ALV Grid works in normal screen but not in modal

Hi,
I'm struggling with an alv control I've created. I need to have it displayed in a modal dialog window. It works fine in a "normal" window but when I change the screen to be modal nothing displays.
Anyone have any ideas or hit this issue before.
Screen is defined in a function group with a custom control.
Classes exist for model / view and ws.
A function module creates classes above and passes a container to the view class which creates an instance of CL_GUI_ALV_GRID. Function module then executes:
call screen 100 starting at 5 5. - ALV doesn't display
Call screen 100. - Works fine

Helps if you populate the custom control after you have called the screen not before !

Similar Messages

Dynamic properties working in "normal KM" but not in XML forms

Hi all,
(EP 6.0 SP13)
I've implemented a Metadata Extension that returns a list of properties. The list is dynamically generated based on the folder the document is located in. I've tested the Metada Extension on both existing documents and new documents and it works fine in "normal" KM scenarios ( Word documents, file uploads, etc.).
The problem arises when I want to use these Dynamic properties in XML forms. I've added my property to a combox in the XML Forms project. When accessing the Metadata Extension from XML forms the resource path is always null. Since all my business logic is based on knowing where in the KM structure the document is, I have a small problem...
If I go to Details->Properties on the xml forms document and accesses my property there, the path is correct..
To get the resource path I use these two methods:
folder = metaContext.getResourcePath();
(for newly created documents)
folder = metaContext.getResource().getParentCollection().getRID().getPath();
(for existing documents)
these are null when calling my Metadata Extension from a XML Form.
Any ideas?
Vegard

Hi Vegard,
Could you post the code that loads/create the property objects dynamically?
Maybe you can post it at this forum Dynamic properties working in "normal KM" but not in XML forms
so I can award you some points.
Thanks in advanced,
André

Works with normal = declaration but not with .add() function call? Why?

I still have some problems in relation to my earlier post:
http://forum.java.sun.com/thread.jspa?threadID=5164571&tstart=0
Help is still warmely appreciated! Thanks already to you Franzis.
So I try to add several JScrollPanes into on Container variable allComponents.
I don't understand why in my program
allComponents = jspane;works but
allComponents.add(jspane);does not.
Same is true for Jpanel objects. In my program
allComponents = panel;works but
allComponents.add(panel);does not. Why is this?
Still I necessarily need to work with a add() function.
So where is the problem?
The whole source code is at:
http://forum.java.sun.com/thread.jspa?threadID=5164571&tstart=0
Message was edited by:
wonderful123
null

I added a response in your original message:
http://forum.java.sun.com/thread.jspa?messageID=9629812
Let's keep to it since splitting things across two posts might be confusing.

G4 iBook works in Safe Mode, but not in regular mode (stuck on blue screen)

14" iBook G4 1.2GHz with 1 gig of RAM.
I recently had an issue with this machine in that the image on the screen would freeze but the cursor would be able to move around. This was narrowed down to an issue with the logic board. I wanted something a little more permanent than a shim, so I sent the board in to have it reballed.
After installing the maching back into my iBook, it seemed to work fine until I applied a software update to the machine.
It was then that I got to experience the first of many kernel panics.
Restarting at different times always brought me to the dialog box which states that the machine needed to be restarted in multiple languages.
Running the Apple Hardware Test off my install disks yielded this error code: 2ATI/2/4:113-xxxxx-125
I have no idea what that means. I do know that just before I got the results of the test, the screen changed to all kinds of colors. It was only for a few seconds and then the results (with the error code) were displayed.
Still, not sure what to do next, I tried resetting the PRAM. I also tried resetting the NVRAM.
I also tried booting up into Safe Mode which actually worked. There were no issues with the machine and everything seemed to be working fine.
When I tried to restart the machine in regular mode, I'm taken to the infamous blue screen and the machine just stays there. When I let the machine stay off overnight, it booted up normal, but after applying the software update, the machine was in kernel panic again.
I've tried running fsck, but nothing changes.
I'm still not sure why it seems to work in Safe Mode but not in regular mode.
I'd appreciate any suggestions or ideas.

