Am I able to see the date/time an app was installed or deleted? I know your able to see purchased apps but what about free app info?

Ok, so I know if you go into Itunes and go to purchase history/ apps you can see the apps that have been downloaded in the past. What I want to know is if there is a way I can see the exact date/time the apps were downloaded/deleted.

Why can you not buy from the ipod?
What happens when you try?
Error message?
What does it say?
Any info?

Similar Messages

  • Have tried the date time it's good not sure what else to look at and apple care is useless

    keep getting error 1202 tried the date time thing they are fine, apple is of no help. I cant purchase song, can't look at wish list or account information and not sure what eles.  any ideas about where I need to look at. I don't have the speedbit vidoe so that aint' it.

    I cannot see the damage. But the screening centre has pics showing it is damaged. Apple refuses to cover a physical damage. But the reason the device is damaged could only be coz it had a poor battery life from start. The iPhone 5 is infamous for the same. We all know it. Apple conveniently denies responsibility.
    And the Insurance company says it covers only accidental damage. Now how am I to prove an 'accidental' damage ? Unless I lie to them....

  • How to get the last time a record was modified or created ?

    Is there a way (hidden system fields for example, system view, other ?) to get the last time a record of a table was modified or the date it was created.
    Thanks for any help.
    Stiphane CAMPION

    blarman74 wrote:
    I know I could do this with a trigger, but I was wondering if there is a data dictionary view I can query to find the date/time a table was last updated. What I have is a table that is constantly getting hammered with new data being uploaded from a third party. We need to keep close tabs to verify that this datafeed is constantly running and bringing in new data. Because the data that comes in comes from multiple timezones and there are hundreds of lines, our attempts at monitoring by just looking at the data leave something to be desired.
    Any ideas?refer this links
    How to find Last modified/updated time of a particular table
    http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:1590655700346557237
    Thanks

  • How to tell the last time a table was updated

    I know I could do this with a trigger, but I was wondering if there is a data dictionary view I can query to find the date/time a table was last updated. What I have is a table that is constantly getting hammered with new data being uploaded from a third party. We need to keep close tabs to verify that this datafeed is constantly running and bringing in new data. Because the data that comes in comes from multiple timezones and there are hundreds of lines, our attempts at monitoring by just looking at the data leave something to be desired.
    Any ideas?

    blarman74 wrote:
    I know I could do this with a trigger, but I was wondering if there is a data dictionary view I can query to find the date/time a table was last updated. What I have is a table that is constantly getting hammered with new data being uploaded from a third party. We need to keep close tabs to verify that this datafeed is constantly running and bringing in new data. Because the data that comes in comes from multiple timezones and there are hundreds of lines, our attempts at monitoring by just looking at the data leave something to be desired.
    Any ideas?refer this links
    How to find Last modified/updated time of a particular table
    http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:1590655700346557237
    Thanks

  • Calling java class from PLSQL  that returns date/time a file was saved

    Does anybody know, is there a java class I can compile into Oracle DB, and call from PLSQL that returns me the date/time a file was saved.
    As far as I'm aware this cannot be achieved using UTL_FILE.
    Please advise
    Thanks
    Warren

    I found this thread from before that might be helpful
    how to connect to UNIX OS from oracle stored procedure

  • HT1212 If I never synced to itunes and I restore the device. Will I lose unstored data? How can I check to see the last time my phone was backed up if I forgot the passcode to my phone?

    If I never synced to itunes and I restore the device. Will I lose unstored data? How can I check to see the last time my phone was backed up if I forgot the passcode to my phone?

    If you can't remember your passcode, you'll need to restore your phone.  If you never synched to iTunes, all data on your phone will be erased.  No way around this.

  • Why can't I sync my facebook invitations to my iCal?  My Mac Mail won't detect the date/time on the email anymore.

    I have been trying to sync my facebook invitations to my iCal and no longer able to do this through my Mac Mail.  When I would receive a facebook invitaiton through my comcast email, I used to be able to hover my mouse over the date/time of the invitation and then I could easily "Add to iCal" or "See Date in iCal", but am no longer able to do so.  I can still add other invitations, just not the facebook invitations.  Any ideas?

    You can get your photos off your phone.  If they are all in Camera Roll just import them to your new computer (http://support.apple.com/kb/HT4083).  If some of them were synced to your iphone from your computer (i.e., in photo library) just use an app like PhotoSync and send them to your new computer wirelessly.  For that matter, you can sync your phone with your new computer without losing your data and settings if you carefully follow this guide: https://discussions.apple.com/docs/DOC-3141.  Your only issue will be non-purchased music on your phone which is not in your new iTunes library, which will require 3rd party software such as Touch Copy to transfer from your phone to iTunes (or you will have to rip you CDs again to import them).

  • HT201269 How do I see the last time my phone was backed up?

    My iphone has gone dark. I was planning on getting a new phone but I can't turn my old phone on to transfer data. How can I see the last time my phone was back up?

    If you back up to iTunes, open iTunes on your computer.  Go to Preferences (from the leftmost item in iTunes' menu bar), then choose "Devices".  The backup time will be shown there.
    If you back up to iCloud, you would be able to see it on your iPhone, but since you can't turn it on, I don't think there is another way to find it.

  • How do you remove the date/time stamp from a photo before printing?

