AMFPHP and Site

Way of knowing if this site www.carmotors.com.br uses AMFPHP?

Hey Sky,
I am personally using AMFPHP. It is a little outdated but for small to medium sized project I found out that it works very well. Also AMF is a little smaller and is faster in some cases.
Now Zend is much more robust and also updated and current. I have it installed as well and I think I might migrate my stuff eventually.
So I would go with Zend if you have to start from scratch. I you are already using AMF then I don't think it's worth the effort on migrating unless you're working on some large scale project.
But then that's just my personal opinion.

Similar Messages

  • "Setup encountered a problem while validating the state of Active Directory: Exchange organization-level objects have not been created, and setup cannot create them because the local computer is not in the same domain and site as the schema master. Run se

    Team,
    I am trying to Install Exchange on my Lab, getting below error
    message.
    The Schema Role is installed on Root Domain and trying to install
    exchange on Child domain.
    1 Root Domain - 1 Child domain. both are located on single site.
    “Setup encountered a problem while validating
    the state of Active Directory: Exchange organization-level objects have not been created, and setup cannot create them because the local computer is not in the same domain and site as the schema master. Run setup with the /prepareAD parameter and wait for
    replication to complete.”
    Followed below articles:
    http://support.risualblogs.com/blog/2012/02/21/exchange-2010-sp2-upgrade-issue-exchange-organization-level-objects-have-not-been-created-and-setup-cannot-create-them-because-the-local-computer-is-not-in-the-same-domain-and-site-as-the-sche/
    http://www.petenetlive.com/KB/Article/0000793.htm
    transferred the schema roles to different server on root domain, still no luck.
    can someone please help me.
    regards
    Srinivasa k
    Srinivasa K

    Hi Srinivasa,
    I guess, you didn't completed the initial setup schemaprep and adprep before starting the installation. You can do it as follows:
    1. Open command Prompt as administrator and browse to the root of installation cd and run Setup.exe /PrepareSchema /IAcceptExchangeServerLicenseTerms
    After finishing this,
    2. Setup.exe /PrepareAD /OrganizationName:"<organization name>" /IAcceptExchangeServerLicenseTerms
    3. To prepare all domains within the forest run Setup.exe /PrepareAllDomains /IAcceptExchangeServerLicenseTerms. If you want to prepare a specific domain run Setup.exe /PrepareDomain:<FQDN of the domain you want to prepare> /IAcceptExchangeServerLicenseTerms
    4. Once you complete all of the 3 steps, install the pre-requisities for Exchange 2013
    5. Finally, run the setup program
    Hope this will help you
    Regards from Visit ExchangeOnline |
    Visit WindowsAdmin

  • When editing an image in Photoshop from Lightroom then saving it back to Lightroom, how do i get the image to go back and  sit next to the original? Mine is going to the end of the folder. Thanks Karen

    When editing an image in Photoshop from Lightroom then saving it back to Lightroom, how do i get the image to go back and sit next to the original image? Mine is going back to the end of the folder. Thanks Karen

    Hi Karen
    You may the sort set to Custom. Click the dropdown menu on the toolbar (to the right of the word sort) and change to capture time.
    If you can’t see the toolbar above the filmstrip press the T key. Press T again to hide.

  • Log location for the DP having only "Distribution point" and "site system" installed

    Hi
    I have one SCCM DP 2012 server. that have only "Distribution point" and "site system"  role installed.
    Is the log will be generated on primary server?  I am not able to find the log on this server.
    Please help me in this.
    Regards, Shishir Kushawaha "If this thread answered your question, please click on "Mark as Answer"

    HI,
    You will have it in a folder called \SMS_DP\sms\logs, you can also see information about package transfers in the primary site server in the distmgr.log and pkgxfermgr.log files .
    Regards,
    Jörgen
    -- My System Center blog ccmexec.com -- Twitter
    @ccmexec

  • I need block a particular site, just like in IE when i goto Privacy option I can specify and site & say Block - where can i find thi s in firefox?

