ältere Datei nicht kompatibel mit Premiere Pro CS5?

Hallo,
mein Problem ist folgendes:
ich habe ein Projekt mit einer älteren Premiere Pro Version angefertigt und wollte diese mit der CS5 Version öffnen und dran weiterarbeiten. Nun kommt folgende Fehlermeldung:
--Dieses Projekt enthält eine Sequenz, die nicht geöffnet werden konnte. Diesem Sequenztyp konnten keine Vorgabedatei zur Sequenzvorschau oder ein Codec zugeordnet werden.---
Was kann ich jetzt tun, ich kann die Datei nicht öffnen.
Danke für Eure Antworten

Hallo Carlos,
den Fehler kannst du wie folgt beheben.
Gehe in den Ordner wo Adobe Media Encoder liegt. Bei mir ist es C:/Program Files/Adobe/Adobe Media Encoder.
Erstelle vom Media Encoder Programm eine Verknüpfung auf dein Desktop. Diese Verknüpfung kopierst du dann direkt in den Ordner von Adobe Premiere Pro CS5. Die Verknüpfung vom Desktop kannst du danach wieder löschen.
Dann funktioniert alles und Adobe Premiere Pro CS5 startet ohne diese Meldung.
Der Fehler muss bei mehreren aufgetreten sein. Adobe hat extra dafür ein Ticket eröffnet.
Ich hoffe ich konnt dir helfen.
Gruß Burghard

Similar Messages

  • Blackmagic H.264 Pro Recorder (H.264 Encoder) kompatibel mit Premiere Pro CC?

    Hallo, ich habe einen Blackmagic H.264 Pro Recorder (H.264 Encoder) mit dem ich bisher über die Blackmagic Media Express Software Aufnahmen importiert habe. Leider captured Media Express diese nicht mehr obwohl der Recorder erkannt wird. Blackmagic gibt an das Premiere Pro CC ebenfalls kompatibel mit dem Recorder ist. Ich habe mir nun CC als Testversion heruntergeladen, aber leider erscheint bei ,Aufnehmen‘ ,Aufnahmegerät offline obwohl der PC das Gerät erkennt. Ich nutze Windows 7 64 bit. Kann mir jemand weiterhelfen?

    QuickTime is still a 32 bit process and the 64 bit PP has to use a sort of "band-aid" to make QuickTime files work right.  It's possible that might slow things down.

  • Audio Export und andere Probleme Premiere Pro CS5

    Ich habe folgende Probleme mit Premiere Pro CS5:
    1. Sobald ich eine Sequenz exportiere (egal welches Format, auch wav als nur Audio) scheint der Ton verschoben. Ich habe Interviews zusammengeschnitten und die Schnittpunkte sind nicht so, wie ich sie in Premiere höre. Es ist, als wäre der Ton um ein paar Frames verschoben. Ebenso sind knackser im Audio zu hören, die ich in Premiere nicht höre. Woran liegt das?
    2. Ich hatte mehrere mp3 in Premiere importiert. Die Arbeitsspeicherauslastung stieg auf 7,32 GB (8GB installiert), der Computer wurde langsam und Premiere reagierte nicht mehr. Die Festplatte schrieb andauend Daten in C/Benutzer/../AppData/Roaming/Adobe/Premiere/5.0/metadataCaches. Nachdem ich die Files in wav umgewandelt hatte und die mp3s ersetz hatte funktionierte alles einwandfrei. Premiere Pro CS5 scheint ein ernsthaftes Problem mit Audio Files zu haben, die ich bei 2.0 nicht festgestellt habe.
    3. Woran liegt es, dass ich, wenn ich HD Files mit quadratischen Pixeln als mpeg2 für eine DVD raus rechnen will schwarze Ränder an den Seiten erscheinen. Stimmt da etwas mit der Umrechnung von 1920x1080 auf PAL nicht? FinalCut hat das Problem nicht.
    4. Wenn ich eine Sequenz von Premiere in After Effects sende habe ich zwar eine Komposition in After Effects aber leider keinen Inhalt. Woran liegt das?
    Vielen Dank für eine schnelle Antwort,
    Frieder

    Remix using the Laptop's internal speakers.  They seem to be the more accurate.

