Alsa and pulse audio issue

I am having 2 problems.
Teamspeak 3 Mic doesn't work
Pianobar no audio.
I have a default alsa audio error for pianobar and ts3 no idea, how can I narrow down why these do not work as they should?

My sound works fine, but apps are choosing pulse and alsa, I need to get a default sound, I got confused since the config files are not where the wiki says and thought I should ask for help.
I think I need to make pulse default, just no idea how to do that and the config files seem to be missing.
edited /etc/libao.conf changed it to pulse and removed dev=default, pianobar works on my other laptop, now i have to reboot and see if it works with teamspeak and pianobar on this laptop.
with some more google searching my sound card and alsa, i found a fix for my microphone too.
i have a dell inspiron 1545 with idt audio.
things that i followed to fix my problem,
pianobar in arch wiki, but found you only need to remove dev=default and the sound works fine, and a post in the ubuntu forums since the sound card was the same the solution worked.
source
http://ubuntuforums.org/showthread.php? … st10214558
cd /etc/modprobe.d
sudo gedit alsa-base.conf
copy/paste
options snd-pcsp index=-2
alias snd-card-0 snd-hda-intel
alias sound-slot-0 snd-hda-intel
options snd-hda-intel model=dell-m4-1
options snd-hda-intel enable_msi=1
options snd-hda-intel position_fix=1 enable=yes
save and close
also i was wondering if anyone knew how to redirect pcm audio directly to pulse, for one of my games medal of honor allied assault, i have to modprobe snd-pcm-oss for sound when i log in and would like to have it run through pulse so maybe the sound would be better, the openal.so that came with the loki beta3 installer is locked to the game so using the openal from arch official doesn't work, go the sound working on this with.
installed:
mlocate
alsa-oss
lame (mp3 decoder probably not needed)
ran:
sudo updatedb
and i have gnome-session-properties set to run:
sudo modprobe snd-pcm-oss
if that fails i have alsa-oss installed so running it like so works
aoss ./mohaa
to enable the sound currently.
yes i know it is old, yes i know the project is dead and not updates, thats why i am working on solutions! lol
Last edited by fallen00sniper (2013-03-13 06:20:14)

Similar Messages

Facebook and streaming audio issues

I like using Facebook and stream audio from my favorite radio stations! However, I am running into adobe flash upgrade issues!!!! I can bring up Facebook but I can't run certain programs within it. I can bring up my favorite radio stations but won't let me stream audio!!!! Any solutions?

What exactly are your issues?
I had an issue where every image found on the blog template was showing up instead of the actual image that represented the blog post. My fix was to make sure of the following:
1. Blog image needs to be small in file size. Many bloggers post images that came straight off their camera and I found that the share tools will grab the most accessbile and light-weight files first. If the image is too big then it won't grab it at all. The share tool grabs the smallest and fastest loading, top-most in the code image first, which means the images found on the template of the blog.
This issue occurs at WordPress too, so it is not restricted to BC but rather the tools provided to share.
2. Try to avoid putting the image inbetween <p></p>'s, when I pulled mine out of the the paragraph format, they were found quicker.
3. Avoid having the image lead off the blog post list before the bodypreview, if you can at all just show the image on within post detail page if you can. I know that having an image in the list helps, but then just put the whole blog in the list, like WP does. Problem here is that most share tools on the list have a problem diciphering what to share, so it shares the whole page, giving everthing a share count. WP does this better. They isolate the independent listings and provide isolated share tools for each list.
Wait a week and the technology will change again.
Good news is that the element that Facebook offers to share a page on the web will be featuring the option to upload an image to accompanying the sharing of the post. You can see this happening at Facebook already when you drop in the link of the post into a news feed.
I hope this helps.

Adobe Flash Player - Green Screen and Jumbled Audio Issue

I currently have gotten my new PC and I watched to watch some videos online.
Some sites like youtube I seem to have no issues, but with others. The video will work till random points and then suddenly it will start to go green screen. The audio will become jumbled as if it were skipping through the reset of the video.
I have tried all types of solutions I have looked up and even tried some of the troubleshooting on the adobe flask troubleshooting list.
yet I am still unable to figure out this issue.
Build:
ASUS MAXIMUS VII FORMULA/WATCH DOGS LGA 1150 Intel Z97 HDMI SATA 6Gb/s USB 3.0 ATX Intel Motherboard
Intel Core i7-4790 Haswell Quad-Core 3.6GHz LGA 1150 84W Desktop Processor Intel HD Graphics 4600 BX80646I74790
GeForce GTX 980
G.SKILL Ripjaws Z Series 16GB (4 x 4GB) 240-Pin DDR3 SDRAM DDR3 1866 (PC3 14900) Desktop Memory Model F3-14900CL8Q-16GBZM
I think those are all the parts that you may need to know to maybe help me? I'm not sure.
I am running currently Windows 7 64 Bit as well.
Everythings up to date and is working fine so I just can't figure this out.
I am also using Google Chrome for my web browser.
I would appreciate any help in getting this fixed as it is becoming an annoyance and is the first time I have ever experienced this issue.
My old PC didn't have issues like this. =(

Please try the solution outlined in the post below and let us know how it works for you.
http://forums.adobe.com/message/4865912#4865912
Thanks,
Chris

Premiere Pro 6 and Audition Audio issues with Kona Lhi

Hello,
When I have Adobe Premiere Pro and Adobe Audition open at the same time, and I send an audio clip from Premiere Pro to Audition for editing, I have no sound in Audition. If I have only one of these programs open, the audio works fine in both. Since these programs are linked together it is essential that I have audio in both, even though, both programs are open. Is there a driver fix or some other way to get Premiere Pro to release the Kona Card LHi when switching to Audition? I am using a Mac Pro 2 x 2.4 6-core 24MB Ram 1333 DDR3 and Quadro 4000 with Kona Lhi Drivers 10.4.4 with Adobe presets.
Thanks,
Dunamis Starr | TV Department

Hello Dunamis,
Unfortunately this is a known issue with the Kona card. I know this is something they would like to fix but I'm uncertain on the timeframe.
There are times when this workflow will work without issue but when it goes into the bad state you will need to quit the apps.
Peter Garaway
Adobe
Premiere Pro

10.4.3 and M-Audio issues

Since installing 10.4.3 I cannot get Logic Express 7.1.1 to work using the M-Audio Delta 66. The drivers worked fine in 10.4.2. I get digital stuttering audio when using the driver. I have had several kernal panic issues when just launching Logic. Complete system crash. I have upgraded the driver to the new 2.04 and still no improvement. Going back to old drivers does not work either. Using built in audio works fine, but who wants that? Dual 867 MDD G4.

