ALV title text MISSING
Hi experts,
I have an ALV report with a text with a lenght of 31 characters.
On the ALV report, it appears only 20 characters.
Here's the code:
clear wa_fieldcat.
wa_fieldcat-fieldname = 'DOMVALUE'.
wa_fieldcat-tabname = 'GT_OUTPUT'.
wa_fieldcat-seltext_m = 'Privative area - (US$/M2) - VP'.
append wa_fieldcat to tg_fieldcat.
Hi,
You're using this fieldcat on your code:
wa_fieldcat-seltext_m = 'Privative area - (US$/M2) - VP'.
Try using wa_fieldcat-seltext_l. The seltext_m only has 20-char lenght, and seltext_l has 40 chars.
Hope it helps,
Grasieli Cavalheiro Marchetti
Similar Messages
-
ALV GRID - Text for Grand Total
Hi guys,
In ALV Grid, i need to display the Text 'GRAND TOTAL' at the left side of the row(Yellow line).
I have tried searching in the forum but didn't get the answer.
Please advice.
Thanks
ChintuHi
<br><br>
IF you copy and past this might not work but this is the sample code<br><br>
<pre>
REPORT Y_DOWN_TIME_ENTRYSRA.
TABLES : YDOWNTIME1.
TYPE-POOLS : SLIS.
*INTERNAL TABLE DECLARTION
data : l_layout type slis_layout_alv,
x_events type slis_alv_event,
it_events type slis_t_event.
DATA :ITAB LIKE YDOWNTIME1 OCCURS 0 WITH HEADER LINE .
data : GT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
wa_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV.
**********************SELECTION PARAMETERS ************************
PARAMETERS: CB1 RADIOBUTTON GROUP G1 ,
CB2 RADIOBUTTON GROUP G1 ,
cb3 RADIOBUTTON GROUP G1 ,
CB4 RADIOBUTTON GROUP G1 ,
CB5 RADIOBUTTON GROUP G1 ,
CB6 RADIOBUTTON GROUP G1 ,
CB7 RADIOBUTTON GROUP G1 ,
CB8 RADIOBUTTON GROUP G1 ,
CB9 RADIOBUTTON GROUP G1 .
CB10 RADIOBUTTON GROUP G1,
CB11 RADIOBUTTON GROUP G1.
DATA : A TYPE C.
SELECTION-SCREEN BEGIN OF BLOCK BK1 WITH FRAME TITLE TEXT-001.
SELECT-OPTIONS :S_EQUNR FOR YDOWNTIME1-EQUNR ,
S_ERDop FOR YDOWNTIME1-ERDAT,
S_MFSTT FOR YDOWNTIME1-MFSTART.
PARAMETERS : P_SHIFT TYPE YDOWNTIME1-SHIFT,
P_CHARG TYPE YDOWNTIME1-CHARG,
p_COGRU TYPE YDOWNTIME1-QMGRP,
P_CODE TYPE YDOWNTIME1-COde,
p_name type ydowntime1-OPNAME,
p_sup TYPE YDOWNTIME1-SUPERVISOR,
P_MANG TYPE YDOWNTIME1-MANG.
SELECTION-SCREEN END OF BLOCK BK1 .
AT SELECTION-SCREEN.
IF CB1 EQ 'X'.
select * from YDOWNTIME1
INTO CORRESPONDING FIELDS OF TABLE ITAB
where erdat in S_ERDop .
ELSEIF CB2 EQ 'X' .
select * from YDOWNTIME1
INTO CORRESPONDING FIELDS OF TABLE ITAB
where erdat in S_ERDop and charg eq p_charg .
ELSEIF CB3 EQ 'X' .
select * from YDOWNTIME1
INTO CORRESPONDING FIELDS OF TABLE ITAB
where erdat in S_ERDop and charg eq p_charg and shift eq P_SHIFT .
ELSEIF CB4 EQ 'X' .
select * from YDOWNTIME1
INTO CORRESPONDING FIELDS OF TABLE ITAB
where code eq p_code and erdat in S_ERDop.
ELSEIF CB5 EQ 'X' .
select * from YDOWNTIME1
INTO CORRESPONDING FIELDS OF TABLE ITAB
where erdat in S_ERDop and EQUNR in S_EQUNR and QMGRP eq p_COGRU.
ELSEIF CB6 EQ 'X' .
select * from YDOWNTIME1
INTO CORRESPONDING FIELDS OF TABLE ITAB
where OPNAME eq p_name and erdat in S_ERDop.
ELSEIF CB7 EQ 'X' .
select * from YDOWNTIME1
INTO CORRESPONDING FIELDS OF TABLE ITAB
where SUPERVISOR eq p_sup and erdat in S_ERDop.
ELSEIF CB8 EQ 'X' .
select * from YDOWNTIME1
INTO CORRESPONDING FIELDS OF TABLE ITAB
where MANG eq p_MANG and erdat in S_ERDop.
ELSEIF CB9 EQ 'X'.
select * from YDOWNTIME1
INTO CORRESPONDING FIELDS OF TABLE ITAB
where erdat in S_ERDop and EQUNR in S_EQUNR.
endif.
loop at itab.
if itab-schno > 1.
A = ' '.
move A to itab-DCOR .
move A to itab-DCCR .
move A to itab-DCNR .
modify itab.
endif.
endloop.
perform create_fieldcat.
data: sort type slis_sortinfo_alv,
it_sort type SLIS_T_SORTINFO_ALV.
sort-fieldname = 'EQUNR'.
sort-up = 'X'.
sort-subtot = 'X'.
APPEND sort to it_sort.
sort-fieldname = 'SHIFT'.
sort-up = 'X'.
*sort-subtot = 'X'.
APPEND sort to it_sort.
l_layout-TOTALS_TEXT = 'TOTAL'.
l_layout-SUBTOTALS_TEXT = 'SUBTOTAL'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = sy-repid
is_layout = l_layout
it_fieldcat = gt_fieldcat
it_events = it_events
it_sort = it_sort
TABLES
T_OUTTAB = ITAB
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*& Form CREATE_FIELDCAT
text
--> p1 text
<-- p2 text
FORM CREATE_FIELDCAT .
DATA: LS_FIELDCAT TYPE SLIS_FIELDCAT_ALV.
CLEAR LS_FIELDCAT.
LS_FIELDCAT-ROW_POS = '1'.
LS_FIELDCAT-COL_POS = '1'.
LS_FIELDCAT-FIELDNAME = 'ERDAT'.
LS_FIELDCAT-KEY = ''.
LS_FIELDCAT-OUTPUTLEN = '12'.
ls_fieldcat-do_sum = 'X'.
LS_FIELDCAT-SELTEXT_L = 'Date'.
APPEND LS_FIELDCAT TO GT_FIELDCAT.
clear LS_FIELDCAT .
CLEAR LS_FIELDCAT.
LS_FIELDCAT-ROW_POS = '1'.
LS_FIELDCAT-COL_POS = '2'.
