Amount in Words using SPELL_Amount in Arabic Smart-forms

I am facing the difficulty during the step in smartform printing. Client is to have a printout in Bi-lingual (english+arabic), Arabic is printing fine. The maintenance language of smartform is arabic.
Problem arises:
I am using the function SPELL_AMOUNT to get the "Amount in Words" of Gross Value. In the print preview and printout, "Amount is words" are appearing as jumbled. for example,
Gross Value 238,476.00 SAR
Expected Amount in Words Two Hundred Thirty-Eight Thousand Four hundred Seventy-Six.
Appearing Amount in Words Seventy-Six Two Hundred Thirty-Eight Thousand Four Hundred.
Waiting for your valuable inputs.

Hi,
Try the below code:
Pass the amount after Decimal to the Spell amount seperately and then concatenate the two parts of the amount.
For example : 30.60 USD
Store the amount in a character string. Split the string at decimal point using a SPLIT statement.
DATA: amount_total(10),
round(7),
dec_part(3).
DATA: dec(1) TYPE c VALUE '.',
amount_total = '30.69'.
SPLIT amount_total AT dec INTO round dec_part.
First pass variable 'round' to Spell_amount and then in the second call pass variable 'Dec_PART' and concatenate the two results.
Regards,
sirisha.

Similar Messages

Urgent -- using Standard text in SMart forms

Hi Techi's.
I have created a standard text using SO10 , and included the same in smartform.
But the requirement is , i need to change the format of the standard text with my own style, so i craeted a Smart style with relevant Paragraph and Character formats.
Plz help me out in linking the STandard text with the smart style.
I know how to include smart style in smart form, but the issue is "how to include Smart style for the created Standard Text ".
Urgent and helpful answers will be rewraded.
Regards,
Naveen

hi naveen
for Smartforms material
http://www.sap-basis-abap.com/sapsf001.htm
http://www.sap-press.com/downloads/h955_preview.pdf
http://www.ossincorp.com/Black_Box/Black_Box_2.htm
http://www.sap-img.com/smartforms/sap-smart-forms.htm
http://www.sap-img.com/smartforms/smartform-tutorial.htm
http://www.sapgenie.com/abap/smartforms.htm
How to trace smartform
http://help.sap.com/saphelp_47x200/helpdata/en/49/c3d8a4a05b11d5b6ef006094192fe3/frameset.htm
http://www.help.sap.com/bp_presmartformsv1500/DOCU/OVIEW_EN.PDF
http://www.sap-img.com/smartforms/smart-006.htm
http://www.sap-img.com/smartforms/smartforms-faq-part-two.htm
Re: Need FAQ's
check most imp link
http://www.sapbrain.com/ARTICLES/TECHNICAL/SMARTFORMS/smartforms.html
step by step good ex link is....
http://smoschid.tripod.com/How_to_do_things_in_SAP/How_To_Build_SMARTFORMS/How_To_Build_SMARTFORMS.html
regards
ravish
plz dont forget to reward points if helpful

Using SET COUNTRY in SMART forms

Hi All,
We have used SET COUNTRY 'GB' in the smart forms initialization code editor.
But it is not reflecting currency formats & date formats in the country specific formats.
I have to change the setting only in smart forms code only as i will not be able to edit print program.
can any body solve this issue!
Any system setting we need to do!
Thanks in advance.
Thanks,
Deep.

hi..
U can change the settings in SU01.
give ur username.
Change in DEFAULTS tab, in Decimal Notation field.
regards,
Padma

Using alternative option in SMART forms

hi,
I have a quick question about using the alternative window in Smartforms.
When the condition mentioned is true, all the objects/windows under the true will be executed. However, when the condition is false nothing gets done. I would expect all the objexcts in the False category to get executed. Can anyone reason this out.
Regards,
Diwakar

the situation is as follows:
If v_x = 'Del' the title of the report needs to be as "Delivery Note", else it needs to be as "Invoice".
So, after coding the condition using the alternative option, i have placed two text elements each under true and false. If V_x is 'Del' i see the title delivery note in the report. however, if i chaneg the value of v_x, i am not able to see 'invoice ' as the title. The output is blank.

