ALV: Send ALV output as mail - background processing
Hi all,
I'm a newbie in SDC and try to implement the following functionality (Version 4.0B):
A ABAP report (to be scheduled as e.g. a daily job run) with ALV output should send an automated email containing the ALV informations to a receiver specified in the selection criterias.
I already have the following pieces:
1) The report with ALV output (running online and clicking on List/send/office works perfectly, the alv-output is attached to the mail). The report runs also in background and generates a spool.
2) A subroutine wich sends a email (input has to be in an itab)
Now I try to put them together.
Question: How can I automate the send process?
I did a little bit of debugging, but got lost in the SAP Office functions.
Any help appreciated!
Thomas
Hi Michael,
thank you again a helpfull reply. To solve the issue I ended up writing a second little report.
Here is a short description of my solution just in case anybody else is also interested in.
I set up a Job with two steps.
Step 1 is the ABAP that creates e.g. a ALV output (anything that goes to spool).
Step 2 is a little ABAP that does nothing else than reading the output of step 1 (Spool) and send it as SAP Office Document. (To be a little more flexible I added some selection criterias for step 2 like Jobstep number, receiver, sendmode, ...).
It works fine online (by keying in the spool number manually) and in batch mode (by determining the spool number based on the job number). I think this solution is flexible and lightwight.
Kind regards,
Thomas
Message was edited by: Thomas Hager
Message was edited by: Thomas Hager
Similar Messages
-
Error while sending PO output through mail in PDF format - Urgent
Dear friends,
Developed program to send sapscript output through mail in pdf format, the program running properly, even function module SO_NEW_DOCUMENT_ATT_SEND_API1 returning sy-subrc 0. But the external mail is not going to user lying in SAP outbox with message <b>"Wait for communications service"</b> . SCOT is properly configured, tested mails sending through SAP office.
Find below the source code:
REPORT zmm_porder_gm
NO STANDARD PAGE HEADING.
TABLES: ekko, ekpa, t161t, t052, komv, j_1imocomp, t001, esll.
Internal Tables
DATA : txt LIKE tline-tdline, "HEADER LINE
your_ref LIKE ekko-ihrez, "your ref
our_ref LIKE ekko-unsez, "our ref
mcompname LIKE t001-butxt,
itemname LIKE ekpo-txz01,
del_text LIKE tline-tdline, "delivery text
mat_po_text LIKE tline-tdline. "material po text
DATA: g_ind TYPE i.
DATA: it_esll LIKE esll OCCURS 0 WITH HEADER LINE.
DATA: sub_packno LIKE esll-sub_packno.
DATA : po_flag(1) TYPE c.
DATA : it_erev LIKE erev OCCURS 0 WITH HEADER LINE.
DATA : nmebeln LIKE thead-tdname,
obj LIKE thead-tdname.
DATA : tline LIKE tline OCCURS 0 WITH HEADER LINE. "HEADER TEXT
DATA : it_ekko LIKE ekko OCCURS 0 WITH HEADER LINE.
DATA : it_ekpo LIKE ekpo OCCURS 0 WITH HEADER LINE.
DATA : it_zmm_porder LIKE zmm_porder OCCURS 0 WITH HEADER LINE.
DATA : it_konv LIKE konv OCCURS 0 WITH HEADER LINE.
DATA : it_konv_ftr LIKE konv OCCURS 0 WITH HEADER LINE.
DATA : it_konv_rate LIKE konv OCCURS 0 WITH HEADER LINE.
DATA : it_komv_tax LIKE komv OCCURS 0 WITH HEADER LINE. " For Tax Calculation
DATA : it_zmm_house_bank LIKE zmm_house_bank OCCURS 0 WITH HEADER LINE.
*DATA : mrate TYPE konv-kbetr VALUE 0, mrate1(15). rmoved by ganes and added following logic
DATA : mrate TYPE p VALUE 0 DECIMALS 2, mrate1(15).
DATA : mrate_gm TYPE p DECIMALS 2.
DATA : BEGIN OF it_konv1 OCCURS 0,
knumv LIKE konv-knumv,
kschl LIKE konv-kschl,
END OF it_konv1.
DATA : BEGIN OF it_t052u OCCURS 0.
INCLUDE STRUCTURE t052u.
DATA : END OF it_t052u.
DATA : mpay_terms LIKE t052u-text1.
DATA : mwaers LIKE konv-waers.
DATA : BEGIN OF xt052 OCCURS 0.
INCLUDE STRUCTURE t052.
DATA : END OF xt052.
DATA : it_t16ct LIKE t16ct OCCURS 0 WITH HEADER LINE.
DATA : BEGIN OF ztext OCCURS 0.
INCLUDE STRUCTURE ttext.
DATA : END OF ztext.
DATA : it_t001 LIKE t001 OCCURS 0 WITH HEADER LINE.
DATA : mtext(15) TYPE c.
DATA : it_adrc LIKE adrc OCCURS 0 WITH HEADER LINE.
DATA : it_adrc_ven LIKE adrc OCCURS 0 WITH HEADER LINE.
DATA : it_adrc_plt LIKE adrc OCCURS 0 WITH HEADER LINE.
DATA : it_makt LIKE makt OCCURS 0 WITH HEADER LINE.
DATA : it_eket LIKE eket OCCURS 0 WITH HEADER LINE. " Schedulling
DATA : it_eikp LIKE eikp OCCURS 0 WITH HEADER LINE. " Export
DATA : it_t001w LIKE t001w OCCURS 0 WITH HEADER LINE.
DATA : it_t685t LIKE t685t OCCURS 0 WITH HEADER LINE.
DATA : it_t618t LIKE t618t OCCURS 0 WITH HEADER LINE.
DATA : it_t685t_ftr LIKE t685t OCCURS 0 WITH HEADER LINE.
DATA : it_lfa1 LIKE lfa1 OCCURS 0 WITH HEADER LINE.
DATA : it_bapi_mltx_ga LIKE bapi_mltx_ga OCCURS 0 WITH HEADER LINE. "Material long text
DATA : mfirst TYPE i VALUE 0,
mpay_flag(1) TYPE c VALUE 'X',
mwerks LIKE t001w-werks,
msr TYPE i VALUE 0,
l_rate TYPE p DECIMALS 2 VALUE 0,
l_amt TYPE p DECIMALS 2 VALUE 0,
mflag(1) TYPE c,
mlctr TYPE i VALUE 0,
mfamt TYPE p DECIMALS 2 VALUE 0,
mcfamt(15) TYPE c,
mfword(100) TYPE c,
mkschl LIKE konv-kschl,
mchgamt TYPE p DECIMALS 2 VALUE 0,
mkbetr TYPE p DECIMALS 2 VALUE 0,
mkwert TYPE p DECIMALS 2 VALUE 0.
DATA : j_1iexcd TYPE j_1imocomp-j_1iexcd,
j_1icstno TYPE j_1imocomp-j_1icstno,
j_1ilstno TYPE j_1imocomp-j_1ilstno.
DATA : mjmop_r TYPE p DECIMALS 2 VALUE 0,
mjmoq_r TYPE p DECIMALS 2 VALUE 0,
mjecs_r TYPE p DECIMALS 2 VALUE 0,
mjvcs_r TYPE p DECIMALS 2 VALUE 0,
mjvrd_r TYPE p DECIMALS 2 VALUE 0,
mjsep_r TYPE p DECIMALS 2 VALUE 0.
DATA : mjmop_a TYPE p DECIMALS 2 VALUE 0,
mjmoq_a TYPE p DECIMALS 2 VALUE 0,
mjecs_a TYPE p DECIMALS 2 VALUE 0,
mjvcs_a TYPE p DECIMALS 2 VALUE 0,
mjvrd_a TYPE p DECIMALS 2 VALUE 0,
mjsep_a TYPE p DECIMALS 2 VALUE 0.
DATA : mtitle LIKE t161t-batxt.
DATA : no_ammend(10),request_by(50),ver_txt(100),ver_reason(100),stext(200).
begin of Email data declarations**************
DATA: BEGIN OF otf OCCURS 0.
INCLUDE STRUCTURE itcoo .
DATA: END OF otf.
DATA: itcpo LIKE itcpo.
DATA: itcpp LIKE itcpp.
DATA: it_docs TYPE STANDARD TABLE OF docs,
v_bin_filesize TYPE i,
it_lines TYPE STANDARD TABLE OF tline,
wa_lines TYPE tline.
DATA : i_pdf LIKE tline OCCURS 1000 WITH HEADER LINE,
v_pdf_bytecount TYPE i,
v_pdf_spoolid TYPE tsp01-rqident,
v_otf_pagecount TYPE i,
v_btc_jobname TYPE tbtcjob-jobname,
v_btc_jobcount TYPE tbtcjob-jobcount.
DATA: objpack LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE.
DATA: objhead LIKE solisti1 OCCURS 1 WITH HEADER LINE.
DATA: objbin LIKE solisti1 OCCURS 0 WITH HEADER LINE.
DATA: objtxt LIKE solisti1 OCCURS 10 WITH HEADER LINE.
DATA: reclist LIKE somlreci1 OCCURS 0 WITH HEADER LINE.
DATA: doc_chng LIKE sodocchgi1.
DATA: tab_lines LIKE sy-tabix.
DATA: vafilename(100) VALUE 'po_output.pdf'.
DATA: jobdata TYPE sxjobdata.
DATA arc_params TYPE arc_params.
DATA print_params TYPE pri_params.
DATA g_send_prog TYPE syrepid VALUE 'ZVF03_TEST_PROG'.
DATA immediate TYPE btcchar1.
DATA: i_jobname TYPE tbtcp-jobname,
i_jobcount TYPE tbtcp-jobcount,
i_jobstepcount TYPE tbtcp-stepcount.
DATA recipient_obj LIKE swotobjid.
CONSTANTS: sx_true TYPE sx_boolean VALUE 'X'.
TABLES: tbtcp.
end of Email data declarations**************
SELECTION-SCREEN : BEGIN OF BLOCK block1 WITH FRAME TITLE text-001.
SELECT-OPTIONS : mebeln FOR ekko-ebeln OBLIGATORY . " 75
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN POSITION 12.
SELECTION-SCREEN COMMENT (20) text-b01.
PARAMETERS: b1 AS CHECKBOX DEFAULT 'X'.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN : END OF BLOCK block1.
SELECTION-SCREEN: BEGIN OF SCREEN 200 TITLE text-001 AS WINDOW.
PARAMETERS : p_email TYPE ad_smtpadr. "E-Mail Address
SELECTION-SCREEN: END OF SCREEN 200.
INITIALIZATION.
SET PF-STATUS 'ZMMPORD_STAT'.
AT SELECTION-SCREEN.
CASE sy-ucomm.
WHEN 'EMAIL'.
PERFORM zemail.
WHEN '&IC1'.
PERFORM load_data.
PERFORM process.
IF NOT p_email IS INITIAL.
PERFORM send_mail.
ENDIF.
ENDCASE.
*START-OF-SELECTION.
PERFORM load_data.
PERFORM process.
FORM load_data .
DATA : gindex LIKE sy-tabix.
SELECT * FROM t16ct INTO TABLE it_t16ct WHERE spras = 'EN'.
SELECT * FROM ekko INTO TABLE it_ekko WHERE ebeln IN mebeln.
IF sy-subrc EQ 0.
SELECT * FROM erev INTO CORRESPONDING FIELDS OF TABLE it_erev FOR ALL ENTRIES IN it_ekko
WHERE edokn = it_ekko-ebeln AND rscod <> '' .
SORT it_erev BY edokn revno DESCENDING.
LOOP AT it_ekko.
IF NOT ( it_ekko-frgke EQ 'O' OR it_ekko-frgke EQ '0' ) .
MESSAGE e000(zsd) WITH 'Purchase Order is not Realeased'.
ENDIF.
ENDLOOP.
SELECT * FROM ekpo INTO TABLE it_ekpo WHERE ebeln IN mebeln.
IF sy-subrc EQ 0.
SELECT * INTO TABLE it_makt
FROM makt
FOR ALL ENTRIES IN it_ekpo
WHERE matnr EQ it_ekpo-matnr.
SELECT * INTO TABLE it_lfa1
FROM lfa1
FOR ALL ENTRIES IN it_ekko
WHERE lifnr EQ it_ekko-lifnr.
ENDIF.
SELECT *
INTO TABLE it_t052u
FROM t052u
FOR ALL ENTRIES IN it_ekko
WHERE zterm EQ it_ekko-zterm
AND spras EQ 'EN'.
IF sy-subrc EQ 0.
SORT it_t052u BY zterm.
ENDIF.
SELECT * FROM eket INTO TABLE it_eket WHERE ebeln IN mebeln.
IF sy-subrc EQ 0.
SORT it_eket BY ebeln ebelp.
ENDIF.
SELECT *
INTO TABLE it_eikp
FROM eikp
FOR ALL ENTRIES IN it_ekko
WHERE exnum EQ it_ekko-exnum.
IF sy-subrc EQ 0.
SORT it_eikp BY exnum.
SELECT *
INTO TABLE it_t618t
FROM t618t
FOR ALL ENTRIES IN it_eikp
WHERE expvz EQ it_eikp-expvz
AND spras EQ 'E'
AND land1 EQ 'IN'.
IF sy-subrc EQ 0.
SORT it_t618t BY expvz.
ENDIF.
ENDIF.
REFRESH : it_zmm_porder.
CLEAR : it_zmm_porder.
SELECT * INTO TABLE it_zmm_porder
FROM zmm_porder
WHERE flag EQ 'L'.
IF sy-subrc EQ 0.
SORT it_zmm_porder BY kschl.
ENDIF.
SELECT * FROM konv INTO TABLE it_konv
FOR ALL ENTRIES IN it_ekko
WHERE knumv = it_ekko-knumv
AND kwert NE 0.
LOOP AT it_konv.
gindex = sy-tabix.
READ TABLE it_zmm_porder WITH KEY kschl = it_konv-kschl BINARY SEARCH.
IF sy-subrc NE 0.
DELETE it_konv INDEX gindex.
ENDIF.
