Alsaconf....no entry for USB config

What is the procedure to enable USB snd?

The new tab page (about:newtab) wasn't introduced until a later version of Firefox (iirc, ''Firefox 10'') , which is why that pref can't be found.
Sounds like your father picked up some Malware.
Maybe this is what you're dealing with.
http://www.shouldiremoveit.com/IMVU-Inc-Toolbar-34367-program.aspx
Also, I see a number of Plugins listed to bee concerned about.
Toolbar Plugin
MindSpark Toolbar Platform Plugin Stub for 32-bit Windows
WildTangent Games App V2 Presence Detector

Similar Messages

Efibootmgr & gummiboot replaced UEFI entry for Windows Boot Manager

TLDR
I am now in Windows 7 and dual boot with Arch is working fine.
But before I update Arch, I would like to understand what happened, as in why adding an efibootmgr entry for Arch replaced/deleted the Windows Boot Manager entry although I followed the BG.
The status of my UEFI boot menu was, before the installation of Arch:
Windows Boot Manager
AHCI HDJ... (hard drive 1)
AHCI ST... (hard drive 2)
While working through the BG, I decided to use gummiboot=> https://wiki.archlinux.org/index.php/Be … #Gummiboot. So:
pacman -S gummiboot
gummiboot install
pacman -S efibootmgr
gummiboot install
[some error ocurred, as mentioned in red box]
efibootmgr -c -L "Gummiboot" -l /EFI/gummiboot/gummibootx64.efi
nano /boot/loader/entries/arch.conf
title Arch Linux
linux /vmlinuz-linux
initrd /initramfs-linux.img
options root=/dev/sdb3 ro
[CTRL + X, Y, Enter]
exit
umount /mnt/{boot,home,}
reboot
I then saw a new list of the UEFI boot order:
Gummiboot
AHCI HDJ... (hard drive 1)
AHCI ST... (hard drive 2)
Chose Gummiboot and it brought up a gummiboot menu with entries
Arch Linux
Windows Boot Manager
EFI Shell something
Selected Arch Linux and it went to a message something along "boot device ' ' not found" and I was in a shell which was, I think, rootfs.
I rebooted via the button on my desktop and out the Arch Linux USB drive back. After mounting the partitions:
gummiboot remove
efibootmgr
[0000: Windows Boot Manager
[0001: Arch Linux
[0002: AHCI HDJ...
[0003: AHCI ST...
exit
umount /mnt/{boot,home,}
reboot
Now I booted into a black screen with white text which said something "Reboot and select proper Boot device"
=> Inserted Win 7 64-bit DVD, repaired the boot sector. Rebooted, saw I had these entries again:
Windows Boot Manager
AHCI HDJ... (hard drive 1)
AHCI ST... (hard drive 2)
The boot into Windows worked fine. Rebooted, chrooted into my install again and:
efibootmgr
[0000: Arch Linux
[0001: Windows Boot Manager
[0003: AHCI HDJ...
[0003: AHCI ST...
efibootmogr -b 0 -B
Then I used the EFISTUB method:
efibootmgr -c -L "Arch Linux" -l /vmlinuz-linux -u "root=/dev/sdb3 ro initrd=/initramfs-linux.img"
efibootmgr
[0000: Windows Boot Manager
[0001: Arch Linux
[0002: AHCI HDJ...
[0003: AHCI ST...
exit
umount /mnt/{boot,home,}
reboot
On reboot, 'Windows Boot Manager' was again replaced by 'Arch Linux'.
=> Inserted Win 7 64-bit DVD, repaired the boot sector.
Rebooted, I have now Windows Boot Manager + Arch Linux and dual boot works now.
My questions:
What is going on with efibootmgr replacing/deleting the Windows entry? Is there something wrong with my UEFI menu?
In connection with 1., I would like to sync the EFISTUB Kernel (wiki entry) before I run pacman -Syu. Can I do that now?
Can I uninstall gummiboot now?
Last edited by jones (2013-07-11 12:30:55)