How to use address node in smart forms

hii all,
can any one tell me how to print the address usin the address node in smartforms....pls explain me in detail...
thank you.

Hi Neelima,
Create a Address Node to print the addres of particular object like vendor, customer, plant, company address etc...
for example vendor address
To Print the address, you need to declare a variable VENDOR_ADRNR TYPE ADRNR in Form interface Import Parameters.
Get the Vendor Address Number from LFA1 Table and pass the value to the form interface parameter when you call the smartform function module in the print program.
Pass this to Address number &VENDOR_ADRNR& in the address number field, then the system will get the address of the vendor automatically.
Regards,
Satish

Converting amount to words

how can i convert amount to words using sql query
eg : Rs 10234.50
Ten Thousand Two Hundred Thirty Four Rupees Fifty Paise

Perhaps the forum admin need to put the search box right next to the Create New Message button just so people get the idea that what they're asking for just may have been asked for previously by other people.As when creating a new SR in Metalink: Before posting you'll be asked to to search the bug db, knowledge base, technical forums ...etc ...
Not really a bad idea actually ...

Smart form where used list

Hi All,
I want to change a smart form interface, before that I have to know where used list of this smart form but I can't. Could any one tell me how I can see the where used list of smart form.
thanks in advance
chetan vishnoi

Hello,
the previous suggestions won't work because smartforms are usually used with a dynamic function call.
I have the following suggestions:
1) Go to SE37 and display the where-used list of function SSF_FUNCTION_MODULE_NAME. Now find the entries where input parameter FORMNAME equals the name of your smartform.
2) Change the interface of the smartform such that it is still compatible to the previous version, i.e. all new parameters are optional. If you want to change the type of a parameter, create a new parameter instead. You could then alter the coding in the following way:
IF NOT parameter_old IS INITIAL.
MESSAGE 'Interface has changed' TYPE 'E' RAISING ERROR_OCCURRED.
ENDIF.

How to Print Digital Signature in Smart forms.

Hi Experts,
Any one please help me how to use digital signatures in SMARTFORMS.?
Which are the tables used to store digital signatures and please any one have any demo program which prints the the digital signature using smartforms kindly let me know.
Thanks,
Sunil kairam.

Hi Sunil,
After doing some research in sdn and other sources i found the following result...
Digital Signatures are nothing but graphics that we can store in SAP and use in our Smart Forms.
For Example you can create a .bmp file of your signatures, upload it via SE78, and then use it in your Smart Forms in your Footer Area as "Authorized Signatory".
The Logic in the Print Program can be something as follows -
1. Maintain a Z Table having fields like PLANT, FORMID (Name of the SmartForm), USERID.
2. Before calling the Form, the validation is made for the Logged in User with the Z Table created.
3. If the User Entry exists in the Z-Table, the Form is called and the Signature Image is displayed in the Footer Block i.e. the Authorized Signature.
4. If user entry does not exist in the Z-Table then the message is displayed "You are not the Authorized for Printing the Form" and exits the Transaction.
refer to these links:
[http://help.sap.com/saphelp_nw04s/helpdata/en/23/c8b4cb4b3847a9bc32fe100f368411/frameset.htm]
[http://help.sap.com/saphelp_nw04/helpdata/en/21/530b37cb3ed605e10000009b38f936/frameset.htm]
if u find some info on the topic pls let me know..
best of luck!!!
thanks
ravi

Text issue in Smart form

Hi All,
I have an Custom smart form, and under the pages and windows i have 2 Pages First Page and Next page.
The First Page next page is set as Next Page and the second page next page is also set as Next page.
Now when the Smart form is displayed in the PDF Format then only the first page Header comes in the proper way but the 2nd , 3rd and so on pages depending upon the data the Headers are all coming as an Junk text (Not some other language but the overlapping of characters).
The Header texts are all in the Table in the header field and also some texts are dynamically populated by the OTR and some are static.
I am not sure why is this happening can any one give me some inputs?
Regards,
Dipu