  • Problem mit After Effects und Premiere Pro CS5.5

    Hallo Liebe Adobe Community, ich bin neu hier. Derzeit habe ich folgendes Problem:
    Dieses taucht auf, wenn ich entweder Adobe After Effects oder Adobe Premiere Pro CS5.5 starte. Die beiden Produkte habe ich gestern als Testversion auf Adobe.de heruntergeladen. Ich habe diese auch wirklich nur als Testversion Installiert!. Am anfang ging es auch, sobald ich aber meinen Pc gestern neu gestartet hatte kam dieser Fehler. Als erstes habe ich alle Daten von beiden Programmen enternt, vohher aber Deinstalliert. Danach wieder neu Installiert, Pc wieder runter und hoch das selbe Problem. Danach habe ich es auf meine 2. Festplatte Installiert, genau der gleiche fehler!.
    Ich bitte um eure Hilfe, da ich diese beiden Produkte gerne Testen möchte!
    Falls es wichtig ist:
    Windows 7 Ultimate 64bit
    8GB Ram
    Nvidia Geforce 570gtx mit 1,25gb
    1x 1TB Festplatte
    1x 2TB Festplatte
    Danke für eure hilfe.
    Falls es hier nicht klappt, bitte via Skype: mkowsl89
    mfg
    LetsPlayNeromo!

    Danke, aber das hatt es nicht gebracht. Kommt immer noch. Das witzige ist, nachdem Windows hochgefahren ist, sind die 2 Produkte nicht mehr komplett Installiert.. es fehlen Daten. Bei Photoshop ist das nicht so, nur bei diesen. Das seh ich wenn ich auf: Computer-> Deinstallieren und Entfernen gehe. Alle Symbole und Größen der Programme stimmen, bis auf die oben genannten Programme...

  • SlowMotion in Premiere Pro CS5.5 mit 720/60p Aufnahmen

    Hallo!
    Ich habe eine Panasonic AG-AC160 Kamera und habe damit Aufnahmen im 720/60p Modus gemacht. nun habe ich 59.94 frames pro sekunde aufgezeichnet (wenn ich das richtig verstanden habe) und würde gerne in premiere Pro CS5.5 die Aufnahmen so darstellen, dass sich das Geschehen langsamer darstellt.
    Ich möchte nicht einfach die Geschwindigkeit des Clips auf 75% setzen, das Ruckeln sieht man einfach zu deutlich.
    ich habe versucht, das Material in eine "normale" 25p-Sequenz einzufügen, aber dann scheint Premiere das material anzupassen und macht Material mit 29.97 fps daraus.
    Ich hab mit verschiedenen "frame-rates" noch nicht viel Erfahrung, deswegen die Frage...
    Danke für jede Hilfe!
    Toni

    Ok, it's weird to answer my own post, yet I learned how to do it and in case someone else is just starting up, it might be helpful:
    import the 60p footage into premiere, rightclick onto it in your footage-list and got to modify > interpret footage. there you can enter your desired framerate (in my case 25fps) and click "ok". then right click on the footage again and choose "new sequence from clip" and now you have a 25fps-sequence with true slow motion footage.
    thanks to Adobe ambassador Jon Barrie!

  • Aufnahme mit Premiere Pro CC nicht möglich!

    Hallo,
    ich möchte mit Premiere Pro CC unter Mac OSX 10.8 ein Video kommentieren. Da zu nutze ich ein USB-Mikrofon welches in den Voreinstellungen auch entsprechend ausgewählt worden ist. Wenn ich nun allersings eine Spur zur aufnahme markieren möchte ist dies nicht möglich. Das "R"-Symbol lässt sich nicht anwählen, es erscheint keine Fehlermeldung sondern es bleib einfach "unausgewählt". Unter Windows war es immer unter Probleme möglich, nun weiß ich allerdings nicht weiter...