henrik wrote:So in light of your post, I decided to ditch EFISTUB + gummiboot and try out GRUB. Thanks for clearing it up a bit. Which is what confuses me a great deal more, as GRUB/gummiboot obviously do not meddle with Microsoft's EFI files. Right?
EFI relies on two things to boot:
Boot loader program files on the ESP (or occasionally elsewhere).
NVRAM entries pointing to the boot loader files.
Your own problems seem to be with the NVRAM entries, not with the boot loader files themselves. Unfortunately, managing those NVRAM entries has proven to be problematic because of bugs in specific EFI implementations, bugs in efibootmgr and other tools that manipulate the NVRAM entries, poor documentation, and other factors.
To answer your question, though, no boot loader should mess with another's files. Such things can happen, though. The number of bugs that cause Microsoft's boot loader (EFI/Microsoft/Boot/bootmgfw.efi) to be treated deferentially have provoked some tools to use it as a target location for other boot loaders. (Ubuntu's Boot Repair tool does this in a rather overzealous way. So does my own rEFInd installer script, but only under certain narrow circumstances.) Also, the EFI/BOOT/bootx64.efi file is a special case; it's the fallback bootloader that's used when NVRAM entries are missing or don't work, and various boot loader installation procedures place copies in that location, so it can be overwritten and could contain just about anything.
However, the whole thing happened again with GRUB. So I did the whole "repairing Boot problems" with the Windows DVD rescue thingy again and deleted all non-Microsoft files from the EFI partition, /dev/sda1.
Then I formatted / (root) and installed arch again and followed the Beginners' Guide which suggest mounting /dev/sda1/ to /mnt/boot (in contrast to the GRUB entry where the ESP should be mounted to /mnt/boot/efi).
I strongly advise against doing a complete re-installation just to overcome a boot loader problem. Instead, figure out what the problem is and fix it. Doing a complete re-installation is not likely to fix anything, and depending on precisely how you do it, you could end up with a more complex problem. The reason is that the re-installation is not likely to erase the NVRAM entries from the old installation, so you could find that you've got additional stray NVRAM entries. If you do happen to fix the problem by re-installing (say, because you selected a different installation option), you're not likely to know what changed to fix the problem, so you could end up in the same boat should you need to re-install again in the future.
But it did not show this line
Found Windows 7 (loader) on /dev/sda1
... how come??
I've given up trying to understand GRUB's configuration scripts. You could try creating an entry manually by editing /etc/grub.d/40_custom; or you could forget about using the GRUB scripts and create a hand-crafted grub.cfg; or you could forget about using GRUB at all. I'm not a fan of GRUB, so my personal choice is the final one.
So for all the headache and time ... should I delete the EFI partition and recreate it maybe? I think it's possible using the Windows 7 DVD.
But somehow using efibootmgr on my UEFI list somehow invalidated the Windows entry.
Reviewing your posts, it seems that you want to use the EFI stub loader directly, but you're having problems with that because when you add it to the NVRAM entries, Windows drops off your boot manager's boot options. The obvious solution to this problem is to forget about adding the EFI stub loader directly to the NVRAM entries, and instead add a boot manager that can handle either a Linux kernel or the Windows boot loader. (IMHO, this is the superior solution anyhow; I disagree with the Arch wiki's emphasis on using the EFI stub loader "raw.") It seems you were trying to do this with GRUB but had problems booting Windows. Earlier you tried gummiboot but had problems booting Linux. My suggestion is to either go back to gummiboot and fix its problem or try rEFInd. The "device not found" error you reported with gummiboot is usually caused by either a missing (or incorrectly-specified) initrd file or by an incorrectly-specified "root=" option passed to the kernel. Check those possitilities, and if you need help, report what happens in more detail. If necessary, take a digital photo of the screen and post it here. (Make sure it's legible, though!)
You can try rEFInd with minimal disk by using a CD-R or USB flash drive image. Boot with that and your NVRAM and ESP won't be affected at all. If you can get rEFInd working from the flash drive, you can then install it to your hard disk and it should continue working. Note that you probably won't be able to boot Linux directly from rEFInd with your current configuration without adding a "root=" specification to the kernel command line. You can do this by hitting F2 or Insert twice rather than launching Linux by pressing Enter. Alternatively, you can create a refind_linux.conf file in the directory that holds your kernel. That file's contents are described in the rEFInd documentation.

Default entry for Folder property - Changed behavior in SP14???

