Amadmin; changing ldap auth service; unable to set or clear/set bind passwd

I am trying to clear the attribute iplanet-am-auth-ldap-bind-passwd. In the AttributeValuePair, the Value element just contains a single space. This works to clear iplanet-am-auth-ldap-bind-dn, but has no effect on the passwd.
I have also tried setting the password to "hello" and that didn't have any effect either.
Here's my xml file (with name of organization replaced with "myorg"):
<Requests>
<OrganizationRequests DN="o=myorg.org,o=isp">
<ModifyServiceTemplate serviceName="iPlanetAMAuthLDAPService"
schemaType="Dynamic">
<AttributeValuePair>
<Attribute name="iplanet-am-auth-ldap-server"/>
<Value>ldap.myorg.org:389</Value>
</AttributeValuePair>
<AttributeValuePair>
<Attribute name="iplanet-am-auth-ldap-base-dn"/>
<Value>o=myorg.org</Value>
</AttributeValuePair>
<AttributeValuePair>
<Attribute name="iplanet-am-auth-ldap-bind-dn"/>
<Value> </Value>
</AttributeValuePair>
<AttributeValuePair>
<Attribute name="iplanet-am-auth-ldap-bind-passwd"/>
<Value> </Value>
</AttributeValuePair>
<AttributeValuePair>
<Attribute name="iplanet-am-auth-ldap-return-user-dn"/>
<Value>false</Value>
</AttributeValuePair>
</ModifyServiceTemplate>
</OrganizationRequests>
</Requests>

Sirrah wrote:How do I manually mount a drive that automounts?
As root:
ntfs-3g /dev/sdX /mnt/mountpoint
or
mount -t ntfs-3g /dev/sdX /mnt/mountpoint
http://wiki.archlinux.org/index.php/NTFS_Write_Support
You can also pass other options to mount: (in this example drive is ext3)
mount -t ext3 -o user,rw,async /dev/sdX /mnt/mountpoint
check man mount for all the details.

Similar Messages

Set-netadaptervmq / Clear setting

Hi all, I was setting up some network interface cards with vmq settings using set-netadaptervmq and accidentally applied the settings to the 'teamed" nic instead of the physical network interface cards. Now i'm trying to clear the 'MaxProcessors'
value from the teamed nic and don't know how. See the screen pic. Any advice on how to do this?

Hi zBushman,
Unfortunately , I can not find a parameter to clear the number.
My suggestion is to create a new teaming NIC .
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

HT5467 How to change the location service set up when the icon is not inactive?

I can not setting up the location services and change individual location service for each application since the icon are all in the dead icon and I cannot change anything. Is there anyway to make those icons in active?

Here is what I was referring to - when in Control Center, I have the database locations. (sources, targets, OWF etc). Under a database location I selected the connector/location name under Connectors. When I select Deploy Action to Drop the connector/location name will remain. However, if you were to check in the database or the Repository Browser (Locations Report) you will see that the db link is gone. At this point you can safely modify the Locations info in the Connection Explorer (in Design Center). On the other hand, if you want the location to be deleted all together then now you can delete it in the Connection Explorer panel. If you did the prior drop step then at this point all db link info should be gone from the database.

IO Service Level versus Profit Analysis Simulation Set Service Level Change

R12 (RAC) Service Level versus Profit Analysis
Projected Service Level in Analysis workbench shows a strange negative quantity
when ussing Item Simulation Set in a plan.
The customer expects that when Service Level is changed in the item
simulation set, the system should use It.
But Target Service level still appears negative in the Analysis Workbench
Test Case:
Inventory Planner Responsibility.
Navigation: Inventory Plan > Name.
Look for an existing inventory Plan. Click on "Plan Options" Button.
Assign an Item simulation Set.
Save changes.
Close the "Plan Options" window.
From the "Inventory Plan Names" window push the "Launch Plan" Button.
When plan finished, navigate to: Analysis Workbench
Look for the plan, and review the showed value in the field projected Service Level.
They noticed that when they create an Item simulation Set, Original Service Level
field is not populated and they thought maybe It was part of the problem, so they
tried adding a value in the Service Level Field of the item simulation set.
However; it did not work.
They are expecting that if no change has been made to the service level in the Item simulation set, It should use the service level set in the Service Level set, used in the inventory Plan.