10.4.3 broke M-Audio drivers, that's been reported several times on different forums since last week. I think I've seen that an older version works but I can't remember which one. You might want to do a search in the Logic Pro discussions. M-Audio are probably working on a fix, your best bet is probably contacting M-Audio customer support.

Mic volume, ALSA and X-Fi issue

This is probably a driver issue but I wanted to check if anyone here has found a solution/workaround.
I have a Creative Sound Blaster X-Fi Xtreme Gamer card and it works quite well now with Alsa using the (still) recently released ctxfi driver from the AUR (on x86_64, if that makes any difference). I bought a really cheap analogue microphone a week ago just to have one around (apart from the mic of an old broken headset). When I connect it to the card and turn up the mic volume on the capture panel of alsamixer, I can hear everything through it very clearly while the control is still in the green zone. If I push it up all the way, the input is very loud and I get a lot of background noise.
The problem is that in Audacity and when using arecord, the capture volume is really low (just a whisper) (Yeah, I've selected "capture" on the mic control in alsamixer). I can get better sound if I turn up everything in alsamixer, but then I have the sound blasting in my ears while recording. From what I can tell, input and output channels are "linked" with this driver. Normally you would have one control for mic recording volume and another one for mic playback volume so that you can boost the input only. If I go to the "all" panel in alsamixer, it shows a master out and a master in slider, but adjusting one adjusts the other, etc.
Is there any workaround to this? Does anyone know what's going on with ALSA? Their site still says that they've only received the card specifications. It doesn't even mention that the drivers have finally been open-sourced.
If anyone is using OSS with an X-Fi card, do you have this issue as well? Has OSS already incorporated the open-sourced drivers?

bump

[solved] Wifi and Video /Audio issues with Yosemite upgrade

Apple support recommend you call them to solve your issue as they want to report all instances to engineering. They solved my issue (for now)
Symptoms on Macbook Pro Retina 16GB 512GB SSD - late 2013 :
1. any online audio or video stutters when playing - Youtube, Vimeo etc
2. wifi cuts out - only reconnects if I turned off/on wifi
3. Bluetooth keyboard / magic mouse disconnects
Allegedly, during the update, something can happen with users accounts freezing. Therefore, a simple fix solves the issues:
1. Shut down your Mac.
2. Start Mac holding down SHIFT key (until desktop appears) - log in with your problem user account (Safe mode for those not familiar)
3. Open Safari and navigate to Youtube - I played a video - the sound was not available but does not matter.
4. Shut down Mac
5. Start Mac in normal mode
All should be fine now. If not call Apple support - that's what they suggest

Apple support recommend you call them to solve your issue as they want to report all instances to engineering. They solved my issue (for now)
Symptoms on Macbook Pro Retina 16GB 512GB SSD - late 2013 :
1. any online audio or video stutters when playing - Youtube, Vimeo etc
2. wifi cuts out - only reconnects if I turned off/on wifi
3. Bluetooth keyboard / magic mouse disconnects
Allegedly, during the update, something can happen with users accounts freezing. Therefore, a simple fix solves the issues:
1. Shut down your Mac.
2. Start Mac holding down SHIFT key (until desktop appears) - log in with your problem user account (Safe mode for those not familiar)
3. Open Safari and navigate to Youtube - I played a video - the sound was not available but does not matter.
4. Shut down Mac
5. Start Mac in normal mode
All should be fine now. If not call Apple support - that's what they suggest

ALSA and M-Audio Fast Track Ultra problems...

Whenever I open "alsamixer" it tells me this:
This sound device does not have any playback controls.
I cannot get the sound file to play when I run this:
$ aplay /usr/share/sounds/alsa/Front_Center.wav
Any help is much appreciated.

hey thanks for the reply! i have since adjusted a few parameters and had good luck going directly into the ftu's 1/4in jack in the front. the more i use the program the more im understanding (you can see i'm relieving my neebie side!) i have not messed much with the ftu's control program itself, is this helpful when trying to get good levels and such?
how knowledgable are you about microphones? i have a garbage mic from radio shack and when trying to record my acoustic guitar with it i really need to crank up the input on the ftu and be close to the mic to get a signal. this in turn creates that "fuzzy warm" sound that you can hear before the guitar starts playing. it's that analog sound like going through an old tube-amp or something... now while the instrument is playing its not as noticeable obviously and some people even like to add this sort of effect onto digital stuff to give it that warm feeling...
my question is- what if i want just a nice crisp acoustic recording from my mic into garageband? do i go with something that uses phantompower or what? im just so lost because i don't know much about mics (except they can get REAL expensive... saw one for 7k at guitar center by me!) well sorry for ramblings! thanks in advance for help!