Hello,
Has anyone run into changed behavior for this page property in SP14. It seems to be valid for pages in both folders and worksets.
Ex. We have a workset that sits at 2nd level nav just below a 1st level entry point. So the workset is a 2nd level nav choice. The top page in that workset is the landing page for that nav and previously in SP9 the nav worked fine. We are finding now that in SP14 we have to set the Default Entry for Folder property to "yes" to make the 2nd level nav work. This could be another config issue in our environments but is following SP14 so far. Has anyone else sen this?
Thanks,
Doug Steckel
Air Products & Chemicals

Hi Daniel,
NavStructure:
... - Folder A
 - Page A <inv & defPage>
 - Page P1
 - Page P2
If you click on folder A, you get the content of page A which for the end-user is not explicitely visible in navigation. So page A "is" the content of folder A.
This is how web-like nav works, that you can click on a nav entry and that this entry has it's own content and not only the preset content of some sub entry.
Hope it helps to understand what I meant
Detlev

Why does the location bar only perform searches, even typing about:config just returns a google search for "about:config"

My location bar will only perform web searches and no longer takes the browser directly to web address entered manually. for example typing "about:config" returns the results of a google search for "about:config", typing "http://www.gawker.com" does not take me to gawkers website but rather returns google search results for "http://www.gawker.com".

''You might want to disable or remove that Yahoo! activeX Plug-in Bridge that shows in your Installed Plugins. Firefox doesn't do ActiveX and a plugin like that might leave you open to being exploited.''
First you need to figure out if an extension you have installed is causing that.
Do you have that problem when running in the Firefox SafeMode? 
[http://support.mozilla.com/en-US/kb/Safe+Mode] 
''Don't select anything right now, just use "Continue in SafeMode."''
If not, see this: 
[http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes]
Or, it could be caused by Malware.
Install, update, and run these programs in this order. '''''(Not all programs detect the same Malware.)''''' They are all free for personal use, but some have limited functionality in the "free mode" - but those are features you really don't need to find and remove the problem that you have. 
''Note: If your Malware infection is bad enough and you are mis-directed to URL's other than what is posted, you may have to use a different PC to download these programs and use a USB stick to transfer them to the afflicted PC.''
Malwarebytes' Anti-Malware - [http://www.malwarebytes.org/mbam.php] 
SuperAntispyware - [http://www.superantispyware.com/] 
AdAware - [http://www.lavasoftusa.com/software/adaware/] 
Spybot Search & Destroy - [http://www.safer-networking.org/en/index.html]
Or maybe your ISP is doing the redirect, but that is doubtful since you're getting two different redirect addresses (unless you are using two different ISP's).
There are two extensions that can prevent redirects: 
NoRedirect: 
https://addons.mozilla.org/en-US/firefox/addon/11787/
Redirect Remover: 
https://addons.mozilla.org/en-US/firefox/addon/537/

WorkManager entry for max-stuck-thread-time doesnot override the default

Hi All,
I am using WLS 10.0 and have configured the following workmanager entry in the config.xml:
<work-manager>
<name>myworkmanager</name>
<target>AdminServer</target>
<ignore-stuck-threads>false</ignore-stuck-threads>
<work-manager-shutdown-trigger>
<max-stuck-thread-time>60</max-stuck-thread-time>
<stuck-thread-count>5</stuck-thread-count>
</work-manager-shutdown-trigger>
</work-manager>
I want that the <BEA-000337> message should be logged after the work-manager-shutdown-trigger's max-stuck-thread-time exceeds (after 60 seconds).
If more than 5 threads of applications which are dispatched to this workmanager becomes stuck for more than 60 sec. an additional request to this applications are responded with http code 503.
However, no <BEA-000337> message is written in to the server’s log file.
This message is only written to the log file, when the stuck-thread-max-time (e.g. set to 150 secs) element of the servers configuration is exceeded.
Sample:
####<09.01.2009 13:31:58 IST> <Error> <WebLogicServer> <appcashd>
<AdminServerrefs1m1vm1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default
(self-tuning)'> <<WLS Kernel>> <> <> <1231504318065>
<BEA-000337> <[STUCK] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)' has been busy for "151" seconds working on the request "Http Request: /testservlet/sleep", which is more than the configured time (StuckThreadMaxTime) of "150" seconds.
Stack trace:
java.lang.Thread.sleep(Native Method)
at.compny.testservlet.SleepServlet.doGet(SleepServlet.java:61)
I believe that the <BEA-000337> message should already be logged after the work-manager-shutdown-trigger's max-stuck-thread-time exceeds (ergo after 60 seconds).
I would like to know if this is the default behavior or we are encountering a bug.
Any pointers would be appreciated