Hi,
A couple of the things that are disabled in safe mode are AirPort and non Apple startup items. The easiest thing for you to test is the AirPort card. Shut down and remove the AE card under the keyboard. See if it starts. If it does your AE card is bad. If not, start in safe mode and go to System Preferences>Accounts>youraccount and disable all non Apple startup (LOgin) items by clicking on them and then the minus sign. Restart normally and see if it will start.
John

The screen on my iPhone is frozen and I can access apps through Siri. The touch screen works within the apps but not in the home screen. What do I do?

the screen on my iPhone is frozen and I can access apps through Siri. The touch screen works within the apps but not in the home screen. What do I do?

Have you tried a reset which is similar to a computer restart and is done by pressing and holding the home button and the sleep/wake or on/off button simultaneously until you see the Apple logo and then release?

The scroll function on my mousepad is disabled when viewing a pdf file in firefox version 5.0. The scroll works on the pdf, but not on the other tabs. When the pdf is closed, the scroll function returns to normal. Any ideas?!

The scroll function on my mousepad is disabled when viewing a pdf file in firefox version 5.0. The scroll works on the pdf, but not on the other tabs. When the pdf is closed, the scroll function returns to normal. Any ideas?!

Hey thanx for the help, it worked like a charm.
I think firefox changed the application lay out, as I used to be able to choose my PDF opener from the list at " Adobe Acrobat Forms Document' where I could choose Nitro-PDF reader, but it has now moved all the way to the bottom like you suggested to the obvious place of "Portable Document Format" section.
If someone didn't tell me , I wouldn't have scrolled all the way down to be able to find it... it really should be with all its cousins up the top...
Cheers again..

I use Photoshop Elements 11 to print panoramas. Works for jpeg images but not tiff. Suggestions?

I use Photoshop Elements 11 to print panoramas. It works for jpeg images but not for tiff images. Seems strange because PSE11 manages tiff images in all other processes. Anyone fared better?

Thank you for your trouble.
My images are not usually layered and the particular case I am about to quote, it is not. The dimensions are 10,546 x 2,790 and the image has 16.7 mbs. I use 8 bit colour. When I set up the print screens for tiff, everything is normal until I get to the last screen with the image set upon the photo paper. Then the paper size indicated with the image refuses to budge from the A4 size, so the panorama gets printed on that. I consulted the Adobe chat line and the expert could 't get it to work either. So he came to the conclusion that the tiff capability had not been extended to printing panoramas. In seeking advice, I thought someone might refer me to an updating patch!
Well done! You have confounded the system! I could not find any control that would override the setting.

Two ALV Grids in a single screen are overlapping eachother

Hi,
I have created two ALV grids in a single screen. I have used seperate containers for them.
But on executing them , both the ALV grids are overlapping eachother.
Please give me a solution.

