Alternative tooltip text shown when mouseover top level navigation?

Hi,
I've gotten a request about showing a tooltip when the user has his mouse over one of the top-level navigation menus.
For example on SDN if you hold the mouse over weblogs you would get the text : "The weblog section includes short informal rants"
The standard way of doing this is to include an alt attribute in the anchor and allow the browser to render the text as it wants (which is fine by me).
The major problem I see is where do you define this text ?
It has to be attached somehow be attached to a page and therefore probably stored in the PCD.
Has anyone done an implementation on this (or tried to do one) ?
Cheers
Dagfinn

Got it working on my own now.
Implemented it by using the text in the description field.
Create a new top level navigation using the existing class and retrieving the value using the method defined in How to retrieve the description of a role
Then some minor changes to the jsp and js classes.
Of course I might need to redo it after an upgrade, but I just have to live with that.
Cheers
Dagfinn

Similar Messages

Portal run time error when clicking on top level-navigation

Hi,
When I select a link from the top level-navigation I get the message <b>Portal Run Time Error</b>.
I found the log file with this entry :
<i>#1.5#001438EE39C6006F0000130F000031E800041ABD6F12C098#1155300821516#com.sap.portal.portal#sap.com/irj#com.sap.portal.portal#Guest#0####6a3f43c0293811dba664001438ee39c6#SAPEngine_Application_Thread[impl:3]_37##0#0#Error#1#/System/Server#Java###Exception ID:02:53_11/08/06_0601_18813850
[EXCEPTION]
#1#com.sapportals.portal.prt.component.PortalComponentException: Error in service call of Portal Component
User : Guest
     at com.sapportals.portal.prt.core.PortalRequestManager.handlePortalComponentException(PortalRequestManager.java:969)
     at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:343)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
     at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
     at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
     at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:522)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:405)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Caused by: com.sapportals.portal.prt.core.PortalRequestManagerException: PortalRuntimeException
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:143)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
     at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
     at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:646)
     at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
     ... 24 more
Caused by: java.lang.NullPointerException
     at com.sapportals.portal.navigation.NavigationService.getNavURLPrefix(NavigationService.java:531)
     at com.sapportals.portal.navigation.NavigationService.redirect(NavigationService.java:495)
     at com.sapportals.portal.navigation.NavigationEventsHelperService.redirectURL(NavigationEventsHelperService.java:1735)
     at com.sapportals.portal.navigation.NavigationEventsHelperService.normalizeNavigationTarget(NavigationEventsHelperService.java:1715)
     at com.sapportals.portal.navigation.NavigationEventsHelperService.getNavSessionParameter(NavigationEventsHelperService.java:784)
     at com.sapportals.portal.navigation.NavigationEventsHelperService.getCurrentNavNode(NavigationEventsHelperService.java:351)
     at com.sapportals.portal.navigation.NavigationEventsHelperService.getCurrentLaunchNavNode(NavigationEventsHelperService.java:421)
     at com.sapportals.portal.navigation.fpm.NavigationFpmListener.addToHistory(NavigationFpmListener.java:268)
     at com.sapportals.portal.navigation.fpm.NavigationFpmListener.doNavigatePhase(NavigationFpmListener.java:98)
     at com.sapportals.portal.navigation.fpm.NavigationFpmListener.doPhase(NavigationFpmListener.java:70)
     at com.sapportals.portal.pb.fpm.FPMContainer.distributeEvent(FPMContainer.java:63)
     at com.sapportals.portal.pb.fpm.FPM.doDocumentHook(FPM.java:143)
     at com.sapportals.portal.prt.service.document.DocumentHookMulticaster.doDocumentHook(DocumentHookMulticaster.java:100)
     at com.sapportals.portal.prt.service.document.DocumentHookService.doDocumentHook(DocumentHookService.java:119)
     at com.sapportals.portal.prt.service.document.DocumentHookServiceNew.doDocumentHook(DocumentHookServiceNew.java:183)
     at com.sapportals.portal.prt.connection.PortalHook.doDocumentHook(PortalHook.java:824)
     at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:261)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
     ... 28 more
#</i>

