Allocating queues exclusively to app servers at the queue name level

I am wondering if there is a way we can achieve this
Let us say
When materials(r3ad_mat) and customers(r3ad_cust) are loading we want to assign these queues in the following way
material queues
R3AD_MAT* and csapr_mat* to app server 1 & app server 2
customer queues
r3ad_cust* and csabupa* to app server 1 & app server 2
sales order queues
r3ad_sales* to csa_order* exclusively to app server 3
This way app server 3 will be clear of the data loads and will be utilized for dialog users and sales orders.
Thanks in advance for your help.
PB

If the new server has the same users, and ldap reflects that, you can simply copy the entire queue over from the old box to the new box. You don't even have to stop the new server.
After your copy is complete, you can either wait for the server to notice the new files, or you can run
imsimta cache -sync
to tell it to re-read the queues.

Similar Messages

  • How to create reports servers with the same name in two nodes in Reports

    Greetings
    We are migrating Oracle Application Server 10g (9.0.4) to a better hardware infrastructure with high availability. We want to provide 2 new Oracle Application Server 10g (9.0.4) in High availability and we want to avoid modify the existing forms and reports code, but the code is looking for a specific reports server name when calling reports, but I couldn't create the same reports server name in the both oas machines, I could create the reports server in only one node. I want to create a reports server with the same name in both nodes but it is not possible. I know that there is a procedure to do that in 10.1,2 (Note 437228.1, How to Create Two Reports Servers With the Same Name in the Same Subnet) but I couldn't find the equivalent procedure in 9.0.4.
    Anybody kwows how to create a reports server with the same name in two nodes using 10g (9.0.4)
    Thanks
    Ramiro Ortiz.

    Hello.
    I applied the patch 4092150 on my oas 9.0.4.2 and I modified my rwnetwork.conf file changing the port to 14022 by following the note "How to Create Two Reports Servers With the Same Name in the Same Subnet? [ID 437228.1]" but I am facing the same error rep-56040 "server already exists in the network".
    When I run osfind command I get the following information (My reports server is senarep and I want to create it on SNMMBOGOAS10):
    osfind: Found 2 agents at port 14000
    HOST: SNMVBOGOAS10.sena.red
    HOST: SNMVBOGOAS09.sena.red
    osfind: There are no OADs running on in your domain.
    osfind: There are no Object Implementations registered with OADs.
    osfind: Following are the list of Implementations started manually.
    HOST: SNMVBOGOAS10.sena.red
    REPOSITORY ID: IDL:oracle/reports/server/EngineComm:1.0
    OBJECT NAME: senarep2
    REPOSITORY ID: IDL:oracle/reports/server/ServerClass:1.0
    OBJECT NAME: senarep2
    HOST: SNMVBOGOAS09.sena.red
    REPOSITORY ID: IDL:oracle/reports/server/EngineComm:1.0
    OBJECT NAME: senarep
    REPOSITORY ID: IDL:oracle/reports/server/ServerClass:1.0
    OBJECT NAME: senarep
    Any Ideas?

  • How do I stop Launchpad renaming my App Icons with the wrong name

    How do I stop Launchpad renaming my App Icons with the wrong name (E.G. Evernote is now called Google Chrome). Also, how do I change the name back to what it is supposed to be. 
    Why do some of my app icons dissappear altogether? This feels very buggy to me.

    It sorted itself out. A glitch?

  • Report servers with the same name ?

    We have multiple report clusters on the same subnet.
    If clusters have the same name, then how you can view them in the report queue?
    TIA

    Hi Michael,
    Suppose your cluster is cluster1. Now if another organization starts a reports server with the same extension (eg, rep123.cluster1), then that reports server will become part of your cluster.
    So the summary is that you cannot have 2 different clusters with the same name in the same subnet. That is why it is necessary that you choose a name that you think should be unique.
    Navneet.

  • SSO App Config : 0xC0002A1C, The account name is not valid or does not exist.

