AMFPHP and remoting components

I am attempting to get AMFPHP going and have just installed
the latest remoting components.I get these errors when running any
samples I have found.
**Error** NetServices.as: Line 24: Error opening include file
RemotingComponentVersion.as: File not found.
#include "RemotingComponentVersion.as"
**Error** NetServices.as: Line 24: Error opening include file
RemotingComponentVersion.as: File not found.
#include "RemotingComponentVersion.as"
Anybody experience this and or can offer a solution?

did you drag and drop the remoting component classes from
"Window ->
Common Libraries -> Remoting" into your library?
perry

Similar Messages

How to use the same services-config for the local and remote servers.

My flex project works fine using the below but when I upload my flash file to the server I doesn't work, all the relative paths and files are the same execpt the remote one is a linux server.
<?xml version="1.0" encoding="UTF-8"?>
<services-config>
    <services>
        <service id="amfphp-flashremoting-service"
            class="flex.messaging.services.RemotingService"
            messageTypes="flex.messaging.messages.RemotingMessage">
            <destination id="amfphp">
                <channels>
                    <channel ref="my-amfphp"/>
                </channels>
                <properties>
                    <source>*</source>
                </properties>
            </destination>
        </service>
    </services>
    <channels>
    <channel-definition id="my-amfphp" class="mx.messaging.channels.AMFChannel">
        <endpoint uri="http://localhost/domainn.org/amfphp/gateway.php" class="flex.messaging.endpoints.AMFEndpoint"/>
    </channel-definition>
    </channels>
</services-config>
I think the problem is the line
        <endpoint uri="http://localhost/domainn.org/amfphp/gateway.php" class="flex.messaging.endpoints.AMFEndpoint"/>
but I'm not sure how to use the same services-config for the local and remote servers.

paul.williams wrote:
You are confusing "served from a web-server" with "compiled on a web-server". Served from a web-server means you are downloading a file from the web-server, it does not necessarily mean that the files has been generated / compiled on the server.
The server.name and server.port tokens are replaced at runtime (ie. on the client when the swf has been downloaded and is running) not compile time (ie. while mxmlc / ant / wet-tier compiler is running). You do not need to compile on the server to take advantage of this.
Hi Paul,
In Flex, there is feature that lets developer to put all service-config.xml file configuration information into swf file. with
-services=path/to/services-config.xml
IF
services-config.xml
have tokens in it and user have not specified additional
-context-root
and this swf file is not served from web-app-server (like tomcat for example) than it will not work,
Flash player have no possible way to replace token values of service-config.xml file durring runtime if that service-config.xml file have been baked into swf file during compilation,
for example during development you can launch your swf file from your browser with file// protocol and still be able to access blazeDS services if
-services=path/to/services-config.xml
have been specified durring compilation.
I dont know any better way to exmplain this, but in summary there is two places that you can tell swf about service confogiration,
1) pass -services=path/to/services-config.xml parameter to compiler this way you tell swf file up front about all that good stuff,
or 2) you put that file on the webserver( in this case, yes you should have replacement tokens in that file) and they will be repaced at runtime .

Exchange Server 2013 and Remote Access VPN on a single server running Windows Server 2012?

