ALV Grid - Display/change Problem
Hi Guys,
I have a peculiar problem. I have developed a Module pool application containing two screens. In the first screen I have a input field and 2 buttons for display and change. When I enter the value and press Displaythe second screen is called which shows an ALV grid in the respective display mode. But If I come back and press change I could not get the change mode for the ALV grid still it remains in the Display mode. Again if rerun the transaction and press change it shows the ALV grid in change mode but if we press back and choose display then it is not getting changed still remains as such. In all at the first run what ever the mode is chosen it remains stationery. I am using OOALV and i have tried flushing the container, grid and also refreshing the ALV. But could not trace the problem. If you guys have worked or can put some inputs please reply back.
Jagath.
Please find the attached code...
from the first screen 100 i am assigning the flag w_display or w_change based on the okcode. in the second screen 200 PBO i have the following code:
MODULE status_0200 OUTPUT.
SET PF-STATUS 'STAT200'.
SET TITLEBAR 'TIT200'.
if w_display eq 'X'.
perform grid_display.
else.
perform grid_change.
endif.
ENDMODULE. " STATUS_0200 OUTPUT
Now in perform display I have the following code:
form grid_display .
Set the Fieldcatalog.
REFRESH t_fieldcat.
PERFORM get_field_catalog.
set the Layout.
CLEAR wa_layout.
wa_layout-cwidth_opt = 'X'.
wa_layout-stylefname = 'CELLTAB'.
set the Variant
w_variant-report = sy-repid.
Create the Instance for container
IF lcl_custom_disp IS INITIAL.
CREATE OBJECT lcl_custom_disp
EXPORTING
PARENT =
container_name = 'CONTAINER1'
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
lifetime_dynpro_dynpro_link = 5
OTHERS = 6.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
create the object for ALV grid
CREATE OBJECT lcl_grid_disp
EXPORTING
i_parent = lcl_custom_disp
EXCEPTIONS
error_cntl_create = 1
error_cntl_init = 2
error_cntl_link = 3
error_dp_create = 4
OTHERS = 5.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Create the object for events
CREATE OBJECT lcl_events.
SET HANDLER lcl_events->handle_top_of_list FOR lcl_grid_disp.
Display the ALV.
CALL METHOD lcl_grid_disp->set_table_for_first_display
EXPORTING
is_variant = w_variant
i_save = ' '
is_layout = wa_layout
CHANGING
it_outtab = t_final[]
it_fieldcatalog = t_fieldcat
EXCEPTIONS
invalid_parameter_combination = 1
program_error = 2
too_many_lines = 3
OTHERS = 4.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ELSE.
Refresh the ALV grid
CALL METHOD lcl_grid_disp->refresh_table_display
EXPORTING
IS_STABLE =
I_SOFT_REFRESH =
EXCEPTIONS
finished = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF.
endform. " grid_display
In the perform change the same code is followed for different object with the fieldcatalog is changed to edit based on flag.
Set the Fieldcatalog.
REFRESH t_fieldcat.
PERFORM get_field_catalog.
set the Layout.
CLEAR wa_layout.
wa_layout-cwidth_opt = 'X'.
wa_layout-stylefname = 'CELLTAB'.
set the Variant
w_variant-report = sy-repid.
Create the Instance for container
IF lcl_custom_chng IS INITIAL.
CREATE OBJECT lcl_custom_chng
EXPORTING
PARENT =
container_name = 'CONTAINER1'
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
lifetime_dynpro_dynpro_link = 5
OTHERS = 6.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
create the object for ALV grid
CREATE OBJECT lcl_grid_chng
EXPORTING
i_parent = lcl_custom_chng
EXCEPTIONS
error_cntl_create = 1
error_cntl_init = 2
error_cntl_link = 3
error_dp_create = 4
OTHERS = 5.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Create the object for events
CREATE OBJECT lcl_events.
SET HANDLER lcl_events->handle_top_of_list FOR lcl_grid_chng.
SET HANDLER lcl_events->handle_data_changed FOR lcl_grid_chng.
SET HANDLER lcl_events->handle_data_changed_finished FOR lcl_grid_chng.
Display the ALV.
CALL METHOD lcl_grid_chng->set_table_for_first_display
EXPORTING
is_variant = w_variant
i_save = ' '
is_layout = wa_layout
CHANGING
it_outtab = t_final[]
it_fieldcatalog = t_fieldcat
EXCEPTIONS
invalid_parameter_combination = 1
program_error = 2
too_many_lines = 3
OTHERS = 4.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ELSE.
Refresh the ALV grid
CALL METHOD lcl_grid_chng->refresh_table_display
EXPORTING
IS_STABLE =
I_SOFT_REFRESH =
EXCEPTIONS
finished = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF.
Please let me know if you require some more inputs?
Jagath
Similar Messages
-
ALV GRID DISPLAY -Problem with Layout
Hi,
I'm using ALV GRID DISPLAY. I ran the program and in the output i created a layout Test1.Later i created a layout Test2. Now when i run the report, when i select layout Test1, the display is not as selected for the layout. but when i manualy select the layout throu change layout-->Test1, the display is working good. Can someone tell me what the problem can be?
Thanks
Challahi,
in the FM have you filled the structure IS_VARIANT.
is_variant-report = sy-repid.
is_variant-variant = <variant name>.
Regards,
Leo -
Capture Changes on ALV Grid Display
Hi,
I am displaying a check box on ALV Grid Display. I have to provide a push button on the application tool bar through which i have to perform some other action. How can i capture the changes made to that check box?
I am using the FM 'REUSE_ALV_GRID_DISPLAY'.
Thanks in Advance.
Best Regards,
Phani
Message was edited by:
Sivapuram Phani KumarHi Amit,
Solved the problem... Thank you very much.
Yesterday i have raised one more thread regarding an issue with ALV Grid... Can u please check and help me out. Here is the link for that issue...
Issue with ALV Display
Regards,
Phani -
How to change a color for a row in ALV grid display
Hi,
how to change a color for a row in ALV grid display based on a condition.Any sample code plzHello Ramya,
Did you check in [SCN|How to color a row of alv grid]
Thanks! -
Hi,
I have developed ALV Grid Report. It is working fine.
But while i am coming from alv grid display to program
by pressing BACK button it is showing one more screen
which is empty. Again I press back button it is coming to
selection screen. I don't want that empty screen.What is
the problem. Can u help me in this regard.?
Thanks
Narasimhahi
under the usercommand of back button use Exit Statement
like
At user-comand
IF sy-ucom = 'Back'
EXIT
ENdif.
Cheers
Snehi -
Problem with ALV Grid Display screen Back Button
Dear Friends ,
I have an ALV Grid Display,Here am facing a problem for my 'Back' button,i haven't defined any PF Status and is using the standard one.But after the Display when i press Back Button a blank Screen is appearing n then again i have to press back button to go to my Selection Screen.
Please Suggest if i have to take care of something else.
I want my Selection Screen when i press Back on my Display Screen.
DATA: IT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
FIELDCAT TYPE SLIS_FIELDCAT_ALV.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE =
I_INTERFACE_CHECK = ' '
I_CALLBACK_PROGRAM = 'ZRMMPD01A'
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = ' '
I_CALLBACK_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME =
I_BACKGROUND_ID = ' '
I_GRID_TITLE =
I_GRID_SETTINGS =
IS_LAYOUT = I_LAYOUT
IT_FIELDCAT = IT_FIELDCAT
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
IT_EVENTS =
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
T_OUTTAB = IT_FINAL
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
Thanks and Regards,
AshwiniHi Vijay ,
No i dont have any write statement in my proggram.