Hi,
what I was thinking about is that the work manager indeed works since the next request after the specifies number of requests is returned with a 503 error.
This makes me believe that it works !
However, the behavior of the server regarding the <stuck-thread-max-time> is not overridden.
I have specified this value as 60 seconds in the work manager.
However, this message is only written to the log file, when the stuck-thread-max-time (e.g. set to 150 secs) element of the servers configuration is exceeded.
Any Idea if this is the default behavior or if I am encountering a bug

Screen: Cannot find terminfo entry for 'rxvt-unicode', works in root

I'm using screen (http://www.archlinux.org/packages/14519/) and it works fine under root, but it keeps saying it can't find the terminfo entry for anything when I'm under a different user ('linux', 'xterm', 'rxvt-unicode'). First I tried setting URxvt*termName: rxvt (xterm as well), then I tried copying screenrc from /etc/ and /etc/skel/ to my home directory as .screenrc, and finally I tried compiling from source as another user. Does anyone have any ideas how to fix this?

phrakture wrote:Are you ssh'ing to another machine?
Nope, I've installed arch on my laptop.
This error typically happens when you ssh to a machine that does NOT have the terminfo installed.
I don't know if terminfo is the correct name of the package, but pacman -Qs *term* or *info* or terminfo didn't show anything.
Could you possibly post your screenrc, just so I can check?
This is the config I've copied from /etc/skel/ to ~/, if I type nano .screenrc after logging in this is what I'll see.
Edit: I forgot to say that screen produces the same results in xterm.
# Example of a user's .screenrc file
# This is how one can set a reattach password:
# password ODSJQf.4IJN7E # "1234"
# no annoying audible bell, please
vbell on
# detach on hangup
autodetach on
# don't display the copyright page
startup_message off
# emulate .logout message
pow_detach_msg "Screen session of \$LOGNAME \$:cr:\$:nl:ended."
# advertise hardstatus support to $TERMCAP
# termcapinfo * '' 'hs:ts=\E_:fs=\E\\:ds=\E_\E\\'
# make the shell in every window a login shell
#shell -$SHELL
# autoaka testing
# shellaka '> |tcsh'
# shellaka '$ |sh'
# set every new windows hardstatus line to somenthing descriptive
# defhstatus "screen: ^En (^Et)"
defscrollback 1000
# don't kill window after the process died
# zombie "^["
# enable support for the "alternate screen" capability in all windows
# altscreen on
# xterm tweaks
#xterm understands both im/ic and doesn't have a status line.
#Note: Do not specify im and ic in the real termcap/info file as
#some programs (e.g. vi) will not work anymore.
termcap xterm hs@:cs=\E[%i%d;%dr:im=\E[4h:ei=\E[4l
terminfo xterm hs@:cs=\E[%i%p1%d;%p2%dr:im=\E[4h:ei=\E[4l
#80/132 column switching must be enabled for ^AW to work
#change init sequence to not switch width
termcapinfo xterm Z0=\E[?3h:Z1=\E[?3l:is=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;4;6l
# Make the output buffer large for (fast) xterms.
#termcapinfo xterm* OL=10000
termcapinfo xterm* OL=100
# tell screen that xterm can switch to dark background and has function
# keys.
termcapinfo xterm 'VR=\E[?5h:VN=\E[?5l'
termcapinfo xterm 'k1=\E[11~:k2=\E[12~:k3=\E[13~:k4=\E[14~'
termcapinfo xterm 'kh=\EOH:kI=\E[2~:kD=\E[3~:kH=\EOF:kP=\E[5~:kN=\E[6~'
# special xterm hardstatus: use the window title.
termcapinfo xterm 'hs:ts=\E]2;:fs=\007:ds=\E]2;screen\007'
#terminfo xterm 'vb=\E[?5h$<200/>\E[?5l'
termcapinfo xterm 'vi=\E[?25l:ve=\E[34h\E[?25h:vs=\E[34l'
# emulate part of the 'K' charset
termcapinfo xterm 'XC=K%,%\E(B,[\304,\\\\\326,]\334,{\344,|\366,}\374,~\337'
# xterm-52 tweaks:
# - uses background color for delete operations
termcapinfo xterm* be
# wyse terminals
#wyse-75-42 must have flow control (xo = "terminal uses xon/xoff")
#essential to have it here, as this is a slow terminal.
termcapinfo wy75-42 xo:hs@
# New termcap sequences for cursor application mode.
termcapinfo wy* CS=\E[?1h:CE=\E[?1l:vi=\E[?25l:ve=\E[?25h:VR=\E[?5h:VN=\E[?5l:cb=\E[1K:CD=\E[1J
# other terminals
# make hp700 termcap/info better
termcapinfo hp700 'Z0=\E[?3h:Z1=\E[?3l:hs:ts=\E[62"p\E[0$~\E[2$~\E[1$}:fs=\E[0}\E[61"p:ds=\E[62"p\E[1$~\E[61"p:ic@'
# Extend the vt100 desciption by some sequences.
termcap vt100* ms:AL=\E[%dL:DL=\E[%dM:UP=\E[%dA:DO=\E[%dB:LE=\E[%dD:RI=\E[%dC