Hi,
IF w_custom_container IS INITIAL.
Creating Object for the Custom Container.
    CREATE OBJECT w_custom_container
      EXPORTING
        container_name              = w_container
      EXCEPTIONS
        cntl_error                  = 1
        cntl_system_error           = 2
        create_error                = 3
        lifetime_error              = 4
        lifetime_dynpro_dynpro_link = 5
        OTHERS                      = 6.
    CASE sy-subrc.
      WHEN 1.
        MESSAGE e054. "CNTL ERROR
      WHEN 2.
        MESSAGE e055. "CNTL SYSTEM ERROR
      WHEN 3.
        MESSAGE e056. "CREATE ERROR
      WHEN 4.
        MESSAGE e057. "LIFETIME ERROR
      WHEN 5.
        MESSAGE e058. "LIFETIME DYNPRO DYNPRO LINK
    ENDCASE.
Creating object for the Splitter Container.
    CREATE OBJECT w_split_container
      EXPORTING
        parent            = w_custom_container
        orientation       = 0
        sash_position     = 30
        with_border       = 2
      EXCEPTIONS
        cntl_error        = 1
        cntl_system_error = 2
        OTHERS            = 3.
    CASE sy-subrc.
      WHEN 1.
        MESSAGE e054. "CNTL_ERROR
      WHEN 2.
        MESSAGE e055. "CNTL_SYSTEM_ERROR
    ENDCASE.
Creating Grid Control.
    CREATE OBJECT w_grid1
      EXPORTING
        i_parent = w_split_container->top_left_container.
    CREATE OBJECT w_grid2
      EXPORTING
        i_parent = w_split_container->bottom_right_container.
Building field catalog for ALV.
Fieldcat for the Detail Record.
    PERFORM build_fieldcat        USING: c_1 c_code c_output c_check
                                          c_comcode c_olength,
                                          c_2 c_fileno c_output c_check
                                          c_filenum c_olength,
                                          c_3 c_dedcod c_output c_check
                                          c_dedcode c_olength,
                                          c_4 c_dedfac c_output c_check
                                          c_dedf c_olength.
FieldCatlog for the Error Records.
    PERFORM build_fieldcat_error USING: c_1 c_pernr c_error c_check
                                          c_person c_olength,
                                          c_2 c_desc c_error c_check
                                          c_descp c_olength.
ALV Display.
    CALL METHOD w_grid1->set_table_for_first_display
EXPORTING
   i_buffer_active               =
   i_bypassing_buffer            =
   i_consistency_check           =
   i_structure_name              =
   is_variant                    =
   i_save                        =
   i_default                     = 'X'
   is_layout                     =
   is_print                      =
   it_special_groups             =
   it_toolbar_excluding          =
   it_hyperlink                  =
   it_alv_graphics               =
   it_except_qinfo               =
   ir_salv_adapter               =
      CHANGING
        it_outtab                     = t_error
        it_fieldcatalog               = t_fieldcat_error
   it_sort                       =
   it_filter                     =
      EXCEPTIONS
        invalid_parameter_combination = 1
        program_error                 = 2
        too_many_lines                = 3
        OTHERS                        = 4
    CASE sy-subrc.
      WHEN 1.
        MESSAGE e076. "invalid parameter combination
      WHEN 2.
        MESSAGE e001. "program error
      WHEN 3.
        MESSAGE e078. "too many lines
    ENDCASE.
    CALL METHOD w_grid2->set_table_for_first_display
EXPORTING
   i_buffer_active               =
   i_bypassing_buffer            =
   i_consistency_check           =
   i_structure_name              =
   is_variant                    =
   i_save                        =
   i_default                     = 'X'
   is_layout                     =
   is_print                      =
   it_special_groups             =
   it_toolbar_excluding          =
   it_hyperlink                  =
   it_alv_graphics               =
   it_except_qinfo               =
   ir_salv_adapter               =
      CHANGING
        it_outtab                     = t_output
        it_fieldcatalog               = t_fieldcat
   it_sort                       =
   it_filter                     =
      EXCEPTIONS
        invalid_parameter_combination = 1
        program_error                 = 2
        too_many_lines                = 3
        OTHERS                        = 4
    CASE sy-subrc.
      WHEN 1.
        MESSAGE e076. "invalid parameter combination
      WHEN 2.
        MESSAGE e001. "program error
      WHEN 3.
        MESSAGE e078. "too many lines
    ENDCASE.
ELSE.
    CALL METHOD w_grid1->refresh_table_display
      EXPORTING
        i_soft_refresh = 'X'.
    CALL METHOD w_grid2->refresh_table_display
      EXPORTING
        i_soft_refresh = 'X'.
ENDIF.
Hope it Helps,
Jayant Sahu.

Windows 8.1 64bit. Webcam works with "Camera" app but not with Skype.

I've spent a few hours googling and trying out various things - all listed below. I give up - any ideas??? OS: Windows 8.1 64bitMemory: 32GBWebCam: Microsoft VX-7000. As per subject - the webcam works with the "Camera" app but not with Skype for desktop or for Modern UI (or the Microsoft Lifecam software for that matter). Already attempted: 1) Uninstall webcam drivers - download latest from microsoft (Windows 7) and install in Windows 7 compatibility mode.2) Close (from taskmgr) anything that looks like it might use Webcam. 3) Run Skype for Desktop in Windows 7 and 8 compatibility modes None of the above work. In Skype for Modern UI the webcam doesn't appear in the drop down in Settings - so I can't even select it. In Skype for desktops (version 6.11.32.102) the webcam is found but instead of image I get "Can't start video. Try closing other programs that might be using your webcam". I see from a bit of googling that various people seem to have the same issue (i.e. Webcam works with Camera app but not Skype) - so I'm hopeful someone has found a workaround / fix to this issue and I've just not had the googling skills to find it Thanks, - Matt Symes