Just by way of background, I have been installing and administering network servers, e-mail systems, VPN servers, and the like for many years. However, my involvement with Exchange and Windows Server has been mostly on the forensics and data recovery
level, or as a (sophisticated) user. I have never tried to deploy either from scratch before. My deployment experiences have been mostly with Linux in recent years, and with small private or personal "servers" running such cutting edge
software as Windows XP back when it was new. And even NetWare once.
When a client asked me if I could set up a server for his business, running Exchange Server (since they really want Outlook with all of its bells and whistles to work, particularly calendars) and providing VPN access for a shared file store, I figured it
could not be too difficult given that its a small business, with only a few users, and nothing sophisticated in the way of requirements. For reasons that don't bear explaining here, he was not willing to use a vendor hosting Exchange services or cloud
storage. There is no internal network behind the server; it is intended to be a stand-alone server, hanging off a static IP address on the Internet, providing the entirely mobile work-force of about 10 people with Exchange-hosted e-mail for their computers
and phones, a secure file store, and not much else. If Exchange didn't need it, I would not need to install Active Directory, for example. We have no direct need for its services.
So I did the research and it appears, more by implication than outright assertion, that I should be able to run Windows Server 2012 with Exchange Server 2013 on a server that also hosts Remote Access (VPN only) and does nothing else. And it appears
I ought to be able to do it without virtualizing any of it. However, I have spent the last three or four days fighting one mysterious issue after another. I had Remote Access VPN working and fairly stable very quickly (although it takes a very
long time to become available after the server boots), and it has mostly remained reliable throughout although at times while installing Exchange it seems to have dropped out on me. But I've always been able to get it back after scrounging through the
logs to find out what is bothering it. I have occasionally, for a few minutes at a time, had Exchange Server willing to do everything it should do (although not always everything at the same time). At one point I even received a number of e-mails
on my BlackBerry that had been sent to my test account on the Exchange Server, and was able to send an e-mail from my BlackBerry to an outside account.
But then Exchange Server just stopped. There are messages stuck in the queues, among other issues, but the Exchange Administration Center refuses now to display anything (after I enter my Administrator password, I just get a blank screen, whether on
the server or remotely).
So, I am trying to avoid bothering all of you any more than I have to, but let me just begin with the basic question posed in the title: Can I run Exchange Server (and therefore Active Directory and all of its components) and Remote Access (VPN only) on
a single Windows Server 2012 server? And if so, do I have to run virtual machines (which will require adding more memory to the server, since I did not plan for it when I purchased it)? If it can be done, can anyone provide any pointers on what
the pitfalls are that may be causing my problems? I am happy to provide whatever additional information anyone might like to help figure it out.
Thanks!

An old thread but I ran into this issue and thought I share my solution since I ran into the same issue. Configuring VPN removes the HTTPS 443 binding on the Default Site in IIS for some strange reason; just go and editing the bindings, add HTTPS and things
should be back to normal.

Amfphp - flex remote object error event handler

I'm using amfphp and I want it to return an error that the flex remote object error event handler will pick up. At the moment I can get only the result handler to do anything in flex.

Hi,
Try throwing an exception in the remote method. For example,
function inverse($x) {
    if (!$x) {
        throw new Exception('Division by zero.');
    else return 1/$x;

Where can we donwload Flash MX 2004 Remoting Components?

I've searched all around and cannot see where Adobe provides a link to download the old Flash Remoting components.
All the pages I could get into are with broken links.
Could those links be fixed? Thank you!

Well, for now I found an alternative link. Let's hope the official one gets fixed someday.
Until then, prey for this to work: Flash Remoting Download
See!

Oracle9 i Release 2 (9.2) Deprecated and Desupported Components

Hi all,
I am just getting into Oracle Database.
Being a Java programmer, I was excited of its java support.
However, having just read its list of Deprecated and Desupported Components (see list below), I am wondering about what is the current status of Java support and what are the new alternatives for doing what those previous components were meant to do.
Thanks!
Deprecated and Desupported Components:
n Remote Method Invocation (RMI)/Internet Inter-ORB Protocol (IIOP)
n General Inter-ORB Protocol (GIOP)
n Oracle Servlet Engine (OSE)
n Common Object Request Broker Architecture (CORBA) framework and J2EE
containers
n Java 2 Enterprise Edition (J2EE)
n Java Transaction API (JTA)
n Java Naming and Directory Interface (JNDI)
n CosNaming
n servlets
n Oracle Java Server Pages (OSJP)
n Enterprise Java Beans (EJB) container
The following components will be deprecated in a future release:
n INTYPE File Assistant (IFA)
n Oracle Trace. Oracle Corporation strongly advises the use of SQL Trace and
TKPROF instead.

In previous versions of the database Oracle supported running EJB and other J2EE structures directly out of the database. However, Oracle have an application server, O9iAS, which also does this. Consequently, they have deprecated J2EE support in the database; we're supposed to use O9iAS instead.
We can still use Java in the database, as stored procedures. Oracle is deeply committed to supporting Java per se. Indeed a lot of Oracle's more advanced functionality seems to rely on Java (although, interestingly enough, they also have a rolling program of re-writing that functionality into C, as it performs better).
Cheers, APC

Remoting components

I had them before (2-3 years ago) if i remember correctly,
but never undestood the point.
Now, i can clearly see the point and im running into problems
I was to Adobe.com and dowloaded
flashremoting_components_flash8.msi
and when i run the file i get this error:
1: The InstallScript engine is missing from the machine.
If available, please run ISScript.msi, or contact you support
personell for further assistance.
To point out im running CS3 and what ive read, it is possible
to use Remoting in CS3.
I also found a tutorial about isscript.msi. Thing is i need
to confirm this msi files version and it isnt where it should be.
What to do ? *desperate*

okey, i came this far that i cant install remote components.
now, i found as files on the other way but i still miss
netconnector debugger and other swf files that follow
is there anyone kind enough to share ???

