All my song in my playlists are cutting off either in middle or at the end of each song. How do i fix this?

all my song in my playlists are cutting off either in middle or at the end of each song. How do i fix this?

First, try a system reset.  It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here.

Similar Messages

  • When I export my song from Garageband off of my iPad to iTunes the sound quality is wrong, how do i fix this!?

    Hey, I've read plenty of posts on how to fix this, but it's all for the Mac, and what they say is too turn off the auto-normalize, but there is no option for it on the ipad and I don't have a Mac...
    I have exported it on all sound qualities, I have adjusted the low and high notes so they arent all that over powering, but it all keeps sounding the same
    I would really love if I could have some help on this as I've spent months working on this piece of music and I really would love to have it on my mp3...
    So some help would be greatly appreciated

    I've just found out, that it sounds fine on my iphone when played through headphones, speakers or even stereo, its just when i play it on itunes, it sounds funny like when it hits lows it goes quiet as if it cant handle them...

  • A lot of songs on my Iphone are cutting off several minutes short, and some are just skipping to the next song in the middle of the current song. Any ideas or suggestions would be appreciated.

    A lot of songs on my Iphone are cutting off several minutes short, and some are just skipping to the next song in the middle of the current song. Any ideas or suggestions would be appreciated.

    Go to http://www.apple.com/support/itunes/contact/ and then click contact iTunes Store Support. Then find your issue in the categories and then it will most likely take you to a page with suggested things to do but also on this page should be an option to e-mail them. Just explain your problem and also have the names of the songs that you are having problems with listed in the e-mail so they can help you more quickly. They usually get back to you within 24 hours.

  • Since installing latest iTunes my playlists stop at the end of each song -why?

    since installing latest iTunes my playlists stop at the end of each song -why?

    Richard Emerson1 wrote:
    since installing latest iTunes my playlists stop at the end of each song -why?
    Most likely your songs got unchecked.  iTunes will not automatically advance to an unchecked song.
    First make sure you can see the checkboxes.  If not, Preferences > General, Show list checkboxes.
    If they have gone empty, you can recheck them all at once by holding the CMD or OPTION key (sorry I forget which on a Mac, so if one does not work try the other) and click any empty box.

  • My laptop thinks there are headphones in at all times, such that the speakers won't work, how do I fix this?

    My laptop thinks there are headphones in at all times, such that the speakers won't work, how do I fix this?

    Thanks but that did not work. Details: when I don't have headphones plugged in, the volume won't go up or down and it also displays a circle with a line through it meaning it's not working. When I go to settings and look at my audio output, it only says headphones, even if no headphones are plugged in. I have tried inserting and removing headphones many times, also tried poking the inside of the headphone jack with a stripped Q-tip, and nothing works. Something inside the jack that senses headphones is not sensing the lack of headphones.

  • When starting Final Cut Pro 7.0.3 I am all of a sudden getting a message that says "One or more of the scratch disks don't have read/ write access" and now the app won't operate - how do I fix this so I can use Final Cut Pro?

    When starting Final Cut Pro 7.0.3 I am all of a sudden getting a message that says "One or more of the scratch disks don't have read/ write access" and now the app won't operate - how do I fix this so I can use Final Cut Pro?

    Glad you found the answer.  But something seems wrong.  FCP should be able to assign the scratch disk to your startup drive.  It's not advisable, but it should be possible.  You might want to try and figure out what's going on before what ever's going on cause other problems.

  • When I'm previewing my iDVD, the pictures are all of the edited ones - which is what I want - but after I burn the DVD, all the pictures are in the unedited form!! What the heck?!! How do I fix this problem? I've never experienced this before!!

    When I'm previewing my iDVD, the pictures are all of the edited ones - which is what I want - but after I burn the DVD, all the pictures are in the unedited form!! What the heck?!! How do I fix this problem? I've never experienced this before!!