Here it is
REPORT ZRMMPD01A NO STANDARD PAGE HEADING.
TABLES : EQUI,SER03,MKPF,OBJK.
TYPE-POOLS : SLIS.
DATA IT_EQUI LIKE EQUI OCCURS 0 WITH HEADER LINE.
DATA IT_OBJK LIKE OBJK OCCURS 0 WITH HEADER LINE..
DATA IT_SER03 LIKE SER03 OCCURS 0 WITH HEADER LINE.
DATA IT_MKPF LIKE MKPF OCCURS 0 WITH HEADER LINE .
DATA : BEGIN OF IT_DISPLAY OCCURS 0,
MATNR LIKE EQUI-MATNR,
SERNR LIKE EQUI-SERNR,
BWART LIKE SER03-BWART,
WERK LIKE SER03-WERK,
CHARGE LIKE SER03-CHARGE,
LAGERORT LIKE SER03-LAGERORT,
MBLNR LIKE SER03-MBLNR,
MJAHR LIKE SER03-MJAHR,
ZEILE LIKE SER03-ZEILE,
BUDAT LIKE MKPF-BUDAT,
BKTXT LIKE MKPF-BKTXT,
USNAM LIKE MKPF-USNAM,
XBLNR LIKE MKPF-XBLNR,
END OF IT_DISPLAY.
DATA : WA_DISPLAY LIKE IT_DISPLAY.
DATA IT_FINAL LIKE IT_DISPLAY OCCURS 0 WITH HEADER LINE.
DATA IT_TEMP LIKE IT_DISPLAY OCCURS 0 WITH HEADER LINE.
DATA: IT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
FIELDCAT TYPE SLIS_FIELDCAT_ALV.
DATA :I_LAYOUT TYPE SLIS_LAYOUT_ALV,
I_EVENTS TYPE SLIS_T_EVENT.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
SELECT-OPTIONS : S_MATNR FOR EQUI-MATNR MATCHCODE OBJECT MCD,"OBLIGATORY
S_SERNR FOR EQUI-SERNR, "MATCHCODE OBJECT MCD OBLIGATORY
S_MBLNR FOR SER03-MBLNR MATCHCODE OBJECT MCD,
S_BWART FOR SER03-BWART MATCHCODE OBJECT MCD,
S_WERK FOR SER03-WERK MATCHCODE OBJECT MCD,
S_LAGET FOR SER03-LAGERORT MATCHCODE OBJECT MCD,
S_BUDAT FOR MKPF-BUDAT MATCHCODE OBJECT MCD,
S_XBLNR FOR MKPF-XBLNR MATCHCODE OBJECT MCD.
SELECTION-SCREEN END OF BLOCK B1.
SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-002.
PARAMETERS : R1 RADIOBUTTON GROUP G1 DEFAULT 'X',
R2 RADIOBUTTON GROUP G1.
SELECTION-SCREEN END OF BLOCK B2.
START-OF-SELECTION.
*Fetch Data.
PERFORM GET_DATA.
*Fill Display Fields.
PERFORM FILL_TABLE.
*Segregate data according to radio button selection.
PERFORM SELECT_CONDITION.
*Fill The Feild catalog.
PERFORM FIELD_CATALOG.
*Display Output.
PERFORM OUTPUT_DISPLAY..
*& Form GET_DATA
text
--> p1 text
<-- p2 text
FORM GET_DATA.
SELECT * FROM EQUI INTO TABLE IT_EQUI
WHERE MATNR IN S_MATNR
AND SERNR IN S_SERNR.
SELECT * FROM OBJK INTO TABLE IT_OBJK
FOR ALL ENTRIES IN IT_EQUI
WHERE EQUNR = IT_EQUI-EQUNR.
SELECT * FROM SER03 INTO TABLE IT_SER03
FOR ALL ENTRIES IN IT_OBJK
WHERE OBKNR = IT_OBJK-OBKNR
AND MBLNR IN S_MBLNR
AND BWART IN S_BWART
AND WERK IN S_WERK
AND LAGERORT IN S_LAGET.
SELECT * FROM MKPF INTO TABLE IT_MKPF
FOR ALL ENTRIES IN IT_SER03
WHERE MBLNR = IT_SER03-MBLNR
AND BUDAT IN S_BUDAT
AND XBLNR IN S_XBLNR.
ENDFORM. " GET_DATA
*& Form FILL_TABLE
text
--> p1 text
<-- p2 text
FORM FILL_TABLE.
LOOP AT IT_EQUI.
LOOP AT IT_OBJK.
IF IT_OBJK-EQUNR <> IT_EQUI-EQUNR.
SKIP.
ELSE.
READ TABLE IT_SER03 WITH KEY OBKNR = IT_OBJK-OBKNR.
IF SY-SUBRC = 0.
WA_DISPLAY-MATNR = IT_EQUI-MATNR.
WA_DISPLAY-SERNR = IT_EQUI-SERNR.
WA_DISPLAY-BWART = IT_SER03-BWART.
WA_DISPLAY-WERK = IT_SER03-WERK.
WA_DISPLAY-CHARGE = IT_SER03-CHARGE.
WA_DISPLAY-LAGERORT = IT_SER03-LAGERORT.
WA_DISPLAY-MBLNR = IT_SER03-MBLNR.
WA_DISPLAY-MJAHR = IT_SER03-MJAHR.
WA_DISPLAY-ZEILE = IT_SER03-ZEILE.
READ TABLE IT_MKPF WITH KEY MBLNR = IT_SER03-MBLNR.
IF SY-SUBRC = 0.
WA_DISPLAY-BUDAT = IT_MKPF-BUDAT.
WA_DISPLAY-BKTXT = IT_MKPF-BKTXT.
WA_DISPLAY-USNAM = IT_MKPF-USNAM.
WA_DISPLAY-XBLNR = IT_MKPF-XBLNR.
ENDIF.
ENDIF.
ENDIF.
IF NOT WA_DISPLAY IS INITIAL.
APPEND WA_DISPLAY TO IT_DISPLAY.
CLEAR WA_DISPLAY.
ENDIF.
ENDLOOP.
ENDLOOP.
ENDFORM. " FILL_TABLE
*& Form FIELD_CATALOG
text
--> p1 text
<-- p2 text
FORM FIELD_CATALOG.
FIELDCAT-TABNAME = 'IT_DISPLAY'.
FIELDCAT-FIELDNAME = 'MATNR'.
FIELDCAT-SELTEXT_M = 'Material Number'.
FIELDCAT-OUTPUTLEN = 18.
APPEND FIELDCAT TO IT_FIELDCAT.
CLEAR FIELDCAT.
FIELDCAT-TABNAME = 'IT_DISPLAY'.
FIELDCAT-FIELDNAME = 'SERNR'.
FIELDCAT-SELTEXT_M = 'Serial number'.
FIELDCAT-OUTPUTLEN = 18.
APPEND FIELDCAT TO IT_FIELDCAT.
CLEAR FIELDCAT.
FIELDCAT-TABNAME = 'IT_DISPLAY'.
FIELDCAT-FIELDNAME = 'MBLNR'.