DBA Cockpit: Planning calendar and remote Oracle databases- which method?

For using DBA Planning Calendar to schedule BR*Tools for remote Oracle database AS Java systems I have successfully implemented both the Secure Shell and SAP gateway methods in [Note 1025707 - DBA Cockpit: Planning calendar and remote Oracle databases|https://service.sap.com/sap/support/notes/1025707] and was interested in which of these two methods others have found to be more supportable and maintainable?
In more detail, the note has these two methods for non-ABAP remote systems:
2. Connection through Remote/Secure Shell
Specifically Secure Shell. Rejecting remote shell as too old and insecure a protocol.
3 Connection through SAP gateway
The note provides clues as to how these methods work. Expanding on that:
With #2, central ABAP system calls out to its OS user level to execute the ssh client (after gw/rem_start has been set to the non-default value SSH_SHELL) which it finds in the location specified in gw/ssh (default value is /usr/bin/ssh). It must use password-less authentication and the key-based authentication must also not require a passphrase. (Using ssh-agent is not an option since this is being called from SAP, not from your own script.)
It remotely runs via ssh a command, sapxpg, which must be found in the PATH of the remote user. (This is why the note, which has you place this exe sapxpg and a subset of the BR*Tools in the home dir of the remote user, also has you make sure the home dir is included in the path--your OS might or might not include the user's home dir in the path in the default shell environment for a new user.)
Then via sapxpg, the BR*Tools are invoked.
One thing that may be confusing here is you have to check at least one gateway parameter 'gw/...' in the central system to get the method #2 the non-gateway method to work--this is because the two methods are technically almost the same: in #2, secure shell is used to basically start a gateway on the fly with sapxpg in order to call the BR*Tools each time a DBA Planning Calendar action runs or you view DBA or Backup logs of the remote system from the central system. With #3, the gateway runs continuously on the remote system.
With #3, central system connects to remote SAP standalone gateway, which executes the BR*Tools installed in the standard SAP kernel directory of the SAP gateway. This method is simpler to describe so it sounds like it has less components than the secure shell method, however you do have an entire SAP system running, although it is just a standalone gateway.
Thoughts:
These pros/cons are UNIX/Linux-oriented since I assume most Windows environments do not have added 3rd-party products that provide secure shell so SAP gateway is the only method.
Secure shell
+ Less software required (not counting secure shell which comes with the operating system distribution): just a few SAP executables placed in the home dir of an ordinary user on the remote system.
+ Secure shell service probably automatically starts upon boot of the remote system operating system.
+ Secure shell is a widely used tool outside of SAP for executing commands remotely without passwords.
- Installation is non-standard: shell environment of remote user is not adapted by SAP installer since SAP installer is not used, SAP executables in the home dir of the remote user is non-standard. Has to be setup manually.
- Requires setting up secure shell key-based authentication, which should be known by UNIX/Linux admins or combined Basis/UNIX/Linux admins, but might be less familiar to SAP Web AS only admins.
- If your admin config policy is to have SAP interact as little possible with the OS level for interfaces with other systems, here you are relying on the OS-level secure shell.
- Using a private key that does not require a passphrase on the central system may not fit with your security policies if you have standards for secure shell configuration.
SAP gateway
+ The gateway is a standard installation, performed with SAP installation tool, with the exception of a few additional environment settings that have to be added after the installation. BR*Tools are installed in the standard location. Can use standard procedures for updating this software.
+ Only uses SAP software.
- More software on remote system: standalone gateway just to run BR*Tools and view logs.
- SAP Kernel of remote gateway should probably be updated whenever you do SAP kernel updates across your systems for consistency. One more system to update.
- Shell environment of remote user that runs the gateway looks like something setup by the SAP installer but is not standard because it has a few additional environment variables added.
- Need to make sure the SAP gateway is started on the remote system.

