be improved upon. I've posted a solution on my blog that doesn't require writing the directory list to a table. It simply returns it as a nested table of files as a SQL datatype. You can find it here:
http://maclochlainn.wordpress.com/2008/06/05/how-you-can-read-an-external-directory-list-from-sql/ -
Does iPhoto 09 create a modified file when an image is rotated?
Does iPhoto 09 create a modified file when an image is rotated.
What about preview?
ThanksIf you use iPhoto, than use iPhoto. Remember, the modified file is usually much smaller than the original, it is really more of a preview. And if you do any other editing, you don't create multiple modifieds, iPhoto puts all your edits, including rotation, in one modified file.
Preview does not claim to be lossless, so it probably does not create a behind the scenes modified image. -
"Date Modified" for all files being changed if "Automatically write to XMP" is on
Recently upgraded from LR3 (v3.4.1) from LR2 on OSX 10.6.8 and have always had Catalog Settings > Automatically write changes into XMP turned on.
When browsing existing JPG files in my Library (no Develop changes, no keywording, no Presets, no Import), LR3 is writing to disk — i.e., when I look at files in Finder, almost every viewed file’s “Date Modified” is being set to today’s date and time. (It actually creates a .swp file, then changes it's name back to .jpg)
This is really bad, as it's making it impossible for me to use Finder to figure out when I last worked with a file, it is triggering needless Time Machine and Backblaze backups, and unnecessarily churning my disk.
If I turn off "Automatically write..." this behavior stops. Per David Marx at thelightroomlab.com, I tried turning off this preference, manually doing a "Save Metadata to File" for all files, letting that complete, then turning the preference back on. This does not solve the problem.
Per a suggestion at photoshop.com, I used ExifTool to see what changes LR was writing to a sample file; from the diff below, you can see that LR is adding a bunch of new fields as well as moving other fields around. But my point is that LR3 should never overwrite a file on disk if all I am doing is browsing thru them.
Is anyone else seeing this? Any ideas would be greatly appreciated!
-- David
diff Exif5609_original Exif5609_update
2c2
< FileName: DSC_5609_original.JPG
> FileName: DSC_5609_update.JPG
5,6c5,6
< FileModifyDate: 2009:11:27 21:32:54-08:00
< FilePermissions: rwxr-xr-x
> FileModifyDate: 2011:08:07 22:06:47-07:00
> FilePermissions: rw-r--r--
27a28,29
> ShutterSpeedValue: 1/200
> ApertureValue: 7.1
55d56
< SerialNumber: 3209521
75d75
< Lens: 18-200mm f/3.5-5.6
185,188d184
< UserComment:
< SubSecTime: 00
< SubSecTimeOriginal: 00
< SubSecTimeDigitized: 00
211a208,299
> XMPToolkit: Adobe XMP Core 5.2-c004 1.136881, 2010/06/10-18:11:35
> CreatorTool: Ver.1.00
> MetadataDate: 2011:08:07 22:06:47-07:00
> SerialNumber: 3209521
> LensInfo: 18-200mm f/3.5-5.6
> Lens: 18.0-200.0 mm f/3.5-5.6
> ImageNumber: 26634
> RawFileName: DSC_5609.JPG
> SavedSettingsName: Import
> SavedSettingsType: Snapshot
> SavedSettingsParametersVersion: 6.4.1
> SavedSettingsParametersProcessVersion: 5.0
> SavedSettingsParametersWhiteBalance: As Shot
> SavedSettingsParametersIncrementalTemperature: 0
> SavedSettingsParametersIncrementalTint: 0
> SavedSettingsParametersExposure: 0.00
> SavedSettingsParametersShadows: 0
> SavedSettingsParametersBrightness: 0
> SavedSettingsParametersContrast: 0
> SavedSettingsParametersSaturation: 0
> SavedSettingsParametersSharpness: 0
> SavedSettingsParametersLuminanceSmoothing: 0
> SavedSettingsParametersColorNoiseReduction: 0
> SavedSettingsParametersChromaticAberrationR: 0
> SavedSettingsParametersChromaticAberrationB: 0
> SavedSettingsParametersVignetteAmount: 0