Hi Christophe,
Since you set this question as "Answered", did you find a solution to the problem? We are experiencing a similar problem when clicking top level navigation, but only in some rare cases.
Best regards,
Erik Eriksson

Top-Level Navigation Tab Image

In the top-level navigation it allows you to assign background colors for the tab colors when selected or not selected. However, you can reference an image with a unique path in this field. So when the top-level navigation renders it displays an image, gradient for example instead of a background color. I did this a while back but cannot locate this information. If someone has done this before and can provide this information that would be great.
--KAL

I just tested it, and did not manage to make it work.
I am in the Portal Outer Frame > Top-Level Navigation > Unselected Tabs of First Level > Background Color of Unselected Tabs
and this is the value I use :
background:url(http://<host>:port/irj/go/km/docs/documents/SDN/my_image.png)
Am I missing something ? Do I have to create a par file for this ?
Edited by: Fabien REVOL on Aug 6, 2010 9:28 AM

Hover Text in Top Level Navigation

Hi,
I need to add a Hover Text for Top Level Navigation.I need to display some information text regarding the Role on moving mouse over it.
I did experimenting on download of com.sap.portal.navigation.toplevelnavigation but I am unaware where exactly Change to be made.
Any ideas??
Regards,
Raja Akella.

HI Raja,
Check the Accessibility flag in the New User Registration form, if it is ON then it disables Hover feature for the portal.
Check the link esp the Header area part :
<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/ac/dc4f3eeb684212e10000000a11405a/frameset.htm">Understanding the Portal Desktop</a>
To know about Accessibility :
<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/8d/b7bf3feb915f7be10000000a11405a/frameset.htm">Accessibility</a>
Hope it helps you.
Regards,
Vivekanandan

Nested Skip Logic: How do I create a form where when a top-level option has changed, that its related sub-fields will retract (disappear)?

How do I create a form where when a top-level option has changed, that its related sub-fields will retract (disappear)?
(This question was asked also in 2012 and 2013, but no answer has been provided.)
THANKS
Deborah

Hi qwerty,
Dun tink that creative customer support sucks cos I had been dealing with them in the past and I can say that their service are quite gd and fast. If you wanted a refund, I tink you need to contact the store that sells you the product. Dun tink creative will refund you though.

Text Disappears when on top of an HTML overlay

Text Disappears when on top of an HTML overlay. This is a very simple file. It's not even part of an MSO. The text is disappearing when I view in both the desktop content viewer and the iPad.
I've tried converting to outlines, doubling the layer, copying and pasting back into. Nothing. Any suggestions

You might also try creating the html and leaving a space for you existing text. Select transparent background for you overlay and the text should be visible.

Tab in Top Level Navigation is not highlighted when clicked on

Hi guys,
We have 1 problem in EP 6.0:
I create 1 iview(testiview), and attached to the role(testrole), assigned to 1 user, then login with that user. In top level navigation, i am able to see the role(testrole) in top level navigation, but after i clicked, the tab for this role is not highlighted, but the content of iview is displayed,
Any one knows what happened?
Thanks!
Guo Feng

Hi Guo
You have created one role and added one iView under it.
now can u tell which one you made as entry point.
if Role is the entry point are you getting the iView link in the DTN ?
If you made iView as entry point and then you r getting the content in content area and the iView link in the top.
i think the second one happens...
Check the role and iView properties .
Make the Role as entry point..
Cheers
Chinmaya
Reward for helpful answers

