ALV send AS EMAIL in pdf ofrmat
hi all
my problem is
i made one alv report ............
now i want to send this in pdf format to particuler email address.......
can any body tell....
it is emergency....
if helpful then rewarded......
Hi
The code below demonstrates how to retrieve a spool request and email it as a PDF document. Please note
for the below program to process a spool request the program must be executed in background otherwise no
spool request will be created. Once you have had a look at this there is an modified version of the program
which works in both background and foreground. Also see transaction SCOT for SAPConnect administration.
*& Report ZSPOOLTOPDF *
*& Converts spool request into PDF document and emails it to *
*& recipicant. *
*& Execution *
*& This program must be run as a background job in-order for the write *
*& commands to create a Spool request rather than be displayed on *
*& screen *
REPORT zspooltopdf.
PARAMETER: p_email1 LIKE somlreci1-receiver
DEFAULT '[email protected]',
p_sender LIKE somlreci1-receiver
DEFAULT '[email protected]',
p_delspl AS CHECKBOX.
*DATA DECLARATION
DATA: gd_recsize TYPE i.
* Spool IDs
TYPES: BEGIN OF t_tbtcp.
INCLUDE STRUCTURE tbtcp.
TYPES: END OF t_tbtcp.
DATA: it_tbtcp TYPE STANDARD TABLE OF t_tbtcp INITIAL SIZE 0,
wa_tbtcp TYPE t_tbtcp.
* Job Runtime Parameters
DATA: gd_eventid LIKE tbtcm-eventid,
gd_eventparm LIKE tbtcm-eventparm,
gd_external_program_active LIKE tbtcm-xpgactive,
gd_jobcount LIKE tbtcm-jobcount,
gd_jobname LIKE tbtcm-jobname,
gd_stepcount LIKE tbtcm-stepcount,
gd_error TYPE sy-subrc,
gd_reciever TYPE sy-subrc.
DATA: w_recsize TYPE i.
DATA: gd_subject LIKE sodocchgi1-obj_descr,
it_mess_bod LIKE solisti1 OCCURS 0 WITH HEADER LINE,
it_mess_att LIKE solisti1 OCCURS 0 WITH HEADER LINE,
gd_sender_type LIKE soextreci1-adr_typ,
gd_attachment_desc TYPE so_obj_nam,
gd_attachment_name TYPE so_obj_des.
* Spool to PDF conversions
DATA: gd_spool_nr LIKE tsp01-rqident,
gd_destination LIKE rlgrap-filename,
gd_bytecount LIKE tst01-dsize,
gd_buffer TYPE string.
* Binary store for PDF
DATA: BEGIN OF it_pdf_output OCCURS 0.
INCLUDE STRUCTURE tline.
DATA: END OF it_pdf_output.
CONSTANTS: c_dev LIKE sy-sysid VALUE 'DEV',
c_no(1) TYPE c VALUE ' ',
c_device(4) TYPE c VALUE 'LOCL'.
*START-OF-SELECTION.
START-OF-SELECTION.
* Write statement to represent report output. Spool request is created
* if write statement is executed in background. This could also be an
* ALV grid which would be converted to PDF without any extra effort
WRITE 'Hello World'.
new-page.
commit work.
new-page print off.
IF sy-batch EQ 'X'.
PERFORM get_job_details.
PERFORM obtain_spool_id.
*** Alternative way could be to submit another program and store spool
*** id into memory, will be stored in sy-spono.
*submit ZSPOOLTOPDF2
* to sap-spool
* spool parameters %_print
* archive parameters %_print
* without spool dynpro
* and return.
* Get spool id from program called above
* IMPORT w_spool_nr FROM MEMORY ID 'SPOOLTOPDF'.
PERFORM convert_spool_to_pdf.
PERFORM process_email.
if p_delspl EQ 'X'.
PERFORM delete_spool.
endif.
IF sy-sysid = c_dev.
wait up to 5 seconds.
SUBMIT rsconn01 WITH mode = 'INT'
WITH output = 'X'
AND RETURN.
ENDIF.
ELSE.
SKIP.
WRITE:/ 'Program must be executed in background in-order for spool',
'request to be created.'.
ENDIF.
* FORM obtain_spool_id *
FORM obtain_spool_id.
CHECK NOT ( gd_jobname IS INITIAL ).
CHECK NOT ( gd_jobcount IS INITIAL ).
SELECT * FROM tbtcp
INTO TABLE it_tbtcp
WHERE jobname = gd_jobname
AND jobcount = gd_jobcount
AND stepcount = gd_stepcount
AND listident <> '0000000000'
ORDER BY jobname
jobcount
stepcount.
READ TABLE it_tbtcp INTO wa_tbtcp INDEX 1.
IF sy-subrc = 0.
message s004(zdd) with gd_spool_nr.
gd_spool_nr = wa_tbtcp-listident.
MESSAGE s004(zdd) WITH gd_spool_nr.
ELSE.
MESSAGE s005(zdd).
ENDIF.
ENDFORM.
* FORM get_job_details *
FORM get_job_details.
* Get current job details
CALL FUNCTION 'GET_JOB_RUNTIME_INFO'
IMPORTING
eventid = gd_eventid
eventparm = gd_eventparm
external_program_active = gd_external_program_active
jobcount = gd_jobcount
jobname = gd_jobname
stepcount = gd_stepcount
EXCEPTIONS
no_runtime_info = 1
OTHERS = 2.
ENDFORM.
* FORM convert_spool_to_pdf *
FORM convert_spool_to_pdf.
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
EXPORTING
src_spoolid = gd_spool_nr
no_dialog = c_no
dst_device = c_device
IMPORTING
pdf_bytecount = gd_bytecount
TABLES
pdf = it_pdf_output
EXCEPTIONS
err_no_abap_spooljob = 1
err_no_spooljob = 2
err_no_permission = 3
err_conv_not_possible = 4
err_bad_destdevice = 5
user_cancelled = 6
err_spoolerror = 7
err_temseerror = 8
err_btcjob_open_failed = 9
err_btcjob_submit_failed = 10
err_btcjob_close_failed = 11
OTHERS = 12.
CHECK sy-subrc = 0.
* Transfer the 132-long strings to 255-long strings
LOOP AT it_pdf_output.
TRANSLATE it_pdf_output USING ' ~'.
CONCATENATE gd_buffer it_pdf_output INTO gd_buffer.
ENDLOOP.
TRANSLATE gd_buffer USING '~ '.
DO.
it_mess_att = gd_buffer.
APPEND it_mess_att.
SHIFT gd_buffer LEFT BY 255 PLACES.
IF gd_buffer IS INITIAL.
EXIT.
ENDIF.
ENDDO.
ENDFORM.
* FORM process_email *
FORM process_email.
DESCRIBE TABLE it_mess_att LINES gd_recsize.
CHECK gd_recsize > 0.
PERFORM send_email USING p_email1.
* perform send_email using p_email2.
ENDFORM.
* FORM send_email *
* --> p_email *
FORM send_email USING p_email.
CHECK NOT ( p_email IS INITIAL ).
REFRESH it_mess_bod.
* Default subject matter
gd_subject = 'Subject'.
gd_attachment_desc = 'Attachname'.
* CONCATENATE 'attach_name' ' ' INTO gd_attachment_name.
it_mess_bod = 'Message Body text, line 1'.
APPEND it_mess_bod.
it_mess_bod = 'Message Body text, line 2...'.
APPEND it_mess_bod.
* If no sender specified - default blank
IF p_sender EQ space.
gd_sender_type = space.
ELSE.
gd_sender_type = 'INT'.
ENDIF.
* Send file by email as .xls speadsheet
PERFORM send_file_as_email_attachment
tables it_mess_bod
it_mess_att
using p_email
'Example .xls documnet attachment'
'PDF'
gd_attachment_name
gd_attachment_desc
p_sender
gd_sender_type
changing gd_error
gd_reciever.
ENDFORM.
* FORM delete_spool *
FORM delete_spool.
DATA: ld_spool_nr TYPE tsp01_sp0r-rqid_char.
ld_spool_nr = gd_spool_nr.
CHECK p_delspl <> c_no.
CALL FUNCTION 'RSPO_R_RDELETE_SPOOLREQ'
EXPORTING
spoolid = ld_spool_nr.
ENDFORM.
*& Form SEND_FILE_AS_EMAIL_ATTACHMENT
* Send email
FORM send_file_as_email_attachment tables it_message
it_attach
using p_email
p_mtitle
p_format
p_filename
p_attdescription
p_sender_address
p_sender_addres_type
changing p_error
p_reciever.
DATA: ld_error TYPE sy-subrc,
ld_reciever TYPE sy-subrc,
ld_mtitle LIKE sodocchgi1-obj_descr,
ld_email LIKE somlreci1-receiver,
ld_format TYPE so_obj_tp ,
ld_attdescription TYPE so_obj_nam ,
ld_attfilename TYPE so_obj_des ,
ld_sender_address LIKE soextreci1-receiver,
ld_sender_address_type LIKE soextreci1-adr_typ,
ld_receiver LIKE sy-subrc.
data: t_packing_list like sopcklsti1 occurs 0 with header line,
t_contents like solisti1 occurs 0 with header line,
t_receivers like somlreci1 occurs 0 with header line,
t_attachment like solisti1 occurs 0 with header line,
t_object_header like solisti1 occurs 0 with header line,
w_cnt type i,
w_sent_all(1) type c,
w_doc_data like sodocchgi1.
ld_email = p_email.
ld_mtitle = p_mtitle.
ld_format = p_format.
ld_attdescription = p_attdescription.
ld_attfilename = p_filename.
ld_sender_address = p_sender_address.
ld_sender_address_type = p_sender_addres_type.
* Fill the document data.
w_doc_data-doc_size = 1.
* Populate the subject/generic message attributes
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle .
w_doc_data-sensitivty = 'F'.
* Fill the document data and get size of attachment
CLEAR w_doc_data.
READ TABLE it_attach INDEX w_cnt.
w_doc_data-doc_size =
( w_cnt - 1 ) * 255 + STRLEN( it_attach ).
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle.
w_doc_data-sensitivty = 'F'.
CLEAR t_attachment.
REFRESH t_attachment.
t_attachment[] = it_attach[].
* Describe the body of the message
CLEAR t_packing_list.
REFRESH t_packing_list.
t_packing_list-transf_bin = space.
t_packing_list-head_start = 1.
t_packing_list-head_num = 0.
t_packing_list-body_start = 1.
DESCRIBE TABLE it_message LINES t_packing_list-body_num.
t_packing_list-doc_type = 'RAW'.
APPEND t_packing_list.
* Create attachment notification
t_packing_list-transf_bin = 'X'.
t_packing_list-head_start = 1.
t_packing_list-head_num = 1.
t_packing_list-body_start = 1.
DESCRIBE TABLE t_attachment LINES t_packing_list-body_num.
t_packing_list-doc_type = ld_format.
t_packing_list-obj_descr = ld_attdescription.
t_packing_list-obj_name = ld_attfilename.
t_packing_list-doc_size = t_packing_list-body_num * 255.
APPEND t_packing_list.
* Add the recipients email address
CLEAR t_receivers.
REFRESH t_receivers.
t_receivers-receiver = ld_email.
t_receivers-rec_type = 'U'.
t_receivers-com_type = 'INT'.
t_receivers-notif_del = 'X'.
t_receivers-notif_ndel = 'X'.
APPEND t_receivers.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
EXPORTING
document_data = w_doc_data
put_in_outbox = 'X'
sender_address = ld_sender_address
sender_address_type = ld_sender_address_type
commit_work = 'X'
IMPORTING
sent_to_all = w_sent_all
TABLES
packing_list = t_packing_list
contents_bin = t_attachment
contents_txt = it_message
receivers = t_receivers
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
* Populate zerror return code
ld_error = sy-subrc.
* Populate zreceiver return code
LOOP AT t_receivers.
ld_receiver = t_receivers-retrn_code.
ENDLOOP.
ENDFORM.
Similar Messages
-
Hi,
I am using CRM ONLINE 2013.
How to automate below process?
1. On Approval Of Quotation, Run Report.
2. Generate PDF.
3. Send an Email With PDF as attachment.
As i have gone through many forums for this topic, but creating a plugin code for generating Report PDF is not possible in CRM ONLINE.
So, What is the alternate way to do this..?
