All the traffic go through IPsec tunnel(site to site ) ,but something seems not working correctly

Hi, all,
I have seen a good post in google.com about how to make all the client's traffic though IPsec tunnel then out to the Internet from the Main site,now I attach this configuration and application for discussion, and what the problem is that I am still confused with the configuration on Main site , I hope anyone who can tell me more detail and how to accomplish it. Any answer will be appreciated , thank you !
Quote :
Question ? :
Mine is a very simple configuration. I have 2 sites linked via an IPsec tunnel. Dallas is my Main HQ R1 and Austin R2 is my remote office. I want all traffic from Austin to route thru the tunnel up to Dallas, then out to the Internet.
Dallas (Main) Lan Net is: 10.10.200.0/24
Austin (Remote) LAN Net is: 10.20.2.0/24
The Dallas (Main) site has a VPN config of:
Local Net: 0.0.0.0/0
Remote Net: 10.20.2.0/24
The Austin (Remote) site has a VPN config of:
10.20.2.0/24
Remote Net: 0.0.0.0/0
The tunnel gets established just fine. From the Austin LAN clients, I can ping the router at the main site (10.10.200.1). This is how I know the tunnel is created, but I cannot ping anything beyond the router from the Austin LAN, e.g. 8.8.8.8.
I'm sure it's something simple I failed to configure. Anyone have any pointers or hints?
Answer:
Thanks to Jimp from the other thread, I was able to see why it was not working. To fix, I had to change the Outbound NAT on the main side to Manual. Then I created a new Outbound NAT rule that included the subnet from the Austin network (10.20.2.0). Basically, I just created a copy of the default rule and changed the Source network.
Once I made this change, Voila! Traffic from the remote side started heading out to the Internet. Now all traffic flows thru the Main site. It makes perfect sense why I needed to make this change, it just took a slap in the head from Jimp to point me in the right direction.
My question ?
The answer said "To fix, I had to change the Outbound NAT on the main side to Manual. Then I created a new Outbound NAT rule that included the subnet from the Austin network (10.20.2.0). Basically, I just created a copy of the default rule and changed the Source network." what this mean and
how to do it , could anybody give me the specific configuration ? thanks a lot.

Thank you for Jouni's reply, following is the configuration on Cisco 2800 router ,no firewall enable, :
crypto isakmp policy 100
encr aes 256
authentication pre-share
group 2
crypto isakmp key x.x.x address 0.0.0.0 0.0.0.0
crypto isakmp keepalive 60
crypto ipsec transform-set IPsectrans esp-3des esp-md5-hmac
crypto dynamic-map IPsecdyn 100
set transform-set IPsectrans
match address 102
crypto map IPsecmap 100 ipsec-isakmp dynamic IPsecdyn
interface Loopback1
ip address 10.10.200.1 255.255.255.0
interface FastEthernet0/0
ip address 113.113.1.1 255.255.255.128
ip nat outside
ip virtual-reassembly
duplex auto
speed auto
crypto map IPsecmap
interface FastEthernet0/1
ip address 192.168.1.1 255.255.255.0
ip nat inside
ip virtual-reassembly
duplex auto
speed auto
ip route 0.0.0.0 0.0.0.0 113.113.1.2
ip http server
no ip http secure-server
ip nat inside source list 100 interface FastEthernet0/0 overload
access-list 100 permit ip 192.168.1.0 0.0.0.255 any
access-list 102 permit ip any 10.20.2.0 0.0.0.255

Similar Messages

I'm trying to capture all minimized windows of the browser but something is not working correctly, Why i can't get all the windows ?

The Callback method:
private bool Callback(IntPtr hwnd, int lParam)
if (this.Handle != hwnd && (Constants.GetWindowLongA(hwnd, Constants.GWL_STYLE) & Constants.TARGETWINDOW) == Constants.TARGETWINDOW)
StringBuilder sb = new StringBuilder(100);
Constants.GetWindowText(hwnd, sb, sb.Capacity);
Window t = new Window();
t.Handle = hwnd;
t.Title = sb.ToString();
windows.Add(t);
return true;

Don't know if it's decisive, but lParam should be IntPtr here:
private bool Callback(IntPtr hwnd, IntPtr lParam)
What is Constants.TARGETWINDOW? For retrieving GWL_STYLE, the valid styles (Link) do not contain this name.
Armin

I'm still struggling with being able to sync ipad3 and iphone 4s to itunes after upgrading software to ios 6. I've gone through all the recommendations by Apple and suggestions from other forums and nothing seems to work. Help!!!!!

