Altering Object class source
For whatever reason the ActionScript base class Object has no
equals method. I want to change this so extending classes can
override this method to define their own equality. Extending Object
to include an equals method gets a bit messy since I would need to
support the "primitive" classes, like String, which extend Object.
I've added an implementation to Object in Global.as and this
goes as far as tricking the compiler. However during execution a
method not found exception is thrown. Looking at Global.as it seems
that this file doesn't contain implementations of methods.
Anyone have an idea of where the implementation for the
library classes are? Perhaps in the player itself? Additionally, am
I running the risk of player version incompatibilities?
I think there's an ObjectUtils class.
HTH;
Amy
"Slash Wannabe" <[email protected]> wrote in
message
news:gfs91u$3iq$[email protected]..
> For whatever reason the ActionScript base class Object
has no equals
> method. I
> want to change this so extending classes can override
this method to
> define
> their own equality. Extending Object to include an
equals method gets a
> bit
> messy since I would need to support the "primitive"
classes, like String,
> which
> extend Object.
>
> I've added an implementation to Object in Global.as and
this goes as far
> as
> tricking the compiler. However during execution a method
not found
> exception is
> thrown. Looking at Global.as it seems that this file
doesn't contain
> implementations of methods.
>
> Anyone have an idea of where the implementation for the
library classes
> are?
> Perhaps in the player itself? Additionally, am I running
the risk of
> player
> version incompatibilities?
>
Similar Messages
-
Object class name does not exist in IDM
Hi Team
We are process of Integrating GRC 10.1 to Enterprise Portal.Followed accordingly as per the SAP Note No. 1977781.
While running the Schema Job, we get a message Schema Imported Suxcessfully. While running the Job : GRAC_REPOSITORY_SYNC_JOB, the job
shows successful, but a Warning Message : User Adaptor Empty in SLG1 T.code.
I have checked the Path suffix,connectors,data source and all are maintained but no sure about this warning message.
Secondly,I tried for test creation of user on Portal via GRC 10.1.I am getting below error
"Object class name does not exist in IDM" Please see log below
Request gets closed stating Auto Provisioning failed.Please advice if someone has faced same issue and the steps taken to rectify it.
Thanks
NiteshHi Nitesh,
We worked on this issue for quiet sometime with SAP to get this finally fixed You can check all below mentioned notes.
First Check:
Please check the Note: 1915763 - Error Provisioning from GRC 10 to SAP Portal while adding or removing a role in Change Account request type.
This Note says that if your LDAP set as data source is read-only in Portal, then you need to change it to Modifiable in order to allow create or change user belonging to LDAP.
We have set the UME correctly and no longer read-only. But our access requests still used to fail with the following messages.
"Object class name does not exist in IDM".
Second Check:
Kindly ensure the field mapping for portal is done in IMG settings properly.
If it is fine please check below note 2033714 - AC10.0: error in SGL1 "Object class name does not exist in IDM".
This note is only to check if you have made any mistake with your portal mapping and doesn't address the correct issue.
Third Check:
Finally after implementing SAP note 1941250 - UAM: Truncated parameters provisioned on changing users from Access Request
our issue got fixed.
Regards,
Madhu. -
R3AC1- Object Bus_Trans_Msg source and target sites missing
Hi,
In the Txn code: R3AC1 for the object Bus_Trans_Msg we need to enter the source- CRM and target site-R/3 under the tab Initial flow settings which is not editable.
when we do initial download of this object in txn:R3AS if throws an error.
Please let me know how we can enter the source and target site for the object-bus_trans_msg .
Regards
PrathibaHi Srinivas,
Thank you for your response.
I have changed the object class to Customizing but not sure which Linked Bdoc needs to be selected.
Please let me know the Linked bdoc and Object class that needs to be selected in order to edit the flow contexts.
Regards
Prathiba -
Add user validation in create user form during Configure User Object Classe
Hi friends,
I like to add a user validation code (javaScript or PL/SQL) into create user form during Configure User Object Classes.
Is any way to pick user information and role assignment for validation in Portal side?
or pre event in OID provisioning befor loading LDAP?
We like to make a rols assignment validation. But portal does not have this function.
TOM, Any suggestion?
Thanks!!after study, portal form --LOVGroupSearch take a role search and display user name for select role.
Who know we are can find system object LOVGroupSearch in portal or OID?
the source SCR as /oiddas/ui/oracle/ldap/das/search/LOVGroupSearch?title=Role%3Fredirect=/oiddas/ui/oracle/ldap/das/search/LOVGroupSearch%3Ftitle=Role
When we search a role and added it. selected role appears in form Search and Select:.
When click role name in Search and Select form. system will display Group Members and group owner.