OK - I appear to have resolved the issue. I restricted my google terms to [vx-7000 site:microsoft.com "windows 8.1"] Which uncovered this article: http://support.microsoft.com/kb/933311 I noticed there were a couple of Windows 7 x64 specific registry settings that were mentioned so I checked these and they weren't as per the article. In fact - one of the Registry Keys was already used by other software "AI Charger+" which is some ValueAdd software that came with my motherboard. I uninstalled AI Charger+, uninstalled LifeCam driver. Reinstalled LifeCam driver in Windows 7 compatibility mode. Still not working. I returned to the registry and noticed the settings still differed from the above article. I corrected them (which involved not just amending Data but having to add new Values). I then disabled and reenabled the LifeCam from dvcmgmt.msc I was then able to get video from the webcam in the Skype for Desktop preview screen.

Airplay works for one user but not for another on the same machine

I have the problem where airplay works for one user but not for another and both users are on the same machine. For the user where it does not work, everything appears normal, it's just that there is no sound being transmitted. I have tried restarting the Airport express, restarting iTunes, repairing disk permissions. Any ideas about what can be done to resolve this?

my /etc/group:
root::0:root
bin::1:root,bin,daemon
daemon::2:root,bin,daemon
sys::3:root,bin
adm::4:root,daemon
tty::5:
disk::6:root
lp::7:daemon
mem::8:
kmem::9:
wheel::10:root,hans,ibm,gast
ftp::11:
mail::12:
uucp:x:14:
log::19:root
locate:x:21:
smmsp::25:
http::33:
games::50:
network:x:90:
video:x:91:
audio::92:ibm,gast
optical::93:hal
floppy:x:94:hal
storage:x:95:hal
scanner:x:96:
power:x:98:
nobody::99:
users::100:gast
dbus:x:81:
hans:x:1001:
vboxusers:x:108:hans
policykit:x:1002:
hal:x:82:
kvm:x:78:
nx:x:85:nx
avahi:x:84:
camera:x:97:
gdm:x:1003:
gast:x:1004:

Trouble playing .swf - works offline in browser but not online on website

Hi there,
I'm having trouble displaying a flash .swf file properly on my website: http://dreamriderproductions.com/fun/game-test/
When I view the .swf file locally on Chrome, I get a text box to enter my name and I can click Go and keep playing the game. For some reason, when it's up on the website, there's no text box so I can't progress. Can you?
Background: The game did used to connect to a database, but the upgrade of our website (and relocation of the swf) seems to have broken the database connection. People couldn't progress past the first screen presumable because the information on which city they were in couldn't be submitted to the database. We've got a version of the game with the database connection disabled and so the game should now work - it works locally for me but not on the website!
Any ideas?
Thanks
Sion

The code you have posted is not the same code as used in:
<div id="gallery">
in the link above.
The reason that the Flash is not displaying in FF is that the portion of the code used by FF was omitted. The code currently used on the page only works in IE.
I'm no great fan of the IE conditional statements used in the code you posted so I don't blame you for not using it. But you do need to provide something for FF.... the old, out dated method would be to add and <embed> for FF... here's the newer method..
So either use code you posted above or better yet, get rid of that and replace the current <object> with
<div id="gallery">
<object id="FlashID" data="flash/201.swf" type="application/x-shockwave-flash" width="958" height="242">
   <param name="movie" value="flash/201.swf">
   <param name="quality" value="high" />
     <param name="wmode" value="opaque" />
     <param name="swfversion" value="6.0.65.0"/>
</object>
</div>
Give that a try. Will work in both FF and newer IE versions.
Best wishes,
Adninjastrator