Hi Bruyneel,
I've solved the problem. I think while doing kernel or component upgrade SAP clear all configuration that connected from ABAP and JAVA. You can re-config from config tool.
1. Goto \usr\sap\<SID>\<SIst.Num>\j2ee\configtool and execute go.bat
2. cluster-data -> global server configuration -> services -> com.sap.security.core.ume.service.
3. Configure:
ume.login.guest_user.uniquefields with J2EE_GUEST, and make sure the user is already exist in ABAP
ume.persistence.data_source_configuration dataSourceConfiguration_abap.xml
ume.r3.connection.master.ashost
ume.r3.connection.master.client
ume.r3.connection.master.passwd : with SAPJSF user's password
ume.r3.connection.master.sysnr
ume.r3.connection.master.user : SAPJSF User
Refer for this link for help: http://help.sap.com/saphelp_nw04s/helpdata/en/20/361941edd5ef23e10000000a155106/frameset.htm
Thanks & Best Regards,
Yan

Unable to install the GEAR driver set at this time.The GEARAspiWDM service used bz the GEAR driver set is scheduled to be deleted during the next system reboot.Please reboot the system and run iTunes again.help me..I understand this problem..thanks

Unable to install the GEAR driver set at this time.The GEARAspiWDM service used bz the GEAR driver set is scheduled to be deleted during the next system reboot.Please reboot the system and run iTunes again.help me..I understand this problem..thanks

Hi there, i had the exact same problem and posted a thread a few above yours, and these forums wasnt much help nobody replied, so i did a bit of research and followed all the intructions on this site: http://www.gearsoftware.com/cfknowledgebase/articledisplay.cfm?articleid=296
If you follow the steps very carefully and do as each says, this will solve your problem.. Now i am very happy i can actually install iTunes and use it for my iPod.
Remember to be carefully with the steps as the things you will be deleting are very important to your comp.
Hope this helps.
Windows XP

Unable to locate class: com.iplanet.portalserver.auth.service.LoginServlet

Trying to access the portal server via http://portalserver:port get a
500 error response. Looking at the error logs I find this:
[05/Dec/2001:08:46:34] warning (21789): Unable to locate class:
com.iplanet.portalserver.auth.service.LoginServlet
(java.lang.ClassNotFoundException:
com.iplanet.portalserver.auth.service.LoginServlet)
[05/Dec/2001:08:46:34] warning (21789): Internal error: Failed to get
GenericServlet. (uri=/login,SCRIPT_NAME=/login)
Any thoughts?
-matt

Found the problem...
The iPlanet Portal server jars files where not specified in the
webserver's jvm12.conf file.
-matt
Matt MacDonald wrote:
Trying to access the portal server via http://portalserver:port get a
500 error response. Looking at the error logs I find this:
[05/Dec/2001:08:46:34] warning (21789): Unable to locate class:
com.iplanet.portalserver.auth.service.LoginServlet
(java.lang.ClassNotFoundException:
com.iplanet.portalserver.auth.service.LoginServlet)
[05/Dec/2001:08:46:34] warning (21789): Internal error: Failed to get
GenericServlet. (uri=/login,SCRIPT_NAME=/login)
Any thoughts?
-matt

[svn:bz-trunk] 19459: Security API change for auth sync sample/ concept to work in WebLogic, WebSphere.