Thanks.This is my entire code mentioned below:-
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<title></title>
<script type="text/javascript" src="https://ajax.googleapis.com/ajax/libs/jquery/1.4.1/jquery.min.js"></script>
<script type="text/javascript">
if (typeof (SDK) == "undefined")
{ SDK = { __namespace: true }; }
SDK.JScriptRESTDataOperations = {
_context: function () {
if (typeof GetGlobalContext != "undefined")
{ return GetGlobalContext(); }
else {
if (typeof Xrm != "undefined") {
return Xrm.Page.context;
else { return new Error("Context is not available."); }
_getServerUrl: function () {
var serverUrl = this._context().getServerUrl()
if (serverUrl.match(/\/$/)) {
serverUrl = serverUrl.substring(0, serverUrl.length - 1);
return serverUrl;
_ODataPath: function () {
return this._getServerUrl() + "/XRMServices/2011/OrganizationData.svc/";
_errorHandler: function (req) {
return new Error("Error : " +
req.status + ": " +
req.statusText + ": " +
JSON.parse(req.responseText).error.message.value);
_dateReviver: function (key, value) {
var a;
if (typeof value === 'string') {
a = /Date\(([-+]?\d+)\)/.exec(value);
if (a) {
return new Date(parseInt(value.replace("/Date(", "").replace(")/", ""), 10));
return value;
Create: function (object, type, successCallback, errorCallback) {
var req = new XMLHttpRequest();
req.open("POST", this._ODataPath() + type + "Set", true);
req.setRequestHeader("Accept", "application/json");
req.setRequestHeader("Content-Type", "application/json; charset=utf-8");
req.onreadystatechange = function () {
if (this.readyState == 4 /* complete */) {
if (this.status == 201) {
successCallback(JSON.parse(this.responseText, SDK.JScriptRESTDataOperations._dateReviver).d);
else {
errorCallback(SDK.JScriptRESTDataOperations._errorHandler(this));
req.send(JSON.stringify(object));
Retrieve: function (id, type, successCallback, errorCallback) {
var req = new XMLHttpRequest();
req.open("GET", this._ODataPath() + type + "Set(guid'" + id + "')", true);
req.setRequestHeader("Accept", "application/json");
req.setRequestHeader("Content-Type", "application/json; charset=utf-8");
req.onreadystatechange = function () {
if (this.readyState == 4 /* complete */) {
if (this.status == 200) {
successCallback(JSON.parse(this.responseText, SDK.JScriptRESTDataOperations._dateReviver).d);
else {
errorCallback(SDK.JScriptRESTDataOperations._errorHandler(this));
req.send();
Update: function (id, object, type, successCallback, errorCallback) {
var req = new XMLHttpRequest();
req.open("POST", this._ODataPath() + type + "Set(guid'" + id + "')", true);
req.setRequestHeader("Accept", "application/json");
req.setRequestHeader("Content-Type", "application/json; charset=utf-8");
req.setRequestHeader("X-HTTP-Method", "MERGE");
req.onreadystatechange = function () {
if (this.readyState == 4 /* complete */) {
if (this.status == 204 || this.status == 1223) {
successCallback();
else {
errorCallback(SDK.JScriptRESTDataOperations._errorHandler(this));
req.send(JSON.stringify(object));
Delete: function (id, type, successCallback, errorCallback) {
var req = new XMLHttpRequest();
req.open("POST", this._ODataPath() + type + "Set(guid'" + id + "')", true);
req.setRequestHeader("Accept", "application/json");
req.setRequestHeader("Content-Type", "application/json; charset=utf-8");
req.setRequestHeader("X-HTTP-Method", "DELETE");
req.onreadystatechange = function () {
if (this.readyState == 4 /* complete */) {
if (this.status == 204 || this.status == 1223) {
successCallback();
else {
errorCallback(SDK.JScriptRESTDataOperations._errorHandler(this));
req.send();
RetrieveMultiple: function (type, filter, successCallback, errorCallback) {
if (filter != null) {
filter = "?" + filter;
else { filter = ""; }
var req = new XMLHttpRequest();
req.open("GET", this._ODataPath() + type + "Set" + filter, true);
req.setRequestHeader("Accept", "application/json");
req.setRequestHeader("Content-Type", "application/json; charset=utf-8");
req.onreadystatechange = function () {
if (this.readyState == 4 /* complete */) {
if (this.status == 200) {
successCallback(JSON.parse(this.responseText, SDK.JScriptRESTDataOperations._dateReviver).d.results);
else {
errorCallback(SDK.JScriptRESTDataOperations._errorHandler(this));
req.send();
__namespace: true
</script>
<script type="text/javascript">
//Create Email and link it with Order as Regarding field
var Xrm;
var email = new Object();
var ownerID = "";
var CustomerId = "";
if (window.opener) { Xrm = window.opener.Xrm; }
else if (window.parent) { Xrm = window.parent.Xrm; }
//Get ownerid who send email of quotation to customer
function GetOwnerID() {
var owner = Xrm.Page.getAttribute("ownerid").getValue();
ownerID = owner[0].id;
var ownerName = owner[0].name;
var entityType = owner[0].entityType;
GetToEmailGUID();
//Get customerid who receive email of quotation from owner
function GetToEmailGUID() {
var Customer = Xrm.Page.getAttribute('customerid').getValue();
CustomerId = Customer[0].id;
var CustomerName = Customer[0].name;
var entityType = Customer[0].entityType;
//if CustomerId is type of "Account" then get Primary Contact id of that account
if (entityType == "account") {
var contact = Xrm.Page.getAttribute("customerid").getValue();
if (contact === null) return;
var serverUrl = Xrm.Page.context.getClientUrl();
var oDataSelect = serverUrl + "/XRMServices/2011/OrganizationData.svc/AccountSet(guid'" + contact[0].id + "')?$select=PrimaryContactId";
var req = new XMLHttpRequest();
req.open("GET", oDataSelect, false);
req.setRequestHeader("Accept", "application/json");
req.setRequestHeader("Content-Type", "application/json;charset=utf-8");
req.onreadystatechange = function () {
if (req.readyState === 4) {
if (req.status === 200) {
var retrieved = JSON.parse(req.responseText).d;
CustomerId = retrieved.PrimaryContactId.Id;
else {
alert(this.statusText);
req.send();
function CreateEmail() {
GetOwnerID();
email.Subject = "Email with Report Attachment";
//Set The current order as the Regarding object
email.RegardingObjectId = {
Id: Xrm.Page.data.entity.getId(), //Get the current entity Id , here OrderId
LogicalName: Xrm.Page.data.entity.getEntityName()//Get the current entity name, here it will be “salesOrder”
//Create Email Activity
SDK.JScriptRESTDataOperations.Create(email, "Email", EmailCallBack, function (error) { alert(error.message); });
// Email Call Back function
function EmailCallBack(result) {
email = result; // Set the email to result to use it later in email attachment for retrieving activity Id
var activityPartyFrom = new Object();
// Set the From party of the ActivityParty to relate an entity with Email From field
activityPartyFrom.PartyId = {
Id: CustomerId, //"79EBDD26-FDBE-E311-8986-D89D6765B238", // id of entity you want to associate this activity with.
LogicalName: "contact"
// Set the "activity" of the ActivityParty
activityPartyFrom.ActivityId = {
Id: result.ActivityId,
LogicalName: "email"
// Now set the participation type that describes the role of the party on the activity).
activityPartyFrom.ParticipationTypeMask = { Value: 2 }; // 2 means ToRecipients
// Create the from ActivityParty for the email
SDK.JScriptRESTDataOperations.Create(activityPartyFrom, "ActivityParty", ActivityPartyFromCallBack, function (error) { alert(error.message); });
var activityPartyTo = new Object();
// Set the From party of the ActivityParty to relate an entity with Email From field
activityPartyTo.PartyId = {
Id: ownerID, //"79EBDD26-FDBE-E311-8986-D89D6765B238", // id of entity you want to associate this activity with.
LogicalName: "systemuser"
// Set the "activity" of the ActivityParty
activityPartyTo.ActivityId = {
Id: result.ActivityId,
LogicalName: "email"
// Now set the participation type that describes the role of the party on the activity).
activityPartyTo.ParticipationTypeMask = { Value: 1 }; // 1 means Sender
// Create the from ActivityParty
SDK.JScriptRESTDataOperations.Create(activityPartyTo, "ActivityParty", ActivityPartyToCallBack, function (error) { alert(error.message); });
//ActivityParty From Callback
function ActivityPartyFromCallBack(result) {
//ActivityParty To Callback
function ActivityPartyToCallBack(result) {
GetReportId('ABM_Infotech_SalesQuote');
//Create attachment for the created email
function CreateEmailAttachment() {
//get reporting session and use the params to convert a report in PDF
var params = getReportingSession();
//Email attachment parameters
var activitymimeattachment = Object();
activitymimeattachment.ObjectId = Object();
activitymimeattachment.ObjectId.LogicalName = "email";
activitymimeattachment.ObjectId.Id = email.ActivityId;
activitymimeattachment.ObjectTypeCode = "email",
activitymimeattachment.Subject = "File Attachment";
activitymimeattachment.Body = encodePdf(params);
activitymimeattachment.FileName = "Report1.pdf";
activitymimeattachment.MimeType = "application/pdf";
//Attachment call
SDK.JScriptRESTDataOperations.Create(activitymimeattachment, "ActivityMimeAttachment", ActivityMimeAttachmentCallBack, function (error) { alert(error.message); });
//ActivityMimeAttachment CallBack function
function ActivityMimeAttachmentCallBack(result) {
var features = "location=no,menubar=no,status=no,toolbar=no,resizable=yes";
var width = "800px";
var height = "600px";
window.open(Xrm.Page.context.getServerUrl() + "main.aspx?etc=" + 4202 + "&pagetype=entityrecord&id=" + email.ActivityId, "_blank", features);
// To open window which works in outlook and IE both
//openStdWin(Xrm.Page.context.getServerUrl() + "main.aspx?etc=" + 4202 + "&pagetype=entityrecord&id=" + email.ActivityId, "_blank", width,
height, features);
//This method will get the reportId based on a report name that will be used in getReportingSession() function
function GetReportId(reportName) {
var oDataSetName = "ReportSet";
var columns = "ReportId";
var filter = "Name eq '" + reportName + "'";
retrieveMultiple(oDataSetName, columns, filter, onSuccess);
function retrieveMultiple(odataSetName, select, filter, successCallback) {
var serverUrl = Xrm.Page.context.getServerUrl();
var ODATA_ENDPOINT = "/XRMServices/2011/OrganizationData.svc";
var odataUri = serverUrl + ODATA_ENDPOINT + "/" + odataSetName + "?";
if (select) {
odataUri += "$select=" + select + "&";
if (filter) {
odataUri += "$filter=" + filter;
$.ajax({
type: "GET",
contentType: "application/json; charset=utf-8",
datatype: "json",
url: odataUri,
beforeSend: function (XMLHttpRequest) {
XMLHttpRequest.setRequestHeader("Accept", "application/json");
success: function (data) {
if (successCallback) {
if (data && data.d && data.d.results) {
successCallback(data.d.results);
else if (data && data.d) {
successCallback(data.d);
else {
successCallback(data);
error: function (XmlHttpRequest, errorThrown) {
if (XmlHttpRequest && XmlHttpRequest.responseText) {
alert("Error while retrieval ; Error – " + XmlHttpRequest.responseText);
function onSuccess(data) {
reportId = data[0].ReportId.replace('{', ").replace('}', ");
CreateEmailAttachment(); // Create Email Attachment
//Gets the report contents
function getReportingSession() {
var pth = Xrm.Page.context.getServerUrl() + "/CRMReports/rsviewer/reportviewer.aspx";
var retrieveEntityReq = new XMLHttpRequest();
var Id = Xrm.Page.data.entity.getId();
var quotationGUID = Id.replace('{', ""); //set this to selected quotation GUID
quotationGUID = quotationGUID.replace('}', "");
var reportName = "ABM_Infotech_SalesQuote"; //set this to the report you are trying to download
var reportID = "751089AA-74B8-E211-B52F-D8D3855B253B"; //set this to the guid of the report you are trying to download
var rptPathString = ""; //set this to the CRMF_Filtered parameter
var strParameterXML = "<fetch version='1.0' output-format='xml-platform' mapping='logical' distinct='false'><entity name='quote'><all-attributes /><filter type='and'><condition
attribute='quoteid' operator='eq' uitype='quote' value='" + quotationGUID + "' /> </filter></entity></fetch>";
retrieveEntityReq.open("POST", pth, false);
retrieveEntityReq.setRequestHeader("Accept", "*/*");
retrieveEntityReq.setRequestHeader("Content-Type", "application/x-www-form-urlencoded");
rptPathString = "id=%7B" + reportID + "%7D&uniquename=" + Xrm.Page.context.getOrgUniqueName() + "&iscustomreport=true&reportnameonsrs=&reportName="
+
reportName + "&isScheduledReport=false&p:ABMFilteredQuote=" + strParameterXML;
//remove the part starting from &p:salesorderid if your report has no parameters
retrieveEntityReq.send(rptPathString);
var x = retrieveEntityReq.responseText.indexOf("ReportSession=");
var ret = new Array();
ret[0] = retrieveEntityReq.responseText.substr(x + 14, retrieveEntityReq.responseText.indexOf("&", x) - x - 14); //the session id
x = retrieveEntityReq.responseText.indexOf("ControlID=");
ret[1] = retrieveEntityReq.responseText.substr(x + 10, retrieveEntityReq.responseText.indexOf("&", x) - x - 10); //the control id
return ret;
var bdy = new Array();
var bdyLen = 0;
function concat2Bdy(x) {
bdy[bdyLen] = x;
bdyLen++;
function encodePdf(params) {
bdy = new Array();
bdyLen = 0;
var retrieveEntityReq = new XMLHttpRequest();
var pth = Xrm.Page.context.getServerUrl() + "/Reserved.ReportViewerWebControl.axd?ReportSession=" + params[0] +
"&Culture=1033&CultureOverrides=True&UICulture=1033&UICultureOverrides=True&ReportStack=1&ControlID=" + params[1] +
"&OpType=Export&FileName=Public&ContentDisposition=OnlyHtmlInline&Format=PDF";
retrieveEntityReq.open("GET", pth, false);
retrieveEntityReq.setRequestHeader("Accept", "*/*");
retrieveEntityReq.send();
BinaryToArray(retrieveEntityReq.responseBody);
return encode64(bdy);
var StringMaker = function () {
this.parts = [];
this.length = 0;
this.append = function (s) {
this.parts.push(s);
this.length += s.length;
this.prepend = function (s) {
this.parts.unshift(s);
this.length += s.length;
this.toString = function () {
return this.parts.join('');
var keyStr = "ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789+/=";
function encode64(input) {
var output = new StringMaker();
var chr1, chr2, chr3;
var enc1, enc2, enc3, enc4;
var i = 0;
while (i < input.length) {
chr1 = input[i++];
chr2 = input[i++];
chr3 = input[i++];
enc1 = chr1 >> 2;
enc2 = ((chr1 & 3) << 4) | (chr2 >> 4);
enc3 = ((chr2 & 15) << 2) | (chr3 >> 6);
enc4 = chr3 & 63;
if (isNaN(chr2)) {
enc3 = enc4 = 64;
} else if (isNaN(chr3)) {
enc4 = 64;
output.append(keyStr.charAt(enc1) + keyStr.charAt(enc2) + keyStr.charAt(enc3) + keyStr.charAt(enc4));
return output.toString();
</script>
<script type="text/vbscript">
Function BinaryToArray(Binary)
Dim i
ReDim byteArray(LenB(Binary))
For i = 1 To LenB(Binary)
byteArray(i-1) = AscB(MidB(Binary, i, 1))
concat2Bdy(AscB(MidB(Binary, i, 1)))
Next
BinaryToArray = byteArray
End Function
</script>
</head>
<body>
<input type="button" onclick="CreateEmail();" value="Attach Report" />
</body>
</html> -
Send Invoice email with pdf attachement through DI?