FIELDCAT-SELTEXT_L = 'Number of material document'.
FIELDCAT-OUTPUTLEN = 18.
APPEND FIELDCAT TO IT_FIELDCAT.
CLEAR FIELDCAT.
FIELDCAT-TABNAME = 'IT_DISPLAY'.
FIELDCAT-FIELDNAME = 'BWART'.
FIELDCAT-SELTEXT_M = 'Movement type'.
FIELDCAT-OUTPUTLEN = 18.
APPEND FIELDCAT TO IT_FIELDCAT.
CLEAR FIELDCAT.
FIELDCAT-TABNAME = 'IT_DISPLAY'.
FIELDCAT-FIELDNAME = 'WERK'.
FIELDCAT-SELTEXT_M = 'Plant'.
FIELDCAT-OUTPUTLEN = 5.
APPEND FIELDCAT TO IT_FIELDCAT.
CLEAR FIELDCAT.
FIELDCAT-TABNAME = 'IT_DISPLAY'.
FIELDCAT-FIELDNAME = 'CHARGE'.
FIELDCAT-SELTEXT_M = 'Batch number'.
FIELDCAT-OUTPUTLEN = 18.
APPEND FIELDCAT TO IT_FIELDCAT.
CLEAR FIELDCAT.
FIELDCAT-TABNAME = 'IT_DISPLAY'.
FIELDCAT-FIELDNAME = 'LAGERORT'.
FIELDCAT-SELTEXT_M = 'Storage Location'.
FIELDCAT-OUTPUTLEN = 18.
APPEND FIELDCAT TO IT_FIELDCAT.
CLEAR FIELDCAT.
FIELDCAT-TABNAME = 'IT_DISPLAY'.
FIELDCAT-FIELDNAME = 'MJAHR'.
FIELDCAT-SELTEXT_M = 'Material doc. year'.
FIELDCAT-OUTPUTLEN = 18.
APPEND FIELDCAT TO IT_FIELDCAT.
CLEAR FIELDCAT.
FIELDCAT-TABNAME = 'IT_DISPLAY'.
FIELDCAT-FIELDNAME = 'ZEILE'.
FIELDCAT-SELTEXT_L = 'Item in material document'.
FIELDCAT-OUTPUTLEN = 18.
APPEND FIELDCAT TO IT_FIELDCAT.
CLEAR FIELDCAT.
FIELDCAT-TABNAME = 'IT_DISPLAY'.
FIELDCAT-FIELDNAME = 'BUDAT'.
FIELDCAT-SELTEXT_L = 'Posting date in the document'.
FIELDCAT-OUTPUTLEN = 10.
APPEND FIELDCAT TO IT_FIELDCAT.
CLEAR FIELDCAT.
FIELDCAT-TABNAME = 'IT_DISPLAY'.
FIELDCAT-FIELDNAME = 'BKTXT'.
FIELDCAT-SELTEXT_L = 'Document header text'.
FIELDCAT-OUTPUTLEN = 25.
APPEND FIELDCAT TO IT_FIELDCAT.
CLEAR FIELDCAT.
FIELDCAT-TABNAME = 'IT_DISPLAY'.
FIELDCAT-FIELDNAME = 'USNAM'.
FIELDCAT-SELTEXT_M = 'User name'.
FIELDCAT-OUTPUTLEN = 15.
APPEND FIELDCAT TO IT_FIELDCAT.
CLEAR FIELDCAT.
FIELDCAT-TABNAME = 'IT_DISPLAY'.
FIELDCAT-FIELDNAME = 'XBLNR'.
FIELDCAT-SELTEXT_L = 'Reference document number'.
FIELDCAT-OUTPUTLEN = 25.
APPEND FIELDCAT TO IT_FIELDCAT.
CLEAR FIELDCAT.
ENDFORM. " FIELD_CATALOG
*& Form DISPLAY_OUTPUT
text
--> p1 text
<-- p2 text
FORM OUTPUT_DISPLAY.
IF R1 = 'X'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = 'ZRMMPD01A'
IS_LAYOUT = I_LAYOUT
IT_FIELDCAT = IT_FIELDCAT
TABLES
T_OUTTAB = IT_DISPLAY
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
REFRESH IT_DISPLAY.
CLEAR IT_DISPLAY.
ELSEIF R2 = 'X'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = 'ZRMMPD01A'
IS_LAYOUT = I_LAYOUT
IT_FIELDCAT = IT_FIELDCAT
TABLES
T_OUTTAB = IT_FINAL
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
REFRESH IT_DISPLAY.
CLEAR IT_DISPLAY.
ENDIF.
ENDFORM. " DISPLAY_OUTPUT
*& Form SELECT_CONDITION
text
--> p1 text
<-- p2 text
FORM SELECT_CONDITION.
IF R2 = 'X'.
CLEAR WA_DISPLAY.
SORT IT_DISPLAY BY MATNR SERNR MBLNR ZEILE.
DELETE ADJACENT DUPLICATES FROM IT_DISPLAY.
LOOP AT IT_DISPLAY WHERE ZEILE = '0002'.
READ TABLE IT_DISPLAY WITH KEY MATNR = IT_DISPLAY-MATNR
SERNR = IT_DISPLAY-SERNR ZEILE = '0001'.
IF SY-SUBRC = 0.
DELETE IT_DISPLAY.
ENDIF.
ENDLOOP.
SORT IT_DISPLAY BY MATNR SERNR BWART MBLNR.
DELETE ADJACENT DUPLICATES FROM IT_DISPLAY.
LOOP AT IT_DISPLAY.
IF WA_DISPLAY IS INITIAL.
WA_DISPLAY = IT_DISPLAY.
ENDIF.
LOOP AT IT_DISPLAY WHERE MATNR = WA_DISPLAY-MATNR
AND SERNR = WA_DISPLAY-SERNR.
IF IT_DISPLAY-BUDAT > WA_DISPLAY-BUDAT.
WA_DISPLAY = IT_DISPLAY.
ELSE.
DELETE IT_DISPLAY.
ENDIF.
ENDLOOP.
APPEND WA_DISPLAY TO IT_TEMP.
CLEAR WA_DISPLAY.
ENDLOOP.
DELETE ADJACENT DUPLICATES FROM IT_TEMP.
IF NOT IT_TEMP[] IS INITIAL.
IT_FINAL[] = IT_TEMP[].
ENDIF.
ENDIF.
ENDFORM. " SELECT_CONDITION
Regards,
Ashwini -
ALV GRID Display Column Width problem when filtering
Hello All,
When i displaying ALV Grid Display ,i selected one column and set filter for that.
the problem is column width at display is 12 charecters but in filter it is allowing only 10 charecters to enter which is wrong. i am unable to set filter.please give solution.
Thanks
Sandeep.Ghello i am calling perform, ineed to set OUTPUTLEN according to field length how can i do that.
FORM fill_fieldcat USING p_field TYPE slis_fieldcat_alv-fieldname
p_text TYPE slis_fieldcat_alv-seltext_l
p_flag TYPE c.
wa_fieldcat-fieldname = p_field.
wa_fieldcat-seltext_l = p_text.
wa_fieldcat-no_out = p_flag.
wa_fieldcat-outputlen = 20.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat. -
How to change the selected row color in an alv grid display ?
Hello ,
I WANT TO CHANGE THE COLOR OF THE SELECTED RECORDS IN AN ALV GRID DISPLAY ?
