Created and modified dates all the same
Clock is displaying the correct time but for all types of files the created and modified dates are all displaying the one date. Any suggestions?
Thanks for your input. I want to keep the files with a 1 or ~1 as it happens and delete the rest. I have written some scripts. I think I could write a script to delete all files with a 1, but of course that is not what I want. I guess
I need a script to delete all files except if they contain a 1. I haven't used a forum since way back in the PC mag days.
Whoops..........I just realized exactly what you were telling me and used your suggestion. I guess I was trying to do more work than I needed. I searched for all files with a 1 in the folder and then moved them to a different folder. Then
I deleted the rest. Job done. Thanks for the help.
Similar Messages
-
I've attached a VI that I am using to acquire amplitude from Spectrum analyzerse. I tried to connect amplitude ouput to the VI Write Characters To File.vi and Write to Spreadsheet File.vi. Unfortunately when I run continual this VI without interruption, labview ask me many time to enter a new file name to save a new value.
So, How can I do to aquire and save date in the same time and in the same file when I run continual my VI for example during 10 min.
Thank you in advance.
Regards,
Attachments:
HP8563E_Query_Amplitude.vi 37 KBHi,
Your VI does work perfectly. Unfortunately this not what I want to do. I've made error in my last comment. I am so sorry for this.
So I explain to you again what I want to do exactly. I want to acquire amplitude along road by my vehicle. I want to use wheel signal coming from vehicle to measure distance along road. Then I acquire 1 amplitude each 60 inches from spectrum analyzer.
I acquire from PC parallel port a coded wheel signal coming from vehicle (each period of the signal corresponds to 12 Inches). Figure attached shows the numeric signal coming from vehicle, and the corresponding values “120” and “88” that I can read from In Port vi.
So I want to acquire 1 time amplitude from spectrum analyser each 5
period of the signal that I am acquiring from parallel port.
So fist I have to find how can I count the number of period from reading the values “120” and “88” that I am acquiring from In Port (I don’t know the way to count a number of period from reading values “120” and “88”).
Here is a new algorithm.
1) i=0 (counter: number of period)
2) I read value from In Port
3) If I acquire a period
i= i+1 (another period)
4) If i is multiple of 5 (If I read 5 period)
acquire 1 time amplitude and write to the same
file this amplitude and the corresponding distance
Distance = 12*i). Remember each period of signal
Corresponds to 12 Inches).i has to take these
values: 5,10,15,20,25,35,40,45,50,55,60............
5) Back to 2 if not stop.
Thank you very much for helping me.
Regards,
Attachments:
Acquire_Amplitude_00.vi 59 KB
Figure_Algorithm.doc 26 KB -
why some iphone 4s has korean letters at the back and not the same with the most iphones..but the serial and software are all the same..so why there is phone with korean letters on the back it says.. kcc -cmm- apa -a1387..i purchased one and really worried about this..is this original or not..but all the software etc are all the same with other iphone..just that korean letter at the back
I bought it in some mall here in our place..im from philippines.. im worried about this coz its different with other iphone at the back.. it says designed by apple in california..then its all korean letters at the bottom it says KCC-CMM-APA-A1387..i checked both serial number from the phone in the box and in the sim card slot and its all match, i checked it also in apple service and support coverage and it says : valid purchase, your product is eligible...and it shows i have 90 days technical support,and my repair and service coverage is active....pls help what model of iphone is this its working and i can sync to itunes,icloud and etc..thats what it says on the back on the image ia
-
How to accessed,created and modified date of particular file in java
Hi,
I am facing one problem.
I know how to get the modified date/time of file in java.
but i don't know how to find created and accessed date/time of file in java.
Thanks,
TejasI guess thats not possible in in Windows.
But if u r trying it on a unix machine.
You can use Runtime class to call exec on the command
ls -l filename
and then store the result in a file . And then take out the last modified time. But you cant get created time.
Thats a clumpsy way i believe. -
All the dates are the same in my e-mail. The 'date sent' and 'date received' always read as '29 August 2010'. When mail arrives, it says 'today' then 'tomorrow' then becomes '29 August 2010'. This is despite the date and time setting being correct on the imac. Can anyone help, please?