Hi all,
is it possible to send an Invoice email with pdf attachement through DI as it can be done through UI?
Best Regards,
VangelisHi Vangelis,
I Don't think that the DI API has that functionality (but I am not sure).
However with .Net's System.Net.Mail it should be quite easy to build.
Good luck,
Johan -
Sending an email with pdf attachment in Ecc6
we were in 4.6 c and recentely upgraded to ECC6. we have a program which we are sending email with pdf attachments. now it is breaking, we are able to display the pdf in the screen, but once it became the attachment , it is not going.
we are running the program in forground and not reading the spool and sending it. any ideahttp://www.sap-img.com/abap/sending-email-with-attachment.htm
Sending mail to an external maild with PDF attachment.
Creating a PDF attachment and send it via Email
Sending E-Mail from ABAP - Version 610 and Higher - BCS Interface
How to send a ttachment with email.
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/snippets/abap-Sendthespooldatatoanemail+address.
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/snippets/convertSpoolrequesttoPDFandsendase-mail
Friend just have a look in the forum itself, there are many posts for ur query, you definetly get exact solution no need to wait for answers/solutions.
All the best -
hi all
can any body tell me how can i send the alv report in pdf format to particuler email?
Message was edited by:
patel pareshHi
The code below demonstrates how to retrieve a spool request and email it as a PDF document. Please note
for the below program to process a spool request the program must be executed in background otherwise no
spool request will be created. Once you have had a look at this there is an modified version of the program
which works in both background and foreground. Also see transaction SCOT for SAPConnect administration.
*& Report ZSPOOLTOPDF *
*& Converts spool request into PDF document and emails it to *
*& recipicant. *
*& Execution *
*& This program must be run as a background job in-order for the write *
*& commands to create a Spool request rather than be displayed on *
*& screen *
REPORT zspooltopdf.
PARAMETER: p_email1 LIKE somlreci1-receiver
DEFAULT '[email protected]',
p_sender LIKE somlreci1-receiver
DEFAULT '[email protected]',
p_delspl AS CHECKBOX.
*DATA DECLARATION
DATA: gd_recsize TYPE i.
* Spool IDs
TYPES: BEGIN OF t_tbtcp.
INCLUDE STRUCTURE tbtcp.
TYPES: END OF t_tbtcp.
DATA: it_tbtcp TYPE STANDARD TABLE OF t_tbtcp INITIAL SIZE 0,
wa_tbtcp TYPE t_tbtcp.
* Job Runtime Parameters
DATA: gd_eventid LIKE tbtcm-eventid,
gd_eventparm LIKE tbtcm-eventparm,
gd_external_program_active LIKE tbtcm-xpgactive,
gd_jobcount LIKE tbtcm-jobcount,
gd_jobname LIKE tbtcm-jobname,
gd_stepcount LIKE tbtcm-stepcount,
gd_error TYPE sy-subrc,
gd_reciever TYPE sy-subrc.
DATA: w_recsize TYPE i.
DATA: gd_subject LIKE sodocchgi1-obj_descr,
it_mess_bod LIKE solisti1 OCCURS 0 WITH HEADER LINE,
it_mess_att LIKE solisti1 OCCURS 0 WITH HEADER LINE,
gd_sender_type LIKE soextreci1-adr_typ,
gd_attachment_desc TYPE so_obj_nam,
gd_attachment_name TYPE so_obj_des.
* Spool to PDF conversions
DATA: gd_spool_nr LIKE tsp01-rqident,
gd_destination LIKE rlgrap-filename,
gd_bytecount LIKE tst01-dsize,
gd_buffer TYPE string.
* Binary store for PDF
DATA: BEGIN OF it_pdf_output OCCURS 0.
INCLUDE STRUCTURE tline.
DATA: END OF it_pdf_output.
CONSTANTS: c_dev LIKE sy-sysid VALUE 'DEV',
c_no(1) TYPE c VALUE ' ',
c_device(4) TYPE c VALUE 'LOCL'.
*START-OF-SELECTION.
START-OF-SELECTION.
* Write statement to represent report output. Spool request is created
* if write statement is executed in background. This could also be an
* ALV grid which would be converted to PDF without any extra effort
WRITE 'Hello World'.
new-page.
commit work.
new-page print off.
IF sy-batch EQ 'X'.
PERFORM get_job_details.
PERFORM obtain_spool_id.
*** Alternative way could be to submit another program and store spool
*** id into memory, will be stored in sy-spono.
*submit ZSPOOLTOPDF2
* to sap-spool
* spool parameters %_print
* archive parameters %_print
* without spool dynpro
* and return.
* Get spool id from program called above
* IMPORT w_spool_nr FROM MEMORY ID 'SPOOLTOPDF'.
PERFORM convert_spool_to_pdf.
PERFORM process_email.
if p_delspl EQ 'X'.
PERFORM delete_spool.
endif.
IF sy-sysid = c_dev.
wait up to 5 seconds.
SUBMIT rsconn01 WITH mode = 'INT'
WITH output = 'X'
AND RETURN.
ENDIF.
ELSE.
SKIP.
WRITE:/ 'Program must be executed in background in-order for spool',
'request to be created.'.
ENDIF.
* FORM obtain_spool_id *
FORM obtain_spool_id.
CHECK NOT ( gd_jobname IS INITIAL ).
CHECK NOT ( gd_jobcount IS INITIAL ).
SELECT * FROM tbtcp
INTO TABLE it_tbtcp
WHERE jobname = gd_jobname
AND jobcount = gd_jobcount
AND stepcount = gd_stepcount
AND listident <> '0000000000'
ORDER BY jobname
jobcount
stepcount.
READ TABLE it_tbtcp INTO wa_tbtcp INDEX 1.
IF sy-subrc = 0.
message s004(zdd) with gd_spool_nr.
gd_spool_nr = wa_tbtcp-listident.
MESSAGE s004(zdd) WITH gd_spool_nr.
ELSE.
MESSAGE s005(zdd).
ENDIF.
ENDFORM.
* FORM get_job_details *
FORM get_job_details.
* Get current job details
CALL FUNCTION 'GET_JOB_RUNTIME_INFO'
IMPORTING
eventid = gd_eventid
eventparm = gd_eventparm
external_program_active = gd_external_program_active
jobcount = gd_jobcount
jobname = gd_jobname
stepcount = gd_stepcount
EXCEPTIONS
no_runtime_info = 1
OTHERS = 2.
ENDFORM.
* FORM convert_spool_to_pdf *
FORM convert_spool_to_pdf.
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
EXPORTING
src_spoolid = gd_spool_nr
no_dialog = c_no
dst_device = c_device
IMPORTING
pdf_bytecount = gd_bytecount
TABLES
pdf = it_pdf_output
EXCEPTIONS
err_no_abap_spooljob = 1
err_no_spooljob = 2
err_no_permission = 3
err_conv_not_possible = 4
err_bad_destdevice = 5
user_cancelled = 6
err_spoolerror = 7
err_temseerror = 8
err_btcjob_open_failed = 9
err_btcjob_submit_failed = 10
err_btcjob_close_failed = 11
OTHERS = 12.
CHECK sy-subrc = 0.
* Transfer the 132-long strings to 255-long strings
LOOP AT it_pdf_output.
TRANSLATE it_pdf_output USING ' ~'.
CONCATENATE gd_buffer it_pdf_output INTO gd_buffer.
ENDLOOP.
TRANSLATE gd_buffer USING '~ '.
DO.
it_mess_att = gd_buffer.
APPEND it_mess_att.
SHIFT gd_buffer LEFT BY 255 PLACES.
IF gd_buffer IS INITIAL.
EXIT.
ENDIF.
ENDDO.
ENDFORM.
* FORM process_email *
FORM process_email.
DESCRIBE TABLE it_mess_att LINES gd_recsize.
CHECK gd_recsize > 0.
PERFORM send_email USING p_email1.
* perform send_email using p_email2.
ENDFORM.
* FORM send_email *
* --> p_email *
FORM send_email USING p_email.
CHECK NOT ( p_email IS INITIAL ).
REFRESH it_mess_bod.
* Default subject matter
gd_subject = 'Subject'.
gd_attachment_desc = 'Attachname'.
* CONCATENATE 'attach_name' ' ' INTO gd_attachment_name.
it_mess_bod = 'Message Body text, line 1'.
APPEND it_mess_bod.
it_mess_bod = 'Message Body text, line 2...'.
APPEND it_mess_bod.
* If no sender specified - default blank
IF p_sender EQ space.
gd_sender_type = space.
ELSE.
gd_sender_type = 'INT'.
ENDIF.
* Send file by email as .xls speadsheet
PERFORM send_file_as_email_attachment
tables it_mess_bod
it_mess_att
using p_email
'Example .xls documnet attachment'
'PDF'
gd_attachment_name
gd_attachment_desc
p_sender
gd_sender_type
changing gd_error
gd_reciever.
ENDFORM.
* FORM delete_spool *
FORM delete_spool.
DATA: ld_spool_nr TYPE tsp01_sp0r-rqid_char.
ld_spool_nr = gd_spool_nr.
CHECK p_delspl <> c_no.
CALL FUNCTION 'RSPO_R_RDELETE_SPOOLREQ'
EXPORTING
spoolid = ld_spool_nr.
ENDFORM.
*& Form SEND_FILE_AS_EMAIL_ATTACHMENT
* Send email
FORM send_file_as_email_attachment tables it_message
it_attach
using p_email
p_mtitle
p_format
p_filename
p_attdescription
p_sender_address
p_sender_addres_type
changing p_error
p_reciever.
DATA: ld_error TYPE sy-subrc,
ld_reciever TYPE sy-subrc,
ld_mtitle LIKE sodocchgi1-obj_descr,
ld_email LIKE somlreci1-receiver,
ld_format TYPE so_obj_tp ,
ld_attdescription TYPE so_obj_nam ,
ld_attfilename TYPE so_obj_des ,
ld_sender_address LIKE soextreci1-receiver,
ld_sender_address_type LIKE soextreci1-adr_typ,
ld_receiver LIKE sy-subrc.
data: t_packing_list like sopcklsti1 occurs 0 with header line,
t_contents like solisti1 occurs 0 with header line,
t_receivers like somlreci1 occurs 0 with header line,
t_attachment like solisti1 occurs 0 with header line,
t_object_header like solisti1 occurs 0 with header line,
w_cnt type i,
w_sent_all(1) type c,
w_doc_data like sodocchgi1.
ld_email = p_email.
ld_mtitle = p_mtitle.
ld_format = p_format.
ld_attdescription = p_attdescription.
ld_attfilename = p_filename.
ld_sender_address = p_sender_address.
ld_sender_address_type = p_sender_addres_type.
* Fill the document data.
w_doc_data-doc_size = 1.
* Populate the subject/generic message attributes
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle .
w_doc_data-sensitivty = 'F'.
* Fill the document data and get size of attachment
CLEAR w_doc_data.
READ TABLE it_attach INDEX w_cnt.
w_doc_data-doc_size =
( w_cnt - 1 ) * 255 + STRLEN( it_attach ).
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle.
w_doc_data-sensitivty = 'F'.
CLEAR t_attachment.
REFRESH t_attachment.
t_attachment[] = it_attach[].
* Describe the body of the message
CLEAR t_packing_list.
REFRESH t_packing_list.
t_packing_list-transf_bin = space.
t_packing_list-head_start = 1.
t_packing_list-head_num = 0.
t_packing_list-body_start = 1.
DESCRIBE TABLE it_message LINES t_packing_list-body_num.
t_packing_list-doc_type = 'RAW'.
APPEND t_packing_list.
* Create attachment notification
t_packing_list-transf_bin = 'X'.
t_packing_list-head_start = 1.
t_packing_list-head_num = 1.
t_packing_list-body_start = 1.
DESCRIBE TABLE t_attachment LINES t_packing_list-body_num.
t_packing_list-doc_type = ld_format.
t_packing_list-obj_descr = ld_attdescription.
t_packing_list-obj_name = ld_attfilename.
t_packing_list-doc_size = t_packing_list-body_num * 255.
APPEND t_packing_list.
* Add the recipients email address
CLEAR t_receivers.
REFRESH t_receivers.
t_receivers-receiver = ld_email.
t_receivers-rec_type = 'U'.
t_receivers-com_type = 'INT'.
t_receivers-notif_del = 'X'.
t_receivers-notif_ndel = 'X'.
APPEND t_receivers.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
EXPORTING
document_data = w_doc_data
put_in_outbox = 'X'
sender_address = ld_sender_address
sender_address_type = ld_sender_address_type
commit_work = 'X'
IMPORTING
sent_to_all = w_sent_all
TABLES
packing_list = t_packing_list
contents_bin = t_attachment
contents_txt = it_message
receivers = t_receivers
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
* Populate zerror return code
ld_error = sy-subrc.