No sound with ALSA and/or Pulse from built-in Intel 5 Series Card

Hello,
I posted a thread about a similar problem to this 4 years ago, but that solution is no longer working for me, and I'm just now returning to Arch after floating between a few different distros, so I'm not as knowledgeable about this as I might once have been.
Basically, my problem is that sound does not work on my laptop, neither through the internal speakers or headphone jack, and neither with plain ALSA nor Pulseaudio. This leads me to believe that there is some underlying problem that once solved, will allow plain ALSA and Pulse to work properly, but that's just speculation. I've put several hours of research into this so far with no luck. Everything in alsamixer is unmuted and looks right. I'm going to dump as much relevant info on my setup below in hopes that someone more knowledgeable than I can spot the issue:
The relevant section of lspci:
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06)
Subsystem: Dell Device 0447
Flags: bus master, fast devsel, latency 0, IRQ 32
Memory at fbd00000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
The output of aplay -l
card 0: MID [HDA Intel MID], device 0: 92HD81B1X5 Analog [92HD81B1X5 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: MID [HDA Intel MID], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
The output of aplay -L
null
Discard all samples (playback) or generate zero samples (capture)
pulse
PulseAudio Sound Server
default:CARD=MID
HDA Intel MID, 92HD81B1X5 Analog
Default Audio Device
sysdefault:CARD=MID
HDA Intel MID, 92HD81B1X5 Analog
Default Audio Device
front:CARD=MID,DEV=0
HDA Intel MID, 92HD81B1X5 Analog
Front speakers
surround21:CARD=MID,DEV=0
HDA Intel MID, 92HD81B1X5 Analog
2.1 Surround output to Front and Subwoofer speakers
surround40:CARD=MID,DEV=0
HDA Intel MID, 92HD81B1X5 Analog
4.0 Surround output to Front and Rear speakers
surround41:CARD=MID,DEV=0
HDA Intel MID, 92HD81B1X5 Analog
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=MID,DEV=0
HDA Intel MID, 92HD81B1X5 Analog
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=MID,DEV=0
HDA Intel MID, 92HD81B1X5 Analog
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=MID,DEV=0
HDA Intel MID, 92HD81B1X5 Analog
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
hdmi:CARD=MID,DEV=0
HDA Intel MID, HDMI 0
HDMI Audio Output
The contents of /proc/asound/cards
0 [MID ]: HDA-Intel - HDA Intel MID
HDA Intel MID at 0xfbd00000 irq 32
The contents of /proc/asound/devices
2: [ 0] : control
3: [ 0- 0]: digital audio playback
4: [ 0- 0]: digital audio capture
5: [ 0- 3]: digital audio playback
6: [ 0- 0]: hardware dependent
7: [ 0- 3]: hardware dependent
33: : timer
/etc/asound.conf is empty and my user has no .asoundrc file in its home directory.
I ran the ALSA Information Script and the results of that can be found here.
Any help would be greatly appreciated; this is a very frustrating issue. Thank you very much!

same problem with me on Intel Corporation 7 Series/C210 Series.
actually, internal speakers works, it's just on mute (you can change it with alsamixer), but headphone/external speakers doesn't work. and there's no sound card detected in gnome control center -> audio section.
"00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)"

Audio issues with ASUS G750JX

Hey Arch,
I'm having a bit of trouble with my audio and was hoping you guys could assist me with it/simplify it.
Incase no one reads all the way to the bottom, basically I'm wondering if theres a way of just using one audio system and not having to worry about the other.
Volume levels won't save no matter what I've tried so far, plus everytime the laptop gets turned on, the headphones level which controls speakers is set to 0
"HDA Intel PCH (Alsa mixer)" "Headphone" controls Bass, "Speaker" controls speakers, "PCM" controls something else as sound gets quieter when it's lowered.
If I plug headphones in, everything gets muted, although after unmuting audio is played through the headphones, however when the headphones are unpluged, the audio mutes again until I manually unmute each stream.
I'm unsure which programs use which audio system, be it Alsa mixer or PulseAudio
Gmusicbrowser - audio is controlled both by itself and by Alsa/Pulse it seems
Vlc - similar but seems to match what both Alsa and Pulse show
I've tried setting them to just use one audio system but it doesnt seem to work.
Below are what come up in the xfce4-mixer
HDA Intel PCH (Alsa mixer)*
HDA NVidia (Alsa mixer)
Playback: GK106 HDMI Audio Controller Digitial Stereo (HDMI) (PulseAudio Mixer)
Playback: Built-in Audio Analog Stereo (PulseAudio Mixer)*
*Both seem to control audio, "HDA Intel PCH (Alsa mixer)" master "somewhat mirrors" what "Playback: Built-in Audio Analog Stereo (PulseAudio Mixer)" does. Eg "Master" is lowered in "HDA Intel PCH (Alsa mixer)" it gets lowered in "Playback: Built-in Audio Analog Stereo (PulseAudio Mixer)" but doesnt exactly match it
$lspci |grep Audio
00:1b.0 Audio device: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller (rev 05)
01:00.1 Audio device: NVIDIA Corporation GK106 HDMI Audio Controller (rev a1)
The following are packages installed relating to Alsa or Pulseaudio
multilib/lib32-libpulse
multilib/lib32-alsa-lib
extra/libao
extra/libcanberra-pulse
extra/libpulse
extra/pulseaudio
extra/pulseaudio-alsa
extra/alsa-lib
extra/alsa-plugins
extra/alsa-utils
extra/zita-alsa-pcmi
*multilib packages are primarily due to having skype (don't think I've installed anything else from multilib)
I'm set to get updates from testing and community-testing
Side note - if anyone knows how to get the XF86Backlight keys working (for the actual backlight) that would be cool, currently i control the backlight with the xfce4 power manager plugin.
Thanks to who ever is able to help.

Oh man, this is driving me nuts. First I was having the loud "pop" in the speakers, apparently the sound subsystem going to sleep to save power, heavily discussed in these forums. I applied the 10.4.10v1.1 update and these loud "pops" seemed to have gone away, but what still remains is a soft "scratch" sound before and after almost every time the computer makes sound. Includes interface sounds in the finder, quicktime movies, almost everything. It seems to only happen on my line out, and the loudness of the "scratches" is constant regardless of the mac's volume setting.
I am mostly making music with this thing, so the scratches coming out of my studio monitor speakers is very annoying. Any idea, any workarounds, please help.

Mavericks 10.9.1 Upgrade = Audio issue (lost 5.1 through HDMI)

Hello guys and gals,
I've Macbook pro 15" retina connected as follow
Macbook Pro -> Sony HT -> LG LED TV (55LA7400)
The connection is made via HDMI port. Everything was working fine, no issue when I was using previous OS. Apps such as XBMC, etc was able to output 5.1 fine.
I just upgraded to 10.9.1 and experience Audio issue.
With TV OFF: I was able to see the 5.1 Selection via Audio Midi Setup. Using the built in test feature, was able to check all 6 speakers fine.
However, as soon as I turn on the TV, Macbook screen flickers (as usual when ie tries to recognize the TV and enable Video out) I can only select 2CH via the setup.
This apparently, wasn't the issue prior to the upgrade.
Please advise,
Thanks

I should have said - I tried that earlier but I just get:
'This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled.'
My 17 inch Macbook Pro is pretty old (2009) and I took it over from my son 3 years ago so I wasn't involved with the initial installation.
Thanks.

More Audio issues...