    Hi there,
    We are using BizTalk Server 2010, I want to use the SSO to store and modify sensitive data. I am trying to automate through scripts the creation and updates of the SSO.
    So I used the sso manage to create the sso application where I want to store my data. Everything works fine. Then when I try to access the data
    I got the error :
    SSO AUDIT
     Function: GetConfigInfo (ConfigProperties)
     Tracking ID: 701b9529-a356-4bdd-ac63-d8152a838370
     Client Computer: <MyComputer> (SSOApp.exe:4508)
     Client User: <Domain>\<BizTalkUser>
     Application Name: <SsoApplication I just created with ssomanage>
     Error Code: 0xC0002A1C, The account name is not valid or does not exist.
    Check group membership failed.
     Group Name: <Domain>\<BizTalkUserGroup>
     Account Name: $ConfigStore$\ConfigProperties
     Additional Data: 533
     Error Code: 0xC0002A1C, The account name is not valid or does not exist.
    By googling I seem to be missing one step related to
    BTSScnSSOApplicationConfig.exe But I looked everywhere, I didn't know where to find this exe file. Do I have to download something? Where can I find it? was it renamed to something else?
    Thx for any help,
    Stefan

    Hello,
    I found finally the solution to my problem.
    You'll need to use the ssomanage and use the to
    BTSScnSSOApplicationConfig.exe found in the link mentionned previously.
    In order for it to work, a special attention needs to be paid to the AffiliateApplication.xml
    The contact XmlElement is important (it's not an email address as I used to think (smile))
    Regards,
    Reporting Solution for BizTalk |
    follow-us on twitter

  • Apps Servers Via SAPMMC

    We centralize our 3 apps servers on the central instance when starting and stopping SAP via sapmmc. Now, all of the sudden, I can only start the central instance and can't start/stop any of the apps server. I am getting "Cannot connect to sapservice on (appserver#): 80070005, Access denied".
    I tried re-registering all the sapmmc*.dll but not successful. Can someone shed some light on this issue please.
    We are using SAP Enterprise 4.7 running on WIndows 2000 and SQL 2000.
    SAPMMC configuration
    C1 (Central Instance server)
    A1 (App Server 1)
    A2 (App Server 2)
    A3 (App Server 3)

    Thanks very much Subhadip. I did add all the app servers to the SAPMMC snap-in. After I addded all of them, the app servers are showing as grayed and only the central instance is green meaning active. When clicking on any of the app servers, I got cannot connect to <appserver> , access denied. As I read many threads and realize that it might be the DCOM causing all this trouble but I am skeptical in re-registering using DCOM. I have checked the security on sapstartsrv.exe and all look fine.
    Thanks for the RZ03 tcode. I will try that over the weekend and will report next week on the outcome.
    Really appreciated your help for responding to my issue.

  • Connecting 2 WLS 7 servers via the Messaging Bridge

    Hi,
              I am trying to use the messaging bridge to post messages received on a
              source JMS queue running in one WLS instance to a destination queue running
              on another target WLS instance. I have followed the instructions in the
              admin guide and performed the following:
              - defined in the source WLS instance 2 JMS bridge destinations - one for the
              source queue and one for the target queue
              - defined the bridge between the 2 destination, using the jms-xa-adp.rar
              - deployed the jmx-xa-adp.rar adapter to the source WLS instance
              - enabled the XA connection factory (had to define a new connection factory
              to do this)
              - made sure that both WLS instances have the system user configured with the
              same password
              When the source WLS instance starts up, the following is logged to the
              console:
              weblogic.jms.common.JMSException: Connection not found
              at
              weblogic.jms.dispatcher.InvocableManager.invocableFind(InvocableManager.java
              :134)
              at
              weblogic.jms.dispatcher.Request.wrappedFiniteStateMachine(Request.java:592)
              at
              weblogic.jms.dispatcher.DispatcherImpl.dispatchSync(DispatcherImpl.java:275)
              at
              weblogic.jms.client.JMSConnection.createSession(JMSConnection.java:368)
              at
              weblogic.jms.client.JMSXAConnection.createXAQueueSession(JMSXAConnection.jav
              a:75)
              at
              weblogic.jms.adapter.JMSBaseConnection.startInternal(JMSBaseConnection.java:
              257)
              at
              weblogic.jms.adapter.JMSBaseConnection.start(JMSBaseConnection.java:215)
              at
              weblogic.jms.adapter.JMSManagedConnectionFactory.createManagedConnection(JMS
              ManagedConnectionFactory.java:1
              at
              weblogic.connector.common.internal.ConnectionPool.makeResources(ConnectionPo
              ol.java:1002)
              at
              weblogic.connector.common.internal.ConnectionPool.getConnection(ConnectionPo
              ol.java:1777)
              at
              weblogic.connector.common.internal.ConnectionPoolManager.getConnection(Conne
              ctionPoolManager.java:190)
              at
              weblogic.connector.common.internal.ConnectionManagerImpl.allocateConnection(
              ConnectionManagerImpl.java:25)
              at
              weblogic.jms.adapter.JMSBaseConnectionFactory.getTargetConnection(JMSBaseCon
              nectionFactory.java:126)
              at
              weblogic.jms.bridge.internal.MessagingBridge.getConnections(MessagingBridge.
              java:753)
              at
              weblogic.jms.bridge.internal.MessagingBridge.execute(MessagingBridge.java:91
              9)
              at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:213)
              and any messages sent to the source queue just sit there.
              What might I be missing? Am I correct that the configuration of the bridge
              and destinations takes place at the source WLS instance (as this is posting
              the messages to the target WLS) - the documentation seems to me a bit
              ambiguous in this regard.
              Thanks,
              Stanley.
              

