ALV LOAD WITH VARIANT

Hi All ,
I am using reuse_alv_list_display.
How to load alv report with a particular variant?
Regards,
Dilip

Hi,
Try this one
CALL_ALV
DATA: VARIANT TYPE DISVARIANT.
VARIANT-REPORT = SY-REPID.
VARIANT-USERNAME = SY-UNAME.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
IT_FIELDCAT = FIELDCAT
IS_VARIANT = VARIANT
I_SAVE = 'U'
TABLES
T_OUTTAB = IALV.
Thanks & Regards,
Judith.

Similar Messages

Alv report with varying number of columns

hi all,
I am new to abap. I am writing this to get a brief idea of what i wanted to do in system.
I have to do a report using alv. The format of the report looks like this.
acc no     acc. name     amt_sum_april   amt_sum_may   amt_sum_june. ............. total_months
the colum amt_sum_ depends on user input period(month interval).
if the user selects 4 to 6 = 3 columns ,if the user selects 4 to 10 = 7 columns
so on.......
Anyone have idea how to do it, because in the
initial structure or itab, the number of columns depends on the user input.. i am stucking here ...
pls help.
thanks and regards
jose

Hi friend,
It's very complicated to do that, I'm sure there's a way to do it but I really don't know it. Once I had a similar requirement and I did something else that solved my problem without making a fussy complicated code. I added a colum MONTH or PERIOD (depending on your requirement) and then I make a subtotal by that column. So you need:
acc no acc. name amt_sum_april amt_sum_may amt_sum_june. ............. total_months
Now you would have:
acc no acc. name    month     amount
In the SORT table, in the sorting condition by MONTH you specify SUBTOTAL = 'X'. So the output will be:
acc no acc. name    month     amount
123123        John      2            100.00
123124        Paul      2            200.00
Month 2                                300.00
123123        John      3            300.00
123124        Paul      3            400.00
123125        Jane      3            100.00
Month 3                                 800.00
123123        John      4            123.54
Month   4                                123.54
Total                                      1223.54
You can change the subtotal text for a more adequate one (if you want). Also if you only need the subtotals you can specify in the layout that only those lines are to be output.
I hope I've helped, I you have any question let me know!
Regards,
Pablo

ALV with variant

HI,
Pls can anybody send me a sample ALV program with variant .
Thx in Advance.

Hi
Simple ALV report
http://www.sapgenie.com/abap/controls/alvgrid.htm
http://wiki.ittoolbox.com/index.php/Code:Ultimate_ALV_table_toolbox
ALV
1. Please give me general info on ALV.
http://www.sapfans.com/forums/viewtopic.php?t=58286
http://www.sapfans.com/forums/viewtopic.php?t=76490
http://www.sapfans.com/forums/viewtopic.php?t=20591
http://www.sapfans.com/forums/viewtopic.php?t=66305 - this one discusses which way should you use - ABAP Objects calls or simple function modules.
2. How do I program double click in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=11601
http://www.sapfans.com/forums/viewtopic.php?t=23010
3. How do I add subtotals (I have problem to add them)...
http://www.sapfans.com/forums/viewtopic.php?t=20386
http://www.sapfans.com/forums/viewtopic.php?t=85191
http://www.sapfans.com/forums/viewtopic.php?t=88401
http://www.sapfans.com/forums/viewtopic.php?t=17335
4. How to add list heading like top-of-page in ABAP lists?
http://www.sapfans.com/forums/viewtopic.php?t=58775
http://www.sapfans.com/forums/viewtopic.php?t=60550
http://www.sapfans.com/forums/viewtopic.php?t=16629
5. How to print page number / total number of pages X/XX in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=29597 (no direct solution)
6. ALV printing problems. The favourite is: The first page shows the number of records selected but I don't need this.
http://www.sapfans.com/forums/viewtopic.php?t=64320
http://www.sapfans.com/forums/viewtopic.php?t=44477
7. How can I set the cell color in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=52107
8. How do I print a logo/graphics in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=81149
http://www.sapfans.com/forums/viewtopic.php?t=35498
http://www.sapfans.com/forums/viewtopic.php?t=5013
9. How do I create and use input-enabled fields in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=84933
http://www.sapfans.com/forums/viewtopic.php?t=69878
10. How can I use ALV for reports that are going to be run in background?
http://www.sapfans.com/forums/viewtopic.php?t=83243
http://www.sapfans.com/forums/viewtopic.php?t=19224
11. How can I display an icon in ALV? (Common requirement is traffic light icon).
http://www.sapfans.com/forums/viewtopic.php?t=79424
http://www.sapfans.com/forums/viewtopic.php?t=24512
12. How can I display a checkbox in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=88376
http://www.sapfans.com/forums/viewtopic.php?t=40968
http://www.sapfans.com/forums/viewtopic.php?t=6919
13. Top-of-page in ALV
selection-screen and top-of-page in ALV
14. ALV Group Heading
http://www.sap-img.com/fu037.htm
How to add list heading like top-of-page in ABAP lists?
http://www.sapfans.com/forums/viewtopic.php?t=58775
http://www.sapfans.com/forums/viewtopic.php?t=60550
http://www.sapfans.com/forums/viewtopic.php?t=16629
Go thru these programs they may help u to try on some hands on
ALV Demo program
BCALV_DEMO_HTML
BCALV_FULLSCREEN_DEMO ALV Demo: Fullscreen Mode
BCALV_FULLSCREEN_DEMO_CLASSIC ALV demo: Fullscreen mode
BCALV_GRID_DEMO Simple ALV Control Call Demo Program
BCALV_TREE_DEMO Demo for ALV tree control
BCALV_TREE_SIMPLE_DEMO
BC_ALV_DEMO_HTML_D0100
Reward points for useful Answers
Regards
Anji