ENDLOOP.
IF sy-subrc EQ 0.
SORT it_konv BY knumv kherk kschl.
ENDIF.
REFRESH : it_zmm_porder.
CLEAR : it_zmm_porder.
SELECT * INTO TABLE it_zmm_porder
FROM zmm_porder
WHERE flag EQ 'F'.
IF sy-subrc EQ 0.
SORT it_zmm_porder BY kschl.
ENDIF.
SELECT * INTO TABLE IT_KONV_FTR FROM KONV
FOR ALL ENTRIES IN IT_EKKO
WHERE KNUMV = IT_EKKO-KNUMV
AND ( KSCHL = 'ZIN1'
OR KSCHL = 'ZIN2'
OR KSCHL = 'ZINS'
OR KSCHL = 'ZPF1'
OR KSCHL = 'ZPF2'
OR KSCHL = 'ZPF3'
OR KSCHL = 'ZPKG'
OR KSCHL = 'ZPKF'
OR KSCHL = 'FRA1'
OR KSCHL = 'FRB1'
OR KSCHL = 'FRC1'
OR KSCHL = 'FRD1'
OR KSCHL = 'FRD2'
OR KSCHL = 'FRD3'
OR KSCHL = 'FRD4'
OR KSCHL = 'FRD5'
*****Added one condition type below ZFBC as on 05.06.2007 :Rajiv as per mail of Sadiq via mathew sir(RTDK906646)
OR KSCHL = 'ZFBC' )
AND KWERT NE 0
AND KPOSN GT '000000'.
AND ( KRECH = 'B' " RTDK906167
OR KRECH = 'A' ).
SELECT * INTO TABLE it_konv_ftr FROM konv
FOR ALL ENTRIES IN it_ekko
WHERE knumv = it_ekko-knumv
AND kwert NE 0
AND kposn GT '000000'.
LOOP AT it_konv_ftr.
gindex = sy-tabix.
READ TABLE it_zmm_porder WITH KEY kschl = it_konv_ftr-kschl BINARY SEARCH.
IF sy-subrc NE 0.
DELETE it_konv_ftr INDEX gindex.
ENDIF.
ENDLOOP.
IF it_konv_ftr[] IS NOT INITIAL.
SORT it_konv_ftr BY knumv kschl.
ENDIF.
SELECT KNUMV KSCHL INTO CORRESPONDING FIELDS OF TABLE IT_KONV1 FROM KONV
FOR ALL ENTRIES IN IT_EKKO
WHERE KNUMV = IT_EKKO-KNUMV
and kherk = 'D'
AND ( KSCHL = 'ZIN1'
OR KSCHL = 'ZIN2'
OR KSCHL = 'ZINS'
OR KSCHL = 'ZPF1'
OR KSCHL = 'ZPF2'
OR KSCHL = 'ZPF3'
OR KSCHL = 'ZPKG'
OR KSCHL = 'ZPKF'
OR KSCHL = 'FRA1'
OR KSCHL = 'FRB1'
OR KSCHL = 'FRC1'
OR KSCHL = 'FRD1'
OR KSCHL = 'FRD2'
OR KSCHL = 'FRD3'
OR KSCHL = 'FRD4'
OR KSCHL = 'FRD5'
*****Added one condition type below ZFBC as on 05.06.2007 :Rajiv as per mail of Sadiq via mathew sir(RTDK906646)
OR KSCHL = 'ZFBC' )
AND KWERT NE 0.
AND ( KRECH = 'B' RTDK906167
OR KRECH = 'A' ).
SELECT knumv kschl INTO CORRESPONDING FIELDS OF TABLE it_konv1 FROM konv
FOR ALL ENTRIES IN it_ekko
WHERE knumv = it_ekko-knumv
AND kwert NE 0.
DELETE ADJACENT DUPLICATES FROM it_konv1 COMPARING knumv kschl.
LOOP AT it_konv1.
gindex = sy-tabix.
READ TABLE it_zmm_porder WITH KEY kschl = it_konv1-kschl BINARY SEARCH.
IF sy-subrc NE 0.
DELETE it_konv1 INDEX gindex.
ENDIF.
ENDLOOP.
IF sy-subrc EQ 0.
SORT it_konv1 BY knumv kschl.
ENDIF.
SELECT * INTO TABLE it_t685t
FROM t685t
FOR ALL ENTRIES IN it_konv
WHERE kschl EQ it_konv-kschl
AND kappl EQ it_konv-kappl
AND spras EQ 'E'.
SELECT * INTO TABLE it_t685t_ftr
FROM t685t
FOR ALL ENTRIES IN it_konv_ftr
WHERE kschl EQ it_konv_ftr-kschl
AND kappl EQ it_konv_ftr-kappl
AND spras EQ 'E'.
it_t685t_ftr-kschl = 'JVCS'.
it_t685t_ftr-vtext = 'IN CST in vat'.
APPEND it_t685t_ftr.
SELECT * INTO TABLE it_zmm_house_bank
FROM zmm_house_bank
WHERE ebeln IN mebeln.
ELSE.
MESSAGE e899(mm) WITH 'Data not found for selection criteria...'.
ENDIF.
ENDFORM. " Load_data
FORM process .
DATA : mctr TYPE i VALUE 1.
DATA : gindex LIKE sy-tabix.
DATA : mline(75) TYPE c.
DATA : mlifn2 LIKE ekpa-lifn2.
DATA : mv_name LIKE lfa1-name1,
madrnr LIKE lfa1-adrnr.
CLEAR itcpo.
itcpo-tdgetotf = 'X'.
CALL FUNCTION 'OPEN_FORM'
EXPORTING
form = 'ZMM_PORDER'
language = sy-langu
OPTIONS = itcpo
dialog = ' '
EXCEPTIONS
OTHERS = 1.
LOOP AT it_ekko.
CALL FUNCTION 'START_FORM'
EXPORTING
form = 'ZMM_PORDER'.
SELECT SINGLE *
FROM t001
INTO it_t001
WHERE bukrs EQ it_ekko-bukrs.
mcompname = it_t001-butxt.
TRANSLATE mcompname TO UPPER CASE.
Document Type
SELECT SINGLE batxt
INTO mtitle
FROM t161t
WHERE bstyp EQ 'F'
AND spras EQ 'E'
AND bsart EQ it_ekko-bsart.
REFRESH it_adrc.
SELECT SINGLE werks
INTO mwerks
FROM ekpo
WHERE ebeln EQ it_ekko-ebeln.
SELECT SINGLE *
INTO it_t001w
FROM t001w
WHERE werks EQ mwerks.
REFRESH it_adrc.
SELECT SINGLE *
INTO it_adrc_plt
FROM adrc
WHERE addrnumber EQ it_t001w-adrnr.
REFRESH : xt052.
mfamt = 0.
msr = 0.
in 500c this statement failed.
SELECT SINGLE * FROM T052 INTO XT052 WHERE ZTERM = IT_EKKO-ZTERM.
CALL FUNCTION 'FI_TEXT_ZTERM'
EXPORTING
I_T052 = XT052
TABLES
T_ZTEXT = ZTEXT.
As per Preeti... Shipment address should be shown on top as purchase order company address. 27.04.
PERFORM writeform USING 'PLANT' 'PLANT'.
SELECT SINGLE name1 adrnr
INTO (mv_name,madrnr)
FROM lfa1
WHERE lifnr EQ it_ekko-lifnr.
REFRESH it_adrc[].
CLEAR it_adrc[].
FREE it_adrc[].
SELECT SINGLE *
INTO it_adrc_ven
FROM adrc
WHERE addrnumber EQ madrnr.
READ TABLE it_lfa1 WITH KEY lifnr = it_ekko-lifnr.
PERFORM writeform USING 'VENDOR' 'VENDOR'.
Shipment
SELECT SINGLE werks
INTO mwerks
FROM ekpo
WHERE ebeln EQ it_ekko-ebeln.
up to 1 rows.
SELECT SINGLE *
INTO it_t001w
FROM t001w
WHERE werks EQ mwerks.
SELECT SINGLE j_1iexcd j_1icstno j_1ilstno
INTO (j_1iexcd,j_1icstno,j_1ilstno)
FROM j_1imocomp
WHERE werks = mwerks.
REFRESH it_adrc.
SELECT SINGLE *
INTO it_adrc
FROM adrc
WHERE addrnumber EQ it_t001w-adrnr.
PERFORM writeform USING 'SHIPMNT' 'SHIPMNT'.
READ TABLE it_eikp WITH KEY exnum = it_ekko-exnum.
IF sy-subrc EQ 0.
READ TABLE it_t618t WITH KEY expvz = it_eikp-expvz.
ENDIF.
your_ref = it_ekko-ihrez.
our_ref = it_ekko-unsez.
READ TABLE it_erev WITH KEY edokn = it_ekko-ebeln.
IF sy-subrc = 0.
no_ammend = it_erev-revno.
request_by = it_erev-crnam.
ver_txt = it_erev-txz01.
READ TABLE it_t16ct WITH KEY rscod = it_erev-rscod.
IF sy-subrc = 0.
ver_reason = it_t16ct-rstxt.
ELSE.
ver_reason = ''.
ENDIF.
ELSE.
no_ammend = ''.
request_by = ''.
ver_txt = ''.
ver_reason = ''.
ENDIF.
PERFORM writeform USING 'PO_INFO' 'PO_INFO'.
IF it_zmm_house_bank[] IS NOT INITIAL.
READ TABLE it_zmm_house_bank INDEX 1.
PERFORM writeform USING 'BANKDTL' 'BANKDTL'.
ENDIF.
PERFORM writeform USING 'HDR_INFO' 'HDR_INFO'.
PERFORM writeform USING 'BRK_TTL' 'MAIN'.
msr = 1.
mlctr = 1.
*added by ganesh to prevent deleted items to appear in print out
LOOP AT IT_EKPO WHERE EBELN EQ IT_EKKO-EBELN.
LOOP AT it_ekpo WHERE ebeln EQ it_ekko-ebeln AND loekz NE 'L'.
*end of change
CLEAR: mrate, mrate1.
SELECT * FROM konv INTO TABLE it_konv_rate
WHERE knumv EQ it_ekko-knumv
AND kposn EQ it_ekpo-ebelp
AND ( kschl EQ 'PBXX' OR kschl EQ 'PB00' OR kschl EQ 'P001' ).
LOOP AT it_konv_rate.
IF it_konv_rate-kpein > 0. " added by ganesh as per sudhir 12.10.2007
mrate_gm = it_konv_rate-kbetr / it_konv_rate-kpein.
mrate = mrate + mrate_gm. " added by ganesh as per sudhir 12.10.2007
ELSE.
mrate = mrate + it_konv_rate-kbetr.
ENDIF.
IF it_konv_rate-waers IS NOT INITIAL.
mwaers = it_konv_rate-waers.
ENDIF.
ENDLOOP.
For Japanies Yen "RTDK906759
IF it_ekko-waers = 'JPY'.
mrate = mrate * 100.
ENDIF.
End for japanies Yen
mrate1 = mrate.
End rate
mfirst = 0.
MFAMT = MFAMT + ( IT_EKPO-NETPR * IT_EKPO-MENGE ).
mfamt = mfamt + ( mrate * it_ekpo-menge ).
PERFORM get_mat_long_text.
DATA: lt_ctr TYPE i VALUE 0,lt_ctr1 TYPE i, lt_count TYPE i VALUE 0. " Long text counter
DESCRIBE TABLE it_bapi_mltx_ga LINES lt_count.
CLEAR it_bapi_mltx_ga.
*Added by Rajiv 10.05.2007 Read and if condition RTDK906165
READ TABLE it_konv WITH KEY knumv = it_ekko-knumv
kposn = it_ekpo-ebelp.
mkbetr = 0.
mkwert = 0.
IF sy-subrc EQ 0.
LOOP AT it_konv WHERE knumv EQ it_ekko-knumv
AND kposn EQ it_ekpo-ebelp.
IF it_konv-krech EQ 'A'.
mkbetr = it_konv-kbetr / 10.
ELSE.
mkbetr = it_konv-kbetr.
ENDIF.
For Japanies Yen "RTDK906759
IF it_ekko-waers = 'JPY'.
mkbetr = mkbetr * 100.
ENDIF.
End for japaies Yen
IF mkbetr LT '0'.
mkbetr = mkbetr * ( -1 ).
ENDIF.
mkwert = it_konv-kwert.
For Japanies Yen "RTDK906759
IF it_ekko-waers = 'JPY'.
mkwert = mkwert * 100.
ENDIF.
End for japaies Yen
mfamt = mfamt + mkwert.
IF mkwert LT '0'.
mkwert = mkwert * ( -1 ).
ENDIF.
IF it_ekpo-matnr IS INITIAL.
itemname = it_ekpo-txz01.
ELSE.
READ TABLE it_makt WITH KEY matnr = it_ekpo-matnr.
itemname = it_makt-maktx.
ENDIF.
READ TABLE it_t685t WITH KEY kschl = it_konv-kschl BINARY SEARCH.
READ TABLE it_eket WITH KEY ebeln = it_ekpo-ebeln
ebelp = it_ekpo-ebelp BINARY SEARCH.
IF mfirst EQ 0.
PERFORM writeform USING 'BRK_INFO' 'MAIN'.
mfirst = 1.
ELSE.
ADD 1 TO lt_ctr.
CLEAR it_bapi_mltx_ga.
READ TABLE it_bapi_mltx_ga INDEX lt_ctr. "For long text
IF sy-subrc NE 0.
CLEAR it_bapi_mltx_ga.
ENDIF.
PERFORM writeform USING 'BRK_INFO1' 'MAIN'.
ENDIF.
mlctr = mlctr + 1.
ENDLOOP. " it_konv.
ELSE.
IF it_ekpo-matnr IS INITIAL.
itemname = it_ekpo-txz01.
ELSE.
READ TABLE it_makt WITH KEY matnr = it_ekpo-matnr.
itemname = it_makt-maktx.
ENDIF.
READ TABLE IT_T685T WITH KEY KSCHL = IT_KONV-KSCHL BINARY SEARCH.