    I am afraid that you'll have to enable security interoperability for
              the bridge to work across two domains. Making the password for
              system user is not enough. You have to disable generated credential
              for both domains. For details, please look at the following link:
              http://edocs.bea.com/wls/docs70/adminguide/msgbridge.html#1078380
              Please also note that this requirement has been removed in 8.1 release and
              7.0SP3.
              Thanks
              Dongbo
              Stanley Beamish wrote:
              > "Dongbo Xiao" <[email protected]> wrote in message
              > news:[email protected]...
              > > I suspect that the two WebLogic servers have the same name.
              > > There are some naming restrictions in the WLS configuration.
              > > Please take a look at the following link.
              > > http://e-docs.bea.com/wls/docs70/adminguide/msgbridge.html#1076982
              > >
              > > Dongbo
              >
              > OK, I've changed the name of one of the servers and I can get further. But
              > now I get the following exception on the server that hosts the bridge,
              > relating to permissions. Both servers use the same system password.
              >
              > Thanks,
              > SB
              >
              > java.lang.SecurityException: Invalid Subject: principals=[system,
              > Administrators, Operators, Monitors, Deployers]
              > at
              > weblogic.security.service.SecurityServiceManager.seal(SecurityServiceManager
              > .java:993)
              > at
              > weblogic.security.service.RoleManager.getRoles(RoleManager.java:277)
              > at
              > weblogic.security.service.AuthorizationManager.isAccessAllowed(Authorization
              > Manager.java:589)
              > at weblogic.jms.JMSService.checkPermission(JMSService.java:1064)
              > at weblogic.jms.JMSService.checkRecvPermission(JMSService.java:1076)
              > at
              > weblogic.jms.frontend.FESession.consumerCreate(FESession.java:944)
              > at weblogic.jms.frontend.FESession.invoke(FESession.java:2252)
              > at
              > weblogic.jms.dispatcher.Request.wrappedFiniteStateMachine(Request.java:602)
              > at
              > weblogic.jms.dispatcher.DispatcherImpl.dispatchSync(DispatcherImpl.java:275)
              > at
              > weblogic.jms.client.JMSSession.consumerCreate(JMSSession.java:1592)
              > at
              > weblogic.jms.client.JMSSession.createConsumer(JMSSession.java:1452)
              > at
              > weblogic.jms.client.JMSSession.createReceiver(JMSSession.java:1302)
              > at
              > weblogic.jms.adapter.JMSBaseConnection.setMessageListenerInternal(JMSBaseCon
              > nection.java:931)
              > at
              > weblogic.jms.adapter.JMSBaseConnection.setMessageListener(JMSBaseConnection.
              > java:885)
              > at
              > weblogic.jms.adapter.JMSConnectionHandle.setMessageListener(JMSConnectionHan
              > dle.java:121)
              > at java.lang.reflect.Method.invoke(Native Method)
              > at
              > weblogic.connector.common.internal.ConnectionWrapper.invoke(ConnectionWrappe
              > r.java:101)
              > at $Proxy103.setMessageListener(Unknown Source)
              > at
              > weblogic.jms.bridge.internal.MessagingBridge.beginForwarding(MessagingBridge
              > .java:862)
              > at
              > weblogic.jms.bridge.internal.MessagingBridge.execute(MessagingBridge.java:94
              > 2)
              > at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:213)
              > at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:189)
              >
              > >
              > > Stanley Beamish wrote:
              > >
              > > > Hi,
              > > >
              > > > I am trying to use the messaging bridge to post messages received on a
              > > > source JMS queue running in one WLS instance to a destination queue
