Allocation Management for PO

Dear Experts,
I want to know the way i will be able to find the Existance of allocation against Outstanding PO in SAP.
Regards

Dear,
I Have a Sales order XXXXX & Two Purchase orders or Production order XXXX1 & XXXX2 now I want that the Sales Order will be Fullfilled By using Both the Orders in a pre - defined ratio, Please tell me the configuration steps for that.
Regards
Samunder Singh

Similar Messages

The buffer manager failed a memory allocation call for 10485760 bytes

I have a for each loop container which executes for each row in the recordset destination.
In the for each loop container i have a dataflow task where in source is a oracle server and it performs two ookups before inserting the data into the destination.
There are around 270k records coming from source...that means and around when 38k records are inserted in the destination the packages stops its execution and it says "The buffer manager failed a memory allocation call for 10485760 bytes".
Can anyone help me in fixing this issue??
TIA

Hi Abhinav530,
According to your description, when you execute the SSIS package, you got the error message: "The buffer manager failed a memory allocation call for 10485760 bytes".
According to the error message, the machine has run out of physical memory (i.e. RAM) and is unable to swap out to hard disk. To troubleshoot the problem, please pay attention to these points:
Add more physical memory to the computer.
If you are running the SSIS package on a computer that is running an instance of SQL Server, when you run the package, set the Maximum server memory option for the SQL Server instance to a smaller value. This behavior increases available memory.
Exit applications that consume lots of memory when you run the SSIS package that contains dataflow tasks.
Run the SSIS package and the dataflow tasks in series instead of in parallel to decrease memory usage.
For more information about Data Flow Performance Features, please refer to the following document:
https://msdn.microsoft.com/en-us/library/ms141031.aspx
If you have any more questions, please feel free to ask.
Thanks,
Wendy Fu
If you have any feedback on our support, please click
here.
Wendy Fu
TechNet Community Support

Find the Manager for Group

If this isn't a good place to ask this question I applogize in adavance if you could provide a link to the correct area I should ask/post this I would appreciate it. Otherwise...
The end goal is to fill in the Managedby atribute for a lot of secuirty groups with a correct manager. I have a list of a 2100 groups and I have a data share that has like 10 petabytes of data in 3000 different directories, roughly. The point is there is
a lot. At this point I'm just trying to identify who should be the manager for group.
I'm trying to figure out the best way to approach this any and all advice/suggestions is apprecited. Even it is go pound sand, newby...hopefully not but I'll understand if it is :-)
Found
this searching
Thanks in Adavance

Fair enough...Sorry for wasteing your time, but thank you for your help
Thanks in Adavance
You are not wasting anyone's time it is just that there is no way to answer your question. These decisions are based on your organization. Scripts cannot decide who manages who. You need to get with your management and implement an org
chart. The org chart gets directly tied to groups. It starts with the org chart. Each position gets a group and the manager or exec is the owner of the group.
In most companies this may be delegated since so many managers and execs are computer illiterate. The delegate becomes the group manager and manages resource allocation through group membership.
This is Active Directory deployment 101. I recommend contacting a certified consultant to help you set this up. It is fundamental and critical. I cannot understand how you can have a large AD deployment without having a formal design document.
It probably exists but those that know it have been let go to save money. Now you are lost in limbo.
Do more research. Ask a lot of questions. Be a detective and see if you can find the original documents. If you succeed you will be a hero.
¯\_(ツ)_/¯

Admiral: Aria2 Download Manager for Midori

I recently started using Midori on this computer, and wrote my own download manager for it. It's really simple. It depends on aria2, zenity, and notify-send, which aren't hard to get at all. Its advantages over the wget.sh in the Midori FAQ is that (a) it uses aria2, which is apparently faster, (b) it lets you choose the download directory (which I like), and (c) it saves a log and notifies you in case things mess up.
#!/bin/sh
# Admiral
# Aria2 Download Manager
# USAGE: 'admiral $FILE'
test -z "$1" && exit 1
URL="$@"
FNAME=$(basename "$URL" | cut -d '?' -f 1)
echo $FNAME
LOGFILE="$HOME/.admiral-log-$$"
SAVE=$(zenity --title="Admiral: Save to:" --file-selection --filename="$FNAME" --save)
test $? -gt 0 && exit 3
asplode() {
notify-send -u critical -t 5000 -i gtk-no "Admiral Asplode!" "Download of $URL failed
Check the logfile at $LOGFILE"
exit 2
notify-send -u low -t 1500 -i gtk-save "Admiral" "Began downloading $URL"
touch $LOGFILE
aria2c -d "$(dirname $SAVE)" -o "$(basename $SAVE)" -l $LOGFILE "$URL" || asplode
notify-send -u normal -t 2000 -i gtk-ok "Admiral" "Download of $URL complete
Saved to $SAVE"
rm $LOGFILE