    Hi,
    ist das ausgegraut oder sowas?
    Magst Du mal nen Screenshot hochladen und beschreiben, wo genau Du da klickst?

  • Adobe Premiere Pro CS5 kann nicht auf die Arbeitslaufwerke zugreifen

    Hallo zusammen,
    Ich habe kürzlich als zweite Arbeitsumgebung neben XPSP3 Windows 7 Installiert um Premiere Pro CS5 zu testen. Die Installation klappt ohne Probleme. Ich erstelle dann in Premiere ein neues Projekt, wähle die betreffenden Arbeitslaufwerke aus (So wie ich es bisher unter XP und Premiere Pro CS4 gemacht habe. Leider meldet mir Premier beim erstellen des Projektes folgendes:"Die Arbeitslaufwerke sind schreingeschützt oder nicht Verfügbar". Ich habe in Win7 über die Laufwerke_Eigenschaften "Vollzugriff" eingestellt. Kann einer mir einen Hinweis geben

    Aber das kann doch nicht die Lösung sein.
    Doch, ist es. Das sind Bugs in diesen bekloppten intel Grafiktreibern, für die in CS6 keine Workarounds eingebaut sind.
    Mylenium

  • Keine Sprachanalyse in Adobe Premiere Pro CS5

    Hallo @ll,
    ein neues Problem mit der Sprachanalyse in Adobe Premiere Pro CS5.
    Da ich gerade einen Workshop durcharbeite und laut dem Workshopbuch eine Sprachanalyse einer WAV-Datei ausprobieren wollte, habe ich festgestellt das Adobe Premiere Pro CS5 diese Sprachanalyse nicht durchführt.
    Ich lade die WAV-Datei, makiere sie und gehe dann im Arbeitsbereich Metaprotokollierung auf Analysieren. Laut dem Buch muss sich der  Media Encoder öffnen und mit der analyse beginnen.
    Das ist bei mir nicht der Fall.Es wird nur kurz  (5 sec.) der Arbeitsbereich deaktiviert, der Media Encoder wird nicht geöffnet und nach der kurzen Zeit ist der Arbeitsbereich wieder aktiv.
    Im Analysefenster steht garnichts, dass ist leer.
    Weiß jemand einen Rat?
    Danke im voraus
    Gruß Burghard

    Hallo Mylenium,
    danke für deine Antwort.  Es waren keine ordinären Permissions-Probleme und der Kremperl ist auch richtig installiert.
    Es lag einfach nur an der Tatsache das Premiere Pro den Media Encoder nicht fand. Dieses Problem trat auch erst nach einem Update auf, ich vermute mal das vom Media Encoder.
    Gruß Burghard

  • Premiere Pro CS5.5 stürzt bei "importieren" ab

    Hallo zusammen
    Nach erfolglosem Suchen in unmengen Foren habe ich nun beschlossen hier zu fragen.
    Ich habe einen iMac und mit der Software auf dem neusten Stand (OSX 10.9).
    Ich arbeite seit einiger Zeit an einem Kurzfilm in Adobe Premiere Pro CS5.5 und es hat bis heute einwandfrei funktioniert. Nun wollte ich heute noch einmal ein paar Filmdateien importieren, doch als ich auf "importieren" geklickt habe kam eine Fehlermeldung, in der stand, dass ein schwerwiegender Fehler aufgetreten ist und Adobe Premiere Pro nun beendet werden muss. Das geht nun jedes mal so, sogar wenn ich ein neues Projekt erstelle kann ich nichts mehr importieren. Ich habe Premiere Pro auf 5.5.2 geupdatet, hat aber nichts bewirkt.
    Ist das jemandem von euch auch schon passiert oder wisst ihr zufälligerweise wo das Problem liegt und wie man es beheben kann?
    Vielen Dank im voraus.