Virtual Screen but not Screen Sharing

Hello all,
I am wondering if there is a way that I can allow a user to log into my machine with a "virtual desktop" but NOT share my screen. Consider the following scenario: Machine A and B both run OS X Lion. Machine A is logged in as user A. Machine B would like to log into their account remotely through screen sharing. Once they are authenticated, they have the option to "Connect to a virtual display" or "Share the display" The challenge is that I would like to allow them to connect to their virtual display but NOT allow them to share the display while I am using it. Is this possible?
To rephrase the question: is it possible to make remote users request permission to share the screen but not to log into their virtual desktop?
Thanks in advance for any help you can offer!!
Bests,
Phil

Hmm, this is not my experience... is it possible that I have something incorrectly configured then? My setup is as follows:
Machine A:
     - Mac OS X Lion 10.7.4
     - User A: Administrator
     - User B: Regular User
Machine B:
     - Mac OS X Lion 10.7.4
Scenario:
     - User A is logged into Machine A
     - From Machine B, select Finder->Go->Connect to Server and enter vnc://address_of_Machine_A
     - Enter credentials of **User B**
I am presented with two options:
     - "Share the Display - 'User A' is using the display"
     - "Connect to a Virtual Display - See your desktop and files"
When I select the latter, everything goes smoothly with the virtual desktop and both users are able to work simultaneously. However, when I select the first option, User B is able to share User A's screen without entering any additional credentials, which represents a serious privacy issue. Any ideas?
Thanks so much in advance for your help!
Phil

My iCloud password is working on iPhone 5s but not working on iPhone 6 anybody help

My iCloud password is working on iPhone 5s but not working on iPhone 6 anybody help

Tony,
My first thought is to make sure that you are actually logged in using the same AppleID on both devices. Many folks share one AppleID for their family's iTunes Store account yet use another personal AppleID to log into iMessage settings and iCloud settings.
To confirm that the AppleID and password you are using is correct I would suggest visiting http://icloud.com and attempting to login there. If you get in, then you know for sure that that is a valid AppleID/password pair.
If that still doesn't reveal the issue then I would try opening Notes app on both iPhones, and then typing your password out where it can be seen clearly. This may reveal if your are typing it differently due to iOS 8 changes in the shift key indicator, or possibly that a screen protector or case is causing your touches to not register the same on both devices.
I hope these suggestions help.

A way to have notifications appear on lock screen but not activate the screen each time I receive one?

Using an iPhone 4 with iOS 5.0.1 I like how I can have my notifications appear on my lock screen (usually for a new email) but dislike how every time I receive a notification, my iPhone screen lights up with the notification. Is there a way to continue receiving notifications on my lock screen but not have the screen illuminate every time I receive one? It's a constant distraction when I am at work, and I like to keep my phone turned face-up on my desk in case I get a call.

No

How do I troubleshoot installation/distribution of a LabVIEW .exe which processes data using Matlab when it works on some computers but not others?

I've been given the unenviable task of troubleshooting and installing/distributing software written by a former co-worker. I've modified the LabVIEW code and built an .exe file. I've successfully installed the Labview .exe file on several computers, but it won't work on some others. What's more baffling is that I installed it successfully on one computer, uninstalled it, and tried reinstalling it with no success. In fact, it's a new error (Dr. Watson for Windows NT application error). It doesn't help that I have different versions of LabVIEW and Matlab on the target computers. Some have LabVIEW 5.1, some
have 5.0, and some don't have it at all. Some have Matlab 5.2, some have 5.3 (R11) and some have 6.0 (R12). It's also not clear to me where the Matlab m files should be located. I'm not sure if it's a LabVIEW Runtime Engine problem, or if it's a Matlab problem. I've also wondered how LabVIEW and Matlab talk to each other. When LabVIEW calls Matlab, it seems that Matlab is running in the background. In other words, clicking on the Matlab Command Window and typing "whos" or any other command/variable doesn't work.

Jay del Rosario wrote:
>
> How do I troubleshoot installation/distribution of a LabVIEW .exe
> which processes data using Matlab when it works on some computers but
> not others?
Poke around zone.ni.com and
http://digital.natinst.com/public.nsf/$$Search/ .
Good luck, Mark

ALV Grid works in normal screen but not in modal

Similar Messages

Maybe you are looking for