READ TABLE it_eket WITH KEY ebeln = it_ekpo-ebeln
ebelp = it_ekpo-ebelp BINARY SEARCH.
mfirst = 0.
IF mfirst EQ 0.
PERFORM writeform USING 'BRK_INFO' 'MAIN'.
mfirst = 1.
ELSE.
ADD 1 TO lt_ctr.
CLEAR it_bapi_mltx_ga.
READ TABLE it_bapi_mltx_ga INDEX lt_ctr. "For long text
IF sy-subrc NE 0.CLEAR it_bapi_mltx_ga.ENDIF.
PERFORM writeform USING 'BRK_INFO1' 'MAIN'.
ENDIF.
ENDIF.
*Commented by rajiv 10.05.2007 used this code in above condition.
added by ganesh on 260407 to print record
if it_konv is initial.
READ TABLE IT_MAKT WITH KEY MATNR = IT_EKPO-MATNR.
READ TABLE IT_T685T WITH KEY KSCHL = IT_KONV-KSCHL BINARY SEARCH.
READ TABLE IT_EKET WITH KEY EBELN = IT_EKPO-EBELN
EBELP = IT_EKPO-EBELP BINARY SEARCH.
mFirst = 0.
if mFirst eq 0.
PERFORM WRITEFORM USING 'BRK_INFO' 'MAIN'.
mFirst = 1.
else.
add 1 to lt_ctr.
clear it_bapi_mltx_ga.
read table IT_BAPI_MLTX_GA index lt_ctr. "For long text
if sy-subrc ne 0.clear it_bapi_mltx_ga.endif.
PERFORM WRITEFORM USING 'BRK_INFO1' 'MAIN'.
Endif.
endif.
end of change
REFRESH it_komv_tax.
PERFORM get_tax_cal USING it_ekpo-ebeln
it_ekpo-ebelp.
Changing it_komv_tax.
REFRESH : it_zmm_porder.
CLEAR : it_zmm_porder.
SELECT * INTO TABLE it_zmm_porder
FROM zmm_porder
WHERE flag EQ 'T'.
IF sy-subrc EQ 0.
SORT it_zmm_porder BY kschl.
ENDIF.
LOOP AT it_komv_tax.
gindex = sy-tabix.
READ TABLE it_zmm_porder WITH KEY kschl = it_komv_tax-kschl BINARY SEARCH.
IF sy-subrc NE 0.
DELETE it_komv_tax INDEX gindex.
ENDIF.
ENDLOOP.
LOOP AT it_komv_tax WHERE kwert IS NOT INITIAL.
IF ( IT_KOMV_TAX-KSCHL EQ 'JMOP' OR
IT_KOMV_TAX-KSCHL EQ 'JECS' OR
IT_KOMV_TAX-KSCHL EQ 'JSEP' OR
IT_KOMV_TAX-KSCHL EQ 'JMOQ' OR
IT_KOMV_TAX-KSCHL EQ 'JVCS' OR
IT_KOMV_TAX-KSCHL EQ 'JVRD' OR
IT_KOMV_TAX-KSCHL EQ 'JMIP' OR
* IT_KOMV_TAX-KSCHL EQ 'JEIP' OR
IT_KOMV_TAX-KSCHL EQ 'JSEI' OR
IT_KOMV_TAX-KSCHL EQ 'JSRT' OR
IT_KOMV_TAX-KSCHL EQ 'JEC3' OR
IT_KOMV_TAX-KSCHL EQ 'JVRN' )
AND IT_KOMV_TAX-KWERT IS NOT INITIAL.
SELECT SINGLE vtext
INTO mtext
FROM t685t
WHERE kschl EQ it_komv_tax-kschl
AND spras EQ 'E'.
l_rate = it_komv_tax-kbetr / 10.
l_amt = it_komv_tax-kwert.
For Japanies Yen "RTDK906759
IF it_ekko-waers = 'JPY'.
l_amt = l_amt * 100.
ENDIF.
End for japaies Yen
ADD l_amt TO mfamt.
IF lt_ctr LT lt_count. "Long text
ADD 1 TO lt_ctr.
READ TABLE it_bapi_mltx_ga INDEX lt_ctr.
ELSE.
CLEAR it_bapi_mltx_ga.
ENDIF.
IF l_rate EQ 0 OR l_amt EQ 0.
l_rate = ''.
l_amt = ''.
ENDIF.
PERFORM writeform USING 'TAX_LINE_ITEM' 'MAIN'.
ENDIF.
ENDLOOP.
IF lt_ctr LT lt_count.
DATA mbal_line TYPE i.
mbal_line = ( lt_count - lt_ctr ).
DO mbal_line TIMES.
ADD 1 TO lt_ctr.
READ TABLE it_bapi_mltx_ga INDEX lt_ctr.
IF sy-subrc = 0.
PERFORM writeform USING 'LTEXT' 'MAIN'.
ENDIF.
ENDDO.
ENDIF.
CONCATENATE it_ekko-ebeln it_ekpo-ebelp INTO nmebeln.
REFRESH tline.
CALL FUNCTION 'READ_TEXT'
EXPORTING
id = 'F04'
language = sy-langu
name = nmebeln
object = 'EKPO'
TABLES
lines = tline
EXCEPTIONS
id = 1
language = 2
name = 3
not_found = 4
object = 5
reference_check = 6
wrong_access_to_archive = 7
OTHERS = 8.
IF sy-subrc <> 0.
ENDIF.
LOOP AT tline.
IF tline-tdline IS NOT INITIAL.
del_text = tline-tdline.
ENDIF.
CONDENSE del_text.
ENDLOOP.
CONCATENATE it_ekko-ebeln it_ekpo-ebelp INTO nmebeln.
REFRESH tline.
CALL FUNCTION 'READ_TEXT'
EXPORTING
id = 'F03'
language = sy-langu
name = nmebeln
object = 'EKPO'
TABLES
lines = tline
EXCEPTIONS
id = 1
language = 2
name = 3
not_found = 4
object = 5
reference_check = 6
wrong_access_to_archive = 7
OTHERS = 8.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
refresh.
CLEAR : po_flag, mat_po_text.
LOOP AT tline.
IF tline-tdline IS NOT INITIAL.
MOVE tline-tdline TO mat_po_text.
CONDENSE mat_po_text.
PERFORM writeform USING 'MTRL_PO_TEXT' 'MAIN'.
po_flag = 'X'.
CLEAR : mat_po_text.
ENDIF.
ENDLOOP.
*Added lines below for Schedule delivery for line item on 09.05.2007:Rajiv
CLEAR g_ind.
READ TABLE it_eket WITH KEY ebeln = it_ekpo-ebeln
ebelp = it_ekpo-ebelp BINARY SEARCH.
g_ind = sy-tabix.
LOOP AT it_eket FROM g_ind.
IF it_eket-ebeln EQ it_ekpo-ebeln AND it_eket-ebelp = it_ekpo-ebelp.
PERFORM writeform USING 'SCHEDULE' 'MAIN'.
ELSE.
EXIT.
ENDIF.
ENDLOOP.
*End Addition:Rajiv
PERFORM writeform USING 'REQSLP' 'MAIN'.
mlctr = mlctr + 1.
msr = msr + 1.
CLEAR: lt_ctr, lt_ctr1.
following lines added by ganesh to add service po details as per Mr. sadiq 21.08.2007
IF it_ekpo-packno IS NOT INITIAL.
CLEAR sub_packno.
SELECT SINGLE sub_packno INTO sub_packno FROM esll WHERE packno = it_ekpo-packno.
IF sub_packno IS NOT INITIAL.
CLEAR it_esll.
REFRESH it_esll.
SELECT * FROM esll INTO CORRESPONDING FIELDS OF TABLE it_esll
WHERE packno = sub_packno.
IF sy-subrc = 0.
PERFORM writeform USING 'SERVICE_PO_TEXT' 'MAIN'.
ENDIF.
LOOP AT it_esll.
CONCATENATE sub_packno it_esll-introw INTO obj.
CALL FUNCTION 'READ_TEXT' "4500002446 C300
EXPORTING
id = 'LTXT'
language = sy-langu
name = obj
object = 'ESLL'
TABLES
lines = tline
EXCEPTIONS
id = 1
language = 2
name = 3
not_found = 4
object = 5
reference_check = 6
wrong_access_to_archive = 7
OTHERS = 8.
IF sy-subrc <> 0.
ENDIF.
CLEAR stext.
LOOP AT tline.
CONCATENATE stext tline-tdline INTO stext SEPARATED BY space.
ENDLOOP.
FREE tline.
CLEAR tline.
REFRESH tline.
PERFORM writeform USING 'SERVICE_PO' 'MAIN'.
PERFORM writeform USING 'SERVICE_TEXT' 'MAIN'.
ENDLOOP.
ENDIF.
ENDIF.
end of change
ENDLOOP. " it_ekpo.
IF mlctr < 15.
DO 5 TIMES.
PERFORM writeform USING 'LINEFEED' 'MAIN'.
ENDDO.
ENDIF.
added by ganesh for allding line before ECC No.
IF it_ekko-bsart NE 'ZIM'. " IF EXPORT NO NEED TO PRINT ECC.
PERFORM writeform USING 'LIN' 'MAIN'.
PERFORM writeform USING 'WERKS_TAX_DETAIL' 'MAIN'.
ENDIF.
end of change
MFLAG = 'Y'.
PERFORM writeform USING 'TERMS_VAL' 'MAIN'.
LOOP AT it_konv1 WHERE knumv EQ it_ekko-knumv.
mkschl = it_konv1-kschl.
mchgamt = 0.
LOOP AT it_konv_ftr WHERE knumv EQ it_konv1-knumv
AND kschl EQ mkschl.
mchgamt = mchgamt + it_konv_ftr-kwert.
ENDLOOP.
For Japanies Yen "RTDK906759
IF it_ekko-waers = 'JPY'.
mchgamt = mchgamt * 100.
ENDIF.
End for japaies Yen
mfamt = mfamt + mchgamt.
IF mchgamt LT '0'.
mchgamt = mchgamt * ( -1 ).
ENDIF.
READ TABLE it_t685t_ftr WITH KEY kschl = mkschl.
PERFORM writeform USING 'TERMS_FTR_VAL' 'MAIN'.
mlctr = mlctr + 1.
ENDLOOP.
mflag = 'T'.
CALL FUNCTION 'HR_IN_CHG_INR_WRDS'
EXPORTING
amt_in_num = mfamt
IMPORTING
amt_in_words = mfword
EXCEPTIONS
data_type_mismatch = 1
OTHERS = 2.
CONDENSE mebeln.
nmebeln = it_ekko-ebeln.
REFRESH tline.
CALL FUNCTION 'READ_TEXT'
EXPORTING
id = 'F01'
language = sy-langu
name = nmebeln
object = 'EKKO'
TABLES
lines = tline
EXCEPTIONS
id = 1
language = 2
name = 3
not_found = 4
object = 5
reference_check = 6
wrong_access_to_archive = 7
OTHERS = 8.
IF sy-subrc <> 0.
ENDIF.
*---- CHANGED BY MATHEW BECAUSE THIS STATMENT WORKING FINE IN 300 BUT NOT IN 500C.
LOOP AT ZTEXT.
IF ZTEXT-TEXT1 IS NOT INITIAL.
PERFORM WRITEFORM USING 'TERMS_COND_VAL_PAY' 'MAIN'.
ENDIF.
MPAY_FLAG = 'Y'.
ENDLOOP.
READ TABLE it_t052u WITH KEY zterm = it_ekko-zterm.
LOOP AT it_t052u WHERE zterm EQ it_ekko-zterm.
IF it_t052u-text1 IS NOT INITIAL.
PERFORM writeform USING 'TERMS_COND_VAL_PAY' 'MAIN'.
ENDIF.
mpay_flag = 'Y'.
ENDLOOP.
PERFORM writeform USING 'TERMS_COND_VAL' 'MAIN'.
LOOP AT tline.
IF tline-tdline IS NOT INITIAL.
PERFORM writeform USING 'TERMS_COND_VAL_HDR' 'MAIN'.
ENDIF.
CONDENSE txt.
ENDLOOP.
PERFORM writeform USING 'FTR' 'FTR_LIN3'.
PERFORM writeform USING 'FTR_LIN1' 'FTR_LIN1'.
CALL FUNCTION 'END_FORM'.
ENDLOOP. " It_ekko.
CALL FUNCTION 'CLOSE_FORM'
IMPORTING
RESULT = itcpp
RDI_RESULT =
TABLES
otfdata = otf
EXCEPTIONS
unopened = 1
bad_pageformat_for_print = 2
send_error = 3
spool_error = 4
codepage = 5
OTHERS = 6.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " Process
*& Form WRITEFORM
text
-->P_0150 text
-->P_0151 text
FORM writeform USING value(p_0150)
value(p_0151).
CALL FUNCTION 'WRITE_FORM'Hi
I think some basis related configuartions to be done
Try like this and inform me
A cyclic job runs, which processes the messages seen in the SOST queue.
Are you sure it's not the frequency of the cyclic job, rather than the
number of messages in the queue, that you are observing? In messages
that are queued and before the cyclic job runs, "wait for comm. service"
is the normal status.
If you mean that there are always 4 items queued in SOST regardless of
the cyclic send job, then I have no ideas. I would have thought there
was no way to do that.
when the send job runs it just never
picks them up & sends them, while it picks up many others. The send job
is somehow blind to these; no error message occurs. In this case, I
'delete' them from the queue (in SOST) and then 'undelete' (drop down
menu -> /Go to /Deleted Items) them and then re-queue them. THEN they
actually get picked up & sent when the next cyclic send job executes.
Regards
Pavan -
Very urjent how to send report output in mail
hi experts,
how to send report output in mail which function module should i use wht parameters should i pass.
thanks in addavnce,
points to be awarded.CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING
destination = '026c'
copies = count
list_name = 'VATS_ASBUILT'
list_text = v_list
immediately = 'X'
release = 'X'
new_list_id = 'X'
expiration = days
line_size = 132
line_count = 65
layout = 'X_65_132'
* sap_cover_page = 'X'
* cover_page = 'X'
receiver = 'SAP*'
department = 'VATS'
no_dialog = 'X'
IMPORTING
out_parameters = params
valid = valid.