Double-click on one of the transitions. You'll see a row of controls appear above the preview window, one of which controls the length of transitions. With the first transition still selected, go through the timeline and click each one while holding down the command key. After selecting them all, change the time in the control mentioned above and press enter.
I've not found a way to do the same with the actual photos. I think you'll have to do that individually for each picture, but grabbing the right edge and dragging out to the right to your desired length. -
when I updated my Apple tv it now shows about 10 computers on my network which I only have one tv...how do I get rid of the other "computers" listed as they are all the same, this was not happening before I updated the Apple TV
It looks to be a bug. A reboot to computer and/or Apple TV may resolve it.
You can provide feedback to Apple and file a report.
https://www.apple.com/feedback/
https://bugreport.apple.com/ -
I have a number questions that I want to know the average of all the before and after data to compare them, how do I set this up in a form in FormsCentral? Here is an example of what I want to do - the green bar is "before" and blue is "after"
This isn't something that you can set up in FormsCentral. It's possible to something similar with a form you create in Acrobat and use with FormsCentral, but there is no sort of built-in graphing control. The bar graph could be implemented with some JavaScript that controls annotations or fields (buttons) and perhaps some text fields.
-
Historical and transaction data in the same tables creates perf problems
Our Oracle based application is slow partly due to the fact that historical data are kept in the same table as transactional data. For example records about deceased patients, patients treated 5 years ago...etc, are kept in the one and only one patient table, which is needed to run the daily process of the hospital. So gradually all our major tables PATIENTS, CHARTS, NAMES, APPOINTMENTS have grown very large and since most of our SQL join all these tables at the same time, then all screens and reports run very slowly. I have introduced the idea that we should split all these tables in two: historical PATIENTS data, and CURRENT PATIENTS data...the same with all the others. A nice system would first search in the smaller transactional tables, which would run faster being smaller, and if no data found, then fallback to the historical tables. But this would require programming. From what I have read mateialized view could solve part of our problem. We could have views containing for example only one year worth of the data, and I guess any changes could be later replicated in the base table. What I dont know is what to do if we cannot find the patient in the matealized views ? Do I need to fallback to another SQL which will search in the initial base tables ? Anyway we can implement this without programming ? Tx.