I just installed LV2011 and one dll from my vi won't load with the error "application configuration is incorrect"

I just installed LV2011 and one dll from my vi won't load with the error "application configuration is incorrect", which is Windows lingo for "missing package dependencies". All the computers at my company with 2010 loaded seem to do OK. When I do a Dependencies Walk I get missing Visual C debug dll's missing plus IEshims and wer which both have a whole tree of dependencies missing on my machine. The Windows install is the same "Windows XP version 2002 Service Pack 3" on my PC and the working PC's. So I'm thinking I have to uninstall 2011 and go back to 2010. Is this correct? Those VC debug dll's were installed on the machines with 2010 in them but were not installed in mine.
I've heard the advice to recompile the dll with debug turned off but I don't have access to the source code.
Thanks in advance.

u87 wrote:
Thanks for the reply. This at least tells me that going back to LV2010 is not likely to solve the problem. The missing dll's are:
MFC90D.dll
MSVCR90D.dll
IESHMS.dll
WER.dll
And, once again, IESHMS and WER have other dependencies. So perhaps i need to install the Visual C++ development environment.
IESHIMS.dll is an Internet Explorer DLL that gets usually delay loaded by shdocvw.dll. As delay load it can not cause DLL load errors but only runtime errors. Maybe your DLL has it as direct dependency but that is unlikely since it does not have a documented interface.
WER.dll is Windows error reporting for Vista/Win7.
MFC90D.dll is the Microsoft Foundation classes and MSVCR90D.dll is the MS C runtime library, both as debug variant.
So all the DLLs you mention are actually MS DLLs! You haven't identified the DLL that you try to access in LabVIEW that causes these error messages. IESHIMS and WER are usually delay loaded by any component that needs it and should not likely be used by non MS code.
What is the DLL you try to load into LabVIEW and by whom? Get the provider of that DLL to provide you a non Debug build of the DLL. Installing Visual C on all the machines just to make the DLL load is not a solution, besides that it is likely not legal since I doubt you have that many licenses.
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Here's how to do ALV (OO) with dynamic fcat, int table and editable data