    I have one group of photos in an event that have the date and time stamp on them.  I don't know how to remove the date/time stamp before printing. 

    If you have your camera set to imprint the date/time on the photo you can not "remove it - it is a part of the photo - depending on the surounding photo you might be able to retouch it out
    LN

  • Adding the date/time stamp to videos already created

    We have someone using Elemets 8
    They need to add in the date/time stamp to video's that are already created.
    The camcorder we have does record this information but doesn't allow that information to be put onto the screen its a Canon HD HF200
    We were told by Adobe support we can do this but they wanted $39 plus $39 an hour.
    Anyone out there able to tell me how we can get this done for free?

      Try the Premier Elements forum for video questions. You will get better advice over there. Good luck.
    http://forums.adobe.com/community/premiere_elements

  • I just did something on my mac and now the date, time and battery percentage are in arabic and it says lebanon (arabic) in the language and text preference, how can i change it back to english? ps: i'm hopeless.

    i just did something on my mac and now the date, time and battery percentage are in arabic and it says lebanon (arabic) in the language and text preference, how can i change it back to english?
    ps: i'm hopeless.

    So what you want is for it to say Lebanon (English)?  If so, see if this helps:
    http://m10lmac.blogspot.com/2012/05/fixing-custom-english-region-settings.html

  • How do I get it to show the date & time.

    How do I get it to show the date & time at all times. I don't want to have to click on the day & time to get the date. In the OS 10.4 I could at least get it in the "analog" format. Under leopard it just show a little clock that can't be read.
    I just want to see the time and date at all times in the upper corner on the screen

    Please see my post in your first posting at http://discussions.apple.com/thread.jspa?threadID=1237022&tstart=0
    David

  • Unable to set the date & time screensaver in nokia...

    I enabled the settings in the phone. Once the keypad is locked, the backlight goes off and unable to see the date & time screensaver. The screen saver is visible only after i press any key.

    This is normal behavior most of nokias phone will go black after a period of time to save battery...
    If  i have helped at all a click on the white star below would be nice thanks.
    Now using the Lumia 1520

  • "Show logging" displays the switch UP time not the Date & time

    Hi,
    i have cisco 2950 switch, when i type the show logging, what ever event has happend i am getting like this "26w6d: %LINK-3-UPDOWN: Interface FastEthernet0/24, changed state to down" but it is not showing the date & time when the event has occured, so every time i need to check the show version & have to see the switch up time & then i need to calculate. is there any configuration has to be done where i should get the information of the date & time in place of switch up time eg. like this...
    "Sep4 4:15: %LINK-3-UPDOWN: Interface FastEthernet0/24, changed state to down"

    what you could do is to enable timestamping if not already done so.
    2950(config)# service timestamp debug datetime msec
    2950(config)# service timestamp log datetime msec
    or you can use SNMP to provide traps of the 'events' that occur on the device.
    these SNMP traps will provide the date, time and trap.
    what version IOS on that device? have you enabled timestamping? have you upgrade lately? perhaps an upgrade could be of assistance. i'll verify the operation on some 2950s i have to confirm if i have the same issue or not and what version is being used. i'll post the result when available.

  • Hardcoding/superimposing the date/time-of-day on to video file?

    Hello,
    I've been working with a Panasonic AVHCD HDC-TM900 camera for a while and I need the date/time to display on my video files when I edit them in the source monitor and to display in the final product.  There is no way to do this on the camera itself (according to Panasonic tech support), however I have found that VLC/Media Player Classic are able to display the information during playback.  I think that it's using the subtitle track to pull the information out of the file, as it appears when I enable subtitles in VLC so I know the info is there.. Is there a tool in Premiere which would allow me to incorporate this information on to my project without having to spit out another file?  Worst case scenario, I would also be open to a solution using Media Encoder as I use it for footage from other cameras but would like to avoid that if possible..
    Thank you in advance for your suggestions,
    AY9999

    I'm not sure if this works for AVCHD, but I know it does for DV: DVdate x64 for Adobe Premiere CS5
    Also, if the above doesn't work for AVCHD directly in Pr, you might look at this: Visual AVCHD Time Stamp

Maybe you are looking for

  • HT1386 itunes no longer sees my iphone

    iTunes can no longer see my device.I have removed and re installed everything

  • Bridge CS4 cannot view or edit G10 CR2 files

    Hi, I have searched for this and come up with a few pointers but so far none has worked for me. Running PS CS4 11.0.1 Got latest CR 5.5 and it is in the correct place. Have run CameraProfiles exe file. Have deleted and rebuilt icon cache for folder(s

  • Visual C/C++ code/Labvi​ew code for interfacin​g NI Hardware

    Hi,  i need Visual C/C++ code/Labview code for interfacing NI Hardware and sample project example.

  • No response in Address Book. Running Lion.

    In Address Book, cursor didn't click in search field. I plugged a mouse in to check if it's the mouse pad. No change. Quit and restarted address book so I can now type in the search field but it still won't navigate to the name I type in. Nor does it

  • Using bookmarks for CSH

    Here's the situation: I'm using RoboHelp7 to create a FlashHelp Pro project. I'm then calling the help from a webpage using the RH_ShowHelp() JavaScript function in RoboHelp_CSH.js. Everything works fine EXCEPT when using an ID linked to a bookmark i