Allow directive in Vhost.xml vs. Adapter.xml - what's the difference?

Can anyone tell me the difference between the Allow directive in Vhost.xml file and the one in Adapter.xml file? The PDF on FMS says about Allow in Vhost.xml:
"This element is a comma-delimited list of domains that are allowed to connect to this virtual host. The default value is
all. If the Allow element is left empty, the only connections allowed are those coming from the same domain."
While it says the following about Adapter.xml:
"A comma-delimited list of host names, domain names, and/or full or partial IP addresses from which clients can
connect to the server."
I can't see any difference?
I'd guess one specifies domains that hosted SWFs can connect to server from, while the other specifies client-side hosts which can connect to the server.. However it is not clear to me which is which.

Its like having finer control over each of your vhosts. I mean if you create 2 vhosts - you migth want to have seperate entries for them though both vhosts might come under same adaptor. You might want only client from xyz.com to connect to vhost1 and not vhost2. I hope this little info is helpful.

Similar Messages

allow tag in Vhost.xml

I want to allow connections between applications running on
my server.
When setting <allow> tag in Vhost.xml to '12.34.56.78'
(server ip address, i don't have domain name), server allows
connections made from swf files running on the same server, but
does not allow connections from one application to another running
on the server.
Adding 'localhost' to <allow> tag does not help.
Leaving <allow> tag empty does not help also.
When setting <allow> tag to 'all', all connections are
allowed including those made from third-party servers that is not
applicible for security reasons.
What am i doing wrong?

Here it is an excerpt of the file.
The <Allow> tag is the only thing i've modified :










<Allow>www.mywiicenter.com</Allow>
I have a page, on the site specified in <Allow>, with an SWF that shows a video on demand, taken from the "media" subfolder of the VOD application.
The FMS is in a different server.
When there it was "all" in place of my site, the connection were established, and i watched the video.
Now, the swf can't connect from either my site nor from any other one (i've also tried putting the swf on a different webserver with another domain name).
The FMS administration console tells me that a connection was attempted, but it was refused (see image below):
And i've tried both with IE7 and Opera 9.
I think there's a simpler way than rewriting the VOD application , isn't it?

What is the difference between java direct or java bean in JSP?

What is the difference if I use java code directly in JSP or use java bean in JSP?
Which class to use for receiving the passed parameter from html or java script? Any difference for java code and java bean in the way receiving the passed data?
How can I pass string from jsp to html or java script?

it's generally accepted as better design to separate presentation from logic. meaning, the java code in the jsp should be used to support displaying data, as oppsoed to implementing the application - like database access, etc.
when the logic is separated from the presentation, it allows you to reuse logic components within several jsp pages.
if you decide to change the presentation layer in the future (to support wap, for example) you don't need to rewrite your entire application, since the "guts" of the application is outside of the jsps.
it is also a good idea to separate your business logic from your data layer. adding a "buffer zone" between these layers helps in the same manner as in separating presentation from logic. if you're using flat files for storage now, upgrading to a database wouldn't require rewriting all your business logic, just the methods which write out the data to a file, for example.
once you feel comfortable with separating the various layers, check out the struts framework at http://jakarta.apache.org/
to answer your second question, to get parameters passed in from HTML forms, use ServletRequet's getParameter() method.
in tomcat:
<% String lastName = request.getParameter( "lastname" ); %>
to answer your third question: when displaying the HTML from withing a jsp, print out the string to a javascript variable or a hidden form element:
<% String firstName = "mike"; %>
<input type="hidden" name="firstname" value="<%= firstName %>">
<script language="javascript1.2">
var firstName = "<%= firstName %>";
</script>
this jsp results in the following html:
<input type="hidden" name="firstname" value="mike">
<script language="javascript1.2">
var firstName = "mike";
</script>

What is the difference between a VGA adapter and an AV adapter? Which would be better for my iPad 2 if I just wanted it for games and browsing the Internet?