ITS URGENT..
WILL BE REWARDED...hai Ssnagh Samala
EXicut This report >
Hope It Will Meet U r Requirement.
If Found Helpfull Reward.
REPORT zcuitest_alv_07.
Use of colours in ALV grid (cell, line and column) *
Table
TABLES : mara.
Type
TYPES : BEGIN OF ty_mara,
matnr LIKE mara-matnr,
matkl LIKE mara-matkl,
counter(4) TYPE n,
free_text(15) TYPE c,
color_line(4) TYPE c, " Line color
color_cell TYPE lvc_t_scol, " Cell color
END OF ty_mara.
Structures
DATA : wa_mara TYPE ty_mara,
wa_fieldcat TYPE lvc_s_fcat,
is_layout TYPE lvc_s_layo,
wa_color TYPE lvc_s_scol.
Internal table
DATA : it_mara TYPE STANDARD TABLE OF ty_mara,
it_fieldcat TYPE STANDARD TABLE OF lvc_s_fcat,
it_color TYPE TABLE OF lvc_s_scol.
Variables
DATA : okcode LIKE sy-ucomm,
w_alv_grid TYPE REF TO cl_gui_alv_grid,
w_docking_container TYPE REF TO cl_gui_docking_container.
PARAMETERS : p_column AS CHECKBOX,
p_line AS CHECKBOX,
p_cell AS CHECKBOX.
START-OF-SELECTION.
PERFORM get_data.
END-OF-SELECTION.
PERFORM fill_catalog.
PERFORM fill_layout.
CALL SCREEN 2000.
*& Module status_2000 OUTPUT
text
MODULE status_2000 OUTPUT.
SET PF-STATUS '2000'.
ENDMODULE. " status_2000 OUTPUT
*& Module user_command_2000 INPUT
text
MODULE user_command_2000 INPUT.
DATA : w_okcode LIKE sy-ucomm.
MOVE okcode TO w_okcode.
CLEAR okcode.
CASE w_okcode.
WHEN 'BACK'.
LEAVE TO SCREEN 0.
ENDCASE.
ENDMODULE. " user_command_2000 INPUT
*& Module alv_grid OUTPUT
text
MODULE alv_grid OUTPUT.
IF w_docking_container IS INITIAL.
PERFORM create_objects.
PERFORM display_alv_grid.
ENDIF.
ENDMODULE. " alv_grid OUTPUT
*& Form create_objects
text
--> p1 text
<-- p2 text
FORM create_objects.
Ratio must be included in http://5..95
CREATE OBJECT w_docking_container
EXPORTING
ratio = 95
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
lifetime_dynpro_dynpro_link = 5
others = 6.
CREATE OBJECT w_alv_grid
EXPORTING
i_parent = w_docking_container.
ENDFORM. " create_objects
*& Form display_alv_grid
text
--> p1 text
<-- p2 text
FORM display_alv_grid.
CALL METHOD w_alv_grid->set_table_for_first_display
EXPORTING
is_layout = is_layout
CHANGING
it_outtab = it_mara
it_fieldcatalog = it_fieldcat
EXCEPTIONS
invalid_parameter_combination = 1
program_error = 2
too_many_lines = 3
OTHERS = 4.
ENDFORM. " display_alv_grid
*& Form get_data
text
--> p1 text
<-- p2 text
FORM get_data.
SELECT * FROM mara UP TO 5 ROWS.
CLEAR : wa_mara-color_line, wa_mara-color_cell.
MOVE-CORRESPONDING mara TO wa_mara.
ADD 1 TO wa_mara-counter.
MOVE 'Blabla' TO wa_mara-free_text.
IF wa_mara-counter = '0002'
AND p_line = 'X'.
Color line
MOVE 'C410' TO wa_mara-color_line.
ELSEIF wa_mara-counter = '0004'
AND p_cell = 'X'.
Color cell
MOVE 'FREE_TEXT' TO wa_color-fname.
MOVE '5' TO wa_color-color-col.
MOVE '1' TO wa_color-color-int.
MOVE '1' TO wa_color-color-inv.
APPEND wa_color TO it_color.
wa_mara-color_cell] = it_color[.
ENDIF.
APPEND wa_mara TO it_mara.
ENDSELECT.
ENDFORM. " get_data
*& Form fill_catalog
text
--> p1 text
<-- p2 text
FORM fill_catalog.
Colour code : *
Colour is a 4-char field where : *
- 1st char = C (color property) *
- 2nd char = color code (from 0 to 7) *
0 = background color *
1 = blue *
2 = gray *
3 = yellow *
4 = blue/gray *
5 = green *
6 = red *
7 = orange *
- 3rd char = intensified (0=off, 1=on) *
- 4th char = inverse display (0=off, 1=on) *
Colour overwriting priority : *
1. Line *
2. Cell *
3. Column *
DATA : w_position TYPE i VALUE '1'.
CLEAR wa_fieldcat.
MOVE w_position TO wa_fieldcat-col_pos.
MOVE 'MATNR' TO wa_fieldcat-fieldname.
MOVE 'MARA' TO wa_fieldcat-ref_table.
MOVE 'MATNR' TO wa_fieldcat-ref_field.
APPEND wa_fieldcat TO it_fieldcat.
ADD 1 TO w_position.
CLEAR wa_fieldcat.
MOVE w_position TO wa_fieldcat-col_pos.
MOVE 'MATKL' TO wa_fieldcat-fieldname.
MOVE 'MARA' TO wa_fieldcat-ref_table.
MOVE 'MATKL' TO wa_fieldcat-ref_field.
Color column
IF p_column = 'X'.
MOVE 'C610' TO wa_fieldcat-emphasize.
ENDIF.
APPEND wa_fieldcat TO it_fieldcat.
ADD 1 TO w_position.
CLEAR wa_fieldcat.
MOVE w_position TO wa_fieldcat-col_pos.
MOVE 'COUNTER' TO wa_fieldcat-fieldname.
MOVE 'N' TO wa_fieldcat-inttype.
MOVE '4' TO wa_fieldcat-intlen.
MOVE 'Counter' TO wa_fieldcat-coltext.
APPEND wa_fieldcat TO it_fieldcat.
ADD 1 TO w_position.
CLEAR wa_fieldcat.
MOVE w_position TO wa_fieldcat-col_pos.
MOVE 'FREE_TEXT' TO wa_fieldcat-fieldname.
MOVE 'C' TO wa_fieldcat-inttype.
MOVE '20' TO wa_fieldcat-intlen.
MOVE 'Text' TO wa_fieldcat-coltext.
APPEND wa_fieldcat TO it_fieldcat.
ENDFORM. " fill_catalog
*& Form fill_layout
text
--> p1 text
<-- p2 text
FORM fill_layout.
Field that identify color line in internal table
MOVE 'COLOR_LINE' TO is_layout-info_fname.
Field that identify cell color in inetrnal table
MOVE 'COLOR_CELL' TO is_layout-ctab_fname.
ENDFORM. " fill_layout
Regards.
Eshwar. -
How change standard field lable in alv grid display
Hi Experts,
How are you doing! I am having some doubts in the alv grid display, I am new to this concepts.
I want to display field lable manually, actually its taking from table field discription but I want to display one field name manually.
example code.
ls_fldcat-fieldname = 'BPKIND'.
ls_fldcat-ref_tabname = 'BUT000'.
ls_fldcat-ref_fieldname = 'BPKIND'.