    Stürzt das Programm beim Klick auf Importieren ab oder erst beim Import?
    Es kann gut sein, dass diverse Filme mit bestimmten Codecs nicht importiert werden können und einen Absturz verursachen. Zum Beispiel exotische mp4/AVI Dateien mit mehr oder weniger nur für Windows geeigneten Einstellungen.

  • Premiere Pro CS5 zeigt beim Exportieren von Medien Hinweisfenster

    Hallo @ll,
    heute habe ich in Premiere Pro CS5 meinen ersten Film bearbeitet. Als ich den Film exportieren wollte unter Datei --> Exportieren --> Medien, geht als erstes ein Hinweisfenster auf. "Für diese Version von Premiere Pro ist ein Adobe Media Encoder-Update verfügbar. Um das neuste Update herunterzuladen, starten Adobe Updater über das Hilfemnü oder besuchen Sie die Seite xxxxxxx Update Seite von Adobe.
    Ich habe aber alle Programme von CS5 auf den neusten Stand. Adobe Premiere Pro Version 5.0.3 und Adobe Medi Encoder Version 5.0.1.0 64 bit.
    Wenn ich auf OK klicke schließt sich das Fenster und ich kann, wenn denn Adobe Premiere Pro nicht abstürzt, den Film exportieren.
    Mein System ist Windows 7 Ultimate 64 bit, Speicher 12 GB.
    Kann mir evtl jemand helfen wie ich das Hinweisfenster abgeschaltet bekomme.
    Viele Dank im voraus.
    Gruß Burghard

    Hallo Carlos,
    den Fehler kannst du wie folgt beheben.
    Gehe in den Ordner wo Adobe Media Encoder liegt. Bei mir ist es C:/Program Files/Adobe/Adobe Media Encoder.
    Erstelle vom Media Encoder Programm eine Verknüpfung auf dein Desktop. Diese Verknüpfung kopierst du dann direkt in den Ordner von Adobe Premiere Pro CS5. Die Verknüpfung vom Desktop kannst du danach wieder löschen.
    Dann funktioniert alles und Adobe Premiere Pro CS5 startet ohne diese Meldung.
    Der Fehler muss bei mehreren aufgetreten sein. Adobe hat extra dafür ein Ticket eröffnet.
    Ich hoffe ich konnt dir helfen.
    Gruß Burghard

  • Codec Problem Premiere Pro CS5

    Hallo,
    ich würde gerne ein Video mit Premiere Pro schneiden. Allerdings kommt beim Importieren die Fehlermeldung, dass der Codec fehlt oder nicht verfügbar ist. VLC spielt das Video aber ohne Probleme ab und gibt als Infos an:
    Codec: Mpeg-1/2 Video (mpgv)
    Auflösung: 1440x1080
    Bildwiederholrate: 25
    Der Container ist MOV.
    Kann man da irgendwas machen um das Video zu schneiden? Es wundert mich ein wenig, weil ich schon HD MOV Videos ohne Probleme mit Premiere geschnitten habe.
    Schonmal Danke für eure Antworten. Viele Grüße
    Foma

    Na wenn er das ganze auf dem Mac gemacht hat, dann ist die Datei auch nur dort verwendbar. Das ist ein uraltes bekanntes Problem, weil Apple sich eien eigene Version des HDV CoDecs gestrickt hat. In dem Fall wäre es sinnvoller, sich die Kamer nochmal zu borgen unds selber in Premiere alles nochmal zu capturen...
    Mylenium