* Populate zreceiver return code
LOOP AT t_receivers.
ld_receiver = t_receivers-retrn_code.
ENDLOOP.
ENDFORM. -
Error while sending by email a PDF from SMARTFORM
Hi all.
Wer'e upgrading to EP4 and I can send smartform PDF by email but get an error message while trying to open it.
*FORM convert_otf_2_pdf.
call function 'CONVERT_OTF_2_PDF'
importing
bin_filesize = lv_len_in
tables
otf = gs_return-otfdata[]
doctab_archive = it_docs[]
lines = lt_tline[]
exceptions
err_conv_not_possible = 1
err_otf_mc_noendmarker = 2
others = 3.
if sy-subrc ne 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
*then to send it as Email attachemnt we need to format the PDF data
call function 'SX_TABLE_LINE_WIDTH_CHANGE'
exporting
line_width_dst = '255'
tables
content_in = lt_tline
content_out = lt_objbin
exceptions
err_line_width_src_too_long = 1
err_line_width_dst_too_long = 2
err_conv_failed = 3
others = 4.
clear ls_solisti.
ls_solisti = 'Payment Notification'.
append ls_solisti to lt_objtxt.
DESCRIBE TABLE lt_objtxt LINES lv_lines.
READ TABLE lt_objtxt INDEX lv_lines.
ls_doc_chg-obj_name = 'Payment Notification'.
ls_doc_chg-expiry_dat = sy-datum + 10.
ls_doc_chg-obj_descr = 'Payment Notification'.
ls_doc_chg-sensitivty = 'F'.
ls_doc_chg-doc_size = 255.
ls_objpack-head_start = 1.
ls_objpack-head_num = 0.
ls_objpack-body_start = 1.
ls_objpack-body_num = 1. "lv_lines.
ls_objpack-doc_type = 'RAW'.
append ls_objpack to lt_objpack.
(pdf-Attachment)
ls_objpack-transf_bin = 'X'.
ls_objpack-head_start = 1.
ls_objpack-head_num = 0.
ls_objpack-body_start = 1.
describe table lt_objbin lines lv_lines.
"READ TABLE lt_objbin INDEX lv_lines.
ls_objpack-doc_size = lv_lines * 255 .
ls_objpack-body_num = lv_lines.
ls_objpack-doc_type = 'PDF'.
ls_objpack-obj_name = 'NOTIF'.
ls_objpack-obj_descr = 'Payment Notif.'.
append ls_objpack to lt_objpack.
clear lt_dli[].
lv_name = p_list.
call function 'SO_DLI_READ_API1'
exporting
dli_name = lv_name
dli_id = '000000000001'
shared_dli = 'X'
tables
dli_entries = lt_dli
exceptions
dli_not_exist = 1
operation_no_authorization = 2
parameter_error = 3
x_error = 4
others = 5.
if sy-subrc eq 0 and
lt_dli[] is not initial.
clear ls_reclist.
ls_reclist-receiver = p_list.
ls_reclist-rec_type = 'C'.
append ls_reclist to lt_reclist.
endif.
call function 'SO_NEW_DOCUMENT_ATT_SEND_API1'
exporting
document_data = ls_doc_chg
put_in_outbox = ''
tables
packing_list = lt_objpack
object_header = ls_objhead
contents_bin = lt_objbin
contents_txt = lt_objtxt
receivers = lt_reclist
exceptions
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
others = 8.
What's wrong ??
Thanks all,
RebekaHello,
Try below code
LOOP AT gt_check_data INTO gw_inc_payment.
CLEAR wa_pa0105.
READ TABLE gt_pa0105 INTO wa_pa0105
WITH KEY pernr = gw_inc_payment-pernr.
IF sy-subrc = 0. ELSE. CONDENSE wa_pa0105-usrid_long NO-GAPS.
TRANSLATE wa_pa0105-usrid_long TO LOWER CASE.
ENDIF.
CALL FUNCTION 'ZHR_ITA_MAIL_PDF'
EXPORTING
im_incentive = gw_ita_inc
im_flag = 'X'
IMPORTING
ls_job_output_info = ls_op_info
EXCEPTIONS
cntl_error_ctrl = 1
cntl_error_cont = 2
cntl_error_load = 3
cntl_error_show = 4
OTHERS = 5.
IF sy-subrc <> 0.
MESSAGE text-024 TYPE 'E'.
ELSE.
CLEAR gt_tline[].
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
format = 'PDF'
IMPORTING
bin_filesize = g_pdfsize
TABLES
otf = ls_op_info-otfdata
lines = gt_tline
EXCEPTIONS
err_max_linewidth = 1
err_format = 2
err_conv_not_possible = 3
err_bad_otf = 4
OTHERS = 5.
IF sy-subrc <> 0.
IF gt_tline IS INITIAL.
MESSAGE text-023 TYPE 'E'.
ENDIF.
ELSE.
Data handling with required length
LOOP AT gt_tline INTO gw_tline.
lv_pos = 255 - lv_len.
IF lv_pos > 134. "length of pdf_table
lv_pos = 134.
ENDIF.
gw_objbin+lv_len = gw_tline(lv_pos).
lv_len = lv_len + lv_pos.
IF lv_len = 255. "length of out (contents_bin)
APPEND gw_objbin TO gt_objbin.
CLEAR: gw_objbin, lv_len.
IF lv_pos < 134.
gw_objbin = gw_tline+lv_pos.
lv_len = 134 - lv_pos.
ENDIF.
ENDIF.
ENDLOOP.
IF lv_len > 0.
APPEND gw_objbin TO gt_objbin.
ENDIF.
CLEAR gw_objbin.
Mail process with the PDF attachment
PERFORM mail_process_attach USING wa_pa0105-usrid_long.
ENDIF.
ENDIF.
ENDLOOP.
FORM mail_process_attach USING lv_receive TYPE comm_id_long.
**//--- For Sending eMail
DATA : it_packing_list TYPE TABLE OF sopcklsti1,
wa_packing_list TYPE sopcklsti1,
it_receivers TYPE TABLE OF somlreci1,
wa_receivers TYPE somlreci1,
it_message TYPE TABLE OF solisti1,
wa_message TYPE solisti1,
it_line TYPE STANDARD TABLE OF tline,
wa_line TYPE tline,
it_attachment TYPE TABLE OF solisti1,
wa_attachment TYPE solisti1,
wa_doc_data TYPE sodocchgi1,
lv_cnt TYPE i,
lv_tablines TYPE i,
lv_subject TYPE so_obj_des,
lv_incref TYPE string.
*--Populating Mail Recepients
wa_receivers-rec_type = 'U'.
wa_receivers-com_type = 'INT'.
wa_receivers-notif_del = 'X'.
wa_receivers-notif_ndel = 'X'.
wa_receivers-express = 'X'.
assgining a receiver's mail id
wa_receivers-receiver = lv_receive.
APPEND wa_receivers TO it_receivers.
CLEAR wa_receivers.
*--Populating the body
CALL FUNCTION 'READ_TEXT'
EXPORTING
client = sy-mandt
id = 'ST'
language = sy-langu
name = gc_so10_name
object = 'TEXT'
TABLES
lines = it_line
EXCEPTIONS
id = 1
language = 2
name = 3
not_found = 4
object = 5
reference_check = 6
wrong_access_to_archive = 7
OTHERS = 8.
IF sy-subrc = 0.
LOOP AT it_line INTO wa_line.
wa_message-line = wa_line-tdline.
APPEND wa_message TO it_message.
CLEAR : wa_line, wa_message.
ENDLOOP.
ENDIF.
*//--- Populate the subject/generic message attributes
wa_doc_data-obj_langu = sy-langu.
READ TABLE it_attachment INTO wa_attachment INDEX lv_cnt.
wa_doc_data-doc_size = ( lv_cnt - 1 ) * 255 + STRLEN( wa_attachment ).
wa_doc_data-obj_name = 'SAPRPT'.
*//--- Subject Begin
CLEAR : lv_subject.
lv_subject = gw_inc_payment-pernr.
SHIFT lv_subject LEFT DELETING LEADING '0'.
CONCATENATE text-009 '(' lv_subject ')'
INTO wa_doc_data-obj_descr
SEPARATED BY space.
*//--- Subject End
wa_doc_data-sensitivty = 'F'.
*--Describe the body of the message
CLEAR : wa_packing_list, it_packing_list[].
wa_packing_list-transf_bin = space.
wa_packing_list-head_start = 1.
wa_packing_list-head_num = 0.
wa_packing_list-body_start = 1.
DESCRIBE TABLE it_message LINES wa_packing_list-body_num.
wa_packing_list-doc_type = 'RAW'.
APPEND wa_packing_list TO it_packing_list.
Filling the attachment table
DESCRIBE TABLE gt_objbin LINES lv_tablines.
wa_packing_list-transf_bin = 'X'.
wa_packing_list-head_start = 1.
wa_packing_list-head_num = 0.
wa_packing_list-body_start = 1.
wa_packing_list-body_num = lv_tablines.
wa_packing_list-doc_type = 'PDF'.
wa_packing_list-obj_name = 'ATTACHMENT'(a01).
*//--- Attachment File Name - Begin
CLEAR : lv_subject.
lv_subject = gw_inc_payment-pernr.
lv_incref = gw_inc_payment-incref.
SHIFT lv_subject LEFT DELETING LEADING '0'.
SHIFT lv_incref LEFT DELETING LEADING '0'.
CONCATENATE text-011
lv_subject
gw_inc_payment-itafy
lv_incref
INTO wa_packing_list-obj_descr
SEPARATED BY '_'.
*//--- Attachment File Name - End
wa_packing_list-doc_size = lv_tablines * 255.
APPEND wa_packing_list TO it_packing_list.
CLEAR wa_packing_list.
calling the function module to send the mail
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
EXPORTING
document_data = wa_doc_data
put_in_outbox = 'X'
sender_address = gc_sender
sender_address_type = 'INT'
commit_work = 'X'
TABLES
packing_list = it_packing_list
contents_bin = gt_objbin[]
contents_txt = it_message
receivers = it_receivers
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
IF sy-subrc <> 0.
gw_inc_payment-zmail = '0'.
gw_inc_payment-mail_status = text-022.
gw_ita_inc-zmail = '0'.
MODIFY gt_inc_payment FROM gw_inc_payment
TRANSPORTING zmail WHERE incref = gw_inc_payment-incref
AND pernr = gw_inc_payment-pernr.
MODIFY zhr_ita_inc_payk FROM gw_ita_inc.
MESSAGE text-013 TYPE 'E'.
CLEAR gw_ita_inc.
ELSE.
gw_inc_payment-zmail = '1'.
gw_inc_payment-mail_status = text-021.
gw_ita_inc-zmail = '1'.
MODIFY gt_inc_payment FROM gw_inc_payment
TRANSPORTING zmail mail_status
WHERE incref = gw_inc_payment-incref AND
pernr = gw_inc_payment-pernr.
IF sy-subrc = 0.
MODIFY zhr_ita_inc_payk FROM gw_ita_inc.
IF sy-subrc = 0.
MESSAGE text-012 TYPE 'S'.
ENDIF.
ENDIF.
CLEAR gw_ita_inc.
ENDIF.
CLEAR : it_packing_list,
gt_objbin[],
it_message[],
it_receivers[],
wa_doc_data.
ENDFORM. " MAIL_PROCESS_ATTACH
regards -
When needing to send an email from Pages a new email document does not come up. PDF
When needing to send email document from Pages when I hit Share, send via email then PDF no new email document comes up. Please advise.
Chances are you have an "illegal" character in the file name such as a / or *.
-
Sending smartform output as PDF attachment, Error opening PDF attachment
Hi Experts,
I am using the code form the following link to send a smartform output as PDF attachment. I can able to see the message, but can not open PDF document.
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/snippets/convertSmartformtoPDFformat&
The information should be on my smartform are some text, company logo and a barcode.
With all of these received error: "There was an error opening this document. The file is damaged and could not be repaired."
I tried different ways like only text, text with company logo, text with barcode. I got the following errors:
An unrecognized token 'Td0' was found
There was problem reading this document(16).
There was problem reading this document(111).
Does anyone have idea of these ? Your help is greatly appreciated.
Thank you,
Suryaplease see this code ... for sending the Email as PDF attach file,
*& Report ZSPOOLTOPDF *
*& Converts spool request into PDF document and emails it to *
*& recipicant. *
*& Execution *
*& This program must be run as a background job in-order for the write *
*& commands to create a Spool request rather than be displayed on *
*& screen *
REPORT zspooltopdf.
PARAMETER: p_email1 LIKE somlreci1-receiver
DEFAULT '[email protected]',
p_sender LIKE somlreci1-receiver
DEFAULT '[email protected]',
p_delspl AS CHECKBOX.
*DATA DECLARATION
DATA: gd_recsize TYPE i.
* Spool IDs
TYPES: BEGIN OF t_tbtcp.
INCLUDE STRUCTURE tbtcp.
TYPES: END OF t_tbtcp.
DATA: it_tbtcp TYPE STANDARD TABLE OF t_tbtcp INITIAL SIZE 0,
wa_tbtcp TYPE t_tbtcp.
* Job Runtime Parameters
DATA: gd_eventid LIKE tbtcm-eventid,
gd_eventparm LIKE tbtcm-eventparm,
gd_external_program_active LIKE tbtcm-xpgactive,
gd_jobcount LIKE tbtcm-jobcount,
gd_jobname LIKE tbtcm-jobname,
gd_stepcount LIKE tbtcm-stepcount,
gd_error TYPE sy-subrc,
gd_reciever TYPE sy-subrc.
