ALV multiple lists: Set tab focus

Hi,
I have a report that is producing 4 ALV lists on a screen, each of which is output in its own subscreen.
However, what I need to be able to do is set the tab focus based on the data selected.
ie. If no data is found to display in subscreen 1, I want to be able to show subscreen 2 as the initial screen and so on.
Is it possible to set the tab in this way ?
Cheers
Colin.

Hi Everyone,
I don't know if you were aware of this but Serdar has written a very good reference booklet on ALV grid and its available on:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/documents/a1-8-4/an easy reference for alv grid control.pdf
I'm sure many of us will find this a useful aid to keep on our desks
Nice one Serdar!
Best Regards,
Hafeez

Similar Messages

How to set the focus on the new added line in ALV list (OO)

Dear Friends,
I have an ALV list based on OO(using alv_grid->set_table_for_first_display), when I click the 'new' button to add a new line, the mouse arrow is always pointing to the first line - not the new created line for user to input!!.
So how to set the focus (mouse arrow) on the new added line in ALV list for user to input it friendly?
Thanks a lot!!

Hello,
To get the selected line row first we have get all the rows in the internal table.
When u click on the button when it is creating the new line we have to pass the row number to the call method
CALL METHOD <ref.var. to CL_GUI_ALV_GRID > ->get_selected_rows
   IMPORTING
      ET_INDEX_ROWS =   <internal table of type LVC_T_ROW > (obsolete)
      ET_ROW_NO      =   <internal table of type LVC_T_ROID > .
CALL METHOD<ref.var. to CL_GUI_ALV_GRID>->set_selected_rows
   EXPORTING
      IT_ROW_NO = <internal table of type LVC_T_ROID>
   or alternatively
   IT_INDEX_ROWS = <internal table of type LVC_T_ROW>
      IS_KEEP_OTHER_SELECTIONS = <type CHAR01>.
http://help.sap.com/saphelp_erp2004/helpdata/EN/22/a3f5ecd2fe11d2b467006094192fe3/content.htm

How to set the focus to the tabbed pane title?

Dear Friends,
I'm using tabbed pane (JTabbedPane) in my application. I have 2 tabbed panes and each contain some text fields and buttons.
In first tabbed, I have 2 text fields, OK and Cancel buttons. I have to set the focus to the title of the tabbed pane after it lost focus from the Cancel button (focus has to move from Cancel button to tabbed pane title by pressing tab key).
Could anyone please tell me how to set the focus to the tabbed pane title?
Thanks in advance,
Sathish kumar D

Thanks for your reply.
Could you please tell me how to set focus for title of the tabbed pane throug FocusTraversalPolicy?
because usually we set the focus for the component by requestFocusInWindow().
for example set focust to the button OK,
btnOk.requestFocusInWindow()likewise could you tell me how to set focus to Title of the tabbed pane?
Sathish kumar D

Multiple Hotspots handling in ALV Block List

Hello All,
This is my fisrt thread in the SDN though I am wokring in SAP area from past 5 years.
Some business background of te block list report.
Mine reprot is completing the flow of SD .
first block displays the SO items.
second block displays the Billing Information
Third Block displays the Shippinng Information.
Now comes to the problem.
I have come accross a strange situation in the ALV Block list hotspot handling.
In the first report the i want to have the hotspot for two columns.
1. SO Document (VBAK-VBELN) and Materials status(MARA-MSTAE).
In the User_command problem is
slis_selfield is not retruning the field name (slis_selfield-fieldname) please can any body tell about this.
see why I need this information is
based on the field I want to decide the flow.
if it is Materialstatus(Mstae) I would like to take him to Mara related information.
If it is Sales Order Document(vbeln) I would like to take him to SO related information.
I hope I am clear my requirement. if not please let me know.
I am expecting some possible answers for it.
Thanks and Regards,
Shankar
PS: It is returning the tablename but it doesnt solve the problem bcz both columns(or fields) belongs to the same row. so I really cant distinguish from where i have got the hotspot click.

Can you debug why the fieldname is not returned? This is strange.
Usually I use this code and it always works:
FORM f_user_command USING f_ucomm     TYPE sy-ucomm         "#EC CALLED
                                               i_selfield      TYPE slis_selfield.
CHECK f_ucomm = '&IC1'.
CLEAR wa_report.
READ TABLE t_report
        INTO wa_report
       INDEX i_selfield-tabindex.
IF sy-subrc <> 0.
    EXIT.
ENDIF.
CASE i_selfield-fieldname.
*   Drill down to STR
    WHEN 'BANFN'.
      CHECK wa_report-banfn IS NOT INITIAL.
      SET PARAMETER ID 'BAN' FIELD wa_report-banfn.
      CALL TRANSACTION 'ME53N' AND SKIP FIRST SCREEN.
*   Drill down to STO
    WHEN 'EBELN'.
      CHECK wa_report-ebeln IS NOT INITIAL.
      SET PARAMETER ID 'BES' FIELD wa_report-ebeln.
      CALL TRANSACTION 'ME23N' AND SKIP FIRST SCREEN.
ENDCASE.

Where is the option to close multiple tabs? It used to be a Right Click in the "List All Tabs" function. Now it's gone!

Well I figured out how to get the Tab Bar back where it should, down below where you can easily get to it, but now I see that the "Close All Other Tabs" option which used to be in the right click menu of the "List All Tabs" arrow has disappeared.
Is there anyway to get that back? This design change is really not as good as 3.5. Also tell that person to slow down. Who can understand what he's saying?
Thanks!

In Firefox 4 the Tab Bar is a regular toolbar and that causes the toolbar context menu to show if you right click.
You can right click the tab that you want to keep to "Close Other Tabs"

Set default focus on pushbutton (dynpro not ALV)

Dear all
I created a popup showing a table control and 2 buttons (confirm / abort).
The user simply wants to push the confirm button to proceed by pressing enter but unfortunatly I see no way to set the focus on that element by default.
Any help is appreciated.
Thank's in advance and best regards
Benno

Use this in PBO:
* BUT_CONF is the button for the Confirm
SET CURSOR FIELD 'BUT_CONF'
Regards,
Naimesh Patel

How to create 2 ALV output lists in a single output?

Hi guys...
My clients requirement is to create 2 ALV output lists in a single output list.how can i do this?i mean which function module i can use for this requirement?please help me out...
Regards..