    Hi
    Try in iDVD
    • Save as a DiskImage
    • Play this by use of DVD-player tool
    Still OK or problems ?
    If OK - Burn it by use of
    • Apple Disk Util tool - or -
    • Roxio Toast™ (if You got this - I love it)
    Yours Bengt W

  • Strange digital artifacts at the end of each song importing via iTunes

    I've tried a few variations on archive searches and wasn't able to find an answer to this: In ripping some of my CD's into iTunes (either Apple Lossless or WAV) I've been getting some very odd, brief digital artifacts at the end of each songs on a CD. This sounds like two or three seconds of an audio tape on fast forward. It only seems to happen on new releases (I cannot think of any older CD's it's occurred on). I just got a copy of Mary Gauthier's new album (great CD by the way) and it happened on that one, for example. I tried ripping it multiple times in Apple Lossless, and WAV (always in iTunes) and each and every time it created files where this strange artifact existed at the end of every song. I play the CD I ripped the files from and the artifact is not there. I have several CD's, most of them recent releases over the past five years, that do the exact same thing. Otherwise everything else functions perfectly an the bulk of my 700+ CD library has imported without a hiccup. Is this some kind of anti-piracy technology...or do I simply have some setting off in my itunes preferences (Error-Correction is on, WAV or Apple Lossless is always set to Automatic, have experimented with importing to startup disk and external disk-same results). The artifacts seem to always sound the same too...they never vary, except that they sound different from song-to-song, but the same if say, the first cut is played over again. They are always 2 seconds plus or minus, and always at the end of a cut (the final 2 seconds or so). They do transfer verbatim to my iPod, and also play via iTunes through my stereo.
    Anyone have any clues what this might be?

    As a follow up, I went to the Genius Bar for a bowl of Mensa Stew, but only got some tepid broth. Here's what transpired:
    The girl I was speaking with suggested that the artifact was the software misinterpreting information between the cuts. It was only a theory. She had not heard of any other incidents to relay. First she suggested I rip as MP3's. I explained that wasn't an option for me. She listened to a few cuts on a CD I'd brought with, or rather the ends of the cuts and confirmed there was a problem with the rip. She went through my settings, and asked if I'd tried it with Error Correction turned off. I explained I hadn't and that I preferred to use it. She suggested attempting to rip one of the cuts with it turned off just to see how it did. We did that and no artifact was there. So her 'solution' was to either leave error-correction turned off always, or turn it off for those problem CD's that produce the artifact (I'd estimate about 5% do on my laptop). This did not explain why it was doing it, nor why my g5 tower, which is running a carbon-copied system with all the same iTunes settings, does not produce the artifact with Error-Correction turned on.
    I'd be interested to hear of anyone else who's been having problems importing hi-rez files in iTunes. I know of at least one other instance where the artifact produced (on a MacBook) is dis-similar to mine in that it takes the form of brief electronic beeps moving from channel to channel.
    Anyone else?

  • TS3999 In MONTH, (PC) iCal only clearly lists 2 items a day. The 3rd item is "faded" and bottom portion cut off, w/ a "more" triangle in the lower-right corner. How can I expand (vertically) so the 3rd line posts clearly, and ONLY shows "more" if 4+ event

    In MONTH, (PC) iCal only clearly lists 2 items a day. The 3rd item is "faded" and bottom portion cut off, w/ a "more" triangle in the lower-right corner. How can I expand (vertically) so the 3rd line posts clearly, and ONLY shows "more" if 4+ events?
    Better yet... as there's a lot of "wasted" space w/ too large Month title and empty space surrounding the Month title above and too much space surrounding the month/year slider bar below, how can I minimize these to allow me more usable / valuable calendar "contents" so I don't need to waste so much time clicking "more" just to see the bottom of the truncated third event and find out there are no 4+ events posted that date?  i.e. more "user-friendly" presentation?
    Thx!
    [email protected]

    In MONTH, (PC) iCal only clearly lists 2 items a day. The 3rd item is "faded" and bottom portion cut off, w/ a "more" triangle in the lower-right corner. How can I expand (vertically) so the 3rd line posts clearly, and ONLY shows "more" if 4+ events?
    Better yet... as there's a lot of "wasted" space w/ too large Month title and empty space surrounding the Month title above and too much space surrounding the month/year slider bar below, how can I minimize these to allow me more usable / valuable calendar "contents" so I don't need to waste so much time clicking "more" just to see the bottom of the truncated third event and find out there are no 4+ events posted that date?  i.e. more "user-friendly" presentation?
    Thx!
    [email protected]

  • I have recently updated my CC programs to the latest version and now all of my files wont open by default into their respective programs, only if I open the program and go to file open and open the file from there. How can I fix this?