LS_FIELDCAT-FIELDNAME = 'UZEIT'.
LS_FIELDCAT-KEY = ''.
LS_FIELDCAT-OUTPUTLEN = '8'.
LS_FIELDCAT-SELTEXT_L = 'Time'.
APPEND LS_FIELDCAT TO GT_FIELDCAT.
clear LS_FIELDCAT .
CLEAR LS_FIELDCAT.
LS_FIELDCAT-ROW_POS = '1'.
LS_FIELDCAT-COL_POS = '2'.
LS_FIELDCAT-FIELDNAME = 'EQUNR'.
LS_FIELDCAT-KEY = ''.
LS_FIELDCAT-OUTPUTLEN = '8'.
LS_FIELDCAT-SELTEXT_L = 'Equipment'.
APPEND LS_FIELDCAT TO GT_FIELDCAT.
clear LS_FIELDCAT .
CLEAR LS_FIELDCAT.
LS_FIELDCAT-ROW_POS = '1'.
LS_FIELDCAT-COL_POS = '2'.
LS_FIELDCAT-FIELDNAME = 'CODE'.
LS_FIELDCAT-KEY = ''.
LS_FIELDCAT-OUTPUTLEN = '12'.
LS_FIELDCAT-SELTEXT_L = 'CODE'.
APPEND LS_FIELDCAT TO GT_FIELDCAT.
clear LS_FIELDCAT .
CLEAR LS_FIELDCAT.
LS_FIELDCAT-ROW_POS = '1'.
LS_FIELDCAT-COL_POS = '3'.
LS_FIELDCAT-FIELDNAME = 'QMGRP'.
LS_FIELDCAT-KEY = ''.
LS_FIELDCAT-OUTPUTLEN = '20'.
LS_FIELDCAT-SELTEXT_L = 'Code Group'.
APPEND LS_FIELDCAT TO GT_FIELDCAT.
clear LS_FIELDCAT .
CLEAR LS_FIELDCAT.
LS_FIELDCAT-ROW_POS = '1'.
LS_FIELDCAT-COL_POS = '3'.
LS_FIELDCAT-FIELDNAME = 'KURZTEXT'.
LS_FIELDCAT-KEY = ''.
LS_FIELDCAT-OUTPUTLEN = '40'.
LS_FIELDCAT-SELTEXT_L = 'Code Text'.
APPEND LS_FIELDCAT TO GT_FIELDCAT.
clear LS_FIELDCAT .
CLEAR LS_FIELDCAT.
LS_FIELDCAT-ROW_POS = '1'.
LS_FIELDCAT-COL_POS = '7'.
LS_FIELDCAT-FIELDNAME = 'DCOR'.
LS_FIELDCAT-KEY = ''.
LS_FIELDCAT-OUTPUTLEN = '14'.
LS_FIELDCAT-SELTEXT_L = 'Opening Dips'.
APPEND LS_FIELDCAT TO GT_FIELDCAT.
clear LS_FIELDCAT .
CLEAR LS_FIELDCAT.
LS_FIELDCAT-ROW_POS = '1'.
LS_FIELDCAT-COL_POS = '8'.
LS_FIELDCAT-FIELDNAME = 'DCCR'.
LS_FIELDCAT-KEY = ''.
LS_FIELDCAT-OUTPUTLEN = '14'.
LS_FIELDCAT-SELTEXT_L = 'Closing Dips'.
APPEND LS_FIELDCAT TO GT_FIELDCAT.
clear LS_FIELDCAT .
CLEAR LS_FIELDCAT.
LS_FIELDCAT-ROW_POS = '1'.
LS_FIELDCAT-COL_POS = '9'.
LS_FIELDCAT-FIELDNAME = 'DCNR'.
LS_FIELDCAT-KEY = ''.
LS_FIELDCAT-OUTPUTLEN = '10'.
ls_fieldcat-do_sum = 'X'.
LS_FIELDCAT-SELTEXT_L = 'Net Dips'.
APPEND LS_FIELDCAT TO GT_FIELDCAT.
clear LS_FIELDCAT .
CLEAR LS_FIELDCAT.
LS_FIELDCAT-ROW_POS = '1'.
LS_FIELDCAT-COL_POS = '9'.
LS_FIELDCAT-FIELDNAME = 'PRO'.
LS_FIELDCAT-KEY = ''.
LS_FIELDCAT-OUTPUTLEN = '10'.
ls_fieldcat-do_sum = 'X'.
LS_FIELDCAT-SELTEXT_L = 'PROD IN LAC'.
APPEND LS_FIELDCAT TO GT_FIELDCAT.
clear LS_FIELDCAT .
CLEAR LS_FIELDCAT.
LS_FIELDCAT-ROW_POS = '1'.
LS_FIELDCAT-COL_POS = '4'.
LS_FIELDCAT-FIELDNAME = 'CHARG'.
LS_FIELDCAT-KEY = ''.
LS_FIELDCAT-OUTPUTLEN = '12'.
ls_fieldcat-do_sum = 'X'.
LS_FIELDCAT-SELTEXT_L = 'Batch Number'.
APPEND LS_FIELDCAT TO GT_FIELDCAT.
clear LS_FIELDCAT .
CLEAR LS_FIELDCAT.
LS_FIELDCAT-ROW_POS = '1'.
LS_FIELDCAT-COL_POS = '6'.
LS_FIELDCAT-FIELDNAME = 'OPNAME'.
LS_FIELDCAT-KEY = ''.
LS_FIELDCAT-OUTPUTLEN = '20'.
LS_FIELDCAT-SELTEXT_L = 'Operators Name'.
APPEND LS_FIELDCAT TO GT_FIELDCAT.
clear LS_FIELDCAT .
CLEAR LS_FIELDCAT.
LS_FIELDCAT-ROW_POS = '1'.
LS_FIELDCAT-COL_POS = '6'.
LS_FIELDCAT-FIELDNAME = 'SUPERVISOR'.
LS_FIELDCAT-KEY = ''.
LS_FIELDCAT-OUTPUTLEN = '20'.
LS_FIELDCAT-SELTEXT_L = 'Supervisor Name'.
APPEND LS_FIELDCAT TO GT_FIELDCAT.
clear LS_FIELDCAT .
CLEAR LS_FIELDCAT.
LS_FIELDCAT-ROW_POS = '1'.
LS_FIELDCAT-COL_POS = '6'.
LS_FIELDCAT-FIELDNAME = 'MANG'.
LS_FIELDCAT-KEY = ''.
LS_FIELDCAT-OUTPUTLEN = '20'.
LS_FIELDCAT-SELTEXT_L = 'Manager'.
APPEND LS_FIELDCAT TO GT_FIELDCAT.
clear LS_FIELDCAT .
CLEAR LS_FIELDCAT.
LS_FIELDCAT-ROW_POS = '1'.
LS_FIELDCAT-COL_POS = '6'.