Along with the sounds / tones truncating / cutting off, I was listening to some mp3's today and the sound was constantly cutting in and out of stereo mode. Left ear worked most of the time, right ear worked maybe 1/4th of the time. Whatever happened to the sound coding in the latest update, it needs to be fixed.
Post relates to: Pre p100eww (Sprint)

I have searched in vain for an answer to this
problem. I have a 15" Powerbook Aluminum, 1.5 Ghz G4
w/ 1.25G RAM and 10 GB available on the harddrive.
I am working with iMovie 6 with all my movie files on
a LaCie external drive connected using a FW800
connection. 195GB capacity, with about 20GB being
used up with iMovie files.
Here's my issue. When I import video alone into a
project, we have joy. When I try to add audio clips
(either AIFF or MP3), the playback slows to a crawl,
the video is severely stuttery and the audio is
distorted and plays at about half speed (like playing
a 33rpm LP at 16rpm).
If I delete the video and import the audio clips,
same issue w/slowness and distortion.
If I import the audioc clips singly, they play and
sync well with the video to a point, but there's a
threshhold at which the playback begins to degrade
and the audio issues return.
Very frustrating. Who can point me to some likely
culprits? Of, and this began happening in iMovie 5. I
was hoping iMovie 6 would solve. no joy.
Thanks all - Joel
OK - here's an update. I dumped my caches, fixed permissions, made changes to QT settings and reset the MIDI settings and the result? The audio is now running fine BUT the video is now not running (or at least ex-treme-ly sl-ooooooow-ly).
Any thoughts folks? I'd be eager to hear your input!

Audio Issues Upon Importing - the more I have, the slower they play

I have searched in vain for an answer to this problem. I have a 15" Powerbook Aluminum, 1.5 Ghz G4 w/ 1.25G RAM and 10 GB available on the harddrive.
I am working with iMovie 6 with all my movie files on a LaCie external drive connected using a FW800 connection. 195GB capacity, with about 20GB being used up with iMovie files.
Here's my issue. When I import video alone into a project, we have joy. When I try to add audio clips (either AIFF or MP3), the playback slows to a crawl, the video is severely stuttery and the audio is distorted and plays at about half speed (like playing a 33rpm LP at 16rpm).
If I delete the video and import the audio clips, same issue w/slowness and distortion.
If I import the audioc clips singly, they play and sync well with the video to a point, but there's a threshhold at which the playback begins to degrade and the audio issues return.
Very frustrating. Who can point me to some likely culprits? Of, and this began happening in iMovie 5. I was hoping iMovie 6 would solve. no joy.
Thanks all - Joel

I have searched in vain for an answer to this
problem. I have a 15" Powerbook Aluminum, 1.5 Ghz G4
w/ 1.25G RAM and 10 GB available on the harddrive.
I am working with iMovie 6 with all my movie files on
a LaCie external drive connected using a FW800
connection. 195GB capacity, with about 20GB being
used up with iMovie files.
Here's my issue. When I import video alone into a
project, we have joy. When I try to add audio clips
(either AIFF or MP3), the playback slows to a crawl,
the video is severely stuttery and the audio is
distorted and plays at about half speed (like playing
a 33rpm LP at 16rpm).
If I delete the video and import the audio clips,
same issue w/slowness and distortion.
If I import the audioc clips singly, they play and
sync well with the video to a point, but there's a
threshhold at which the playback begins to degrade
and the audio issues return.
Very frustrating. Who can point me to some likely
culprits? Of, and this began happening in iMovie 5. I
was hoping iMovie 6 would solve. no joy.
Thanks all - Joel
OK - here's an update. I dumped my caches, fixed permissions, made changes to QT settings and reset the MIDI settings and the result? The audio is now running fine BUT the video is now not running (or at least ex-treme-ly sl-ooooooow-ly).
Any thoughts folks? I'd be eager to hear your input!

