Always show clock, down in the corner?

I would like to see a small clock down in a corner at all times so I can see the time at a glance. In dashboard preferences I don't see a way to do this. Is there a way?
I found a shareware clock I can buy, but am hoping the iMac came with this basic tool and I just haven't found it yet. Thanks.

Hey Fran,
In system preferences under the Date & Time pane select the "clock" tab. You should have the option to view the time in a window that you can move around the screen.

Similar Messages

  • My mobile phone is always automatically shut down at the time of the photo.

    My mobile phone is always automatically shut down at the time of the photo.

    Plug the device into a wall outlet and leave it for about 20 minutes. If it has not powered on at that point try a reset by pressing and holding the home and power buttons for about 15 seconds until the white Apple logo appears.

  • VS 2013 Prof. edition always shows "Could not complete the action"

    Hi all,
    When I open any .ascx file VS2013 always shows alert, and when I close, it shows it again.
    Could you help please?
    Thanks.

    Hi Galym,
    >>VS 2013 Prof. edition always shows "Could not complete the action"
    According to your description, could you please tell if you get this issue when you open any .ascx files in a specific app or all web apps have the same issue?
    So if possible, I suggest you can create a simple web project in VS2012 Prof and add a .ascx files under the web project and open it again check if you get same issue.
    (1) If you get same issue in a sample web project, I suggest you can try the following suggestion to check this issue.
    Step1: I suggest you can try to open these .ascx files in VS safe mode check if you install some Add-ins or extension tools in your VS2013 IDE.
    Reference:
    https://msdn.microsoft.com/en-us/library/ms241278.aspx
    Step2: I suggest you can try to reset your VS setting file by going to Tools->Import and Export Settings check this issue again.
    Step3: If the above suggestions still could not work, maybe you will need to repair or re-install the VS2013 Prof check this issue again.
    (2) If you just get this error in a specific app, I suggest you delete these .ascx files and then add new .ascx files for the specific app. Or you can directly to ask this issue to the web forum:
     http://forums.asp.net where asp.net experts live in.
    If you have any update messages about your issue, please free for me.
    Best Regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Settings is always showing a 1 at the top right corner on the icon.

    My "Settings" is always showing a red 1 at the top right corner of the icon. There is no update at all, and this is annoying me. I restore my phone, make sure everything is up to date, and the number 1 is still showing. Anyone with this issue?

    Keep trying.  The 1 is telling you to do something. 
    Pretend it's a mystery, and you're Scooby Doo. 

  • SMC update always show up when starting the computer...

    hi after the SMC update, every time when I restart my computer that SMC window always show up telling me that I'm at the 1.1 version. Is this normal? how do I turn it off? cause it is slowing down my computer when it's starting up.
    thanks!

    Although deleting it will probably solve the problem, I didn't have to when I ran the SMC update. It's still there and it doesn't pop up at every startup.
    I just took a look at the script in the SMC firmware update installer that gets run after the install completes, and it looks like it just adds the updater application as a login item. Have you tried manually removing it from your login items?
    Click on the Apple menu at the top left of the screen and choose System Preferences. Click on Accounts in the lower-left area of that window. Click on the Login Items "tab" at the top of the window and see if the firmware update is in the list. If it is, you can remove it by clicking on it and clicking the little minus sign button.
    MacBook Pro 17" 2.16 GHz   Mac OS X (10.4.7)  

  • HT3180 When trying to play itunes and slideshows from my Mac book to Apple TV the small icon on the bottom right of the screen which switches between Computer and Apple TV doesn't always show up, and therefore the function doesn't work.  What's up?

    We are trying to play playlists and a slideshow from an Apple Macbook wirelessly to the Apple TV.  The small, upward arrow icon that appears on the bottom right of the screen (which allows you to pick Computer or Apple TV) doesn't always show up, and therefore, we can't get it to work.  Any thoughts?

    Airplay mirroring software will not work with anything below Mountain Lion 10.8 and an Apple computer from 2011 or newer.
    http://support.apple.com/kb/HT5404
    Go to "About this Mac" and tell us:
    1. What OS X version you are running
    And then click on "More Info" and tell us
    1. What year is your Macbook.
    Also tell us a little about your cable and Wireless setup.
    Maybe we can help.

  • EM alway shows OID down ?

    Hi,
    I have installed 10gAS in United Linux and already applied Patch Set 1. While I can startup OID by command mode, the EM's browser still shows that OID is down ???
    In the mean time I'm able to login ORASSO and OIDDAS by the URL
    http://my-server:7780/pls/orasso
    http://my-server:7780/oiddas
    Any ideal ?