              > running
              > > > on another target WLS instance. I have followed the instructions in the
              > > > admin guide and performed the following:
              > > >
              > > > - defined in the source WLS instance 2 JMS bridge destinations - one for
              > the
              > > > source queue and one for the target queue
              > > > - defined the bridge between the 2 destination, using the jms-xa-adp.rar
              > > > - deployed the jmx-xa-adp.rar adapter to the source WLS instance
              > > > - enabled the XA connection factory (had to define a new connection
              > factory
              > > > to do this)
              > > > - made sure that both WLS instances have the system user configured with
              > the
              > > > same password
              > > >
              > > > When the source WLS instance starts up, the following is logged to the
              > > > console:
              > > >
              > > > weblogic.jms.common.JMSException: Connection not found
              > > > at
              > > >
              > weblogic.jms.dispatcher.InvocableManager.invocableFind(InvocableManager.java
              > > > :134)
              > > > at
              > > >
              > weblogic.jms.dispatcher.Request.wrappedFiniteStateMachine(Request.java:592)
              > > > at
              > > >
              > weblogic.jms.dispatcher.DispatcherImpl.dispatchSync(DispatcherImpl.java:275)
              > > > at
              > > > weblogic.jms.client.JMSConnection.createSession(JMSConnection.java:368)
              > > > at
              > > >
              > weblogic.jms.client.JMSXAConnection.createXAQueueSession(JMSXAConnection.jav
              > > > a:75)
              > > > at
              > > >
              > weblogic.jms.adapter.JMSBaseConnection.startInternal(JMSBaseConnection.java:
              > > > 257)
              > > > at
              > > > weblogic.jms.adapter.JMSBaseConnection.start(JMSBaseConnection.java:215)
              > > > at
              > > >
              > weblogic.jms.adapter.JMSManagedConnectionFactory.createManagedConnection(JMS
              > > > ManagedConnectionFactory.java:1
              > > > )
              > > > at
              > > >
              > weblogic.connector.common.internal.ConnectionPool.makeResources(ConnectionPo
              > > > ol.java:1002)
              > > > at
              > > >
              > weblogic.connector.common.internal.ConnectionPool.getConnection(ConnectionPo
              > > > ol.java:1777)
              > > > at
              > > >
              > weblogic.connector.common.internal.ConnectionPoolManager.getConnection(Conne
              > > > ctionPoolManager.java:190)
              > > > at
              > > >
              > weblogic.connector.common.internal.ConnectionManagerImpl.allocateConnection(
              > > > ConnectionManagerImpl.java:25)
              > > > at
              > > >
              > weblogic.jms.adapter.JMSBaseConnectionFactory.getTargetConnection(JMSBaseCon
              > > > nectionFactory.java:126)
              > > > at
              > > >
              > weblogic.jms.bridge.internal.MessagingBridge.getConnections(MessagingBridge.
              > > > java:753)
              > > > at
              > > >
              > weblogic.jms.bridge.internal.MessagingBridge.execute(MessagingBridge.java:91
              > > > 9)
              > > > at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:213)
              > > >
              > > > and any messages sent to the source queue just sit there.
              > > >
              > > > What might I be missing? Am I correct that the configuration of the
              > bridge
              > > > and destinations takes place at the source WLS instance (as this is
              > posting
              > > > the messages to the target WLS) - the documentation seems to me a bit
              > > > ambiguous in this regard.
              > > >
              > > > Thanks,
              > > > Stanley.
              > >
              [att1.html]
              