Customized Top Level Navigation iView

Hello to all
We are using a customized TLN iview. Its source code was modified to admit different URLs, and do the filtering depending of the default framework page which is using the TNL iview,
I mean, the TLN would be copied inside a proyect folder on the Portal Content, where would be a DFPage that contains a copy of TNL iview, and this copy would have a different roleFilter attribute.
Then, the TLN was modified again in order to merge roles that had the same name.
Those changes doesn't seem really important, they have just declared some vars, and each of them added one code line. The first one extended the first part of an IF condition, and the second one extended it with another condition, using OR.
The problem is that after the modifications, our TLN doesn't highlight correctly the first node when accessing or refreshing the Portal, instead of it shows a default start page that doesn't belong to any of our roles
The TLN iview has a procedure named PrintNavNodes, which is called on the event OnClick (I assume), and when we accessrefresh the page too.
The iview works well when clicking its buttons, it's just the first time it is used when the wrong page is shown, that's the problem we need to correct.
This procedure (PrintNavNodes) lodges the code changes. The only var modified is String prefix, so maybe anyone could tell me a default value to it, o a way to catch that mistake in order to show another page when the default page is to appear.
Also, I would appreciate if anyone knows about an API, andor a How to... manual, or any kind of documentation about this subject.
We have no possibility of reject the changes, so we need to find an alternative solution. Here is the code...
Thanks in advance, and regards
    private void PrintNavNodes(IPortalComponentRequest request, IPortalComponentResponse response)
     ILogger loggerArquitectura = request.getLogger(portal_logger);
         String strDataToPrint=;
     NavigationEventsHelperService navHelperService = (NavigationEventsHelperService)PortalRuntime.getRuntimeResources().getService(com.sap.portal.navigation.helperservice.navigation_events_helper);
     NavigationNodes initialNodes = navHelperService.getRealInitialNodes(request);
!-- Change Heiko Broker for SiteNavigation
          IPortalComponentContext componentContext = request.getComponentContext();
          IPortalComponentProfile profile = componentContext.getProfile();
          String roleFilter = profile.getProperty(RoleFilter);
        if(initialNodes != null)
     INavigationNode firstChild = null;
     INavigationNode firstContent = null;
     String prefix=ROLESportal_content;
!-- Change Marta Alberto
     PROBLEM In the new TLN, when using the merge roles feature, the
     url of the merge roles is different (start with the word merge.....).
     This is a wrong implementation because it filters all the nodes that do
     not start with ROLES.
     SOLUTION Compare with the other prefix too.
     String newPrefixThatFixesTheProblem=MERGESportal_content;
     String newPrefixThatFixesTheProblem=merge(;
            if(initialNodes.size() 0)
            for(Iterator it = initialNodes.iterator(); it.hasNext();)
                INavigationNode initialNode = (INavigationNode)it.next();
                    strDataToPrint=initialNode.getName(),;
!-- Change Heiko Broker for SiteNavigation
     if (initialNode.getName().startsWith(prefix+roleFilter)
!-- Change Marta Alberto
     PROBLEM In the new TLN, when using the merge roles feature, the
     url of the merge roles is different (start with the word merge.....).
     This is a wrong implementation because it filters all the nodes that do
     not start with ROLES.
     SOLUTION Compare with the other prefix too.
      initialNode.getName().startsWith(newPrefixThatFixesTheProblem + prefix + roleFilter))
                     firstContent = PrintNode(initialNode, request, response, 0);
                     if(firstChild == initialNode)
                         if(firstChild.getLaunchURL() != null && !firstChild.getLaunchURL().equals())
                             firstContent = firstChild;
                         else
                         if(firstContent == null)
                             try
               firstContent = firstChild.getFirstChild();
                             catch(NamingException e)
               ILogger logger = request.getLogger(navigation_logger);
               if(logger != null && logger.isActive())
                    logger.severe(this, e, Exception in Top Level Navigation);
                         HttpSession httpSession = request.getServletRequest().getSession();
                         httpSession.setAttribute(NavFirstContentNode, firstContent);
            } end FOR
        response.write(););

Hi,
Check authentication related properties of iView. Make sure all of them are set to lowest level or none
Regards,
Ganga