Appointment table: 207,470
Visit table: 5,890,920
Patient table: 2,993,129
Chart table: 2,864,069
Patient names table: 3,938,118
SELECT
APPOI_OR_VISIT,
VISIT_SEQ,
PAT_SEQ,
INST_CODE,
INST_CODE_DISPL,
INST_DESC,
CLINIC_CODE,
CLINIC_CODE_DISPL,
CLINIC_DESC,
SPEC_CODE,
SPEC_CODE_DISPL,
SPEC_DESC,
VISIT_DATE,
VISIT_TIME,
VISIT_TIME_ARRIVAL,
APPTYPE_CODE,
SESSION_DOM_MODE,
PRESTYPE_CODE,
PRESTYPE_DOM_TYPE,
DIA_CODE,
VISIT_TIME_START_RESP,
VISIT_TIME_DISCHARGE,
APPOI_NB_DURATION,
VISIT_TX_REASON,
VISIT_TX_COMMENT,
EXTDOC_CODE,
VISIT_PN_REFPHYS_NAME,
PATYPE_CODE,
PAYRESP_CODE,
VISIT_IND_GROUP,
VISIT_PCODE,
VISIT_IND_COMPLETE,
VISIT_IND_ADMISSION,
VISIT_IND_CONFIDENTIALITY,
VISIT_DATE_ACCIDENT,
APPOI_SEQ,
BILLING_CODE,
VISIT_TX_DIAGNOSIS,
CST_CODE_1,
CST_CODE_2,
CST_CODE_3,
APPOI_DH_CRE,
APPOI_CODE_CRE_USER,
APPOI_DH_MOD,
APPOI_CODE_MOD_USER,
VISIT_CODE_CRE_USER,
VISIT_DH_CRE,
VISIT_UPDATED_COUNT,
VISIT_CODE_MOD_USER,
VISIT_DH_MOD,
APPOI_PAYRESP_CODE,
APPOI_DT_ACCIDENT,
PATIENT_LAST_NAME,
PATIENT_FIRST_NAME,
PATIENT_CONFIDENTIALITY,
PATIENT_CHART_EXT,
TO_NUMBER(SUBSTR(PATIENT_CHART_EXT, 1, INSTR(PATIENT_CHART_EXT, '|')-1)) AS PATIENT_CHART_NO,
PAT_IND_SPECIAL_RISK
FROM
SELECT
'VISIT' AS APPOI_OR_VISIT,
VISIT.VISIT_SEQ,
VISIT.PAT_SEQ,
INSTITUTION.INST_CODE,
INSTITUTION.INST_CODE_DISPL,
INSTITUTION.INST_DESC,
CLINIC.CLINIC_CODE,
CLINIC.CLINIC_CODE_DISPL,
CLINIC.CLINIC_DESC,
SPECIALTY.SPEC_CODE,
SPECIALTY.SPEC_CODE_DISPL,
SPECIALTY.SPEC_DESC,
VISIT.VISIT_DATE,
VISIT.VISIT_TIME,
VISIT.VISIT_TIME_ARRIVAL,
VISIT.APPTYPE_CODE,
VISIT.SESSION_DOM_MODE,
VISIT.PRESTYPE_CODE,
VISIT.PRESTYPE_DOM_TYPE,
VISIT.DIA_CODE,
VISIT.VISIT_TIME_START_RESP,
VISIT.VISIT_TIME_DISCHARGE,
VISIT.APPOI_NB_DURATION,
VISIT.VISIT_TX_REASON,
VISIT.VISIT_TX_COMMENT,
VISIT.EXTDOC_CODE,
VISIT.VISIT_PN_REFPHYS_NAME,
VISIT.PATYPE_CODE,
VISIT.PAYRESP_CODE,
VISIT.VISIT_IND_GROUP,
VISIT.VISIT_PCODE,
VISIT.VISIT_IND_COMPLETE,
VISIT.VISIT_IND_ADMISSION,
VISIT.VISIT_IND_CONFIDENTIALITY,
VISIT.VISIT_DATE_ACCIDENT,
VISIT.APPOI_SEQ,
VISIT.BILLING_CODE,
VISIT.VISIT_TX_DIAGNOSIS,
VISIT.CST_CODE_1,
VISIT.CST_CODE_2,
VISIT.CST_CODE_3,
VISIT.APPOI_DH_CRE,
VISIT.APPOI_CODE_CRE_USER,
VISIT.APPOI_DH_MOD,
VISIT.APPOI_CODE_MOD_USER,
VISIT.VISIT_CODE_CRE_USER,
VISIT.VISIT_DH_CRE,
VISIT.VISIT_UPDATED_COUNT,
VISIT.VISIT_CODE_MOD_USER,
VISIT.VISIT_DH_MOD,
NULL AS APPOI_PAYRESP_CODE,
TO_DATE(NULL) AS APPOI_DT_ACCIDENT,
NAME.NAM_PN_NAM AS PATIENT_LAST_NAME,
NAME.NAM_PN_FNAM AS PATIENT_FIRST_NAME,
CONFIDENTIALITY.CONF_DESC AS PATIENT_CONFIDENTIALITY,
PI_SECURITY.F_GET_CHART_NUMBER_SCAN_CODE(VISIT.PAT_SEQ, 103 /*:pChartInstitutionID*/, 0) AS PATIENT_CHART_EXT,