Good idea. Using the 'External Download Manager - CommandlLine' plugin, I set it to:
/usr/bin/my-dl {URL}
Then I created /usr/bin/my-dl which contains:
#!/bin/bash
dl_path="/media/data/inbox" # edit to match your download path and it cannot contain spaces
/usr/bin/lxterminal --title="$1" --working-directory="dl_path" --command="/usr/bin/aria2c --dir=$dl_path --file-allocation=none --continue=true $1"
Now when I click on 'save' it runs that script. Kinda lame but it works ;p
Last edited by graysky (2012-11-20 18:51:30)

Pre-allocating Extents for Instances

Using 10.2.0.4 Standard Edition RAC. I have a table very busy with inserts. Oracle waits for events "gc current block busy", "gc buffer busy release" etc. There seems contention of the blocks between instance. I pre-allocated extent to each instance:
alter table busy_table allocate extent (100m instance 1);
alter table busy_table allocate extent (100m instance 2);But this seems not reducing the events. Is there any more to do?
Some additional questions:
1) How to I know the extent is allocated to a specific instance? DBA_EXTENTS has no instance information. And X$KTFBUE always shows the current instance.
select INST_ID, KTFBUEFNO, KTFBUEBNO from X$KTFBUE
where KTFBUESEGBNO=(
select header_block from dba_segments
where segment_name='BUSY_TABLE');returned the same inforamtion except that INST_ID is different.
2) Does the preallocation affects insert sql only? I guess other operation are free to use any extent. Correct?
3) We are using ASSM. So I am not supposed to be tuning FREELISTS AND FREELIST GROUPS. Correct?
DB: 10.2.0.4
OS: RHEL 5.3

Just checked the document again ([url http://download.oracle.com/docs/cd/B19306_01/server.102/b14200/clauses001.htm#g1053419]INSTANCE integer)
If you are using automatic segment-space management, then the INSTANCE parameter of the allocate_extent_clause may not reserve the newly allocated space for the specified instance, because automatic segment-space management does not maintain rigid affinity between extents and instances.(How come I missed this??)
So Oracle ignores the instance clause for ASSM tablespace. Preparing a test with MSSM tablespace...

Questions on "FAQ - SAP Solution Manager for VARs"

Hi,
I just got through the FAQ - SAP Solution Manager for VARs, but have some further questions:
For me it is not quite clear which connections are necessary for which VAR scenrio.. currently we have setup the service desk in our solman. Customer's aren't linked to the solman yet - we have saprouter-saprouter connections. Connecting them via SAP support backbone is an interesting option, especially for incident management. To get this working we should follow note 1124718 right?
But what about the other scenarios like maintenance optimizer and ewa monitoring? I guess for that we definitly need to build up RFC connections to each relevant customer system (~300+x)?! I think it will be hard to handle so many connections - just consider if a customer is cancalling the maintenance contract, everything needs to be removed again... best would be to have a central communication point...
For MOPZ we need up-to-date system information. So everyone is talking about SLD. Do you also recommend this option? There we need again a connection (direct to SolMan SLD or via external SLD on customer side).
According to the FAQ there is a workaround for ewa monitoring for customers with security doubts.. is this also working for non-ABAP components? We need SMD and WI for generating ewas for JAVA systems...
With regards to Enterprise Support contract: ewa only need to be monitored for productive systems? Can a customer be charged if they want to have ewas monitored for other sytems too? How long do we need to keep the ewas (1 month, 3 months, half year) before they are deleted? Are there any specific requirements?
All the work to get these scenarios working.. is this covered within the Enterprise Support contract? Can the customer be charged for work thats done by the VAR in their system (e.g. RFC connections, SDCCN, SLD,...)?
Sorry for this long text.. hope you have some helpful ideas!
Regards,
Richard

Hello Richard,
(1) regarding network connections see document [Draft:Technical Support Network Connections for VAR Scenario|http://service.sap.com/~form/sapnet?_SHORTKEY=00200797470000089947&_OBJECT=011000358700000880802009E] as overview and with a lot of detailed information.
(2) yes, you have to setup once all your customer connections at the beginning but then only add/remove with customer contract changes
(3) the workaround by sending by email can handled a anexception. EWA has to be done for productive systems like nowadays done by SAP. Additional EWA services could meas additional business case for a VAR - that's contract between VAR and customer.
(4) whatever you think may be a business to sell - do it ! (and get a monetary bonus from your boss
Kind regards
Heinrich

Wants to activate batch management for a material which already had a Stock

hi,
i want to activate batch management for a material which already has a stock and open Purchasing documents.
is there any way by which we can do it without removing the same.
please help.

program name is RVBCONVMAT2BM
but i am doubtfull it will be delivered with standard SAP, you need to request you from SAP as they charge for this.
this program convert the material to batch and all relevant dependant documents will be updated with batch no.
Regards,
Pravin Mukkawar
pasting some description of the program
REPORT rvbconvmat2bm.
Report illustrates the call of function module VBZ0401_CONVERT_OBJECTS
which sets the batch management flag for one material including
depending objects. Function module VBZ0401_FILL_BUFFERS helps
improving the performance.
then logic......