Hi everybody
Here's a more useful approach to ALV grid with OO using dynamic table, data NOT from DDIC, dynamic FCAT and how to get changed lines from the grid when ENTER key is pressed.
It's really not too dificult but I think this is more useful than the ever present SFLIGHT methods from the demos.
This also defines a subclass of cl_gui_alv_grid so you can access the protected attributes / methods of that class.
You don't need to add the class via SE24 -- done fron this ABAP.
When you run it click Edit for the first time.
After editing data press ENTER and the break point should bring you into the relevant method.
Code developed on NW2004S trial version but also works on rel 6.40 on a "Real" system.
The code should work without any changes on any system >=6.40.
All you need to do is to create a blank screen 100 via SE51 with a custom container on it called CCONTAINER1.
The rest of the code can just be uploaded into your system using the SE38 upload facility.
When running the program click on the EDIT button to enable the edit functionality of the grid.
Change your data and when you press ENTER you should get the break-point where you can see the original table and changed rows.
This program is actually quite general as it covers Dynamic tables, building a dynamic fcat where your table fields are NOT in the DDIC, intercepting the ENTER key via using an event, and accessing the protected attributes of the cl_gui_alv_grid by defining a subclass of this class in the abap.
I've seen various questions relating to all these functions but none in my view ever answers the questions in a simple manner. I hope this simple program will answer all these and show how using OO ALV is actually quite easy and people shouldn't be scared of using OO.
Have fun and award points if useful.
Cheers
Jimbo.
<b>PROGRAM zdynfieldcat.
Simple test of dynamic ITAB with user defined (not ddic) fields
Build dynamic fcat
use ALV grid to display and edit.
*When edit mode set to 1 toolbar gives possibility of adding and
*deleting rows.
*Define subclass of cl_gui_alv_grid so we can use protected attributes
*and methods.
Add event handler to intercept user entering data and pressing the
*ENTER key.
When enter key is pressed get actual value of NEW table (all rows)
rather than just the changed data.
*use new RTTI functionality to retrieve internal table structure
*details.
Create a blank screen 100 with a custom container called CCONTAINER1.
James Hawthorne
include <icon>.
define any old internal structure NOT in DDIC
types: begin of s_elements,
       anyfield1(20) type c,
       anyfield2(20) type c,
       anyfield3(20) type c,
       anyfield4(20) type c,
       anyfield5(11) type n,
       end of s_elements.
types: lt_rows type lvc_t_roid.
Note new RTTI functionality allows field detail retrieval
at runtime for dynamic tables.
data:   wa_element type s_elements ,
        wa_data type s_elements,
        c_index type sy-index,
        c_dec2 type s_elements-anyfield5,
        wa_it_fldcat type lvc_s_fcat,
        it_fldcat type lvc_t_fcat,
        lr_rtti_struc TYPE REF TO cl_abap_structdescr,    "RTTI
        lt_comp TYPE cl_abap_structdescr=>component_table,"RTTI
        ls_comp LIKE LINE OF lt_comp,                     "RTTI
        zog like line of lr_rtti_struc->components,      "RTTI
        struct_grid_lset type lvc_s_layo,
        l_valid type c,
        new_table type ref to data.
field-symbols: <dyn_table> type standard table,
               <actual_tab> type standard table,
               <fs1> type ANY,
               <FS2> TYPE TABLE.
data: grid_container1 type ref to cl_gui_custom_container.
class lcl_grid_event_receiver definition deferred.
data: g_event_receiver type ref to lcl_grid_event_receiver.
data: ls_modcell type LVC_S_MODI,
      stab type ref to data,
      sdog type s_elements.      .
class lcl_grid_event_receiver definition.
public section.
    methods:
    handle_data_changed
         for event data_changed of cl_gui_alv_grid