SUBMIT zppr_vats_asbuilt WITH p_aufnr EQ v_aufnr
TO SAP-SPOOL WITHOUT SPOOL DYNPRO
SPOOL PARAMETERS params
AND RETURN.
SELECT SINGLE rqident FROM tsp01 INTO l_spoolno
WHERE rqtitle = v_list .
* convert report to PDF format
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
EXPORTING
src_spoolid = l_spoolno
no_dialog = 'X'
TABLES
pdf = l_ipdf
EXCEPTIONS
err_no_abap_spooljob = 1
err_no_spooljob = 2
err_no_permission = 3
err_conv_not_possible = 4
err_bad_destdevice = 5
user_cancelled = 6
err_spoolerror = 7
err_temseerror = 8
err_btcjob_open_failed = 9
err_btcjob_submit_failed = 10
err_btcjob_close_failed = 11
OTHERS = 12.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
EXIT .
ENDIF.
Now comes the part to send the mail
try.
* -------- create persistent send request ------------------------
send_request = cl_bcs=>create_persistent( ).
clear document.
* -------- create and set document with attachment ---------------
* create document from internal table with text
document = cl_document_bcs=>create_document(
i_type = 'RAW'
i_text = text
i_length = '12'
i_subject = '' ).
*changing the content of the attachment
binary_content[] = l_iobjbin[].
*change the name of the PDF attachment
concatenate 'Build ID' s_buildid_i 'Rev' v_buildid_rev
into i_att_sub separated by space.
* add attachment to document
call method document->add_attachment
exporting
i_attachment_type = 'PDF'
i_attachment_subject = i_att_sub
i_att_content_hex = binary_content.
*setting the option to send an e-mail more than 50 characters
call method send_request->set_message_subject
exporting
ip_subject = t_sub.
* add document to send request
call method send_request->set_document
exporting
i_document = document.
* --------- set sender -------------------------------------------
* note: this is necessary only if you want to set the sender
* different from actual user (SY-UNAME). Otherwise sender is
* set automatically with actual user.
sender = cl_sapuser_bcs=>create( 'VATSUPPORT' ).
call method send_request->set_sender
exporting
i_sender = sender.
*Send the list based on receivers list obtained
loop at l_ireclist.
AD_SMTPADR = l_ireclist-receiver.
* --------- add recipient (e-mail address) -----------------------
* create recipient - please replace e-mail address !!!
recipient = cl_cam_address_bcs=>create_internet_address(
AD_SMTPADR ).
* add recipient with its respective attributes to send request
call method send_request->add_recipient
exporting
i_recipient = recipient
i_express = 'X'.
ENDLOOP.
call method send_request->set_status_attributes
exporting
i_requested_status = 'E'
i_status_mail = 'E'.
* To send the mail immediately
call method send_request->set_send_immediately( 'X' ).
* ---------- send document ---------------------------------------
call method send_request->send( ).
commit work. -
Data of alv report in excel file in background processing using open datas
Hi Experts,
I have developed report for purchase register . if i execute this report in background process i am not able to get the downloaded file in excel and output is also not coming properly, columns are going to overlap.
i used open dataset read dataset and close dataset but still problem is not solved. so if anyone have code with this and also which will have concatenate statement in the code send it.
Regards,
RahulHi Rahul,
Ur code shud be like below:
DATA : l_filename2 TYPE string,
v_extn.
SPLIT p_filename AT '.xls' INTO l_filename2 v_extn.
CONCATENATE l_filename2 'downloaded' INTO l_filename2 SEPARATED BY '_'.
CONCATENATE l_filename2 'txt' INTO l_filename2 SEPARATED BY '.'.
OPEN DATASET l_filename2 IN TEXT MODE FOR OUTPUT ENCODING DEFAULT.
IF sy-subrc <> 0.
MESSAGE e499(sy) WITH text-e02.
ENDIF.
LOOP AT it_order_number INTO wa_order_number.
TRANSFER wa_order_number TO l_filename2.
ENDLOOP.
CLOSE DATASET l_filename2.
Now, go to tcode AL11 and check it in the Application server itself.
Hope this helps,
Regards,
Arnab. -
Hi, im tring to use the SO_DOCUMENT_SEND_API1 FM to send a smartform output by mail. Im able to convert the smartform output to pdf and save it to teh hard drive and works great but when i try to send the pdf doc by mail it comes corrupted... can anyone help me on this... heres a piece of my code
call function 'CONVERT_OTF'
EXPORTING
format = 'PDF'
max_linewidth = 132
IMPORTING
bin_filesize = v_len_in
TABLES
otf = i_otf
lines = i_tline
EXCEPTIONS
err_max_linewidth = 1
err_format = 2
err_conv_not_possible = 3
others = 4.
* Fehlerhandling
if sy-subrc <> 0.
endif.
******* I THINK THE ERROR MAYBE ON THIS PIECE OF CODE ************
loop at i_tline.
translate i_tline using ' ~'.
concatenate wa_buffer i_tline into wa_buffer.
endloop.
translate wa_buffer using '~ '.
do.
i_record = wa_buffer.
append i_record.
shift wa_buffer left by 255 places.
if wa_buffer is initial.
exit.
endif.
enddo.
***************** it message ****************************************
refresh it_message.
it_message = 'Em anexo vai a tabela interna de utilizadores '.
APPEND it_message.
it_message = 'Clique no link '.
APPEND it_message.
**************** Assunto do Email *****************
* Fill the document data and get size of attachment
CLEAR w_doc_data.
DESCRIBE TABLE It_message LINES x.
READ TABLE It_message INDEX x.
w_doc_data-DOC_SIZE =
( x - 1 ) * 255 + STRLEN( It_message ).
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = 'ASSUNTO EMAIL'.
w_doc_data-sensitivty = 'F'.
************************ fim assunto email *********************
data linha type i.
data lv_cntl type i.
CLEAR t_attachment.
REFRESH t_attachment.
************************** Mensagem ******************
* Describe the body of the message
CLEAR t_packing_list.
REFRESH t_packing_list.
clear t_packing_list-transf_bin.
t_packing_list-head_start = 1.
t_packing_list-head_num = 0.
t_packing_list-body_start = 1.
describe table it_message lines t_packing_list-body_num.
t_packing_list-doc_type = 'RAW'.
APPEND t_packing_list.
***************************-Filling the attch table with data *************************
CLEAR : L_TABLE_LINES.
* clear wa_objhead.
* loop at i_record.
t_attachment[] = i_tline[].
* append t_attachment.
* endloop.
* Create attachment notification
t_packing_list-transf_bin = 'X'.
t_packing_list-head_start = 1.
t_packing_list-head_num = 1.
t_packing_list-body_start = 1.
DESCRIBE TABLE t_attachment LINES L_TABLE_LINES.
t_packing_list-body_num = L_TABLE_LINES.
t_packing_list-obj_descr = 'output'.
t_packing_list-doc_type = 'BIN'.
t_packing_list-doc_size = L_TABLE_LINES * 255.
t_packing_list-obj_langu = sy-langu.
t_packing_list-obj_name = 'Teste'.
APPEND t_packing_list.
*************** Endereços de email dos destinatários *************************
CLEAR receivers.
REFRESH receivers.
receivers-receiver = '[email protected]'.
receivers-rec_type = 'U'.
receivers-com_type = 'INT'.
receivers-notif_del = 'X'.
receivers-EXPRESS = 'X'.
* receivers-notif_ndel = 'X'.
APPEND receivers.
************************Fim de email dos Dest. ******************************
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
EXPORTING
DOCUMENT_DATA = w_doc_data
PUT_IN_OUTBOX = 'X'
* SENDER_ADDRESS = ld_sender_address
* SENDER_ADDRESS_TYPE = ld_sender_address_type
COMMIT_WORK = 'X'
IMPORTING
SENT_TO_ALL = w_sent_all
* NEW_OBJECT_ID =
* SENDER_ID =
TABLES
PACKING_LIST = t_packing_list
* OBJECT_HEADER = wa_objhead
CONTENTS_BIN = t_attachment
CONTENTS_TXT = it_message
* CONTENTS_HEX = contents_hex
* OBJECT_PARA =
* OBJECT_PARB =
RECEIVERS = receivers
EXCEPTIONS
TOO_MANY_RECEIVERS = 1
DOCUMENT_NOT_SENT = 2
DOCUMENT_TYPE_NOT_EXIST = 3
OPERATION_NO_AUTHORIZATION = 4
PARAMETER_ERROR = 5
X_ERROR = 6
ENQUEUE_ERROR = 7
OTHERS = 8.
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
wait up to 2 seconds.
if sy-subrc eq 0.
submit rsconn01 "with mode = 'INT'
*with output = 'X'
and return.
endif.Hi Joao,
Try using this code .
*& Report ZSPOOLTOPDF *
*& Converts spool request into PDF document and emails it to *
*& recipicant. *
*& Execution *
*& This program must be run as a background job in-order for the write *
*& commands to create a Spool request rather than be displayed on *
*& screen *
REPORT zspooltopdf.
PARAMETER: p_email1 LIKE somlreci1-receiver
DEFAULT '[email protected]',
p_sender LIKE somlreci1-receiver
DEFAULT '[email protected]',
p_delspl AS CHECKBOX.
*DATA DECLARATION
DATA: gd_recsize TYPE i.
Spool IDs
TYPES: BEGIN OF t_tbtcp.
INCLUDE STRUCTURE tbtcp.
TYPES: END OF t_tbtcp.
DATA: it_tbtcp TYPE STANDARD TABLE OF t_tbtcp INITIAL SIZE 0,
wa_tbtcp TYPE t_tbtcp.
Job Runtime Parameters
DATA: gd_eventid LIKE tbtcm-eventid,
gd_eventparm LIKE tbtcm-eventparm,
gd_external_program_active LIKE tbtcm-xpgactive,
gd_jobcount LIKE tbtcm-jobcount,
gd_jobname LIKE tbtcm-jobname,
gd_stepcount LIKE tbtcm-stepcount,
gd_error TYPE sy-subrc,
gd_reciever TYPE sy-subrc.
DATA: w_recsize TYPE i.
DATA: gd_subject LIKE sodocchgi1-obj_descr,
it_mess_bod LIKE solisti1 OCCURS 0 WITH HEADER LINE,
it_mess_att LIKE solisti1 OCCURS 0 WITH HEADER LINE,
gd_sender_type LIKE soextreci1-adr_typ,
gd_attachment_desc TYPE so_obj_nam,
gd_attachment_name TYPE so_obj_des.
Spool to PDF conversions
DATA: gd_spool_nr LIKE tsp01-rqident,
gd_destination LIKE rlgrap-filename,
gd_bytecount LIKE tst01-dsize,
gd_buffer TYPE string.
Binary store for PDF
DATA: BEGIN OF it_pdf_output OCCURS 0.
INCLUDE STRUCTURE tline.
DATA: END OF it_pdf_output.
CONSTANTS: c_dev LIKE sy-sysid VALUE 'DEV',
c_no(1) TYPE c VALUE ' ',
c_device(4) TYPE c VALUE 'LOCL'.
*START-OF-SELECTION.
START-OF-SELECTION.
Write statement to represent report output. Spool request is created
if write statement is executed in background. This could also be an
ALV grid which would be converted to PDF without any extra effort
WRITE 'Hello World'.
new-page.
commit work.
new-page print off.
IF sy-batch EQ 'X'.
PERFORM get_job_details.
PERFORM obtain_spool_id.
Alternative way could be to submit another program and store spool
id into memory, will be stored in sy-spono.
*submit ZSPOOLTOPDF2
to sap-spool
spool parameters %_print
archive parameters %_print
without spool dynpro
and return.
Get spool id from program called above
IMPORT w_spool_nr FROM MEMORY ID 'SPOOLTOPDF'.
PERFORM convert_spool_to_pdf.
PERFORM process_email.
if p_delspl EQ 'X'.
PERFORM delete_spool.
endif.
IF sy-sysid = c_dev.
wait up to 5 seconds.
SUBMIT rsconn01 WITH mode = 'INT'
WITH output = 'X'
AND RETURN.
ENDIF.
ELSE.
SKIP.
WRITE:/ 'Program must be executed in background in-order for spool',
'request to be created.'.
ENDIF.
FORM obtain_spool_id *
FORM obtain_spool_id.
CHECK NOT ( gd_jobname IS INITIAL ).
CHECK NOT ( gd_jobcount IS INITIAL ).
SELECT * FROM tbtcp
INTO TABLE it_tbtcp
WHERE jobname = gd_jobname
AND jobcount = gd_jobcount
AND stepcount = gd_stepcount
AND listident <> '0000000000'
ORDER BY jobname
jobcount
stepcount.
READ TABLE it_tbtcp INTO wa_tbtcp INDEX 1.
IF sy-subrc = 0.
message s004(zdd) with gd_spool_nr.
gd_spool_nr = wa_tbtcp-listident.
MESSAGE s004(zdd) WITH gd_spool_nr.
ELSE.
MESSAGE s005(zdd).
ENDIF.
ENDFORM.
FORM get_job_details *
FORM get_job_details.
Get current job details
CALL FUNCTION 'GET_JOB_RUNTIME_INFO'
IMPORTING
eventid = gd_eventid
eventparm = gd_eventparm
external_program_active = gd_external_program_active
jobcount = gd_jobcount
jobname = gd_jobname
stepcount = gd_stepcount
EXCEPTIONS
no_runtime_info = 1
OTHERS = 2.
ENDFORM.
FORM convert_spool_to_pdf *
FORM convert_spool_to_pdf.