[Solved] Can't Start Pulse Audio and No Sound/Volume Controls

Ok, I booted my PC this morning to find I have no sound controls in Gnome Shell after an update yesterday or sound, I have to use alsamixer to unmute, so I am getting sound but no way to control it. I tried killing pulseaudio and restarting but I keep getting the same error:
pulseaudio -k:
E: [pulseaudio] main.c: Failed to kill daemon: No such process
pulseaudio --start:
E: [pulseaudio] main.c: Daemon startup failed.
start-pulseaudio-x11:
Connection failure: Connection refused
pa_context_connect() failed: Connection refused
This is the output of pulseaudio -v:
I: [pulseaudio] main.c: setrlimit(RLIMIT_NICE, (31, 31)) failed: Operation not permitted
I: [pulseaudio] core-util.c: Successfully gained nice level -11.
I: [pulseaudio] main.c: This is PulseAudio 6.0
I: [pulseaudio] main.c: Page size is 4096 bytes
I: [pulseaudio] main.c: Machine ID is 74ef4413bd254c10a2eee6b69deab3c7.
I: [pulseaudio] main.c: Session ID is c2.
I: [pulseaudio] main.c: Using runtime directory /run/user/1000/pulse.
I: [pulseaudio] main.c: Using state directory /home/dobbie/.config/pulse.
I: [pulseaudio] main.c: Using modules directory /usr/lib/pulse-6.0/modules.
I: [pulseaudio] main.c: Running in system mode: no
I: [pulseaudio] main.c: Fresh high-resolution timers available! Bon appetit!
I: [pulseaudio] cpu-x86.c: CPU flags: CMOV MMX SSE SSE2 SSE3 SSSE3 SSE4_1 SSE4_2
I: [pulseaudio] svolume_mmx.c: Initialising MMX optimized volume functions.
I: [pulseaudio] remap_mmx.c: Initialising MMX optimized remappers.
I: [pulseaudio] svolume_sse.c: Initialising SSE2 optimized volume functions.
I: [pulseaudio] remap_sse.c: Initialising SSE2 optimized remappers.
I: [pulseaudio] sconv_sse.c: Initialising SSE2 optimized conversions.
I: [pulseaudio] svolume_orc.c: Initialising ORC optimized volume functions.
I: [pulseaudio] module-device-restore.c: Successfully opened database file '/home/dobbie/.config/pulse/74ef4413bd254c10a2eee6b69deab3c7-device-volumes'.
I: [pulseaudio] module.c: Loaded "module-device-restore" (index: #0; argument: "").
I: [pulseaudio] module-stream-restore.c: Successfully opened database file '/home/dobbie/.config/pulse/74ef4413bd254c10a2eee6b69deab3c7-stream-volumes'.
I: [pulseaudio] module.c: Loaded "module-stream-restore" (index: #1; argument: "").
I: [pulseaudio] module-card-restore.c: Successfully opened database file '/home/dobbie/.config/pulse/74ef4413bd254c10a2eee6b69deab3c7-card-database'.
I: [pulseaudio] module.c: Loaded "module-card-restore" (index: #2; argument: "").
I: [pulseaudio] module.c: Loaded "module-augment-properties" (index: #3; argument: "").
I: [pulseaudio] module.c: Loaded "module-switch-on-port-available" (index: #4; argument: "").
I: [pulseaudio] (alsa-lib)utils.c: could not open configuration file /usr/share/alsa/ucm/HD-Audio Generic/HD-Audio Generic.conf
I: [pulseaudio] (alsa-lib)parser.c: error: could not parse configuration for card HD-Audio Generic
I: [pulseaudio] (alsa-lib)main.c: error: failed to import HD-Audio Generic use case configuration -2
I: [pulseaudio] alsa-ucm.c: UCM not available for card HD-Audio Generic
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0c' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hw:1: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0c' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device front:1: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0c' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hw:1: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D1c' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device iec958:1: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hw:1: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device front:1: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hw:1: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device surround21:1: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device surround40:1: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device surround41:1: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device surround50:1: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device surround51:1: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device surround71:1: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D1p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device iec958:1: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM a52:1
I: [pulseaudio] alsa-util.c: Error opening PCM device a52:1: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM a52:1
I: [pulseaudio] alsa-util.c: Error opening PCM device a52:1: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dca:1
I: [pulseaudio] alsa-util.c: Error opening PCM device dca:1: No such file or directory
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:hdmi:1: Invalid argument
I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:hdmi:1: Invalid argument
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:1
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:1: No such file or directory
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,1
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,1: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,1
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,1: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,1
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,1: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:1,1
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:1,1: No such file or directory
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,2
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,2: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,2
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,2: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,2
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,2: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:1,2
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:1,2: No such file or directory
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,3
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,3: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,3
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,3: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,3
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,3: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:1,3
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:1,3: No such file or directory
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,4
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,4: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,4
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,4: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,4
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,4: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:1,4
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:1,4: No such file or directory
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,5
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,5: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,5
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,5: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,5
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,5: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:1,5
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:1,5: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D12p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:1,6: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D12p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:1,6: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D12p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:1,6: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:1,6
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:1,6: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D13p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:1,7: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D13p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:1,7: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D13p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:1,7: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:1,7
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:1,7: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0c' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hw:1: No such file or directory
I: [pulseaudio] module-card-restore.c: Restoring port latency offsets for card alsa_card.pci-0000_01_00.1.
I: [pulseaudio] card.c: Created 0 "alsa_card.pci-0000_01_00.1"
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
I: [pulseaudio] alsa-util.c: Trying to disable ALSA period wakeups, using timers only
I: [pulseaudio] alsa-util.c: ALSA period wakeups disabled
I: [pulseaudio] alsa-sink.c: Successfully opened device hdmi:1.
I: [pulseaudio] alsa-sink.c: Selected mapping 'Digital Stereo (HDMI)' (hdmi-stereo).
I: [pulseaudio] alsa-sink.c: Successfully enabled mmap() mode.
I: [pulseaudio] alsa-sink.c: Successfully enabled timer-based scheduling mode.
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
I: [pulseaudio] sink.c: Created sink 0 "alsa_output.pci-0000_01_00.1.hdmi-stereo" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
I: [pulseaudio] sink.c: alsa.resolution_bits = "16"
I: [pulseaudio] sink.c: device.api = "alsa"
I: [pulseaudio] sink.c: device.class = "sound"
I: [pulseaudio] sink.c: alsa.class = "generic"
I: [pulseaudio] sink.c: alsa.subclass = "generic-mix"
I: [pulseaudio] sink.c: alsa.name = "HDMI 0"
I: [pulseaudio] sink.c: alsa.id = "HDMI 0"
I: [pulseaudio] sink.c: alsa.subdevice = "0"
I: [pulseaudio] sink.c: alsa.subdevice_name = "subdevice #0"
I: [pulseaudio] sink.c: alsa.device = "3"
I: [pulseaudio] sink.c: alsa.card = "1"