             importing er_data_changed,
       toolbar for event toolbar of cl_gui_alv_grid
                 importing e_object
                           e_interactive,
      user_command for event user_command of cl_gui_alv_grid
                 importing e_ucomm.
endclass.
*implementation of Grid event-handler class
class lcl_grid_event_receiver implementation.
method handle_data_changed.
code whatever required after data entry.
various possibilites here as you can get back Cell(s) changed
columns or the entire updated table.
Data validation is also possible here.
perform check_data using er_data_changed.
endmethod.
Method for handling all creation/modification calls to the toolbar
method toolbar.
    data : ls_toolbar type stb_button.
Define Custom Button in the toolbar
    clear ls_toolbar.
    move 0 to ls_toolbar-butn_type.
    move 'EDIT' to ls_toolbar-function.
    move space to ls_toolbar-disabled.
    move 'Edit' to ls_toolbar-text.
    move icon_change_text to ls_toolbar-icon.
    move 'Click2Edit' to ls_toolbar-quickinfo.
    append ls_toolbar to e_object->mt_toolbar.
    clear ls_toolbar.
    move 0 to ls_toolbar-butn_type.
    move 'UPDA' to ls_toolbar-function.
    move space to ls_toolbar-disabled.
    move 'Update' to ls_toolbar-text.
    move icon_system_save to ls_toolbar-icon.
    move 'Click2Update' to ls_toolbar-quickinfo.
    append ls_toolbar to e_object->mt_toolbar.
    clear ls_toolbar.
    move 0 to ls_toolbar-butn_type.
    move 'EXIT' to ls_toolbar-function.
    move space to ls_toolbar-disabled.
    move 'Exit' to ls_toolbar-text.
    move icon_system_end to ls_toolbar-icon.
    move 'Click2Exit' to ls_toolbar-quickinfo.
    append ls_toolbar to e_object->mt_toolbar.
endmethod.
method user_command.
    case e_ucomm .
      when 'EDIT'.          "From Tool bar
        perform set_input.
         perform init_grid.
      when 'UPDA'.          "From Tool bar
        perform refresh_disp.
        perform update_table.
      when 'EXIT'.          "From Tool bar
        leave program.
    endcase.
endmethod.
endclass.
class zcltest definition inheriting from cl_gui_alv_grid.
define this as a subclass so we can access the protected attributes
of the superclass cl_gui_alv_grid
public section.
methods: constructor, disp_tab.
endclass.
need this now to instantiate object
as we are using subclass rather than the main cl_gui_alv_grid.
class zcltest implementation.
METHOD constructor.
CALL METHOD super->constructor
        exporting i_appl_events = 'X'
           i_parent = grid_container1.
endmethod.
method disp_tab.
FIELD-SYMBOLS: <outtab> TYPE STANDARD TABLE.
break-point 1.
mt_outtab is the data table held as a protected attribute
in class cl_gui_alv_grid.
ASSIGN me->mt_outtab->* TO <outtab>. "Original data
do whatever you want with <outtab>
contains data BEFORE changes each time.
Note that NEW (Changed) table has been obtained already by
call to form check_data USING P_ER_DATA_CHANGED
         TYPE REF TO CL_ALV_CHANGED_DATA_PROTOCOL.
Entered data is in table defined by <fs2>
In this method you can compare original and changed data.
Easier than messing around with individual cells.
do what you want with data in <fs2> validate / update / merge etc
endmethod.
endclass.
data :
    ok_code like sy-ucomm,
    save_ok like sy-ucomm,
    i4 type int4,
Container Object [grid_container]
now created via method constructor
in the subclass zcltest.
Control Object [grid]
grid1 type ref to zcltest,
Event-Handler Object [grid_handler]
grid_handler type ref to lcl_grid_event_receiver.
start-of-selection.
call screen 100.
module status_0100 output.
now display it as grid
if grid_container1 is initial.
    create object grid_container1
        exporting
          container_name = 'CCONTAINER1'.
    create object grid1.
     break-point 1.
    create object grid_handler.
    set handler:
       grid_handler->user_command for grid1,
       grid_handler->toolbar for grid1,