I'm still struggling with being able to sync ipad3 and iphone 4s to itunes after upgrading software to ios 6. I've gone through all the recommendations by Apple and suggestions from other forums and nothing seems to work. Help!!!!!

Sounds like you have a battry issue but don't want to believe it.
If a car was running fine on one tank of gas, then you filled it up with another tank of gas and it began to run funny, one might suspect that tank of gas. But let's just say coincidence blew a valve-- would you think the new tank of gas was the culprit?
BUT WAIT!! It just might have been! The gas could have been of higher octane and put more more strain on the valves; you know, like going from 87 octane (OS6) to 93 octane (OS7) and showing you the engine was on the edge of compromise.
Sometimes you have to go with common sense. If everything else is ruled out, it must be the battery. And if it runs fine one moment in OS6 but immediately ***** in OS7, I'd believe my battery was suspect-- though comfy-- in OS6 but the OS7 showed its true power.
Moreover, if you had the answer-- or didn't want to believe someone's more competent advice-- why did you even call? You've already shown that you don't know much when you asked if you could go backwards after setting up the new OS as a new phone.
Additonally, if you're such the know-it-all, but yourself the $29 battery and put it in yourself. It's a piece of cake.
<Edited By Host>

I can see the pictures in Events in iPhoto, but I can't open them. When I right click on an Event it just says Edit, but won't open all the pictures in Events. It used to open, but something is wrong. I would appreciate any assistance. Thank you.

I can see the pictures in Events in iPhoto, but I can't open them. When I right click on an Event it just says Edit, but won't open all the pictures in Events. It used to open, but something is wrong. I would appreciate any assistance. Thank you.

Hi Terence,
I got your note and was able to complete the first part, but when I came to Finder, Go To Folder and I typed in both /var/db/receipts/ and /private/var/db/receipts all I get is NOT FOUND message. I tried several times, but no luck.
Please advise.
Thank you.
Catherine Morgan

My ipod touch is disabled for 212,456,786 minutes! I have tried to restore and followd all instructions on the apple support site but this has not worked. Help!

My ipod touch has been disabled for 212,456,875 minutes! I have followed all instructions on the apple support site to restore it but this has not worked. Help!

Without know exactly what you did or what happened:
Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Forgot passcode or device disabled
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

HT4113 I have followed all directions about restarting my ipod after it has locked, but they have not worked. What can I do to fix the Ipod?

I have followed all directions from the website to unlock my ipod when it states Ipod is disabled, but they have not worked. Is there anything else I can do to unlock the Ipod?

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

I asked you last week how i can remove my foto's from the first IPad model,your answer is:connect the IPAD with your pc etc....but that's not working there is no connection,i dont find the IPad in my "computer"( as an extern object) but in my"printers" .

hello ! message to APPLE
sorry for my englisch,I speak Netherlands......
I did everything what you told me in your last mail.......but it's not working,my laptop cannot find the IPad in the "my computer" program;but it finds an "not known I Pad" as on "strang object " in the map for : "apparaten and printers" !!!!
my laptop does not reconigze my IPad !
It is a big problem ,that nobody in the 3 years that I have thid IPad.....can help me iiiiii
I ask this now the last time I think......and maybe I can write to a journalist to put this in the newspaper,........maybe so comes help from the media
anna-louisa

We are fellow users here on these forums, you're not talking to iTunes Support nor Apple.
How did the photos get onto the iPad ? An iPad will only show in Windows Explorer if there are photos on it that were taken with the iPad, copied to it via the camera connection kit, or saved from emails/websites - if the only photos on it were synced to the iPad from a computer then the iPad will not show in Explorer.
That is the computer that the iPad is synced to ?
If they were originally synced to your iPad from a computer then to remove them from your iPad connect your iPad to your computer and select it on the left-hand sidebar of your computer's iTunes under 'devices' (you can enable the sidebar via control-S on a PC)
And then use the Photos tab on the right-hand side of the screen to remove them
To remove all synced photos select an empty folder on that tab and sync that.

I'm having three issues: spellcheck goes off, lastpass not working on all sites, and message boards not working correctly

I'm having three issues with Firefox. I had the latest 10.1, and I just tried Aurora, but that didn't solve my issues.
1) Spell checker keeps going off on messages boards. This happens frequently on 247 sports boards. I enable spell check, make a post, and it's off again when I make another post.
2) On the same 247 board, when I make a post (by clicking the "post reply" button, nothing happens. To get it working I actually have to quit the site and go back in.
3) LastPass plugin is no longer working on all sites. Site like Facebook and Yahoo all of a sudden Lastpass doesn't recognize as having usable fields.