I: [pulseaudio] sink.c: alsa.card_name = "HD-Audio Generic"
I: [pulseaudio] sink.c: alsa.long_card_name = "HD-Audio Generic at 0xfbf9c000 irq 28"
I: [pulseaudio] sink.c: alsa.driver_name = "snd_hda_intel"
I: [pulseaudio] sink.c: device.bus_path = "pci-0000:01:00.1"
I: [pulseaudio] sink.c: sysfs.path = "/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1"
I: [pulseaudio] sink.c: device.bus = "pci"
I: [pulseaudio] sink.c: device.vendor.id = "1002"
I: [pulseaudio] sink.c: device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
I: [pulseaudio] sink.c: device.product.id = "aac0"
I: [pulseaudio] sink.c: device.string = "hdmi:1"
I: [pulseaudio] sink.c: device.buffering.buffer_size = "352768"
I: [pulseaudio] sink.c: device.buffering.fragment_size = "176384"
I: [pulseaudio] sink.c: device.access_mode = "mmap+timer"
I: [pulseaudio] sink.c: device.profile.name = "hdmi-stereo"
I: [pulseaudio] sink.c: device.profile.description = "Digital Stereo (HDMI)"
I: [pulseaudio] sink.c: device.description = "HD-Audio Generic Digital Stereo (HDMI)"
I: [pulseaudio] sink.c: alsa.mixer_name = "ATI R6xx HDMI"
I: [pulseaudio] sink.c: alsa.components = "HDA:1002aa01,00aa0100,00100500"
I: [pulseaudio] sink.c: module-udev-detect.discovered = "1"
I: [pulseaudio] sink.c: device.icon_name = "audio-card-pci"
I: [pulseaudio] source.c: Created source 0 "alsa_output.pci-0000_01_00.1.hdmi-stereo.monitor" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
I: [pulseaudio] source.c: device.description = "Monitor of HD-Audio Generic Digital Stereo (HDMI)"
I: [pulseaudio] source.c: device.class = "monitor"
I: [pulseaudio] source.c: alsa.card = "1"
I: [pulseaudio] source.c: alsa.card_name = "HD-Audio Generic"
I: [pulseaudio] source.c: alsa.long_card_name = "HD-Audio Generic at 0xfbf9c000 irq 28"
I: [pulseaudio] source.c: alsa.driver_name = "snd_hda_intel"
I: [pulseaudio] source.c: device.bus_path = "pci-0000:01:00.1"
I: [pulseaudio] source.c: sysfs.path = "/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1"
I: [pulseaudio] source.c: device.bus = "pci"
I: [pulseaudio] source.c: device.vendor.id = "1002"
I: [pulseaudio] source.c: device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
I: [pulseaudio] source.c: device.product.id = "aac0"
I: [pulseaudio] source.c: device.string = "1"
I: [pulseaudio] source.c: module-udev-detect.discovered = "1"
I: [pulseaudio] source.c: device.icon_name = "audio-card-pci"
I: [pulseaudio] alsa-sink.c: Using 2.0 fragments of size 176384 bytes (999.91ms), buffer size is 352768 bytes (1999.82ms)
I: [pulseaudio] alsa-sink.c: Time scheduling watermark is 20.00ms
I: [pulseaudio] alsa-sink.c: Driver does not support hardware volume control, falling back to software volume control.
I: [pulseaudio] alsa-sink.c: Driver does not support hardware mute control, falling back to software mute control.
I: [alsa-sink-HDMI 0] core-util.c: Successfully enabled SCHED_RR scheduling for thread, with priority 5.
I: [alsa-sink-HDMI 0] alsa-sink.c: Starting playback.
I: [pulseaudio] module.c: Loaded "module-alsa-card" (index: #6; argument: "device_id="1" name="pci-0000_01_00.1" card_name="alsa_card.pci-0000_01_00.1" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes card_properties="module-udev-detect.discovered=1"").
I: [pulseaudio] module-udev-detect.c: Card /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1 (alsa_card.pci-0000_01_00.1) module loaded.
I: [pulseaudio] (alsa-lib)utils.c: could not open configuration file /usr/share/alsa/ucm/USB Camera-B4.09.24.1/USB Camera-B4.09.24.1.conf
I: [pulseaudio] (alsa-lib)parser.c: error: could not parse configuration for card USB Camera-B4.09.24.1
I: [pulseaudio] (alsa-lib)main.c: error: failed to import USB Camera-B4.09.24.1 use case configuration -2
I: [pulseaudio] alsa-ucm.c: UCM not available for card USB Camera-B4.09.24.1
I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:hw:2: Invalid argument
I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:front:2: Invalid argument
I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:hw:2: Invalid argument
I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:iec958:2: Invalid argument
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hw:2: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device front:2: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hw:2: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device surround21:2: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device surround40:2: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device surround41:2: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device surround50:2: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device surround51:2: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device surround71:2: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device iec958:2: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM a52:2
I: [pulseaudio] alsa-util.c: Error opening PCM device a52:2: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM a52:2
I: [pulseaudio] alsa-util.c: Error opening PCM device a52:2: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dca:2
I: [pulseaudio] alsa-util.c: Error opening PCM device dca:2: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.0:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.0:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.0:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:2
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:2: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.1:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,1
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,1: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.1:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,1
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,1: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.1:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,1
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,1: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:2,1
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:2,1: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.2:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,2
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,2: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.2:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,2
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,2: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.2:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,2
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,2: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:2,2
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:2,2: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.3:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,3
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,3: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.3:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,3
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,3: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.3:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,3
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,3: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:2,3
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:2,3: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.4:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,4
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,4: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.4:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,4
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,4: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.4:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,4
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,4: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:2,4
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:2,4: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.5:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,5
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,5: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.5:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,5
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,5: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.5:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,5
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,5: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:2,5
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:2,5: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.6:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,6
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,6: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.6:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,6
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,6: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.6:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,6
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,6: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:2,6
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:2,6: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.7:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,7
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,7: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.7:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,7
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,7: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.7:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,7
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,7: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:2,7
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:2,7: No such file or directory