Exactly thats what i am using now but want to know whether is it possible by using TEXT instead of creating Graphics node.
In graphics we can use both .bmp as well as .tif files but not text.So what is the solution of using TEXT Ids in Smart forms.
Thanks for all your answers but still i didn't get the solution to my problem.
Regards,
Chandra

How to display the text as a Bold in the Text Element of a Smart Form

Hi,
I created one Smart Form.
In that i created the Text element.
I provide some data also in that.
It is coming as a MS WORD.
I executed my smart form.
Customer Number: &WA_KNA1-KUNNR&
it display the data of the particular customer.
But i need to display the Customer Number as BOLD or else Increase the Size.
For this also I created one SMARTSTYLE.
In that I created the Paragraph and Character Formats also.
Now i assignee that SMARTSTYLE in the Output Option Tab of the Text Element also.
But i unable to get the CUSTOMER NUMBER in Bold.
In MS WORD we have BOLD button.
I selected the Text and Press the BOLD button. At that time it is Highlighted.
Whenever i press the SAVE Button.
Then it is not saved with BOLD.
It is coming in Normal Format.
In the ECC 6.0. I am unable to get the Text as a BOLD.
This text Element is like a MS WORD.
Can you please tell me how to display the Data with BOLD. please tell me. I am unable to get that one.
Thank You.
Regards,
B. Krishna.

Hi,
Check where u have given BOLD. In character Format or in Paragraph format.
In SMART FORM,
1. Change to OLD EDITOR if u are confused with the new one.
 (This can be done by clicking the button left to new editor ).
2. If it is PARAGRAPH FORMAT,
 Give the name of paragraph format in the editor.
 P1 &WA_KNA1-KUNNR&
 If it is CHARACTER FORMAT,
 <C1> &WA_KNA1-KUNNR&
Thanks,
Nithya.

Smart form - Long text in all the items?

Hello gurus,
We are using something similar to smart form (I don't know the exactly name, like pretty form).
So, we are using a long text in the "Item text" by item.
Sometimes the item can be more than 20 lines in the "Item text" as long text and sometimes not.
Example: I have a PO with 4 items:
Item 1 - Without Item text.
Item 2 - With 20 lines in the Item text
Item 3 -With 1 line in the Item text
But, when the PO is printed, the PO form has to all the items 20 lines by item.
That's mean that if in the first item I don't have item text, the first item is showed with a very long space in blank (space of 20 lines).
The secont item is showed correctly.
The third item has one line wrote and 19 lines in blank, like a long space in blank.
How we can manage this situation in the format?
How we can program these spaces to see in the format to the first item without the space in blank and to the third item only 1 item and the other 19 lines without being shown?
Can you help me please a.s.a.p.?
Thanks for your time and I will wait the answer.
Regards,
Sandra Palomo

Hi ,
Can you please let me know the solution implemented ?

Query regarding smart form

hi all
how to use existing purchase order smart form...whats the name and whats the print program for that.
rgds
anu

Smartform of PO....
check this thread.
in ECC5.0 smartform name : /SMB40/MMPO_DE.
for smartforms,you no need to have a seperate print program.total logic will be inside of the smartform(function module).
Regards,
Srikanth.
Message was edited by: Srikanth Kidambi
Message was edited by: Srikanth Kidambi

SAPscript and Smart Forms - Going to be phased out?

Thus far, are SAPscript and/or Smart Forms going to eventually be retired? Is there an official document, or Note that says so? I've exhaustively searched through these forums, and the SMP for the PAM and Notes, but I can't find a reference anywhere that will tell me.
I did find where it says:
"Customers can continue to use existing SAP forms solutions such as Smart Forms and SAPscript.
Both solutions will continue to be supported in their current functional scope."
Just want to make sure with my clients.
Thanks!