       grid_handler->handle_data_changed for grid1.
perform create_dynamic_fcat.
perform create_dynamic_itab.
perform populate_dynamic_itab.
perform init_grid.
perform register_enter_event.
set off ready for input initially
i4 = 0.
call method grid1->set_ready_for_input
         exporting
           i_ready_for_input = i4.
endif.
endmodule.
module user_command_0100 input.
*PAI not needed in OO ALV anymore as User Commands are handled as events
*in method user_command.
*we can also get control if the Data entered and the ENTER is pressed by
*raising an event.
Control then returns to method handle_data_changed.
endmodule.
form create_dynamic_fcat.
get structure of our user table for building field catalog
Use the RTTI functionality
lr_rtti_struc ?= cl_abap_structdescr=>describe_by_data( wa_data ).
Build field catalog just use basic data here
colour specific columns as well
loop at lr_rtti_struc->components into zog.
c_index = c_index + 1.
clear wa_it_fldcat.
wa_it_fldcat-fieldname = zog-name .
wa_it_fldcat-datatype = zog-type_kind.
wa_it_fldcat-inttype =   zog-type_kind.
wa_it_fldcat-intlen =    zog-length.
wa_it_fldcat-decimals = zog-decimals.
wa_it_fldcat-lowercase = 'X'.
if c_index eq 2.
wa_it_fldcat-emphasize = 'C411'.
     endif.
    if c_index eq 3.
wa_it_fldcat-emphasize = 'C511'.
   endif.
append wa_it_fldcat to it_fldcat .
endloop.
endform.
form create_dynamic_itab.
Create dynamic internal table and assign to field sysmbol.
Use dynamic field catalog just built.
call method cl_alv_table_create=>create_dynamic_table
             exporting
                it_fieldcatalog = it_fldcat
             importing
                ep_table        = new_table.
assign new_table->* to <dyn_table>.
endform.
form populate_dynamic_itab.
load up a line of the dynamic table
c_dec2 = c_dec2 + 11.
wa_element-anyfield1 = 'Tabbies'.
wa_element-anyfield2 = 'ger.shepards'.
wa_element-anyfield3 = 'White mice'.
wa_element-anyfield4 = 'Any old text'.
wa_element-anyfield5 = c_dec2.
append wa_element to <dyn_table>.
endform.
form check_data USING P_ER_DATA_CHANGED
           TYPE REF TO CL_ALV_CHANGED_DATA_PROTOCOL.
Get altered data back
ASSIGN   p_er_data_changed->mp_mod_rows TO <FS1>.
stab =       p_er_data_changed->mp_mod_rows.
ASSIGN STAB->* TO <FS2>.
LOOP AT <FS2> INTO sdog.
ALV grid display with altered data is now in <fs2>.
do any extra processing you want here
endloop.
now display new table
call method grid1->disp_tab.
endform.
form exit_program.
call method grid_container1->free.
call method cl_gui_cfw=>flush.
leave program.
endform.
form refresh_disp.
call method grid1->refresh_table_display.
endform.
form update_table.
The dynamic table here is the changed table read from the grid
after user has changed it
Data can be saved to DB or whatever.
loop at <dyn_table> into wa_element.
do what you want with the data here
endloop.
switch off edit mode again for next function
i4 = 0.
call method grid1->set_ready_for_input
      exporting
          i_ready_for_input = i4.
endform.
form set_input.
i4 = 1.
call method grid1->set_ready_for_input
     exporting
       i_ready_for_input = i4.
endform.
form switch_input.
if i4 = 1.
i4 = 0.
else.
i4 = 1.
endif.
call method grid1->set_ready_for_input
     exporting
       i_ready_for_input = i4.
endform.
form init_grid.
Enabling the grid to edit mode,
     struct_grid_lset-edit = 'X'. "To enable editing in ALV
     struct_grid_lset-grid_title = 'Jimbos Test'.
     call method grid1->set_table_for_first_display
       exporting
         is_layout           = struct_grid_lset
       changing
         it_outtab             = <dyn_table>
         it_fieldcatalog       = it_fldcat.
endform.
form register_enter_event.
call method grid1->register_edit_event
               exporting
                  i_event_id = cl_gui_alv_grid=>mc_evt_enter.
Instantiate the event or it won't work.
create object g_event_receiver.
set handler g_event_receiver->handle_data_changed for grid1.
endform.</b>