I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
I: [pulseaudio] alsa-util.c: Device hw:2 doesn't support 44100 Hz, changed to 16000 Hz.
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hw:2: No such file or directory
I: [pulseaudio] module-card-restore.c: Restoring port latency offsets for card alsa_card.usb-OmniVision_Technologies__Inc._USB_Camera-B4.09.24.1-01-CameraB409241.
I: [pulseaudio] card.c: Created 1 "alsa_card.usb-OmniVision_Technologies__Inc._USB_Camera-B4.09.24.1-01-CameraB409241"
I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
I: [pulseaudio] alsa-util.c: Device hw:2 doesn't support 44100 Hz, changed to 16000 Hz.
I: [pulseaudio] alsa-source.c: Successfully opened device hw:2.
I: [pulseaudio] alsa-source.c: Selected mapping 'Multichannel' (multichannel).
I: [pulseaudio] alsa-source.c: Cannot enable timer-based scheduling, falling back to sound IRQ scheduling.
I: [pulseaudio] alsa-source.c: Successfully enabled mmap() mode.
W: [pulseaudio] alsa-util.c: Unable to load mixer: Invalid argument
I: [pulseaudio] alsa-source.c: Failed to find a working mixer device.
I: [pulseaudio] source.c: Created source 1 "alsa_input.usb-OmniVision_Technologies__Inc._USB_Camera-B4.09.24.1-01-CameraB409241.multichannel" with sample spec s16le 4ch 16000Hz and channel map front-left,front-right,rear-left,rear-right
I: [pulseaudio] source.c: alsa.resolution_bits = "16"
I: [pulseaudio] source.c: device.api = "alsa"
I: [pulseaudio] source.c: device.class = "sound"
I: [pulseaudio] source.c: alsa.class = "generic"
I: [pulseaudio] source.c: alsa.subclass = "generic-mix"
I: [pulseaudio] source.c: alsa.name = "USB Audio"
I: [pulseaudio] source.c: alsa.id = "USB Audio"
I: [pulseaudio] source.c: alsa.subdevice = "0"
I: [pulseaudio] source.c: alsa.subdevice_name = "subdevice #0"
I: [pulseaudio] source.c: alsa.device = "0"
I: [pulseaudio] source.c: alsa.card = "2"
I: [pulseaudio] source.c: alsa.card_name = "USB Camera-B4.09.24.1"
I: [pulseaudio] source.c: alsa.long_card_name = "OmniVision Technologies, Inc. USB Camera-B4.09.24.1 at usb-0000:00:1d.0-1.2, hi"
I: [pulseaudio] source.c: alsa.driver_name = "snd_usb_audio"
I: [pulseaudio] source.c: device.bus_path = "pci-0000:00:1d.0-usb-0:1.2:1.1"
I: [pulseaudio] source.c: sysfs.path = "/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.1/sound/card2"
I: [pulseaudio] source.c: udev.id = "usb-OmniVision_Technologies__Inc._USB_Camera-B4.09.24.1-01-CameraB409241"
I: [pulseaudio] source.c: device.bus = "usb"
I: [pulseaudio] source.c: device.vendor.id = "1415"
I: [pulseaudio] source.c: device.vendor.name = "Nam Tai E&E Products Ltd. or OmniVision Technologies, Inc."
I: [pulseaudio] source.c: device.product.id = "2000"
I: [pulseaudio] source.c: device.product.name = "Sony Playstation Eye"
I: [pulseaudio] source.c: device.serial = "OmniVision_Technologies__Inc._USB_Camera-B4.09.24.1"
I: [pulseaudio] source.c: device.string = "hw:2"
I: [pulseaudio] source.c: device.buffering.buffer_size = "12792"
I: [pulseaudio] source.c: device.buffering.fragment_size = "3192"
I: [pulseaudio] source.c: device.access_mode = "mmap"
I: [pulseaudio] source.c: device.profile.name = "multichannel"
I: [pulseaudio] source.c: device.profile.description = "Multichannel"
I: [pulseaudio] source.c: device.description = "Sony Playstation Eye Multichannel"
I: [pulseaudio] source.c: module-udev-detect.discovered = "1"
I: [pulseaudio] source.c: device.icon_name = "audio-card-usb"
I: [pulseaudio] alsa-source.c: Using 4.0 fragments of size 3192 bytes (24.94ms), buffer size is 12792 bytes (99.94ms)
I: [alsa-source-USB Audio] core-util.c: Successfully enabled SCHED_RR scheduling for thread, with priority 5.
I: [alsa-source-USB Audio] alsa-source.c: Starting capture.
I: [pulseaudio] module.c: Loaded "module-alsa-card" (index: #7; argument: "device_id="2" name="usb-OmniVision_Technologies__Inc._USB_Camera-B4.09.24.1-01-CameraB409241" card_name="alsa_card.usb-OmniVision_Technologies__Inc._USB_Camera-B4.09.24.1-01-CameraB409241" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes card_properties="module-udev-detect.discovered=1"").
I: [pulseaudio] module-udev-detect.c: Card /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.1/sound/card2 (alsa_card.usb-OmniVision_Technologies__Inc._USB_Camera-B4.09.24.1-01-CameraB409241) module loaded.
I: [pulseaudio] module-udev-detect.c: Found 3 cards.
I: [pulseaudio] module.c: Loaded "module-udev-detect" (index: #5; argument: "").
I: [pulseaudio] module.c: Loaded "module-esound-protocol-unix" (index: #8; argument: "").
I: [pulseaudio] module.c: Loaded "module-native-protocol-unix" (index: #9; argument: "").
I: [pulseaudio] module.c: Loaded "module-default-device-restore" (index: #10; argument: "").
I: [pulseaudio] module.c: Loaded "module-rescue-streams" (index: #11; argument: "").
I: [pulseaudio] module.c: Loaded "module-always-sink" (index: #12; argument: "").
I: [pulseaudio] module.c: Loaded "module-intended-roles" (index: #13; argument: "").
I: [pulseaudio] module.c: Loaded "module-suspend-on-idle" (index: #14; argument: "").
I: [pulseaudio] module.c: Loaded "module-console-kit" (index: #15; argument: "").
I: [pulseaudio] client.c: Created 0 "Login Session c2"
I: [pulseaudio] module.c: Loaded "module-systemd-login" (index: #16; argument: "").
I: [pulseaudio] module.c: Loaded "module-position-event-sounds" (index: #17; argument: "").
I: [pulseaudio] module.c: Loaded "module-role-cork" (index: #18; argument: "").
I: [pulseaudio] module.c: Loaded "module-filter-heuristics" (index: #19; argument: "").
I: [pulseaudio] module.c: Loaded "module-filter-apply" (index: #20; argument: "").
E: [pulseaudio] ltdl-bind-now.c: Failed to open module module-equalizer-sink.so: module-equalizer-sink.so: cannot open shared object file: No such file or directory
E: [pulseaudio] module.c: Failed to open module "module-equalizer-sink".
E: [pulseaudio] main.c: Module load failed.
E: [pulseaudio] main.c: Failed to initialize daemon.
I: [pulseaudio] module.c: Unloading "module-filter-apply" (index: #20).
I: [pulseaudio] module.c: Unloaded "module-filter-apply" (index: #20).
I: [pulseaudio] module.c: Unloading "module-filter-heuristics" (index: #19).
I: [pulseaudio] module.c: Unloaded "module-filter-heuristics" (index: #19).
I: [pulseaudio] module.c: Unloading "module-role-cork" (index: #18).
I: [pulseaudio] module.c: Unloaded "module-role-cork" (index: #18).
I: [pulseaudio] module.c: Unloading "module-position-event-sounds" (index: #17).
I: [pulseaudio] module.c: Unloaded "module-position-event-sounds" (index: #17).
I: [pulseaudio] module.c: Unloading "module-systemd-login" (index: #16).
I: [pulseaudio] client.c: Freed 0 "Login Session c2"
I: [pulseaudio] module.c: Unloaded "module-systemd-login" (index: #16).
I: [pulseaudio] module.c: Unloading "module-console-kit" (index: #15).
I: [pulseaudio] module.c: Unloaded "module-console-kit" (index: #15).
I: [pulseaudio] module.c: Unloading "module-suspend-on-idle" (index: #14).
I: [pulseaudio] module.c: Unloaded "module-suspend-on-idle" (index: #14).
I: [pulseaudio] module.c: Unloading "module-intended-roles" (index: #13).
I: [pulseaudio] module.c: Unloaded "module-intended-roles" (index: #13).
I: [pulseaudio] module.c: Unloading "module-always-sink" (index: #12).
I: [pulseaudio] module.c: Unloaded "module-always-sink" (index: #12).
I: [pulseaudio] module.c: Unloading "module-rescue-streams" (index: #11).
I: [pulseaudio] module.c: Unloaded "module-rescue-streams" (index: #11).
I: [pulseaudio] module.c: Unloading "module-default-device-restore" (index: #10).
I: [pulseaudio] module.c: Unloaded "module-default-device-restore" (index: #10).
I: [pulseaudio] module.c: Unloading "module-native-protocol-unix" (index: #9).
I: [pulseaudio] module.c: Unloaded "module-native-protocol-unix" (index: #9).
I: [pulseaudio] module.c: Unloading "module-esound-protocol-unix" (index: #8).
I: [pulseaudio] module.c: Unloaded "module-esound-protocol-unix" (index: #8).
I: [pulseaudio] module.c: Unloading "module-alsa-card" (index: #7).
I: [pulseaudio] source.c: Freeing source 1 "alsa_input.usb-OmniVision_Technologies__Inc._USB_Camera-B4.09.24.1-01-CameraB409241.multichannel"
I: [pulseaudio] card.c: Freed 1 "alsa_card.usb-OmniVision_Technologies__Inc._USB_Camera-B4.09.24.1-01-CameraB409241"
I: [pulseaudio] module.c: Unloaded "module-alsa-card" (index: #7).
I: [pulseaudio] module.c: Unloading "module-alsa-card" (index: #6).
I: [pulseaudio] sink.c: Freeing sink 0 "alsa_output.pci-0000_01_00.1.hdmi-stereo"
I: [pulseaudio] source.c: Freeing source 0 "alsa_output.pci-0000_01_00.1.hdmi-stereo.monitor"
I: [pulseaudio] card.c: Freed 0 "alsa_card.pci-0000_01_00.1"
I: [pulseaudio] module.c: Unloaded "module-alsa-card" (index: #6).
I: [pulseaudio] module.c: Unloading "module-udev-detect" (index: #5).
I: [pulseaudio] module.c: Unloaded "module-udev-detect" (index: #5).
I: [pulseaudio] module.c: Unloading "module-switch-on-port-available" (index: #4).
I: [pulseaudio] module.c: Unloaded "module-switch-on-port-available" (index: #4).
I: [pulseaudio] module.c: Unloading "module-augment-properties" (index: #3).
I: [pulseaudio] module.c: Unloaded "module-augment-properties" (index: #3).
I: [pulseaudio] module.c: Unloading "module-card-restore" (index: #2).
I: [pulseaudio] module.c: Unloaded "module-card-restore" (index: #2).
I: [pulseaudio] module.c: Unloading "module-stream-restore" (index: #1).
I: [pulseaudio] module.c: Unloaded "module-stream-restore" (index: #1).
I: [pulseaudio] module.c: Unloading "module-device-restore" (index: #0).
I: [pulseaudio] module.c: Unloaded "module-device-restore" (index: #0).
I: [pulseaudio] main.c: Daemon terminated.
When I start pavucontrol I get this:
Can someone help me correct what the issue is, please let me know if you need more information.
Thanks in advance.
Last edited by Dobbie03 (2015-05-15 20:35:02)