    I have recently updated my CC programs to the latest version (CC2014) and now all of my files wont open by default into their respective programs, only if I open the program and go to file>open and open the file from there. How can I fix this?
    I have tried 'Open with' and the version of the program now installed on my computer isn't even suggested as an option and when I browse for it, the file wont open with it anyway

    On Windows (don't know about Mac), the latest version will always take over the file association, and become the default for indd files. It's impossible to change it.
    But there is a plugin for ID that makes this possible. Never tried it myself.
    https://www.rorohiko.com/wordpress/downloads/lightning-brain-soxy/

  • HT3529 while using iMessage i can not see the message i send all i get is a bubble that shows nothing but the receiver can see it how do i fix this

    when i use imessage it just shows me as a blank bubble but the reciever can see it. how do i fix this?

    Hi there jordzee,
    You may want to try force closing all open apps and resetting the device as an initial troubleshooting step. Take a look at the articles below for more information.
    iOS: Force an app to close
    http://support.apple.com/kb/ht5137
    iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/ht1430
    -Griff W.

  • Ok, my former computer crashed and i have a new one. i would like to sync my ipod with the new one, but it wont allow me to with out removing all of the data on it. How can i fix this?

    ok, my former computer crashed and i have a new one. i would like to sync my ipod with the new one, but it wont allow me to with out removing all of the data on it. How can i fix this?

    See Recover your iTunes library from your iPod or iOS device.
    tt2

  • I attempted to download a song. It originally did not download correctly. I refreshed the download and it supposedly completed. Upon playing the song in both my library and on the Itunes store it will not play past the first 5 seconds. How can I fix this?

    It originally did not download correctly. I refreshed the download and it supposedly completed. Upon playing the song in both my library and on the Itunes store it will not play past the first 5 seconds. How can I fix this?

    Hello Whitney262,
    Thanks for using Apple Support Communities.
    I would go ahead and make sure you can first download the content, then remove the song from your iTunes Library, and download again from your iTunes past purchases.  The article below will walk you through the entire process:
    Download past purchases
    http://support.apple.com/kb/ht2519
    Take care,
    Alex H.

  • Does anyone know why my iphone keeps switching all of my alert tones and ringtones assigned to contacts? i restored it and it still keeps doing it and now when ever i get a txt or a phone call the tones just sound terrible. how do i fix this?

    does anyone know why my iphone keeps switching all of my alert tones and ringtones assigned to contacts? i restored it and it still keeps doing it and now when ever i get a txt or a phone call the tones just sound terrible. how do i fix this?

    Your only chance is setting it up as new device without using the latest backup afterwards, which you already did.
    If this does not work, you should get it serviced:
    Apple - Support - Service Answer Center
    How to back up your data and set up as a new device

  • I recently had to disable and enable all add-ons on Firefox. Now when I google something, when I hover over the website preview and click 'cached' it won't highlight the key terms anymore. How can I fix this?

    I recently had to disable and enable all add-ons on Firefox. Now when I google something, when I hover over the website preview and click 'cached' it won't highlight the key terms anymore. How can I fix this?

    Clear the cache and the cookies from sites that cause problems.
    "Clear the Cache":
    *Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Tools > Options > Privacy > Cookies: "Show Cookies"
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Maybe you are looking for

  • What's happend to PyWm?

    Being a python fan, I noticed this http://pywm.sourceforge.net/ , a window manager written entirely in python, yet, it isn't being actively developed. Have anyone of you tried PyWm?  If so, what was it like? Why did the developer stop adding code to

  • LG L246WH 24" LCD won't allow selection of native resolution

    I have a 20" Cinema Display (connected via a MiniDisplayPort to DVI Adatper) and an LG L246WH connected to the GT120 in my new Mac Pro - System profiler sees it as: NVIDIA GeForce GT 120: Chipset Model: NVIDIA GeForce GT 120 Type: Display Bus: PCIe S

  • Third Party Flash player???

    I have a G5 PPC running 10.5.8 and would like to know if there are ANY third party Flash Players since Adobe no longer supports PPC?

  • Zen Micro: Can See Files in Mead Cen

    Yes, i cant see the Files in the media center anymore...he doesnt show me anything but he says, that the Zen Micro is connected...there's no error message or something. i also cant import new files...he says, that the player is busy or something...ma

  • Change the owner of the job

    Hi Gurus, Can anybody please tell me how we can change the user name of the job. I had created a job in sm36, but everytime it runs, it shows my user name which we want to avoid, therefore can anybody suggest how we can change the job user name to BA