> SavedSettingsParametersShadowTint: 0
> SavedSettingsParametersRedHue: 0
> SavedSettingsParametersRedSaturation: 0
> SavedSettingsParametersGreenHue: 0
> SavedSettingsParametersGreenSaturation: 0
> SavedSettingsParametersBlueHue: 0
> SavedSettingsParametersBlueSaturation: 0
> SavedSettingsParametersFillLight: 0
> SavedSettingsParametersVibrance: 0
> SavedSettingsParametersHighlightRecovery: 0
> SavedSettingsParametersClarity: 0
> SavedSettingsParametersDefringe: 0
> SavedSettingsParametersHueAdjustmentRed: 0
> SavedSettingsParametersHueAdjustmentOrange: 0
> SavedSettingsParametersHueAdjustmentYellow: 0
> SavedSettingsParametersHueAdjustmentGreen: 0
> SavedSettingsParametersHueAdjustmentAqua: 0
> SavedSettingsParametersHueAdjustmentBlue: 0
> SavedSettingsParametersHueAdjustmentPurple: 0
> SavedSettingsParametersHueAdjustmentMagenta: 0
> SavedSettingsParametersSaturationAdjustmentRed: 0
> SavedSettingsParametersSaturationAdjustmentOrange: 0
> SavedSettingsParametersSaturationAdjustmentYellow: 0
> SavedSettingsParametersSaturationAdjustmentGreen: 0
> SavedSettingsParametersSaturationAdjustmentAqua: 0
> SavedSettingsParametersSaturationAdjustmentBlue: 0
> SavedSettingsParametersSaturationAdjustmentPurple: 0
> SavedSettingsParametersSaturationAdjustmentMagenta: 0
> SavedSettingsParametersLuminanceAdjustmentRed: 0
> SavedSettingsParametersLuminanceAdjustmentOrange: 0
> SavedSettingsParametersLuminanceAdjustmentYellow: 0
> SavedSettingsParametersLuminanceAdjustmentGreen: 0
> SavedSettingsParametersLuminanceAdjustmentAqua: 0
> SavedSettingsParametersLuminanceAdjustmentBlue: 0
> SavedSettingsParametersLuminanceAdjustmentPurple: 0
> SavedSettingsParametersLuminanceAdjustmentMagenta: 0
> SavedSettingsParametersSplitToningShadowHue: 0
> SavedSettingsParametersSplitToningShadowSaturation: 0
> SavedSettingsParametersSplitToningHighlightHue: 0
> SavedSettingsParametersSplitToningHighlightSaturation: 0
> SavedSettingsParametersSplitToningBalance: 0
> SavedSettingsParametersParametricShadows: 0
> SavedSettingsParametersParametricDarks: 0
> SavedSettingsParametersParametricLights: 0
> SavedSettingsParametersParametricHighlights: 0
> SavedSettingsParametersParametricShadowSplit: 25
> SavedSettingsParametersParametricMidtoneSplit: 50
> SavedSettingsParametersParametricHighlightSplit: 75
> SavedSettingsParametersSharpenRadius: +1.0
> SavedSettingsParametersSharpenDetail: 25
> SavedSettingsParametersSharpenEdgeMasking: 0
> SavedSettingsParametersPostCropVignetteAmount: 0
> SavedSettingsParametersGrainAmount: 0
> SavedSettingsParametersLensProfileEnable: 0
> SavedSettingsParametersLensManualDistortionAmount: 0
> SavedSettingsParametersPerspectiveVertical: 0
> SavedSettingsParametersPerspectiveHorizontal: 0
> SavedSettingsParametersPerspectiveRotate: 0.0
> SavedSettingsParametersPerspectiveScale: 100
> SavedSettingsParametersConvertToGrayscale: False
> SavedSettingsParametersToneCurveName: Linear
> SavedSettingsParametersCameraProfile: Embedded
> SavedSettingsParametersCameraProfileDigest: D6AF5AEA62557FCE88BC099788BBD3CC
> SavedSettingsParametersLensProfileSetup: LensDefaults
> SavedSettingsParametersToneCurve: 0, 0, 255, 255
> IPTCDigest: d41d8cd98f00b204e9800998ecf8427e
228,230d315
< SubSecCreateDate: 2009:11:27 21:32:54.00
< SubSecDateTimeOriginal: 2009:11:27 21:32:54.00
< SubSecModifyDate: 2009:11:27 21:32:54.00
http://feedback.photoshop.com/photoshop_family/topics/lr3_date_modified_for_all_files_bein g_updated_when_browsing_photos_if_catalog_settings_automatically_write_changes_into_xmp_is /replies/6313647clvrmnky wrote:
davidpope007 wrote:
Then when LR3 loaded my old LR2 images into memory, it "dirtied" the in-memory copy of the file by adding in these new LR3 XMP fields. Then, because I had "Automatically write XMP" on, it said "I better write these changes to disk".