Top Level Navigation jumps to wrong workset

Hi,
In our portal (SP15), rather than loading the first page/iview of each workset in the top level navigation, we wanted a starter page that said something like 'click a menu item to continue'. To achieve this, I created the relevant URL iview and added it (delta-link) to each workset that appeared in the TLN. I then changed the properties of the iview so that it was Invisible in the Navigation AND Default Entry for Folder. So now when you click on a TLN node, the iview appears but doesn't show in the menu.
However, this has created some strange behaviour. Once a node on the TLN has been selected that points to proper page or iview (i.e. one that appears in the navigation), if you then click on any workset on the second level (first level ones are ok), the TLN "jumps" back to the node which has the page/iview - but still shows the starter page iview. This means that users can't access any workset on the second level, except the first one to be displayed (i.e. when you have several nested worksets in a workset).
Can anyone explain why this is happening? The problem only occurs when the starter iview is both Invisible in the Navigation AND Default Entry for the Folder. Is this expected behaviour (and if so, why?) or is it a bug? Is there another way to achieve what we want?
Many thanks
Jane

If I do that, the iview does not appear because I already have an Entry Point above that level (i.e. the Workset). Entry Point as Yes only sets the initial navigation node, it doesn't force an iview to appear. (or at least this is what my testing has shown).
We may have to rethink how we can do this - does anyone know of a way to stop the first iview/page loading in every TLN node, and instead just showing the portal background?
Many thanks
Jane

Display a custom message on click of a Top Level Navigation Object

Hi Experts,
when the user clicks on the top level navigation entry link(for any application), I would like a custom message to be displayed to the end-users which would be maintained in a text file in a KM folder.
Currently, on click of the top level navigation link a workset map is displayed. But now I would like to read the text file and display the message (if any) maintained in the text file.
The message (if any) should be rendered before the workset map is displayed, or be rendered as an additional element on the same page as the workset map perhaps as an additional iView .
It is essential that the message content should not be cached by the Portal (in other words, the deactivation of the system message should not require a cache flush to become visible to the user).
The goal is to warn the users before they they access the applications of the workset map.
Can someone please guide me on this???
Regards,
Anurag

Hi,
See some info regarding Portal Eventing:
http://help.sap.com/saphelp_nwce72/helpdata/en/a5/8d1e72c20f4db2b9f577b47c1a47da/content.htm
In the link above you can see that it's possible to raise an event and subscribe to it.
Each time you navigate in the portal, the portal raises the UpdateTLN event so all you need it to subscribe to it in an iview that is located on the same page.
Since the masthead iview is in the same window (above the TLN - see the following link) you can put your javascript function in it.
http://help.sap.com/saphelp_nw04/helpdata/EN/b4/771158e4cb4bf6af9974380948db86/content.htm
Regards,
Omri

A problem Configuring Top-Level Navigation

hi, when i change the property of the Number of Display Levels in the Top-Level Navigation
(as shown in http://help.sap.com/saphelp_nw04/helpdata/en/5a/33befa45ca7f459b24d0c5d51d0749/frameset.htm)
I set to 0 and then hide the top-level navigation, i forget set the Detailed Navigation property level to 1
and now i dont have any access to the configuration menu and i cant do nothing,
can i change the Detailed Navigation set to 1 manualy outside the portal?
may be changing any configuration file?
thanks
Message was edited by: Jose Rubí
Message was edited by: Jose Rubí

Hi,
We have faced a similar problem earlier, one of the developers changed the property to 0. Luckily for us, one of the user id has got Content Administrator as the first tab, so we could change the iview template and got the TLN. Check this option.
The following is a theoritical idea only, i have not implemented this
Download "com.sap.portal.navigation.toplevel.par.bak" and change the code. Check out this link
https://help.sap.com/saphelp_nw04/helpdata/en/42/fd515a2aa95277e10000000a1553f7/content.htm
You have to change the code as
levels=2;
before this line
if(levels>0)
{ %>
Take a backup of the existing TLN par and upload the edited one with the same name. Then try login and see whether you are able to get the contents, update the property back to 2.
Note : try to upload the necessary jar files in NWDS.