  • Videodigitalisierung mit Premiere Pro CC

    Hallo, ich möchte Videos digitalisieren, was eigentlich ganz einfach mit Premiere Pro CC gehen soll. Nun habe ich in der Hilfe von Adobe folgendes gelesen:
    Für DV- oder HDV-Aufnahmen ist eine der folgenden Komponenten erforderlich:
    ein OHCI-kompatibler IEEE 1394-Port oder eine entsprechende Aufnahmekarte (FireWire, i.Link)
    einen Firewire Port hat der Mac nicht nur Thunderbolt
    eine nicht OHCI-kompatible IEEE 1394-Aufnahmekarte mit Voreinstellungen, Treibern und Plug-ins, die speziell für Premiere Pro entwickelt wurden.
    Wer kennt diese Aufnahmekarte und weiß, wo ich sie her bekomme? Ich habe einen Grapper von Terratec mit Software für Pc, der beim Mac nicht funktioniert . Ist nur über USB anzuschließen.
    Ich bin nicht genug in der Computermaterie fit, dass ich weiß, warum der Anschluß da so eine Rolle spielt. Die analogen Aignale müssen irgendwie in den Mac und dort digitalisiert an irgendeiner Schnittstelle umgewandelt werden. Anscheinend hat mein mac solch eine Achnittstelle nicht, was mich wundert, da doch angeblich alle Kreativen, die was auf sich halten, mit Mac arbeiten. Die Leute von der Hotline von Apple haben keine Ahnung und die von Adobe erst recht nicht. So müssen wir uns im Forum selbst helfen und hoffen, dass jemand mehr weiß als die Experten der Hersteller.
    Wer weiß, was ich brauche und tun muß? Danke im Voraus
    Monika

    You need a firewire card (IEEE1394) installed.
    The best thing you can do is get yourself a good converter with firewire like the ones by Grass Valley. USB does not work.
    Hook that up to the firewire and off you go.
    A DV camera can be hooked up straight to the computer.

  • I had to re-install Premiere Pro CS5 and now video are files acting funny...

    Hello. I had to reformat my system drive and did a fresh install of Windows 7 Home Premium 64-bit and then I did an anytime upgrade to Windows 7 Professional 64-bit. I then re-installed Premiere Pro CS5. Here's the problem. When I open any of my projects that I worked on BEFORE I re-installed Premiere (when I was using Windows 7 Home Premium), the video files on the timeline all look corrupted when I play the timeline now. They have these weird block artifacts and also a constant pulsing thing going on. I deleted all the media cache files and all the media cache database files but, nothing changed even though Premiere conformed every single video file in the project again. Then, I went to "Sequence" and hit "Render Entire Work Area" and after Premiere was finished rendering, I noticed the artifacts and pulsing are completely gone BUT, the video files look like a VHS tape that has been recorded over a few times. The edges of people and things in focus aren't nice and sharp like they were before I re-installed Premiere. I DO NOT have the time or patience to have to delete all the video files and import them again into the project and re-edit the entire scene! Can someone please help me resolve this problem?! I am about done with Premiere!
    Is there a way to delete the video source files that are on the left side of the timeline (next to the "Source" window, where they got imported into the project) without deleting the edited video files on the timeline and then re-import the same source video files into the project, kind of like "refreshing" the video files? If this is possible, it seems like this would fix the problem without me having to re-edit everything again.
    *Update*  My idea of just re-importing the source video clip won't work either. I deleted one of the source video clips, which deleted its reference clip on the timeline, and I re-imported the video source clip to see if it would play all weird in Premiere and sure enough, it has the same exact block artifacts and pulsing effect like all the other source clips in the project. It seems that if that's the case, it might be a codec problem. But, that doesn't make sense because if I open the clip on my hard drive with Windows Media Player or Allplayer, the clips plays perfectly fine and looks like it is supposed to. So, it must be a codec problem in Premiere??? Could it be that Premiere Pro CS5 doesn't work well with Windows 7 Professional? I find that hard to believe. Can someone please help me?
    By the way, all the video clips in the project are from my Panasonic GH1 or my Panasonic GH2. They are all 1080p/24 AVCHD. I even made a new sequence within the same project making sure the sequence settings are AVCHD 1080p 24 and still nothing is fixed.