Hi there
IE7 doesn't give me the add new page option and I get 404 error when trying to access the "How to contribute" section.
I'll load up Firefox later (this browser usually works when IE7 doesn't always work properly).
I'll copy the stuff to the wiki when I've got the browser sorted out.
Cheers
jimbp

OO ALV grid with a header line is this possible?

Howdy!
I have a requirement where I need to produce an ALV grid with the following format:
<b>Text 1     Text 2 Text 3                  Text 4
                          Text 6
Col_1 Col_2 Col_3 Col_4 Col_5 Col_6 Col_7 Col_8 Col_9
Cell conents -
Cell conents -
Cell conents -
Cell conents -
Cell conents -
</b>
Anyone got any idea on how to get the 'TEXT' fields into the ALV grid? These are dynamic texts that would basically display details of data entered in the selection screen.
The ALV title line is limited to 70 characters and I can't think of another way of doing this.
The texts need to appear on the ALV grid becasue the user would like to download them to Excel in addition to the ALV cell contents using the standard ALV functionality.
Any ideas would be appreciated!
Message was edited by: Robert

I'm thinking that this may not work because it is not a full screen grid and the grid container does not care about the container on top of it so, it most likely would not print it.   Implement this example program, you can see how this would work for you if you were using the FM.
report zrich_0001
       no standard page heading.
* Global ALV Data Declarations
type-pools slis.
data: begin of i_alv occurs 0,
      matnr type mara-matnr,
      end of i_alv.
* Miscellanous Data Declarations
data: fieldcat type slis_t_fieldcat_alv,
      events   type slis_t_event,
      list_top_of_page type slis_t_listheader,
      top_of_page type slis_formname value 'TOP_OF_PAGE'.
start-of-selection.
perform initialization.
perform get_data.
perform call_alv.
end-of-selection.
* Form Initialization
form initialization.
clear i_alv.       refresh i_alv.
perform eventtab_build using events[].
endform.
* Form Get_Data
form get_data.
select matnr into table i_alv
              from mara up to 100 rows.
endform.
* CALL_ALV
form call_alv.
data: variant type disvariant.
data: repid type sy-repid.
repid = sy-repid.
variant-report = sy-repid.
variant-username = sy-uname.
perform build_field_catalog.
perform comment_build using list_top_of_page[].
* Call ABAP List Viewer (ALV)
call function 'REUSE_ALV_GRID_DISPLAY'
       exporting
            it_fieldcat        = fieldcat
            i_callback_program = repid
            is_variant         = variant
            it_events          = events[]
            i_save             = 'U'
       tables
            t_outtab           = i_alv.
endform.
* EVENTTAB_BUILD
form eventtab_build using events type slis_t_event.
* Registration of events to happen during list display
data: tmp_event type slis_alv_event.
call function 'REUSE_ALV_EVENTS_GET'
       exporting
            i_list_type = 0
       importing
            et_events   = events.
read table events with key name = slis_ev_top_of_page
                           into tmp_event.
if sy-subrc = 0.
    move top_of_page to tmp_event-form.
    append tmp_event to events.
endif.
endform.
* BUILD_FIELD_CATALOG
form build_field_catalog.
clear: fieldcat. refresh: fieldcat.
data: tmp_fc type slis_fieldcat_alv.
tmp_fc-reptext_ddic = 'Material'.
tmp_fc-fieldname    = 'MATNR'.
tmp_fc-tabname      = 'I_ALV'.
tmp_fc-outputlen    = 18.
append tmp_fc to fieldcat.
endform.
* COMMENT_BUILD
form comment_build using list_top_of_page type
                                        slis_t_listheader.
data: tmp_line type slis_listheader.
clear tmp_line.
tmp_line-typ = 'H'.
tmp_line-info = 'Here is a line of text'.
append tmp_line to list_top_of_page.
clear tmp_line.
tmp_line-typ = 'S'.
tmp_line-key = 'Key1'.
tmp_line-info = 'Here is a value'.
append tmp_line to list_top_of_page.
clear tmp_line.
tmp_line-typ = 'S'.
tmp_line-key = 'Key2'.
tmp_line-info = 'Here is another value'.
append tmp_line to list_top_of_page.
endform.
* TOP_OF_PAGE
form top_of_page.
call function 'REUSE_ALV_COMMENTARY_WRITE'
       exporting
            i_logo             = 'ENJOYSAP_LOGO'
            it_list_commentary = list_top_of_page.
endform.
Regards,
Rich Heilman

Calling an R3 Transaction with Variant

Hi there
I have just been told that part of our requirements for EP will be to use variants when accessing R3 reports from EP. I will be told the Transaction Code, and the variant, and it would be nice if I could execute the report with that variant as the iview loads.
I have found a couple of posts which talk about using tcode START_REPORT, and then D_SREPOVARI-REPORT=<REPORTNAME> & D_SREPOVARI-VARIANT = <VARIANTNAME> in the application parameters, but the problem is all this does is load the variant ... it doesn't actually process the first screen, even if I set the option PROCESS FIRST SCREEN to yes.
I see from the posts that I can create a new report, which calls the required report with the required variant. Is there no other, simpler, way of doing this?
Any information would be greatly appreciated.

You're probably missing parameter: D_SREPOVARI-NOSELSCRN=X

Default collapsed view in ALV grid with subtotoal lines

Hallo experts,
I am displaying a ALV grid with subtotals. Now my requirement to display the Grid with only subtotal lines. Means the grid should be displayed in collapsed mode by default.
Can any you help me finding this option.
Thanks.
Matt.

