All SQL statements in a session

Hi OTN,
It's possible to get all SQL statements executed in a session?
In V$SESSION and V$ACTIVE_SESSION_HISTORY are only the current and pre current statements.
-JSG

Hi, you can enable the sql trace to a especific session with dbms_trace and get all sql statements, if you need more information review the Note:104239.1 into Metalink site.
Luck.
Have a good day.
Regards.

Similar Messages

Capture all SQL statements and archive to file in real time

Want to Capture all SQL statements and archive to file in real time?
Oracle Session Manager is the tool just you need.
Get it at http://www.wangz.net
This tools monitor how connected sessions use database instance resources in real time. You can obtain an overview of session activity sorted by a statistic of your choosing. For any given session, you can then drill down for more detail. You can further customize the information you display by specifying manual or automatic data refresh, the rate of automatic refresh.
In addition to these useful monitoring capabilities, OSM allows you to send LAN pop-up message to users of Oracle sessions.
Features:
--Capture all SQL statement text and archive to files in real time
--Pinpoints problematic database sessions and displays detailed performance and resource consumption data.
--Dynamically list sessions holding locks and other sessions who are waiting for.
--Support to kill several selected sessions
--Send LAN pop-up message to users of Oracle sessions
--Gives hit/miss ratio for library cache,dictionary cache and buffer cache periodically,helps to tune memory
--Export necessary data into file
--Modify the dynamic system parameters on the fly
--Syntax highlight for SQL statements
--An overview of your current connected instance informaiton,such as Version, SGA,License,etc
--Find out object according to File Id and Block Id
Gudu Software
http://www.wangz.net

AnkitV wrote:
Hi All
I have 3 statements and I am writing some thing to a file using UTL_FILE.PUT_LINE after each statement is over. Each statement takes mentioned time to complete.
I am opening file in append mode.
statement1 (takes 2 mins)
UTL_FILE.PUT_LINE
statement2 (takes 5 mins)
UTL_FILE.PUT_LINE
statement3 (takes 10 mins)
UTL_FILE.PUT_LINE
I noticed that I am able to see contents written by UTL_FILE.PUT_LINE only after statement3 is over, not IMMEDIATELY after statement1 and statement2 are done ?
Can anybody tell me if this is correct behavior or am I missing something here ?Calling procedure must terminate before data is actually written to the file.
It is expected & correct behavior.

See all SQL statements that have been executed in an active transaction?

When I query v$transaction, v$session and v$sql, all I can see is the SQL statement that is currently running in an active transaction.
How can I view all SQL statements that have been executed in a currently running transaction since that transaction began?

Dana N wrote:
When I query v$transaction, v$session and v$sql, all I can see is the SQL statement that is currently running in an active transaction.
How can I view all SQL statements that have been executed in a currently running transaction since that transaction began?In the general case: impossible.
In some special cases you can use v$sql, v$open_cursor, or "Availabilty>View and Manage Transactions" or something else.
But be aware, transaction could be started long time ago, all cursor could be flushed from shared pool and closed, and redo (the page from Grid Control bring Log Miner) may not always be available.

Capture all sql statements within an hour period

Hi there,
Is it possible to capture all the all sql statement? When I query the v$sql view I still missed few statements. Basically I want to statements from our in house applications.
Thanks

Thanks for the reply.
It really doesn't help. I have a datatbase with three schemas and the number on connections in the v$session are 55. The SID and SERIAL# constantly changed.
I've tried the sql_trace_in_session but the sid the changed every time I query. Also I tried set sql_trace to "true" but I have open the trace files to determine the schema.
Is there a way capture a specific schema only?
Thanks

Trace all sql statements

Hi,
Is it possible to trace all the SQL's into one trace file or any other alternative to capture all the SQL statements.

1. Export will take some time or a long time to run.
You will have to either
a. Use CONSISTENT=Y (and hope that you are able to get a consistent export)
b. Stop Transactions for the duration.
In option a. if you do allow transactions those transactions will appear neither in the Export NOR in the "trace file" that you will be generating later !! You WILL lose transactions.
2. There's no way to get a "trace file" to capture all SQL statements and bind values across multiple database sessions such that they are properly synchronised in time.
a. You can't get a trace file that you can simply run to reapply transactions.
b. You can't sequence transactions from multiple sessions running concurrently.
3. How fast do you REALLY think you will be able to apply that "trace file" (which, in any case, you CANNOT generate) ? It will take noticeable to considerable time.
4. How do you propose to transfer the Export dump to the remote location ? When you have no network connectivity ? Via tapes, transfered by courier ? Then why can't you transfer a Database Hot Backup and ArchiveLogs via tapes, transferred by courier ?
Hemant K Chitale
http://hemantoracledba.blogspot.com

How to get the process id of a sql statement or a session ....