If I just wanted to play games and surf the web, would a VGA adapter or an AV adapter be better? For my iPad 2? I asked my family for a VGA adapter for Christmas and I'm not too sure if it's the one I want. Also, what is the difference?

HDMI Adapter

What is the Difference between AQ adpater and JMS adapter??

What is the Difference between AQ adpater and JMS adapter in BPEL11g??
In what scenarios we go for AQ and for what scenarios we go for JMS adapter???

Go for AQ when using Oracle Advanced Queueing (the database stuff).
Use JMS when using JMS (in memory of file queues)
hth,
Peter Paul

In jdbc adapter what is the difference between insert and update insert

in jdbc adapter what is the difference between insert and update insert
Edited by: katru vijay on Mar 22, 2010 7:43 AM

Please refer to this Link [Document Formats for the Receiver JDBC Adapter|http://help.sap.com/saphelp_nw04/Helpdata/EN/22/b4d13b633f7748b4d34f3191529946/frameset.htm]
Hope this helps.
Regards,
Chandravadan

What's the difference between using java directly in JSP and java bean

What is the difference if I use java code directly in JSP or use java bean in JSP?
Which class to use for receiving the passed parameter from html or java script? Any difference for java code and java bean in the way receiving the passed data?
How can I pass string from jsp to html or java script?

1 Cleaner pages
2 you have to write the class and use set and get methods
3 What do you mean when saying passing string from jsp to html??, do you mean the value you can use <%=variablename%>

What is the difference between granting privilege directly and via role

When we want create a view in user1 schema , that user must be granted by select privilege on table user2.t2 , but not via a role , what is the difference?
Is there any other privileges that must be directly granted?

please look into the scenario ,
I have a schema with a table in it. I have granted select on that table to a role.
grant select on user1.example_table to example_role;
I then grant that role to a user:
grant example_role to user2;
Then user2 wants to create a view on top of that table:
create or replace view user2.example_view as
select *
from user1.example_table;
That throws an error however:
ORA-01031: insufficient privileges
Why though? If they have select permission via the role, why can they not then create a view on that object?
I found that I had to grant the object directly to the user before it would work.
grant select on user1.example_table to user2;
why this is so,
Thanks,
uday
Edited by: udayjampani on May 16, 2012 4:42 PM

What is the Difference Between Adapter and Proxy

Hi Master,
I want to know the Difference Between Adapters and Proxies.
And when we are using proxies and Adapters....
Regards,
SReddy

Adapters are part of the Adapter Framework. Adapters provide the technical connectivity to enable the integration of SAP and non-SAP applications through XIs Integration Engine.Again, Adapters are used for connectivity from and to external systems with XI that cannot communicate via proxies.Adapters are only required in SAP systems older than 6.20 and external systems.
Systems based on 6.20or higher can communicate directly with proxies.
The literal definition of a proxy is an object / process authorized to act for another; an agent or a substitute. In simpler terms, proxies in the XI context are objects used to encapsulate the creation (from a sender system) or parsing of XML (at a receiver system) as well as the communication with the relevant runtime components required to send or receive those messages.
Proxies are generated from Message Interface in IR.
The Proxy Runtime controls these objects / processes, and can itself be controlled by the applications it communicates with. The Proxy Runtime currently has the following components available: 1. ABAP Proxy Runtime Communication using XI or Web Services a. Web Service Runtime 2. Java Proxy Runtime Communication using XI (J2EE) The objects that the Proxy Runtime then controls are created via Proxy Generation, for both ABAP and Java. In the following sections a client proxy is used by an application to send messages outside of the system it resides in (normally to the IS in this context). Conversely, a server proxy is used by an application to receive messages from sources outside itself (again, normally the IS in this context).

What is the difference between SCXI-1349 adapter and DIO-24 adapter(in SCXI-1353 assembly)

I have an SCXI 1353 cable assembly. How do I differentiate between these two adapters ?