terminfo vt100* ms:AL=\E[%p1%dL:DL=\E[%p1%dM:UP=\E[%p1%dA:DO=\E[%p1%dB:LE=\E[%p1%dD:RI=\E[%p1%dC
termcapinfo linux C8
# old rxvt versions also need this
# termcapinfo rxvt C8
# keybindings
#remove some stupid / dangerous key bindings
bind k
bind ^k
bind .
bind ^\
bind \\
bind ^h
bind h
#make them better
bind 'K' kill
bind 'I' login on
bind 'O' login off
bind '}' history
# Yet another hack:
# Prepend/append register [/] to the paste if ^a^] is pressed.
# This lets me have autoindent mode in vi.
register [ "\033:se noai\015a"
register ] "\033:se ai\015a"
bind ^] paste [.]
# default windows
# screen -t local 0
# screen -t mail 1 mutt
# screen -t 40 2 rlogin server
# caption always "%3n %t%? @%u%?%? [%h]%?%=%c"
# hardstatus alwaysignore
# hardstatus alwayslastline "%Lw"
# bind = resize =
# bind + resize +1
# bind - resize -1
# bind _ resize max
# defnonblock 1
# blankerprg rain -d 100
# idle 30 blanker
Here's the other config file I've tried from /etc/
# This is an example for the global screenrc file.
# You may want to install this file as /usr/local/etc/screenrc.
# Check config.h for the exact location.
# Flaws of termcap and standard settings are done here.
#startup_message off
#defflow on # will force screen to process ^S/^Q
deflogin on
#autodetach off
vbell on
vbell_msg " Wuff ---- Wuff!! "
# all termcap entries are now duplicated as terminfo entries.
# only difference should be the slightly modified syntax, and check for
# terminfo entries, that are already corected in the database.
# G0 we have a SEMI-GRAPHICS-CHARACTER-MODE
# WS this sequence resizes our window.
# cs this sequence changes the scrollregion
# hs@ we have no hardware statusline. screen will only believe that
# there is a hardware status line if hs,ts,fs,ds are all set.
# ts to statusline
# fs from statusline
# ds delete statusline
# al add one line
# AL add multiple lines
# dl delete one line
# DL delete multiple lines
# ic insert one char (space)
# IC insert multiple chars
# nx terminal uses xon/xoff
termcap facit|vt100|xterm LP:G0
terminfo facit|vt100|xterm LP:G0
#the vt100 description does not mention "dl". *sigh*
termcap vt100 dl=5\E[M
terminfo vt100 dl=5\E[M
#facit's "al" / "dl" are buggy if the current / last line
#contain attributes...
termcap facit al=\E[L\E[K:AL@:dl@:DL@:cs=\E[%i%d;%dr:ic@
terminfo facit al=\E[L\E[K:AL@:dl@:DL@:cs=\E[%i%p1%d;%p2%dr:ic@
#make sun termcap/info better
termcap sun 'up=^K:AL=\E[%dL:DL=\E[%dM:UP=\E[%dA:DO=\E[%dB:LE=\E[%dD:RI=\E[%dC:IC=\E[%d@:WS=1000\E[8;%d;%dt'
terminfo sun 'up=^K:AL=\E[%p1%dL:DL=\E[%p1%dM:UP=\E[%p1%dA:DO=\E[%p1%dB:LE=\E[%p1%dD:RI=\E[%p1%dC:IC=\E[%p1%d@:WS=\E[8;%p1%d;%p2%dt$<1000>'
#xterm understands both im/ic and doesn't have a status line.
#Note: Do not specify im and ic in the real termcap/info file as
#some programs (e.g. vi) will (no,no, may (jw)) not work anymore.
termcap xterm|fptwist hs@:cs=\E[%i%d;%dr:im=\E[4h:ei=\E[4l
terminfo xterm|fptwist hs@:cs=\E[%i%p1%d;%p2%dr:im=\E[4h:ei=\E[4l
# Long time I had this in my private screenrc file. But many people
# seem to want it (jw):
# we do not want the width to change to 80 characters on startup:
# on suns, /etc/termcap has :is=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l:
termcap xterm 'is=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;4;6l'
terminfo xterm 'is=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;4;6l'
# Do not use xterms alternate window buffer.
# This one would not add lines to the scrollback buffer.
#termcap xterm|xterms|xs ti=\E7\E[?47l
#terminfo xterm|xterms|xs ti=\E7\E[?47l
#make hp700 termcap/info better
termcap hp700 'Z0=\E[?3h:Z1=\E[?3l:hs:ts=\E[62"p\E[0$~\E[2$~\E[1$}:fs=\E[0}\E[61"p:ds=\E[62"p\E[1$~\E[61"p:ic@'
terminfo hp700 'Z0=\E[?3h:Z1=\E[?3l:hs:ts=\E[62"p\E[0$~\E[2$~\E[1$}:fs=\E[0}\E[61"p:ds=\E[62"p\E[1$~\E[61"p:ic@'
#wyse-75-42 must have defflow control (xo = "terminal uses xon/xoff")
#(nowadays: nx = padding doesn't work, have to use xon/off)
#essential to have it here, as this is a slow terminal.
termcap wy75-42 nx:xo:Z0=\E[?3h\E[31h:Z1=\E[?3l\E[31h
terminfo wy75-42 nx:xo:Z0=\E[?3h\E[31h:Z1=\E[?3l\E[31h
#remove some stupid / dangerous key bindings
bind ^k
#bind L
bind ^\
#make them better
bind \\ quit
bind K kill
bind I login on
bind O login off
bind } history
Last edited by siodine (2007-12-19 20:29:58)