DATA: w_recsize TYPE i.
DATA: gd_subject LIKE sodocchgi1-obj_descr,
it_mess_bod LIKE solisti1 OCCURS 0 WITH HEADER LINE,
it_mess_att LIKE solisti1 OCCURS 0 WITH HEADER LINE,
gd_sender_type LIKE soextreci1-adr_typ,
gd_attachment_desc TYPE so_obj_nam,
gd_attachment_name TYPE so_obj_des.
* Spool to PDF conversions
DATA: gd_spool_nr LIKE tsp01-rqident,
gd_destination LIKE rlgrap-filename,
gd_bytecount LIKE tst01-dsize,
gd_buffer TYPE string.
* Binary store for PDF
DATA: BEGIN OF it_pdf_output OCCURS 0.
INCLUDE STRUCTURE tline.
DATA: END OF it_pdf_output.
CONSTANTS: c_dev LIKE sy-sysid VALUE 'DEV',
c_no(1) TYPE c VALUE ' ',
c_device(4) TYPE c VALUE 'LOCL'.
*START-OF-SELECTION.
START-OF-SELECTION.
* Write statement to represent report output. Spool request is created
* if write statement is executed in background. This could also be an
* ALV grid which would be converted to PDF without any extra effort
WRITE 'Hello World'.
new-page.
commit work.
new-page print off.
IF sy-batch EQ 'X'.
PERFORM get_job_details.
PERFORM obtain_spool_id.
*** Alternative way could be to submit another program and store spool
*** id into memory, will be stored in sy-spono.
*submit ZSPOOLTOPDF2
* to sap-spool
* spool parameters %_print
* archive parameters %_print
* without spool dynpro
* and return.
* Get spool id from program called above
* IMPORT w_spool_nr FROM MEMORY ID 'SPOOLTOPDF'.
PERFORM convert_spool_to_pdf.
PERFORM process_email.
if p_delspl EQ 'X'.
PERFORM delete_spool.
endif.
IF sy-sysid = c_dev.
wait up to 5 seconds.
SUBMIT rsconn01 WITH mode = 'INT'
WITH output = 'X'
AND RETURN.
ENDIF.
ELSE.
SKIP.
WRITE:/ 'Program must be executed in background in-order for spool',
'request to be created.'.
ENDIF.
* FORM obtain_spool_id *
FORM obtain_spool_id.
CHECK NOT ( gd_jobname IS INITIAL ).
CHECK NOT ( gd_jobcount IS INITIAL ).
SELECT * FROM tbtcp
INTO TABLE it_tbtcp
WHERE jobname = gd_jobname
AND jobcount = gd_jobcount
AND stepcount = gd_stepcount
AND listident <> '0000000000'
ORDER BY jobname
jobcount
stepcount.
READ TABLE it_tbtcp INTO wa_tbtcp INDEX 1.
IF sy-subrc = 0.
message s004(zdd) with gd_spool_nr.
gd_spool_nr = wa_tbtcp-listident.
MESSAGE s004(zdd) WITH gd_spool_nr.
ELSE.
MESSAGE s005(zdd).
ENDIF.
ENDFORM.
* FORM get_job_details *
FORM get_job_details.
* Get current job details
CALL FUNCTION 'GET_JOB_RUNTIME_INFO'
IMPORTING
eventid = gd_eventid
eventparm = gd_eventparm
external_program_active = gd_external_program_active
jobcount = gd_jobcount
jobname = gd_jobname
stepcount = gd_stepcount
EXCEPTIONS
no_runtime_info = 1
OTHERS = 2.
ENDFORM.
* FORM convert_spool_to_pdf *
FORM convert_spool_to_pdf.
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
EXPORTING
src_spoolid = gd_spool_nr
no_dialog = c_no
dst_device = c_device
IMPORTING
pdf_bytecount = gd_bytecount
TABLES
pdf = it_pdf_output
EXCEPTIONS
err_no_abap_spooljob = 1
err_no_spooljob = 2
err_no_permission = 3
err_conv_not_possible = 4
err_bad_destdevice = 5
user_cancelled = 6
err_spoolerror = 7
err_temseerror = 8
err_btcjob_open_failed = 9
err_btcjob_submit_failed = 10
err_btcjob_close_failed = 11
OTHERS = 12.
CHECK sy-subrc = 0.
* Transfer the 132-long strings to 255-long strings
LOOP AT it_pdf_output.
TRANSLATE it_pdf_output USING ' ~'.
CONCATENATE gd_buffer it_pdf_output INTO gd_buffer.
ENDLOOP.
TRANSLATE gd_buffer USING '~ '.
DO.
it_mess_att = gd_buffer.
APPEND it_mess_att.
SHIFT gd_buffer LEFT BY 255 PLACES.
IF gd_buffer IS INITIAL.
EXIT.
ENDIF.
ENDDO.
ENDFORM.
* FORM process_email *
FORM process_email.
DESCRIBE TABLE it_mess_att LINES gd_recsize.
CHECK gd_recsize > 0.
PERFORM send_email USING p_email1.
* perform send_email using p_email2.
ENDFORM.
* FORM send_email *
* --> p_email *
FORM send_email USING p_email.
CHECK NOT ( p_email IS INITIAL ).
REFRESH it_mess_bod.
* Default subject matter
gd_subject = 'Subject'.
gd_attachment_desc = 'Attachname'.
* CONCATENATE 'attach_name' ' ' INTO gd_attachment_name.
it_mess_bod = 'Message Body text, line 1'.
APPEND it_mess_bod.
it_mess_bod = 'Message Body text, line 2...'.
APPEND it_mess_bod.
* If no sender specified - default blank
IF p_sender EQ space.
gd_sender_type = space.
ELSE.
gd_sender_type = 'INT'.
ENDIF.
* Send file by email as .xls speadsheet
PERFORM send_file_as_email_attachment
tables it_mess_bod
it_mess_att
using p_email
'Example .xls documnet attachment'
'PDF'
gd_attachment_name
gd_attachment_desc
p_sender
gd_sender_type
changing gd_error
gd_reciever.
ENDFORM.
* FORM delete_spool *
FORM delete_spool.
DATA: ld_spool_nr TYPE tsp01_sp0r-rqid_char.
ld_spool_nr = gd_spool_nr.
CHECK p_delspl <> c_no.
CALL FUNCTION 'RSPO_R_RDELETE_SPOOLREQ'
EXPORTING
spoolid = ld_spool_nr.
ENDFORM.
*& Form SEND_FILE_AS_EMAIL_ATTACHMENT
* Send email
FORM send_file_as_email_attachment tables it_message
it_attach
using p_email
p_mtitle
p_format
p_filename
p_attdescription
p_sender_address
p_sender_addres_type
changing p_error
p_reciever.
DATA: ld_error TYPE sy-subrc,
ld_reciever TYPE sy-subrc,
ld_mtitle LIKE sodocchgi1-obj_descr,
ld_email LIKE somlreci1-receiver,
ld_format TYPE so_obj_tp ,
ld_attdescription TYPE so_obj_nam ,
ld_attfilename TYPE so_obj_des ,
ld_sender_address LIKE soextreci1-receiver,
ld_sender_address_type LIKE soextreci1-adr_typ,
ld_receiver LIKE sy-subrc.
data: t_packing_list like sopcklsti1 occurs 0 with header line,
t_contents like solisti1 occurs 0 with header line,
t_receivers like somlreci1 occurs 0 with header line,
t_attachment like solisti1 occurs 0 with header line,
t_object_header like solisti1 occurs 0 with header line,
w_cnt type i,
w_sent_all(1) type c,
w_doc_data like sodocchgi1.
ld_email = p_email.
ld_mtitle = p_mtitle.
ld_format = p_format.
ld_attdescription = p_attdescription.
ld_attfilename = p_filename.
ld_sender_address = p_sender_address.
ld_sender_address_type = p_sender_addres_type.
* Fill the document data.
w_doc_data-doc_size = 1.
* Populate the subject/generic message attributes
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle .
w_doc_data-sensitivty = 'F'.
* Fill the document data and get size of attachment
CLEAR w_doc_data.
READ TABLE it_attach INDEX w_cnt.
w_doc_data-doc_size =
( w_cnt - 1 ) * 255 + STRLEN( it_attach ).
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle.
w_doc_data-sensitivty = 'F'.
CLEAR t_attachment.
REFRESH t_attachment.
t_attachment[] = it_attach[].
* Describe the body of the message
CLEAR t_packing_list.
REFRESH t_packing_list.
t_packing_list-transf_bin = space.
t_packing_list-head_start = 1.
t_packing_list-head_num = 0.
t_packing_list-body_start = 1.
DESCRIBE TABLE it_message LINES t_packing_list-body_num.
t_packing_list-doc_type = 'RAW'.
APPEND t_packing_list.
* Create attachment notification
t_packing_list-transf_bin = 'X'.
t_packing_list-head_start = 1.
t_packing_list-head_num = 1.
t_packing_list-body_start = 1.
DESCRIBE TABLE t_attachment LINES t_packing_list-body_num.
t_packing_list-doc_type = ld_format.
t_packing_list-obj_descr = ld_attdescription.
t_packing_list-obj_name = ld_attfilename.
t_packing_list-doc_size = t_packing_list-body_num * 255.
APPEND t_packing_list.
* Add the recipients email address
CLEAR t_receivers.
REFRESH t_receivers.
t_receivers-receiver = ld_email.
t_receivers-rec_type = 'U'.
t_receivers-com_type = 'INT'.
t_receivers-notif_del = 'X'.
t_receivers-notif_ndel = 'X'.
APPEND t_receivers.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
EXPORTING
document_data = w_doc_data
put_in_outbox = 'X'
sender_address = ld_sender_address
sender_address_type = ld_sender_address_type
commit_work = 'X'
IMPORTING
sent_to_all = w_sent_all
TABLES
packing_list = t_packing_list
contents_bin = t_attachment
contents_txt = it_message
receivers = t_receivers
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
* Populate zerror return code
ld_error = sy-subrc.
* Populate zreceiver return code
LOOP AT t_receivers.
ld_receiver = t_receivers-retrn_code.
ENDLOOP.
ENDFORM.
reward points if it is usefull ....
Girish -
How to send ALV report by email, in the body of the email?
Hello friends,
I need to send a report ALV by email. First, the user wanted it attached as PDF file, but now he wants it in the body of the email.
Does anybody have any solution?
P.S.: I am using methods to send the email.
Thanks in advance.
Karla.Thank you Jan,
I used the following solution to get the report in HTML code:
I use submit to export the list to memory
SUBMIT zsdr006_alv EXPORTING LIST TO MEMORY AND RETURN.
Them I get the list from memory
CALL FUNCTION 'LIST_FROM_MEMORY'
Finaly I convert the list to HTML code
CALL FUNCTION 'WWW_HTML_FROM_LISTOBJECT'
The problem is when I send the email, it is still not going on the body of the email.
I tried taking off the attach method, but the email goes blank in the body.
Actually to SOST the message goes with the HMTL report in the body, just like I need, but when send to any e-mail address, it does not go on the body of the message.
Does any body could check this out?
TRY.
-------- create persistent send request ------------------------
send_request = cl_bcs=>create_persistent( ).
-------- create and set document with attachment ---------------
create document from internal table with text
IF p_pdf EQ 'X'.
l_type = 'RAW'.
APPEND text-t01 TO text.
IF NOT s_erdat-low IS INITIAL.
CONCATENATE s_erdat-low6(2) '.' s_erdat-low4(2) '.' s_erdat-low(4) INTO ls_text-line.
IF NOT s_erdat-high IS INITIAL.
CONCATENATE ls_text-line 'a' INTO ls_text-line SEPARATED BY space.
CONCATENATE ls_text-line s_erdat-high+6(2) INTO ls_text-line SEPARATED BY space.
CONCATENATE ls_text-line '.' s_erdat-high+4(2) '.' s_erdat-high(4) INTO ls_text-line.
ENDIF.
CONCATENATE 'Período:' ls_text-line INTO ls_text-line SEPARATED BY space.
APPEND ls_text TO text.
ENDIF.
ELSEIF p_htm EQ 'X'.
l_type = 'HTM'.
LOOP AT gt_ascdata INTO ls_ascdata.
ls_text = ls_ascdata-line.
APPEND ls_text TO text.
ENDLOOP.
ENDIF.
subject = text-t01.
document = cl_document_bcs=>create_document(
i_type = l_type
i_text = text
i_length = '12'
i_subject = subject ).
add attachment to document
BCS expects document content here e.g. from document upload
binary_content = ...
IF p_pdf EQ 'X'.
CALL METHOD document->add_attachment
EXPORTING
i_attachment_type = 'PDF'
i_attachment_subject = g_filename
i_att_content_hex = binary_content.
ELSEIF p_htm EQ 'X'.
CALL METHOD document->add_attachment
EXPORTING
i_attachment_type = 'HTM'
i_attachment_subject = g_filename
i_att_content_text = gt_ascdata.
ENDIF.
add document to send request
CALL METHOD send_request->set_document( document ).
--------- set sender -------------------------------------------
note: this is necessary only if you want to set the sender
different from actual user (SY-UNAME). Otherwise sender is
set automatically with actual user.
sender = cl_sapuser_bcs=>create( sy-uname ).
lv_email = g_email.
sender = cl_cam_address_bcs=>create_internet_address( lv_email ).
CALL METHOD send_request->set_sender
EXPORTING
i_sender = sender.
--------- add recipient (e-mail address) -----------------------
create recipient - please replace e-mail address !!!