Hi,
Please check if this happens in a [https://support.mozilla.org/en-US/kb/Managing-profiles new profile]. If it's okay, you can later [https://support.mozilla.org/en-US/kb/Recovering%20important%20data%20from%20an%20old%20profile?s=profile&r=1&e=sph&as=s copy the needed personal data] from the old profile. Firefox stores your personal data and settings in another location separate from its [http://kb.mozillazine.org/Installation_directory files/folder]. A new profile would have the default Firefox settings ('''Tools''' ('''Alt''' + '''T''') > [https://support.mozilla.org/en-US/kb/Options%20window '''Options'''], and [http://kb.mozillazine.org/About:config about:config] ), and usually would also be empty of any '''Extensions''' and themes ('''Appearance''') in Tools > Add-ons) and their settings. Also, a new profile would have no previous stored website data/settings etc., ('''Tools''' > [https://support.mozilla.org/en-US/kb/Clear%20Recent%20History '''Clear Recent History''']).
[https://support.mozilla.org/en-US/kb/Profiles?s=profile&r=2&e=sph&as=s Profiles Howto]
[http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder & Files]
[http://kb.mozillazine.org/About:config_entries about:config Entries]

Uploaded Bootstrap based site onto BC and not working correctly using IE8

Having a problem with a Bootstrap based site that I've uploaded to a BC test site. Seems OK when viewed by everything except IE8. I have all the usual IE8 workarounds in and these work correctly on my usual external server and local host but not on BC test site . Will this resolve itself when the site goes live ?

Version 2 is fine to work with, it's a well designed structure. Version 3 uses some new CSS (some style name changes and new styles replacing others). The IE8 issue could be related to a new base styles. Before you do anything check/compare the paths or the CSS and JS between versions.
Maybe test Bootstrap 3 without any javascript, and just a very basic layout of a header, a few columns and a footer. If the IE8 issue persists, try removing CSS style tags until it breaks or resolves. Of course it may break first, so create a custom CSS file and copy the styles you want to test into that, then you can look at editing the custom copy until it resolves or breaks (don't edit the original Bootstrap CSS file as you custom CSS can override it providing you place it in the page header after the main CSS). There's a good chance you'll find the problem.
Also see:
http://getbootstrap.com/getting-started/#migration
Message was edited by: Simon Darby

Safari does not support community toolbar ive searched my computer for the following like people have said in similar posts but none seem to work /Library/Application Support/Conduit /Library/InputManagers/CTLoader /Library/Receipts/ctloa

hey all i know that there have been many post about this community toolbar thing that pops up when opening Safari
i have searched my computer for the things that have been posted in the other posts to delete
/Library/Application Support/Conduit     (no conduit in folder)
/Library/InputManagers/CTLoader         (i dont have input managers i have input methods but still no CTLoader)
/Library/Receipts/ctloader.pkg                (no ctloader.pkg)
/Library/Receipts/<Toolbar name>.pkg      (nothing in this one either)
/Library/Application Support/SIMBL/Plugins/CT2285220.bundle         (NADA)
/Users/<User name>/Library/Application Support/Conduit           (NOTHING EITHER)
where / is the root library on your Hard Disk.
If you are running Snow Leopard you should also look here:
Library/launchAgents/com.conduit.loader.agent.plist
Library/Application support/conduit plugins
i have pretty much looked everywhere i dont even know where this thing came from
can anyone lend some advise i really do not want to take the 2 hour ride to apple to get this off my computer
thanks so much

When you see this path:   /Library   That is your root Library.
Open a Finder window.
Select MacintoshHD in the Sidebar on the left then open the LIbrary folder then the Application Support folder, then InputManagers folder, the Receipts folder.
For this path: ~/Library/Application Support (your Home library)
The Tilde character ~ represents your Home folder.
From that same Finder window select your Home folder in the Sidebar. It has a small house icon. Open the Library folder then the Application Support folder.
Move all the Conduit/CT associated files you posted above to the Trash.
Try Safari.
I've yet to find the launchAgents.plist file in any Safari crash report in years. I don't think that's a problem.
Another way to find files on your hard drive is to go to your Finder.
From the menu bar at the top of your screen click Go / Go to Folder.
Example. Type in: /Library/ApplicationSupport   click Go
Or type in: ~/Library/Application Support   click Go

I cant open Photos om my mac. Just upgraded to Yosemite. The message I get is: An unexpected error has occurred. Please quit and restart the application. I have done this several times but nothing seems to work. iPhoto is gone. What do I do?