Hi Joe,
I configured a monitoring/dba landscape for two SAP Portals and one SAP BusinessObjects system on a SAP landscape by using DBACOCKPIT, at a customer site. These systems are running on AIX, Windows 2003/2008 servers and attached to the central monitoring system with standalone SAP gateway installations.
One another reason to not use OS based commands or 3rd party tools is security. We are stopping and disabling most of the services on OS where SAP system is running on, because of the security reasons. I faced more security gaps on rsh/ssh and the other tools than standalone SAP Gateway installations. As you can figure out that rsh/ssh is getting more attack than standalone SAP Gateway, because of well known by the IT world.
As a summary of it, this depends to point of view and policy of the IT organization. I applied both ssh and standalone SAP Gateway solutions at my customers, but I choose standalone SAP Gateway installation among of them.
Best regards,
Orkun Gedik

LV2010 and cFP-2120 and remote panel

I have a project in LV2010 for cFP-2220. When I convert the project for a cFP-2120, the remote panel doesn't work. When the browser goes to the IP address it defaults to 192.168.1.2/#Home.

The remote panels and browser control work fine for the 2220. I inserted the 2120 into the project in place of the 2220 and modified the fieldpoint paths in the vis. I upgraded the software on the 2120 using LV 2010. The original program was written for the 2120 in earlier versions of LV. It was updated to LV 2010 and adapted for the 2220 along with program feature updates related to pumps and other necessary system component changes. Maintenance and support of our customers units involves replacing pumps and other components and/or replacing their 2120's. We are trying not having to replace their 2120's.
When we deploy the program as a startup it runs controls and collects data, but the remote panel access with Internet Explorer isn't working. We have tried creating a new index.htm.

Remote System and Remote Key Mapping at a glance

Hi,
I want to discuss the concept of Remote System and Remote Key Mapping.
Remote System is a logical system which is defined in MDM Console for a MDM Repository.
We can define key mapping enabled at each table level.
The key mapping is used to distinguish records at Data Manager after running the Data Import.
Now 1 record can have 1 remote system with two different keys but two different records cannot have same remote system with same remote key. So, Remote key is an unique identifier for record for any remote system for each individual records.
Now whenever we import data from a Remote System, the remote system and remote key are mapped for each individual records. Usually all records have different remote keys.
Now, when syndicating back the record with default remote key is updated in the remote system that is sent by xml file format.
If same record is updated two times from a same remote system, the remote key will be different and the record which is latest contains highest remote key.
Now, I have to look at Data Syndication and Remote key.
I have not done Data Syndication but my concept tell if there is duplicate record with same remote system but different remote keys both will be syndicated back. But if same record have two remote keys for same remote system then only the default remote key is syndicated back.
Regards
Kaushik Banerjee

You are right Kaushik,
I have not done Data Syndication but my concept tell if there is duplicate record with same remote system but different remote keys both will be syndicated back.
Yes, but if they are duplicate, they needs to be merged.
But if same record have two remote keys for same remote system then only the default remote key is syndicated back.
This is after merging. So whichever remote key has tick mark in key mapping option(default) , it will be syndicated back.
Pls refer to these links for better understanding.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/80eb6ea5-2a2f-2b10-f68e-bf735a45705f
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/7051c376-f939-2b10-7da1-c4f8f9eecc8c%0c
Hope this helps,
+ An

Search for [Remote Key] and [Remote System] in Data Manager

Hello all
I would like to be able to search on the remote key and the remote system in the MDM Data Manager is that not possible? I thought I remembered seeing that possibility under the Free-Form Search but now I can't find it.
I have, however, found this in the Data Manager reference guide:
REMOTE SYSTEM AND REMOTE KEY FIELDS
MDM uses the remote systems defined in the Remote Systems table
within the MDM Console to store and maintain key mapping information
for each record or text attribute. It does this using a virtual key
mapping field that you never see in the MDM Client.
This virtual key mapping field is very much like a qualified lookup field
into a virtual key mapping qualified lookup table.
Key Mapping information stored in virtual lookup field
The Remote System and Remote Key fields are normally not visible;
however, they do appear in several places in the MDM Client.
Specifically, both fields: (1) appear in the File > Export dialogs in Record
mode for exporting value pairs; (2) are recognized by the File > Import
dialog in Record mode for importing value pairs; and (3) appear in the
Edit Key Mappings dialogs in both Record mode and Taxonomy mode,
for viewing and editing value pairs.
Is there any way to search on the value in the remote key from the Data Manager?