*& Report ZLCL_ALV_INT_INVOICE                                        *
REPORT ZLCL_ALV_INT_INVOICE                    .
DATA: O_CONT1 TYPE REF TO CL_GUI_CUSTOM_CONTAINER,
      O_CONT2 TYPE REF TO CL_GUI_CUSTOM_CONTAINER,
      O_GRID1 TYPE REF TO CL_GUI_ALV_GRID,
      O_GRID2 TYPE REF TO CL_GUI_ALV_GRID.
DATA: IT_VBRK LIKE VBRK OCCURS 1 WITH HEADER LINE.
DATA: IT_VBRP LIKE VBRP OCCURS 1 WITH HEADER LINE.
DATA: WA_VBRK LIKE VBRK.
*--Layout
DATA: WA_LAYO TYPE LVC_S_LAYO.
      CLASS LCL_BILLING DEFINITION
CLASS LCL_BILLING DEFINITION.
PUBLIC SECTION.
    CLASS-METHODS: HANDLE_HOTSPOT_CLICK
             FOR EVENT HOTSPOT_CLICK
             OF CL_GUI_ALV_GRID
             IMPORTING E_ROW_ID.
ENDCLASS.                    "LCL_BILLING DEFINITION
      CLASS LCL_BILLING IMPLEMENTATION
CLASS LCL_BILLING IMPLEMENTATION.
METHOD HANDLE_HOTSPOT_CLICK.
    IF NOT E_ROW_ID IS INITIAL.
*--Reading selected billing docno
      READ TABLE IT_VBRK INTO WA_VBRK INDEX E_ROW_ID-INDEX.
*--GETTING BILLING DOC ITEMS
      REFRESH IT_VBRP.
      SELECT *
        FROM VBRP
        INTO TABLE IT_VBRP
        WHERE VBELN = WA_VBRK-VBELN.
      CALL SCREEN 200.
    ENDIF.
ENDMETHOD.                    "HANDLE_HOTSPOT_CLICK
ENDCLASS.                    "LCL_BILLING IMPLEMENTATION
SELECT-OPTIONS: S_VBELN FOR IT_VBRK-VBELN.
START-OF-SELECTION.
PERFORM GET_DATA.
SET SCREEN 100.
*&      Form GET_DATA
      text
FORM GET_DATA .
*--billing header data
SELECT *
    FROM VBRK
    INTO TABLE IT_VBRK
    WHERE VBELN IN S_VBELN.
IF SY-SUBRC <> 0.
    MESSAGE I000(Z00) WITH 'No Data Found'.
ENDIF.
EXIT.
ENDFORM.                    " GET_DATA
*&      Module STATUS_0100 OUTPUT
      text
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'MENU'.
ENDMODULE.                 " STATUS_0100 OUTPUT
*&      Module USER_COMMAND_0100 INPUT
      text
MODULE USER_COMMAND_0100 INPUT.
CASE SY-UCOMM.
    WHEN 'BACK'.
      PERFORM EXIT_PROGRAM.
ENDCASE.
ENDMODULE.                 " USER_COMMAND_0100 INPUT
*&      Module PBO_100 OUTPUT
      text
MODULE PBO_100 OUTPUT.
IF O_CONT1 IS INITIAL.
    CREATE OBJECT O_CONT1
      EXPORTING
        CONTAINER_NAME              = 'VBRK_CONT'
      EXCEPTIONS
        CNTL_ERROR                  = 1
        CNTL_SYSTEM_ERROR           = 2
        CREATE_ERROR                = 3
        LIFETIME_ERROR              = 4
        LIFETIME_DYNPRO_DYNPRO_LINK = 5
        OTHERS                      = 6
    IF SY-SUBRC <> 0.
      MESSAGE I000(Z00) WITH 'Error in container'.
      EXIT.
    ENDIF.
    CREATE OBJECT O_GRID1
      EXPORTING
         I_PARENT          = O_CONT1
      EXCEPTIONS
        ERROR_CNTL_CREATE = 1
        ERROR_CNTL_INIT   = 2
        ERROR_CNTL_LINK   = 3
        ERROR_DP_CREATE   = 4
        OTHERS            = 5
    IF SY-SUBRC <> 0.
      MESSAGE I000(Z00) WITH 'Error in Grid'.
      EXIT.
    ENDIF.
ENDIF.
*--Layout for 1st grid
WA_LAYO-KEYHOT = 'X'.
WA_LAYO-GRID_TITLE = 'Billing Document Header Data'.
CALL METHOD O_GRID1->SET_TABLE_FOR_FIRST_DISPLAY
    EXPORTING
      I_STRUCTURE_NAME              = 'VBRK'
      IS_LAYOUT                     = WA_LAYO
    CHANGING
      IT_OUTTAB                     = IT_VBRK[]
    EXCEPTIONS
      INVALID_PARAMETER_COMBINATION = 1
      PROGRAM_ERROR                 = 2
      TOO_MANY_LINES                = 3
      OTHERS                        = 4.
IF SY-SUBRC <> 0.
    MESSAGE I000(Z00) WITH 'Error in showing grid'.
    EXIT.
ENDIF.
*-Setting the focus on the grid
CALL METHOD CL_GUI_CONTROL=>SET_FOCUS
    EXPORTING
      CONTROL           = O_GRID1 "Grid control object
    EXCEPTIONS
      CNTL_ERROR        = 1
      CNTL_SYSTEM_ERROR = 2
      OTHERS            = 3.
IF SY-SUBRC <> 0.
    MESSAGE I000(Z00) WITH 'Error in setting focus'.
ENDIF.
*--Event handler registration
SET HANDLER LCL_BILLING=>HANDLE_HOTSPOT_CLICK FOR O_GRID1.
ENDMODULE.                 " PBO_100 OUTPUT
*&      Module STATUS_0200 OUTPUT
      text
MODULE STATUS_0200 OUTPUT.
SET PF-STATUS 'MENU'.
ENDMODULE.                 " STATUS_0200 OUTPUT
*&      Module USER_COMMAND_0200 INPUT
      text
MODULE USER_COMMAND_0200 INPUT.
CASE SY-UCOMM.
    WHEN 'BACK'.
      LEAVE TO SCREEN 100.
ENDCASE.
ENDMODULE.                 " USER_COMMAND_0200 INPUT
*&      Module PBO_200 OUTPUT
      text
MODULE PBO_200 OUTPUT.
IF O_CONT2 IS INITIAL.
    CREATE OBJECT O_CONT2
        EXPORTING
        CONTAINER_NAME              = 'VBRP_CONT'
    EXCEPTIONS
      CNTL_ERROR                  = 1
      CNTL_SYSTEM_ERROR           = 2
      CREATE_ERROR                = 3
      LIFETIME_ERROR              = 4
      LIFETIME_DYNPRO_DYNPRO_LINK = 5
      OTHERS                      = 6
    IF SY-SUBRC <> 0.
      MESSAGE I000(Z00) WITH 'Error in container'.
      EXIT.
    ENDIF.
    CREATE OBJECT O_GRID2
      EXPORTING
        I_PARENT          = O_CONT2
      EXCEPTIONS
        ERROR_CNTL_CREATE = 1
        ERROR_CNTL_INIT   = 2
        ERROR_CNTL_LINK   = 3
        ERROR_DP_CREATE   = 4
        OTHERS            = 5.
    IF SY-SUBRC <> 0.
      MESSAGE I000(Z00) WITH 'Error in grid linking'.
      EXIT.
    ENDIF.
    CALL METHOD O_GRID2->SET_TABLE_FOR_FIRST_DISPLAY
      EXPORTING
        I_STRUCTURE_NAME              = 'VBRP'
      CHANGING
        IT_OUTTAB                     = IT_VBRP[]
      EXCEPTIONS
        INVALID_PARAMETER_COMBINATION = 1
        PROGRAM_ERROR                 = 2
        TOO_MANY_LINES                = 3
        OTHERS                        = 4.
    IF SY-SUBRC <> 0.
      MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
ELSE.
*--refreshing the alv grid with the latest content of the internal table
*--which is linked
    CALL METHOD O_GRID2->REFRESH_TABLE_DISPLAY
      EXCEPTIONS
        FINISHED = 1
        OTHERS   = 2.
    IF SY-SUBRC <> 0.
      MESSAGE I000(Z00) WITH 'Error in Refreshing gird'.
    ENDIF.
ENDIF.
ENDMODULE.                 " PBO_200 OUTPUT
*&      Form EXIT_PROGRAM
      text
FORM EXIT_PROGRAM .
*--Deallocating the memory
IF NOT O_CONT2 IS INITIAL.
    CALL METHOD O_CONT2->FREE
      EXCEPTIONS
        CNTL_ERROR        = 1
        CNTL_SYSTEM_ERROR = 2
        OTHERS            = 3.
    IF SY-SUBRC <> 0.
      MESSAGE I000(Z00) WITH 'Error in deallocating memory'.
      EXIT.
    ENDIF.
    CLEAR: IT_VBRP,
           IT_VBRP[].
    FREE: IT_VBRP,
           IT_VBRP[].
ENDIF.
IF NOT O_CONT1 IS INITIAL.
    CALL METHOD O_CONT1->FREE
      EXCEPTIONS
        CNTL_ERROR        = 1
        CNTL_SYSTEM_ERROR = 2
        OTHERS            = 3.
    IF SY-SUBRC <> 0.
      MESSAGE I000(Z00) WITH 'Error in deallocating memory'.
      EXIT.
    ENDIF.
    CLEAR: IT_VBRK,
           IT_VBRK[].
    FREE: IT_VBRK,
           IT_VBRK[].
ENDIF.
*--Cearing the buffered content
CALL METHOD CL_GUI_CFW=>FLUSH
    EXCEPTIONS
      CNTL_SYSTEM_ERROR = 1
      CNTL_ERROR        = 2
      OTHERS            = 3.
IF SY-SUBRC <> 0.
    MESSAGE I000(Z00) WITH 'Error in clearing Buffer'.
    EXIT.
ENDIF.
LEAVE PROGRAM.
ENDFORM.                    " EXIT_PROGRAM
SCREEN 100
PROCESS BEFORE OUTPUT.
MODULE STATUS_0100.
MODULE PBO_100.
PROCESS AFTER INPUT.
MODULE USER_COMMAND_0100.
SCREEN200
PROCESS BEFORE OUTPUT.
MODULE STATUS_0200.
MODULE PBO_200.
PROCESS AFTER INPUT.
MODULE USER_COMMAND_0200.