Hallo experts,
I am displaying a ALV grid with subtotals. Now my requirement to display the Grid with only subtotal lines. Means the grid should be displayed in collapsed mode by default.
Can any you help me finding this option.
Thanks.
Matt.
Hi Matt,
Whe you call the FM REUSE_ALV_GRID_DISPLAY, you have to fill the table it_sort.
In this table, you have to fill the field FIELDNAME with the field that you can show with susbstotals and fill the field EXPA with 'X'.
W_SORT-SPOS = 1.
W_SORT-FIELDNAME = 'CODIGO'.
W_SORT-SUBTOT = 'X'.
W_SORT-EXPA = 'X'.
APPEND W_SORT TO IT_SORT.
In the fieldcatalog there must be any with the field DO_SUM = 'X'
You can maka this directly in the list by creating a variant with susbtotals, colapse them and save as a default variant for all users.
Regards,
Pepe
Regards,
Pepe

.vi loaded with errors on the target and was closed

When I intend to run my RT (communicating with an FPGA on a cRIO) it only runs one time. The second trial leads to the following error:
NI_AALBase.lvlibine Wave.vi loaded with errors on the target and was closed.
LabVIEW: Failed to load shared library lvanlys.*ineWaveCIN:C on RT target device.
After reseting the FPGA and Labview it runs again, but also only for one time.
Thanks for solutions!
Thomas Vogl

Error 'found'.
Process (one day working on it!):
1- 'Disabled' .vi cutting it into small pieces.
2- Locate code that provokes 'not defined error' by enabling and running.
3- Finally located.
My case:
I've designed a communication system. To send data uses a PDU containing a 'variant' and 'ring'. This ring indicates type of data to convert variant with necessary typedef. The system defines 4 default msgs on ring (NULL, ACK, NACK, PING).
The receptor works well, but as I have a lot of data types, I need a case structure. (rings do not work with case at least on 2011) Then I do next thing:
Explicit cast to a typedef enum with all my data values... (This system is designed for our purposes and could not be the better solution)
... UNDEFINED ERROR ON PXI ...
Solution:
Instead using explicit typecast use "coercion dot" casting. Like here.
I receive an U16 data that PXI cast to my enum on 'data out' indicator (you can't see coercion dot because pink and red are 'very different' colors)
No more errors.
Conclusions:
Labview has issues working with explicit type-casting to enums. I can't work more on it, but is necessary to debug this kind of issues because can affect projects at last steps of the development and drives LVdevelopers crazy.
The only think I do with the enumeration is to add new element and all the system fails...
Thank you for your reply Schmitz!
I hope that this information could help somebody that in the future needs to investigate how LV works... xD
Probably this is not the only issue related with ".vi loaded with errors on the target" (known as the "well defined error").
Cheers

Problems with bill copying control and materials with variant configuration

Hi experts,
I have a problem with a bill copying control and the way that my customer is trying to create and print the Bill (VF01).
Let me explain...They have in a Sales Order a material with variant configuration per position, each one can have many characteristics. This characteristics must be printing on the billing document, creating different bills 'coz the max. lines number is 18, so the bill must change page per material-characteristics.
Example:
Max. Number Lines = 3
Position 10
Material A
     -Characteristic A
     -Characteristic B
     -Characteristic C     (Bill 1)
     -Characteristic D
     -Characteristic E
     -Characteristic F     (Bill 2)
Position 20
Material B
     -Characteristic A     (Bill 3) counting characteristics upside
     -Characteristic B
     -Characteristic C
     -Characteristic D     (Bill 4)
I created on Tx VOFM (Data Transfer-Billing documents) a routine trying to control this jump, but my problem is when I'm creating the Bill document (VF01) this work only by position, the debugging enter per position.. so I don't have any control to tell the program must count the characteristics and create another bill.
So... Somebody can help me..or have any idea to solve this problem.....
Thxs a lot!!!!
Diego Helfer

HI Diego
For our coming assignment, we do have similar sort of situation. Currently we are in Requirements Gathering phase.
Though we do not have Variant Configuration in place, we do have restriction for no..of items to be used for printing in Billing Documents.
Current proposal is that we will restrict at Sales Order Creation. If the number of items are increasing, we will restrict saving the document and loading has to be done again. As itz better to restrict at initial phase.
Our schema is One Sales Order -> One Delivery -> One Billig Document.
   Will post if we can manage to acheive some other way and do request you the same.
Kind Regards
Eswar

Help! (please :) I have a 1GB iPod that's loaded with music for which my computer can no longer find the original files-due to external mass storage crash during recent move. Is there a way to import iPod music back into my iTunes library on computer???

Help! (please I have a 1GB iPod that's loaded with music for which my computer can no longer find the original files-due to external mass storage crash during recent move. Is there a way to import iPod music back into my iTunes library on computer???