Sasi,
Hello, the SCXI-1349 adapter is is used for connecting 68-pin MIO E Series devices to an SCXI chassis.
The SCXI 1353 (comes with two adapters) is used for connecting 100-pin MIO E Series boards to an SCXI chassis. The first adapter is identical to the SCXI-1349, while the second adapter routes the extended analog or digital signals to the SCXI digital modules or breadboarding modules.
Good luck with your application!

What's the difference between include directive & include action tag?

I no that the directive is used for including static content,
while the action is also used for dynamic content.
So the first one will include the content into the JSP only at compilation time. The second one will include the content every time you access the JSP.
*<html>*
*<body>*
*<h1> Include Action test PAge</h1>*
*<h2> Using the include directive</h2>*
*<%@ include file="included2.html"%>*
*<%@ include file="included2.jsp"%>*
*<h2> Using the include action</h2>*
*<jsp:include page="included2.html" flush="true"/>*
*<jsp:include page="included2.jsp" flush="true"/>*
*</body>*
*</html>* I tried withis code. But its giving the same result.I didn't modified the source. I modified in the included file.As I request for the JSP page I got the same result for both.
so i just want to know that is thier any way or example by which i can see the difference between these two clearly..
please help me out.
thnx.

As our almighty Google says: @include is compiletime and jsp:include is runtime.
Install Google at your machine. It's really great. It has answers on almost all questions.

What is the difference between earnings and allowances

Hi
Currently I am working as a payroll functional for Indian Legislation.What is the main difference between earnings and allowances? Is there any rule to classify any element as earning or allowance?

Earnings
Represents payments made to an employee other than perquisites and allowances.
Allowance
Represents the allowances that are paid to an employee, for example, conveyance allowance and house rent allowance.
The element creation wizards setup a lot of this stuff for you. Check out the following Oracle Support article for more information on Indian payroll setup:
Oracle Human Resources (HRMS) for India Supplement (Doc ID 297146.1)

[CS4-CS5] Table from XML: what's the best practice?

Hi,
I have to build a huge table (20-25 pages long...) from an XML file.
No problem with that, I wrote a XSLT file to convert my client's XML in the "Table/Cell structure" InDesign needs with all style parameters.
The problem is that it takes a long time (4-5 hours) to ID to build the whole table.
I wonder if this is still the best practice with such a huge amount of data (the input XML is 1,1 Mb).
I also tried to build the table using a script (JavaScript) but from some time test I can see the problem is even bigger.
I'm currently using an iMac (Mac OS X 10.6.2) with 3.06 GHZ Intel Core 2 Duo and 8 GB ram, it's not exactly the worst computer in this world...
Is there a best practice for this kind of work?
Client is becoming a pain in the arse...
Thanks in advance!

First transform the XML through XSLT seprately and then Import that XML in InDesign.
Hope it help.
Regards,
Anil Yadav

What is the difference between Mini DVI to VGA adapter and Mini DisplayPort to VGA Adapter?

My macbook is MacBook4,1. early 2008

The port itself is shaped different.....
.....here is a link to read through on the technical differences of the 2 ports....
http://en.wikipedia.org/wiki/Mini_DisplayPort
......your MacBook has the Mini-DVI port........the VGA end of the adapter is the same on both...

What is the difference between Apple Digital AV Adapter and Apple TV?

Which is better, Apple TV or Apple Digital AV Adapter?
Which one is the best devise to purchase?
Do they both accomplish the same thing?
Is one better/easier to use?
Can they/should they be used together?
Please advise!!!

Hi Min,
AS Churchhill said one is more or less a computer, that being the Apple TV. The other is simply adapter for an iPad or iphone and are designed for sharing those devices screen on larger on larger one. I've included the overview of the Digiatal Av adapter for you.
n

Allow directive in Vhost.xml vs. Adapter.xml - what's the difference?

Similar Messages

Maybe you are looking for