  • Installing multiple web/app servers

    Hi all.
    Hope someone can help out with this  (BPC 5.1)
    We have a live environment with 2 SQL boxes (clustered), plus 3 Web/App Servers which are all configured to go through a load-balancer.
    I'm trying to setup a DR set of servers, and have built the clustered SQL boxes, plus 1 Web/App server.
    Trouble is that I don't yet have a working load balancer on that site.
    My questions are:
    Do I need the load balancer setup first, then enter the LB address in the "Reporting Server", "Web Server" and "App Server" boxes during BPC install?
    Would the lack of a load balancer prevent me from setting up more than one Web/App server, as the 2nd one just hangs about 3/4 of the way through the BPC installation and tells me nothing.
    Finally, if the answer to the first question is "yes", will I have to uninstall/re-install BPC, or can I just change the settings in Server Options?
    Thanks
    Craig

    Thanks Carlos
    I've now sorted the problem.
    For anyone else attempting the same thing:
    The load-balancer MUST be referred to by DNS name (e.g. NOT by IP address)
    The load-balancer name is entered in the following fields in Server Option on the App Servers:
    Reporting Services Server Name
    Reporting Services Server External Name
    Application Server External Name
    Application Server Virtual Name
    Web Server External Name
    Web Server Virtual Name
    Then, once you hit Update on your second App server, you wind up with over 50 rows in the tblServerInfo table (within the AppServer database).
    This needs to be backed up, all rows deleted, then go into Server Options on one of your App servers and hit "Update" again.
    That way, you get just the normal 32 rows in the table again.
    Hope that helps (and makes some kind of sense)
    Craig
    Edited by: Craig Aucott on Jun 30, 2009 11:18 AM

  • Messages stuck in the queue... how do I make them to be processed again?

    Hi,
    I'm new to SAP PI and kinda confused with queues.
    I have file -> bpm -> file scenario and there was an error in mapping within bpm process.
    When I went to qRFC Monitor (smq2), I see that in XBQO$PE_WS90000002 queue,
    there's an error, 'Permanent error in BPE inbound processing'... which is expected.
    Now, I run the interface scenario again several times but they don't get processed
    but stuck in the same queue. At this stage, I didn't know what to do...
    I thought by deleting the error message, other messages will be processed...
    I deleted the error message but the other messages are still in the queue...
    I have two questoins.
    1. What is the best way to handle an error in the queue... can I just delete it? or is there a better way to handle an error in the queue?
    2. After deleting the queue, what should I do to make the other messages to be processed again...
    Thank you.
    -Won

    Hi Won,
    There are programs for restarting the LUW entries:
    programs
    · RSARFCRD: tRFC Monitor (transaction SM58)
    · RSARFCSE: Restart an LUW (background job)
    · RSARFCEX: Restart tRFC LUWs (background job)
    · RSQOWKEX: Restart QOUT qRFC LUWs
    · RSQIWKEX: Restart QIN qRFC LUWs
    · RSARFCSE: Delete an LUW (background job)
    · RSARFCER: Delete various LUWs
    Also, check the url:
    http://help.sap.com/saphelp_nw04/helpdata/en/25/bcfa40badbf46fe10000000a1550b0/content.htm
    Hope this helps.
    Regards,
    Sushama

  • My file yet in the queue (30 hours)! queue doesn't work?

    I submited a .doc file to convert to pdf about 30 hours ago and viewing the status appear still in the queue. Could it be that the queue is not working now?

    Is the adapter the genuine Apple product or a copy

  • Two Domain Controllers with the Same Name

    So I was working on setting up our new branch office DC. Anyway, the server failed to join the domain the first time because it upgraded the AD schema (This was our first 2012 R2 server) and the schema wasn't synced to all the other remote offices. So I
    forced a sync, joined the server as a workstation, then made it a domain controller.
    Anyway, after that the server would show itself as a DC in Active Directory, but all the other servers believed it was just a workstation. So, I removed Active Directory from the server (I had to force the removal). I reset the computer account on the local
    DCs, then rejoined it to the domain and made it a domain controller again. This time, it appeared as a Domain Controller on the other DCs in the domain.
    Now for the issue --- I've now got two objects for the server under AD Sites and Services. One of them doesn't appear to have any AD DS connections. The other has connections, but not all of them work correctly (I get errors when I tell certain connections
    to sync).
    What should I do to fix this?
    I'm still in the setup phase of this, so I can do anything I want with this particular server. I was thinking I would demote from a Domain Controller, remove it from the domain. Then use ntdsutil to cleanup any other metadata that is hanging around in AD (Something
    like: https://support.microsoft.com/KB/216498?wa=wsignin1.0 )
    Does anyone else have suggestions on what I should do to fix this? --- I'm being overly cautious here as I do not want to mess anything up in Active Directory.
    Thanks!
     