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
EXPORTING
src_spoolid = gd_spool_nr
no_dialog = c_no
dst_device = c_device
IMPORTING
pdf_bytecount = gd_bytecount
TABLES
pdf = it_pdf_output
EXCEPTIONS
err_no_abap_spooljob = 1
err_no_spooljob = 2
err_no_permission = 3
err_conv_not_possible = 4
err_bad_destdevice = 5
user_cancelled = 6
err_spoolerror = 7
err_temseerror = 8
err_btcjob_open_failed = 9
err_btcjob_submit_failed = 10
err_btcjob_close_failed = 11
OTHERS = 12.
CHECK sy-subrc = 0.
Transfer the 132-long strings to 255-long strings
LOOP AT it_pdf_output.
TRANSLATE it_pdf_output USING ' ~'.
CONCATENATE gd_buffer it_pdf_output INTO gd_buffer.
ENDLOOP.
TRANSLATE gd_buffer USING '~ '.
DO.
it_mess_att = gd_buffer.
APPEND it_mess_att.
SHIFT gd_buffer LEFT BY 255 PLACES.
IF gd_buffer IS INITIAL.
EXIT.
ENDIF.
ENDDO.
ENDFORM.
FORM process_email *
FORM process_email.
DESCRIBE TABLE it_mess_att LINES gd_recsize.
CHECK gd_recsize > 0.
PERFORM send_email USING p_email1.
perform send_email using p_email2.
ENDFORM.
FORM send_email *
--> p_email *
FORM send_email USING p_email.
CHECK NOT ( p_email IS INITIAL ).
REFRESH it_mess_bod.
Default subject matter
gd_subject = 'Subject'.
gd_attachment_desc = 'Attachname'.
CONCATENATE 'attach_name' ' ' INTO gd_attachment_name.
it_mess_bod = 'Message Body text, line 1'.
APPEND it_mess_bod.
it_mess_bod = 'Message Body text, line 2...'.
APPEND it_mess_bod.
If no sender specified - default blank
IF p_sender EQ space.
gd_sender_type = space.
ELSE.
gd_sender_type = 'INT'.
ENDIF.
Send file by email as .xls speadsheet
PERFORM send_file_as_email_attachment
tables it_mess_bod
it_mess_att
using p_email
'Example .xls documnet attachment'
'PDF'
gd_attachment_name
gd_attachment_desc
p_sender
gd_sender_type
changing gd_error
gd_reciever.
ENDFORM.
FORM delete_spool *
FORM delete_spool.
DATA: ld_spool_nr TYPE tsp01_sp0r-rqid_char.
ld_spool_nr = gd_spool_nr.
CHECK p_delspl <> c_no.
CALL FUNCTION 'RSPO_R_RDELETE_SPOOLREQ'
EXPORTING
spoolid = ld_spool_nr.
ENDFORM.
*& Form SEND_FILE_AS_EMAIL_ATTACHMENT
Send email
FORM send_file_as_email_attachment tables it_message
it_attach
using p_email
p_mtitle
p_format
p_filename
p_attdescription
p_sender_address
p_sender_addres_type
changing p_error
p_reciever.
DATA: ld_error TYPE sy-subrc,
ld_reciever TYPE sy-subrc,
ld_mtitle LIKE sodocchgi1-obj_descr,
ld_email LIKE somlreci1-receiver,
ld_format TYPE so_obj_tp ,
ld_attdescription TYPE so_obj_nam ,
ld_attfilename TYPE so_obj_des ,
ld_sender_address LIKE soextreci1-receiver,
ld_sender_address_type LIKE soextreci1-adr_typ,
ld_receiver LIKE sy-subrc.
data: t_packing_list like sopcklsti1 occurs 0 with header line,
t_contents like solisti1 occurs 0 with header line,
t_receivers like somlreci1 occurs 0 with header line,
t_attachment like solisti1 occurs 0 with header line,
t_object_header like solisti1 occurs 0 with header line,
w_cnt type i,
w_sent_all(1) type c,
w_doc_data like sodocchgi1.
ld_email = p_email.
ld_mtitle = p_mtitle.
ld_format = p_format.
ld_attdescription = p_attdescription.
ld_attfilename = p_filename.
ld_sender_address = p_sender_address.
ld_sender_address_type = p_sender_addres_type.
Fill the document data.
w_doc_data-doc_size = 1.
Populate the subject/generic message attributes
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle .
w_doc_data-sensitivty = 'F'.
Fill the document data and get size of attachment
CLEAR w_doc_data.
READ TABLE it_attach INDEX w_cnt.
w_doc_data-doc_size =
( w_cnt - 1 ) * 255 + STRLEN( it_attach ).
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle.
w_doc_data-sensitivty = 'F'.
CLEAR t_attachment.
REFRESH t_attachment.
t_attachment[] = it_attach[].
Describe the body of the message
CLEAR t_packing_list.
REFRESH t_packing_list.
t_packing_list-transf_bin = space.
t_packing_list-head_start = 1.
t_packing_list-head_num = 0.
t_packing_list-body_start = 1.
DESCRIBE TABLE it_message LINES t_packing_list-body_num.
t_packing_list-doc_type = 'RAW'.
APPEND t_packing_list.
Create attachment notification
t_packing_list-transf_bin = 'X'.
t_packing_list-head_start = 1.
t_packing_list-head_num = 1.
t_packing_list-body_start = 1.
DESCRIBE TABLE t_attachment LINES t_packing_list-body_num.
t_packing_list-doc_type = ld_format.
t_packing_list-obj_descr = ld_attdescription.
t_packing_list-obj_name = ld_attfilename.
t_packing_list-doc_size = t_packing_list-body_num * 255.
APPEND t_packing_list.
Add the recipients email address
CLEAR t_receivers.
REFRESH t_receivers.
t_receivers-receiver = ld_email.
t_receivers-rec_type = 'U'.
t_receivers-com_type = 'INT'.
t_receivers-notif_del = 'X'.
t_receivers-notif_ndel = 'X'.
APPEND t_receivers.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
EXPORTING
document_data = w_doc_data
put_in_outbox = 'X'
sender_address = ld_sender_address
sender_address_type = ld_sender_address_type
commit_work = 'X'
IMPORTING
sent_to_all = w_sent_all
TABLES
packing_list = t_packing_list
contents_bin = t_attachment
contents_txt = it_message
receivers = t_receivers
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
Populate zerror return code
ld_error = sy-subrc.
Populate zreceiver return code
LOOP AT t_receivers.
ld_receiver = t_receivers-retrn_code.
ENDLOOP.
ENDFORM.
Hope this resolves your query.
Reward all the helpful answers.
Regards -
How to save ALV list and send listoutput as email in background process
Can anyone tell me if an ALV list report could be saved as LIST using 'LIST_TO_MEMORY' and then by using 'LIST_FROM_MEMORY' we need to read the list. If so How?
I don't want to use 'Submit....exporting list to memory and return' as then I have to trigger my program twice.
Finally with one program itself i want to get the listoutput and send the list output as an email to the customer in background.
I have gone through the forums and could see many of them facing the same problem, but could not find the solution in the forums.
Waiting for a reply
Santhoshiif you want to send mail with the same data as you display in ALV, you can use the same internal table,which you sent to ALV_LIST_DISPLAY function module.
take the email ids from the user on the selection-screen & use the below code to send mail to them.
call this FORM F_SEND_MAIL before you called the ALV function module.
FORM F_SEND_MAIL .
CLEAR WA_RECLIST.
REFRESH IT_RECLIST.
*-popualate email ids
*--Receipient 1
this receipient can be select-option from the selection screen. or can be hardcoded as below.
WA_RECLIST-RECEIVER = '[email protected]'.
WA_RECLIST-REC_TYPE = C_U.
WA_RECLIST-EXPRESS = C_X.
*--append receiver table
APPEND WA_RECLIST TO IT_RECLIST.
CLEAR : WA_RECLIST.
*--Receipient 2
WA_RECLIST-RECEIVER = '[email protected]'.
WA_RECLIST-REC_TYPE = C_U.
WA_RECLIST-EXPRESS = C_X.
*-append receiver table
APPEND WA_RECLIST TO IT_RECLIST.
CLEAR : WA_RECLIST.
*--populate document attributes
CLEAR: X_DOC_CHNG.
X_DOC_CHNG-OBJ_NAME = 'HEADING'.
CONCATENATE 'Japan BOL details for the delivery#'(003)
V_VBELN
INTO X_DOC_CHNG-OBJ_DESCR SEPARATED BY SPACE.
*-populate body text
CONCATENATE 'Japan BOL details for the Delivery#'(003)
CONCATENATE TEXT-003
V_VBELN
',is attached'
INTO WA_OBJTXT SEPARATED BY SPACE.
APPEND WA_OBJTXT TO IT_OBJTXT.
*---- Append Date and Time into Body of email.
MOVE 'File is generated on'(004) TO V_INFO.
V_TIME = SY-UZEIT.
WRITE : SY-UZEIT TO V_TIME USING EDIT MASK '__:__:__'.
CONCATENATE V_TIME+0(2)
V_TIME+2(2)
V_TIME+4(2)
INTO
V_TIME2 SEPARATED BY ':'.
WRITE : sy-datum MM/DD/YYYY TO lv_date .
CONCATENATE SY-DATUM+4(2)
SY-DATUM+6(2)
SY-DATUM+0(4)
INTO V_DATE.
CONCATENATE V_INFO
V_DATE
'At'
V_TIME2
INTO V_INFO
SEPARATED BY SPACE.
WA_OBJTXT = V_INFO.
APPEND WA_OBJTXT TO IT_OBJTXT.
*-document size
CLEAR : V_TABLE_LINES.
DESCRIBE TABLE IT_OBJTXT LINES V_TABLE_LINES.
READ TABLE IT_OBJTXT INTO WA_OBJTXT INDEX V_TABLE_LINES.
X_DOC_CHNG-DOC_SIZE =
( V_TABLE_LINES - 1 ) * 255 + STRLEN( WA_OBJTXT ).
*-populate packing list for body text
CLEAR IT_OBJPACK-TRANSF_BIN.
WA_OBJPACK-HEAD_START = 1.
WA_OBJPACK-HEAD_NUM = 0.
WA_OBJPACK-BODY_START = 1.
WA_OBJPACK-BODY_NUM = V_TABLE_LINES.
WA_OBJPACK-DOC_TYPE = 'RAW'.
APPEND WA_OBJPACK TO IT_OBJPACK.
CLEAR WA_OBJPACK.
*--for attachment
*--add Internal table lines here, as attachment.
*--IT_FINAL IS THE internal table which you used to display the result as ALV output
loop at IT_FINAL.
CONCATENATE IT_FINAL-FIELD1
IT_FINAL-FIELD2
*--AND SO ON
INTO WA_OBJBIN.
APPEND WA_OBJBIN TO IT_OBJBIN.
CLEAR WA_OBJBIN.
ENDLOOP.
*-get total no.of lines of Object table(attachment)
CLEAR : V_TABLE_LINES.
DESCRIBE TABLE IT_OBJBIN LINES V_TABLE_LINES.
*-populate object header
CONCATENATE 'Delivery#'(005)
V_VBELN
SY-DATUM
V_TIME
INTO
WA_OBJHEAD SEPARATED BY SPACE.
APPEND WA_OBJHEAD TO IT_OBJHEAD.
CLEAR WA_OBJHEAD.
*-packing list for attachment
WA_OBJPACK-TRANSF_BIN = C_X.
WA_OBJPACK-HEAD_START = 1.
WA_OBJPACK-HEAD_NUM = 1.
WA_OBJPACK-BODY_START = 1.
WA_OBJPACK-BODY_NUM = V_TABLE_LINES .
WA_OBJPACK-DOC_TYPE = 'CSV' .
WA_OBJPACK-DOC_TYPE = 'RAW' .
WA_OBJPACK-OBJ_NAME = 'POTR'.
CONCATENATE 'Delivery details for '(005)
CONCATENATE TEXT-005
V_VBELN
SY-DATUM
V_TIME
'.CSV'
INTO
WA_OBJPACK-OBJ_DESCR SEPARATED BY SPACE.
BREAK-POINT.
WA_OBJPACK-DOC_SIZE = V_TABLE_LINES * 255.
APPEND WA_OBJPACK TO IT_OBJPACK.
CLEAR WA_OBJPACK.
*-Sending the document
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
DOCUMENT_DATA = X_DOC_CHNG
PUT_IN_OUTBOX = C_X
COMMIT_WORK = C_X
TABLES
PACKING_LIST = IT_OBJPACK
OBJECT_HEADER = IT_OBJHEAD
CONTENTS_BIN = IT_OBJBIN
CONTENTS_TXT = IT_OBJTXT
RECEIVERS = IT_RECLIST
EXCEPTIONS
TOO_MANY_RECEIVERS = 1
DOCUMENT_NOT_SENT = 2
DOCUMENT_TYPE_NOT_EXIST = 3
OPERATION_NO_AUTHORIZATION = 4
PARAMETER_ERROR = 5
X_ERROR = 6
ENQUEUE_ERROR = 7
OTHERS = 8.
IF SY-SUBRC <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " F_SEND_MAIL
Regards
srikanth
added comments
Message was edited by: Srikanth Kidambi -
How to send program output as mail in HTML format
Hi Friends,
I have a BDc which runs in background and its been Stored in my system and displayed as HTML format.
My requirement is now i want that Same HTML file which i am displaying to be sent as a mail in HTML format itself..Kindly help me on this
Thanks in advance
kishoreHi,
Below sample program might give you idea on sending HTML attachment.
TYPES: BEGIN OF t_sal_ord,
vbeln TYPE vbeln_va,
posnr TYPE posnr_va,
auart TYPE auart,
vkorg TYPE vkorg,
matnr TYPE matnr,
END OF t_sal_ord.
DATA: i_sal_ord TYPE STANDARD TABLE OF t_sal_ord,
i_header TYPE STANDARD TABLE OF w3head,
i_fields TYPE STANDARD TABLE OF w3fields,
i_html TYPE STANDARD TABLE OF w3html,
wa_header TYPE w3head.
DATA: i_fcat TYPE lvc_t_fcat,
wa_fcat TYPE lvc_s_fcat.