Who can find behind codes for this form or samilar pl/sql codes?
Thanks!! -
Accessing view object class (impl) method from bean (or vice versa)
Halo everyone, I am using JDeveloper 11.1.2.1.0
I have a UsersViewImpl class with a method which refresh the user table like below.
public void resetEmployeeSearch() {
removeApplyViewCriteriaName("viewCriteria");
executeQuery();
and I have a UserBean class with a method which reset the search fields values like below.
public void resetInput(ActionEvent actionEvent) {
........RichInputText = input ...
input.setValue("");
AdfFacesContext.getCurrentInstance().addPartialTarget(searchForm);
I would like to implement it in such a way that, once I press a button, both methods will be called.
I have tried to call from bean method using UsersViewImpl vs = new UsersViewImpl ..... which is wrong and wont work.
I have read about doing something like ViewObject vo = am.findViewObject("DeptView1") but I duno how to use it because I cant have a proper example.
Any suggestion on accessing view object class (impl) method from bean (or vice versa)?
Or is there any way to combine both method in the same class ?
Thank you :(User, if you get class not found exceptions you need to tell us which classes you can't find. The JSFUtils and ADFUtils classes needing some other libraries which should already be part of your Fusion Web Application template (which your adf application should be based on). If you did not use this application template, you may have to add some libraries yourself.
What is the diff of using the ADFUtils and OperationBinding way?
The ADFUtils can get you access to the application module which you then use to call exposed methods on. The disadvantage of doing this is that you have to implement your own exception framework which then handles exceptions thrown by the application module. An other thing is that if you e.g. alter a VO which you use on the page this changes are not seen on the page until you refresh the page. The binding layer does not know about these changes so the iterators (which are used on the page to show the data) are not refreshed and so you don't see the changes.
In general you should avoid using the application modul in a managed bean method and always use the binding layer (OperationBinding) to call methods. This ensures that exceptions are all handled the same way and that changes to the data model are reflected in the GUI.
Timo -
Directory Proxy JDBC object class
Hi all,
I'm connecting my proxy to an oracle database. When we create the jdbc object class using "dpconf" do we have to use an objectclass that already exists in the ldap directory?
for instance:
dpconf create-jdbc-object-class –v -e -h <hostname> -p 1389 -D "cn=proxy manager" -w /pw_file <my jdbc view> *<??objectclass?? >* <jdbc table> <dn>
I'm not understanding what they mean by mapping to an objectclass in ldap.
Any help or examples appreciated!!
Thanks
V.A JDBC object class maps an LDAP object class to one or more relational database tables. A JDBC object class works in a similar way to a join data view (see Join Data Views). Just as a join data view has primary and secondary source data views, a JDBC object class can obtain its information from more than one table. One table must be defined as the primary table, and additional tables, if they exist, are defined as secondary tables. The primary table controls the list of entries and additional information on these entries is extracted from the secondary tables.
When you define a JDBC object class, e.g person, you must specify the following operands:
The name of the JDBC data view to which this object class is attached.
The name of the JDBC object class, e.g person
The primary JDBC table from which the object class will obtain its list of entries, e,g USER_TABLE
A DN pattern that controls how DNs are constructed in the data view, e.g. cn
Optionally, one or more secondary JDBC tables.
More info are available in the docs at [http://docs.sun.com/app/docs/doc/820-2765/jdbc_dataview?a=view|http://docs.sun.com/app/docs/doc/820-2765/jdbc_dataview?a=view] -
How to create custom attributes & object classes through ldif files in OID
Hi,
I have to create 4 attributes and one object class(custom) in OID. I want to creae these attributes and object class through LDIF file.
I tried creating an attribute through this command
ldapadd -p 389 -h localhost -D cn=orcladmin -w password -f D:/newattr.ldif
this ldif file contains inf. for creating a new attributes:
dn: cn=subschemasubentry
changetype: add
add: attributetypes
attributetypes: ( 1.2.3.4.5.6.10 NAME "xsUserType_new" DESC "User Type Definition" EQUALITY caseIgnoreMatch
SYNTAX "1.3.6.1.4.1.1466.115.121.1.15" )
I am getting error: Object class violation
Failed to find add in mandatory or optional attribute list.
Please help to find where I am going wrong...
Thanks.Hi Ajay,
Thank you for the help. Now i am able to create both attributes and object classes in OID through Ldif files.