LS_FIELDCAT-FIELDNAME = 'SHIFT'.
LS_FIELDCAT-KEY = ''.
LS_FIELDCAT-OUTPUTLEN = '20'.
LS_FIELDCAT-SELTEXT_L = 'Shift'.
APPEND LS_FIELDCAT TO GT_FIELDCAT.
clear LS_FIELDCAT .
CLEAR LS_FIELDCAT.
LS_FIELDCAT-ROW_POS = '1'.
LS_FIELDCAT-COL_POS = '9'.
LS_FIELDCAT-FIELDNAME = 'MFSTART'.
LS_FIELDCAT-KEY = ''.
LS_FIELDCAT-OUTPUTLEN = '10'.
LS_FIELDCAT-SELTEXT_L = 'Start Time'.
APPEND LS_FIELDCAT TO GT_FIELDCAT.
clear LS_FIELDCAT .
CLEAR LS_FIELDCAT.
LS_FIELDCAT-ROW_POS = '1'.
LS_FIELDCAT-COL_POS = '9'.
LS_FIELDCAT-FIELDNAME = 'MFEND'.
LS_FIELDCAT-KEY = ''.
LS_FIELDCAT-OUTPUTLEN = '10'.
LS_FIELDCAT-SELTEXT_L = 'End Time'.
APPEND LS_FIELDCAT TO GT_FIELDCAT.
clear LS_FIELDCAT .
CLEAR LS_FIELDCAT.
LS_FIELDCAT-ROW_POS = '1'.
LS_FIELDCAT-COL_POS = '9'.
LS_FIELDCAT-FIELDNAME = 'DURATION'.
LS_FIELDCAT-KEY = ''.
LS_FIELDCAT-OUTPUTLEN = '10'.
ls_fieldcat-do_sum = 'X'.
LS_FIELDCAT-SELTEXT_L = 'DURATION'.
APPEND LS_FIELDCAT TO GT_FIELDCAT.
clear LS_FIELDCAT .
CLEAR LS_FIELDCAT.
LS_FIELDCAT-ROW_POS = '1'.
LS_FIELDCAT-COL_POS = '9'.
LS_FIELDCAT-FIELDNAME = 'ZUNIT'.
LS_FIELDCAT-KEY = ''.
LS_FIELDCAT-OUTPUTLEN = '10'.
LS_FIELDCAT-SELTEXT_L = 'UNIT'.
APPEND LS_FIELDCAT TO GT_FIELDCAT.
clear LS_FIELDCAT .
ENDFORM. " CREATE_FIELDCAT
</pre>
Edited by: Matt on Sep 3, 2009 12:06 PM -
hai
i done alv report with total and subtotal , but the text for the total and subtotal
which iam specified in layout are not displayed in a report.
plz help me..hi,
*& Report Z_REPT_ALV_EX1 *
report ZALV_GEN line-count 36(5)
line-size 225
no standard page heading.
Report name: Puchase Order Report for ALV practice *
Program ID : Z_REPT_ALV_EX1_TG *
Author : ADCDEV ( T G Santosh ) *
Date : Sep 09, 2004 *
*..Type Definitions for ALV Report
type-pools slis.
Tables Declaration
tables : lfa1,
lfb1,
lfm1.
Data Declaration
data : v_lifnr like lfa1-lifnr,
v_bukrs like lfb1-bukrs,
v_ekorg like lfm1-ekorg,
v_ktokk like lfa1-ktokk,
v_repid like sy-repid.
Internal Tables
data : begin of it_details occurs 0,
lifnr like lfa1-lifnr,
bukrs like lfb1-bukrs,
ekorg like lfm1-ekorg,
ktokk like lfa1-ktokk,
name1 like lfa1-name1,
stras like lfa1-stras,
ragio like lfa1-regio,
pfach like lfa1-pfach,
pstl2 like lfa1-pstl2,
pstlz like lfa1-pstlz,
telf1 like lfa1-telf1,
end of it_details.
data: it_fieldcatalog type slis_t_fieldcat_alv,
it_fieldcatalog1 type slis_t_fieldcat_alv,
wa_fieldcatalog type slis_fieldcat_alv,
wa_layout type slis_layout_alv,
it_events type slis_t_event,
wa_events type slis_alv_event,
it_sort type slis_t_sortinfo_alv,
wa_sort type slis_sortinfo_alv occurs 0 with header line.
Initialization
v_repid = sy-repid.
Selecton Screen
selection-screen begin of block blk1 with frame title text-001.
select-options : s_lifnr for lfa1-lifnr,
s_bukrs for lfb1-bukrs,
s_ekorg for lfm1-ekorg,
s_ktokk for lfa1-ktokk.
selection-screen end of block blk1.
selection-screen begin of block blk2 with frame title text-002.
parameter : block radiobutton group g1,
grid radiobutton group g1.
selection-screen end of block blk2.
At Selecton Screen
select single lifnr
from lfa1
into v_lifnr
where lifnr in s_lifnr.
if sy-subrc <> 0.
message i101(zsantosh) with 'v_lifnr' .
write : 'not a valid number', v_lifnr.
else.
select single bukrs
from lfb1
into v_bukrs
where bukrs in s_bukrs.
if sy-subrc <> 0.
message i101(zsantosh) with 'Company Code'.
else.
select single ekorg
from lfm1
into v_ekorg
where ekorg in s_ekorg.
if sy-subrc <> 0.
message i101(zsantosh) with 'Purchasing Organisation'.
else.
select single ktokk
from lfa1
into v_ktokk
where ktokk in s_ktokk.
if sy-subrc <> 0.
message i101(zsantosh) with 'Vendor Group'.
endif.
endif.
endif.
endif.
Start of Selection
start-of-selection.
select a1~lifnr
b1~bukrs
m1~ekorg
a1~ktokk
a1~name1
a1~stras
a1~regio
a1~pfach
a1~pstl2
a1~pstlz
a1~telf1
into table it_details
from lfa1 as a1
join lfb1 as b1 on a1lifnr = b1lifnr
join lfm1 as m1 on a1lifnr = m1lifnr
where a1~lifnr in s_lifnr and
b1~bukrs in s_bukrs and
m1~ekorg in s_ekorg and
a1~ktokk in s_ktokk.
clear wa_sort.
wa_sort-spos = 1.
wa_sort-fieldname = 'LIFNR'.
wa_sort-tabname = 'IT_DETAILS'.
wa_sort-up = 'X'.
append wa_sort to it_sort.
clear wa_sort.
wa_sort-spos = 2.
wa_sort-fieldname = 'BUKRS'.
wa_sort-tabname = 'IT_DETAILS'.
wa_sort-up = 'X'.
append wa_sort to it_sort.
clear wa_sort.
wa_sort-spos = 3.
wa_sort-fieldname = 'EKORG'.
wa_sort-tabname = 'IT_DETAILS'.
wa_sort-up = 'X'.
append wa_sort to it_sort.