Revision: 19459
Revision: 19459
Author:   [email protected]
Date:     2010-12-17 10:15:23 -0800 (Fri, 17 Dec 2010)
Log Message:
Security API change for auth sync sample/concept to work in WebLogic, WebSphere.
Adding the PrincipalConverter interface
Implement the converting principal in WebLogic and WebSphere login command
Modified Paths:
    blazeds/trunk/modules/opt/src/weblogic/flex/messaging/security/WeblogicLoginCommand.java
    blazeds/trunk/modules/opt/src/websphere/flex/messaging/security/WebSphereLoginCommand.jav a
Added Paths:
    blazeds/trunk/modules/core/src/flex/messaging/security/PrincipalConverter.java

Thanks for the reply dood... i've found the solution after several tries... i had to set the channel from the actionscript instead of depending on the Service-config.xml file like the following.. then it worked..
var cs:ChannelSet = new ChannelSet();
var chnl:Channel = new Channel();
var customChannel:Channel = new AMFChannel("my-amf", "http://localhost:8080/somehting/messagebroker/amf");
                cs.addChannel(customChannel);
consumer = new Consumer();
consumer.channelSet = cs;

Identity service unable to find the realm

hi'
I am facing issue after configuring "Configuring Identity Service with Oracle Internet Directory"
I followed this administrator guide "http://download.oracle.com/docs/cd/B31017_01/integrate.1013/b28982/service_config.htm#sthref280"
this is the result after running the script:
C:\product\10.1.3.1\OracleAS_1\bpel\system\services\install\ant-tasks>configure_
oid orcladmin welcome1 389 false sonata seedAllUsers oc4jadmin welcome1 oc4j_soa
Buildfile: oid-config.xml
config-oid:
[echo] Configuring OID...
[mkdir] Created dir: C:\product\10.1.3.1\OracleAS_1\ldap\install
[java] Install Configuration
[java] Install Type: ConfigureOID
[java] Oracle Home: C:\product\10.1.3.1\OracleAS_1
[java] JDK Home: C:\product\10.1.3.1\OracleAS_1\jdk
[java] Proxy Required: false
[java] Database Vendor: oracle
[java] OID Host: ${oid.host}
[java] OID Port: 389
[java] OID Realm: sonata
[java] OID Seed: seedAllUsers
[java] Admin User: orcladmin
[java] ***************************************************************
[java] Trying to obtain OID specific details from configuration files.
[java] Warning: You would encounter problems if you have not associated you
r instance with an OID.
[java] ***************************************************************
[java] OID Host is: son1592
[java] OID Port is: 389
[java] Seeding users/roles in OID realm : sonata...
[java] Buildfile: bpminstall.xml
[java] seed-oid:
[java] init:
[java] seed-oid:
[java] Seeding system users/roles into OID ...
[java] Migration of LDIF data completed. All the entries are successfully m
igrated
[java] Seeding demo users/roles into OID ...
[java] Migration of LDIF data completed. All the entries are successfully m
igrated
[java] BUILD SUCCESSFUL
[java] Total time: 9 seconds
[java] Exit: 0
[java] Configuring BPEL identity service configuration file ...
[java] Adding jaas-mode attribute to hw_services orion-application.xml
[java] Adding jaas-mode attribute to orabpel orion-application.xml
bpel-grant-privileges:
[echo] Granting Server privileges to BPMSystemAdmin role...
[java] The specified permission has already been granted to the grantee.
[echo] Granting Domain privileges to BPMDefaultDomainAdmin role...
[java] The specified permission has already been granted to the grantee.
all:
BUILD SUCCESSFUL
Total time: 13 seconds
now when I am using the IdentityService servlet to look up users and roles by going to http://localhost:9700/integration/services/IdentityService/identity?operation=lookupUser and checking the realm
this is the error coming:
<env:Envelope
xmlns:env="http://schemas.xmlsoap.org/soap/envelope/"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:ns0="http://xmlns.oracle.com/bpel/services/IdentityService">
<env:Body>
<env:Fault
xsi:type="env:Fault">
<faultcode>env:Server</faultcode>
<faultstring
xsi:nil="1"/>
<detail>
<ns0:identityServiceError>
<ns0:faultInfo>Realm is not found. Identity service unable to find the realm by name sonata. Check the error stack and fix the cause of the error. Contact oracle support if error is not fixable. </ns0:faultInfo>
</ns0:identityServiceError>
</detail>
</env:Fault>
</env:Body>
</env:Envelope>
thanks
Yatan