PATIENT.PAT_IND_SPECIAL_RISK
FROM
AS_T_VISITS VISIT,
CT_R_INSTITUTIONS INSTITUTION,
AS_T_CLINICS CLINIC,
CT_R_SPECIALITIES SPECIALTY,
PI_T_NAMES NAME,
PI_T_PATIENTS PATIENT,
PI_R_CONF_LEVELS CONFIDENTIALITY
WHERE
VISIT_DATE >= TO_DATE('2004-04-01', 'YYYY-MM-DD') /*:P_VISIT_DATE_FROM*/ AND
VISIT_DATE <= TO_DATE('2004-04-02', 'YYYY-MM-DD') /*::P_VISIT_DATE_TO*/ AND
CLINIC.CLINIC_CODE = VISIT.CLINIC_CODE AND
SPECIALTY.SPEC_CODE = CLINIC.SPEC_CODE AND
INSTITUTION.INST_CODE(+) = VISIT.INST_CODE AND
NAME.PAT_SEQ = VISIT.PAT_SEQ AND
NAME.NAMTYP_CODE = 1 AND
PATIENT.PAT_SEQ = VISIT.PAT_SEQ AND
CONFIDENTIALITY.CONF_CODE (+) = PATIENT.CONF_CODE
UNION
SELECT
'APPOI' AS APPOI_OR_VISIT,
0 AS VISIT_SEQ,
NVL(APPOINTMENT_GROUP.PAT_SEQ, APPOINTMENT.PAT_SEQ) AS PAT_SEQ,
INSTITUTION.INST_CODE,
INSTITUTION.INST_CODE_DISPL,
INSTITUTION.INST_DESC,
CLINIC.CLINIC_CODE,
CLINIC.CLINIC_CODE_DISPL,
CLINIC.CLINIC_DESC,
SPECIALTY.SPEC_CODE,
SPECIALTY.SPEC_CODE_DISPL,
SPECIALTY.SPEC_DESC,
APPOINTMENT.SESSION_DATE AS VISIT_DATE,
APPOINTMENT.APPOI_TIME AS VISIT_TIME,
'' AS VISIT_TIME_ARRIVAL,
APPOINTMENT.APPTYPE_CODE,
APPOINTMENT.SESSION_DOM_MODE,
0 AS PRESTYPE_CODE,
'' AS PRESTYPE_DOM_TYPE,
0 AS DIA_CODE,
'' AS VISIT_TIME_START_RESP,
'' AS VISIT_TIME_DISCHARGE,
APPOINTMENT.APPOI_NB_DURATION,
APPOINTMENT.APPOI_TX_REASON AS VISIT_TX_REASON,
APPOINTMENT.APPOI_TX_COMMENT AS VISIT_TX_COMMENT,
APPOINTMENT.EXTDOC_CODE,
APPOINTMENT.APPOI_PN_REFPHYS_NAME AS VISIT_PN_REFPHYS_NAME,
APPOINTMENT_TYPE.PATYPE_CODE AS PATYPE_CODE,
0 AS PAYRESP_CODE,
DECODE(APPOINTMENT_GROUP.PAT_SEQ,NULL,0,1) AS VISIT_IND_GROUP,
'' AS VISIT_PCODE,
0 AS VISIT_IND_COMPLETE,
0 AS VISIT_IND_ADMISSION,
APPOINTMENT.APPOI_IND_CONFIDENTIALITY AS VISIT_IND_CONFIDENTIALITY,
TO_DATE(NULL) AS VISIT_DATE_ACCIDENT,
APPOINTMENT.APPOI_SEQ,
0 AS BILLING_CODE,
'' AS VISIT_TX_DIAGNOSIS,
0 AS CST_CODE_1,
0 AS CST_CODE_2,
0 AS CST_CODE_3,
APPOINTMENT.APPOI_DH_CRE AS APPOI_DH_CRE,
APPOINTMENT.APPOI_CODE_CRE_USER AS APPOI_CODE_CRE_USER,
APPOINTMENT.APPOI_DH_MOD AS APPOI_DH_MOD,
APPOINTMENT.APPOI_CODE_MOD_USER AS APPOI_CODE_MOD_USER,
'' AS VISIT_CODE_CRE_USER,
SYSDATE AS VISIT_DH_CRE,
0 AS VISIT_UPDATED_COUNT,
'' AS VISIT_CODE_MOD_USER,
SYSDATE AS VISIT_DH_MOD,
PAYRESP_CODE AS APPOI_PAYRESP_CODE,
APPOI_DT_ACCIDENT,
NAME.NAM_PN_NAM AS PATIENT_LAST_NAME,
NAME.NAM_PN_FNAM AS PATIENT_FIRST_NAME,
CONFIDENTIALITY.CONF_DESC AS PATIENT_CONFIDENTIALITY,
PI_SECURITY.F_GET_CHART_NUMBER_SCAN_CODE(APPOINTMENT.PAT_SEQ, 103 /*:pChartInstitutionID*/, 0) AS PATIENT_CHART_EXT,
PATIENT.PAT_IND_SPECIAL_RISK
FROM
AS_T_APPOINTMENTS APPOINTMENT,
AS_R_APPOINTMENT_TYPES APPOINTMENT_TYPE,
AS_T_CLINICS CLINIC,
CT_R_SPECIALITIES SPECIALTY,
CT_R_INSTITUTIONS INSTITUTION,
AS_T_APPOINTMENT_GROUPS APPOINTMENT_GROUP,
PI_T_PATIENTS PATIENT,