End of selection
end-of-selection.
perform fill_fieldcat.
loop at it_fieldcatalog into wa_fieldcatalog.
if wa_fieldcatalog-fieldname = 'RAGIO'.
wa_fieldcatalog-intlen = 2.
wa_fieldcatalog-ref_fieldname = ''.
wa_fieldcatalog-ref_tabname = ''.
wa_fieldcatalog-ddic_outputlen = 2.
endif.
wa_fieldcatalog-ref_fieldname = ''.
wa_fieldcatalog-ref_tabname = ''.
modify it_fieldcatalog from wa_fieldcatalog.
endloop.
perform fill_layout.
if block = 'X'.
perform list_block_display.
elseif grid = 'X'.
perform list_grid_display.
endif.
*& Form FILL_FIELDCAT
text
--> p1 text
<-- p2 text
form fill_fieldcat .
call function 'REUSE_ALV_FIELDCATALOG_MERGE'
exporting
i_program_name = v_repid
i_internal_tabname = 'IT_DETAILS'
I_STRUCTURE_NAME =
I_CLIENT_NEVER_DISPLAY = 'X'
i_inclname = v_repid
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE =
changing
ct_fieldcat = it_fieldcatalog
exceptions
inconsistent_interface = 1
program_error = 2
others = 3
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endform. " FILL_FIELDCAT
*& Form FILL_LAYOUT
text
--> p1 text
<-- p2 text
form fill_layout .
wa_layout-zebra = 'X'.
wa_layout-totals_text = 'TOTAL'.
wa_layout-colwidth_optimize = 'X'.
endform. " FILL_LAYOUT
*& Form list_block_display
text
--> p1 text
<-- p2 text
form list_block_display .
call function 'REUSE_ALV_BLOCK_LIST_INIT'
exporting
i_callback_program = v_repid
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = ' '
IT_EXCLUDING =
call function 'REUSE_ALV_BLOCK_LIST_APPEND'
exporting
is_layout = wa_layout
it_fieldcat = it_fieldcatalog
i_tabname = 'IT_DETAILS'
it_events = it_events
it_sort = it_sort
I_TEXT = ' '
tables
t_outtab = it_details
exceptions
program_error = 1
maximum_of_appends_reached = 2
others = 3
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call function 'REUSE_ALV_BLOCK_LIST_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
IS_PRINT =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
exceptions
program_error = 1
others = 2
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endform. " list_block_display
*& Form LIST_GRID_DISPLAY
text
--> p1 text
<-- p2 text
form list_grid_display .
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER = ' '
I_BUFFER_ACTIVE = ' '
i_callback_program = v_repid
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = ' '
I_CALLBACK_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
i_structure_name = 'IT_DETAILS'
I_BACKGROUND_ID = ' '
i_grid_title = 'DETAILS IN GRID DISPLAY'
I_GRID_SETTINGS =
is_layout = wa_layout
it_fieldcat = it_fieldcatalog
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
it_sort = it_sort
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
IT_EVENTS =
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IT_ALV_GRAPHICS =
IT_HYPERLINK =
IT_ADD_FIELDCAT =
IT_EXCEPT_QINFO =
I_HTML_HEIGHT_TOP =
I_HTML_HEIGHT_END =
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
tables
t_outtab = it_details
exceptions
program_error = 1
others = 2
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
endform. " LIST_GRID_DISPLAY
regards,
deepthi reddy -
Hello Experts,
Please suggest how to generate dynamic ALV title for dynamic alv output.
Scenario: My ALV output is dynamic based on custom table. We have maintained 10 fields in custom table. In selection screen one of the parameter is number.
If i enter 2 or more than 2 accordingly my fieldcatlog will be prepared with same fields. But it will be mulitiple based on selection screen.
I have achieved till this part, now i need to generate title for each set of 10 columns.
Best example:
ALV output:
Title 1 Title2 Title3
A B C D E F G H I J | A B C D E F G H I J | A B C D E F G H I J |
I hope you all understand my problem and i appreciate your answers....
Thanks
CrisDear,
Use the below report code to print your dynamic coloumn in alv grid.
below just go through the use of variable w_bom for text,u will use single varible w_bom but clear it b4
printing it again. on the conditional base header will come in w_bom and print in fieldcatalog.
operate all operation b4 putting the text in fieldcatalog.
jus go through the code and you may ask any clarificaiton regarading that.
loop at i_fldcat into x_fldcat WHERE
fieldname = 'IDNRK' or
fieldname = 'MAKTX' or
fieldname = 'MEINS' or
FIELDNAME = 'MENGE1' OR
FIELDNAME = 'MENGE2' OR
FIELDNAME = 'MENGE3' OR
FIELDNAME = 'MENGE4' OR
FIELDNAME = 'MENGE5' OR
FIELDNAME = 'MENGE6' OR
FIELDNAME = 'MENGE7' OR
FIELDNAME = 'MENGE8'.
if stlal-low ne ''.
if x_fldcat-fieldname = 'IDNRK'.
x_fldcat-seltext_l = 'Component'.
x_fldcat-outputlen = 25.
x_fldcat-reptext_ddic = 'Component'.
x_fldcat-inttype = c_c.
endif.
if x_fldcat-fieldname = 'MAKTX'.
x_fldcat-seltext_l = 'Component Description'.
x_fldcat-outputlen = 25.
x_fldcat-reptext_ddic = 'Component Description'.
x_fldcat-inttype = c_c.
endif.
if x_fldcat-fieldname = 'MEINS'.
x_fldcat-seltext_l = 'UOM'.
x_fldcat-reptext_ddic = 'UOM'.
x_fldcat-ddictxt = c_l.
endif.
CLEAR W_BOM.
if x_fldcat-fieldname = 'MENGE1'.
read table t_stas1 with key stlal = '01'.
if sy-subrc NE 0.
x_fldcat-no_out = 'X'.
X_FLDCAT-TECH = 'X'.
ELSE.
PERFORM VAR_BOM USING T_STAS1-STLAL.
CONCATENATE '' T_BOM-STKTX INTO W_BOM separated BY SPACE.
IF T_BOM-STLST = '1'.
X_FLDCAT-EMPHASIZE = 'C511'.
ENDIF.
x_fldcat-seltext_l = W_BOM.
x_fldcat-reptext_ddic = W_BOM.
x_fldcat-ddictxt = c_l.
endif.
ENDIF.
CLEAR W_BOM.
if x_fldcat-fieldname = 'MENGE2'.
read table t_stas1 with key stlal = '02'.
if sy-subrc NE 0.
x_fldcat-no_out = 'X'.
ELSE.
PERFORM VAR_BOM USING T_STAS1-STLAL.
CONCATENATE '' T_BOM-STKTX INTO W_BOM separated BY SPACE.
IF T_BOM-STLST = '1'.
X_FLDCAT-EMPHASIZE = 'C511'.
ENDIF.
x_fldcat-seltext_l = W_BOM.
x_fldcat-reptext_ddic = W_BOM.
x_fldcat-ddictxt = c_l.
endif.