    I have not done a metadata cleanup.... I was asking if I should.
    The connections on the valid server appeared to be working before I deleted them (Maybe it took a while to replicate ? )
    So I went through and deleted all the AD Sites and Services connections from both servers (The broken server had 5 connections to the same DC in another site). Anyway, I ran repadmin /kcc and it regenerated a connection to a server in the remote site, but
    it also generated a connection between the two servers with the same name. I ran dcdiag after I did the repadmin /kcc. Anyway it shows:
    Directory Server Diagnosis
    Performing initial setup:
    Trying to find home server...
    Home Server = DC-01-CLE
    * Identified AD Forest.
    Done gathering initial info.
    Doing initial required tests
    Testing server: Cleveland\DC-01-CLE
    Starting test: Connectivity
    ......................... DC-01-CLE passed test Connectivity
    Testing server:
    Cleveland\DC-01-CLE\0ACNF:203cf49f-8cb3-4915-b122-be31ddd6e10e
    Starting test: Connectivity
    [DC-01-CLE\0ACNF:203cf49f-8cb3-4915-b122-be31ddd6e10e]
    DsBindWithSpnEx() failed with error 5,
    Access is denied..
    Got error while checking LDAP and RPC connectivity. Please check your
    firewall settings.
    DC-01-CLE\0ACNF:203cf49f-8cb3-4915-b122-be31ddd6e10e failed test
    Connectivity
    Doing primary tests
    Testing server: Cleveland\DC-01-CLE
    Starting test: Advertising
    ......................... DC-01-CLE passed test Advertising
    Starting test: FrsEvent
    ......................... DC-01-CLE passed test FrsEvent
    Starting test: DFSREvent
    ......................... DC-01-CLE passed test DFSREvent
    Starting test: SysVolCheck
    ......................... DC-01-CLE passed test SysVolCheck
    Starting test: KccEvent
    A warning event occurred. EventID: 0x80000785
    Time Generated: 12/15/2014 09:58:02
    Event String:
    The attempt to establish a replication link for the following writable directory partition failed.
    A warning event occurred. EventID: 0x80000785
    Time Generated: 12/15/2014 09:58:02
    Event String:
    The attempt to establish a replication link for the following writable directory partition failed.
    A warning event occurred. EventID: 0x80000785
    Time Generated: 12/15/2014 09:58:02
    Event String:
    The attempt to establish a replication link for the following writable directory partition failed.
    A warning event occurred. EventID: 0x80000785
    Time Generated: 12/15/2014 09:58:11
    Event String:
    The attempt to establish a replication link for the following writable directory partition failed.
    A warning event occurred. EventID: 0x80000785
    Time Generated: 12/15/2014 09:58:11
    Event String:
    The attempt to establish a replication link for the following writable directory partition failed.
    A warning event occurred. EventID: 0x80000785
    Time Generated: 12/15/2014 09:58:11
    Event String:
    The attempt to establish a replication link for the following writable directory partition failed.
    A warning event occurred. EventID: 0x80000785
    Time Generated: 12/15/2014 10:03:37
    Event String:
    The attempt to establish a replication link for the following writable directory partition failed.
    A warning event occurred. EventID: 0x80000785
    Time Generated: 12/15/2014 10:03:37
    Event String:
    The attempt to establish a replication link for the following writable directory partition failed.
    A warning event occurred. EventID: 0x80000785
    Time Generated: 12/15/2014 10:03:37
    Event String:
    The attempt to establish a replication link for the following writable directory partition failed.
    ......................... DC-01-CLE passed test KccEvent
    Starting test: KnowsOfRoleHolders
    ......................... DC-01-CLE passed test KnowsOfRoleHolders
    Starting test: MachineAccount
    ......................... DC-01-CLE passed test MachineAccount
    Starting test: NCSecDesc
    ......................... DC-01-CLE passed test NCSecDesc
    Starting test: NetLogons
    ......................... DC-01-CLE passed test NetLogons
    Starting test: ObjectsReplicated
    ......................... DC-01-CLE passed test ObjectsReplicated
    Starting test: Replications
    ......................... DC-01-CLE passed test Replications
    Starting test: RidManager
    ......................... DC-01-CLE passed test RidManager
    Starting test: Services
    ......................... DC-01-CLE passed test Services
    Starting test: SystemLog
    A warning event occurred. EventID: 0x00001795
    Time Generated: 12/15/2014 10:03:37
    Event String:
    The program lsass.exe, with the assigned process ID 600, could not authenticate locally by using the target name LDAP/a23a13d0-8434-4344-bd6b-24fdf5576329._msdcs.mydomain.local. The target name used is not valid. A target name should refer to one of the local computer names, for example, the DNS host name.
    ......................... DC-01-CLE passed test SystemLog
    Starting test: VerifyReferences
    ......................... DC-01-CLE passed test VerifyReferences
    Testing server:
    Cleveland\DC-01-CLE\0ACNF:203cf49f-8cb3-4915-b122-be31ddd6e10e
    Skipping all tests, because server
    DC-01-CLE\0ACNF:203cf49f-8cb3-4915-b122-be31ddd6e10e is not responding to
    directory service requests.
    Running partition tests on : DomainDnsZones
    Starting test: CheckSDRefDom
    ......................... DomainDnsZones passed test CheckSDRefDom
    Starting test: CrossRefValidation
    ......................... DomainDnsZones passed test
    CrossRefValidation
    Running partition tests on : ForestDnsZones
    Starting test: CheckSDRefDom
    ......................... ForestDnsZones passed test CheckSDRefDom
    Starting test: CrossRefValidation
    ......................... ForestDnsZones passed test
    CrossRefValidation
    Running partition tests on : Schema
    Starting test: CheckSDRefDom
    ......................... Schema passed test CheckSDRefDom
    Starting test: CrossRefValidation
    ......................... Schema passed test CrossRefValidation
    Running partition tests on : Configuration
    Starting test: CheckSDRefDom
    ......................... Configuration passed test CheckSDRefDom
    Starting test: CrossRefValidation
    ......................... Configuration passed test CrossRefValidation
    Running partition tests on : mydomain
    Starting test: CheckSDRefDom
    ......................... mydomain passed test CheckSDRefDom
    Starting test: CrossRefValidation
    ......................... mydomain passed test CrossRefValidation
    Running enterprise tests on : mydomain.local
    Starting test: LocatorCheck
    ......................... mydomain.local passed test LocatorCheck
    Starting test: Intersite
    Doing intersite inbound replication test on site Cleveland:
    ......................... mydomain.local passed test Intersite
    I've attached a screenshot of AD Sites and Services. Please note I've erased some info for privacy reasons (The site the other DC is in has been erase as well as part of its name).
    Picture of AD Sites and Services