After a crash & restart of firefox it shows list of tabs to restore but no checkmarks to slect them

Running Firefox 3.6.13 on PPC G5.
When firefox "unexpectedly" crashes, and restarts, it '''''used''''' to show a window that said something like "Opps, we're sorry" and then a list of tabs that were open at the time of the crash would appear, & you could check or Un-check anything on the list to tell it (in my case) to open less tabs, since Firefox only seemed to crash when I had 8 or more tabs open. '''Firefox never crashes with 4 or fewer tabs open''', in my experience, so I assume that's the reason it crashes, when it does.
Since about 6 months ago (no I ca't rememeber anything new that happened six months ago), Firefox now''' shows''' that window '''but it's like it's "corrupted"'''.
The list is there, but no checkmarks, and if I click on any or all of the tabs to restore '''or not restore''', no checkmark appears or disappears next to the name of the tab. When I click to proceed, '''Firefox now always tries to reload every tab on the list.''', leading to another crash and another etc.
Back when I '''could uncheck tabs''' (I'd usually choose to reopen no more than 5),
'''that would always result in a stable restart.''' Since I can't uncheck tabs anmore, it leads to multiple crashes one after the other.
I've already tried the corrupted file ".bak" thing suggested in the help pages.
I think it's got to be '''some''' kind of corruption because in the "checklist" window, the name of any tab I click on disappears, and the colors and icons in that checklist window change i.e appear disappear.
I've copy pasted the help troubleshooting information window, but since it's not a text file it appears to have pasted weirdly.
In the "This happened how often" dropdown below, there is no selection for "Everytime Firefox crashes" but I'd check that if it were a choice. It doesn't happen during any specific "time period".
'''This problem only happens when Firefox crashes unexpectedly, and it happens every time.'''

Open new tabs on far right, restore pre Fx3.6 behavior, set '''browser.tabs.insertRelatedAfterCurrent''' to '''false''' in '''about:config'''
For more information see item #36 in ...
You can make Firefox 4.0.1 look like Firefox 3.6.17, see numbered items 1-10 in the following topic [http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface Fix Firefox 4.0 toolbar user interface, problems (Make Firefox 4.0 look like 3.6)]
'''''More information on configuration variables''' available in
[http://kb.mozillazine.org/About:config_entries about:config (entries)] and for users not familiar with the process there is [http://kb.mozillazine.org/About:config about:config (How to change)] -- Specialized list of only [http://dmcritchie.mvps.org/firefox/tabs_config.htm Tabs configuration] variables.''

Changing tab focus with the keyboard

I've read about changing the tab focus from one page to another programmatically; however, I would like to have shortcut keys to change tabs (like many programs that use CTRL+Tab to change windows within the program).
I could use an event structure to capture keyboard button presses and then change the value of the tab control, but is there a more straightforward approach?
Thanks!
mlloyd

You can set all other controls not to be tabbed through and the tab control to have its pages tabbed through. That way, when you use tab, only the tab control's pages will be on the tabbing list. This, however, is probably less straightforward.
I'm not sure what's the problem with the method you outlined. In most cases, if you want something to happen, you will have to code it. This appeares to be one of those cases. You can make a subVI to do the tabbing for you, if you don't want to have to code all of it in your VI. Pass the reference of the tab control into the VI after you detect the event and use that to decide whether to increase or decrease the tab value. Be sure to cycle the number back to the first page when it reaches the end.
Try to take over the world!