Yuck. As a former software engineer, this is very bad software engineering.
It should wait until the user dirties the file (via Develop, keywords, etc.) before presuming to add a bunch of metadata fields that are unique to the new version of LR3.
Well, I'm a current software developer, and this is, really, a perfectly reasonable thing to do. It is a reasonable trade-off for a convenient feature required by a small subset of users.
Yes, in most cases the in-memory copy should "never" be dirtied unless the user makes a gesture of some sort, but like I said earlier, this option (once set by the user) sets up the situation where this gesture becomes implicit. This is a clear trade-off for the sake of convenience. And if the XMP is out of date and needs to be updated en masse, so be it.
The fact is, there is no easy way around this. Do we save up /every/ dirty buffer somehow until you make a gesture that /might/ require the XMP to be up-to-date before acting on that gesture? Now we have to worry about unflushed buffers if something goes wrong and the app exits. Do we save the buffers to the DB? Now we have to block some calls to make another blocking call to flush some or all of those to DB, and then write some or all of it out to one or more files. In what order? What if there is a gesture to have X files with up-to-date XMP and some or all of those are in unflushed buffers, unflushed DB writes or we have to wait for the DB.
As you can see, this is a transactionality nightmare, and the easiest and safest thing to get what the user wants (i.e., up-to-date XMP for the purpose of talking to a third-party XMP aware app) is to simply update the sidecar or XMP block in an atomic manner using the correct file IO. The file will have to change at some point, so it may as well be now.
[Thanks to both of you for your detailed replies. I am aware of the need for tradeoffs so when you say the approach taken is quite reasonable, I do believe you. I also apologize in advance for the length of the following and am extremely aware of the time it must have taken you to compose the above replies, but I'm going to add a bit more, if only for my own piece of mind and in hopes of coming up with a solution for my workflow.]
From my naive point of view, I was expecting the answer to be simply "don't raise the XMPDirtyFlag upon reading in a file". Obviously if your architecture requires you to "upgrade to latest XMP format" upon read, and another part of the system auto-detects "out of date XMP", then it's going to write those changes to disk.
But it didn't need to be designed that way. LR obviously has mechanisms to know when a user has made a change to XMP so it is able to write XMP changes to disk only when necessary.
The promise (to me) of "Automatically Write XMP changes to disk" was to auto-save my changes, and not those made for any internal (i.e., XMP versioning related) changes.
Perhaps the premise is that it is LR3's job to update an individual file's XMP to the latest version so that other XMP-aware apps can make use of it? I would argue that those third-party XMP-aware apps already have to know how to deal with all prior versions of XMP, so LR3 should just leave well enough alone.