ENDIF.
CLEAR W_BOM.
if x_fldcat-fieldname = 'MENGE3'.
read table t_stas1 with key stlal = '03'.
if sy-subrc NE 0.
x_fldcat-no_out = 'X'.
ELSE.
PERFORM VAR_BOM USING T_STAS1-STLAL.
CONCATENATE '' T_BOM-STKTX INTO W_BOM separated BY SPACE.
IF T_BOM-STLST = '1'.
X_FLDCAT-EMPHASIZE = 'C511'.
ENDIF.
x_fldcat-seltext_l = W_BOM.
x_fldcat-reptext_ddic = W_BOM.
x_fldcat-ddictxt = c_l.
endif.
ENDIF.
CLEAR W_BOM.
if x_fldcat-fieldname = 'MENGE4'.
read table t_stas1 with key stlal = '04'.
if sy-subrc NE 0.
x_fldcat-no_out = 'X'.
ELSE.
PERFORM VAR_BOM USING T_STAS1-STLAL.
CONCATENATE '' T_BOM-STKTX INTO W_BOM separated BY SPACE.
IF T_BOM-STLST = '1'.
X_FLDCAT-EMPHASIZE = 'C511'.
ENDIF.
x_fldcat-seltext_l = W_BOM.
x_fldcat-reptext_ddic = W_BOM.
x_fldcat-ddictxt = c_l.
endif.
ENDIF.
CLEAR W_BOM.
if x_fldcat-fieldname = 'MENGE5'.
read table t_stas1 with key stlal = '05'.
if sy-subrc NE 0.
x_fldcat-no_out = 'X'.
ELSE.
PERFORM VAR_BOM USING T_STAS1-STLAL.
CONCATENATE '' T_BOM-STKTX INTO W_BOM separated BY SPACE.
IF T_BOM-STLST = '1'.
X_FLDCAT-EMPHASIZE = 'C511'.
ENDIF.
x_fldcat-seltext_l = W_BOM.
x_fldcat-reptext_ddic = W_BOM.
x_fldcat-ddictxt = c_l.
ENDIF.
endif.
CLEAR W_BOM.
if x_fldcat-fieldname = 'MENGE6'.
read table t_stas1 with key stlal = '06'.
if sy-subrc NE 0.
x_fldcat-no_out = 'X'.
ELSE.
PERFORM VAR_BOM USING 6.
CONCATENATE '' T_BOM-STKTX INTO W_BOM separated BY SPACE.
IF T_BOM-STLST = '1'.
X_FLDCAT-EMPHASIZE = 'C511'.
ENDIF.
x_fldcat-seltext_l = W_BOM.
x_fldcat-reptext_ddic = W_BOM.
x_fldcat-ddictxt = c_l.
ENDIF.
endif.
CLEAR W_BOM.
if x_fldcat-fieldname = 'MENGE7'.
read table t_stas1 with key stlal = '07'.
if sy-subrc NE 0.
x_fldcat-no_out = 'X'.
ELSE.
PERFORM VAR_BOM USING 7.
if sy-subrc = 0.
CONCATENATE '' T_BOM-STKTX INTO W_BOM separated BY SPACE.
IF T_BOM-STLST = '1'.
X_FLDCAT-EMPHASIZE = 'C511'.
ENDIF.
x_fldcat-seltext_l = W_BOM.
x_fldcat-reptext_ddic = W_BOM.
x_fldcat-ddictxt = c_l.
ENDIF.
endif.
ENDIF.
CLEAR W_BOM.
if x_fldcat-fieldname = 'MENGE8'.
read table t_stas1 with key stlal = '08'.
if sy-subrc NE 0.
x_fldcat-no_out = 'X'.
ELSE.
PERFORM VAR_BOM USING 8.
if sy-subrc = 0.
CONCATENATE '' T_BOM-STKTX INTO W_BOM separated BY SPACE.
IF T_BOM-STLST = '1'.
X_FLDCAT-EMPHASIZE = 'C511'.
ENDIF.
x_fldcat-seltext_l = W_BOM.
x_fldcat-reptext_ddic = W_BOM.
x_fldcat-ddictxt = c_l.
ENDIF.
endif.
ENDIF.
modify i_fldcat from x_fldcat index T_INDEX.
T_INDEX = T_INDEX + 1.
CLEAR X_FLDCAT.
ELSE.
if x_fldcat-fieldname = 'IDNRK'.
x_fldcat-seltext_l = 'Component'.
x_fldcat-reptext_ddic = 'Component'.
x_fldcat-inttype = c_c.
endif.
if x_fldcat-fieldname = 'MAKTX'.
x_fldcat-seltext_l = 'Component Description'.
x_fldcat-outputlen = 25.
x_fldcat-reptext_ddic = 'Component Description'.
x_fldcat-inttype = c_c.
endif.
if x_fldcat-fieldname = 'MEINS'.
x_fldcat-seltext_l = 'UOM'.
x_fldcat-reptext_ddic = 'UOM'.
x_fldcat-ddictxt = c_l.
endif.
CLEAR W_BOM.
if x_fldcat-fieldname = 'MENGE1'.
PERFORM VAR_BOM USING 1.
if T_BOM-STKTX IS NOT INITIAL.
CONCATENATE '' T_BOM-STKTX INTO W_BOM separated BY SPACE.
IF T_BOM-STLST = '1'.
X_FLDCAT-EMPHASIZE = 'C511'.
ENDIF.
x_fldcat-seltext_l = W_BOM.
x_fldcat-reptext_ddic = W_BOM.
x_fldcat-ddictxt = c_l.
else.
X_FLDCAT-NO_OUT = 'X'.
X_FLDCAT-TECH = 'X'.
endif.
ENDIF.
CLEAR W_BOM.
if x_fldcat-fieldname = 'MENGE2'.
PERFORM VAR_BOM USING 2.
if T_BOM-STKTX IS NOT INITIAL.
CONCATENATE '' T_BOM-STKTX INTO W_BOM separated BY SPACE.
IF T_BOM-STLST = '1'.
X_FLDCAT-EMPHASIZE = 'C511'.
ENDIF.
x_fldcat-seltext_l = W_BOM.
x_fldcat-reptext_ddic = W_BOM.
x_fldcat-ddictxt = c_l.
else.
X_FLDCAT-NO_OUT = 'X'.
X_FLDCAT-TECH = 'X'.
endif.
ENDIF.
CLEAR W_BOM.
if x_fldcat-fieldname = 'MENGE3'.
PERFORM VAR_BOM USING 3.
if T_BOM-STKTX IS NOT INITIAL.
CONCATENATE '' T_BOM-STKTX INTO W_BOM separated BY SPACE.
IF T_BOM-STLST = '1'.
X_FLDCAT-EMPHASIZE = 'C511'.
ENDIF.
x_fldcat-seltext_l = W_BOM.
x_fldcat-reptext_ddic = W_BOM.
x_fldcat-ddictxt = c_l.
else.