How to make top level navigation not refresh

Hello Guys,
I have a question concerning on my External Facing Portal, my boss wants that when I click on a tab or a link in the Top Level Navigation , to load the content in the Content Area without refreshing the whole page, What I want is that when I click on a tab or link of the Top Level Navigation , the Top Level Navigation and the MasterHead not to refresh and that the content be loaded and refreshed only in the Content Area. The only way I know to do this is by making a frameset of my page and to make the masterhead and toplevel navigation a frame and the detalied navigation a frame and the content area a frame, and in the links to put the target property to the name of the content area frame, but I don't know if this is possible to do in the portal, I see that all is embedded and I don't know how to make a frameset like this in the portal.
Any highlights to solve this will sure be appreciated.
Thanks
Rewarding points will be given.
Luis

Hi,
When you are implementing External Facing Portal, i think you have used Light Framework Page. In Light Framework Page, only one Framework has been used, so when you click on the top level navigation, the whole page will get refresh, so there is no otherway as of my knowledge. If you use standard framework page in portal, it is possible to do (i.e. the content area only get refresh) and the concept of your External Facing Portal is eliminated here.
Regards,
Venkatesh. K
/* Points are Welcome */

How to start Top-Level Navigation on Level two?

Hi,
does anyone known a trick how i can start the top-level navigation at Level two?
I make an own frameworkpage and try to set it in the iview properties, but there is not an property for this. it is only for the detailed-navigation iView there.
For what:
I need this, because i would open an pop-up with an other portal window. I link to the popup with navigation-target=... In this pop-up should only be the content of one role. This folder i have set to "invisible in the navigation area". So the User always see him in a popup. when i start at the default Top-navigation level 1, the user see all the other navigation folders.
Best regards,
Patrick

Hi Patrick,
up to SPS13, this needs some hands on on different parts of the TLN. What I've done this spring was showing all top-level nav targets within a select box in the masthead and then, after having selected one of these entries, the TLN shows just the content of this top level entry. So this is more or less the same. As said, some work to do.
As of SPS14, with the new navigation taglib, I expect this to be much less work; anyhow, I didn't convert the results into SPS14, so I cannot say if this is really as easy as I expect.
Hope it helps
Detlev

Customizing Top level navigation

Hi,
I have requirement where in i have to customize the top level navigation. Insted of hyper links display i have to show them like buttons, not exactly buttons but the hyperlinks shown for the navigation should be removed.
Is it possible to show with out links and once click on the respective workset should be able to navigate that workset.
Is it possible to place image for each workset navigation in top level navigation.
Regards,
Ravi.

Hi Darrell,
I checked that code and it is using the navHelperServer.getQuickLink method where it gets the Quick Link Value of the pages i guess.
I could not find the method details and the declaration of this method in the help. Is it the custom method written of that class.
I am using the below standard code of the LightTopLevelNavigation.
I guess i need to put the custom code between the navNodeAnchor Tags of Selected and non selected Nodes.
<TABLE border="0" cellspacing="0" cellpadding="0" class="mainTable" align="center">
<TR>