LOOP AT s_email.
lv_email = s_email-low.
recipient = cl_cam_address_bcs=>create_internet_address( lv_email ).
add recipient with its respective attributes to send request
CALL METHOD send_request->add_recipient
EXPORTING
i_recipient = recipient
i_express = 'X'.
ENDLOOP.
---------- send document ---------------------------------------
CALL METHOD send_request->send(
EXPORTING
i_with_error_screen = 'X'
RECEIVING
result = sent_to_all ). -
Email in PDF format through ALV
Hi Everybody,
I have a query related to simple ALV report...i want to send a email of the output list of my ALV report in pdf format to a certain person's email id...
Please can anybody suggest me how to do this?
Its very urgent....
With regards,
AsishThe code below demonstrates how to retrieve a spool request and email it as a PDF document. Please note
for the below program to process a spool request the program must be executed in background otherwise no
spool request will be created. Once you have had a look at this there is an modified version of the program
which works in both background and foreground. Also see transaction SCOT for SAPConnect administration.
*& Report ZSPOOLTOPDF *
*& Converts spool request into PDF document and emails it to *
*& recipicant. *
*& Execution *
*& This program must be run as a background job in-order for the write *
*& commands to create a Spool request rather than be displayed on *
*& screen *
REPORT zspooltopdf.
PARAMETER: p_email1 LIKE somlreci1-receiver
DEFAULT '[email protected]',
p_sender LIKE somlreci1-receiver
DEFAULT '[email protected]',
p_delspl AS CHECKBOX.
*DATA DECLARATION
DATA: gd_recsize TYPE i.
Spool IDs
TYPES: BEGIN OF t_tbtcp.
INCLUDE STRUCTURE tbtcp.
TYPES: END OF t_tbtcp.
DATA: it_tbtcp TYPE STANDARD TABLE OF t_tbtcp INITIAL SIZE 0,
wa_tbtcp TYPE t_tbtcp.
Job Runtime Parameters
DATA: gd_eventid LIKE tbtcm-eventid,
gd_eventparm LIKE tbtcm-eventparm,
gd_external_program_active LIKE tbtcm-xpgactive,
gd_jobcount LIKE tbtcm-jobcount,
gd_jobname LIKE tbtcm-jobname,
gd_stepcount LIKE tbtcm-stepcount,
gd_error TYPE sy-subrc,
gd_reciever TYPE sy-subrc.
DATA: w_recsize TYPE i.
DATA: gd_subject LIKE sodocchgi1-obj_descr,
it_mess_bod LIKE solisti1 OCCURS 0 WITH HEADER LINE,
it_mess_att LIKE solisti1 OCCURS 0 WITH HEADER LINE,
gd_sender_type LIKE soextreci1-adr_typ,
gd_attachment_desc TYPE so_obj_nam,
gd_attachment_name TYPE so_obj_des.
Spool to PDF conversions
DATA: gd_spool_nr LIKE tsp01-rqident,
gd_destination LIKE rlgrap-filename,
gd_bytecount LIKE tst01-dsize,
gd_buffer TYPE string.
Binary store for PDF
DATA: BEGIN OF it_pdf_output OCCURS 0.
INCLUDE STRUCTURE tline.
DATA: END OF it_pdf_output.
CONSTANTS: c_dev LIKE sy-sysid VALUE 'DEV',
c_no(1) TYPE c VALUE ' ',
c_device(4) TYPE c VALUE 'LOCL'.
*START-OF-SELECTION.
START-OF-SELECTION.
Write statement to represent report output. Spool request is created
if write statement is executed in background. This could also be an
ALV grid which would be converted to PDF without any extra effort
WRITE 'Hello World'.
new-page.
commit work.
new-page print off.
IF sy-batch EQ 'X'.
PERFORM get_job_details.
PERFORM obtain_spool_id.
Alternative way could be to submit another program and store spool
id into memory, will be stored in sy-spono.
*submit ZSPOOLTOPDF2
to sap-spool
spool parameters %_print
archive parameters %_print
without spool dynpro
and return.
Get spool id from program called above
IMPORT w_spool_nr FROM MEMORY ID 'SPOOLTOPDF'.
PERFORM convert_spool_to_pdf.
PERFORM process_email.
if p_delspl EQ 'X'.
PERFORM delete_spool.
endif.
IF sy-sysid = c_dev.
wait up to 5 seconds.
SUBMIT rsconn01 WITH mode = 'INT'
WITH output = 'X'
AND RETURN.
ENDIF.
ELSE.
SKIP.
WRITE:/ 'Program must be executed in background in-order for spool',
'request to be created.'.
ENDIF.
FORM obtain_spool_id *
FORM obtain_spool_id.
CHECK NOT ( gd_jobname IS INITIAL ).
CHECK NOT ( gd_jobcount IS INITIAL ).
SELECT * FROM tbtcp
INTO TABLE it_tbtcp
WHERE jobname = gd_jobname
AND jobcount = gd_jobcount
AND stepcount = gd_stepcount
AND listident '0000000000'
ORDER BY jobname
jobcount
stepcount.
READ TABLE it_tbtcp INTO wa_tbtcp INDEX 1.
IF sy-subrc = 0.
message s004(zdd) with gd_spool_nr.
gd_spool_nr = wa_tbtcp-listident.
MESSAGE s004(zdd) WITH gd_spool_nr.
ELSE.
MESSAGE s005(zdd).
ENDIF.
ENDFORM.
FORM get_job_details *
FORM get_job_details.
Get current job details
CALL FUNCTION 'GET_JOB_RUNTIME_INFO'
IMPORTING
eventid = gd_eventid
eventparm = gd_eventparm
external_program_active = gd_external_program_active
jobcount = gd_jobcount
jobname = gd_jobname
stepcount = gd_stepcount
EXCEPTIONS
no_runtime_info = 1
OTHERS = 2.
ENDFORM.
FORM convert_spool_to_pdf *
FORM convert_spool_to_pdf.
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
EXPORTING
src_spoolid = gd_spool_nr
no_dialog = c_no
dst_device = c_device
IMPORTING
pdf_bytecount = gd_bytecount
TABLES
pdf = it_pdf_output
EXCEPTIONS
err_no_abap_spooljob = 1
err_no_spooljob = 2
err_no_permission = 3
err_conv_not_possible = 4
err_bad_destdevice = 5
user_cancelled = 6
err_spoolerror = 7
err_temseerror = 8
err_btcjob_open_failed = 9
err_btcjob_submit_failed = 10
err_btcjob_close_failed = 11
OTHERS = 12.
CHECK sy-subrc = 0.
Transfer the 132-long strings to 255-long strings
LOOP AT it_pdf_output.
TRANSLATE it_pdf_output USING ' ~'.
CONCATENATE gd_buffer it_pdf_output INTO gd_buffer.
ENDLOOP.
TRANSLATE gd_buffer USING '~ '.
DO.
it_mess_att = gd_buffer.
APPEND it_mess_att.
SHIFT gd_buffer LEFT BY 255 PLACES.
IF gd_buffer IS INITIAL.
EXIT.
ENDIF.
ENDDO.
ENDFORM.
FORM process_email *
FORM process_email.
DESCRIBE TABLE it_mess_att LINES gd_recsize.
CHECK gd_recsize > 0.
PERFORM send_email USING p_email1.
perform send_email using p_email2.
ENDFORM.
FORM send_email *
--> p_email *
FORM send_email USING p_email.
CHECK NOT ( p_email IS INITIAL ).
REFRESH it_mess_bod.
Default subject matter
gd_subject = 'Subject'.
gd_attachment_desc = 'Attachname'.
CONCATENATE 'attach_name' ' ' INTO gd_attachment_name.
it_mess_bod = 'Message Body text, line 1'.
APPEND it_mess_bod.
it_mess_bod = 'Message Body text, line 2...'.
APPEND it_mess_bod.
If no sender specified - default blank
IF p_sender EQ space.
gd_sender_type = space.
ELSE.
gd_sender_type = 'INT'.
ENDIF.
Send file by email as .xls speadsheet
PERFORM send_file_as_email_attachment
tables it_mess_bod
it_mess_att
using p_email
'Example .xls documnet attachment'
'PDF'
gd_attachment_name
gd_attachment_desc
p_sender
gd_sender_type
changing gd_error
gd_reciever.
ENDFORM.
FORM delete_spool *
FORM delete_spool.
DATA: ld_spool_nr TYPE tsp01_sp0r-rqid_char.
ld_spool_nr = gd_spool_nr.
CHECK p_delspl c_no.
CALL FUNCTION 'RSPO_R_RDELETE_SPOOLREQ'
EXPORTING
spoolid = ld_spool_nr.
ENDFORM.
*& Form SEND_FILE_AS_EMAIL_ATTACHMENT
Send email
FORM send_file_as_email_attachment tables it_message
it_attach
using p_email
p_mtitle
p_format
p_filename
p_attdescription
p_sender_address
p_sender_addres_type
changing p_error
p_reciever.
DATA: ld_error TYPE sy-subrc,
ld_reciever TYPE sy-subrc,
ld_mtitle LIKE sodocchgi1-obj_descr,
ld_email LIKE somlreci1-receiver,
ld_format TYPE so_obj_tp ,
ld_attdescription TYPE so_obj_nam ,
ld_attfilename TYPE so_obj_des ,
ld_sender_address LIKE soextreci1-receiver,
ld_sender_address_type LIKE soextreci1-adr_typ,
ld_receiver LIKE sy-subrc.
data: t_packing_list like sopcklsti1 occurs 0 with header line,
t_contents like solisti1 occurs 0 with header line,
t_receivers like somlreci1 occurs 0 with header line,
t_attachment like solisti1 occurs 0 with header line,
t_object_header like solisti1 occurs 0 with header line,
w_cnt type i,
w_sent_all(1) type c,
w_doc_data like sodocchgi1.
ld_email = p_email.
ld_mtitle = p_mtitle.
ld_format = p_format.
ld_attdescription = p_attdescription.
ld_attfilename = p_filename.
ld_sender_address = p_sender_address.
ld_sender_address_type = p_sender_addres_type.
Fill the document data.
w_doc_data-doc_size = 1.
Populate the subject/generic message attributes
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle .
w_doc_data-sensitivty = 'F'.
Fill the document data and get size of attachment
CLEAR w_doc_data.
READ TABLE it_attach INDEX w_cnt.
w_doc_data-doc_size =
( w_cnt - 1 ) * 255 + STRLEN( it_attach ).
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle.
w_doc_data-sensitivty = 'F'.
CLEAR t_attachment.
REFRESH t_attachment.
t_attachment] = it_attach[.
Describe the body of the message
CLEAR t_packing_list.
REFRESH t_packing_list.
t_packing_list-transf_bin = space.
t_packing_list-head_start = 1.
t_packing_list-head_num = 0.
t_packing_list-body_start = 1.
DESCRIBE TABLE it_message LINES t_packing_list-body_num.
t_packing_list-doc_type = 'RAW'.
APPEND t_packing_list.
Create attachment notification
t_packing_list-transf_bin = 'X'.
t_packing_list-head_start = 1.
t_packing_list-head_num = 1.
t_packing_list-body_start = 1.
DESCRIBE TABLE t_attachment LINES t_packing_list-body_num.
t_packing_list-doc_type = ld_format.
t_packing_list-obj_descr = ld_attdescription.
t_packing_list-obj_name = ld_attfilename.
t_packing_list-doc_size = t_packing_list-body_num * 255.
APPEND t_packing_list.
Add the recipients email address
CLEAR t_receivers.
REFRESH t_receivers.
t_receivers-receiver = ld_email.
t_receivers-rec_type = 'U'.
t_receivers-com_type = 'INT'.
t_receivers-notif_del = 'X'.
t_receivers-notif_ndel = 'X'.
APPEND t_receivers.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
EXPORTING
document_data = w_doc_data
put_in_outbox = 'X'
sender_address = ld_sender_address
sender_address_type = ld_sender_address_type
commit_work = 'X'
IMPORTING
sent_to_all = w_sent_all
TABLES
packing_list = t_packing_list
contents_bin = t_attachment
contents_txt = it_message
receivers = t_receivers
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
Populate zerror return code
ld_error = sy-subrc.
Populate zreceiver return code
LOOP AT t_receivers.
ld_receiver = t_receivers-retrn_code.
ENDLOOP.
ENDFORM.
Reward points if useful. -
Block List ALV Output Send As Email Attachment
Hi, All The ABAP Gurus,
I have made a block ALV Report. I want that this output should be converted into .xls with HTML format and this should be send in email as attachment. This all will be made in a background job which will be scheduled daily.
How can I achieve this? I know that the output of classical report can be attached as pdf in email.But I want in Block ALV.
Thanks in Advance.
Regards,
Bharti Jain
Edited by: Bharti Jain on Jun 28, 2011 10:20 AMHi
Not 100 percent sure what you want to do here. I am confused by the .xls in html format. If you want the output in html you can submit the program and export the list to memory, Then retrieve the list and convert it to html. i have done this with the program 1sdbf12l/rv14akzy . see code below. This converts the output to html, you are left with a binary itab and size at the end of the routine and this can be attached to an email.
Submit Program and export the list to Memory
SUBMIT /1sdbf12l/rv14akzy USING SELECTION-SCREEN '1000'
WITH SELECTION-TABLE lt_params_new EXPORTING LIST TO MEMORY AND RETURN.
CALL FUNCTION 'LIST_FROM_MEMORY'
TABLES
listobject = lt_list
EXCEPTIONS
not_found = 1
OTHERS = 2.
Convert the List to html
IF sy-subrc = 0.