I tried "pulseaudio" in the terminal and get the following:
W: [pulseaudio] alsa-util.c: Unable to load mixer: Invalid argument
E: [pulseaudio] ltdl-bind-now.c: Failed to open module module-equalizer-sink.so: module-equalizer-sink.so: cannot open shared object file: No such file or directory
E: [pulseaudio] module.c: Failed to open module "module-equalizer-sink".
E: [pulseaudio] main.c: Module load failed.
E: [pulseaudio] main.c: Failed to initialize daemon.

[SOLVED] Pulse Audio / ALSA audio sharing.

SOLUTION AT POST # 4
My computer has integrated audio and HDMI. From my understanding, to be able to switch between these two types of audio hardware I require a sound server. If this is not correct, please let me know so that I can uninstall Pulse Audio. Assuming it is correct, I have numerous problems with my audio. When running multiple programs, often I have to open pavucontrol and move the volume slider around in order for the audio to play in a newly opened program. I have XFCE's volume control set to ALSA, and I am unable to change it to Pulse Audio for some reason. This is a problem because every time I mute or change the volume using XFCE's volume control, I then have to go into Pulse Audio later to change the audio back. If I run a game or VLC, and then open Firefox, I get no Flash audio. However, if I run Firefox first, I have no audio in VLC or in game. Usually I can fix this by opening pavucontrol and messing with the volume sliders. This is not ideal. Ultimately it seems the problem is that the program I am using are not sharing the audio hardware, so only one can play audio at a time.
What can I do to make my audio work as it should?
Here is my audio hardware
# lspci | grep -i audio
00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05)
Screenshot of the only sound card option I have in the XFCE Audio Mixer Plugin:
http://imgur.com/3TJWC
I searched the Wiki, but it is out of date. https://wiki.archlinux.org/index.php/PulseAudio#ALSA
. . . For the applications that do not support PulseAudio and support ALSA it is recommended to install the PulseAudio plugin for ALSA. This package also contains the necessary /etc/asound.conf for configuring ALSA to use PulseAudio.
To prevent applications from using ALSA's OSS emulation and bypassing Pulseaudio (thereby preventing other applications from playing sound), make sure the module snd_pcm_oss is not in the MODULES array in /etc/rc.conf. If it is currently loaded (lsmod|grep oss), disable it by executing: . . .
How can I do this using systemd instead of rc.conf?
Edit: Since there is a lack of response, I am completely changing the entire post in order to be clear and productive.
Last edited by qKUqm3wtY4 (2013-01-05 04:52:15)

I found a solution here: http://forums.opensuse.org/english/get- … audio.html
You must create /etc/asound.conf and insert the following:
pcm.pulse {
type pulse
ctl.pulse {
type pulse
pcm.!default {
type pulse
ctl.!default {
type pulse
pcm.phononpulse {
type plug
slave.pcm {
type pulse
hint {
show on
description "PulseAudio"

Alsa and pulse audio issue

Similar Messages

Maybe you are looking for