  • Two AM's with the same name but different forms causes Deployment problems

    Two Masters forms, DOC & PM are cloned except for the "where clause" in the View's query and the titles in their JSP's.
    DOC workspace has a BC project and a BC4JSP Project. The BC project comprises of the EO and VO named ComVsStaticValue. In the Edit prop-> query for the VO I have specified the "where clause" as VSSV_VS_CODE='DOCTOR'.
    In Java Webserver :-
    The JSP's are located in C:\source\Doctor\ .. and the *.xml and *.class files generated by the BC proj is in C:\source\Doctor\pol_ValueSet\..
    If I execute Doctor in JWS the records are getting filtered properly.
    PM workspace has a BC project and a BC4JSP Project. Again The BC project comprises of the EO and VO named ComVsStaticValue. In the Edit prop-> query for the VO I have specified the "where clause" as VSSV_VS_CODE='PAY_MODE'.
    In Java Webserver :-
    The JSP's are located in C:\source\PMode\ .. and the *.xml and *.class files generated by the BC proj is in C:\source\PMode\pol_ValueSet\..
    If I execute PM in JWS, the PM's JSP comes (the title is correct) but the records pertaining to DOC appears. I checked the View's xml file in C:\source\PMode\pol_ValueSet\ the "where clause" is correct. The xml & classes have the same name but their contents are different.
    I want to know whether this problem is because both have the same name for the AM and the BC4JSP's property file.
    Please clarify.

    Deploying two app modules with the same name will definitely cause problems.
    The JSPs use the information in the properties file to connect to the application module and get the data they need from the appropriate View Objects in those app modules. If you have two app modules with the same name, when a JSP tries to connect, it has no way of knowing which one of the app modules to connect to if they both have the same name.
    You could:
    1. Just use one application module that contains all the View Objects you need to access.
    or
    2. Rename one of the application modules or the package it is located in so the names are distinct. If you choose this method, you will also need to update the JSPs (specifically the 'registerApplicationFrompPopertyFile' method call), and your JSP project's appmodule property file.

  • What is the application name when CMS connects to SQL server 2005

    Hi, We are BOXI R2 SP3. We have 3 servers with CMS installed on each. We have 3 separate web servers. When I monitor sessions in SQL server 2005 then I see 6 process. 2 process are from each processing servers but the application name for 2 servers ( 4 processes) are WIndows Installer-unicode and for third server its Business Objects Enterprise.
    I think all the env should be same in a cluster so not sure how to correct this issue.
    Thanks,

    No Answer so closing this topic.