How to get the process id of a sql statement or a session . ..?
Thanks

What about this?
SELECT pid
FROM v$session s, v$process p
WHERE p.addr = s.paddr
AND s.sid = :sid; -- replace :sid with your session idRegards.
Al

How to see all sql statements on sql commands under history link

Hi All,
How to see the all the sql history on sql commands tab.
I want see all sql statements.
Where to set if we need to store more sql statments in history.
We are using Apex3.2 and 10g database(EE).
Thanks,
Nr

I just checked the source code of the SQL commands history region and that report fetches a maximum of 1000 records. I don't know if you change the setting somewhere in the builder, but seeing the code it looks as though 1000 is hard-coded in the report definition(apex 4.0).
If you need to see all the command history,you can query the original table: APEX_040000.WWV_FLOW_SW_SQL_CMDS
Note that is an internal table used by apex and hence you might not find any documentation about it(google got me one valid hit: Identifying Inactive Workspaces which seem to confirm the table's use).
Anyway, here's what you need to do, ask your dba to grant your workspace user select access on this table
Connect as dba user and run
GRANT SELECT ON APEX_040000.wwv_flow_sw_sql_cmds to '<WORKSPACE SCHEMA>'Now you can run the following command from your workspace to see the entire command history using
select * from APEX_040000.WWV_FLOW_SW_SQL_CMDS where parsed_schema = '<WORKSPACE SCHEMA>';You might want to revoke the grant once you have seen the data/taken out an export due to security issues.

How to see all sql statements passed to the db?

Is it possible to configure Jdevloper (11.1.1.4) in way so that it shows all sql statements in the console?
thx in advance

Hi,
under your ViewController-Project Properties you'll find the Run Configurations. Under Java Options enter the following statement:
-Djbo.debugoutput=console
Marc

Query to return all SQL statements ran for a particular user.

Good Morning,
Is it possible to find all the SQL statements run for a particular user using the v$ views? I can do it it 10g however I am currently using 9i and the query below does not work.
select a.username,a.logon_time,b.sql_fulltext
from v$session a,v$sqlarea b
where a.sql_id=b.sql_id
and a.username='USER'
order by a.logon_time descI assume some columns in these views do not exist in 9i. The release of 9 I am using is 9.2.0.1.0.
You help is much appreciated.
Thanks,
Mark.

Dear Mark!
I suggest you to use auditing instead of v$sqlarea. Oracle Onlinedocumentation says the following about v$sqlarea:
>
V$SQLAREA lists statistics on shared SQL area and contains one row per SQL string. It provides statistics on SQL statements that are in memory, parsed, and ready for execution.
>
That means that you'll get only those SQL-Statements that are currently in memory. Older statements which are already deleted from memory are not visible for your query.
By the way if you simply want to know what is wrong with your query then please post your errormessage.
Yours sincerely
Florian W.
Edited by: Florian W. on 29.07.2009 12:03

Capture all sql statements of a logical transaction

Hi!
How can i capture all sql statemnts of a
logical trasaction(ALL sql stamtements before a commit) . Could somebody please
reply...
Thanks
null

Turn on tracing in that session (look in DBMS_SESSION)

Strange SQL statement in my PL/SQL session

Hi all,
i found a very strange SQL statement in my session.
SELECT 1
FROM SYS.streams$_prepare_ddl p
WHERE ( (p.global_flag = 1 AND :1 IS NULL)
OR (p.global_flag = 0 AND p.usrid = :2)
AND ROWNUM = 1;
This statement is waiting latch wait event but consistent get higher and higher.
This session seems didn't execute my PL/SQL's main logic and halt at this statement.
And after 5 or 6 hours this session is error out with snapshot too old.
Does anyone know what this statement doing? according to Metalink for create table and create user statement will trigger this statement. But why it takes so long?
Looking forward for your advise...

If you have a problem with latch events, then maybe this session or another session is doing a similar action quite often and using the latches.
I would check for some part of you application that constantly tries to create tables and/or users. Maybe it is possible to change that logic. E.g. use global temp tables.
Also post your database version. Did you migrate recently or is it a fresh install?
@user594309: Think more before posting. And read up about bind variables.

How do i see the sql statements that are run ?

i want to see (in a log file) what are the sql statements that oracle had ran.
how do i do it ? what configurations should i do ? how ?
please help ... thanks

Current SQL statements are viewed in dynamic tables:
SELECT SCHEMANAME, SQL_ADDRESS, SQL_TEXT, last_call_et
FROM V$SESSION, V$SQLAREA
WHERE V$SESSION.SQL_ADDRESS=V$SQLAREA.ADDRESS
A historical log of all SQL statements is recorded in Oracle Archived Logs, and can be viewed using the Oracle Logminer approach. This process requires your database to be in ARCHIVELOG mode, and that Logminer be configured to read the archived logs.