    Have you tried exporting a 10 second section of the footage to see if the issue shows up once the seqeunce is actually exported from the timeline. I edit on CS5 with windows 7 pro at work quite often and have no issues so I assure you that isn't the issue. I also edit with AVCHD footage when at home and work quite freqeuntly as well so I'm positive that isn't the issue. It sounds like a GPU driver has been corrupted in the way it interacts with premiere pro. What type of GPU do you have? If it supports MPE's GPU acceleration have you tried turning it off and seeing if that makes any difference?
    Anyways though try to export a 10 second test section of your timeline to see if when the clip is exported from premiere it will play normally in windows media player or vlc or w/e media player you want to use. If it exports fine then you can almost be positive it's a corrupted video card driver. If that's the case I'd re-install your GPU's driver and also check your gpu makers website to see if they have a updated driver avaiable.

  • Error Importing Premiere Elements project into Premiere Pro CS5

    Hi,
    I am working on a multi-part video project that I started in Premiere Elements 8.  I put in hours upon hours of editing on the first part and I found that the more I edited, the more often the program would crash (infuriating!).  So I started using Premiere Pro CS5 to produce the second part, resolving to come back to the first part later.  Well, I've come back around to needing this first part done, and it is just undoable in Elements (crashes every 20 seconds!).  I'd like to import that project into CS5 if possible.  The help documentation says this should be perfectly possible... but I'm having no luck.
    When I attempt to open my Premiere Elements project in Premiere Pro, it tells me the project must be converted from Elements .prel to Pro .prproj, and I click through the prompts as normal.  But then as soon as it starts trying to open the project, I get this:
    "The Project could not be loaded. It may be damaged or contain outdated elements."
    I downloaded the Premiere Elements 9 trial to see if it would be less crashy (and it is), but I'd really prefer to have all my video in one program, and CS5 does the best job (and has most of my hours invested).  Elements 9 opens the "damaged" project just fine and I can edit and export normally, so why can't CS5?
    Am I stuck recreating the project from the ground up in CS5?

    In very general terms, a contemporary PrE Project (PREL), will Open in PrPro, with the steps that you outlined.
    Now, there are all sorts of considerations, for aspects that will not likely work:
    Instant Movie/Themes, as PrPro cannot read those
    Some Effects that PrPro does not have, like the NewBlue FX
    Some Transitions that PrPro does not have
    Some Title animation Presets, that PrPro does not have
    Do you have any of the above in your PrE Project? There are probably other circumstances, but those are all that come immediately to my mind.
    The simpler the PrE Project, the greater the likelyhood that it will Convert to a PrPro PRPROJ file.
    PrE 8 and PrPro CS5 should be close enough to work, again in those general terms. I can Open simple PrE 4.0 Projects in PrPro 2.0, but cannot Open PrE 7, 8 or 9 Projects in PrPro 2.0.
    Good luck,
    Hunt

  • Premiere Elements project imported into Premiere Pro CS5.5 becomes unusable after first save

    I have Premiere Pro CS5.5, and I have been trying for some time to successfuly edit an old project that was originally created in Premiere Elements (not sure which version--probably 7.0). It has the .prel extension. The project imports just fine, and I am able to edit it initially. However, if I save my new Premiere Pro project, close Pr and try to open the new project again, I get the "The project could not be loaded, it may be damaged or contain outdated elements." error message. I have tried many of the various project recovery suggestions people have made in this forum and elsewhere online, but none of them seem to work. I even opened the project in XML Wrench, but there were no errors returned when I clicked "check is well formed." Once I close the project after doing some initial editing, it is gone. Is this a known issue? Is there any way I can be able to edit the old project in Pr and save my work? Thanks!

    Have you tried using the project manager to re-copy all elements and timeline etc into a totally new directory. I'm just curious to see if that would make a difference. I'd be intrested to see if when making a new project in this manor if it would because as you have stated the normal save methods haven't.

Maybe you are looking for