Hello,
We recently rolled out an SAP's Strategy as far as forms development is concerned.
Here is the official statement:
"The SAP forms strategy is based on SAP Interactive Forms by Adobe (IFbA). This applies to both print and interactive forms. In this context, most Business Suite solutions have already been converted to the IFbA technology (more than 2300 forms), and new standard SAP forms will be created using IFbA instead of Smart Forms or SAPscript.
SAPscript and Smart Forms shall continue to be supported inline with SAP's maintenance strategy, thereby ensuring the ability to protect existing customer investment."
You can also find this on the Smart Forms page in SDN: Smart Forms Overview
Regards,
Nikhil

Triggering a smart form from User exit

Hi Gurus,
I need to trigger a smart form from a user exit.
The tcode name is COR1.there is a exit for this tocde.
This exit should be used to trigger the smart form.
User exit to be executed upon saving the Process order number.
Thanks in advance.
Edited by: vinay raj on Apr 13, 2009 9:38 AM

Hi,
You can write a Custom program i.e. the driver program for your smart form.
And submit that program in the exit. i.e. use the submit statement to run that program.
I hope this might help you.

Smart form and Jet form

Hi,
Please let me know the difference betweeen Smart form and jet form and in which scenarios we use them.
thanks

HI,

Smart forms
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/formPrinting-SAPscript,Smartforms&
Smartforms: Frequently Asked Questions
What are the differences between SAP Scripts and Smartforms?
How can I insert symbols in Smartforms?
I have a smartform which works fine in DEV. After trasnsporting it to PROD, there is no Function module generated for this smartform. As a result my program dumps in PROD?
How can I make the Smartforms to choose a printer name by default?
How can I make the Smartforms to display a print preview by default without displaying the popup for print parameters?
How can I display the total number of pages in Smartforms?
How can I display the total number of pages in Smartforms?
I'm using the variable SFSY-FORMPAGES, I get a star "*" instead of the total number of pages.
What are the various text formatting options in Smartforms?
How can I provide a background shading to the table?
Where can I provide the input parameters to the smartform?
Where can I define my own global types for the smartform?
I have defined my own Program Lines, where I have used a global variable G_TEXT. I get an error G_TEXT is not defined?
I have created a table node for display. Where can I check the condition which must satisfy to display the table?
How can I define Page Protect in Smartforms?
What is the difference between Template and Table in Smartforms?
Where can I define the paragraph and character format for the smartforms?
What are the differences between SAP Scripts and Smartforms?
SAP Scripts are client dependent whereas Smartforms are client independent.
SAP Scripts require a driver program to display the output whereas in smartforms the form routines can be written so that it is standalone.
An integrated Form Builder helps to design Smartforms more easily than SAP Scripts
An Table Painter and Smartstyles to assist in building up the smartforms
On activation a function module is generated for Smartforms
It is possible to create a Smartform without a main window
Smartforms generates XML output which can be viewed through the web
Multiple page formats is possible in smartforms
How can I insert symbols in Smartforms?
Select the Text node.
Change Editor (Click the button above Check near the Editor)
Go to menu Include->Characters->SAP Symbols
Choose the SAP symbol that you want to insert.
I have a smartform which works fine in DEV. After trasnsporting it to PROD, there is no Function module generated for this smartform. As a result my program dumps in PROD?
The Smartform that is created in the Development may not have the same name in the Production server. So it is always advised to use the Function Module SSF_FUNCTION_MODULE_NAME to get the Function Module name by passing the Smartform name.
DATA: fm_name TYPE rs38l_fnam.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
 formname = 'ZSMARTFORM'
IMPORTING
 fm_name = fm_name
EXCEPTIONS
 no_form = 1
 no_function_module = 2
 OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