How to configure Oracle Enterprise Manager for ASM RAC Database ?

Dears,,
We have two databases (Primary & Standby), each database has two instances
Database version: Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit
How to configure Oracle Enterprise Manager for this environment ?
I need documentation for this please.
Many thanks & Regards,,

Assuming an agent is running on the servers you want to monitor,
navigate to the Agent home page (Via setup --> Agent)
When in the agent home page select 'Add Database'and press [Go]
Assuming yopur database now gets recognized, select the Configure icon and enter the password for dbsnmp.
When done, press [Ok] to return to the agent home page.
Regards
Rob
http://oemgc.wordpress.com

How to configure Oracle BPEL Process Manager for JBoss 4.2.1

can any body help me to configure Oracle BPEL Process Manager for JBoss 4.2.1

Look here:
http://download.oracle.com/docs/cd/E10291_01/doc.1013/e10538/toc.htm
Marc
http://orasoa.blogspot.com

How can I re-install the OS with Deskstop Manager for Mac

I just downloaded the Deskstop manager for Mac, tried to upgrade by BB software and it gave me the JVM Error 513. Luckily I backed up all info cause I know that means the whole thing is erased. How do I on a Mac re-install the software? When I connect it to the computer it does not recognize it?

Hmm.. that is kind of weird.
I did a quick search and came up with this:
http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB13003&sliceId=SAL_Pub...
You should be able to restore software onto your BlackBerry by disconnecting and then reconnecting it. BlackBerry Desktop Manager will have show "Connecting" at the bottom of the window, and then it should eventually recognize that software needs to be releases onto it.

Is it possible to activate Batch Management for a material without Class?

Dear Experts,
Is it possible to activate Batch Management for a material without having Class & Characteristics maintained. As my requirement is to procure Fuels in Batches only with external no. assignment without any parameters to be checked at the time of Goods Receipt? Batches are needed for Accountability purpose.
Regards

>
Chandan H N wrote:
> Dear Experts,
>
> Is it possible to activate Batch Management for a material without having Class & Characteristics maintained. As my requirement is to procure Fuels in Batches only with external no. assignment without any parameters to be checked at the time of Goods Receipt? Batches are needed for Accountability purpose.
>
> Regards
Please check this answered link:
Batch-classification view
If you want classify a batch, then you should have maintained the batch classification in material master which is either class 022 or class 023 (depends on your batch level set in cusotmizing). The material class 001 has no impact on the batch classifcition, it is what it is: a classification for the material.
Edited by: Afshad Irani on Jun 20, 2010 4:40 PM

How assign a "Project Manager" for a new project?

Hello,
I need to know about the "Project Manager" in a new project.
Does the "Resource Manager" build the team and assign a "Project Manager"?

It totally depends on your organization process.
Normally PMO creates project, build team,assign resources to tasks, then while save and publish the projec assign Project manager as owner for the project plan.
If you have Resource manager in your organization then he can build the team for the project publish it then PMO or project manager can assign the resource to the task then save and publish the plan.
IF project manager has idea about resources then he can also build the team and assign resource to the task.
Note :- once PMO or resource manager build the team and publish the project then Project owner need to open the project plan add new field in the plan STATUS MANAGER and select his name for all task for which he will give the approval to the actual of the
task send by resources.
By default who ever will create project act as STATUS MANAGER for all the task.
kirtesh

Can't find Enterprise Manager for standalone OC4J 10.1.2.0.2

Hi
I downloaded standalone OC4J 10.1.2.0.2 from here so I could experiment deploying webservices to it
http://download.oracle.com/otn/java/oc4j/1012/oc4j_extended.zip
It installed successfully and I managed to start it ok. When I point my browser at it the home page displays but there does not seem to be an enterprise manager page. I have a jdeveloper 10.1.3 install and when I run the OC4J supplied with that I can navigate to an enterprise manager page and view applications and webservices.
This is the home page for the 10.1.2.0.2 install
http://img405.imageshack.us/my.php?image=oc4j101202homepagecq8.jpg
This is the homepage of the 10.1.3 install supplied with jdeveloper
http://img399.imageshack.us/my.php?image=oc4j1013homepagegb6.jpg
(click the images to see their full size)
In the 10.1.3 screenshot you can see a link to "launch application Server Control". This is missing on the 10.1.2.0.2 homepage. Should it be there for both versions?
thanks
paul
Message was edited by:
[email protected]