DATA: g_send_request TYPE REF TO cl_bcs,
g_document TYPE REF TO cl_document_bcs,
g_recipient TYPE REF TO cl_cam_address_bcs,
g_cx_bcs TYPE REF TO cx_bcs,
g_sent_to_all TYPE os_boolean.
DATA: g_lines TYPE i,
g_size TYPE so_obj_len.
PARAMETERS: p_vkorg TYPE vkorg OBLIGATORY,
p_mailad TYPE ad_smtpadr OBLIGATORY.
START-OF-SELECTION.
SELECT a~vbeln b~posnr a~auart a~vkorg b~matnr
INTO TABLE i_sal_ord
UP TO 20 ROWS
FROM vbak AS a
INNER JOIN vbap AS b
ON a~vbeln = b~vbeln
WHERE a~vkorg = p_vkorg.
wa_fcat-coltext = 'SalesOrd#'.
APPEND wa_fcat TO i_fcat.
wa_fcat-coltext = 'Item#'.
APPEND wa_fcat TO i_fcat.
wa_fcat-coltext = 'OrdType'.
APPEND wa_fcat TO i_fcat.
wa_fcat-coltext = 'Sales.Org'.
APPEND wa_fcat TO i_fcat.
wa_fcat-coltext = 'Material'.
APPEND wa_fcat TO i_fcat.
LOOP AT i_fcat INTO wa_fcat.
wa_header-text = wa_fcat-coltext.
CALL FUNCTION 'WWW_ITAB_TO_HTML_HEADERS'
EXPORTING
field_nr = sy-tabix
text = wa_header-text
size = '2'
fgcolor = 'BLACK'
bgcolor = 'VIOLET'
font = 'CALIBRI'
TABLES
header = i_header.
CALL FUNCTION 'WWW_ITAB_TO_HTML_LAYOUT'
EXPORTING
field_nr = sy-tabix
size = '2'
fgcolor = 'BLACK'
bgcolor = 'WHITE'
font = 'CALIBRI'
TABLES
fields = i_fields.
ENDLOOP.
wa_header-text = 'Sales Order Details'.
wa_header-size = '2'.
wa_header-font = 'CALIBRI'.
CALL FUNCTION 'WWW_ITAB_TO_HTML'
EXPORTING
* TABLE_ATTRIBUTES = 'BORDER=1'
table_header = wa_header
* ALL_FIELDS = 'X'
TABLES
html = i_html
fields = i_fields
row_header = i_header
itable = i_sal_ord.
TRY .
g_send_request = cl_bcs=>create_persistent( ).
g_document = cl_document_bcs=>create_document(
i_type = 'RAW'
* i_text = i_content[] " Body for Mail
i_subject = 'Sales Order Details' ).
DESCRIBE TABLE i_html LINES g_lines.
g_size = g_lines * 2 * 255.
CALL METHOD g_document->add_attachment
EXPORTING
i_attachment_type = 'HTM'
i_attachment_subject = 'Sales Order Details'
i_attachment_size = g_size
i_att_content_text = i_html[].
g_send_request->set_document( g_document ).
g_recipient = cl_cam_address_bcs=>create_internet_address( p_mailad ).
g_send_request->add_recipient(
EXPORTING
i_recipient = g_recipient
i_express = 'X' ).
g_send_request->set_send_immediately( 'X' ).
g_send_request->send(
EXPORTING
i_with_error_screen = 'X'
RECEIVING
result = g_sent_to_all ).
COMMIT WORK.
CATCH cx_bcs INTO g_cx_bcs.
WRITE:/ g_cx_bcs->error_type.
ENDTRY.
Kind Regards
Eswar -
Sending smartform output as mail attachment (PDF)
Hi,
I am trying to send a smartform output in PDF format as a mail attachment. This has to be fired in the save of a Invoice.. configured by the output type.
Here is the code which i have .. and it does not work.
DATA: ls_bil_invoice TYPE lbbil_invoice.
tables: nast.
DATA: i_otf TYPE itcoo OCCURS 0 WITH HEADER LINE,
i_tline TYPE TABLE OF tline WITH HEADER LINE,
i_receivers TYPE TABLE OF somlreci1 WITH HEADER LINE,
i_record LIKE solisti1 OCCURS 0 WITH HEADER LINE,
Objects to send mail.
i_objpack LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE,
i_objtxt LIKE solisti1 OCCURS 0 WITH HEADER LINE,
i_objbin LIKE solisti1 OCCURS 0 WITH HEADER LINE,
i_reclist LIKE somlreci1 OCCURS 0 WITH HEADER LINE,
Work Area declarations
wa_objhead TYPE soli_tab,
w_ctrlop TYPE ssfctrlop,
w_compop TYPE ssfcompop,
w_return TYPE ssfcrescl,
wa_doc_chng typE sodocchgi1,
w_data TYPE sodocchgi1,
wa_buffer TYPE string,"To convert from 132 to 255
Variables declarations
v_form_name TYPE rs38l_fnam,
v_len_in LIKE sood-objlen,
v_len_out LIKE sood-objlen,
v_len_outn TYPE i,
v_lines_txt TYPE i,
v_lines_bin TYPE i.
call function 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
formname = 'ZSDDLB_BIL_INVOICE'
IMPORTING
fm_name = v_form_name
EXCEPTIONS
no_form = 1
no_function_module = 2
others = 3.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
w_ctrlop-getotf = 'X'.
w_ctrlop-no_dialog = 'X'.
w_compop-tdnoprev = 'X'.
CALL FUNCTION v_form_name
EXPORTING
control_parameters = w_ctrlop
output_options = w_compop
user_settings = 'X'
is_bil_invoice = ls_bil_invoice
is_nast = nast
is_repeat = 'X'
IMPORTING
job_output_info = w_return
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
i_otf[] = w_return-otfdata[].
call function 'CONVERT_OTF'
EXPORTING
format = 'PDF'
max_linewidth = 132
IMPORTING
bin_filesize = v_len_in
TABLES
otf = i_otf
lines = i_tline
EXCEPTIONS
err_max_linewidth = 1
err_format = 2
err_conv_not_possible = 3
others = 4.
if sy-subrc EQ 0.
endif.
Convert PDF from 132 to 255.
loop at i_tline.
translate i_tline using '~'.
concatenate wa_buffer i_tline into wa_buffer.
endloop.
translate wa_buffer using '~'.
do.
i_record = wa_buffer.
append i_record.
shift wa_buffer left by 255 places.
if wa_buffer is initial.
exit.
endif.
enddo.
refresh:
i_reclist,
i_objtxt,
i_objbin,
i_objpack.
clear wa_objhead.
Object with PDF.
i_objbin[] = i_record[].
DESCRIBE TABLE i_objbin LINES v_lines_bin.
Object with main text of the mail.
i_objtxt = 'Find attached the output of the smart form.'.
APPEND i_objtxt.
DESCRIBE TABLE i_objtxt LINES v_lines_txt.
Document information.
wa_doc_chng-obj_name = 'Smartform'.
wa_doc_chng-expiry_dat = sy-datum + 10.
wa_doc_chng-obj_descr = 'Smart form output'.
wa_doc_chng-sensitivty = 'F'. "Functional object
wa_doc_chng-doc_size = v_lines_txt * 255.
Pack to main body as RAW.
Obj. to be transported not in binary form
CLEAR i_objpack-transf_bin.
Start line of object header in transport packet Smart Forms
i_objpack-head_start = 1.
Number of lines of an object header in object packet
i_objpack-head_num = 0.
Start line of object contents in an object packet
i_objpack-body_start = 1.
Number of lines of the object contents in an object packet
i_objpack-body_num = v_lines_txt.
Code for document class
i_objpack-doc_type = 'RAW'.
APPEND i_objpack.
Packing as PDF.
i_objpack-transf_bin = 'X'.
i_objpack-head_start = 1.
i_objpack-head_num = 1.
i_objpack-body_start = 1.
i_objpack-body_num = v_lines_bin.
i_objpack-doc_type = 'PDF'.
i_objpack-obj_name = 'Smartform'.
CONCATENATE 'Smartform_output' '.pdf'
INTO i_objpack-obj_descr.
i_objpack-doc_size = v_lines_bin * 255.
APPEND i_objpack.
Document information.
CLEAR i_reclist.
e-mail receivers.
i_reclist-receiver = '[email protected]'.
i_reclist-express = 'X'.
i_reclist-rec_type = 'U'. "Internet address
APPEND i_reclist.
call function 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = wa_doc_chng
put_in_outbox = 'X'
TABLES
packing_list = i_objpack
object_header = wa_objhead
CONTENTS_BIN = i_objbin
contents_txt = i_objtxt
receivers = i_reclist
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
others = 8.
IF sy-subrc EQ 0.
ENDIF.Hi Aviroop,
Compare your part of code with the below given code.
*& Report YSSN_SIMPLE_SMARTFORM *
report zhr_bhaskar_pdf_to_email message-id zmsg.
parameters: p_vbeln type vbak-vbeln default '35'.
data: it_items type table of vbap,
v_fm_name type rs38l_fnam,
v_tot_lines type i,
v_sy_tabix type i,
output_data type ssfcrescl. " To hold Output information
constants:
c_sep type c value '-', " Value -
c_x type c value 'X', " Value X
c_space type c value ' '. " Space
*****MAIL START
include .
data: g_mail_rec_obj type swotobjid,
g_mail_sen_obj type swotobjid,
g_mail_app_obj type swotobjid,
g_cont_par type ssfctrlop,
folder type swc_object,
begin of sofmfol_key,
foldertype like sofm-foltp,
folderyear like sofm-folyr,
foldernumber like sofm-folno,
type like sofm-doctp,
year like sofm-docyr,
number like sofm-docno,
forwarder like soub-usrnam,
end of sofmfol_key,
bor_key like swotobjid-objkey,
g_mail TYPE ppfdmailad VALUE '[email protected]',
g_mail type so_name value '[email protected]',
g_mail TYPE ppfdmailad VALUE '[email protected]' ,
g_mail TYPE ppfdmailad VALUE '[email protected]' ,
g_rectype type so_escape value 'U'. " 'B'.
data: job_output_info type ssfcrescl,
hotfdata like itcoo occurs 1 with header line,
htline like tline occurs 1 with header line,
x_objcont like soli occurs 1 with header line,
ld_packing_list like soxpl occurs 1 with header line,
x_object_hd_change like sood1 occurs 1 with header line,
x_objhead like soli occurs 1 with header line,
x_receivers like soos1 occurs 1 with header line,
format_pdf(10) value 'PDF',
doc_size(12) type c,
hltlines type i,
htabix like sy-tabix,
fle1(2) type p,
fle2(2) type p,
off1 type p,
hfeld(500) type c.
tables: soud.
*****MAIL END
select *
into table it_items
from vbap
where vbeln = p_vbeln.
if it_items[] is initial.
exit.
endif.
perform call_smartform.
*& Form call_smartform
text
--> p1 text
<-- p2 text
form call_smartform .
*DATA: lx_control_parameters TYPE SSFCTRLOP,
lx_OUTPUT_OPTIONS type SSFCOMPOP.
lx_OUTPUT_OPTIONS-TDIMMED = ' '.
lx_OUTPUT_OPTIONS-TDfinal = 'X'.
lx_OUTPUT_OPTIONS-TDDELETE = 'X'.
lx_CONTROL_PARAMETERS-NO_CLOSE = 'X'.
lx_CONTROL_PARAMETERS-NO_OPEN = ' '.
data: x_ssfcompop type ssfcompop,
x_ssfctrlop like ssfctrlop,
x_ssfcrescl type ssfcrescl.
**MAIL
g_cont_par-langu = sy-langu.
g_cont_par-no_dialog = 'X'.
g_cont_par-getotf = 'X'.
g_cont_par-device = 'MAIL'.
Get BOR-Objects for Recipient, Sender und Applikation
perform mail_recipient_object changing g_mail_rec_obj.
perform mail_sender_object changing g_mail_sen_obj.
perform mail_appl_object changing g_mail_app_obj.
**MAIL
*--Internal table is having more than 1 record
if v_tot_lines gt 1.
if v_sy_tabix = 1.
*--For first record of table
x_ssfctrlop-no_open = c_space.
x_ssfctrlop-no_close = c_x.
elseif v_sy_tabix = v_tot_lines.
*--For last record of table
x_ssfctrlop-no_open = c_x.
x_ssfctrlop-no_close = c_space.
else.
x_ssfctrlop-no_open = c_x.
x_ssfctrlop-no_close = c_x.
endif.
endif.
IF r_previ = c_x.
x_ssfctrlop-preview = c_x.
x_ssfctrlop-getotf = c_x.
ENDIF.
call function 'SSF_FUNCTION_MODULE_NAME'
exporting
formname = 'YSSN_SMARTFORM'
VARIANT = ' '
DIRECT_CALL = ' '
importing
fm_name = v_fm_name
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3
if sy-subrc <> 0.
message i000 with 'Smart form module name failure'.
exit.
endif.
CALL FUNCTION '/1BCDWB/SF00000199'
call function v_fm_name
exporting
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
control_parameters = g_cont_par
mail_appl_obj = g_mail_app_obj
mail_recipient = g_mail_rec_obj
mail_sender = g_mail_sen_obj
OUTPUT_OPTIONS = lx_OUTPUT_OPTIONS
USER_SETTINGS = 'X'
t_vbap = it_items
IMPORTING
DOCUMENT_OUTPUT_INFO =
job_output_info = job_output_info
JOB_OUTPUT_OPTIONS =
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5
perform send_pdf_mail.
endform. " call_smartform
*& Form send_pdf_mail
text
--> p1 text
<-- p2 text
form send_pdf_mail .
data ld_binfile type xstring.
pdf_table type rcl_bag_tline,
data: ld_originator like soos1-recextnam.
convert form
loop at job_output_info-otfdata into hotfdata.
append hotfdata.
endloop.
call function 'CONVERT_OTF'
exporting
format = format_pdf
max_linewidth = 132
importing
bin_filesize = doc_size
bin_file = ld_binfile
tables
otf = output_data-otfdata
lines = htline
exceptions
err_max_linewidth = 1
err_format = 2
err_conv_not_possible = 3
others = 4.