I just upgraded to Yosemite on my mac from 2010. Everything seems to work, accept Photos. When I try to open it i push the "Get started" button, then the picture with "Preparing Library" comes up. Then a message appears with the text "An unexpected error has occurred. Please quit and restart the application." I have done this several times, but nothing happens. What do I do?

I just upgraded to Yosemite on my mac from 2010. Everything seems to work, accept Photos. When I try to open it i push the "Get started" button, then the picture with "Preparing Library" comes up. Then a message appears with the text "An unexpected error has occurred. Please quit and restart the application." I have done this several times, but nothing happens. What do I do?

Trying to get the contact phone number on Verizon site and it is not working

I am trying to call teh Customer Support number to discuss my Order, but when I go to the Contact Us page and click on the Call Us link, I get a pop-up asking for my zip code and then I am taken right back to the Contact US - no phone #'s given.   This feature worked when I used it last Friday during normal business hours.
I also tried the Live Chat link to see if I could engage a live person that way.   This time the link took me to a page that gave me the option of linking to the Support Knowledge base or accessing the automated customer support 'person' (which is just an FAQ interface).
Help - how can I talk to a live person.    If live help (via phone or chat) is limited to certain hours, that should be posted.   user should not be given the virtual version of the run-around.
Does anyone have the technical contact phone number for Maryland/DC region?

1-800-VERIZON
1-888-553-1555
Both numbers feel like they hit the same place, and I know verizon has been consolidating all their numbers to the main one - so stick with that.
if you ever have trouble finding a contact number for any company, www.gethuman.com is a good resource

I have a i phone 3 that is disabled and i am trying to get all the pictures and videos offof it or unlock it but it has not been synced to itunes. what should i do?

i have an i phone 3 that is disabled.I am trying to get pictures off of it or unlock it but it is not synced with itunes. i would really like to just unlock it.what should i do?

If it's disabled then it's too late to copy anything off it, there are instructions on this page for how to reset a disabled device : http://support.apple.com/kb/HT1212

How do I transfere a playlist from my iPod to my computer, which I made on my computer from all my songs. I've tried export and import, but they are not working.

I accidently created a playlist sitting at my computer but saved to my iPod. I would like the playlist on my Itunes library so my husband can put the play list on his ipod which is also synced to my/our computer.
I tried to export the playlist then import. It seems like it imported, but i don't see it. How do I find it? on the videos I watched the playlist just shows up in the iTunes library playlist column.
It did not. What do I do next?
Thanks

Transfer files between your iPod touch, iPhone, or iPad and your computer
Connect your device to your computer.
Click the device button, then click Apps.
Below File Sharing (you might need to scroll down to see it), in the list on the left, select the app on your device that you want to transfer a file to or from.
Do one of the following:
Transfer a file from your computer to your device: Click Add, select the file you want to transfer, and click Open.
Transfer a file from your device to your computer: Select the file you want to transfer in the list on the right, click “Save to,” select where you want to save the file, and click Open.
The file is transferred to your device or saved in the location you specified on your computer.
On your device, the file can be opened in the app you selected in step 3.
Hope this helps

My phone is stuck on the on off cycle. I've tried the "recovery mode" steps I found on several websites but it did not work. What do I do??

my phone all of a sudden shut off. When I tried restarting it, it showed the apple logo then drifted off again. It has continued this process for over 3 hours now, I have searched several websites for what to do and all have said it is in "recovery mode." I followed the steps listed on those websites and the phone is still doing it. At one point it showed the "low battery" screen so I plugged it in, it started the on off cycle again. please help!

Hi,
You could see if this helps...
DFU Mode / Unable to Update or Restore
http://support.apple.com/kb/HT1808
DFU Mode
Open iTunes and Connect the iPod to your Mac
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time
After 10 Seconds release the Sleep/Wake Button until iTunes tells you it has Detected an iPod in Recovery Mode...
The Phone Screen will remain Black... Now Restore.
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414

All the traffic go through IPsec tunnel(site to site ) ,but something seems not working correctly

Similar Messages

Maybe you are looking for