DATA: it_html TYPE TABLE OF bapihtml WITH HEADER LINE,
it_html_out TYPE TABLE OF bapihtml WITH HEADER LINE,
lt_html TYPE TABLE OF bapihtml WITH HEADER LINE,
lv_html LIKE LINE OF it_html,
lv_html_out TYPE string.
DATA: lv_html_tab_wide(50000) TYPE c.
DATA: lineno TYPE i, length TYPE i, size TYPE i.
DATA: gui_codepage(4) TYPE n, " added for message 500824
is_unicode TYPE rststype-sel_ok.
DATA: convert_output TYPE xstring,
convert_buffer TYPE xstring.
CALL FUNCTION 'LIST_FREE_MEMORY'
TABLES
listobject = lt_list.
CALL FUNCTION 'WWW_HTML_FROM_LISTOBJECT'
EXPORTING
REPORT_NAME =
template_name = 'WEBREPORTING_REPORT'
TABLES
html = it_html
listobject = lt_list.
DESCRIBE TABLE it_html LINES lineno .
DESCRIBE FIELD it_html LENGTH length IN BYTE MODE.
size = length * lineno.
CALL 'CUR_LCL' ID 'GUICP' FIELD gui_codepage.
CALL FUNCTION 'SCP_GET_CODEPAGE_PROPERTIES'
EXPORTING
codepage = gui_codepage
IMPORTING
can_unicode = is_unicode
EXCEPTIONS
codepage_unknown = 1.
IF sy-subrc <> 0.
CLEAR gui_codepage.
ENDIF.
IF is_unicode EQ 'X'. "in case of unicode, always use utf-8
gui_codepage = '4110'.
ENDIF.
CLEAR: convert_output, convert_buffer.
LOOP AT it_html INTO lv_html.
REPLACE ALL OCCURRENCES OF c_bg_def IN lv_html WITH c_bg_white.
CALL FUNCTION 'SCP_TRANSLATE_CHARS'
EXPORTING
inbuff = lv_html
outcode = gui_codepage
csubst = 'X'
substc_space = 'X'
IMPORTING
outbuff = convert_output
EXCEPTIONS
invalid_codepage = 1
internal_error = 2
cannot_convert = 3
fields_bad_type = 4
OTHERS = 5.
IF sy-subrc <> 0.
message i020 raising download_error.
ENDIF.
CONCATENATE convert_buffer convert_output INTO convert_buffer IN
BYTE MODE.
CONCATENATE lv_html_out lv_html INTO lv_html_out.
ENDLOOP.
ev_html_string = lv_html_out.
i = 0.
DESCRIBE FIELD html_tab_converted LENGTH tablength IN BYTE MODE.
WHILE i < XSTRLEN( convert_buffer ).
dummy = XSTRLEN( convert_buffer ) - i.
IF tablength > dummy.
html_tab_converted-line = convert_buffer+i(dummy).
ELSE.
html_tab_converted-line = convert_buffer+i(tablength).
ENDIF.
i = i + tablength.
APPEND html_tab_converted.
ENDWHILE.
et_bin[] = html_tab_converted[].
ev_bin_size = size. -
Sending an email of the layout in PDF attachement
Hello All,
I have written a program to send the layout in PDF format to send in a mail to the customer.
The email is going fne with the PDF attachement in the development box, but it is not working in Quality box.
In the Quality box the email is going but the attachement is not opening.
I have used CONVERT_OTF function module for converting OTF format to PDF format. As per my analysis it is returning the PDF format properly in Developement box but not the same in Quality. In Quality the the data returning in PDF format is not in proper manner. It is giving some junk data with symbols like traingle, rectange..etc..
I am using FM SO_OBJECT_SEND for sending an email.
Can you please suggest me what may be problem?
Valuable answers will be rewarded.
Thanks & Regards,
Satish.Hi,
you need to save the File in PDF format not in the text format.
check whether the file is saved in pdf format or not.
Regards,
Raj. -
Convert spool to pdf and send in email sometimes attachment duplicated.
Hi all, I have a process that creates a spool, converts it to a pdf and then attaches it to an email. My problem is that sometimes, the same attachment is duplicated.
The process seems to work fine in debug mode (the attachment changes for each loop) but when I run it in the background, every few emails, it will duplicate an attachment.
I have noticed that the size of the pdf seems to change properly but that the content of the pdf does not match. So, it is like it gets the correct size of the pdf but not the body.
This is code that a consultant wrote and I am pretty new to abap/sap. I have changed some of the code because it was trying to handle an endless loop (I figured it should not have to handle (be in) an endless loop). I changed that code and it is working but this previous issue still exists. Thanks for your help.
*& Form PROCESS_EMPLOYEE
FORM process_employee .
* process appraisal only
IF it_final[] IS NOT INITIAL .
* READ DISTRIBUTION LIST *
REFRESH : it_email, it_idlient.
*Sort by supervisor
SORT it_final[] BY supervisor.
LOOP AT it_final INTO wa_final .
APPEND wa_final TO it_final1 .
AT END OF supervisor .
* Perform to create the PDF from the Output
report = 'zhr_pm_appemail'.
PERFORM create_pdf using report.
** Perform to email the PDF attachment
** to the supervisor and the Mailing list
subject = 'Performance Appraisals'.
PERFORM process_email using subject.
REFRESH it_final1 .
CLEAR it_final1 .
CLEAR wa_final .
FREE MEMORY ID 'MEM'.
ENDAT .
ENDLOOP.
ENDIF.
ENDFORM. " PROCESS_EMPLOYEE
*& Form CREATE_PDF
FORM create_pdf using report.
DATA: spoolno TYPE tsp01-rqident.
DATA : p_repid TYPE sy-repid .
DATA: v_len TYPE i , v_len1 TYPE i .
DATA: v_temp(8) TYPE c .
DATA: p_uname TYPE sy-uname .
DATA: it_tsp01 TYPE STANDARD TABLE OF tsp01 WITH HEADER LINE .
* DATA: it_pdf TYPE tline OCCURS 0 WITH HEADER LINE .
TABLES: tsp01.
DATA: var TYPE c .
*-- STRUCTURES
DATA:
lc_rq2name TYPE tsp01-rq2name.
DATA:
mstr_print_parms TYPE pri_params,
mc_valid(1) TYPE c,
mi_bytecount TYPE i,
mi_length TYPE i,
mi_rqident TYPE tsp01-rqident.
*-- INTERNAL TABLES
DATA:
mtab_pdf TYPE tline OCCURS 0 WITH HEADER LINE,
mc_filename TYPE rlgrap-filename.
*-- SELECTION SCREEN
DATA:
p_linsz TYPE sy-linsz VALUE 80, " Line size
p_paart TYPE sy-paart VALUE 'X_65_80'. " Paper Format
p_uname = sy-uname .
var = var + 1.
p_repid = report.
* START-OF-SELECTION .
concatenate p_repid+0(9)
p_uname+0(3)
into mc_filename
separated by '_'.
translate mc_filename to upper case.
*-- Setup the Print Parmaters
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING
authority = space
copies = '1'
cover_page = space
data_set = space
department = space
destination = space
expiration = '1'
immediately = space
new_list_id = 'X'
no_dialog = 'X'
user = sy-uname
IMPORTING
out_parameters = mstr_print_parms
valid = mc_valid
EXCEPTIONS
archive_info_not_found = 1
invalid_print_params = 2
invalid_archive_params = 3
OTHERS = 4.
IF sy-subrc = 0 .
*--Make sure that a printer destination has been set up. If this is not done the PDF module abends.
*-- Explicitly set line width, and output format so that
*-- the PDF conversion comes out OK
mstr_print_parms-linsz = p_linsz.
mstr_print_parms-paart = p_paart.
EXPORT it_final1 it_email p_email1 p_sender p_date vl_nmth
TO MEMORY ID 'MEM' .
IF report = 'zhr_pm_appandprogemail'.
SUBMIT zhr_pm_appandprogemail TO SAP-SPOOL WITHOUT SPOOL DYNPRO
SPOOL PARAMETERS mstr_print_parms
VIA SELECTION-SCREEN AND RETURN.
ENDIF.
IF report = 'zhr_pm_appemail'.
SUBMIT zhr_pm_appemail TO SAP-SPOOL WITHOUT SPOOL DYNPRO
SPOOL PARAMETERS mstr_print_parms
VIA SELECTION-SCREEN AND RETURN.
ENDIF.
ENDIF.
*Find out what the spool number is that was just created
perform get_spool_number using p_repid p_uname changing mi_rqident.
*converting the spool request into pdf
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
EXPORTING
src_spoolid = mi_rqident
no_dialog = space
dst_device = mstr_print_parms-pdest
IMPORTING
pdf_bytecount = mi_bytecount
TABLES
pdf = it_pdf
EXCEPTIONS
err_no_abap_spooljob = 1
err_no_spooljob = 2
err_no_permission = 3
err_conv_not_possible = 4
err_bad_destdevice = 5
user_cancelled = 6
err_spoolerror = 7
err_temseerror = 8
err_btcjob_open_failed = 9
err_btcjob_submit_failed = 10
err_btcjob_close_failed = 11
OTHERS = 12.
* call function 'DOWNLOAD'
* exporting
* bin_filesize = mi_bytecount
* filename = mc_filename
* filetype = 'BIN'
* importing
* act_filename = mc_filename
* tables
* data_tab = it_mess_att.
CHECK sy-subrc = 0.
* Transfer the 132-long strings to 255-long strings
LOOP AT it_pdf INTO wa_pdf.
TRANSLATE wa_pdf USING ' ~'.
CONCATENATE v_gd_buffer wa_pdf INTO v_gd_buffer.
CLEAR wa_pdf .
ENDLOOP.
TRANSLATE v_gd_buffer USING '~ '.
DO.
it_mess_att = v_gd_buffer.
APPEND it_mess_att.
SHIFT v_gd_buffer LEFT BY 255 PLACES.
IF v_gd_buffer IS INITIAL.
EXIT.
ENDIF.
ENDDO.
ENDFORM. " CREATE_PDF
* FORM get_spool_nunber *
* Get the most recent spool created by user/report *
form get_spool_number using f_repid
f_uname changing f_rqident.
data:
lc_rq2name TYPE rlgrap-filename.
concatenate f_repid+0(6)
f_repid+7(3)
f_uname+0(3)
into lc_rq2name.
* separated by '_'.
translate lc_rq2name to upper case.
select * from tsp01 where rq2name = lc_rq2name
order by rqcretime descending.
f_rqident = tsp01-rqident.
exit.
endselect.
if sy-subrc ne 0.
clear f_rqident.
endif.
endform. " get spool number
*& Form SEND_MAIL
FORM send_email USING p_email subject.
REFRESH it_mess_bod.
* Default subject matter
gd_subject = text-019 ."'Subject'.
gd_attachment_desc = text-020 ."'Performance Appraisal'.
IF subject = 'Performance Appraisals and Progression I'.
gd_attachment_desc = 'PerfAppAndProg'.
ENDIF.
IF subject = 'Performance Appraisals'.
gd_attachment_desc = 'PerfAppraisal'.
ENDIF.
* If no sender specified - default blank
IF p_sender EQ space.
gd_sender_type = space.
ELSE.
gd_sender_type = 'INT'.
ENDIF.
* Send file by email as .pdf
PERFORM send_file_as_email_attachment
TABLES it_mess_bod
it_mess_att
USING p_email
subject
'PDF'
gd_attachment_desc
gd_attachment_desc
p_sender
gd_sender_type
CHANGING gd_error
gd_reciever.
ENDFORM. " SEND_MAIL
* FORM process_email *
FORM process_email using subject.
DESCRIBE TABLE it_mess_att LINES gd_recsize.
CHECK gd_recsize > 0.
PERFORM send_email USING p_email1 subject.
* perform send_email using p_email2.
ENDFORM. "process_email
*& Form SEND_FILE_AS_EMAIL_ATTACHMENT
* Send email
FORM send_file_as_email_attachment TABLES it_message
it_attach
USING p_email
p_mtitle
p_format
p_filename
p_attdescription
p_sender_address
p_sender_addres_type
CHANGING p_error
p_reciever.
CLEAR : ld_email , ld_mtitle , ld_format , ld_attdescription ,
ld_attfilename , ld_sender_address , ld_sender_address_type ,
w_doc_data.
REFRESH: t_packing_list.
ld_email = p_email.
ld_mtitle = p_mtitle.
ld_format = p_format.
ld_attdescription = p_attdescription.
ld_attfilename = p_filename.
ld_sender_address = p_sender_address.
ld_sender_address_type = p_sender_addres_type.
* Fill the document data.
w_doc_data-doc_size = 1.
* Populate the subject/generic message attributes
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle .
w_doc_data-sensitivty = 'F'.
* Fill the document data and get size of attachment
CLEAR w_doc_data.
READ TABLE it_attach INDEX w_cnt.
w_doc_data-doc_size =
( w_cnt - 1 ) * 255 + STRLEN( it_attach ).
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle.
w_doc_data-sensitivty = 'F'.
CLEAR t_attachment.
REFRESH t_attachment.
t_attachment[] = it_attach[].
* Describe the body of the message
CLEAR t_packing_list.
REFRESH t_packing_list.
t_packing_list-transf_bin = space.
t_packing_list-head_start = 1.
t_packing_list-head_num = 0.
t_packing_list-body_start = 1.
DESCRIBE TABLE it_message LINES t_packing_list-body_num.
t_packing_list-doc_type = 'RAW'.
APPEND t_packing_list.
* Create attachment notification
t_packing_list-transf_bin = 'X'.
t_packing_list-head_start = 1.
t_packing_list-head_num = 1.
t_packing_list-body_start = 1.