Threadinar10 - Page Separator, Page Fragment Box , Tab Set & Tab Components

Hi All,
This is the tenth in the Threadinar series. See the Components Threadinar Index at http://forum.sun.com/jive/thread.jspa?threadID=103424 for the complete list to date.
This Threadinar will discuss 4 components in the "Components Palette: Layout Section" section of the Creator Component Catalog.
The components we will focus on today are
"Page Separator", "Page Fragment Box" , "Tab Set" & "Tab" Components.
Let us begin our discussion with the "Page Separator" Component.
Page Separator Component
You can drag the Page Separator component from the Palette's Layout category to the Visual Designer to create a horizontal line that resizes to any page width selected by the user. This component is the visual equivalent of an HTML <hr> tag.
In the page bean, a Page Separator component is a PageSeparator object.
* Note: If you want to use an HTML <hr> tag, drop a Meta component on the page and set its tag property to hr.
[b]Page Fragment Box Component
This component enables you to include a page fragment in a page. A page fragment is a separate, reusable part of a page that can be included in any number of pages. For example, you might want to put a common a visual element like a header graphic in a page fragment and then include it in all the pages in an application.
When you drag the Page Fragment Box component from the Layout category of the Palette and drop it on a page, the Select Page Fragment dialog box prompts you for the name of the page fragment to be included. You can enter the name of an existing page fragment or create a new page fragment. If you create a new page fragment, the IDE gives the new fragment a .jspf file suffix and creates a node for it in the Projects window, as well as adding the page fragment to the Outline window.
* Note: A Page Fragment Box component simply includes a page fragment in a page. Deleting a Page Fragment Box component from a page does not delete the page fragment itself, even if you originally used the Select Page Fragment dialog box to create the page fragment.
After dropping a Page Fragment Box component on the page, if you click inside the component, you see the properties for the included fragment. If you click the border of the component, you see the properties for the enclosing <div> block. You can also use the Outline window to select the enclosing block, the page fragment, or the components in the page fragment. In the Outline window, the Page Fragment Box component is represented by a node named directive.include:fragment-file.jspf, where fragment-file is the name of the page fragment file.
If you double-click the page fragment, it opens as a page in the Visual Editor, enabling you to edit it like a regular page. The page fragment has an associated JavaBeans object, a page fragment bean, which you can edit by clicking the Java button at the top of the page fragment when it is open in the Visual Editor. As with a regular page, if you drop a component like a button in a fragment, double clicking adds an event handler in the page fragment bean, enabling you to reuse the code on any page to which you add the page fragment. A common scenario for reusing component code would be a Search Box fragment that has a search Label, a Text Field where the user enters the search string, some Inline Help, and search logic code in the page fragment bean.
* The tab order of the components in the page is unlikely to work properly unless you enclose the entire page fragment box in the Faces Verbatim component.
For more details see tutorial : "Using Page Fragments"
http://developers.sun.com/prodtech/javatools/jscreator/learning/tutorials/2/pagefragments.html
[b]Tab Set Component
The Tab Set component in the Palette's Layout category is a container for a set of Tab components. Typical uses of a tab set are:
* To provide alternate sets of components on the same page and enable the user to navigate to them by clicking on tabs. The user sees only the components under the currently selected tab. For more information on adding components to tabs, see Tab Component.
* To navigate among a set of pages. If you use a tab set this way, you would usually have the tab set near the top of each page with the component's width set at 100%. You would use the Page Navigation editor to define each tab to display a page in the application, with the current page's tab set as the selected tab. In addition, you would need to delete the default Layout Panel component under each tab so the tab would display the page contents.
You can set Tab Set properties in the component's Properties window.
A Tab Set component contains Tab Components, and Tab components can contain other Tab components. You can see these components displayed as hierarchical nodes in the Outline window after you add a Tab Set to your page.
You can add a new tab to a tab set in two ways, by right-clicking the Tab Set component and choosing Add Tab or by dropping a new tab component on the Tab Set or on a Tab component.
You can drop a new tab component on a tab set in the Visual Designer to the right or left of existing tabs to create a new tab at that level. The tabs in a tab set can also be containers for other tabs. If you drop a Tab component on an existing tab, the new tab becomes a child of the tab on which you dropped it. The maximum number of levels for tabs is three.
The tab set component determines which tab is rendered as selected, storing the value in the selected property. By default, the selected property is set to the first tab created for the component. If you click a tab while designing your web page, that tab becomes the selected tab. You can tell during design time that a tab is selected because its color changes.
[b]Tab Component
A Tab is part of a Tab Set component. You can add a new tab to a tab set in two ways, by right-clicking the Tab Set component and choosing Add Tab or by dragging a new Tab component from the Layout category of the Palette and dropping it on the Tab Set or on another Tab component. You can also drag from the Palette and drop the tab on the tab set's nodes in the Outline window.
* If you drop the Tab component to the left or right of an existing tab, it is added to the same row of tabs.
* If you drop the Tab component on an existing tab, the dropped tab becomes a child tab of the tab on which you drop it unless the existing tab is a third level tab. You can have at most three levels of tabs in a tab set.
o Note: You cannot add a child tab to a tab that has components in its Layout Panel. When you drop a tab on an existing tab component that has an empty Layout Panel, the empty Layout Panel is deleted to make room for the dropped tab.
By default, a Tab component has a Layout Panel below it where you can drop components that will be displayed when the user selects the tab. The Layout Panel by default has its panelLayout property set to Grid Layout, meaning that components dropped on the panel are aligned at the location where they are dropped. You can change the layout behavior by setting the panelLayout property to Flow Layout, which aligns dropped components left to right in rows. For more information on Layout Panel properties, see Layout Panel Component Properties Window.
To select a tab in a tab set, either click the Tab component on the page or select the Tab component's node in the Outline window. To select the whole tab set, either click the border of the Tab Set component on the page or select the tab set's node in the Outline window. Alternatively, you can select a Tab component and either press Escape or right-click and choose Select Parent to select its parent component.
* Note: If you select a tab on a page in the Visual Designer, a side effect is that it becomes the selected tab. If this effect is not what you want, select the tab in the Outline window so you can set its properties.
You can drag tabs in the Outline window to change their location and level in the tab set.
Some typical uses of tabs:
* You can drop components on the Layout Panel component below a tab to enable a set of components to be displayed below each tab. When the user selects a tab, they see only the components that are associated with the tab, without having to change pages.
* You can use a tab set to navigate among a set of pages. Each tab component links to a page in your web application. You would use the Page Navigation editor to define each tab to display a page in the application, with the current page's tab set as the selected tab. If you want to use the tab set for page navigation, be sure to delete each tab component's Layout Panel.
You can also right-click the Tab component and choose one of the following options:
* Edit action Event Handler. Code the action event handler, the method that is called when the user clicks the tab. This method determines which page or resource to open based on specified conditions. The action method typically processes mouse clicks and returns a string indicating the name of a page navigation case (the page in your application to display next). The default name for the method is tab-id_action, where tab-id is the value of the tab's id property.
* Bind to Data. Dynamically set the text that appears on the tab. You can bind the component's text property to an object or a data provider, as described in the topic Bind to Data Dialog Box.
* Property Bindings. Opens a dialog box that enables you to bind properties of the component in addition to the text property to other objects or bean properties that update this component's properties automatically.
[b] Please join in and share your comments, experiences, additional information, questions, feedback, etc. on these components. <br><br>
Thank you for your participation

The following blog has a mini tutorial on using a tab set in a page fragment for page navigation:
http://blogs.sun.com/divas/entry/tabbing_thru_the_tulips
A reader commented that the mini tutorial needed to be improved upon to show how to keep the tab state and navigation state in synch.
How would you do it? If you have a good example, maybe post it to this thread.
Also, there is no tab tutorial but it is on the priority list. What would you like a tab tutorial to show how to do?