*-Itab 134 Zeichen nach 255 Zeichen überführen
describe table htline lines hltlines.
describe field htline length fle1 in character mode.
describe field x_objcont length fle2 in character mode.
loop at htline.
htabix = sy-tabix.
move htline to hfeld+off1.
if htabix = hltlines.
fle1 = strlen( htline ).
endif.
off1 = off1 + fle1.
if off1 ge fle2.
clear x_objcont.
x_objcont = hfeld(fle2).
append x_objcont.
shift hfeld by fle2 places.
off1 = off1 - fle2.
endif.
if htabix = hltlines.
if off1 gt 0.
clear x_objcont.
x_objcont = hfeld(off1).
append x_objcont.
endif.
endif.
endloop.
x_object_hd_change-objnam = 'EMAIL'.
x_object_hd_change-objdes = 'Smart Form'.
x_object_hd_change-objla = sy-langu.
x_object_hd_change-objsns = 'O'.
x_object_hd_change-objlen = doc_size.
x_object_hd_change-file_ext = 'TXT'.
ld_packing_list-transf_bin = 'X'.
ld_packing_list-head_start = 1.
ld_packing_list-head_num = 0.
ld_packing_list-body_start = 1.
describe table x_objcont lines ld_packing_list-body_num.
ld_packing_list-objtp = 'EXT'.
ld_packing_list-objdes = 'Smart Form'.
ld_packing_list-objla = sy-langu.
ld_packing_list-objlen = doc_size.
ld_packing_list-file_ext = 'PDF'.
append ld_packing_list.
x_receivers-recextnam = g_mail.
x_receivers-recesc = 'E'.
x_receivers-sndart = 'INT'.
append x_receivers.
ld_originator = '[email protected]'.
ld_originator = FSABE-USRNAM.
call function 'SO_OBJECT_SEND'
exporting
object_hd_change = x_object_hd_change
object_type = 'RAW'
originator_type = 'B' "Einfügen
originator = ld_originator "Einfügen
tables
objcont = ld_text
receivers = x_receivers
packing_list = ld_packing_list
att_cont = x_objcont
att_head = x_objhead
exceptions
active_user_not_exist = 1
communication_failure = 2
component_not_available = 3
folder_not_exist = 4
folder_no_authorization = 5
forwarder_not_exist = 6
note_not_exist = 7
object_not_exist = 8
object_not_sent = 9
object_no_authorization = 10
object_type_not_exist = 11
operation_no_authorization = 12
owner_not_exist = 13
parameter_error = 14
substitute_not_active = 15
substitute_not_defined = 16
system_failure = 17
too_much_receivers = 18
user_not_exist = 19
x_error = 20
others = 21.
endform. " send_pdf_mail
*& Form mail_sender_object
text
<--P_G_MAIL_SEN_OBJ text
form mail_sender_object changing p_mail_sen_obj.
call function 'CREATE_SENDER_OBJECT_PPF'
exporting
ip_sender = sy-uname
importing
ep_sender_id = p_mail_sen_obj
exceptions
invalid_sender = 1
others = 2.
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
endform. " mail_sender_object
*& Form mail_appl_object
text
<--P_G_MAIL_APP_OBJ text
form mail_appl_object changing p_mail_app_obj.
SELECT * FROM soud WHERE sapnam LIKE sy-uname AND deleted = ' '.
ENDSELECT.
IF sy-subrc NE 0.
call function 'SO_USER_AUTOMATIC_INSERT'
exporting
sapname = sy-uname
exceptions
no_insert = 1
sap_name_exist = 2
x_error = 3
others = 4.
if sy-subrc ne 0.
clear soud.
else.
select * from soud where sapnam like sy-uname and deleted = ' '.
endselect.
endif.
ENDIF.
clear sofmfol_key.
sofmfol_key-type = 'FOL'.
sofmfol_key-year = soud-inbyr.
sofmfol_key-number = soud-inbno.
bor_key = sofmfol_key.
if not bor_key is initial.
swc_create_object folder 'SOFMFOL' bor_key.
if sy-subrc = 0.
swc_object_to_persistent folder p_mail_app_obj.
if sy-subrc ne 0.
clear p_mail_app_obj.
endif.
endif.
else.
clear p_mail_app_obj.
endif.
endform. " mail_appl_object
*& Form mail_recipient_object
text
<--P_G_MAIL_REC_OBJ text
form mail_recipient_object changing p_mail_rec_obj.
call function 'CREATE_RECIPIENT_OBJ_PPF'
exporting
IP_COUNTRY =
IP_FAXNO =
ip_mailaddr = g_mail
ip_type_id = g_rectype " 'U'
importing
ep_recipient_id = p_mail_rec_obj
EP_ADDRESS =
ET_RECIPIENT =
exceptions
invalid_recipient = 1
others = 2.
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
endform. " mail_recipient_object
I hope this code should definitely work and helps you a lot.
Do reward me if it helps you.
Cheers,
Sampath -
Excel problem while sending report output as mail!!
Hi,
I am sending an excel file as attachment in the mail id provided on the selection screen but once we open the attachment the first column value is not displayed in excel , but if we click on the excel cell twice , it does display the content otherwise it's seen as blank ..what may be the reason?
I am using FM SO_DOCUMENT_SEND_API1 for sending mail...
Points for sure .....
Regards
GunjanHello,
DO like this:
CONSTANTS: CON_CRET TYPE X VALUE '0D', "OK for non Unicode
CON_TAB TYPE X VALUE '09'. "OK for non Unicode
*If you have Unicode check active in program attributes thnen you will
*need to declare constants as follows
*class cl_abap_char_utilities definition load.
*constants:
* con_tab type c value cl_abap_char_utilities=>HORIZONTAL_TAB,
* con_cret type c value cl_abap_char_utilities=>CR_LF.
CONCATENATE 'EBELN' 'EBELP' 'AEDAT' 'MATNR'
INTO IT_ATTACH SEPARATED BY CON_TAB.
CONCATENATE CON_CRET IT_ATTACH INTO IT_ATTACH.
APPEND IT_ATTACH.
LOOP AT IT_EKPO INTO WA_CHAREKPO.
CONCATENATE WA_CHAREKPO-EBELN WA_CHAREKPO-EBELP
WA_CHAREKPO-AEDAT WA_CHAREKPO-MATNR
INTO IT_ATTACH SEPARATED BY CON_TAB. " Check here
CONCATENATE CON_CRET IT_ATTACH INTO IT_ATTACH. " Check here
APPEND IT_ATTACH.
ENDLOOP.
VAsanth -
How to send smartform output through mail in PDF Format
Can some one provide me the sample code
Edited by: Revankar Satej on Feb 22, 2008 1:22 PMHi,
try this code,HOPE usefull to u, Reaward points
*& Report ZTEST_SMARTFORM
REPORT ztest_smartform.
DATA: formname TYPE tdsfname,
fm_name TYPE rs38l_fnam,
control_parameters TYPE ssfctrlop,
job_output_info TYPE ssfcrescl,
otf_data TYPE tsfotf,
bin_filesize TYPE i,
otf TYPE TABLE OF itcoo WITH HEADER LINE,
doctab_archive TYPE TABLE OF docs WITH HEADER LINE,
lines TYPE TABLE OF tline WITH HEADER LINE.
INITIALIZATION.
formname = 'UR SMART FORM'.
START-OF-SELECTION.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
formname = formname
VARIANT = ' '
DIRECT_CALL = ' '
IMPORTING
fm_name = fm_name
EXCEPTIONS
no_form = 1
no_function_module = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
control_parameters-no_dialog = 'X'.
control_parameters-preview = ''.
control_parameters-getotf = 'X'.
CALL FUNCTION fm_name
EXPORTING
ARCHIVE_INDEX = ARCHIVE_INDEX
ARCHIVE_INDEX_TAB = ARCHIVE_INDEX_TAB
ARCHIVE_PARAMETERS = ARCHIVE_PARAMETERS
control_parameters = control_parameters
MAIL_APPL_OBJ = MAIL_APPL_OBJ
MAIL_RECIPIENT = MAIL_RECIPIENT
MAIL_SENDER = MAIL_SENDER
OUTPUT_OPTIONS = OUTPUT_OPTIONS
USER_SETTINGS = 'X'
IMPORTING
DOCUMENT_OUTPUT_INFO = DOCUMENT_OUTPUT_INFO
job_output_info = job_output_info
JOB_OUTPUT_OPTIONS = JOB_OUTPUT_OPTIONS
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
otf_data[] = job_output_info-otfdata[].
CALL FUNCTION 'CONVERT_OTF_2_PDF'
EXPORTING
USE_OTF_MC_CMD = 'X'
ARCHIVE_INDEX = ARCHIVE_INDEX
IMPORTING
bin_filesize = bin_filesize
TABLES
otf = otf_data[]
doctab_archive = doctab_archive[]
lines = lines
EXCEPTIONS
ERR_CONV_NOT_POSSIBLE = 1
ERR_OTF_MC_NOENDMARKER = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
DATA: filename TYPE string.
filename = 'c:\test\smart.pdf'.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
bin_filesize = bin_filesize
filename = filename
filetype = 'BIN'
APPEND = ' '
WRITE_FIELD_SEPARATOR = ' '
HEADER = '00'
TRUNC_TRAILING_BLANKS = ' '
WRITE_LF = 'X'
COL_SELECT = ' '
COL_SELECT_MASK = ' '
DAT_MODE = ' '
CONFIRM_OVERWRITE = ' '
NO_AUTH_CHECK = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
WRITE_BOM = ' '
TRUNC_TRAILING_BLANKS_EOL = 'X'
WK1_N_FORMAT = ' '
WK1_N_SIZE = ' '
WK1_T_FORMAT = ' '
WK1_T_SIZE = ' '
IMPORTING
FILELENGTH = FILELENGTH
TABLES
data_tab = lines[]
FIELDNAMES = FIELDNAMES
EXCEPTIONS
file_write_error = 1
no_batch = 2
gui_refuse_filetransfer = 3
invalid_type = 4
no_authority = 5
unknown_error = 6
header_not_allowed = 7
separator_not_allowed = 8
filesize_not_allowed = 9
header_too_long = 10
dp_error_create = 11
dp_error_send = 12
dp_error_write = 13
unknown_dp_error = 14
access_denied = 15
dp_out_of_memory = 16
disk_full = 17
dp_timeout = 18
file_not_found = 19
dataprovider_exception = 20
control_flush_error = 21
OTHERS = 22
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
DATA: document_data LIKE sodocchgi1 ,
contents_txt TYPE TABLE OF solisti1 WITH HEADER LINE,
contents_bin TYPE TABLE OF solisti1 WITH HEADER LINE,
tab_lines TYPE i,
packing_list TYPE TABLE OF sopcklsti1 WITH HEADER LINE,
OBJECT_HEADER type table of SOLISTI1 with header line,
RECEIVERS TYPE TABLE OF SOMLRECI1 WITH HEADER LINE,
l_str(255) ,
v1 TYPE i,
v2 TYPE i,
v3 type i.
CONSTANTS: c_raw TYPE so_obj_tp VALUE 'RAW',
c_pdf TYPE so_obj_tp VALUE 'PDF',
c_255 TYPE i VALUE 255,
c_134 TYPE i VALUE 134,
C_X TYPE C VALUE 'X',
C_U TYPE C VALUE 'U'.
document_data-obj_name = 'EMAIL'.
document_data-obj_descr = 'subject'.
contents_txt = 'THIS IS first line DATA'.
APPEND contents_txt.
CLEAR contents_txt.
contents_txt = 'THIS IS second line DATA'.
APPEND contents_txt.
CLEAR contents_txt.
APPEND contents_txt.
APPEND contents_txt.
DESCRIBE TABLE contents_txt LINES tab_lines.
READ TABLE contents_txt INDEX tab_lines.
document_data-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( contents_txt ).
document_data-doc_size = tab_lines .
CLEAR packing_list-transf_bin.
packing_list-head_start = 1.
packing_list-head_num = 0.
packing_list-body_start = 1.
packing_list-body_num = tab_lines.
packing_list-doc_type = c_raw.
packing_list-doc_size = document_data-doc_size.
APPEND packing_list.
LOOP AT lines.
CLEAR l_str.
l_str+0(2) = lines-tdformat.
l_str+2(132) = lines-tdline.
v2 = v1 + c_134.
IF v2 LE c_255.
contents_bin-line+v1(c_134) = l_str. v1 = v2.
ELSE.
v3 = v2 - c_255.
v2 = c_255 - v1.
IF NOT v2 IS INITIAL.
contents_bin-linev1(v2) = l_str0(v2).
ENDIF.
APPEND contents_bin.
CLEAR contents_bin.
v1 = v3.
v3 = 134 - v1.
IF NOT v1 IS INITIAL.
contents_bin-line0(v1) = l_strv3(v1).
ENDIF.
ENDIF.
ENDLOOP.
APPEND contents_bin.
CLEAR contents_bin.
DESCRIBE TABLE contents_bin LINES tab_lines.
READ TABLE contents_bin INDEX tab_lines.
OBJECT_HEADER = 'objhead'.
APPEND OBJECT_HEADER.
packing_list-transf_bin = c_x.
packing_list-head_start = 1.
packing_list-head_num = 1.
packing_list-body_start = 1.
packing_list-body_num = tab_lines.
packing_list-doc_type = c_pdf.
packing_list-obj_name = 'text1'.
packing_list-obj_descr = 'filename'.
packing_list-doc_size = tab_lines * 255 + STRLEN( contents_bin ).
APPEND packing_list.
RECEIVERS-receiver = 'UR EMAIL ADDRESS IN CAPS'.
RECEIVERS-rec_type = c_u.
APPEND RECEIVERS.