DESCRIBE TABLE t_attachment LINES t_packing_list-body_num.
t_packing_list-doc_type = ld_format.
t_packing_list-obj_descr = ld_attdescription.
t_packing_list-obj_name = ld_attfilename.
t_packing_list-doc_size = t_packing_list-body_num * 255.
APPEND t_packing_list.
* Add the recipients email address
CLEAR t_receivers.
t_receivers-receiver = ld_email.
t_receivers-rec_type = 'U'.
t_receivers-com_type = 'INT'.
t_receivers-notif_del = 'X'.
t_receivers-notif_ndel = 'X'.
APPEND t_receivers.
LOOP AT it_email.
* Add the recipients email address
t_receivers-receiver = it_email.
t_receivers-rec_type = 'U'.
t_receivers-com_type = 'INT'.
t_receivers-notif_del = 'X'.
t_receivers-notif_ndel = 'X'.
APPEND t_receivers.
ENDLOOP.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
EXPORTING
document_data = w_doc_data
put_in_outbox = 'X'
sender_address = ld_sender_address
sender_address_type = ld_sender_address_type
commit_work = 'X'
IMPORTING
sent_to_all = w_sent_all
TABLES
packing_list = t_packing_list
contents_bin = t_attachment
* CONTENTS_HEX = t_attachment
contents_txt = it_message
receivers = t_receivers
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
IF sy-subrc = 0.
PERFORM update_infotype_0019 .
ENDIF.
* Populate zerror return code
* ld_error = sy-subrc.
** stop .
* READ TABLE t_receivers WITH KEY retrn_code = '0' .
* IF sy-subrc = 0 .
* v_update_flag = '1' .
* EXPORT v_update_flag TO MEMORY ID 'MEM2' .
* ENDIF .
** Populate zreceiver return code
* LOOP AT t_receivers.
* ld_receiver = t_receivers-retrn_code.
* ENDLOOP.
ENDFORM. "send_file_as_email_attachment
*& Form GET_NEXT_MONTH
FORM get_next_month .
CLEAR v_month .
v_month = vl_nmth+4(2).
REFRESH it_t247 .
CLEAR it_t247 .
CALL FUNCTION 'IDWT_READ_MONTH_TEXT'
EXPORTING
langu = 'E'
month = v_month
IMPORTING
t247 = it_t247.
CLEAR v_mon_text .
v_mon_text = it_t247-ltx .
ENDFORM. " GET_NEXT_MONTH
Edited by: Katie Doody on Feb 24, 2010 12:30 AMThank you for your response, this has allowed me to identify the problem. It is when I create the spool by using the code below. If I add a wait after this, the program works successfully. Is there another way to write the data to create a spool within my initial program rather than doing the submit? Could it be that it is putting data in memory?
SUBMIT zhr_pm_appandprogemail TO SAP-SPOOL WITHOUT SPOOL DYNPRO
SPOOL PARAMETERS mstr_print_parms
VIA SELECTION-SCREEN AND RETURN.
*& Report ZHR_PM_APPANDPROGEMAIL
REPORT ZHR_PM_APPANDPROGEMAIL
NO STANDARD PAGE HEADING
LINE-SIZE 80
LINE-COUNT 65(8).
* MESSAGE-ID zhr.
* INTERNAL TABLES DECLARATION
DATA: it_pdf TYPE tline OCCURS 0 ." WITH HEADER LINE .
* WORK AEA DECLARATION
DATA: wa_pdf TYPE tline .
* Spool to PDF conversions
*DATA: "gd_spool_nr TYPE tsp01-rqident,
* gd_destination TYPE rlgrap-filename,
* gd_bytecount TYPE tst01-dsize,
DATA:v_update_flag TYPE c . "flag for updating infotype 41 last appraisal date
DATA: v_gd_buffer TYPE string.
DATA: BEGIN OF it_final1 OCCURS 0 ,
supervisor TYPE persno ,
pernr TYPE persno ,
ename TYPE pa0001-ename ,
subgroup TYPE persk ,
stext TYPE t503t-ptext ,
lastapp TYPE dats ,
lastjob TYPE dats ,
email TYPE ztype,
darxx(5) TYPE c,
progression(1) TYPE c,
supervisor_desc(50) TYPE c,
END OF it_final1 .
DATA: t_packing_list TYPE sopcklsti1 OCCURS 0 WITH HEADER LINE,
t_contents TYPE solisti1 OCCURS 0 WITH HEADER LINE,
t_receivers TYPE somlreci1 OCCURS 0 WITH HEADER LINE,
t_attachment TYPE solisti1 OCCURS 0 WITH HEADER LINE,
t_object_header TYPE solisti1 OCCURS 0 WITH HEADER LINE,
w_cnt TYPE i,
w_sent_all(1) TYPE c,
w_doc_data TYPE sodocchgi1 .
DATA: gd_error TYPE sy-subrc,
gd_reciever TYPE sy-subrc.
DATA: v_flag TYPE c VALUE '1' .
DATA: BEGIN OF it_final OCCURS 0 ,
subgroup TYPE persk ,
supervisor TYPE persno ,
pernr TYPE persno ,
ename TYPE pa0001-ename ,
stext TYPE t503t-ptext ,
lastapp TYPE dats ,
lastjob TYPE dats ,
email TYPE ztype,
progression(1) TYPE c,
supervisor_desc(50) TYPE c,
END OF it_final .
DATA:it_t247 TYPE STANDARD TABLE OF t247 WITH HEADER LINE .
DATA: it_email TYPE STANDARD TABLE OF zemail WITH HEADER LINE.
*VARIABLE DECLARATION
DATA: p_date TYPE sy-datum , "excution date
vl_date TYPE sy-datum ,
p_email1 TYPE somlreci1-receiver , "receiver
p_sender TYPE somlreci1-receiver . "sender
DATA: w_recsize TYPE i.
DATA: gd_recsize TYPE i.
DATA : vl_nmth TYPE sy-datum.
DATA: v_month(2) TYPE n .
DATA: v_mon_text TYPE t247-ltx .
*START OF SELECTION
START-OF-SELECTION .
REFRESH t_receivers.
IMPORT it_final1 it_email p_email1 p_sender p_date vl_nmth FROM MEMORY ID 'MEM'.
PERFORM get_next_month .
LOOP AT it_final1 .
IF it_final1-progression IS NOT INITIAL.
MOVE-CORRESPONDING it_final1 TO it_final .
APPEND it_final .
CLEAR it_final .
* Add the recipients email address
t_receivers-receiver = it_final1-email.
t_receivers-rec_type = 'U'.
t_receivers-com_type = 'INT'.
t_receivers-notif_del = 'X'.
t_receivers-notif_ndel = 'X'.
APPEND t_receivers.
ENDIF.
ENDLOOP .
PERFORM write_output .
*END OF SELECTION
END-OF-SELECTION .
*& Form WRITE_OUTPUT
FORM write_output .
DATA: l_date(14) TYPE c ,
l_date_temp(14) TYPE c ,
v_date(10) TYPE c ,
v_date1(20) TYPE c ,
v_date1_temp(20) TYPE c ,
f_date(10) TYPE c.
DATA: lv_stext TYPE t503t-ptext .
CLEAR : v_date, v_date1.
CONCATENATE p_date+4(02) p_date+6(02) p_date+0(04)'.' INTO v_date.
CONCATENATE v_mon_text p_date+0(4) INTO l_date_temp SEPARATED BY space.
CONCATENATE l_date_temp '.' INTO l_date.
CONCATENATE v_mon_text vl_nmth+6(2) INTO v_date1_temp SEPARATED BY space.
CONCATENATE v_date1_temp ',' INTO v_date1_temp.
CONCATENATE v_date1_temp vl_nmth(4) INTO v_date1_temp SEPARATED BY space.
CONCATENATE v_date1_temp '.' INTO v_date1.
CONDENSE l_date .
FORMAT INTENSIFIED ON.
SKIP 4.
WRITE:/(80) text-001 CENTERED . "'METROPOLITAN UTILITIES DISTRICT'.
WRITE:/(80) text-002 CENTERED . "'OMAHA NEBR.'.
SKIP 2.
WRITE:/(80) text-003 CENTERED . "'Inter-Departmental Communication'.
FORMAT INTENSIFIED OFF.
WRITE :/(80) v_date CENTERED using edit mask '__/__/____'. " v_date.
SKIP 2.
WRITE: /10 text-004. "'SUBJECT: Performance Appraisals and Progression Increase'.
SKIP 1.
WRITE: /10 text-005, it_final1-supervisor_desc. "'TO: Supervisor'.
SKIP 1.
WRITE: /10 text-006. "'FROM: Anne M. Undajon, Director of Compensation and Benefits'.
SKIP 2.
WRITE:/10 text-007 . "'Listed below are the employees in your area who are due a '.
WRITE:/10 text-008 ,l_date. "'Performance Appraisal during the month of ',l_date.'. "v_mon_text , P_date+0(4)
WRITE:/10 text-009 . "'These employees are also eligible for a progression increase.
WRITE:/10 text-010 . "' A performance appraisal form can be found on-line in the MUD '.
WRITE:/10 text-011 . "'template section. The Performance Appraisal is to be completed '
WRITE:/10 text-012 . "'and discussed with the employee by the immediate supervisor.'
SKIP 2.
WRITE:/10 text-013. "Signed forms should be returned to the Human Resource Department by '.
WRITE:/10 v_date1.
SKIP 2 .
SORT it_final[] BY subgroup .
LOOP AT it_final .
CLEAR: lv_stext .
lv_stext = it_final-stext.
AT NEW subgroup .
TRANSLATE lv_stext TO UPPER CASE .
WRITE:/(80) lv_stext CENTERED .
SKIP 2 .
WRITE: 10 text-014 . "'Employee name' .
WRITE: 32 text-015 . "'Job Date' .
WRITE :44 text-016 . "'Last Appraisal' .
WRITE :59 text-021 . "'Employee' .
WRITE :/10 '--------------------' , 32'----------', 44 '--------------', 59 '--------'.
ENDAT .
WRITE:/10 it_final-ename .
WRITE: 32 it_final-lastjob using edit mask '__/__/____'.
CONCATENATE it_final-lastapp+4(02) it_final-lastapp+6(02) it_final-lastapp+0(04) INTO f_date.
WRITE :44 f_date using edit mask '__/__/____'.
SHIFT it_final-pernr left deleting leading '0'.
WRITE : 59 it_final-pernr.
SKIP 2 .
ENDLOOP.
SKIP 4.
WRITE :10 text-017. "'Anne M. Undajon'.
FORMAT INTENSIFIED ON.
WRITE:/10 text-018. "'Director of Compensation & Benefits'.
FORMAT INTENSIFIED OFF.
ENDFORM. " WRITE_OUTPUT
*& Form GET_NEXT_MONTH
FORM get_next_month .
CLEAR v_month .
v_month = vl_nmth+4(2).
REFRESH it_t247 .
CLEAR it_t247 .
CALL FUNCTION 'IDWT_READ_MONTH_TEXT'
EXPORTING
langu = 'E'
month = v_month
IMPORTING
t247 = it_t247.
CLEAR v_mon_text .
v_mon_text = it_t247-ltx .
ENDFORM. " GET_NEXT_MONTH
Edited by: Katie Doody on Feb 24, 2010 4:07 PM -
How to send an Email Message along with a PO PDF Attachment in Word.
I want to send an Email to a customer. The subject of the email is the PDF attachment of the Purchase order.
Then in the Body of the email, we need to put a small Mesasge in the Body of the Email: Example
Hello,
Please see attached Purchase Order.
thank you...
Does anyone have a suggestion on how to do this? Best approach?
thanks
Walter PoeHi Walter,
In NACE transaction, select Application EF , then select your P.O Message ( standard is NEU ) .
Then in "processing routing" parts check that there is an entry for medium 5 ( external send ) , if not please set it with corresponding print program, from routine and forms to use .
Then in "Mail Title and Text" parts you can define your mail title with variable and your mail body . Please find below a sample for this. To define the mail body just click on the icon for text ( it's like sapscript text ).
Mail Title : "Your P.O &EKKO-EBELN"
Mail Body : "Please find enclosed our P.O &EKKO-EBELN....."
That's all for NACE parts.
After this you have to define thru condition that the medium will be used for each P.O. For this check with functionnal consultant if everything is ok and the same that for medium 1.
Then when you create a P.O, SAP will generate a mail with supplier e-mail adress define in his masterdata . The forms will be converted according to your customizing in transaction SCOT ( node SMTP , Support address type parts) .
Of course you also have to define a job for sending the mail .
Hope this help you
Regards
Bertrand -
i have a function which returns purchase orders list.
in my program i want my program sends the purchase order document through email in pdf format when i select an order from the list.
how can i do that.This reference program might help:
http://www.sapdevelopment.co.uk/reporting/rep_spooltopdf.htm
Maybe you are looking for
-
Need help with floating div's and clear property
Link to page Link to CSS file I have the website currently setup as a 3 column website and everything is working fine. I need to make some pages as a 2 column page with the left column having several "leftcolumn" div's stacked on top of each other s
-
All files saved as html doc will save as firefox html doc which keeps me from opening this file in any other browser. This happens no matter which text editor I use. How do I save html docs without the firefox logo.
-
Help, I can't set my own password
Hello all, I just did an erase and install of Tiger. After it installed it would not give me the setup assistant because it said "my monitor did not support it". (I think it's because I erased my monitor driver.) So I went and found the profile for m
-
Dear Mr Adobe, I like Lightroom very much, So much that I play with it all day long, Your software and my hardware, Swing together like king and kong There are however a few small problems, with our swinging relationship, You see I need dual-screen s
-
Hardware requirement for sap system.
Hello All, i want to install SAP on my local home PC. Kindly let me know the hardware requirment for this. So that i can