APPEND ls_fldcat TO lt_fldcat.
ls_fldcat-fieldname = 'PARTNER2'.
ls_fldcat-ref_tabname = 'BUT051'.
ls_fldcat-ref_fieldname = 'PARTNER2'.
Here I dont want to display 'PARTNER2' I need 'KEY ACCOUNT MANAGER'.
Please send me how to do this.
Surya Ramireddy.Hi
Please check out this program.
Type-pools: slis.
Tables: likp.
Data: Begin of i_likp occurs 0,
vbeln like likp-vbeln,
ernam like likp-ernam,
erzet like likp-erzet,
erdat like likp-erdat,
End of i_likp.
Data: it_fieldcat type slis_t_fieldcat_alv,
wa_fieldcat type SLIS_FIELDCAT_ALV,
it_events type slis_t_event.
Selection-screen: Begin of block b1 with frame title text-001.
select-options: s_vbeln for likp-vbeln.
Selection-screen: End of block b1.
start-of-selection.
perform get_sales_header_data.
end-of-selection.
perform field_catalogue.
perform modify_field_catalogue.
perform display_alv_grid_display.
*& Form get_sales_header_data
text
--> p1 text
<-- p2 text
form get_sales_header_data .
select vbeln
ernam
erzet
erdat
into table i_likp
from likp
where vbeln in s_vbeln.
endform. " get_sales_header_data
*& Form field_catalogue
text
--> p1 text
<-- p2 text
form field_catalogue .
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
I_PROGRAM_NAME = sy-repid
I_INTERNAL_TABNAME = 'I_LIKP'
I_INCLNAME = sy-repid
CHANGING
ct_fieldcat = it_fieldcat
EXCEPTIONS
INCONSISTENT_INTERFACE = 1
PROGRAM_ERROR = 2
OTHERS = 3
endform. " field_catalogue
*& Form modify_field_catalogue
text
--> p1 text
<-- p2 text
form modify_field_catalogue .
loop at it_fieldcat into wa_fieldcat.
case wa_fieldcat-fieldname.
when 'VBELN'.
wa_fieldcat-col_pos = 1.
wa_fieldcat-seltext_l = 'Sales Doc Header No'.
wa_fieldcat-emphasize = 'C100'.
when 'ERNAM'.
wa_fieldcat-col_pos = 2.
wa_fieldcat-seltext_l = 'Created By'.
wa_fieldcat-emphasize = 'C200'.
when 'ERZET'.
wa_fieldcat-col_pos = 3.
wa_fieldcat-seltext_l = 'Entry Time'.
wa_fieldcat-emphasize = 'C300'.
when 'ERDAT'.
wa_fieldcat-col_pos = 4.
wa_fieldcat-seltext_l = 'Created On'.
wa_fieldcat-emphasize = 'C400'.
endcase.
modify it_fieldcat from wa_fieldcat.
endloop.
endform. " modify_field_catalogue
*& Form display_alv_grid_display
text
--> p1 text
<-- p2 text
form display_alv_grid_display .
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = sy-repid
IT_FIELDCAT = IT_FIELDCAT
TABLES
t_outtab = i_likp
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
endform. " display_alv_grid_display
Regards
Haritha. -
Problem in placing the background in ALV Grid display
I have created one image of the business flow, and it have to be displayed in the background of ALV grid display.
For this I have gone to T.Code <b>OAER</b> , Given class name as <b>PICTURES</b> , Class type as <b>OT</b> , Object Key <b>BACKGROUND</b>, clicked on the triangle of Standard Doc , then double click on screen, and finally uploaded the background into SAP.
In the function module <b>REUSE_ALV_GRID_DISPLAY</b> I passed this background to the parameter I_BACKGROUND_ID.
It is working fine, and I was able to see the back ground in my program.
(developed in IDES)
But the same is not working in my development client, will some one suggest be the reason for the problem. Please kindly help me out from this problem.hello Dinesh,
I have created the object key in the development client itself and used in the grid display of the same client. i am not understanding where the problem is, any how thank you very much for your responce. if you have any other solution please let me know.
Thank you -
Problem with check box in ALV Grid Display
I am Displaying Material Master Data in ALV Grid Display with Check Box for each record and if i checked check box then i am processing Update operation in Database, my question is after perform update operation check box should be clear.
Kindly help me!!!!Hello Raj
Given the fact that you do not tell us the most important piece of information (namely whether you are using OO-based ALV or not) I assume you are using fm-based ALV lists.
In this case you probably have defined a USER_COMMAND routine as described in the documentation of the fm.
FORM user_command USING r_ucomm LIKE sy-ucomm
rs_selfield TYPE slis_selfield.
* define local data
DATA: ls_outtab LIKE LINE OF gt_outtab,
ld_idx TYPE i.
LOOP AT gt_outtab INTO ls_outtab
WHERE ( chkbox = 'X' ).
ld_idx = syst-tabix.
" Call your update function / method / perform
ls_outtab-chkbox = space.
MODIFY gt_outtab FROM ls_outtab INDEX ld_Idx
TRANSPORTING chkbox.
ENDLOOP.
" And now trigger refresh of the ALV display:
rs_selfield-refresh = 'X'. " <<< !!!
ENDFORM.
Regards
Uwe -
Dump when summing up CURR field in ALV GRID display
Hi All,
I am getting dump when I try to sum the CURR field in my ALV Grid Display. The field is of CURR 23. I am using classes and methods to display alv grid.
I tried passing <fs_fieldcat>-do_sum = 'X'. When I did this, it is dumping without even displaying the alv grid.
Here is the part it is throwing dump:
ls_lvc_data-value = space.
clear ls_lvc_data-style.
loop at it_fcat_local assigning <ls_fcat>
where tech ne 'X' and no_out ne 'X'.
if l_invisible eq 'X'.
clear l_invisible.
if <ls_fcat>-do_sum is initial.
continue.
else.
clear ls_lvc_data-col_pos.
endif.
endif.
add 1 to ls_lvc_data-col_pos.
assign component <ls_fcat>-fieldname
of structure <ls_data> to <l_field_value>.
_if sy-subrc ne 0.
message x000(0k).
endif._
Regards,
GuruThomas,
Here is the dump:
Runtime Errors MESSAGE_TYPE_X
Date and Time 10/22/2010 23:30:53
Short text
The current application triggered a termination with a short dump.
What happened?
The current application program detected a situation which really
should not occur. Therefore, a termination with a short dump was
triggered on purpose by the key word MESSAGE (type X).
Error analysis
Short text of error message:
Long text of error message:
Technical information about the message:
Message class....... "0K"
Number.............. 000
Variable 1.......... " "
Variable 2.......... " "
Variable 3.......... " "
Variable 4.......... " "
How to correct the error
Probably the only way to eliminate the error is to correct the program.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"MESSAGE_TYPE_X" " "
"SAPLSLVC" or "LSLVCF36"
"FILL_DATA_TABLE"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
Source Code Extract
Line
SourceCde
2708
is_subtottxt_info = ls_subtot_info
2709
ip_subtot_line = lr_data
2710
changing
2711
c_subtottxt = l_subtottxt.
2712
ls_lvc_data-value = l_subtottxt.
2713
2714
append ls_lvc_data to ct_lvc_data.