    <TD>
      <TABLE border="0" cellspacing="0" cellpadding="0" class="table1">
        <TR>
          <nav:iterateInitialNavNodes>
            <nav:ifNavNodeInSelectedPath>
              <TD nowrap class="chosenTDLevel1">
                <% if(previewMode) { %>
                  <A class="chosenOnLevel1"><nav:navNodeTitle/></A>
                <% } else if(levels==1) { %>
                  <nav:navNodeAnchor navigationMethod="byURL" anchorAttributes="class='chosenOnLevel1'">
                  </nav:navNodeAnchor>
                <% } else if(levels==2) { %>
                  <nav:navNodeAnchor navigationMethod="byURL" anchorAttributes="class='chosenOnLevel1'" urlParameters="InitialNodeFirstLevel=true"/>
                <% } %>
              </TD>
              <% if(levels==2) { %>
                <nav:storeNavNode/>
              <% } %>
            </nav:ifNavNodeInSelectedPath>
            <nav:ifNotNavNodeInSelectedPath>
              <TD nowrap class="unChosenTDLevel1">
                <% if(previewMode) { %>
                  <A class="chosenOnLevel1"><nav:navNodeTitle/></A>
                <% } else if(levels==1) { %>
                  <nav:navNodeAnchor navigationMethod="byURL" anchorAttributes="class='unChosenOnLevel1'"/>
                <% } else if(levels==2) { %>
                  <nav:navNodeAnchor navigationMethod="byURL" anchorAttributes="class='unChosenOnLevel1'" urlParameters="InitialNodeFirstLevel=true"/>
                <% } %>
              </TD>
            </nav:ifNotNavNodeInSelectedPath>
               <nav:ifHasMoreIterations>
                 <TD nowrap class="spacingTDPipeLevel2" valign="center"> | </TD>
               </nav:ifHasMoreIterations>
          </nav:iterateInitialNavNodes>
          <TD nowrap class="spacingTDLevel1"> </TD>
        </TR>
      </TABLE>
Thanks
Sumanth

How to Display Detailed navigation passing Top level navigation node name

Hi All,
I have prepared a DLN par file but unfortunatly my requirement is such that I need to pass one of the toplevel node name as input parameter and that should display the corresponding DLN which is from 3rd level.
I have checked in sdn for passing a value to the navigation tag lib which will consider it as a selectednode but could find none.
Can some body suggest me how to acheive this.
Thanks in Advance.
Sai Krishna. K

Hi Kiran,
Thanks for your Reply..
Following is my Scenario:
I use 2 same versions of portals connected via federated portal concept.
I have my detailed navigation par file in portal2 and was calling it from portal1 from a iview.
Since I am not physically navigating in portal2(which mean there is no selected node to iterate ), when I call that iview in portal1 it is picking up only 1st node in top level navigation.
So i need to pass "My reports" (as 1st level) & "India" (as 2nd level) as parameters such that it gets only its DTN at all times from 3rd level.
Hope you understand my scenario, below is my iteration code logic.
<div id="myslidemenu" class="jqueryslidemenu">
<ul>
     <nav:iterateSelectedNavNodesLevel level="<%=START_LEVEL%>">
     <%-- the 'currentDepth' attribute provides the byte value of the current level --%>
    <nav:recurseNavNodeChildren currentDepth="depth">
         <% current = start + depth.intValue() - 1; %>
         <%=writeClosingTags(last - current)%>
         <%
        last = current;
        %>
        <%-- we want to distinguish between folder and leaf nodes so we can use different graphics --%>
          <%-- complete the html syntax for the 'class' attribute pass it as an anchor attribute--%>
          <li><nav:navNodeAnchor navigationMethod="byURL" />
          <%-- checks for additional navigation level and the appropriate html tags to accomodate them --%>
        <nav:ifNextRecursionDepthWillIncrease>
            <ul>
        </nav:ifNextRecursionDepthWillIncrease>
        <nav:ifNextRecursionDepthWillNotChange>
            </li>
        </nav:ifNextRecursionDepthWillNotChange>
    </nav:recurseNavNodeChildren>
    <%=writeClosingTags(last - start)%>
    <% last = start; %>
</nav:iterateSelectedNavNodesLevel>
</ul>
</div>
As per the passing parameter concept please explain me a bit more clear with step by step procedure.
<b>Here if not passing parameters, providing static values will also do for my requirement.</b>
Many Thanks,
Sai Krishna.
Edited by: Konchada Sai Krishna on Feb 14, 2009 9:42 PM

Alternative tooltip text shown when mouseover top level navigation?

Similar Messages

Maybe you are looking for