X_FLDCAT-NO_OUT = 'X'.
X_FLDCAT-TECH = 'X'.
endif.
ENDIF.
CLEAR W_BOM.
if x_fldcat-fieldname = 'MENGE4'.
PERFORM VAR_BOM USING 4.
if T_BOM-STKTX IS NOT INITIAL.
CONCATENATE '' T_BOM-STKTX INTO W_BOM separated BY SPACE.
IF T_BOM-STLST = '1'.
X_FLDCAT-EMPHASIZE = 'C511'.
ENDIF.
x_fldcat-seltext_l = W_BOM.
x_fldcat-reptext_ddic = W_BOM.
x_fldcat-ddictxt = c_l.
else.
X_FLDCAT-NO_OUT = 'X'.
X_FLDCAT-TECH = 'X'.
endif.
ENDIF.
CLEAR W_BOM.
if x_fldcat-fieldname = 'MENGE5'.
PERFORM VAR_BOM USING 5.
if T_BOM-STKTX IS NOT INITIAL.
CONCATENATE '' T_BOM-STKTX INTO W_BOM separated BY SPACE.
IF T_BOM-STLST = '1'.
X_FLDCAT-EMPHASIZE = 'C511'.
ENDIF.
x_fldcat-seltext_l = W_BOM.
x_fldcat-reptext_ddic = W_BOM.
x_fldcat-ddictxt = c_l.
else.
X_FLDCAT-NO_OUT = 'X'.
X_FLDCAT-TECH = 'X'.
ENDIF.
endif.
CLEAR T_BOM-STLST.
CLEAR W_BOM.
if x_fldcat-fieldname = 'MENGE6'.
PERFORM VAR_BOM USING 6.
if T_BOM-STKTX IS NOT INITIAL.
CONCATENATE '' T_BOM-STKTX INTO W_BOM separated BY SPACE.
IF T_BOM-STLST = '1'.
X_FLDCAT-EMPHASIZE = 'C511'.
ENDIF.
x_fldcat-seltext_l = W_BOM.
x_fldcat-reptext_ddic = W_BOM.
x_fldcat-ddictxt = c_l.
else.
X_FLDCAT-NO_OUT = 'X'.
X_FLDCAT-TECH = 'X'.
endif.
endif.
CLEAR T_BOM-STLST.
CLEAR W_BOM.
if x_fldcat-fieldname = 'MENGE7'.
PERFORM VAR_BOM USING 7.
if T_BOM-STKTX IS NOT INITIAL.
CONCATENATE '' T_BOM-STKTX INTO W_BOM separated BY SPACE.
IF T_BOM-STLST = '1'.
X_FLDCAT-EMPHASIZE = 'C511'.
ENDIF.
x_fldcat-seltext_l = W_BOM.
x_fldcat-reptext_ddic = W_BOM.
x_fldcat-ddictxt = c_l.
else.
X_FLDCAT-NO_OUT = 'X'.
X_FLDCAT-TECH = 'X'.
endif.
endif.
clear t_bom-STLST.
CLEAR W_BOM.
if x_fldcat-fieldname = 'MENGE8'.
PERFORM VAR_BOM USING 8.
if T_BOM-STKTX IS NOT INITIAL.
CONCATENATE '' T_BOM-STKTX INTO W_BOM separated BY SPACE.
IF T_BOM-STLST = '1'.
X_FLDCAT-EMPHASIZE = 'C511'.
ENDIF.
x_fldcat-seltext_l = W_BOM.
x_fldcat-reptext_ddic = W_BOM.
x_fldcat-ddictxt = c_l.
else.
X_FLDCAT-NO_OUT = 'X'.
X_FLDCAT-TECH = 'X'.
endif.
endif.
modify i_fldcat from x_fldcat index sy-tabix.
CLEAR X_FLDCAT.
endif.
endloop.
endform. " build_field_catalog
FORM VAR_BOM USING P_CNT.
if NOT stlal-low = ''.
LOOP AT T_BOM where stlal = t_stas1-stlal .
READ TABLE T_BOM with key stlal = t_stas1-stlal.
IF SY-SUBRC <> 0.
T_BOM-STKTX = ''.
clear t_bom.
exit.
ENDIF.
ENDLOOP.
ELSE.
LOOP AT T_BOM .
READ TABLE T_BOM INDEX P_CNT.
IF SY-SUBRC <> 0.
T_BOM-STKTX = ''.
clear t_bom.
exit.
ENDIF.
ENDLOOP.
ENDIF.
ENDFORM. "VAR_BOM
form call_list_viewer.
delete T_FINAL where IDNRK eq ''.
data : T1_MAST like T_MAST occurs 0 with header line.
data : t_stas like STAS occurs 0 with header line.
data : t_stko like stko occurs 0 with header line.
clear : t_stas[],t_stas,t1_STPO,t1_STPO[],t_stko,t_stko[],t1_mast,
t1_mast[].
SELECT MATNR WERKS STLAN STLNR STLAL ANDAT
INTO CORRESPONDING FIELDS OF TABLE T1_MAST
FROM MAST WHERE MATNR = MATNR AND WERKS = WERKS
AND STLAN = STLAN AND STLAL IN STLAL.
if not T1_MAST[] is initial.
read table T1_MAST index 1.
select * from stas into table t_stas
where stlnr = T1_MAST-STLNR
and stlal in stlal
and STLTY NE 'D'.
endif.
IF NOT T1_MAST[] IS INITIAL.
SELECT STLTY STLNR STLKN STPOZ ANDAT IDNRK POSTP POSNR
MEINS MENGE FMENG POTX1 OBJTY STVKN
INTO CORRESPONDING FIELDS OF TABLE T1_STPO
FROM STPO
FOR ALL ENTRIES IN T1_MAST
WHERE STLNR = T1_MAST-STLNR
AND FMENG = 'X'.
ENDIF.
sort t_stas by STLAL STVKN.
sort t_stas by STLNR STLAL.
loop at T1_MAST.
loop at t_stas where STLNR = T1_MAST-STLNR
and STLAL = T1_MAST-STLAL.
LOOP AT T1_STPO where STLKN = t_stas-STLKN.
IF T1_MAST-STLAL = 01.
T_FINAL-MAKTX = T1_STPO-POTX1.
T_FINAL-MEINS = T1_STPO-MEINS.
T_FINAL-MENGE1 = T1_STPO-MENGE.
ELSEIF T1_MAST-STLAL = 02.
T_FINAL-MAKTX = T1_STPO-POTX1.
T_FINAL-MEINS = T1_STPO-MEINS.
T_FINAL-MENGE2 = T1_STPO-MENGE.
ELSEIF T1_MAST-STLAL = 03.
T_FINAL-MAKTX = T1_STPO-POTX1.
T_FINAL-MEINS = T1_STPO-MEINS.
T_FINAL-MENGE3 = T1_STPO-MENGE.