2715
endif.
2716
2717
2718
Column per Fieldcat Entry
2719
2720
ls_lvc_data-value = space.
2721
clear ls_lvc_data-style.
2722
loop at it_fcat_local assigning <ls_fcat>
2723
where tech ne 'X' and no_out ne 'X'.
2724
if l_invisible eq 'X'.
2725
clear l_invisible.
2726
if <ls_fcat>-do_sum is initial.
2727
continue.
2728
else.
2729
clear ls_lvc_data-col_pos.
2730
endif.
2731
endif.
2732
2733
add 1 to ls_lvc_data-col_pos.
2734
2735
assign component <ls_fcat>-fieldname
2736
of structure <ls_data> to <l_field_value>.
2737
if sy-subrc ne 0.
>>>>>
message x000(0k).
2739
endif.
2740
2741
*... work on average
2742
if <ls_fcat>-do_sum eq 'C'.
2743
Initialize average result and entries
2744
<l_field_value> = 0.
2745
clear l_entries.
2746
2747
retrive unit from fieldcatalog
2748
assign space to <l_unit>.
2749
if not <ls_fcat>-cfieldname is initial.
2750
assign component <ls_fcat>-cfieldname
2751
of structure <ls_data> to <l_unit>.
2752
endif.
2753
if not <ls_fcat>-qfieldname is initial.
2754
assign component <ls_fcat>-qfieldname
2755
of structure <ls_data> to <l_unit>.
2756
endif.
2757 -
TO enable the menu button in ALV Grid Display
Hi Mates,
I have a peculiar problem while doing ALV Grid display for screens.
In the main Screen i have Three coloumns.The 1st coloum will interacted
next screen 101 and 2nd coloum will interacted to screen 102.
Now the problem is in the menu of ALV Grid display,the Total button was enabled for screen
101 and same button is disabled in screen 102.
But the code semms to be fine .
Below i have pasted the code and please have a look and help to come out of this cris.
My Code :
FORM CREATE_ALV_GRID USING R_SCREEN.
DATA: LS_LAYOUT TYPE LVC_S_LAYO,
ITAB_FUNCTIONS TYPE UI_FUNCTIONS. "MHTK903257(+)(add)
CASE R_SCREEN.
*--> SCREEN 9000
WHEN C_SCREEN_9000.
*-- Build the field catalog for the ALV grid.
PERFORM BUILD_FIELD_CATALOG TABLES ITAB_FIELDCAT_9000
USING:
*ref_table|fieldname|coltext|hotspot|inttype|outputlen|lzero|just|color
'ITAB_OVERVIEW' 'WADAT' 'Due date'(004) 'X' 'D' ' ' ' ' ' ' 'C100',
*'ITAB_OVERVIEW' 'HU_UNLOAD' 'Unloaded HU'(005) 'X' 'I' '15' ' ' ' ' 'C500', "MHTK903257(-)
'ITAB_OVERVIEW' 'TOT_TO' 'Total TO'(006) 'X' 'I' ' ' ' ' ' ' 'C30',
GMTK901103: REMOVE HOTSPOT ON ESTIMATED TO:
'ITAB_OVERVIEW' 'EST_TO' 'Estim TO'(030) ' ' 'I' ' ' ' ' ' ' 'C500'.
LOOP AT ITAB_INB_LOC WHERE OUTPUT = 'X'.
PERFORM BUILD_FIELD_CATALOG TABLES ITAB_FIELDCAT_9000
USING:
ref_table|fieldname|coltext|hotspot|inttype|outputlen|lzero|just|color
'ITAB_OVERVIEW' ITAB_INB_LOC-FIELDNAME
ITAB_INB_LOC-Z_INBND_LOC 'X' '' ' ' ' ' 'R' 'C500'. "MHTK903418
ENDLOOP.
LOOP AT ITAB_STORAGE_TYPE WHERE OUTPUT = 'X'.
PERFORM BUILD_FIELD_CATALOG TABLES ITAB_FIELDCAT_9000
USING:
*ref_table|fieldname|coltext|hotspot|inttype|outputlen|lzero|just|color
'ITAB_OVERVIEW' ITAB_STORAGE_TYPE-FIELDNAME
ITAB_STORAGE_TYPE-LGTYP 'X' 'I' ' ' ' ' 'R' 'C500'.
ENDLOOP.
*-- Create the ALV grid object.
CREATE OBJECT PT_ALV_1000
EXPORTING
I_PARENT = PT_DOCK_1000.
PERFORM EXCLUDE_FUNCTIONS TABLES ITAB_FUNCTIONS "MHTK903257(+)(add)
USING R_SCREEN.
*-- Get the title of the ALV grid.
PERFORM GET_ALV_GRID_TITLE USING C_SCREEN_1000
CHANGING LS_LAYOUT-GRID_TITLE.
*-- Display the ALV grid.
CALL METHOD PT_ALV_1000->SET_TABLE_FOR_FIRST_DISPLAY
EXPORTING
IS_LAYOUT = LS_LAYOUT
IT_TOOLBAR_EXCLUDING = ITAB_FUNCTIONS
CHANGING
IT_OUTTAB = ITAB_OVERVIEW
IT_FIELDCATALOG = ITAB_FIELDCAT_9000.
*--> SCREEN 9100
WHEN C_SCREEN_1100.
*-- Build the field catalog for the ALV grid.
PERFORM BUILD_FIELD_CATALOG TABLES ITAB_FIELDCAT_1100
USING:
*ref_table|fieldname|coltext|hotspot|inttype|outputlen|lzero|just|color
'ITAB_DETIAL' 'WAUHR' 'Due time'(007) ' ' 'T' ' ' 'X' ' ' 'C100',
'ITAB_DETAIL' 'TOT_TO' 'Total TO'(006) 'X' 'I' ' ' ' ' ' ' 'C30',
'ITAB_DETAIL' 'EST_TO' 'Estim TO'(030) ' ' 'I' ' ' ' ' ' ' 'C500'.
CLEAR ITAB_INB_LOC.
LOOP AT ITAB_INB_LOC WHERE SELECTED = 'X'.
CHECK SY-SUBRC EQ 0.
PERFORM BUILD_FIELD_CATALOG TABLES ITAB_FIELDCAT_1100
USING:
ref_table|fieldname|coltext|hotspot|inttype|outputlen|lzero|just|color
'ITAB_DETAIL' ITAB_INB_LOC-FIELDNAME
ITAB_INB_LOC-Z_INBND_LOC '' '' ' ' ' ' 'R' 'C500'.
ENDLOOP.
CLEAR: ITAB_STORAGE_TYPE.
LOOP AT ITAB_STORAGE_TYPE WHERE SELECTED = 'X'.
CHECK SY-SUBRC EQ 0.
PERFORM BUILD_FIELD_CATALOG TABLES ITAB_FIELDCAT_1100
USING:
*ref_table|fieldname|coltext|hotspot|inttype|outputlen|lzero|just|color
'ITAB_DETAIL' ITAB_STORAGE_TYPE-FIELDNAME
ITAB_STORAGE_TYPE-LGTYP 'X' 'I' ' ' ' ' 'R' 'C500'.
ENDLOOP.
*-- Create the ALV grid object.
CREATE OBJECT PT_ALV_1100
EXPORTING
I_PARENT = PT_DOCK_1100.