CALL FUNCTION fm_name
EXCEPTIONS
 formatting_error = 1
 internal_error = 2
 send_error = 3
 user_canceled = 4
 OTHERS = 5.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.How can I make the Smartforms to choose a printer name by default?
In the CALL FUNCTION of the Smartform Function Module, set the output options parameter to set the printer name.
The output options is of the type SSFCOMPOP which contains the field TDDEST. Set the TDDEST field to your default printer name.
How can I make the Smartforms to display a print preview by default without displaying the popup for print parameters?
In the SSF_OPEN function module,
Set the OUTPUT OPTIONS paramter TDDEST to your printer name.
Set the CONTROL PARAMETERS and control parameters as shown below,
control-preview = 'X'.
control-no_open = 'X'.
control-no_close = 'X'.
control-no_dialog = 'X'.
control-device = 'PRINTER'.
control_parameters-no_dialog = 'X'.
control_parameters-no_open = 'X'.
control_parameters-no_close = 'X'.
OUTPUT_OPTIONS-TDDEST = 'PRINTER NAME'.
OUTPUT_OPTIONS-TDNOPRINT = 'X'.
CALL FUNCTION 'SSF_OPEN'
EXPORTING
 output_options = output_options
 control_parameters = control
 user_settings = ' '
EXCEPTIONS
 formatting_error = 1
 internal_error = 2
 send_error = 3
 user_canceled = 4
 OTHERS = 5.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.How can I display the total number of pages in Smartforms?
Use SFSY-FORMPAGES to display the total number of pages in the Smartforms
&SFSY-PAGE& Current page number
&SFSY-FORMPAGE& Total number of pages in the currently formatted layout set
&SFSY-JOBPAGE& Total number of pages in the currently formatted print request
&SFSY-COPYCOUNT& Original-1,1st copy-2
&SFSY-DATE& Date
&SFSY-TIME& Time
&SFSY-USERNAME& Username
I'm using the variable SFSY-FORMPAGES, I get a star "*" instead of the total number of pages.
There may not be enough space in the window to display the variable, either increase the window dimensions or condense the spaces using &SFSY-FORMPAGES(C)&
What are the various text formatting options in Smartforms?
&symbol(Z)& Omit Leading Zeros
&symbol(S)& Omit Leading Sign
&symbol(<)& Display Leading Sign to the Left
&symbol(>)& Display Leading Sign to the Right
&symbol(C)& Compress Spaces
&symbol(.N)& Display upto N decimal places
&symbol(T)& Omit thousands separator
&symbol(R)& Right justified
&symbol(I)& Suppress output of the initial value
How can I provide a background shading to the table?
In the Table Painter, you can specify the color and shading for the table lines.
Where can I provide the input parameters to the smartform?
The input parameters for the smartform can be defined in Global Settings->Form Interface.
The Associated Type must be defined in the ABAP Dictionary.
Where can I define my own global types for the smartform?
The global types(within the smartform) can be defined in Global Settings->Global Definitions->Types
The types defined here will be global through the entire smartform.
Also the form routines can be defined Global Settings->Global Definitions->Form Routines
I have defined my own Program Lines, where I have used a global variable G_TEXT. I get an error G_TEXT is not defined?
Whenever using the global variables in the Program Lines, enter the variable name in Input Parameters if you are going to use(read) the variable. If you are going to both read/write the variable value enter the same in Output Parameters.
I have created a table node for display. Where can I check the condition which must satisfy to display the table?
The conditions can be defined in the Conditions tab. In smartforms all the nodes have a condition tab where you can specify the condition to be satisfied to access the node.
How can I define Page Protect in Smartforms?
To define Page Protect for a node go to the Output options and check the Page Protection checkbox.
What is the difference between Template and Table in Smartforms?
The Template contains a fixed number of rows and columns, where the output is fixed.
The Table can have variable number of rows
Where can I define the paragraph and character format for the smartforms?
The paragraph and character format for the smartforms can be defined in the transaction SMARTSTYLES
Mohan
Award points if it adds information.

Amount in Words using SPELL_Amount in Arabic Smart-forms

Similar Messages

Maybe you are looking for