I was getting constraint violation error because (I think) I was not giving proper naming convection for attributes and object classes. For OID, there are certain Ldap naming conventions. They are as follows:
# X below is the enterprise number assigned by IANA
1.3.6.1.4.1.X.1 - assign to SNMP objects
1.3.6.1.4.1.X.2 - assign to LDAP objects
1.3.6.1.4.1.X.2.1 - assign to LDAP syntaxes
1.3.6.1.4.1.X.2.2 - assign to LDAP matchingrules
1.3.6.1.4.1.X.2.3 - assign to LDAP attributes
1.3.6.1.4.1.X.2.4 - assign to LDAP objectclasses
1.3.6.1.4.1.X.2.5 - assign to LDAP supported features
1.3.6.1.4.1.X.2.9 - assign to LDAP protocol mechanisms
1.3.6.1.4.1.X.2.10 - assign to LDAP controls
1.3.6.1.4.1.X.2.11 - assign to LDAP extended operations
By using these conventions for attributes and object class, I did got any error and they were created in OID.
Thanks a zillion.
Kalpana. -
Error: initialization error: file java\lang\Object.class not found
when the error listed my classpath's its not the same list that is in my Windows XP environment variable list?
I am on 9.0.3
I am assuming I have to set some varible to my new jdk\bin directory. I reinstalled it. I have set it to use jdk 1.4 using the ojvm tool a while back.Please help!!
I did change the jdev.conf file setting:
SetJavaHome /System/Library/Frameworks/JavaVM.framework/Versions/1.4.2/Home
and I still get this error:
initiallization erro: file java/lang/Object.class not found in classpath
I am usgin Oracle JDeveloper 10g 10.1.2 on a Mac OS X Tiger
Could someone please help?
thanks a bunch!!! -
Creation of Disctribution Model view using Distribution using object classe
Hi All ,
Can anybody tell me how to create distribution model through Distribution using object classes option in SALE transaction(Path : SALE - > Modelling and implementing Business processes - > master data Distribution - > Distribution using object classes).What is the difference between normal distribution model creation through BD64 and creating in the above way?
Please help me its urgent.Thanks in advance.
Regards,
Rakesh.Hi All ,
Can anybody tell me how to create distribution model through Distribution using object classes option in SALE transaction(Path : SALE - > Modelling and implementing Business processes - > master data Distribution - > Distribution using object classes).What is the difference between normal distribution model creation through BD64 and creating in the above way?
Please help me its urgent.Thanks in advance.
Regards,
Rakesh. -
How to get the object class field value in CDHDR table for vendor
hi
how to get the object class field value in CDHDR table for vendorTry KRED/KRED_N as object class in CDHDR for Vendor.
-
Object Class Invalid when downloading the pricing procedure from ECC to CRM
Hi,
I want to download the pricing procedure for that I have created the ZDNL_CUST_CND which contains only the following tablesT683, T683S, T683T and T683U.
When I check in R3AM1 status is Red.
The following Error have been found in SLG1
Object class invalid
Error in inbound data check
Message no. CND_MAP120
Diagnosis
During the receiving inspection, serious errors were found in the consistency of the exchange object.
System Response
Data exchange is terminated
Data exchange terminated
Message no. CND_MAP122
Diagnosis
Data exchange has been terminated due to serious errors. No exchanged data has been posted in the system.
The following Error has been found in SMQ1
R3AD_CONDITIONS STOP
Details of STOP
Set by Host name: litldq; Transaction: ; Report: SAPMSSY1
I have checked the connection, everything is perfect.
What may be the problem?
ThanksHi,
Please try to re-generate the adapter object (ZDNL_CUST_CND) services using trx.
SMOGGEN
. After this, try re-running the load.
I assume that your CRM inbound mapping module are correctly coded. If the problem persists, try de-registering the R3AD_CONDITIONS inbound queue using trx.
SMQR
and then debugging the inbound queue from the same trx. after re-starting the load.
Reward if this helps!
Regards,
Sudipta. -
Are Vendor Payment Terms on RFx Object in Sourcing?
Hi There,
We uncovered this document via a Google search:
http://help.sap.com/scenarios_bus2008/helpdata/en/6d/4c0a50eab44534bef84c9b7bcec94a/content.htm
The document implies that the vendor payment terms are on the RFx object but I cannot confirm that the field exists on this object in Sourcing 7. Does anybody know what version of Sourcing supports this mapping? I haven't been able to find the document that this link belongs to, so it's possible that it's an orphaned page from some old documentation, but I'd appreciate confirmation from one of the experts on this forum.
Thanks!