PERFORM EXCLUDE_FUNCTIONS TABLES ITAB_FUNCTIONS "MHTK903257(+)(add)
USING R_SCREEN.
*-- Get the title of the ALV grid.
PERFORM GET_ALV_GRID_TITLE USING C_SCREEN_1100
CHANGING LS_LAYOUT-GRID_TITLE.
*-- Display the ALV grid.
CALL METHOD PT_ALV_1100->SET_TABLE_FOR_FIRST_DISPLAY
EXPORTING
IS_LAYOUT = LS_LAYOUT
IT_TOOLBAR_EXCLUDING = ITAB_FUNCTIONS
CHANGING
IT_OUTTAB = ITAB_DETAIL
IT_FIELDCATALOG = ITAB_FIELDCAT_1100.
screen 1300 TO detail.
*--> SCREEN 9300
WHEN C_SCREEN_1300.
*-- Build the field catalog for the ALV grid.
PERFORM BUILD_FIELD_CATALOG TABLES ITAB_FIELDCAT_1300
USING:
*ref_table|fieldname|coltext|hotspot|inttype|outputlen|lzero|just|color
'ITAB_TO2' 'TANUM' 'TO'(020) ' ' 'C' ' ' ' ' ' ' 'C100',
'ITAB_TO2' 'NLPLA' 'Location'(021) ' ' 'C' ' ' ' ' ' ' 'C500',
'ITAB_TO2' 'LETY1' 'SUT'(013) ' ' 'C' ' ' ' ' ' ' 'C500',
'ITAB_TO2' 'MATNR' 'Material'(016) ' ' 'C' ' ' ' ' ' ' 'C500',
'ITAB_TO2' 'NSOLM' 'Quantity'(017) ' ' 'I' ' ' ' ' ' ' 'C500',
'ITAB_TO2' 'NLTYP' 'Storage type'(014) ' ' '' ' ' ' ' ' ' 'C500'. "MHTK903257(-)
*'ITAB_TO2' 'POSNR' 'Line'(015) ' ' 'C' ' ' ' ' ' ' 'C500'. "MHTK903257(-)
*-- Create the ALV grid object.
CREATE OBJECT PT_ALV_1300
EXPORTING
I_PARENT = PT_DOCK_1300.
*-- Exclude the non-applicable functions from the ALV grid.
PERFORM EXCLUDE_FUNCTIONS TABLES ITAB_FUNCTIONS
USING R_SCREEN.
*-- Get the title of the ALV grid.
PERFORM GET_ALV_GRID_TITLE USING C_SCREEN_1300
CHANGING LS_LAYOUT-GRID_TITLE.
SORT ITAB_TO2 BY TANUM VBELN POSNR.
*-- Display the ALV grid.
CALL METHOD PT_ALV_1300->SET_TABLE_FOR_FIRST_DISPLAY
EXPORTING
IS_LAYOUT = LS_LAYOUT
IT_TOOLBAR_EXCLUDING = ITAB_FUNCTIONS
CHANGING
IT_OUTTAB = ITAB_TO2
IT_FIELDCATALOG = ITAB_FIELDCAT_1300.
screen 9400 Pre Processing detail.
*--> SCREEN 9400
WHEN C_SCREEN_9400. "MHTK903418(BEgin Of change)
*-- Build the field catalog for the ALV grid.
PERFORM BUILD_FIELD_CATALOG TABLES ITAB_FIELDCAT_1400
USING:
*ref_table|fieldname|coltext|hotspot|inttype|outputlen|lzero|just|color
'ITAB_PRE_PROC2' 'Z_PRE_PROC' 'Pre Processing Number'(030) ' ' 'C' ' ' ' ' ' ' 'C100',
'ITAB_PRE_PROC2' 'Z_PRE_PROC_LN' 'Pre Processing Number'(035) ' ' 'C' ' ' ' ' ' ' 'C100',
'ITAB_PRE_PROC2' 'MATNR' 'Material'(035) ' ' 'C' ' ' ' ' ' ' 'C500',
'ITAB_PRE_PROC2' 'Z_PSH_QTY' 'Quantity'(035) ' ' 'C' ' ' ' ' ' ' 'C500'.
*'ITAB_TO2' 'MATNR' 'Material'(016) ' ' 'C' ' ' ' ' ' ' 'C500',
*'ITAB_TO2' 'NSOLM' 'Quantity'(017) ' ' 'I' ' ' ' ' ' ' 'C500',
*'ITAB_TO2' 'NLTYP' 'Storage type'(014) ' ' '' ' ' ' ' ' ' 'C500'. "MHTK903257(-)
**'ITAB_TO2' 'POSNR' 'Line'(015) ' ' 'C' ' ' ' ' ' ' 'C500'. "MHTK903257(-)
*-- Create the ALV grid object.
CREATE OBJECT PT_ALV_1400
EXPORTING
I_PARENT = PT_DOCK_1400.
*-- Exclude the non-applicable functions from the ALV grid.
PERFORM EXCLUDE_FUNCTIONS TABLES ITAB_FUNCTIONS
USING R_SCREEN.
*-- Get the title of the ALV grid.
PERFORM GET_ALV_GRID_TITLE USING C_SCREEN_1400
CHANGING LS_LAYOUT-GRID_TITLE.
SORT ITAB_PRE_PROC2 BY Z_PRE_PROC.
*-- Display the ALV grid.
CALL METHOD PT_ALV_1400->SET_TABLE_FOR_FIRST_DISPLAY
EXPORTING
IS_LAYOUT = LS_LAYOUT
IT_TOOLBAR_EXCLUDING = ITAB_FUNCTIONS
CHANGING
IT_OUTTAB = ITAB_PRE_PROC2
IT_FIELDCATALOG = ITAB_FIELDCAT_1400. "MHTK903418(End of change)
ENDCASE.Hi
U copy from standard program and paste ur report ...It will work..'
Regards:
Prabu -
Hi,
I used ALV grid display to generate a report, the end-user will select a record from the report and press a push button so that the value will be changed automatically and will be reflected in the alv.
I have done this by recalling the alv function module. The problem is when alv FM is recalled the changed data is displayed in a new screen and when i select to GO BACK by pressing [ F3 ] im getting the old alv display screen, but i want the controll to go to the selection screen. Please help me to fix this,
Points will be awarded for helpful replies,
Regds,
Sarath.Crefer to this sample - I ve just written and is working -
*& Report ZSKC_TEST4
REPORT ZSKC_TEST4.
TYPE-POOLS : SLIS.
DATA : ITAB LIKE T100 OCCURS 0 WITH HEADER LINE.
DATA : G_REPID TYPE SY-REPID.
START-OF-SELECTION.
SELECT * UP TO 10 ROWS
FROM T100
INTO TABLE ITAB
WHERE SPRSL = SY-LANGU.
CHECK SY-SUBRC EQ 0.
G_REPID = SY-REPID.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = G_REPID
I_CALLBACK_PF_STATUS_SET = 'SUB_PF_STAT'
I_CALLBACK_USER_COMMAND = 'SUB_USER_CMD'
I_STRUCTURE_NAME = 'T100'
TABLES
T_OUTTAB = ITAB[]
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
ENDIF.
FORM SUB_USER_CMD USING r_ucomm LIKE sy-ucomm
rs_selfield TYPE slis_selfield.
CHECK R_UCOMM EQ 'PROC'.