Help needed Displaying ALV Secondary list without using oops concept

Hi Experts
Help needed Displaying ALV Secondary list without using oops concept.
its urgent
regds
rajasekhar

hi chk this code
******************TABLES DECLARATION*****************
TABLES : VBAP,MARA.
*****************TYPE POOLS**************************
TYPE-POOLS : SLIS.
****************INTERNAL TABLES**********************
DATA : BEGIN OF IT_VBAP OCCURS 0,
VBELN LIKE VBAP-VBELN, "SALES DOCUMENT
POSNR LIKE VBAP-POSNR, "SALES DOCUMENT ITEM
MATNR LIKE VBAP-MATNR, "MATERIAL NUMBER
END OF IT_VBAP.
****************TEMPORARY VARIABLES******************
DATA : V_VBELN LIKE VBAP-VBELN."SALES DOCUMENT
DATA : V_MTART LIKE MARA-MTART. "MATERIAL TYPE
*****************FIELD CATALOG***********************
DATA : IT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
       WA_FIELDCAT TYPE SLIS_FIELDCAT_ALV.
****************LAYOUT*******************************
DATA : WA_LAYOUT TYPE SLIS_LAYOUT_ALV.
***************VARIANT*******************************
DATA : G_VARIANT LIKE DISVARIANT.
****************SAVE*********************************
DATA : G_SAVE(1) TYPE C.
*****************EVENTS******************************
DATA : XS_EVENTS TYPE SLIS_ALV_EVENT,
       G_EVENTS TYPE SLIS_T_EVENT.
******************PF STATUS**************************
DATA : PF_STATUS TYPE SLIS_FORMNAME VALUE 'SET_PF_STATUS'.
******************USER COMMAND************************
DATA : USER_COMMAND TYPE SLIS_FORMNAME VALUE 'SET_USER_COMMAND',
       R_UCOMM LIKE SY-UCOMM.
****************SELECTION SCREEN************************
SELECT-OPTIONS : S_VBELN FOR VBAP-VBELN.
***************AT SELECTION SCREEN*********************
AT SELECTION-SCREEN.
PERFORM VALIDATE.
**************START-OF-SELECTION**************************
START-OF-SELECTION.
PERFORM GET_DETAILS.
PERFORM FIELDCAT.
PERFORM LAYOUT.
PERFORM VARIANT.
PERFORM SAVE.
PERFORM EVENTS.
PERFORM ALV_DISPLAY.
*********************FORMS*******************************************
*&      Form validate
      text
--> p1        text
<-- p2        text
FORM VALIDATE .
SELECT SINGLE VBELN
                FROM VBAP
                INTO V_VBELN
                WHERE VBELN IN S_VBELN.
IF SY-SUBRC <> 0.
    MESSAGE E000 WITH 'enter valid vbeln'.
ENDIF.
ENDFORM.                    " validate
*&      Form get_details
      text
--> p1        text
<-- p2        text
FORM GET_DETAILS .
SELECT VBELN
         POSNR
         MATNR
         FROM VBAP
         INTO TABLE IT_VBAP
         WHERE VBELN IN S_VBELN.
IF SY-SUBRC <> 0.
    MESSAGE E000 WITH 'no details found'.
ENDIF.
ENDFORM.                    " get_details
*&      Form fieldcat
      text
--> p1        text
<-- p2        text
FORM FIELDCAT .
WA_FIELDCAT-TABNAME = 'IT_VBAP'.
WA_FIELDCAT-FIELDNAME = 'VBELN'.
WA_FIELDCAT-OUTPUTLEN = 10.
WA_FIELDCAT-SELTEXT_L = 'SALES DOC'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_VBAP'.
WA_FIELDCAT-FIELDNAME = 'POSNR'.
WA_FIELDCAT-OUTPUTLEN = 6.
WA_FIELDCAT-SELTEXT_L = 'ITEM'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_VBAP'.
WA_FIELDCAT-FIELDNAME = 'MATNR'.
WA_FIELDCAT-OUTPUTLEN = 18.
WA_FIELDCAT-SELTEXT_L = 'MATERIAL NO'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
ENDFORM.                    " fieldcat
*&      Form LAYOUT
      text
--> p1        text
<-- p2        text
FORM LAYOUT .
WA_LAYOUT-ZEBRA = 'X'.
ENDFORM.                    " LAYOUT
*&      Form VARIANT
      text
--> p1        text
<-- p2        text
FORM VARIANT .
CLEAR G_VARIANT.
G_VARIANT-REPORT = SY-REPID.
ENDFORM.                    " VARIANT
*&      Form SAVE
      text
--> p1        text
<-- p2        text
FORM SAVE .
CLEAR G_SAVE.
G_SAVE = 'A'.
ENDFORM.                    " SAVE
*&      Form EVENTS
      text
--> p1        text
<-- p2        text
FORM EVENTS .
CLEAR XS_EVENTS.
XS_EVENTS-NAME = SLIS_EV_TOP_OF_PAGE.
XS_EVENTS-FORM = 'TOP_OF_PAGE'.
APPEND XS_EVENTS TO G_EVENTS.
ENDFORM.                    " EVENTS
*&      Form TOP_OF_PAGE
      text
FORM TOP_OF_PAGE.
WRITE :/ ' INTELLI GROUP'.
ENDFORM.                    "TOP_OF_PAGE
*&      Form ALV_DISPLAY
      text
--> p1        text
<-- p2        text
FORM ALV_DISPLAY .
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
   EXPORTING
I_INTERFACE_CHECK              = ' '
I_BYPASSING_BUFFER             =
I_BUFFER_ACTIVE                = ' '
     I_CALLBACK_PROGRAM             = SY-REPID
     I_CALLBACK_PF_STATUS_SET       = PF_STATUS
     I_CALLBACK_USER_COMMAND        = USER_COMMAND
I_STRUCTURE_NAME               =
     IS_LAYOUT                      = WA_LAYOUT
     IT_FIELDCAT                    = IT_FIELDCAT
IT_EXCLUDING                   =
IT_SPECIAL_GROUPS              =
IT_SORT                        =
IT_FILTER                      =
IS_SEL_HIDE                    =
I_DEFAULT                      = 'X'
     I_SAVE                         = G_SAVE
     IS_VARIANT                     = G_VARIANT
     IT_EVENTS                      = G_EVENTS
IT_EVENT_EXIT                  =
IS_PRINT                       =
IS_REPREP_ID                   =
I_SCREEN_START_COLUMN          = 0
I_SCREEN_START_LINE            = 0
I_SCREEN_END_COLUMN            = 0
I_SCREEN_END_LINE              = 0
IMPORTING
E_EXIT_CAUSED_BY_CALLER        =
ES_EXIT_CAUSED_BY_USER         =
    TABLES
      T_OUTTAB                       = IT_VBAP
   EXCEPTIONS
     PROGRAM_ERROR                  = 1
     OTHERS                         = 2
IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    " ALV_DISPLAY
*&      Form SET_PF_STATUS
      text
FORM SET_PF_STATUS USING EXTAB TYPE SLIS_T_EXTAB.
SET PF-STATUS 'Z50651_PFSTATUS' EXCLUDING EXTAB.
ENDFORM.                    "SET_PF_STATUS
*&      Form SET_USER_COMMAND
      text
FORM SET_USER_COMMAND USING R_UCOMM
                            RS_SELFIELD TYPE SLIS_SELFIELD.
CASE R_UCOMM.
    WHEN 'DC'.
      READ TABLE IT_VBAP INDEX RS_SELFIELD-TABINDEX.
      IF SY-SUBRC = 0.
        SELECT SINGLE MTART
                      FROM MARA
                      INTO V_MTART
                      WHERE MATNR = IT_VBAP-MATNR.
        IF SY-SUBRC <> 0.
   MESSAGE E000 WITH 'NO MATERIAL DESCRIPTION FOR SELECTED MATERIAL NO'.
        ELSE.
          WRITE :/ 'MATERIAL NO :',IT_VBAP-MATNR.
          WRITE :/ 'MATERIAL TYPE :' , V_MTART.
        ENDIF.
      ENDIF.
    WHEN 'BACK'.
      LEAVE TO SCREEN 0.
    WHEN 'EXIT'.
      LEAVE TO SCREEN 0.
    WHEN 'CLOSE'.
      CALL TRANSACTION 'SE38'.
ENDCASE.
REPORT Z_ALV_INTERACTIVE MESSAGE-ID ZMSG_50651