hi Anirudh,
do you think this is wrong approach to copy file from home to other instances? actually I followed the following link to configure OID with BPEL
url--> "http://download-uk.oracle.com/docs/cd/B31017_01/integrate.1013/b28982/service_config.htm#BABIBGFF"
as per the document after executing the configure_oid.bat file only the jazn.xml inside the home was getting updated but no change was there in jazn.xml which was inside oc4j_soa folder, this was infact told in the document that we need to manually copy the properties from home--> jazn.xml file, but when I was trying to copy it was giving error, so insted of copying any thing from home--> jaxn.xml file, I copied the file and replaced it inside oc4j_soa.
do you think this is not the right approach?
waiting for inputs.
thanks
Yatan

Unable to install GEAR driver set

When install intunes on my laptop then I got the error report as below:
"Unable to install the GEAR driver set at this time. The GEARAspiWDM service used by the GEAR driver set is scheduled to be deleted during the next system reboot. Please reboot the system and run itunes again."
ALso try to search solution from several forum but this is highlighted with CAUTION because it change registry on system:
http://www.gearsoftware.com/support/forum/viewtopic.php?p=3452
Anyone have other solution to solve this? please help.
Thanks

If you're worried about messing up GEAR, you might try reinstalling it:
http://www.gearsoftware.com/rss/GEAR-drivers-feed.php
Presuming that doesn't help, go ahead and remove it per that article you found, but just backup your registry first, just to be safe:
http://support.microsoft.com/kb/322756

HT4314 I want to change the language of my Game Center (it was set to German because I put the data of my Austrian credit card)

I want to change the language of my Game Center (it was set to German because I put the data of my Austrian credit card)

Mikeandnicki wrote:
I have looked through everything but cannot find a way to delete or spend the 69 cents credit. Can anyone help me?
Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

WS-Security and proxy service: Unable to add security token for identity

What the reason of "Unable to add security token for identity" fault in this situation (10.3.1):
I did simple "hello word" proxy service and tried to apply custom policy binding.
WS-Policy is next:
<wsp:Policy wsu:Id="WS-Policy-Siebel"
     xmlns:sp="http://docs.oasis-open.org/ws-sx/ws-securitypolicy/200702"
     xmlns:wsp="http://schemas.xmlsoap.org/ws/2004/09/policy"
     xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">
     <wssp:Identity
          xmlns:wssp="http://www.bea.com/wls90/security/policy">
          <wssp:SupportedTokens>
               <wssp:SecurityToken
                    TokenType="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#UsernameToken">
                    <wssp:UsePassword
                         Type="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#PasswordText" />
               </wssp:SecurityToken>
          </wssp:SupportedTokens>
     </wssp:Identity>
</wsp:Policy>
Process WS-Security is setted to "yes".
While debugging I see that all works fine - I can authenticate with defined credentials and breakpoints in proxy service flow works fine.
But at the end I get the fault:
Soap fault:
<env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/">
<env:Header/>
<env:Body>
<env:Fault>
<faultcode>env:Server</faultcode>
<faultstring>Unable to add security token for identity</faultstring>
</env:Fault>
</env:Body>
</env:Envelope>
In console:
<09.06.2010 17:39:18 MSD> <Error> <OSB Security> <BEA-387023> <An error ocurred during web service security inbound response processing [error-code: F
ault, message-id: 1721282272521583996--57dc4ccc.1291cc2282d.-7fab, proxy: OSB Project WS-Security/WSSecurityService, operation: NewOperation]
--- Error message:
<env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/"><env:Header/><env:Body><env:Fault><faultcode>env:Server</faultcode><faultstring>Un
able to add security token for identity</faultstring></env:Fault></env:Body></env:Envelope>
weblogic.xml.crypto.wss.WSSecurityException: Unable to add security token for identity
at weblogic.wsee.security.wss.SecurityPolicyDriver.processIdentity(SecurityPolicyDriver.java:175)
at weblogic.wsee.security.wss.SecurityPolicyDriver.processOutbound(SecurityPolicyDriver.java:73)
at weblogic.wsee.security.wss.SecurityPolicyDriver.processOutbound(SecurityPolicyDriver.java:64)
at weblogic.wsee.security.WssServerHandler.processOutbound(WssServerHandler.java:88)
at weblogic.wsee.security.WssServerHandler.processResponse(WssServerHandler.java:70)
Truncated. see log file for complete stacktrace
Incoming soap message is:
<soapenv:Envelope      xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
<soap:Header      xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
<wsse:Security      soap:mustUnderstand="1" xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd">
<wsse:UsernameToken      wsu:Id="unt_TNNp0cBwU7HyPKoq" xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">
<wsse:Username>testuser</wsse:Username>
<wsse:Password      Type="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#PasswordText">testuser</wsse:Password>
</wsse:UsernameToken>
</wsse:Security>
</soap:Header>
<soapenv:Body>
<wss:NewOperation      xmlns:wss="http://www.troika.ru/Enterprise/WSSecurityService/">
<in>string</in>
</wss:NewOperation>
</soapenv:Body>
</soapenv:Envelope>
Edited by: Andrey L. on Jun 9, 2010 5:55 PM