    Part one is tied to how often the databases are polled for status which I believe defaults to 5 minutes. The Data Guard page on the other hand does a immediate query to the databases and the Data Guard Broker for information so that its information is always up to date.
    As far as the status icon is concerned, Enterprise Manager has never differentiated between UP Open and UP Mounted to my knowledge. That would be an enhancement request, I guess.
    Hope that helps.
    Pete

  • On my ipod touch it always shows cannot connect to the internet how can I get it to connect?

    On my ipod touch It shows i am connected wifi and have put in the correct password yet it says i am not connected to the internet.When i try to go on my appd or itunes it is stuck on loading. And so I reset it in my settings now all my apps are blank but when i click on them they are there but i have to sign in to itunes.

    If Restrictions are set for Safari, iTunes ect, theh apps are hidden which is not the case for the poster.
    Try the following:
    - Reeet. Nothing will be lost.
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on your router
    - Reset network settings: Settings>General>Reset> Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    You may also have to restore the iPod

  • HT1476 My iphone 4s doesn't charge at all.  Via wall adapter, or usb regardless of cable).  Always shows plug icon, never the lightning bolt.

    My iphone 4s worked perfectly fine for 1 year.  Then all of a sudden one day it quit charging.  It does show the plug icon (regardless of how charged it is), but the battery percentage number keeps dropping.  It drained completely and I took it to get repaired.  They changed the battery, which gave me one more day.  (long enough to back up my pictures and take a few screenshots showing this plug icon regardless of charge level. 
    I have tried 3 different cables, and have tried to charge my phone on two different computers.  No results.  I reset back to factory settings/ installed the newest system update.  Still no results. 
    Please help. 

    Never overlook the simple, physical cause of a problem. It is too easy to go for "this is an advanced complex electronic device therefore the problem must be equally complicated"
    Decades ago used to man a technical support phoneline. Loads of problems with external hard drives. The outstanding solution was "Is it plugged in? Is the power outlet switched on?".........

  • Trying to download Lion trought App store, it downloads and it asks for account login and it installs again it never shows installed it always shows installing. this is the third time it's installing. Am I doing something wrong?

    Been trying to download Lion from the App Store.  It saks for login, I login in and it starts install.  After about 13 hours it finishes download then asks for login again.  After login, it starts installing again. It never shows installed.  This is the third time I am doing this.  Am I doing something wrong?

    Sorry, my bad, we have the iMac G5 10.6.8.  I just got home and the message said an error occurred and was unable to download.  Am I doing something wrong or is there something I need to do.

  • Light leakage in the corner of screen

    Hi, can someone help. I have light leakage
    At the corners of my screen on the iphone
    4s if i press down on the corner where the
    Light is showing it goes so it seems as though
    The casing comes away very slightly. Has
    Someone else got this problem. And is it
    A big issue or something that is just nothing
    To worry about.

    Without seeing how bad this is it's hard to comment. It won't affect the functioning of the iPhone but if you think it is excessive then take the phone to an Apple store for evaluation or contact Apple support.

  • NRO Corner with Firefox posts a return tab everytime you scroll past an item. Consequently, when you click the return arrow, you don't return to NRO home, but stay in the Corner.

    The 'items' I refer to are the various articles in the blog 'The Corner'. The 'problem' occurs on any of NRO's blogs, i.e. 'Bench Memos', 'The Campaign Spot', etc.
    The point is that if I, from the NRO home page, select 'the Corner', the back arrow key should point then to NRO home, no matter how far down into 'the Corner' I read. As it happens, however, every discrete item inside the blog posts its own pointer to the history and one ends up with multiple repetitive pointers to the Corner, rather than to one NRO home.

    All,
    I haven't looked at that tutorial for quite a while but just gave it a quick look.
    Further down in the tutorial, it directs you to set the value of P7_PREV_PAGE, under Add Functionality to Support Adding Multiple Issues Sequentially - have you done that? There is also a mention that there is more branching to be done - "The branch you just created is looking for a value in P7_PREV_PAGE. Since the page was not called from another page, the value has not been set. You need to fix that next." It goes on to have you define that value from other places.
    Can you describe what you are doing when you get the error? There could be something missing from the tutorial. A way around it would be to create a default value for P7_PREV_PAGE so that if it is not set, a default page will be used.
    -- Sharon

  • WLS Server shows as down, but is up in WLS console

    I have a WLS Domain discovered in OEM (12c). I used the same agent configuration and setup on all 3 servers in the cluster. Server 1 and 2 show as up, as well as the cluster and overall domain. Server 3 shows as down with numerous incidents flagged with Agent down and Weblogic Server Is Down. In WLS Console, all three servers are Running and working properly.
    What sort of emctl commands can be utilized to verify that the agent on Server 3 is communicating properly with the WLS? Or steps within OEM, perhaps to verfiy the communication. I have checked config files and setup procedures, and Server 3 is identical to Server 1 and 2, aside from the 1/2 vs 3 and corresponding hostnames. Looking for any sort of input...