                                LINE-SIZE 100
                                LINE-COUNT 60
                                NO STANDARD PAGE HEADING.
******************TABLES DECLARATION*****************
TABLES : VBAP,MARA.
*****************TYPE POOLS**************************
TYPE-POOLS : SLIS.
****************INTERNAL TABLES**********************
DATA : BEGIN OF IT_VBAP OCCURS 0,
VBELN LIKE VBAP-VBELN, "SALES DOCUMENT
POSNR LIKE VBAP-POSNR, "SALES DOCUMENT ITEM
MATNR LIKE VBAP-MATNR, "MATERIAL NUMBER
END OF IT_VBAP.
****************TEMPORARY VARIABLES******************
DATA : V_VBELN LIKE VBAP-VBELN."SALES DOCUMENT
DATA : V_MTART LIKE MARA-MTART. "MATERIAL TYPE
*****************FIELD CATALOG***********************
DATA : IT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
       WA_FIELDCAT TYPE SLIS_FIELDCAT_ALV.
****************LAYOUT*******************************
DATA : WA_LAYOUT TYPE SLIS_LAYOUT_ALV.
***************VARIANT*******************************
DATA : G_VARIANT LIKE DISVARIANT.
****************SAVE*********************************
DATA : G_SAVE(1) TYPE C.
*****************EVENTS******************************
DATA : XS_EVENTS TYPE SLIS_ALV_EVENT,
       G_EVENTS TYPE SLIS_T_EVENT.
******************PF STATUS**************************
DATA : PF_STATUS TYPE SLIS_FORMNAME VALUE 'SET_PF_STATUS'.
******************USER COMMAND************************
DATA : USER_COMMAND TYPE SLIS_FORMNAME VALUE 'SET_USER_COMMAND',
       R_UCOMM LIKE SY-UCOMM.
****************SELECTION SCREEN************************
SELECT-OPTIONS : S_VBELN FOR VBAP-VBELN.
***************AT SELECTION SCREEN*********************
AT SELECTION-SCREEN.
PERFORM VALIDATE.
**************START-OF-SELECTION**************************
START-OF-SELECTION.
PERFORM GET_DETAILS.
PERFORM FIELDCAT.
PERFORM LAYOUT.
PERFORM VARIANT.
PERFORM SAVE.
PERFORM EVENTS.
PERFORM ALV_DISPLAY.
*********************FORMS*******************************************
*&      Form validate
      text
--> p1        text
<-- p2        text
FORM VALIDATE .
SELECT SINGLE VBELN
                FROM VBAP
                INTO V_VBELN
                WHERE VBELN IN S_VBELN.
IF SY-SUBRC <> 0.
    MESSAGE E000 WITH 'enter valid vbeln'.
ENDIF.
ENDFORM.                    " validate
*&      Form get_details
      text
--> p1        text
<-- p2        text
FORM GET_DETAILS .
SELECT VBELN
         POSNR
         MATNR
         FROM VBAP
         INTO TABLE IT_VBAP
         WHERE VBELN IN S_VBELN.
IF SY-SUBRC <> 0.
    MESSAGE E000 WITH 'no details found'.
ENDIF.
ENDFORM.                    " get_details
*&      Form fieldcat
      text
--> p1        text
<-- p2        text
FORM FIELDCAT .
WA_FIELDCAT-TABNAME = 'IT_VBAP'.
WA_FIELDCAT-FIELDNAME = 'VBELN'.
WA_FIELDCAT-OUTPUTLEN = 10.
WA_FIELDCAT-SELTEXT_L = 'SALES DOC'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_VBAP'.
WA_FIELDCAT-FIELDNAME = 'POSNR'.
WA_FIELDCAT-OUTPUTLEN = 6.
WA_FIELDCAT-SELTEXT_L = 'ITEM'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_VBAP'.
WA_FIELDCAT-FIELDNAME = 'MATNR'.
WA_FIELDCAT-OUTPUTLEN = 18.
WA_FIELDCAT-SELTEXT_L = 'MATERIAL NO'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
ENDFORM.                    " fieldcat
*&      Form LAYOUT
      text
--> p1        text
<-- p2        text
FORM LAYOUT .
WA_LAYOUT-ZEBRA = 'X'.
ENDFORM.                    " LAYOUT
*&      Form VARIANT
      text
--> p1        text
<-- p2        text
FORM VARIANT .
CLEAR G_VARIANT.
G_VARIANT-REPORT = SY-REPID.
ENDFORM.                    " VARIANT
*&      Form SAVE
      text
--> p1        text
<-- p2        text
FORM SAVE .
CLEAR G_SAVE.
G_SAVE = 'A'.
ENDFORM.                    " SAVE
*&      Form EVENTS
      text
--> p1        text
<-- p2        text
FORM EVENTS .
CLEAR XS_EVENTS.
XS_EVENTS-NAME = SLIS_EV_TOP_OF_PAGE.
XS_EVENTS-FORM = 'TOP_OF_PAGE'.
APPEND XS_EVENTS TO G_EVENTS.
ENDFORM.                    " EVENTS
*&      Form TOP_OF_PAGE
      text
FORM TOP_OF_PAGE.
WRITE :/ ' INTELLI GROUP'.
ENDFORM.                    "TOP_OF_PAGE
*&      Form ALV_DISPLAY
      text
--> p1        text
<-- p2        text
FORM ALV_DISPLAY .
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
   EXPORTING
I_INTERFACE_CHECK              = ' '
I_BYPASSING_BUFFER             =
I_BUFFER_ACTIVE                = ' '
     I_CALLBACK_PROGRAM             = SY-REPID
   I_CALLBACK_PF_STATUS_SET         = PF_STATUS
     I_CALLBACK_USER_COMMAND        = USER_COMMAND
I_STRUCTURE_NAME               =
     IS_LAYOUT                      = WA_LAYOUT
     IT_FIELDCAT                    = IT_FIELDCAT
IT_EXCLUDING                   =
IT_SPECIAL_GROUPS              =
IT_SORT                        =
IT_FILTER                      =
IS_SEL_HIDE                    =
I_DEFAULT                      = 'X'
     I_SAVE                         = G_SAVE
    IS_VARIANT                      = G_VARIANT
     IT_EVENTS                      = G_EVENTS
IT_EVENT_EXIT                  =
IS_PRINT                       =
IS_REPREP_ID                   =
I_SCREEN_START_COLUMN          = 0
I_SCREEN_START_LINE            = 0
I_SCREEN_END_COLUMN            = 0
I_SCREEN_END_LINE              = 0
IMPORTING
E_EXIT_CAUSED_BY_CALLER        =
ES_EXIT_CAUSED_BY_USER         =
    TABLES
      T_OUTTAB                       = IT_VBAP
   EXCEPTIONS
     PROGRAM_ERROR                  = 1
     OTHERS                         = 2
IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    " ALV_DISPLAY
*&      Form SET_PF_STATUS
      text
FORM SET_PF_STATUS USING EXTAB TYPE SLIS_T_EXTAB.
SET PF-STATUS 'STANDARD' EXCLUDING EXTAB.
ENDFORM.                    "SET_PF_STATUS
*&      Form SET_USER_COMMAND
      text
FORM SET_USER_COMMAND USING R_UCOMM
                            RS_SELFIELD TYPE SLIS_SELFIELD.
CASE R_UCOMM.
    WHEN 'DC'.
      READ TABLE IT_VBAP INDEX RS_SELFIELD-TABINDEX.
      IF SY-SUBRC = 0.
        SELECT SINGLE MTART
                      FROM MARA
                      INTO V_MTART
                      WHERE MATNR = IT_VBAP-MATNR.
        IF SY-SUBRC <> 0.
   MESSAGE E000 WITH 'NO MATERIAL DESCRIPTION FOR SELECTED MATERIAL NO'.
        ELSE.
          WRITE :/ 'MATERIAL NO :',IT_VBAP-MATNR.
          WRITE :/ 'MATERIAL TYPE :' , V_MTART.
SUBMIT SLIS_DUMMY WITH P_MATNR EQ IT_VBAP-MATNR
                    WITH P_MTART EQ V_MTART.
        ENDIF.
      ENDIF.
    WHEN 'BACK'.
      LEAVE TO SCREEN 0.
    WHEN 'EXIT'.
      LEAVE TO SCREEN 0.
    WHEN 'CLOSE'.
      CALL TRANSACTION 'SE38'.
ENDCASE.
plz reward if useful