Or If there is any purchased music then you can try to transfer purchases
http://support.apple.com/kb/ht1848
If you're in the US you can reload purchased music
http://support.apple.com/kb/ht2519

Cube loaded with data, but unavailable in the query

Hello everyone,
Someone can help me?
I created a new Cube CO-PA for the year 2010, and loaded with data this year. To make sure that the data were correct did a ListCube, with all the filter equal to the query, and indeed the data is loaded properly for this year. And when i run the query with data from the years 2008 and 2009 show me data in my report, but when I run the query for 2010, the query displays an error message saying that "no data".
How is it possible to have the correct data in the Cube, and i can not view the data in the query?
Note: The request in the cube is available to report
Thank you all,
Greetings,
Maria João
30-Março 2010

Hello,
I was in trouble because I had not selected the key figures in the multicube : S
After selecting the key figures, I ran the query and it had data.
Thank you for your help.
Sincerely,
Maria Joã

While Creating Trasnsaction not taking variant in 'Start With Variant'

I am trying to create a transaction for report with variant created through se38 (while creating report). but when I give variant name in 'Start with Variant '.
and try to save it, it gives message 'No System Variant chosen for nonlocal objects'.
How can I create transaction with variant

HI
I have created a Tcode in SE93 as u sain using the varints.
in clint 300
1.in se93 main screen ihanve enter ZXX_TEST name then pressed create button.
2. then next screen i have selected the 2nd radiobutton(program and selection screen).
3.In Program filed I hve given program name.
4. in START with variant I have given variant name AA.. this is existed in Clint 320, but not existed in Clint 300).
5. if i run this in clint 300 it gives me error because variant AA is not existed in the Clien 300.
6. If i run this in Client 320.. then it is runnig with variant AA.
The variant u r using is not existed...
Check the Vairint is existed or not.. where u r running this.
Please Close this thread.. when u r problem is solved
Reward if Helpful
Regards
Naresh Reddy K

Create transaction with variant not working

Hello!
Here's my issue -- I have a program that, right now, is more of a shell than anything else. It is to access the HR Logical Database PNPCE, and to help filter the data I pull back, I created a Selection View with a couple of additional fields. I put the necessary values in these fields and saved it as a Variant.
All I want to do is create a transaction to run my program and start it using my Variant to fill in these additional fields. Using SE93, I can create a plain transaction with no problem. However, if I click the "Start with variant" drop-down field, I get a response that says screen 1000 (my default Selection Screen) has no variants.
At first we thought there was some client-side things needing configuration, but if I go create a quick-and-dirty program with a single Selection Screen value (no Selection View) and a Variant, SE93 sees the variant with no problems. So I'm wondering if maybe it has something to do with the fact that I'm using a Selection View. Unfortunately, I'm so new to ABAP, I'm completely stuck on how to proceed.
Any suggestions? Thank you so much!

Saquib, thank you SO much! You're right -- that worked.
As a relative newbie to SAP R/3 and ABAP, I'm new to little quirks like this. In other examples, the list (F4) does show the variants. For some reason, this one didn't. I entered it anyway, saved, and ran the transaction, and it popped up with the fields populated from the variant.
Again, kudos and thank you so much. Points duly awarded.

Display amount in ALV Grid with different Decimal Places based on Currency

HI Experts,
Working with ALV Report i have one Amount field NETWR which is having Length 15 and Decimal Places 2.
we have two different types of currency's AED and KWD and AED having 2 decimal Places and KWD having 3 decimal places.
im using FM: REUSE_ALV_GRID_DISPLAY for Display. value storing in Table was like this
AED---22.56
KWD---225.65
i need to display values like AED : 22.56

HI Experts,
Working with ALV Report i have one Amount field NETWR which is having Length 15 and Decimal Places 2. we have two different types of currency's AED and KWD and AED having 2 decimal Places and KWD having 3 decimal places.
im using FM: REUSE_ALV_GRID_DISPLAY for Display. value storing in Table was like this
AED---22.56
KWD---225.65 (converting this value to 22.565 using BAPI_CURRENCY_GETDECIMALS according to currency in my Report)
i need to display values like AED : 22.56
KWD---22.565 but here field is NETWR with 2 decimal.
Need to Display amount in ALV Grid with different Decimal Places based on Currency
Regards,
Dileep Kumar Reddy

ALV LOAD WITH VARIANT

Similar Messages

Maybe you are looking for