I thought you were getting that exception when accessing the proxy.
No. Authentification works fine. Proxy body works fine. But at the end of proxy appears the exception.
Sorry for my english - I tried to show this situation on image: http://imglink.ru/show-image.php?id=9c0e0c1719f00289faf11696c6703bc3
Are you getting this exception when routing to a business service which is configured for WS-Security ??
I don't use business service in this test project - only simple proxy service with all logic inside.
PS transformation in replace action is very simple too:
(:: pragma bea:global-element-parameter parameter="$newOperation1" element="ns0:NewOperation" location="WSSecurityService.wsdl" ::)
(:: pragma bea:global-element-return element="ns0:NewOperationResponse" location="WSSecurityService.wsdl" ::)
declare namespace ns0 = "http://www.troika.ru/Enterprise/WSSecurityService/";
declare namespace xf = "http://tempuri.org/OSB%20Project%20WS-Security/Hello/";
declare function xf:Hello($newOperation1 as element(ns0:NewOperation))
as element(ns0:NewOperationResponse) {
<ns0:NewOperationResponse>
<out>Hello, { data($newOperation1/in) }!</out>
</ns0:NewOperationResponse>
declare variable $newOperation1 as element(ns0:NewOperation) external;
xf:Hello($newOperation1)
Edited by: Andrey L. on Jun 10, 2010 12:21 PM

BizTalk 2010 Error consuming WCF service metadata. Object reference not set to an instance of an object.

"Error consuming WCF service metadata.
Object reference not set to an instance of an object."
I have no clue what happen to my BizTalk. I checked all the below forum but m clueless why BTS not consuming WCF through Generated Items. I tried both metadata exhange endpoint and metadata file through
svcutil. but all my wcf services are working fine with .net C# client.
http://blogs.msdn.com/b/appfabriccat/archive/2010/11/23/how-using-duplex-mep-to-communicate-with-biztalk-from-a-net-application-or-a-wf-workflow-running-inside-appfabric-part-1.aspx
http://msdn.microsoft.com/en-us/library/bb226552.aspx
http://msdn.microsoft.com/en-us/library/bb798122.aspx
http://masteringbiztalkserver.wordpress.com/tag/wcf-service-consuming-wizard/
I reinstall the WCF lob Adapter SDK to my BizTalk VM but still no clue. no erros in event viewer nothing.
http://www.abdulazizfarooqi.wordpress.com Abdul Aziz Farooqi [BizTalk & SharePoint Consultant] MCPD Web & MCPD SharePoint 2010