Tracking SQL statements executed

Hi,
After obtaining a connection to my Oracle 10g database using JDBC, I would like to know if there is a way to track all SQL statements executed since the connection was made.
This must be pretty easy, I'm just stumped.
Thank you
Tom

Hi, and it's not that easy. The driver certainly doesn't
keep track of what's been done, but look at the documentation
regarding the logging the driver can be configured to do. It can
print out everything it does, so some level of detail and degree,
and that can be collected in a file and examined externally.
That can be voluminous too... It might be more (or just as)
practical to examine the DBMS-side session-auditing/logging
features the DBMS may have to collect everything the session
has done.
HTH,
Joe Weinstein at BEA Systems

All sql within an uncommitted transaction

Hello,
Is there any way to list the text of all sql statements inside an uncommited transaction?
I am trying to get this data joining the v$session, v$transaction and *v$session views but i can only retrieve the last sql executed.
Thanks in advance!
*Correction: v$sql
Edited by: user9087711 on 13/04/2010 05:43

You can see the user session information in v$session. You can get the row in v$session if you know the SQL in v$sql by joining
v$session.sql_address = v$sql.address AND
v$session.sql_hash_value = v$sql.hash_value
If you want to see who holds uncommitted transactions - they will be holding UNDO, so we can look there. This will show you who has which undo segments and their size.
SET termout ON
SET heading ON
SET PAGESIZE   40
SET LINESIZE   110
SET FEEDBACK   on
COLUMN pgm_notes    FORMAT a80        HEADING 'Notes'
COLUMN rbs          FORMAT a25        HEADING 'Undo Segment'
COLUMN oracle_user FORMAT a12        HEADING 'Oracle|Username'
COLUMN sid_serial   FORMAT a12        HEADING 'SID,Serial'
COLUMN unix_pid     FORMAT a6         HEADING 'O/S|PID'
COLUMN Client_User FORMAT a20        HEADING 'Client|Username'
COLUMN Unix_user    FORMAT a12        HEADING 'O/S|Username'
COLUMN login_time   FORMAT a17        HEADING 'Login Time'
COLUMN last_txn     FORMAT a17        HEADING 'Last Active'
COLUMN undo_kb      FORMAT 99,999,999 HEADING 'Undo KB'
TTITLE CENTER 'Who/What is Using Which Undo/RBS' -
skip Center '~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~' -
skip 2
repfooter off
btitle    off
SELECT r.name                   rbs,
        nvl(s.username, 'None') oracle_user,
        s.osuser                 client_user,
        p.username               unix_user,
        to_char(s.sid)||','||to_char(s.serial#) as sid_serial,
        p.spid                   unix_pid,
--        TO_CHAR(s.logon_time, 'mm/dd/yy hh24:mi:ss') as login_time,
--        TO_CHAR(sysdate - (s.last_call_et) / 86400,'mm/dd/yy hh24:mi:ss') as last_txn,
        t.used_ublk * TO_NUMBER(x.value)/1024 as undo_kb
   FROM v$process     p,
        v$rollname    r,
        v$session     s,
        v$transaction t,
        v$parameter   x
WHERE s.taddr = t.addr
    AND s.paddr = p.addr(+)
    AND r.usn   = t.xidusn(+)
    AND x.name = 'db_block_size'
ORDER
     BY r.name
set feedback onEdited by: ajallen on Apr 13, 2010 9:51 AM

Sql statement monitor

i am looking for sql statement monitor, similar to mssql's sql profiler.
is there tool that allows the user to monitor all sql statements ran by a specific user or sql statements received by a certain schema?
statement tracer for oracle doesn't work. i dont know why.
in EM (10g), there is sessions > sql tab but it is not real time.
i tried toad but i cant easily install it in the client. any other ways of doing it?
any other solutions?
Edited by: jdm811 on Jul 19, 2011 12:59 AM

V$SESSION tells you about current sessions, whether they are active (STATUS), what they are executing (SQL_ID) and other metadata available about the session (MODULE, PROGRAM, MACHINE, TERMINAL, etc).
http://download.oracle.com/docs/cd/B19306_01/server.102/b14237/dynviews_2088.htm#REFRN30223
ASH - Active Session History - contains samples of active sessions - like most dictionary views, etc the exact columns depends on version.
As mentioned above, you need to be licensed for Diagnostic Pack for this.
V$ACTIVE_SESSION_HISTORY is a buffer of active sessions sampled every second.
The buffer is flushed to DBA_HIST_ACTIVE_SESS_HISTORY but by default only 1 in 10 sessions is retained in the repository.
http://download.oracle.com/docs/cd/B19306_01/server.102/b14211/autostat.htm#i35568
If you need more data and more detail than this then you should look at enabling AUDIT:
http://download.oracle.com/docs/cd/B19306_01/server.102/b14220/security.htm#sthref2916

All SQL statements in a session

Similar Messages

Maybe you are looking for