You asked if my problem with your approach was that it was "inelegant"; not at all, it is based on my own perception of what I need from my workflow, so let me describe that so maybe we can find a better way:
* Part of the appeal of LR to me is that it preserves my original file as it came off the memory card, allowing me to move to a different workflow/toolset in 2025 if I choose to do so
* However, with all of changes contained in a single database file, I'm concerned about rare (but possible) corruption, so to mitigate this risk, I let LR backup my database weekly and it's also backed up continuously in the cloud via Backblaze
* Even with backups of the database, there is still a chance that I could lose changes made to individual files (e.g., LR corrupts the DB and I have to go back to last week's DB)
* Thus the appeal of the "auto-write to XMP" flag -- that way critical changes (develop, crop, keywords) are saved on a per-file basis; I liked the "automatic" part of this (as opposed to a manual save) because then I don't have to teach others in my family how to manually save XMP changes
* A nice side-effect of this setting is now when I use Finder to find a file and double-click on it to edit it in Photoshop, all my develop changes are right there; (in other words, I like the flexibility of not having to fire up LR in order to just invoke PS from within it); also when I use Bridge I see all the keywords there
* So with LR2, I had gotten used to what I thought was the best of all worlds -- autosave of changes at the file level via XMP + raw negatives untouched (i.e., Date Modified == the date I took the picture); this allows me to use operating-system-level tools -- Finder -- to locate/search for files
* Now I upgrade to LR3 and I'm finally now understanding that a concept "XMP versioning" is going to result in changes to many, but not all my files. (That's something else that's annoying about this issue -- I open up the Grid and browse a folder of files, and only seemingly random ones I've cursored over seem to get written to disk -- if it's so urgent that LR3 update the XMP, then it should do it for all the files in the catalog or at least in that directory)
Here's a screenshot from Finder of what I see everytime I look at this folder:
* So now I have to assume that each new version of XMP and/or LR is going to touch my files on disk. Sigh.
* What I don't like about this is that it is ruining the promise of "untouched raw negative". Yes, the image data is untouched -- which I agree is most of the benefit; but the file has been touched.
* Perhaps you might empathize a bit more if you imagined that someone went thru all your source code or Word files and randomly changed the date to "today" because you upgraded compilers or moved to Word 2011.
I agree all of this would be solved by having an XMP sidecar file for JPGs, but you indicate that's not going to happen.
You've also alluded to the solution of "resetting the Date Modifed" to it's original value -- which I believe is what Finder does when you move or copy a file -- but that that is fraught with issues as well. I believe you when you say there are issues, but again the naive part of me wonders why that soultion would be so bad...
I just thought of another potential solution -- turning on Date Created in Finder -- but it turns out that's changed, too.
I am really at a loss as to what to do and would welcome your suggestions.
Thanks again and kind regards,
-- David -
Created and modified dates all the same
Clock is displaying the correct time but for all types of files the created and modified dates are all displaying the one date. Any suggestions?
Thanks for your input. I want to keep the files with a 1 or ~1 as it happens and delete the rest. I have written some scripts. I think I could write a script to delete all files with a 1, but of course that is not what I want. I guess
I need a script to delete all files except if they contain a 1. I haven't used a forum since way back in the PC mag days.
Whoops..........I just realized exactly what you were telling me and used your suggestion. I guess I was trying to do more work than I needed. I searched for all files with a 1 in the folder and then moved them to a different folder. Then
I deleted the rest. Job done. Thanks for the help. -
I am trying to import standard midi file that I created in Band in a Box into Logic Pro 9. I can not get all the track to play with internal instrument sounds... only the piano track. how can I get the others to play... drums, bass etc???? Help
Don't drag the midi into an open Logic project. The tracks won't set up correctly.
'Open' the midi file with Logic as if it were a Logic project. Then all the tracks will be set up so you can start editing them and applying better saved sounds and instruments, but you'll be at a starting place where you can hear what's going on. -
How can I search and find all files modified since december 1st 2010
I just want to see all the files that have been modified on my Windows Server 2008 since December 1, 2010. I want to see if there is anything unusual. Is this possible without 3rd party software?
I support 2 Windows Server 2008. On one of them, I can't seem to get any advanced search options until I type at least one character in the name of the file I am searching for (but I want to search all files). Even then, the search is slow, it
tells me it did not bring back all results because there are too many and the results window is too awkward to navigate. On the second server, when I click in the search box, it has buttons I can click, one is "Date Modified" but they only have predefined
options like "Last week" and "yesterday".