    I need block a particular site, just like in IE when i goto Privacy option I can specify and site & say Block - where can i find thi s in firefox?
    I've been getting some junk websites while I am working. I need to block them completely.
    Please advise. Thanks,

    There is no equivalent in Firefox. You can use the [https://addons.mozilla.org/en-US/firefox/addon/3145/ BlockSite] extension to add a similar feature.
    If the junk sites are coming up whilst you are browsing, this may be caused by malware. You should consider scanning your computer with some malware programs. It is best to run several as each will pick up things that the others miss. Some scanners you can try are:
    * [http://www.malwarebytes.org/mbam.php Malwarebytes]
    * [http://www.superantispyware.com/ SUPERAntiSpyware]
    * [http://www.lavasoft.com/products/ad_aware_free.php Ad-Aware]
    * [http://www.microsoft.com/windows/products/winfamily/defender/default.mspx Windows Defender]
    * [http://www.safer-networking.org/en/home/index.html Spybot S&D]

  • Upgrade Content Server and Site Studio

    Hello Everyone,
    We are trying to upgrade both Content Server and Site Studio from 7.1 / 7.2.1 to
    10gR3
    1) Instead of updating existing instance we Installed new 10gR3 instance
    Exported folder structure archive, layout files and data files from old instance
    2) Imported into new 10gR3 instance.
    3) Tried to upgrade sitestudio websites
    4) Its created a project file but not adding any SiteStudio section properties
    (ex. primaryURL, secondaryURL, IncludeSectionInNavigation etc.), if I open the site in
    designer, it shows just blank site structure without any templates associated and all sections are disabled.
    Any ideas on this??
    Venkat

    Hi ,
    If you are displaying the data from spaces only then all the operations like creating a web content , editing it etc can be done from Webcenter spaces itself .
    Thanks
    Srinath

  • Is there any REST API to get all the Site and site Collections from Sharepoint Online

    Hi,
    I have one SharePoint Online tenant. We are using REST API to integrate SharePoint to our internal System.
    For my use case I need to get all the SharePoint sites ans Sitecollections. From each SiteCollection I need all the subsites under this.
    I have used below REST Query
    http://<Base site url>/_api/web
    This doesn't give me all the Site collections
    Could any one please give me some way to get all the Site collections and sites from my sharepoint tenant through REST API.
    Thanks,

    Hi Abhiram,
    There seems no such endpoint in SharePoint REST API can retrieve a list of site collections in a SharePoint Online tenant:
    https://msdn.microsoft.com/en-us/library/office/jj860569.aspx#Reference
    If Client Object Model can be an option for you, you can use Tenant object to achieve what you want:
    http://social.technet.microsoft.com/wiki/contents/articles/24050.perform-basic-admin-operations-using-csom-in-sharepoint-online.aspx#Scenario_3_Fetch_All_Site_Collections
    Anyway, I would suggest you submit a feedback to the Office Developer Platform if there any expectation about the future version of REST API of Office 365 SharePoint
    Online:
    http://officespdev.uservoice.com/
    It
    is a place for customers provide feedback about Microsoft Office products. What’s more, if a feedback is high voted there by other customers, it will be promising that Microsoft
    Product Team will take it into consideration when designing the next version in the future.
    Thanks 
    Patrick Liang
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • How to block domain and sites by keyword

    Hello,
    I have installed Linksys BEFW11S4 router, and now want to block some domain and sites with specific keywordsm how how It is possible, I have check there are no access restriction option, and also how to access only admin all sites, please let me know.
    Thanks in advance,
    Laxmilal

    You might have older firmware on router. Download latest firmware from www.linksys.com/download and update it. You will get access restrictions tab.

  • Need script to automate creation of AD sites,subnets and site links

    Hello,
    I have a requirement to create hundreds of sites and thousands of subnets in AD and also site links. I have an excel file with the details. 
    Can somebody help me with a vbscript/powershell script to automate this and create all the AD sites, subnets and site links
    Any help will be highly appreciated.
    BR,

    Hi AD-learner,
    As Santhosh said, you can get the scripts from the Script Center.
    I have made a quick search for you on the scripts for importing AD sites, subnets and site links.
    Checkout the below link on the powershell scripts to import, 
    AD Sites from a CSV file
    AD Subnets from a CSV file
    AD Site links from a CSV file
    Regards,
    Gopi
    www.jijitechnologies.com

  • Exchange Server 2013: Deploying High Availability and Site Resilience

    Dear All,
    I'm planning to Deploying High Availability and Site Resilience.
    I have two data center and I have one exchange server on each site (multi-role).
    I want to deploy Database Availability Group.
    Is it possible? any idea?
    in addition, all clients is connected to their email to their own site. dose it has any affected to Outlook users?
    KH
    [email protected]

    Hi MAS,
    Currently, I have only mailbox server and only database for each site. 
    + Site1: I has DB1 and all users in site1 will access to their own site. (MBX1) subnet 192.168.1.0/24
    + Site2: I has DB2 and all users in site2 will access to their own site. (MBX2) subnet 192.168.2.0/24
    But the email for incoming and outgoing with external will go to Site1.
    In Planning,
    I want to implement DAG to provide HA on database level below:
    Is it possible to do that? dose it has any affected to current Outlook users?
    BR,
    KH
    [email protected]

  • My new tab page displays only an empty grid. Missing thumbnails -and- sites. I -think- my settings are correct. Please advise.