PI_R_CONF_LEVELS CONFIDENTIALITY,
PI_T_NAMES NAME,
AS_T_APPOINTMENT_SEQ_MAPPING SEQMAP
WHERE
SESSION_DATE >= TO_DATE('2004-04-01', 'YYYY-MM-DD') /*:P_VISIT_DATE_FROM*/ AND
SESSION_DATE <= TO_DATE('2004-04-02', 'YYYY-MM-DD') /*::P_VISIT_DATE_TO*/ AND
APPOINTMENT.APPOI_DOM_TYPE IN('A','AR') AND
CLINIC.CLINIC_CODE = APPOINTMENT.CLINIC_CODE AND
SPECIALTY.SPEC_CODE = CLINIC.SPEC_CODE AND
INSTITUTION.INST_CODE(+) = APPOINTMENT.INST_CODE AND
APPOINTMENT_GROUP.APPOI_SEQ (+) = APPOINTMENT.APPOI_SEQ AND
APPOINTMENT_TYPE.APPTYPE_CODE (+) = APPOINTMENT.APPTYPE_CODE AND
NAME.PAT_SEQ = NVL(APPOINTMENT.PAT_SEQ, APPOINTMENT_GROUP.PAT_SEQ) AND
NAME.NAMTYP_CODE = 1 AND
PATIENT.PAT_SEQ = NVL(APPOINTMENT.PAT_SEQ, APPOINTMENT_GROUP.PAT_SEQ) AND
CONFIDENTIALITY.CONF_CODE (+) = PATIENT.CONF_CODE AND
SEQMAP.APPOI_SEQ (+) = APPOINTMENT.APPOI_SEQ AND
SEQMAP.APPOI_SEQ IS NULL
ORDER BY
VISIT_DATE, VISIT_TIME, PATIENT_CHART_NO -
Files transferred via Bonjour have 'Created' and 'Modified' dates changed
Okay, So I drag a file or folder of files to a name in the bonjour window to initiate a file transfer session between me and a co-worker. The transfer goes just fine; however, the "created", "modified", and "last opened" dates have all changed to the time when the file was transferred.
I have never noticed this before. Or, perhaps I just never had reason to view the time stamps.
I have tried transferring files to/from several different workstations running various system configurations. The results all seem the same. ALL the dates in the Get Info window are CHANGED!
What the heck?? Anyone?If it is a transferred file that is new to that computer then it is likely the modified date will be changed.
I am not sure about the Created date in these circumstances
10:15 PM Friday; October 12, 2007 -
HCM Process and Forms - Create and End record using the same form scenario
Hi All,
I have the following requirement while using HCM Processes and Forms: Using one form/scenario I need to both create a record or be able to end a record for infotype 841. When looking at the back-end service SAP_PA I have operations Create, Change, Change without delimiting and Delete. My requirement would be to do both a create and a delete I guess, but these two can't be selected at the same time while configuring the form scenario.
I was thinking about doing somethign with the startdate and enddate instead of using the effective date. But I have no clue how to do that.
How would this be possible?
Thanks,
JYou are correct in assuming that you cannot have a create and delete on the same infotype. The config will not allow it. Instead, configure the create and then do the delete via a call to you own method in the workflow or via the advanced generic service
Cheers
Ian -
How can I save images and text data to the same file?