Shankeri can confirm that the mapping is available in the standard mapping for Release 7.0. (MM_Award_To_Purchase_Order)
also, there are many other fields available not included in the mapping guide, but also readily available for use, with some amendments to the Data Types in SAP PI.
see link for integration guide (including the table you linked)
http://service.sap.com/~form/sapnet?_SHORTKEY=01200252310000091446&_SCENARIO=01100035870000000202&_OBJECT=011000358700000161702011E -
Reg: Object class stored in CDHDR , CDPOS tables
Hi Guys,
we have released blocked Invoice document using transaction MRBR, it is released. we have developed manually zprogram all the invoices which are released manually. but when execute we were unable to get details manually released documents. Here we observed data is fetching from CDHDR, CDPOS tables. Upon observation the Object class we found after released the invoice is getting saved with object class " BELEG". but in zprogram objcet class checking with " INCOMINGINVOICE".
can you explain the which scenario object class is saved with "BELEG", object class is saved with " INCOMINGINVOICE".
Thanks!
Mahendar Patha.Hi Steve,
(If I understood your question correctly then) Under the Object Value Column 0350035419 is the Customer number. Also under Table key column 1st three characters are your client i.e. 050 followed by customer number 0350035419.
-ruby -
How to use Object Class:orclDbServer in OID
Not sure if i have posted in the correct forum, I am quite new to OID
I am planning to use orclDbServer Object Class, but not sure how to use, i have searched in Google, and Oracle Documentation, there are so little information about this, there are only:
Object Class: orclDbServer
Description: Defines the attributes for database service entries
Attributes: orclNetDescName, orclVersion
Below is the ldif file i created for add one entry with object class orclDBServer:
dn: cn=orclDBServer_test, cn=OracleContext, dc=ldapcdc, dc=lcom
changetype: add
objectclass: top
objectclass: orclDBServer
cn: orclDBServer_test
orclNetDescName: (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST=10.182.114.121)(PORT = 1521))(CONNECT_DATA = (SERVER = DEDICATED)(SERVICE_NAME = oh112)))
after i use below command to add this entry:
ldapadd -h localhost -p 389 -D "cn=orcladmin" -w welcome1 -f test_add.ldif
then use ldapsearch to search:
ldapsearch -h localhost -p 389 -b "dc=lcom" "objectclass=orclDBServer"
the result is like below:
cn=orclDBServer_test, cn=OracleContext, dc=ldapcdc, dc=lcom
cn=orclDBServer_test
orclnetdescname=(DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST=10.182.114.121)(PORT = 1521))(CONNECT_DATA = (SERVER = DEDICATED)(SERVICE_NAME = oh112)))
objectclass=top
objectclass=orclDBServer
objectclass=orclService
It seems it added a line for me:
objectclass=orclService
Is there anything wrong with my ldif file when i want to use orclDbServer?
Edited by: ening on Jan 5, 2010 9:31 PMHi,
if you are having main controller and sub-controller then you may need to use below coding to use application class reference.
*Data declaration
DATA: obj_cntrl TYPE REF TO cl_bsp_controller2,
obj_sub_cntrl TYPE REF TO z_cl_sub_cntl,
application TYPE REF TO z_cl_application.
*Get the controller
CALL METHOD obj_main_cntrl->get_controller "obj_main_cntrl is the object of main controller
EXPORTING
controller_id = 'SUB' "Controller ID
RECEIVING
controller_instance = obj_cntrl .
obj_sub_cntrl ?= obj_cntrl .
application ?= obj_sub_cntrl ->application.
or simply use below code in your controller method.
application ?= me->application.
Thnaks,
Chandra -
How to create object class for a z table
Hi All,
I have a z table and I want to register the changes of fields should be logged to CDHDR and CDPOS table.
Is this possible?
If yes how can I creat an object class for a z table. I have already checked the change document option in z data element.
Please help.
Regards,
Jeetu
Moderator message: standard functionality, please search for available information/documentation before asking.
locked by: Thomas Zloch on Oct 6, 2010 6:16 PMTcode SCDO. You'll need to create a change document for you Z table and then use the FM created to record the changed data.
Maybe you are looking for
-
going from 4s to 6 can I save my favorite voice mails and voice memos to put on my new phone via pc or cloud
-
perspective transformation is still not working well: when applying an vertical or horizontal correction the image slides out of the frame, leaving an gray border at the other side. with scaling you can get the content back, but you loose resolution
-
Sony VAIO VGN-FW11E - can't set brightness
Hello everyone! I have really annoying problem with my laptop - setting brightness just don't work. I have tested many others distributions and this work only under Ubuntu 9.10 beta. I think that is connected with this. How can I use this patch in a
-
hi, when i use pie charts for reporting data in discoverer the value of fields(each slice) r displayed as decimal values(eg:56.00) which i need to be a whole number(56) without decimal places. how can i set the field type or pie chart options to sati
-
I have had to make a new apple ID because my other ID wont work and have tried everything my new ID and Password work perfectly but I cant up-date any games and apps now because they were under the old Id how do I fix this