    That is why I am confused. The agent is actually up. It is secured and sending metrics for the box perfectly. I can perform ./emctl upload agent successfully. When I navigate to Host Targets, the box shows as up. But when I navigate to Middleware Targets, on the WLS domain, Server 3, which is on that box, shows as down. The agent unreachable is cleared on that page, but it shows the WebLogic Server as down.
    When I access the WLS console, the server is up, running and working fine. That is why I am lost when it comes to my next step. If agent is working fine and the setup is identical to server 1 and 2. Why is it down, when the rest are up? I noticed in the Server3.log file, I am getting spammed with a Certificate error. "CERTIFICATE_UNKNOWN alert was recieved from *Server 3*. The peer has an unspecified issue with the certificate." I am getting the cert warning from server 3 on server 3. So is there a problem with some certificate and that is why the agent on server 3 can not communicate with the WLS?

  • Wireless Shows as down ? Please advise ..

    Hiya ,
    Since a few days ago , my wireless instance status shows as "Down" in the EM console.
    Upon closer inspection i saw that my Standalone proccess weren't there anymore ie.
    iAS Wireless System Log Directory is e:\Oracle\Mid10g\wireless\logs
    PanamaServer perfmonitor_1001 failed to initialize
    PanamaServer is exiting ...
    iAS Wireless System Log Directory is e:\Oracle\Mid10g\wireless\logs
    PanamaServer messaging_gtwy_1000 failed to initialize
    PanamaServer is exiting ...
    I can access my wireless portal , and all other functions of the webtool... just these two services won't start up - showing the iwreless as down.
    any suggestions ?
    Also - do i need these two services to test the messaging / notification functions of OAS Wireless ?
    regards
    Wynand

    also log.xml reports the following erros when starting up the midtier
    Log Entry: June 9, 2005 10:15:22 AM CAT
         Component          Wireless
         Message Type          Error
         Organization ID          ORACLE
         User ID          SYSTEM
         Host Name          portal
         Host Network Address          10.1.162.117
         Thread ID          Orion Launcher
         Message Level          1
    Message Text
    [Orion Launcher] at oracle.wireless.me.provisioning.ProvisioningLogger._getInstanceId(ProvisioningLogger.java:169)
    -->ProvisioningLogger: Instance Id is null time: 1118304922343

  • HT4623 when i make software update my i phone shut down and it can't start it always Show the apple mark and then disappear i can't make any thing what the problem and what the solution thank you

    Dear gentlemen:
       i know how can update ios update but when i make update my iphone shut down and it can't start.
      it always Show the apple mark and then disappear i can't make any thing i need know what can i do ?
    thank you

    Contact iTunes Customer Service and request assistance
    Use this Link  >  Apple  Support  iTunes Store  Contact

Maybe you are looking for

  • Need to transfer field KLABC (ABC Classification) between CRM and R/3

    Hello Group, We plan to make the R/3 field KLABC (ABC Classification) of a customer (R/3 Table KNVV, Attribute KLABC) available in SAP CRM under Customer's sales area data. It should also be maintainable in SAP CRM. After some analysis we found out,

  • How can I get an older version of iCloud, V3.1 doesn't work?

    iCloud use to work for me until V3.1, does anyone know how to get an older copy, maybe V3.0? The Photos button is greyed out and no matter what I try I can't get it to work and I've tried a lot!!! Windows 7 machine

  • Adobe Ideas file sync problems

    I'm using Adobe Ideas on a third Gen iPad with iOS 7 None of my files will sync to creative cloud. The sync process message simply alternates between 'awating connection', 'analysing' and complete but nothing happens to the files. The progress bar on

  • Permissions repair/ disk utility

    Hello: I believe I have a permissions repair problem as but I'm not entirely sure. I'm very untechnical and somewhat shakey on my conclusions and how to proceed. My computer slowed down this week after downloading freeware. I dumped all but one progr

  • Can't connect to AE with my PC (Windows XP)

    I've been connecting my PC (Lenovo Thinkpad, Windows XP SP 3) and my eMac to my Airport Extreme for over a year, but my PC suddenly stopped being able to connect. The AirPort Utility on my PC doesn't see any base stations. My PC's wireless utility, A