I have been looking at ways to do this for a while. My main VI saves the raw data to a text file which the users then import to Excel and plot. I am trying to simplify this process and have been looking at ways to accomplish this task. I want to be able to save the raw data to a file and then save the Labview graph as well. This will eliminate the tedious task of importing the raw data into Excel and plotting it. I can save the raw data to its own file and I can use the Get Image method for the graph and save it to its own file. I am currently using the .png format. Is there a way of saving both to the same file ie, importing the image into Excel or Word etc. Before I go off doing a science project I wanted to see if anyone else had experience completing this task and had any recommendations. Thanks in advance for any help.
well ther are a couple of ways. You could use the standard report generation VI's and make a complete report with the image of the graph embedded into the report with the raw data or you could use activeX and control excel thru LV and put the raw data into excel directly and have excel graph the data without any user interaction. I have posted a slew of VI's on the excel board if you do not have the report generation toolkit. If you could tell me which way you want to go I could possibly send you an example.
For more information and some sample VI's and tool kits, you can go to the excel board
Joe.
"NOTHING IS EVER EASY" -
Lost my audionote apps and its data, all the photos after upgrade to latest ipad software
Hi all,
Today I upgraded my ipad software from 4.3.5 to 5.0.1 via the itunes my macbook pro. During the upgrade the system automatically backed up my ipad. However, after the upgrade, I have found out that all the data for my apps such as audionote lite, as well as photos under the Photos folder are gone, even if I have tried to restore them from the backup on my mac.
I called the apps tech support tonight. The guy over there said only photos, calendars are backed up and restored after the upgrade.
Do you know if there is a way to restore my audionote files, which are one of the most important files for my life.
Thanks a lot,
saduser1Hy,
I did it.
All data from other apps where restore perfectly.
Only Audionote are missing.
In the icloud backup I see there is 1.2 gb. of data in the audionote app. but...................
How can I get them?
Thanks.
Andrea -
and btw, I'm using iTunes in Windows7. I've removed all the songs in my iTouch and tried it, the same thing kept happening..
I have the same problem - have you checked Genre,Year and Contributing Artists? Have you downloaded the tracks from multiple sources?
-
HT204053 how do i use two iphones with two seperate apple id's and not share all the same icloud
we have two iphone 4's and dont want to share our apps. how do we set up icloud and itunes on the same pc and use two different phones
You need to set up two user accounts on the mac. System Preferences>Users & Groups. Then each user can set up apple IDs for itunes and icloud any way they want.
-
Need urgent on installation of Spatial and R12 data in the same server
Hi
This is Hanumantha. I am getting problem with Geo Spatial data type objects manuplating from Apps.
Geo spatial data is installed in Navteq database in one server. R12 application is installed in another server. Through data base link in APPS, I am able to access Navteq tables data, procedures etc. But I can't manuplate the objects data like Varrays and object types from apps throgh db link from navteq.
Instead created the procedure which will decompose the object type to "primitive types" (number, date, varchar2,.) which is accessing from apps. But hz_locations , Geometry column will have data type SDO_GEOMETRY and I cant update with primitive data type (number, date, varchar2..).
Kindly please help us reconstucting to the SDO_GEOMETRY object using primitive data types.
OR
Is there any possiblity of installing Navteq database(GeoSpatial data) and R12 applications data together in the one server.
Could please any help on the above as soon as possible?
Thanks in Advance.
Thanks,
HanumanthaCould you give me an example of this update rutine?
Maybe you are looking for
-
Exporting a 2D table from Report to Excel
I have created an automatic populating 2D table in the Report window. I would like to copy the contents of the table into excel format. When I try to copy/paste into excel, I just get a bunch of code. Is there a way to copy the contents of the 2D
-
My iPhone doesn't appear in iTunes after setting up iCloud syncing
I have an iPhone4 and have updated to ios 5 and have a macbook pro running Lion and have updated that and iTunes. Everything was goig OK but after setting up iCloud syncing I find if I want to sync by usb my iPhone doesn't appear in the devices. Mayb
-
If i upgrade to iphone5 everything will stay on my 4s right?
Im trying to upgrade my iphone 4s to an iphone 5 but i want to make sure that any and all data that is already on my iphone 4s will stay there...is that plausible?
-
Problem with downloading maps (europe maps)
i can't download from nokiasuite any map of europe, starts with downloading basical europe map, after few minutes it says that there is a problem with internet, check connection. There is no problem with downloading other maps, apps, video, and other
-
Please help! All other colors work when I'm using them but nothing happens when I switch to black.