ELSEIF T1_MAST-STLAL = 04.
T_FINAL-MAKTX = T1_STPO-POTX1.
T_FINAL-MEINS = T1_STPO-MEINS.
T_FINAL-MENGE4 = T1_STPO-MENGE.
ELSEIF T1_MAST-STLAL = 05.
T_FINAL-MAKTX = T1_STPO-POTX1.
T_FINAL-MEINS = T1_STPO-MEINS.
T_FINAL-MENGE5 = T1_STPO-MENGE.
ELSEIF T1_MAST-STLAL = 06.
T_FINAL-MAKTX = T1_STPO-POTX1.
T_FINAL-MEINS = T1_STPO-MEINS.
T_FINAL-MENGE6 = T1_STPO-MENGE.
ELSEIF T1_MAST-STLAL = 07.
T_FINAL-MAKTX = T1_STPO-POTX1.
T_FINAL-MEINS = T1_STPO-MEINS.
T_FINAL-MENGE7 = T1_STPO-MENGE.
ELSEIF T1_MAST-STLAL = 08.
T_FINAL-MAKTX = T1_STPO-POTX1.
T_FINAL-MEINS = T1_STPO-MEINS.
T_FINAL-MENGE8 = T1_STPO-MENGE.
ENDIF.
read table T_FINAL with key MAKTX = T1_STPO-POTX1.
if sy-subrc ne 0.
APPEND T_FINAL.
clear T_FINAL.
elseif T1_MAST-STLAL = 08.
T_FINAL-MAKTX = T1_STPO-POTX1.
T_FINAL-MEINS = T1_STPO-MEINS.
T_FINAL-MENGE8 = T1_STPO-MENGE.
MODIFY T_FINAL FROM T_FINAL TRANSPORTING MENGE8
WHERE MAKTX = T1_STPO-POTX1.
clear T_FINAL.
endif.
endif.
endloop.
endloop.
clear : T_FINAL.
endloop.
sort T_FINAL by IDNRK descending.
*end 09.07.2007
*endded
Thanks and regards
vijay dwivedi -
Export a 3D title text from after effects to my desktop
I am having trouble exporting my 3D title text from after effects to my desktop to use in premiere pro...sending to render que but won't render for export. Am I missing a step?
It would help if we knew your render settings, your experience level with AE, a little more about your workflow. Even knowing what version of AE and what OS may be helpful. This is probably just user error. Normal workflow would be to add the composition to the render cue, select a folder (the desktop is a lousy place to store assets by the way) and then press render. Without changing anything you'll get lossless DIm (digital intermediate) suitable for use in any NLE but not suitable for playback. If you need transparency then you should select lossless with alpha in the output module from the pull down.
If you want something else then tell us more.
Inside AE, if you see a search help field at the top right corner of the app type in 'rendering,' press enter, then read through the first two articles. -
Album titles are missing from some of the songs on my iPhone, but show up in iTunes normally.
Some songs that are synced onto my iPhone are missing album names. It's completely blank. I went back and double checked on my computer, and found that the album is all there in iTunes. Furthermore, the album artwork shows up on my iPhone. So something weird has to be happening.
For example, iTunes shows songs as having a name, artist, album, track number, year, etc. When it shows up in Music, the album is missing along with the track number (I assume). The song IS on my iPhone, it's just missing the album TITLE (not the artwork though). I can find the song under songs, but not albums.
I went back and checked in iTunes to make sure all the obvious things weren't affecting it. I removed it from my phone, then re-synced it. I changed the artist name, album name, everything. I checked and unchecked 'part of a compilation.' I put it on a playlist, took it off the playlist, synced the album, the artist, synced nothing and dragged it to my iPhone. Nothing worked. For the life of me I can't get this album name to show up for all the songs on this album. It's weird because the album is definitely shown in iTunes, and the song definitely gets synced to my iPhone without that data.
I'm completely at a loss here. Any thoughts?I have this same issue. All the data (including artwork) is in iTunes, but on py phone (4S, current OS). the album title is missing. If I'm using bluetooth to connect to my car, it shows as "Unknown Album."
There isn't any rhyme or reason to it. I've had it happen to singles as well as one track of a complete album. It doesn't seem to matter if artist matches album artist or not or whether it is part of a compilation.
One more bit of information. I recently purchased the entire soundtrack for Hairspray. At first the album name was on my phone no problem. Then I went into iTunes and edited some track information, changing the artist name (and album artist) to "Cast Recording" and removing the check for compilation. After making those changes, the album name went missing.
Any help would be appreciated. -
How can I make a title (text) on a postcard vertical not horizontal text?
How can I make a title (text) on a postcard layout vertical not horizontal text?
Insert it in a Text Box then rotate this one.
Yvan KOENIG (VALLAURIS, France) lundi 13 juin 2011 16:20:28
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.7
Please : Search for questions similar to your own
before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer ! -
ALV Title Not Display after transporting the Programme from DeV to Qlty
Hellow Experts,
i developed one ALV report with two screens, i transported the report from Development server to Qulaity server.
in Development server report are working fine but in Qulaity server after transporting the TiTle of ALV not display , plz give me some hint , below is my code to display alv title
DATA: alv_grid TYPE REF TO cl_gui_alv_grid.
DATA:alv_grid_ref type ref to CL_GUI_ALV_GRID.
DATA: layout TYPE lvc_s_layo.
layout-grid_title = 'Daily Material Reports.' .
DATA: fieldcat TYPE lvc_t_fcat.
I m using ALL METHOD alv_grid->set_table_for_first_display method for display alv .
Thanks,
Regards
Neha.Hi neha,
use the sap/help link to solve your issue,
[http://help.sap.com/saphelp_erp2004/helpdata/en/0a/b5533cd30911d2b467006094192fe3/content.htm]
if not use the below example code ,
Heading 3 :h3 Set the title of the grid
Fill the grid_title field of structure lvc_s_layo.
Note that the structure lvc_s_layo can be used for to customize the grid appearance in many ways.
DATA:
ALV control: Layout structure
gs_layout TYPE lvc_s_layo.
For example :
Set grid title
gs_layout-grid_title = 'Flights'.
CALL METHOD go_grid->set_table_for_first_display
EXPORTING
i_structure_name = 'SFLIGHT'
is_layout =gs_layout*
CHANGING
it_outtab = gi_sflight.
Regards,
Saravana.S
Edited by: saravanasap on Dec 21, 2011 8:13 AM -
Report generation toolkit how to access "title text" 1.1.3
Hi at all,
in LabView 8.5.1 with Report Generation Toolkit 1.1.2 I used the "Generate Report Get Modified Data.vi" and "Generate Report Set Modified Data.vi" to modify the Report Title Text. In the Version 1.1.3 of the toolkit I found no method to access this property.
Is there anybody solved this problem?
Regards,
NicolasMike,
I'm creating HTML reports.