What are /etc/services entries for RMI_PORT and JMS_PORT for DBConsole 11g

Good morning,
What is the CentOS /etc/services entry for the Oracle Enterprise Manager Database Control for the RMI_PORT of 5510 and the JMS_PORT of 5520 so as to ensure EM "owns" the ports?
The emca was successful and the corresponding rmi.xml and jms.xml config files have the correct ports, but they did not register within the /etc/services file while the DBCONSOLE_HTTP port of 1158 and AGENT_PORT of 3938 have the correct entries of:
dbconsole-oms 1158/tcp # Oracle dbConsole Agent
dbconsole-oms 1158/udp # Oracle dbConsole Agent
dbcontrol_agent 3938/tcp # Oracle dbControl Agent po
dbcontrol_agent 3938/udp # Oracel dbControl Agent po
So, while EM works just fine, the RMI_PORT and JMS_PORT values need to be reserved with the correct /etc/services entries.
Thanks,
Mike Jay

petrr wrote:
[In my data plan no] ICQ, Skype and another IM apps are supported. I thin they are apply maybe some port or protocol filtering.
Normally, they don’t do any port or packet inspection stuff. Although there are a lot of rumors on the Internet, I have not seen a single operator (over the whole world) doing such stuff. All cases where related to NAT and UDP miss-routing. Some could be solved, some could not becuase of bad network topology at operator side. They are far too lazy. Consequently, we have a official position here: You are not allowed and you should adhere your contact(s).
gulfmart, which issue do you face?

ESS Benefits error - No entry for period parameter 04/payroll year/payroll

Hi,
When I click on Annual Enrollment link under ESS Benefits section, I get an Error from Standard WebDynro Application - No entry for period parameter 04/payroll year/payroll period. What config could be missing in the R/3 ?
Any suggestions?
Cheers,
Murali.

Hi,
Employee assigned Payroll area (refere to IT0001- Org Assignment) not moved into prd Payperiods. And as per you Payroll area assigned to "00", Ask your payroll consultant assign payroll area period parameters and generate periods through T.code "OG00"
Issue is with T549Q..