CLEAR RECEIVERS.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
EXPORTING
document_data = document_data
PUT_IN_OUTBOX = 'X'
SENDER_ADDRESS = SY-UNAME
SENDER_ADDRESS_TYPE = 'B'
COMMIT_WORK = 'X'
IMPORTING
SENT_TO_ALL =
NEW_OBJECT_ID = NEW_OBJECT_ID
SENDER_ID = SENDER_ID
TABLES
packing_list = packing_list
OBJECT_HEADER = OBJECT_HEADER
CONTENTS_BIN = CONTENTS_BIN
CONTENTS_TXT = CONTENTS_TXT
CONTENTS_HEX = CONTENTS_HEX
OBJECT_PARA = OBJECT_PARA
OBJECT_PARB = OBJECT_PARB
receivers = receivers
EXCEPTIONS
TOO_MANY_RECEIVERS = 1
DOCUMENT_NOT_SENT = 2
DOCUMENT_TYPE_NOT_EXIST = 3
OPERATION_NO_AUTHORIZATION = 4
PARAMETER_ERROR = 5
X_ERROR = 6
ENQUEUE_ERROR = 7
OTHERS = 8
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Regards
SFT -
Hi frnds,
I want to send alv output via mail.Hi,
you have your data in the internal table. Just use the FM to send the email...here is the sample code for attachment...you need to use the appropriate type for xls.
data: IS_DOCDATA type SODOCCHGI1,
IS_RECEIVERS type SOMLRECI1,
IS_RECEIVERS_COPY type SOMLRECI1,
IT_RECEIVERS type table of SOMLRECI1,
IS_CONTENT type SOLISTI1,
IT_CONTENT type table of SOLISTI1,
*500369789+
l_txt(255) type c,
lt_objpack TYPE TABLE OF sopcklsti1 WITH HEADER LINE,
lt_objhead TYPE TABLE OF solisti1 WITH HEADER LINE,
lt_objtxt TYPE TABLE OF solisti1 WITH HEADER LINE,
l_tab_lines TYPE i,
l_att_type LIKE soodk-objtp.
*500369789+
IS_DOCDATA-OBJ_NAME = 'MAIL'.
IS_DOCDATA-PRIORITY = 5.
IS_DOCDATA-OBJ_LANGU = SY-LANGU.
IS_DOCDATA-NO_CHANGE = 'X'.
IS_DOCDATA-OBJ_DESCR = SY-CPROG.
loop at IT_MESSAGE into IS_MESSAGE.
clear : IS_CONTENT, l_txt. "500369789+
move is_message-line to l_txt. "500369789+
move IS_MESSAGE-LINE to IS_CONTENT-LINE. "500369789-
move l_txt to IS_CONTENT-LINE. "500369789+
append IS_CONTENT to IT_CONTENT.
endloop.
*---select_email_address
select single
EMAILADDR
CCEMAILADDR
into (IS_RECEIVERS-RECEIVER, IS_RECEIVERS_COPY-RECEIVER)
from ZGL_EMAILCTRL
where IDENT = ''
and ZPROGRAM = 'Z_L_SO_CREA'
and ACTIVE = 'X'.
if IS_RECEIVERS-RECEIVER is not initial.
IS_RECEIVERS-REC_TYPE = 'U'.
IS_RECEIVERS_COPY-REC_TYPE = 'U'.
IS_RECEIVERS_COPY-COPY = 'X'.
append IS_RECEIVERS to IT_RECEIVERS.
append IS_RECEIVERS_COPY to IT_RECEIVERS.
*500369789+
lt_objhead-line = 'USA Order Report'.
append lt_objhead.
DESCRIBE TABLE lt_objhead LINES l_tab_lines.
CLEAR lt_objpack-transf_bin.
lt_objpack-doc_size = STRLEN( lt_objhead ).
lt_objpack-head_start = 1.
lt_objpack-head_num = 1.
lt_objpack-body_start = 1.
lt_objpack-body_num = 1.
lt_objpack-doc_type = 'RAW'.
APPEND lt_objpack.
l_att_type = 'RAW'.
DESCRIBE TABLE it_content LINES l_tab_lines.
READ TABLE it_content into is_content INDEX l_tab_lines.
lt_objpack-doc_size = ( l_tab_lines - 1 ) * 255.
lt_objpack-doc_size = lt_objpack-doc_size + STRLEN( is_content ).
lt_objpack-transf_bin = 'X'.
lt_objpack-head_start = 1.
lt_objpack-head_num = 2.
lt_objpack-body_start = 1.
lt_objpack-body_num = l_tab_lines.
lt_objpack-doc_type = l_att_type.
lt_objpack-obj_name = 'ATTACHMENT'.
concatenate 'Usa' SY-DATUM6(2) SY-DATUM4(2) into
lt_objpack-obj_descr. "#EC *
APPEND lt_objpack.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = IS_DOCDATA
commit_work = 'X'
TABLES
packing_list = lt_objpack
object_header = lt_objhead
contents_txt = lt_objhead
contents_bin = it_content
receivers = it_receivers
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
Refer these links:
How To Send ALV Output By Email.
How to send ALV report by Email
ALV: Send ALV output as mail - background processing
Regards,
Shiva Kumar -
Option sends Purchase Order through mail
Dear All,
My client wants Option sends Purchase Order through mail.
Please tell me what the process for above scenario is.
Thanks in advance,
Nagi ReddyHi,
For sending PO via mail, first check if output determintation in properly set in customization settings. Also If you are using customized program for printing, check if code is maintained in program for sending ouput via mails.
If all is maintained in customizing, in PO select output medium as "Mail" and take print. This can also done by using condition records in MN04. Then try sending the output via mail.
Thanks
Alex -
Sedn report output to mail in d2k 10g
Hi
i want to send report output to mail .
i set
DESTYPE = mail
DESNAME = i gave mail id in initial values
I put the rdf in server and ran cucurent request from application but i am not getting the mail
any one help me tell what other steps i have to do
Regardshi,
try this..
GOTO SE80 -> write the Package name :- SBCOMS
in this package you find lot of ways to send mail.
hope this helps
Regards
RItesh J -
How to send ALV report Output through mail in background !
Hi ,
I had an ALV Report. I want to send this report output to patricular email id every day ! Presenty i do this manually. I run the report and send the output to the particular email address. Now i want to schecule the report daily in background and the out put of the report should be mailed to particular email ids in background itself. How can i do this ?
Is there and method or setting through which we can do this ?
RegardsHi Nau,
For this requirement you will have to write another program.
This program will convert the spool requests into PDF document and sends an email to the recipients that you specify.
These are the threads which are already posted in The SDN.
*http://wiki.sdn.sap.com/wiki/display/Snippets/Converts+spool+request+into+PDF+document+and+emails*
*<a class="jive_macro jive_macro_thread" href="" __jive_macro_name="thread" modifiedtitle="true" __default_attr="353650"></a>*
*<a class="jive_macro jive_macro_thread" href="" __jive_macro_name="thread" modifiedtitle="true" __default_attr="902985"></a>*
You need to use the Function module :
-- Sending the document
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
I will provide you with the code to get this functionality.
*& Form SEND_EMAIL
form SEND_EMAIL .
DATA: t_mailpack TYPE sopcklsti1 OCCURS 0 WITH HEADER LINE,
t_mailhead TYPE solisti1 OCCURS 0 WITH HEADER LINE,
t_mailbin TYPE solisti1 OCCURS 0 WITH HEADER LINE,
t_mailtxt TYPE solisti1 OCCURS 0 WITH HEADER LINE,
t_mailrec TYPE somlreci1 OCCURS 0 WITH HEADER LINE.
DATA: wa_maildata TYPE sodocchgi1,
l_filename(50) TYPE c,
l_fldname(30) TYPE c,
l_fldval(100) TYPE c,
l_lines TYPE i,
l_text TYPE text128 .
DATA: w_email_subrc TYPE i.
DATA: w_ship like vbfa-vbeln.
CLEAR: wa_maildata,
t_mailtxt,
t_mailbin,
t_mailpack,
t_mailhead,
t_mailrec.
REFRESH: t_mailtxt,
t_mailbin,
t_mailpack,
t_mailhead,
t_mailrec.
*-- Fill output file
*- Fill header
CLEAR: t_mailbin.
* t_mailbin[] = pdf_tab[].
t_mailbin[] = it_att[]. "Uthaman
*This line is added to get the shipment no in Subject Line
SELECT SINGLE * FROM vbfa WHERE vbelv EQ nast-objky
AND vbtyp_v EQ c_vbtyp_v_j
AND vbtyp_n EQ c_vbtyp_n_8.
w_ship = vbfa-vbeln.
shift w_ship left deleting leading '0'.
*-- File name
if nast-kschl EQ 'ZFPL'.
CLEAR l_filename.
CONCATENATE 'Packing List -'
sy-datum+4(2) sy-datum+6(2) sy-datum(4) '.PDF' INTO l_filename.
*-- Creation of the document to be sent File Name
wa_maildata-obj_name = 'Packing List'.
*-- Mail Subject
CONCATENATE l_filename '-' 'Shipment No -' w_ship INTO wa_maildata-obj_descr SEPARATED BY space.
*-- Mail Contents
t_mailtxt-line = 'Packing List'.
APPEND t_mailtxt.
ENDIF.
if nast-kschl EQ 'ZFBA'.
CLEAR l_filename.
CONCATENATE 'Booking Advice -'
sy-datum+4(2) sy-datum+6(2) sy-datum(4) '.PDF'
INTO l_filename.
*-- Creation of the document to be sent File Name
wa_maildata-obj_name = 'Booking Advice'.
*-- Mail Subject
CONCATENATE l_filename '-' 'Shipment No -' w_ship INTO wa_maildata-obj_descr SEPARATED BY space.
*-- Mail Contents
t_mailtxt-line = 'Packing List'.
APPEND t_mailtxt.
ENDIF.
*-- Prepare Packing List
*-- Write Packing List (Main Subject)
CLEAR: l_lines, t_mailpack.
DESCRIBE TABLE t_mailtxt LINES l_lines.
* READ TABLE t_mailtxt INDEX l_lines.
t_mailpack-doc_size = ( l_lines - 1 ) * 255 + STRLEN( t_mailtxt ).
* CLEAR t_mailpack-transf_bin.
t_mailpack-transf_bin = ' '.
t_mailpack-head_start = 1.
t_mailpack-head_num = 0.
t_mailpack-body_start = 1.
t_mailpack-body_num = l_lines.
t_mailpack-doc_type = 'RAW'.
APPEND t_mailpack.
t_mailhead = l_filename.
APPEND t_mailhead.
*-- Write Packing List (Attachment)
CLEAR: l_lines, t_mailpack.
DESCRIBE TABLE pdf_tab[] LINES l_lines.
* READ TABLE pdf_tab INDEX l_lines.
t_mailpack-doc_size = ( l_lines - 1 ) * 255 + STRLEN( t_mailbin ).
t_mailpack-transf_bin = 'X'.
t_mailpack-head_start = 1.
t_mailpack-head_num = 1.
t_mailpack-body_start = 1.
t_mailpack-body_num = l_lines.
t_mailpack-doc_type = 'PDF'.
t_mailpack-obj_name = l_filename.
t_mailpack-obj_descr = l_filename.
t_mailpack-obj_langu = 'E'.
APPEND t_mailpack.
*-- Set recipients
tables : ztotcemail.
SELECT SINGLE * FROM vbfa WHERE vbelv EQ nast-objky
AND vbtyp_v EQ c_vbtyp_v_j
AND vbtyp_n EQ c_vbtyp_n_8.
CLEAR vttk.
SELECT SINGLE * FROM vttk WHERE tknum EQ vbfa-vbeln.
SELECT SINGLE * FROM ztotcemail WHERE tplst = vttk-tplst
AND lifnr = vttk-tdlnr.
IF SY-SUBRC EQ 0.
t_mailrec-receiver = ztotcemail-smtp_addr. "'Here you will give the email address'.
t_mailrec-rec_type = 'U'.
APPEND t_mailrec.
ENDIF.
**-- Sending the document
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = wa_maildata
put_in_outbox = 'X'
* commit_work = 'X' " N-16
TABLES
packing_list = t_mailpack
object_header = t_mailhead
contents_bin = t_mailbin[]
contents_txt = t_mailtxt[]
receivers = t_mailrec
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
operation_no_authorization = 4
OTHERS = 99.
w_email_subrc = sy-subrc.
IF sy-subrc EQ 0.
MESSAGE s000(zotc) WITH 'Email output sent successfully'.
ELSE.
MESSAGE s000(zotc) WITH 'Can not send email output'.
ENDIF.
endform. " SEND_EMAIL
Hope the above information will be helpful.
Regards,
Kittu -
How to send the ALV report output in mail
Dear all,
I have developed an ALV report.I need to send this output in the mail.Can anyone help me with the sample code of how to do this.Hi Ramya,
Check the links below :
http://wiki.sdn.sap.com/wiki/display/Snippets/Sending+Mail
http://wiki.sdn.sap.com/wiki/display/Snippets/AbapEMAILProgram
http://wiki.sdn.sap.com/wiki/display/ABAP/SendMessagetoExternalemailidandSAPUseridvia+ABAP
They will explain you to send an email.
Regards,
Kittu
Maybe you are looking for
-
hi all, Can any body provide the code to upload purchase order data using bapis in lsmw.urgent pls... thanks. assad
-
Hi, In my BMM, I have two dimension tables(Plan Dim, Stage Dim) and one fact table(Combine fact). Currently I have all my joins to be an inner join, in the source of my fact. (which is producing wrong results). This is what I am trying to accomplish.
-
Is it possible to debug a Job which already executed in the Background.
Hi Friends, My Z program has a bug when run it in Quality System. If I run this program in foreground to debug, its giving TIME OUT dump. If i try to run it in Background and started DEBUG mode using JDBG. Still one of the table fetch gives TIME OUT
-
CL_GOS_MANAGER usage
We used function module SWU_OBJECT_DISPATCH_DIALOG to display IDOC links associated with a Shipment or Delivery. It appears that this function has become obsolete in ERP2005 release. Does anyone know how to use class CL_GOS_MANAGER to achieve the sam
-
Cleanup data guard drc SID .log
Hi, Is it possible to automatically rotate and/or cleanup the data guard log in the bdump destination? Do I manually have to clean/empty/delete or rename the always growing drc<SID>.log file? thanks for any suggestions