Every version of windows explorer gets worse and worse at searching. I rarely use it anymore. I usually install "Search Everything" from voidtools.com. You can download, install, index, and search and get your results all more quickly than
finding the results in windows explorer.Hi,
It should be caused that Windows Search is not installed on the second server. See following steps to install it:
1) Start Server Manager
2) Click on Roles in the left navigation pane
3) Select Add Role in the Roles Summary pane to the right
4) Select the File Services role and click Next
5) Select the Windows Search role service and Finish the wizard.
Meanwhile, when you search for a file such as "data", input keyword data and click the Advanced Search at the bottom to result box. Then you can select "Data and modified" and "is after" December 1, 2010
Shaon Shan |TechNet Subscriber Support in forum |If you have any feedback on our support, please contact [email protected] -
Ok i have indesign CS6 and all files are stored on a 10.7.5 MAC server. This just started happening. When I open a file indesigns is creating a textfile in the same folder? I need some help on this.
Ask in the ID forum and be much more specific about your configuration. there could be any number of reasons why manifests, temp files or restore files are created.
Mylenium -
I changed my Seagate 1 Tb hard disc under the Apple Exchange Program.I received the iMac and the Apple Store created a new account on my iMac ("User"). I connected the Time Machine and ran the migration assistant. All files etc. have migrated. I can see the Macintosh HD and my old user account but am not allowed to open them. How can I get back to my old settings etc.?
what is the message that you get when you try to open a file?
1. You can try to change the permissions to see if they will allow you to write to the file(s).
2. Naviagte to your Home folder Macintosh HD-->Users-->Username and press command+i to get info and on the bottom of the screen click on the lock and unlock the security check, remove your current username and then re-add it and next to the minus symbol click and select apply to enclosed folders -
why my itunes cannot create aac.. already right click.. same.. unistall all file.. install back.. also same...
Manmira,
Have you gone to Edit > Preferences > General > Import Settings to make sure that "Import Using" is set to "AAC Encoder"? -
How to make a category required for all files created within a folder
I've defined a category. It has attributes which have been flagged as required.
When I view the properies of a particular workspace (library), the category is shown as available to the workspace. However, the category is not shown as required. And the "required" checkbox is not clickable.
So .. how, from the OCS DHTML applet, do I make a particular category a required category for all files in a folder?Perhaps the Category Attribute is not marked as "configurable" when it was created. You can check this by "switching into Admin Mode" and drilling down the Categories using "Manage Categories" link. Check if the category attribute is marked as configurable or not.
Ravikiran -
1.- I´m creating a Muse site which contains videos, photos and sound. All videos, sounds and pictures are located in diferent folders in my PC. Since Muse doesn't organize the project and its files like Dremweaver (all files in a single folder). How can I manage my site (containing all the media) in order to upload it to a server?
2.- Is there a Adobe Muse community in spanish language?
Thanks for your help
Mauricio444Kevin is suggesting that you store the projects you create while working through his book in a folder called RoboHelpProjects. It is not where you have to store every project you ever create.That is for the purposes of his book.
RoboHelp initially defaults to My RoboHelp Projects but it's up to you whether you do. Generally on the forums we advise against that as it is part of your profile and can result in excessively long path names in a few cases. Generally where authors create file names that are so long they almost serve as the content.
Projects always have a root folder, call them Project 1 and Project 2 for this purpose. You can have those folders directly off your C drive (or other local partition) or within in a parent folder as above.
Now to what you can and cannot do. You can delete a whole project by selecting Project 1 or Project 2 in Windows Explorer. Obviously if you delete the parent folder you will delete all your projects within.
What you must not do is delete individual files within a project using Windows Explorer, for that you use RoboHelp's Project Manager. The exception is if you go to Tools > Reports there is a report Unused Files. Files listed there will have to be deleted using Windows Explorer for the very good reason they do not appear in Project Manager and, therefore, cannot be deleted that way.
If you think about it, it is similar to Word. There is no option to delete a document there other than using File > Open and right clicking. Not very intuitive.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge -
Upon creating a new catalog, all files are renamed with a postfix: "-2"?