No entry for User Business Object found

Hello All,
I'm using ISA 4.0 for R/3-Edition with SP9.
My problem is that i receive an empty site after the login.
With debugging i have found the error in BackendObjectManagerImpl.java on Line 134:
    if (boc == null)
      throw new BackendException("No entry for " + beBOType + " Business Object found");
the problem is that boc == null...and i don't know what that is?and where this boc == null can come from?Can somebody help me please?
beBOType = "User", that i see at the isaerror.log .
Too see what i have done before, please have a look on the next page in this forum at the thread "backendobject-config".
Thanks for your help,
Best regards,
Toni

hi,
use the transaction rscusta
create user and enter the user
BW User ALE          ALEREMOTE
or
rsa1 --> setting --> global setting ...
Regards
Ben

Team Cal showing double entries for Att entered in Record Working Time

We just noticed in our QA testing that Attendances that we have included in our team calendar configuration is showing as multiple entries. Then when we check IT2002 the entries are fine. What could be causing these phantom entries to appear?
I've been looking at SPRO and PTARQ to see what could be causing it and I haven't seen anything out of the ordinary.
Thoughts?
Doug

Raja.D,
I can't think of any config that would cause the double entries. However, I am looking into the notes suggested in the replies above. In test mode for request its only showing 1 entry for each attendance, but in team calendar test it shows 2. Every attendance has one record with a request id and one without.
These attendances are entered through record working time, but are viewable through the team calendar.
Thanks,
Doug
Edited by: Doug Robbins on Feb 13, 2012 1:54 PM
Edited by: Doug Robbins on Feb 13, 2012 1:56 PM

Grub (os-prober) doesn't generate the right entries for Arch

I'm getting Arch installed (on a separate partition) from a system which has Manjaro on it already. [I had lots of trouble yesterday and finally just had Manjaro do a complete install, because I couldn't get the EFI boot to work, so that's why I'm started from that.]
Manjaro generates entries for itself which work, and it generates entries for Arch, but it fills in the UUID and hdX,gptX information for Arch wrong - it puts the same information in as for itself.
I've checked under Arch's own /boot/grub/grub.cfg and that file has the correct entries.
How do I get the os-prober to see these? (i'm running the grub-update while the Arch partition is mounted).

CarlD wrote:
If I understand your post correctly, you are installing on a UEFI system. os-prober basically doesn't work on UEFI (i.e. it only works for BIOS systems).
Gummiboot is a better alternative, as it will automatically detect installed OSs via their .efi stubs.
Ah, I didn't know that (this is the first time I've done anything substantial in terms of config on an UEFI system).
Is Gummiboot fairly easy to set up? It'll find the other OSs .efi entries? I'm somewhat loath to fiddle with this as I ended up with an unbootable system yesterday (now Manjaro's installer has something in place which works (for itself), which is GRUB based).
Additional:
Right now Manjaro has got some sort of "legacy_boot" partition (256MiB) mounting at /boot, and the actual EFI partition (100MiB) mounting at /boot/efi. I understand that I should actually have the EFI partition mounting directly at /boot but am worried about a non-breaking way of trying to setup gummiboot.
Last edited by emacsomancer (2014-10-01 17:37:06)

Need Chipset Driver for USB support

Hi.
This Windows XP-SP3 PC has 4xUSB2 or 2xUSB3 on-board ports, and all have failed. All USB devices are yellow-flagged in device manager.
I have run SFC \SCANNOW and it runs to completion, and I have tried right-clicking on a yellow-flagged USB entry in Device Manager and selecting Update Driver, but that only results in the following dialog:
Cannot Install This Hardware
There was a problem installing this hardware:
Universal Serial Bus (USB) Controller
An error occurred during the installation of the device:
The driver installation file for this device is missing a necessary entry. This may be because the INF file was written for Windows 95 or later. Contact your hardware vendor stop
It has been suggested to me that I should try to obtain the Chipset Driver for USB support. Running Speccy reveals the following about the mainboard:
   Manufacturer   MICRO-STAR INTERNATIONAL CO.,LTD
   Model   MS-7267 (CPU 1)
   Version   3.0
   Chipset Vendor   Intel
   Chipset Model   i945P/PL/G/GZ
   Chipset Revision   A2
   Southbridge Vendor   Intel
   Southbridge Model   82801GB (ICH7/R)
   Southbridge Revision   A1
         BIOS
         Brand   American Megatrends Inc.
         Version   V7.1
         Date   9/02/2007
Can you help me out with this?
Thanks very much.
- Rosie

here you can find all drivers for your mobo:
http://www.msi.com/support/mb/945GCM5F_V2_FSB_1333.html#down-driver&XP 32

How to stop duplicate entry in faces-config.xml?

hi,
i am facing a problem during working in WSAD 5.1.2 that whenever i open an existing jsp page in my workbench a duplicate entry of that page is created in the faces-cofig.xml file though the server is stopped. this is no problem during development or testing pahse but whenever i deploy the EAR in application server the pages are not running those have the duplicate entry in faces-config. so is there any way to stop the duplicate entry in the faces-config.xml?
waiting for your kind reply.