How do I change multiple list items at once in a SharePoint list with ribbon button

Hi
I have a sharepoint list and a ribbon button that open a dialog box with buttons to set color on a row
The problem is that i can only selecet one item at once to set the color.
How can i do so it could set all or a couple items att once to the color i want
I want to do this with javascript
here is the code i use to get the item id and the color code is in a seperate js file
'use strict';
var clientContext, hostweburl, parentContext, parentWeb, selectedItem, itemId, listId;
clientContext = new SP.ClientContext.get_current();
hostweburl = decodeURIComponent(getQueryStringParameter("SPHostUrl"));
listId = decodeURIComponent(getQueryStringParameter("SPListId"));
itemId = decodeURIComponent(getQueryStringParameter("SPListItemId"));
parentContext = new SP.AppContextSite(clientContext, hostweburl);
parentWeb = parentContext.get_web();
selectedItem = parentWeb.get_lists().getById(listId).getItemById(itemId);
$(document).ready(function () {
clientContext.load(selectedItem);
clientContext.executeQueryAsync(OnSuccess, OnFail);
function OnSuccess() {
$("#Blue").click(function () {
selectedItem.set_item('Color', 'Blue');
selectedItem.update();
clientContext.load(selectedItem);
clientContext.executeQueryAsync(function () { window.parent.postMessage('CloseCustomActionDialogRefresh', '*'); }, function (sender, args) { alert('Error:' + args.get_message()); });
$("#Green").click(function () {
selectedItem.set_item('Color', 'Green');
selectedItem.update();
clientContext.load(selectedItem);
clientContext.executeQueryAsync(function () { window.parent.postMessage('CloseCustomActionDialogRefresh', '*'); }, function (sender, args) { alert('Error:' + args.get_message()); });
$("#Red").click(function () {
selectedItem.set_item('Color', 'Red');
selectedItem.update();
clientContext.load(selectedItem);
clientContext.executeQueryAsync(function () { window.parent.postMessage('CloseCustomActionDialogRefresh', '*'); }, function (sender, args) { alert('Error:' + args.get_message()); });
$("#Transparent").click(function () {
selectedItem.set_item('Color', 'No Color');
selectedItem.update();
clientContext.load(selectedItem);
clientContext.executeQueryAsync(function () { window.parent.postMessage('CloseCustomActionDialogRefresh', '*'); }, function (sender, args) { alert('Error:' + args.get_message()); });