...and I found an unaesthetic solution (thanks to my college):
immediately after I created a new report, I'm searching in while loop for the first report with empty Title Text using HTML Data global.vi (or anything else in the cluster) and the previous HTML Ref-num is the according report. Now I can set the property using HTML Data global.vi again.
I won't suggest this if you're creating reports at more than one place, but in my case I can't get a race condition.
Nicolas -
How to change Font Type of the Title Text of a JFrame?
Hi,
I want to set a different Font Type for the Title text of the titlebar of my JFrame.
Is it possible? Can anyone show me how if it is?
Thanks.
NiteenMichael,
Thanks. It works!
But there was a problem. I was not using the :-
JFrame.setDefaultLookAndFeelDecorated(true);
so I have to use it now.
Is it possible to do it without the default decorated look and feel? Because the default LNF title bar has too much height and I am cramped for space.
I know that's no excuse. I tried but it doesn't work.. I am using a extended JFrame like this:-
class Testing extends JFrame
public Testing()
setSize(300,100);
setLocation(400,200);
Container container = getContentPane();
/* add components to this container here */
setVisible(true);
When I use getComponent() for the container, I get an ArrayIndexOutOfBound Exception.
When I set the argument to getComponent(0), the font in the title bar is not changed.
What else should I do?
Thanks.
Niteen. -
Email printed to PDF, PDF appears accurate in Acrobat XI Pro, when PDF printed to paper text missing
HELP!!!
I have text disappear from Outlook emails printed to PDF when I print the PDF files from Acrobat XI Pro to a printer.
Here is a sample png from the PDF file printed out of Outlook - all the text is showing.
However when I print the PDF from Acrobat to a printer, the document comes out of the printer with text missing as shown:
The Acrobat print window shows all of the text that should be there as does Acrobat's view of the document.
Also, if I save the file to an image, all of the text is there.
I have tried different emails as well as different printers and the paper printed copies of the PDF emails are always missing text.
Additionally I have tried coverting the PDF file to a PDF/A file and printing that and the same problems occur.
Please send some tips as to how I can fix this!Hello Atul -
i am having similar printing issues with Acrobat 10.1.4.
in my case both PDFs made by me (from InDesign files) and other PDFs made elsewhere and sent to me are missing text when printed to paper -though they look fine both on-screen and in the preview pane, as Katy noted above.
these PDFs print fine when i open and print from an older version of Acrobat (9.5.2).
they will also print fine from 10.1.4 if i send them to another printer in the office, (a Dell Color Laser 3110cn), the printer i have a problem with is a Kyocera Mita KM-5053 - which leads me to believe that this is some kind of communication error between Adobe Acrobat Pro 10.1.4 and this printer, or perhaps a driver issue. ?
I don't believe it's merely a preferences/print settings problem as i've gone pretty carefully through all the dialog boxes that seem relevant and have had no luck in solving the problem. Also, the text that's missing seems arbitraty - meaning, it's not merely hyperlinks or certain layers or text in specific type faces that won't print -it's content in the same text box, where other text does print, and it's blacks and colors and various point sizes - in short there are no easily discernable unifying circumstances among the text that does not print.
obvioulsy an easy work around is to just print to the other printer or use the older version of Acrobat, but my concern is more that other people may be experiencing the same issues with PDFs i send them. so if it is a problem in the way i'm generating PDFs (although, as i said, text is also missing from PDFs i have received from other people and printed) i'd like to fix it quickly, so that people trying to print my PDFs don't end up with critical content missing.
i'm on a 2008 MacBook Pro running Mac OS X Lion 10.7.5, and using the Acrobat (X Pro v 10.1.4) that came with the CS6 Design & Web Premium package - although i'm looking at it online now and it's listed as Acrobat XI Pro..
any input you have would be much appreciated.
thank you,
bethany -
Gallery title text cut off and cover image not updating
Hello,
I've been struggling with this for a couple of weeks now, and it's driving me mad. I've been making a book in iBook Author on my iMac (10.10.2). When I preview it in iBooks on the mac it all looks fine, but when I send it to my iPad2 (iOS 8.2), which I do via dropbox, the front cover image reverts to the default for the template I choose, and gallery and interactive widget title text gets cut off (see attached pic) regardless of the size I make it, or the indent I specify.
I've tried deleting the book several times, restarted the iPad, and whatever I do it still appears the same.
I'd be grateful for any suggestions.
Cheers,
Kev.Hi Christine,
When you say " It's not there when viewed outside of Cp/swf. Using v5.5.l", does that mean this problem only occurs in a specific output?
Try this -- Go to preferences-- SWF Size and Quality and under customer, uncheck Advance Project Compression, republish the course and check the results.
Thanks,
Anjaneai -
What font is used in the "video title text" in Adobe Presenter Video Creator? I need to replicate it
What font is used in the "video title text" in Adobe Presenter Video Creator? I need to replicate it.
I just noticed, Hah! That it is the same font as used in the text on this page. Anyone know what it is?
-
NACE Configuration for Purchase order output "Title Text"
Hello Gurus,
I have a small question, Is it possible to make dynamic Document title when sending purchase order email to vendor.
I have checked configuration in NACE where for each output type where you can maintain "Mail title and Texts". For example if your output type is Email then you can maintain document title text as "Purchase order Email".
Our requirement is to put purchase order name in document title i.e. when vendor receive email in their inbox it says purchase order number.
Please advise.
Thank you
RiteshThanks Jurgen. This note helped us.
Best Regards
Ritesh -
How do you change the color of the title text?
The main title text for the tap your currently on shows up centered one line above the tab row. The default is black text, with a gray drop shadow, but that doesn't work with dark background themes/personas. How do I go about changing that text color so that its visible on a dark background. I've tried changing font stylings in general for the browser, and I've tried changing the color values in the about:config for the persona, but none of that works. How do you change the color of the title text?
That colors option under content doesn't change the color of the title text, but thanks anyways
Maybe you are looking for
-
I cannot create a site-template in my own language (danish) and deploy a site based on the template. I created a template from a "fresh" SharePoint project site with no tampering. When trying to deploy a new site based on the templat I get the follow
-
File Sharing on the Network not working properly
Hoping someone can help and not really sure if its the right place to ask but I am totally at a loss so thought I would give it go. Technically it is an issue with logging onto the Shared Folders from a Media Player but not sure if the issue has been
-
My memory is full of "other" what files need to be deleted to free up more memory?
My memory is full of "other" what files need to be deleted to free up more memory?
-
How to set the default behavior of slide effect?
Basically, I am using the spry widget that allow me to do the click and expand (like how sections get slide up and down) effect. (Sorry if I don't know the term, I am running a Chinese version... if it helps at all... it's "滑動" in chinese character)
-
Customize the skin of the IC CRM 5.0
Hello! I need to customize the skin of the IC CRM 5.0. I've alerady done this customization in old versions of CRM. In an old version i was able to make a copy of the file and change thtmlb_stand.css, but in 5.0 version is different. Anyone could hel