Thanks from me too Neal - this worked from me. I wan't able to consume directly from exchange because the certificate is broken. However, I was able to convince Google Chrome to let me view the /Services.wsdl and from there I could save the .wsdl and two
.xsd files. In my case the problem lay at the top of the .wsdl file. I changed the following:
<wsdl:types>
<xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema">
<xs:import namespace="http://schemas.microsoft.com/exchange/services/2006/messages" schemaLocation="messages.xsd"/>
</xs:schema>
by giving the same targetNamespace as assigned in the <wsdl:definitions element, so I ended up with
<wsdl:types>
<xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema" targetNamespace="http://schemas.microsoft.com/exchange/services/2006/messages">
<xs:import namespace="http://schemas.microsoft.com/exchange/services/2006/messages" schemaLocation="messages.xsd"/>
</xs:schema>

The File Replication Service has detected that the replica set "DOMAIN SYSTEM VOLUME (SYSVOL SHARE)" is in JRNL_WRAP_ERROR.

Hi!
I recently took over management of a Windows 2003 domain that had only one domain controller. I was building a second DC for redundancy and discovered that the SYSVOL share on the original DC is in "JRNL_WRAP_ERROR" after the SYSVOL and NETLOGON
share would not create on the new DC. This error goes back as far as the log goes back so I don't know how long it has been in this state.
The message in the event log states to enable "Enable Journal Wrap Automatic Restore" but I found a KB article that says to use the BurFlags key instead. http://support.microsoft.com/kb/290762
Should I run an authoritative restore since I don't have another domain controller with a good SYSVOL?
The File Replication Service has detected that the replica set "DOMAIN SYSTEM VOLUME (SYSVOL SHARE)" is in JRNL_WRAP_ERROR.
Replica set name is    : "DOMAIN SYSTEM VOLUME (SYSVOL SHARE)"
Replica root path is   : "c:\windows\sysvol\domain"
Replica root volume is : "\\.\C:"
A Replica set hits JRNL_WRAP_ERROR when the record that it is trying to read from the NTFS USN journal is not found. This can occur because of one of the following reasons.
[1] Volume "\\.\C:" has been formatted.
[2] The NTFS USN journal on volume "\\.\C:" has been deleted.
[3] The NTFS USN journal on volume "\\.\C:" has been truncated. Chkdsk can truncate the journal if it finds corrupt entries at the end of the journal.
[4] File Replication Service was not running on this computer for a long time.
[5] File Replication Service could not keep up with the rate of Disk IO activity on "\\.\C:".
Setting the "Enable Journal Wrap Automatic Restore" registry parameter to 1 will cause the following recovery steps to be taken to automatically recover from this error state.
[1] At the first poll, which will occur in 5 minutes, this computer will be deleted from the replica set. If you do not want to wait 5 minutes, then run "net stop ntfrs" followed by "net start ntfrs" to restart the File Replication
Service.
[2] At the poll following the deletion this computer will be re-added to the replica set. The re-addition will trigger a full tree sync for the replica set.
WARNING: During the recovery process data in the replica tree may be unavailable. You should reset the registry parameter described above to 0 to prevent automatic recovery from making the data unexpectedly unavailable if this error condition occurs again.
To change this registry parameter, run regedit.
Click on Start, Run and type regedit.
Expand HKEY_LOCAL_MACHINE.
Click down the key path:
   "System\CurrentControlSet\Services\NtFrs\Parameters"
Double click on the value name
   "Enable Journal Wrap Automatic Restore"
and update the value.
If the value name is not present you may add it with the New->DWORD Value function under the Edit Menu item. Type the value name exactly as shown above.

> The message in the event log states to enable "Enable Journal Wrap
> Automatic Restore" but I found a KB article that says to use the
> BurFlags key instead.
http://support.microsoft.com/kb/290762
>
> Should I run an authoritative restore since I don't have another domain
> controller with a good SYSVOL?
The automatic restore process AFAIK will initiate a D2 restore. And if
there's no other DC, sysvol might be gone.
I really would prefer to have control - this means I would do a D4.
Absolutely I would :)
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :))

Changing the AUTH OBJ in table

hi experts,
I am creating the Z* table, when i am creating the the AUTH obj under the table maintenance generator, it is coming as
S_TABU_DIS, but i want to change this AUTH obj to S_TABU_NAM.
looking forward for your valuable answers.