Hi,
this message
com.sun.faces.config.ConfigurationException: CONFIGURATION FAILED! Class com.sun.faces.config.processor.AbstractConfigProcessor can not access a member of class irc.izv.view.handle.MyNavigationHandler with modifiers "public"
That your implementation doesn't work as the framework can't access one of the member classes. So it finds it well - your code just doesn't work
Frank

Rejecting IPSec tunnel: no matching crypto map entry for remote proxy on interface outside.

Hi,
I have read a problem where the VPN between an ISP and ourselves started dropping sessions. I have rebuilt the crypto map and tried to dig deeper into my config and some basic troubleshooting while I await the ISP to respond.
Any ideas?
Thanks Steve
https://supportforums.cisco.com/thread/255085
http://www.cisco.com/en/US/products/ps6120/products_tech_note09186a00807e0aca.shtml#solution10
5 Jun 13 15:46:25 713904 IP = 209.183.xxx.xxx, Received encrypted packet with no matching SA, dropping
4 Jun 13 15:46:25 113019 Group = 209.183.xxx.xxx, Username = 209.183.xxx.xxx, IP = 209.183.xxx.xxx, Session disconnected. Session Type: IKE, Duration: 0h:00m:00s, Bytes xmt: 0, Bytes rcv: 0, Reason: crypto map policy not found
3 Jun 13 15:46:25 713902 Group = 209.183.xxx.xxx, IP = 209.183.xxx.xxx, Removing peer from correlator table failed, no match!
3 Jun 13 15:46:25 713902 Group = 209.183.xxx.xxx, IP = 209.183.xxx.xxx, QM FSM error (P2 struct &0xda90f540, mess id 0x76c09eb7)!
3 Jun 13 15:46:25 713061 Group = 209.183.xxx.xxx, IP = 209.183.xxx.xxx, Rejecting IPSec tunnel: no matching crypto map entry for remote proxy 172.16.0.0/255.255.240.0/0/0 local proxy 0.0.0.0/0.0.0.0/0/0 on interface outside
5 Jun 13 15:46:25 713119 Group = 209.183.xxx.xxx, IP = 209.183.xxx.xxx, PHASE 1 COMPLETED
6 Jun 13 15:46:25 113009 AAA retrieved default group policy (DfltGrpPolicy) for user = 209.183.xxx.xxx
6 Jun 13 15:46:25 713172 Group = 209.183.xxx.xxx, IP = 209.183.xxx.xxx, Automatic NAT Detection Status: Remote end is NOT behind a NAT device This end is NOT behind a NAT device

Are you trying to send traffic destined towards the internet from 172.16.0.0/20 via this ASA as well? why? are you inspecting those traffic before being sent out to the internet?
If so, this end also needs to be configured with "any" as well --> crypto ACL needs to mirror image.
access-list outside_1_cryptomap extended permit ip any 172.16.0.0 255.255.240.0
Then you also need NAT on the outside interface, otherwise, traffic from 172.16.0.0/20 is not PATed to a public IP, and won't be able to reach the internet:
nat (outside) 1 172.16.0.0 255.255.240.0

4 Entries for 1 purchase of capital goods

Dear Gurus,
I am Purchasing excisable Capital Goods ( Either from local or Import Vendor). In both cases in RG 23 c Part 1, register shows 4 entries for only one capital purchase. BUt in RG23part2, system is considering first entry out of 4 entries from RG23CPart 1.WHy it is like that ?.
What is the CIN Rule for AED. is is 50 % this year and 50% next year or full 100 % in current year in case of capital goods AED.
Please Help.
Thanx in advance.

As per Std. rule u can take the ADC credit 100% in the Current year for Capital Goods.
Biswajit

Alsaconf....no entry for USB config

Similar Messages

Maybe you are looking for