*Insert 2 blank lines.
append itab.
append itab.
RS_SELFIELD-REFRESH = 'X'.
ENDFORM.
FORM SUB_PF_STAT USING rt_extab TYPE slis_t_extab.
* Copy from a Standard Prog - SAPLKKBL - STANDARD_FULLSCREEEN.
* USe SE80 and right click on the PF-STAT and copy.
SET PF-STATUS 'PF_ALV'.
ENDFORM. -
Field Catolgue in alv grid display
Hi Abapers,
I need to display the percentage rows with decimals and other rows without decimal . Is their any option in field catalog to do like this. Or tell me any other alternative to achieve this.
sno total col1 col2 col3
1 220 100 20 100
2 320 120 50 150
tot 540 220 70 250
per 40.74 1.87 and so on
or ,
I have two different internal tables how can i put it in one field catalog to pass it to alv grid display.
Regards,
PriyaDon't do total by your self in the Pogram.
in the Fieldcatalog there is an Attribute which will do total & Average .
Enable it so that from one internal table data it self it will do good.
example program
Below is an example ABAP program which will populate a simple internal table(it_ekpo) with data and
display it using the basic ALV grid functionality(including column total). The example details the main
sections of coding required to implement the ALV grid functionality:
Data declaration
Data retrieval
Build fieldcatalog
Build layout setup
REPORT zdemo_alvgrid .
TABLES: ekko.
type-pools: slis. "ALV Declarations
*Data Declaration
TYPES: BEGIN OF t_ekko,
ebeln TYPE ekpo-ebeln,
ebelp TYPE ekpo-ebelp,
statu TYPE ekpo-statu,
aedat TYPE ekpo-aedat,
matnr TYPE ekpo-matnr,
menge TYPE ekpo-menge,
meins TYPE ekpo-meins,
netpr TYPE ekpo-netpr,
peinh TYPE ekpo-peinh,
END OF t_ekko.
DATA: it_ekko TYPE STANDARD TABLE OF t_ekko INITIAL SIZE 0,
wa_ekko TYPE t_ekko.
*ALV data declarations
data: fieldcatalog type slis_t_fieldcat_alv with header line,
gd_tab_group type slis_t_sp_group_alv,
gd_layout type slis_layout_alv,
gd_repid like sy-repid.
*Start-of-selection.
START-OF-SELECTION.
perform data_retrieval.
perform build_fieldcatalog.
perform build_layout.
perform display_alv_report.
*& Form BUILD_FIELDCATALOG
* Build Fieldcatalog for ALV Report
form build_fieldcatalog.
* There are a number of ways to create a fieldcat.
* For the purpose of this example i will build the fieldcatalog manualy
* by populating the internal table fields individually and then
* appending the rows. This method can be the most time consuming but can
* also allow you more control of the final product.
* Beware though, you need to ensure that all fields required are
* populated. When using some of functionality available via ALV, such as
* total. You may need to provide more information than if you were
* simply displaying the result
* I.e. Field type may be required in-order for
* the 'TOTAL' function to work.
fieldcatalog-fieldname = 'EBELN'.
fieldcatalog-seltext_m = 'Purchase Order'.
fieldcatalog-col_pos = 0.
fieldcatalog-outputlen = 10.
fieldcatalog-emphasize = 'X'.
fieldcatalog-key = 'X'.
* fieldcatalog-do_sum = 'X'.
* fieldcatalog-no_zero = 'X'.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'EBELP'.
fieldcatalog-seltext_m = 'PO Item'.
fieldcatalog-col_pos = 1.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'STATU'.
fieldcatalog-seltext_m = 'Status'.
fieldcatalog-col_pos = 2.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'AEDAT'.
fieldcatalog-seltext_m = 'Item change date'.
fieldcatalog-col_pos = 3.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'MATNR'.
fieldcatalog-seltext_m = 'Material Number'.
fieldcatalog-col_pos = 4.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'MENGE'.
fieldcatalog-seltext_m = 'PO quantity'.
fieldcatalog-col_pos = 5.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'MEINS'.
fieldcatalog-seltext_m = 'Order Unit'.
fieldcatalog-col_pos = 6.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'NETPR'.
fieldcatalog-seltext_m = 'Net Price'.
fieldcatalog-col_pos = 7.
fieldcatalog-outputlen = 15.
fieldcatalog-do_sum = 'X'. "Display column total
fieldcatalog-datatype = 'CURR'.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'PEINH'.
fieldcatalog-seltext_m = 'Price Unit'.
fieldcatalog-col_pos = 8.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
endform. " BUILD_FIELDCATALOG
*& Form BUILD_LAYOUT
* Build layout for ALV grid report
form build_layout.
gd_layout-no_input = 'X'.
gd_layout-colwidth_optimize = 'X'.
gd_layout-totals_text = 'Totals'(201).
* gd_layout-totals_only = 'X'.
* gd_layout-f2code = 'DISP'. "Sets fcode for when double
* "click(press f2)
* gd_layout-zebra = 'X'.
* gd_layout-group_change_edit = 'X'.
* gd_layout-header_text = 'helllllo'.
endform. " BUILD_LAYOUT
*& Form DISPLAY_ALV_REPORT
* Display report using ALV grid
form display_alv_report.
gd_repid = sy-repid.
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
i_callback_program = gd_repid
* i_callback_top_of_page = 'TOP-OF-PAGE' "see FORM
* i_callback_user_command = 'USER_COMMAND'
* i_grid_title = outtext
is_layout = gd_layout
it_fieldcat = fieldcatalog[]
* it_special_groups = gd_tabgroup
* IT_EVENTS = GT_XEVENTS
i_save = 'X'
* is_variant = z_template
tables
t_outtab = it_ekko
exceptions
program_error = 1
others = 2.
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endform. " DISPLAY_ALV_REPORT
*& Form DATA_RETRIEVAL
* Retrieve data form EKPO table and populate itab it_ekko
form data_retrieval.
select ebeln ebelp statu aedat matnr menge meins netpr peinh
up to 10 rows
from ekpo
into table it_ekko.
endform. " DATA_RETRIEVAL
gowri
Message was edited by:
Gowri Krishna
Maybe you are looking for
-
Dual external monitor compatibility
I tried asking the Geniuses about running 2 external monitors to my new MacBook Pro. They say it can only be done by buying a video card to insert in the expansion slot. My question is if anybody else is doing this, and if so, what card would be reco
-
Error 132 opening PDF in Acro8 Pro
Hi, all! I'm getting a non-descript Error 132 when attempting to open a PDF on two different workstations with Acro 8 Pro installed, but a workstation with Reader 9 can open it without a problem. The only close reference in searching for error 132
-
How to access Data Guard option in Oracle 10g OEM
Hi All, I have Oracle 10g ENTERPRISE EDITION on Unix envoirement. I want to setup logical standby Database through Data Guard technology. But when I brows through OEM I do not find Link for DATA GUARD???? 1) How to access Data Guard option from oracl
-
Downloaded the new version, I go to upload my ipod and nothing happens. It freezes up my ipod......also, I went and tried to see how to update it manually or automaticially, this is what is posted: When the iPod icon appears in the iTunes window (bel
-
SAP Device typr for HP Color LaserJet CM2320fxi MFP
Hi Experts, What would be the best suited SAP device type for HP Color LaserJet CM2320fxi MFP? Regards, Leela.