Not sure search i think not possible.
But you can see keys as mentioned:
Enable Key mapping in Console.
MDM Client maens MDM Data Manager.
They do appear in several places in the MDM Client or Data Manager. Three different methods to see in DM are given already below:
Specifically, both fields: (1) appear in the File > Export dialogs in Record mode for exporting value pairs; (2) are recognized by the File > Import dialog in Record mode for importing value pairs; and (3) appear in the Edit Key Mappings dialogs in both Record mode and Taxonomy mode, for viewing and editing value pairs.
BR,
Alok

Remote Control and Remote View Problem

Hi,
I work at a High School running Netware 6.0 SP5 and Zen works 4.01 ir7.
Remote Control and Remote View works great but I noticed one problem.
We have a logo of the school that is forced down on to the desktop when a
user logs in through group policies. This logo works perfect for the
desktop wall paper and loads every time a user logs in.
When I Remote Control or Remote View a computer the users desktop wall
paper turns from the logo being forced down through group policies to the
desktop to a blue desktop wall paper.
I would prefer the desktop wall paper staying the schools logo when I
Remote Control or Remote View because if the desktop wall paper changes to
the blue color I mentioned above when I Remote Control or Remote View the
users computer, they will know that someone is taking over their computer
which sometimes we dont want them knowing.
We have Windows 98SE computer running Novell Client 3.4 and we have some
computers running Windows XP Professional SP1 and Windows XP Professional
SP2 both running Novell Client 4.91 SP2.
The Remote Control and Remote View problem of the desktop wall paper
changing on the users computer occurs on all operating systems mentioned
above.
Is there a solution to my above problem? When Remote Controlling and
Remote Viewing someone's computer I don't want the desktop wall paper to
change.
Thanks!

Bpilon,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Unplugging all network devices from Fios router prevents DVR freezing and remote control lock ups.

All,
I recently had a Verizon tech visit my house due to constant DVR and remote control freezing. TV content was freezing whether it was locally recorded, pulled from another DVR in the house, or On Demand. On a hunch after the tech tested everything and was about to leave, he unplugged my gigabit switch from the Fios router. Lo and behold everything started running perfectly. Since to the tech, the problem was solved, he closed the case and was on his way. The probem is of course I have more devices than the built in router switch provides ports for. My network is compised of an 8 port Netgear gigabit switch downstream from the Fios router with two wireless access points (with their own built in gigbait switches) connecting to the Netgear gigabit switch. There are no loops in the switch topology. I've tried changing out the router, the gigabit switch, removing the wireless acces points individually as well as plugging the access points directly into the Fios router switch (one at a time with no Netgear switch in the middle) and all scenarious cause the DVR/remote control freeezing to come back. The only devices I can plug into the Fios router without causing freezes are PC's....anything with it's own switch essentially brings the network to it's knees. If anyone has an idea how to get my network back in one piece AND make the DVR's/remotes behave, I'd greatly appreciate the help!
My Fios equipment:
MI-424WR GEN-3I rev I (eye) running firmware 40.19.36
5 Motorola HD-DVRs all QIP 7232-2 running software release 1.9.1 platform build 25.39 (Oct. 22, 2012)
Specific config:
75/35 Fios connecting via ethernet from ONT. Set-top boxes connect to Fios router coax port via powered splitter.
*All SNR/dB mesasurements taken by the tech from the set-top boxes and router are well within spec.
Fios router provides DHCP addressing. Wireless N access points are configured for roaming with the same SSID and non-overlapping channels. Access points are not providing routing or IP adressing...all layer 3 and up services still provided by Fios router
Diagram:
ONT
|
Fios Router ---------Cable Splitter---------Set Top Boxes
|
Netgear Switch
|           |
WAP1    WAP2