    My new tab page displays only an empty grid. Missing thumbnails -and- sites. I -think- my settings are correct. Please advise.

    What are the settings for clearing history when Firefox closes?
    Make sure that you do not clear the Browsing Cache as that will remove the thumbnails that are stored in it.

  • Why are my tabs above my bookmarks and site bar thing now?

    the main reason i used firefox was the tabs were where i like them now theyre up top like google chrome and i hate it, please make it an option to put them back below my bookmarks and site bar thingy.

    Right-click one of the Toolbars and de-select '''Tabs on Top'''.

  • My iphone safari history, my 'reading list' shows visits and sites that I have never frequented. A few months back the same thing happened with my youtube history.  My phone is pass protected, so its just me using it. any ideas?

    My iphone safari history, my 'reading list' shows visits and sites that I have never frequented. A few months back the same thing happened with my youtube history.
    My phone is pass protected, and its just me using it, phone with me all the time. any ideas?
    How can things be added to my reading list/youtube???

    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable                     
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar
    The missing apps could have been done by setting the Restrictions that can hid those apps. If the backup was made with those retrictions set the the Restrictions are also restored.
    Thus, if you get it to work restore to factory settings/new iPod, not from backup                               
    You can redownload most iTunes purchases by:        
      Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • HT4623 just updated my iPhone 4s to ios6, now my phone won't turn back on. The apple logo comes on and sits then shuts off. I have held down the home button and on/off switch several times to reset, but same problem persists.

    just updated my iPhone 4s to ios6, now my phone won't turn back on. The apple logo comes on and sits then shuts off. Then comes back on and just sits.I have held down the home button and on/off switch several times to reset, but same problem persists.

    Place iPhone on Wall Charger for at least 10 minutes. Then keep on charger and Reset, hold both home and power buttons until the iPhone begins to start, this can take about 20 seconds of holding both buttons while on charger. If still problem, open iTunes 10.7 on computer, connect iPhone to computer with USB Cable, hold both home and power buttons for about 20 seconds until iTunes recognizes iPhone in Recovery Mode, then click Restore button of iTunes. If still problem, try DFU Mode Restore, here are the steps. Open iTunes on computer. Connect iPhone to computer with USB cable. Hold both Home and Power buttons, after exactly 10 seconds release the Power Button, keep holding the Home button until iTunes recognizes iPhone in Recovery Mode, usually about 20 seconds time. If the iPhone screen is black, blank this is DFU Mode. Click the Restore button of iTunes. DFU Mode can be difficult to enter sometimes, just keep trying. DFU Mode is a black, blank screen with iTunes saying Recovery Mode. If still problem and there is Warranty or AppleCare make Genius reservation and take to Apple for resolution.

  • What is meant by article grouping and site grouping and how to define

    what is meant by article grouping and site grouping and how to define in SAP.

    Hi Charan,
               Article Grouping in its broader sense  means grouping of Articles for ease of maintenance and business functions, either on the basis of Hierarchy or on the basis of Merchandise Category.Article Grouping is also primarily useful in promotions,wherein you can define a set of articles(which may not necessary fall under the same MC or Hierarchy) and club them together and assign them in a promotion.Txn codes used are : VBG1/2/3 - Create/Change/Display Article Group
    For more information refer the link below
    http://help.sap.com/saphelp_47x200/helpdata/en/12/08485c470311d1894a0000e8323352/frameset.htm
    Site Grouping is used for ease of maintenance by grouping the sites.It is also used to maintain the characteristics as well.This can also be used in Allocation Tables,promotion and Listing etc
    Some of the Txn codes -
    WB50 - Site Group,Create Alloc,.table
    Wb56 - Site Group, Alloc.table,Maintain Sites in Class
    WB60 - Site Group,Create Promotions
    WB64 - Site Group,Maintain SItes to Class
    Wb80 - Create Site Group Other
    For more information,refer the link below
    http://help.sap.com/saphelp_47x200/helpdata/en/12/08485c470311d1894a0000e8323352/frameset.htm
    Hope it helps
    Rgds,
    Aram K.
    For more information refer to the link below

Maybe you are looking for