  • I do not see where to enter IP addresses in the Open VPN setup. Also, how can I set it up so that I can choose different servers in the same way as I can currently choose them with my VPN app but for PPTP?

    I think I have it working on my iPhone 5. But, I do not see how I can control the exit point that I would like for the VPN. Are all the exit points shown in the VPN setting now going to work with Open VPN, or do they remain PPTP? If I am reading correctly, they look like they remain PPTP. If I cannot control the exit point for open VPN, which exit point is the default in the profile you provided me?I note that Open VPN Connect does not work with any of the new 64 bit devices like the iPhone 5S, the iPad Air, and the new iPad MIni. Is there any chance that you guys will come up with an update for your app so that open VPN can be made to work on all iOS devices? That would be nice, particularly if the Open VPN Connect app does not give me a choice of exit points.Thanks,
    I do not see where to enter IP addresses in the Open VPN setup. Also, how can I set it up so that I can choose different servers in the same way as I can currently choose them with my VPN app but for PPTP?
    Just a quick note to tell you that Open VPN has updated their app so that it is compatible with 64 bit ARM devices like the iPhone 5S, the iPad Air, and the iPad Mini Retina.That does not resolve the problem of how to easily choose among the various possibilities for the exit server. We need to find an easy way to choose.

    Thank you for trying the new Firefox. I'm sorry that you’re unhappy with the new design.
    I understand your frustration and surprise at the removal of these features but I can't undo these changes. I'm just a support volunteer and I do not work for Mozilla. But you can send any feedback about these changes to http://input.mozilla.org/feedback. Firefox developers collect data submitted through there then present it at the weekly Firefox meeting
    I recommend you try to adjust to 29 and see if you can't make it work for you before you downgrade to a less secure and soon outdated version of Firefox.
    Here are a few suggestions for restoring the old design. I hope you’ll find one that works for you:
    *Use the [https://addons.mozilla.org/en-US/firefox/addon/classicthemerestorer/ Classic Theme Restorer] to bring back the old design. Learn more here: [[How to make the new Firefox look like the old Firefox]]
    *Use the [https://addons.mozilla.org/en-US/firefox/addon/the-addon-bar/ Add-on Bar Restored] to bring back the add-on bar. Learn more here: [[What happened to the Add-on Bar?]]

  • Can you install the Office Web Application Server on one of the App Servers for SharePoint 2013?

    Hi,
    Is it possible to run Office Web Application Server (shows preview images for docs and allows Notepad, Word, Excel to work etc) on one of the SharePoint 2013 App Servers. I don't want to have to create a new server. It talks about setting
    up a farm. 
    Better still how the feck do you switch this functionlity off - I always remember it being a pain in the arse. We accidentally ran the first part of the configuration on one of the SharePoint App Servers only to find out our subscription does not
    have this download (bar stewards changed this Nov 2014 - just after started contract).    
    Help would be much appreciated as close to go live
    Thanks.
    John.

    Hi John,
    Please reboot the server at the very beginning and test the issue again.
    Quote from you:
    Problem is I get Internet Web Page cannot display the webpage everytime I click in a excel document, powerpoint document, notebook link or the preview
    Please post the url in browser address here.
    If you just executed the command below:
    Add-WindowsFeature Web-Server,Web-Mgmt-Tools,Web-Mgmt-Console,Web-WebServer,Web-Common-Http,Web-Default-Doc,Web-Static-Content,Web-Performance,Web-Stat-Compression,Web-Dyn-Compression,Web-Security,Web-Filtering,Web-Windows-Auth,Web-App-Dev,Web-Net-Ext45,Web-Asp-Net45,Web-ISAPI-Ext,Web-ISAPI-Filter,Web-Includes,InkandHandwritingServices
    It just install some windows feature to the current server, we can find it should be done before installing several server products.
    Could you please verify if the command you executed is the same as the one above?
    You could also go to local disk and check if there is OfficeWebApps folder under C:\ProgramData\Microsoft\?
    If you check in Control Panel > Programs, is there any feature related to Office Web Apps?
    If you have confirmed there is no Office Web Apps feature installed, please go to SharePoint document library settings, and make the document to open in client, does it work?
    Regards,
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected] .
    Rebecca Tu
    TechNet Community Support

Maybe you are looking for