Hi,
Enterprise Manager for stand alone OC4J was introduced in 10.1.3. 10.12 does not have this feature
Frank

I'm installing windows 7 64-bit on my imac which I've done before but I get a message that the partition is GPT even after I format the bootcamp partition. I just upgraded my hard drive to a 3tb and I'm allocating 1tb for windows. How can I fix this?

I'm installing windows 7 64-bit on my imac which I've done before but I get a message that the partition is GPT even after I format the bootcamp partition. I just upgraded my hard drive to a 3tb and I'm allocating 1tb for windows. How can I fix this?

No easy fix for a few reasons:
1) Bootcamp requires a hybrid MBR for the partition table. That is: both an MBR and a GPT partition table at the same time with the GPT one having all partitions and the MBR one having only the ones that are relevant, but at most 4 of them (including the protective partition and the Macintosh HD one). Which leads us to:
2) The MBR part of the hybrid partition table cannot work with 3TB hard drives. MBR is limited to 2TB.
I am working on a small EFI app that can boot Windows in EFI mode on a Mac and that would mean that you can go GPT only on your system. The progress of the app is slow due to the nature of EFI and for now requires that you do an unattended Windows install with slipstreamed graphics drivers, but we are adding VGA loading on top of EFI quite soon after the rest of the app stabilises. The status of the app is documented at:
Win7 x64 booting natively via EFI (no bios emulation)
Windows does actually successfully boot in EFI mode on most Macs (anything with a 64bit EFI should work), but does not have graphics support even if you load the driver due to the VGA pci registers not being set by the firmware. Furthermore, in Setup and Safe Mode, Windows uses VGA instead of GOP which is a failure by design since VGA is a BIOS standard and not really compatible without hacks with EFI. Other EFI implementations also add VGA compatibility at a high cost to the firmware complexity for the VGA cards available on the market that don't actually contain anything in their ROM except the VGA BIOS.
My recomendations:
1) Install on a second smaller hard-drive; or
2) Wait for the EFI app to come out officially and use that to boot Windows Vista SP1 x64 and Windows 7 x64 (RTM and SP1) in the native EFI mode.
3) Wait for Windows 8 which supports VGA-less booting acording to the AMD presentation at UEFI Plugfest.

It is not possible to install LenovoEMC Storage Manager for Linux on Ubuntu 14.10

hi,
I have big problem installing LenovoEMC Storage Manager for Linux on Ubuntu 14.10 64bit.
I downloaded it from https://lenovo-na-en.custhelp.com/app/answers/detail/a_id/26108
Installed JRE (both 64 and 32 bit)
Selection Path Priority Status
0 /usr/lib/jvm/java-8-oracle/jre/bin/java 1 auto mode
* 1 /usr/lib/jvm/java-8-oracle/jre/bin/java 1 manual mode
2 /usr/local/java/jre1.8.0_25/bin/java 1 manual mode
java -version
java version "1.8.0_25"
Java(TM) SE Runtime Environment (build 1.8.0_25-b17)
Java HotSpot(TM) 64-Bit Server VM (build 25.25-b02, mixed mode)
tryed with both. but without success.
I am still getting error:
./setup-1.4.4.14439.bin
Preparing to install...
Extracting the JRE from the installer archive...
Unpacking the JRE...
Extracting the installation resources from the installer archive...
Configuring the installer for this system's environment...
Launching installer...
Graphical installers are not supported by the VM. The console mode will be used instead...
Preparing CONSOLE Mode Installation...
===============================================================================
Choose Locale...
1- Deutsch
->2- English
3- Español
4- Français
5- Italiano
6- Nederlands
7- Português (Brasil)
8- Svenska
CHOOSE LOCALE BY NUMBER: 2
=======================================================
Installer User Interface Mode Not Supported
The installer cannot run in this UI mode. To specify the interface mode, use the -i command-line option, followed by the UI mode identifier. The valid UI modes identifiers are GUI, Console, and Silent.
=======================================================
Any help?
Thanks!
Solved!
Go to Solution.

Ok , i got this baby working.. sudo is not a problem here.. you need to specify additional java parameter for installer!
./setup-1.4.4.14439.bin LAX_VM /usr/bin/java

Allocation Management for PO

Similar Messages

Maybe you are looking for