WayfarerII wrote:
... DVR ... remote ... freezing ... TV ... whether ... locally recorded, pulled from another DVR ...
... tech ... unplugged my gigabit switch from the Fios router ... and ... everything started running perfectly ...
... config:
75/35 Fios ... via ethernet from ONT ... Set-top boxes connect to Fios router via powered splitter ...
ONT
|
| cat5
|
Fios Router ---------Cable Splitter---------Set Top Boxes
|
Netgear Switch
|           |
WAP1    WAP2
I am inclined to echo several of the "tns" comments, particularly with respect to your splitter. My layout is based on a standard 8-port splitter of the type usually supplied in a VZ install. In addition I do have a ChannelPlus device that functions as a powered splitter, but its use is limited to distribution of secondary TV signals to older analog TVs. My first point then is that this may be an offender as "tns" has suggested.
In addition, I'd describe your wiring as "non-standard" (red-colored items in the above diagram)  As you're no doubt aware, with 75/35 you don't really need Cat5e from the ONT (your original diagram). It seems the highest tiers do require it, but in "standard" installations this run is coax directly to an 8-port non-powered splitter (below diagram), then from that splitter via coax to all STBs and CableCards, other TVs, et.), and also to the Actiontec.   Subsequent feeds from the Actiontec to wired devices (including WAPs) are via Ethernet (typically Cat 5e).
In fact I don't immediately see how your STBs get additional services such as On Demand and IMG with the wiring shown in your diagram (perhaps someone can help me out here). In "standard" installs the Actiontec must be connected via coax to the ONT to provide such services to other network clients. I don't see that requirement being met here.
For starters I'd recommend that you change your service from WAN Ethernet to WAN coax. This can easily be accomplished over the telephone. Then I'd run coax directly from the ONT to the Actiontec as in my revised diagram below (blue-colored items). If your setup can manage with this arrangement, I think it will help greatly with the "freezing" issue.
ONT - - - - - - coax - - - - -
                                         |
Fios Router --- coax--- Standard 8-Port Splitter --- coax --- Set Top Boxes
|cat5
Netgear Switch
|cat5          |cat5
WAP1 WAP2
Subsequent Note: You provided additional info while I was composing a response, and I'd like to offer another comment. Structured wiring "panels" of the type usually available are pre-configured to provide data, phone and video. This usually means that one is in certain respects limited by the ideas of the panel designer. I have what can be called a structured wiring layout, but it really is composed of individual small custom networks for each service (automation, security, video, data, telco, etc.), configured so that all wiring terminates in "home run" fashion at a central panel (a few details here: http://forums.verizon.com/t5/Home-Networking/Cmon-Show-Us-Your-Network/m-p/481733#M765 ). This layout makes it easier to make adjustments (and there have been quite a few over the intervening years). I'm thinking that in your case you may have to abandon the powered splitter (presumably) built into the panel in order to avoid your present fix.
Subsequent Subsequent Note:   From your description it seems that you are using more than a single "whole house" DVR to supply programming to other devices. This is a bit puzzling to me because somewhere along the line I recall reading that only a single whole house DVR was allowed on the network. Can you elaborate a bit?

Hp laserjet pro m1217nfw and remote desktop printing

hp laserjet pro m1217nfw and remote desktop printing, is there any issues with said function?

whats the problerm you are having??

Cannot login to Cisco Jabber 10.5.1 over Mobile and Remote Access

Hi,
We have deployed sucessfully VCS Expressway-C and VCS Expressway-E with only 1 zone which is "Unified Communication Traversal" and is for Mobile and Remote Access only. VCS-C and VCS-E are communicating and in statuses everything is active and working. Also VCS-C can communicate with CUCM and CUP (both version 10.5).
Problem is when I deploy Cisco Jabber 10.5.1 on computer outside of LAN and without VPN it start communicating with VCS-E, ask me for accepting certificate (we have certificate only intenally generated on Windows CA) and after that it is trying to connect and after few seconds it will tell me that it can't communicate with server.
Did any of you had same problem or can you advice how to troubleshoot? In Jabber logs there is only something like "Cannot authenticate" error message, but when I startup VPN I can authenticate without any problems.
Thanks

On Expressway-C are your HTTP Allow Lists setup properly? By default, and auto discovered CUCM and IMP should be listed via IP and Hostname, but if not, you'll need to insert manually.
Also, you can look at the config file your Expressway-E would be handing out to Jabber via this method.
From the internet, browse to:
https://vcse.yourdomain.com:8443/Y29sbGFiLmNvbQ/get_edge_config?service_name=_cisco-uds&service_name=_cuplogin
Where:
vcse is your Expressway-E hostname (or CNAME/A record)
yourdomain.com is your own domain
The first directory is your Base64 encoded domain name, remove and trailing equal signs (=)
The XML returned is basically the DNS SRV record information available as if internal for _cisco-uds and _cuplogin
TFTP DNS SRV is optional if you configured TFTP in IMP for your Legacy Clients.

AMFPHP and remoting components

Similar Messages

Maybe you are looking for