My catalog was corrupted, and i decided to create a new catalog from cratch.
To my big surprise alle falenames was renamed from IMG_xxxx.cr2 to IMG_xxxx-2.cr2. Why?
This is i problem sice i still god the old catalog, and try to recover some of the old editorial settings, but since alle files are renamed the are no longer visible in the old catalog. just about 15.000 files are renamed!Lightroom only adds suffixes when it finds files of the same name in a location it's moving or copying too.
What option did you use on Import? Copy/Add/Move? -
Modifying an existing finder script to apply to all files on the harddrive
Can anyone tell me specifically how to modify the finder script "Replace Text in Item Names" so that it will replace the given text in all files on the harddrive at once rather than only in the frontmost Finder window?
Thanks!Here's a change that's a little more general-purpose, and reasonably simple.
Where the original script reads:<pre>display dialog "Replace “" & the search_string & "” with “" & the replacement_string & "” in every item name?" buttons {"Cancel", "OK"} default button 2
set the item_list to list folder source_folder without invisibles
set source_folder to source_folder as string
repeat with i from 1 to number of items in the item_list
set this_item to item i of the item_list
set this_item to (source_folder & this_item) as alias
set this_info to info for this_item</pre>
change it to
<pre>tell application "Finder"
set folder_name to name of source_folder
tell me to display dialog "Replace “" & the search_string & "” with “" & the replacement_string & "” in every item name of folder “" & folder_name & "” and its subfolders?" buttons {"Cancel", "OK"} default button 2
with timeout of 0 seconds -- This command can take awhile to run, so wait for it.
set the item_list to entire contents of source_folder
end timeout
end tell
repeat with i from 1 to number of items in the item_list
set this_item to item i of the item_list
set this_info to info for this_item as alias</pre>
The most substantial change is using the Finder's entire contents command, which recursively lists subfolders, rather than list folder. Note that the script still acts upon the active folder in the Finder, so you'll want to open your home folder first. I also changed the confirmation dialog slightly so that it reminds you what folder it'll be acting on, and the fact that it'll be doing so recursively on the subfolders as well.
Titanium PowerBook Mac OS X (10.4.6) -
All files modified by File Sync Agent
I'm looking for explanation for an interesting event. It seems that tonight's scheduled Net Folder sync "modified" all files on our Filr system. Needless to say, the files have not actually all been modified, but everybody who was subscribed to a folder received e-mail notification about all files having been modifiled by File Sync Agent. Also when I view details of any file in Filr web interface, the file shows as being last modified by File Sync Agent tonight.
Can this be because DST ended yesterday and Filr thinks that timestamps of all files have been changed?no one bothered to respond.
Maybe you are looking for
-
*FIX?* Adobe Application Manager - Download Error (Creative Cloud)
So I just started the subscription for the Creative Cloud and I downloaded the Adobe Application Manager, which seemed to have installed fine, and when I go into my creative cloud and click download, under for example photoshop, I get Download Error
-
When I try to connect my Apple Magic Mouse to my Windows 8 pc it says enter the Pass code?
I have a Windows 8 pc and I want to connect my Magic Mouse to it. So I search for bluetooth devices and it picks up. I click connect then it asks for my pass code and I don't know what it's talking about. I got this mouse for my birthday and it's ref
-
Removing removal of standard image from Top Left from java applications
Hello All! i am working on java application. i have to remove image(standard java image in every frame , dialog box and JOption Pane etc....). I'll be very thankfull if anybody can help me. Looking forward for early response Asima
-
How to create UNIT info catalog
Anyone has the steps to create InfoObject catalog for info object type UNIT ?
-
Can't find eBay Mobile in App Store on iPod Touch! Is it for iPhone only ?
At iPod Touch 2.0, I tried to search for eBay in App Store. Turns out there only a Paypal. My friend's iPhone 3G's got eBay, wonder why isn't iPod Touch. Means a lot to me a eBay powerseller. Message was edited by: Kashahayh