Check if below can help you
http://sp2010batchedit.codeplex.com/
http://sharepoint.stackexchange.com/questions/35935/use-view-ribbon-custom-action-on-multiple-list-items
http://webcache.googleusercontent.com/search?q=cache:XqMO-PRLHQIJ:dannyjessee.com/blog/index.php/2014/06/enabling-custom-ribbon-buttons-dynamically-based-on-multiple-selected-item-values-using-refreshcommandui-and-jsom/+&cd=1&hl=en&ct=clnk&gl=in
<?xml version="1.0" encoding="utf-8"?>
<Elements xmlns="http://schemas.microsoft.com/sharepoint/">
<CustomAction Id="DannyJessee.TestCustomAction"
Location="CommandUI.Ribbon"
RegistrationId="100"
RegistrationType="List">
<CommandUIExtension>
<CommandUIDefinitions>
<CommandUIDefinition
Location="Ribbon.ListItem.Actions.Controls._children">
<Button Id="DannyJessee.MarkItemsFinishedButton"
Command="cmdMarkItemsFinished"
Image16by16="/_layouts/images/kpinormallarge-0.gif"
Image32by32="/_layouts/images/kpinormallarge-0.gif"
LabelText="Mark as Finished"
TemplateAlias="o2" />
</CommandUIDefinition>
</CommandUIDefinitions>
<CommandUIHandlers>
<CommandUIHandler Command="cmdMarkItemsFinished"
CommandAction="javascript:MarkItemsFinished();"
EnabledScript="javascript:EnableFinishedButton();">
</CommandUIHandler>
</CommandUIHandlers>
</CommandUIExtension>
</CustomAction>
<CustomAction Id="DannyJessee.TestScript"
Location="ScriptLink"
ScriptSrc="/_layouts/15/CustomRibbonButton/CustomAction.js" />
</Elements>
If this helped you resolve your issue, please mark it Answered

Values from alv hierarchical list display

hi all,
i need to display sme values from vbak and vbap tables in ALV hierarchical list display.if i click on the sales order of the header, it should directly go to the second screen of transaction VA03 with the sales details displayed..
   i got the parameter id, how can i assign the selected sales order value to this parameter id?...
regards,
Hamsa Priya

Hi,
Check this example..Marked in bold..
TYPE-POOLS: slis.
DATA: BEGIN OF itab OCCURS 0,
        vbeln TYPE vbeln,
        expand,
      END OF itab.
DATA: BEGIN OF itab1 OCCURS 0,
        vbeln TYPE vbeln,
        posnr TYPE posnr,
        matnr TYPE matnr,
        netpr TYPE netpr,
      END OF itab1.
DATA: t_fieldcatalog TYPE slis_t_fieldcat_alv.
DATA: s_fieldcatalog TYPE slis_fieldcat_alv.
s_fieldcatalog-col_pos = '1'.
s_fieldcatalog-fieldname = 'VBELN'.
s_fieldcatalog-tabname   = 'ITAB'.
s_fieldcatalog-rollname = 'VBELN'.
s_fieldcatalog-outputlen = '12'.
APPEND s_fieldcatalog TO t_fieldcatalog.
CLEAR: s_fieldcatalog.
s_fieldcatalog-col_pos = '1'.
s_fieldcatalog-fieldname = 'VBELN'.
s_fieldcatalog-tabname   = 'ITAB1'.
s_fieldcatalog-rollname = 'VBELN'.
s_fieldcatalog-outputlen = '12'.
APPEND s_fieldcatalog TO t_fieldcatalog.
CLEAR: s_fieldcatalog.
s_fieldcatalog-col_pos = '2'.
s_fieldcatalog-fieldname = 'POSNR'.
s_fieldcatalog-tabname   = 'ITAB1'.
s_fieldcatalog-rollname = 'POSNR'.
APPEND s_fieldcatalog TO t_fieldcatalog.
CLEAR: s_fieldcatalog.
s_fieldcatalog-col_pos = '3'.
s_fieldcatalog-fieldname = 'MATNR'.
s_fieldcatalog-tabname   = 'ITAB1'.
s_fieldcatalog-rollname = 'MATNR'.
APPEND s_fieldcatalog TO t_fieldcatalog.
CLEAR: s_fieldcatalog.
s_fieldcatalog-col_pos = '4'.
s_fieldcatalog-fieldname = 'NETPR'.
s_fieldcatalog-tabname   = 'ITAB1'.
s_fieldcatalog-rollname = 'NETPR'.
s_fieldcatalog-do_sum    = 'X'.
APPEND s_fieldcatalog TO t_fieldcatalog.
CLEAR: s_fieldcatalog.
DATA: s_layout TYPE slis_layout_alv.
s_layout-subtotals_text            = 'SUBTOTAL TEXT'.
s_layout-key_hotspot = 'X'.
s_layout-expand_fieldname = 'EXPAND'.
SELECT vbeln UP TO 100 ROWS
       FROM
       vbak
       INTO TABLE itab
       WHERE vbeln > '0060000040'.
IF NOT itab[] IS INITIAL.
SELECT vbeln posnr matnr netpr
         FROM vbap
         INTO TABLE itab1
         FOR ALL ENTRIES IN itab
         WHERE vbeln = itab-vbeln.
ENDIF.
DATA: v_repid TYPE syrepid.
v_repid = sy-repid.
DATA: s_keyinfo TYPE slis_keyinfo_alv.
s_keyinfo-header01 = 'VBELN'.
s_keyinfo-item01   = 'VBELN'.
CALL FUNCTION 'REUSE_ALV_HIERSEQ_LIST_DISPLAY'
     EXPORTING
          i_callback_program      = v_repid
<b>          i_callback_user_command = 'USER_COMMAND'</b>
          is_layout               = s_layout
          it_fieldcat             = t_fieldcatalog
          i_tabname_header        = 'ITAB'
          i_tabname_item          = 'ITAB1'
          is_keyinfo              = s_keyinfo
     TABLES
          t_outtab_header         = itab
          t_outtab_item           = itab1
     EXCEPTIONS
          program_error           = 1
          OTHERS                  = 2.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
<b>FORM user_command USING ucomm LIKE sy-ucomm
selfield TYPE slis_selfield.
IF ucomm = '&IC1' AND selfield-fieldname = 'VBELN'.
    READ TABLE itab INDEX selfield-tabindex.
    IF sy-subrc = 0.
document
      SET PARAMETER ID 'AUN' FIELD itab-vbeln.
      CALL TRANSACTION 'VA03' AND SKIP FIRST SCREEN.
    ENDIF.
ENDIF.
ENDFORM.</b>
Thanks,
Naren

How many lines we can print using Non-alv report list ?

Hi Experts,
How many lines we can print using Non-alv report list ?
regards
vishnu

Hi,
It depends on the page size according to the page size we can set the no. of lines as follows,
REPORT program_name NO STANDARD PAGE HEADING
LINE-SIZE 290
LINE-COUNT 65.
Hope it helps you,
Regards,
Abhijit G. Borkar

'list all tabs' arrow - how can I move it to the right side of the tabs?

I want to have the 'List all tabs' arrow on the right side of the firefox window.. just to the left of the 'minimise/restore/close' set of buttons. The 'Open a new tab' button can be moved -- why not also the 'list all tabs' button?? Very frustrating. Much Google-fu has not yet found a solution to this simple problem... help?

Hmm, by default that little downward pointing triangle is at the right end of the tab bar. Could you go back into Customize mode and try dragging anything that appears to the right of it back around to the left of it?

ALV multiple lists: Set tab focus

Similar Messages

Maybe you are looking for