First read [Note 1516880 - Authorization check for generic table access (S_TABU_NAM)|https://service.sap.com/sap/support/notes/1516880]
The authorization concept for the generic table access using such standard transactions as SE16, SE17, SM30, SM31 or SM34 (or their "proxy" transactions) was previously only bound to the authorization object S_TABU_DIS.
With Note 1481950, the authorization concept
was enhanced with the authorization object S_TABU_NAM that checks the access at table name level:
If a user does not have any S_TAB_DIS authorization for a certain table, the system also checks whether he has an S_TABU_NAM authorization. The access is permitted if the user has an S_TABU_NAM authorization...
Regards,
Raymond

Event ID - 13568 The File Replication Service has detected that the replica set "DOMAIN SYSTEM VOLUME (SYSVOL SHARE)" is in JRNL_WRAP_ERROR.

We had a major storm over the weekend which caused an unexpected shutdown.
I am having an issue with one of my domain controller with Event ID 13568
The domain controller which is running Windows Server 2012 was added successfully just a couple of days ago.
I do not have a full backup of the server yet.
It only has a GC role on it.
What are the things I should look out for before I attempt to Enable Journal Wrap Automatic Restore and set it to 1?
Would it be safer to just demote the server and start from scratch?
Thank you all for reading!
Mladen
The File Replication Service has detected that the replica set "DOMAIN SYSTEM VOLUME (SYSVOL SHARE)" is in JRNL_WRAP_ERROR.
Replica set name is    : "DOMAIN SYSTEM VOLUME (SYSVOL SHARE)"
Replica root path is   : "c:\windows\sysvol\domain"
Replica root volume is : "\\.\C:"
A Replica set hits JRNL_WRAP_ERROR when the record that it is trying to read from the NTFS USN journal is not found. This can occur because of one of the following reasons.
[1] Volume "\\.\C:" has been formatted.
[2] The NTFS USN journal on volume "\\.\C:" has been deleted.
[3] The NTFS USN journal on volume "\\.\C:" has been truncated. Chkdsk can truncate the journal if it finds corrupt entries at the end of the journal.
[4] File Replication Service was not running on this computer for a long time.
[5] File Replication Service could not keep up with the rate of Disk IO activity on "\\.\C:".
Setting the "Enable Journal Wrap Automatic Restore" registry parameter to 1 will cause the following recovery steps to be taken to automatically recover from this
error state.
[1] At the first poll, which will occur in 5 minutes, this computer will be deleted from the replica set. If you do not want to wait 5 minutes, then run "net stop ntfrs"
followed by "net start ntfrs" to restart the File Replication Service.
[2] At the poll following the deletion this computer will be re-added to the replica set. The re-addition will trigger a full tree sync for the replica set.
WARNING: During the recovery process data in the replica tree may be unavailable. You should reset the registry parameter described above to 0 to prevent automatic recovery from
making the data unexpectedly unavailable if this error condition occurs again.
To change this registry parameter, run regedit.
Click on Start, Run and type regedit.
Expand HKEY_LOCAL_MACHINE.
Click down the key path:
   "System\CurrentControlSet\Services\NtFrs\Parameters"
Double click on the value name
   "Enable Journal Wrap Automatic Restore"
and update the value.
If the value name is not present you may add it with the New->DWORD Value function under the Edit Menu item. Type the value name exactly as shown above.

I set Enable Journal Wrap Automatic Restore to 1 and it was
successful.
I will monitor it to make sure it does not occur again.
Thanks everyone on your replies
Mladen

Amadmin; changing ldap auth service; unable to set or clear/set bind passwd

Similar Messages

Maybe you are looking for