Amount of rings before divert to voicemail

Does anyone know whether you can alter the amount of rings you can ignore before the N73 diverts to voicemail? So far I've only managed to answer my phone 3 times - the rest have either rung off or diverted to voicemail. People think I'm ignorning them!

You can set the divert using this code at when at the standby screen :
*61*[Phone Number]*11*[Time]#
[Phone Number] is the number you want to divert to
[Time] can be either 5, 10, 15, 20, 25, or 30 seconds
Sourced from http://www.arcx.com/sites/GsmFeatures.htm
Knowledge should be your Advisor when you need help.
1610»2110»8110»5110»3310»6210»7250i»6220»6230»6230i»6233
Love me or hate me, its still an obsession. Love me or hate me, that is the question. If you love me then Thank you! If you hate me then ...

Similar Messages

  • Amount of rings before voicemail

    Is there a way to adjust the amount of rings before it cuts to voicemail?

    Can only be done by your carrier, so contact them.

  • Rings before going to voicemail

    How do you set the number of rings before going to voicemail.

    This is the code for extending the ringing time with Vodphone... I've set it on a few phones and it works. The 121 portion of the code if the voicemail number so if another network is different, it's that bit that you change.
    The 30 at the end is the number of seconds it rings, I think you can also change that to 20 or 25 or whatever you fancy.
    Tap the phone icon to bring up the phone keypad
    Type in the following code as if dialing a number: *61*121*1130# then press call.
    You'll get an on screen message saying you've changed the voicemail settings (or something like that).

  • How can I set the number of rings before going to voicemail?

    Help please..... my phone rings more than 10+ times before rolling to voicemail. How do I set the number of rings I want? I am missing calls as callers will not wait through through so many rings to get to vm if I am unable to pick up the call. Thank you for any help you can give!

    You can't. Try contacting your phone carrier as they handle voicemails.

  • Change length f ring before going to voicemail?

    Is it possible to adjust how long the phone rings before it goes to voicemail?

    This is a "carrier" setting that has to be done by your cell carrier...some allow you to set that in voice mail settings (when you call into voice mail) other you have to talk to operator...some have special code to send via keypad...but there is no iPhone setting as Voice mail is taken care of at the carriers servers.

  • How do you change the number of rings before going to voicemail on ios7

    my phone only rings for like 4 rings then goes to voicemail I need it longer help!?!?

    You cannot change that, it is not user programmable. That is handled by your carrier, and it is not based on the number of rings, it is based on time. Call your carrier and see if they can extend the time for you. They may not be able to do this.

  • Only 2 rings before going to voicemail!

    Hi, my lumia 820 only rings twice before it goes to voicemail. This often isn't long enough to get across the room! How do I get it to ring more than that? I can't find out anywhere
    Thanks!

    Call divert is a network function. While it is possible to change some settings by sending shortcodes to the network from the phone, not all networks use the same codes or offer the same settings. The simplest way to deal with this is to contact your network support and request they change the settings for you as required.

  • How do I extend the amount of rings before it goes to message bank?

    I have read you press the phone symbol and type #61#  and press call on the keypad. Then on the text that appears on your screen on the forth line after the numbers you put the amount of seconds you want your phone to ring for. I don't have a forth line with numbers, what do I do please? My phone only rings four times.

    I just looked up Telstra technical support and they say to type **62*(then number of seconds :15, 20, 25, or 30)#
    I tested my phone and it worked.
    Thanks again.

  • How to change the number of rings before going to voicemail?

    hi, i have call forwarded my calls from my macpro (skype) to my iphone4s and want to change the number of rings to 15 seconds.  Can someone help please?

    You'd need to contact your carrier. They're the only ones who can change that.

  • Setting tone rings before voicemail starts

    How do you set a certain number of phone call rings before voicemail is activated.

    I checked the iPhone User Guide and can't find away to change the amount of rings before going to Voicemail. Somehow your question ended up in the iPad Forum, I'll ask the host to relocate your question to the iPhone Forum and hopefully someone will know for sure.

  • How to Increase ring time before fowarding to voicemail

    Please can someone let me know where the setting are to Increase ring time before fowarding to voicemail.
    I've looked high and low and not able to find it.
    Thanks

    I don't know if it different in the states but I used this and it worked for me.
    http://iphoneguru.org/change-the-amount-of-rings-before-visual-voicemail-answers

  • Rings before voicemail

    How can I increase the number of times the iPhone 5 rings before it goes to Voicemail? I can barely get to the phone in time unless it's right in my hand.

    No, you can't increase the number of rings before going to voicemail.

  • 3315 - Number of rings before diversion to voicema...

    Is there any way of setting the number of rings before diversion to voicemail?
    Currently my 3315 rings about 6 times and then diverts. This is too quick for me and I want to make it (say) 12 rings.
    I cannot find anything on this function in the owner's guide.
    Thanks!

    I also received this belated but nicely detailed response from Nokia Support, so I'm posting it here for posterity:
    In response to your enquiry, the extension of a ring time is a network related feature. Hence, network features are not listed in the phone's user guide.
    You may contact your network provider to request for the ringing time to be extended to the maximum time (normally its 30 seconds).
    If this has been done, you can check if the time delay has been set to the maximum time from the phone.
    1) Menu>scroll to Call Divert and press select
    2) Scroll to Divert if not answered and press Select
    3) select Activate and press OK
    4) select Voice mailbox number and press OK
    At this point, if the call feature has been activated, you will be able to see step (5) as per below. Otherwise, contact your network provider to request them to activate the call divert service and repeat the steps.
    5) Active:Voice Calls, press Details
    6) scroll to Delay and press OK
    7) You will be able to see the time in which the phone will ring before diverting the call to your voice mailbox.

  • Dualphone 3088 and number of rings before voicemai...

    It seems this was posted on the old forums but never resolved.  I (and apparently many others.) are trying to figure out how to adjust the amount of rings before voicemail picks up on our Dualphones.   In my case, it is somewhat erratic.   Sometimes it rings 3 times, others not at all and it goes straight to VM.   I've sent a message to Dualphone support and am still awaiting their reply after a few days.   I've completly reset the basestation/handsets.  I'm using a dedicated static IP with a decent (15/2) internet connection.  
    We have been trying this out as our "home" phone and it's pretty disappointing.   Logging in to the account on the computer and changing the settings there has absolutly no effect on the dualphones.

    I am having the same problem. Tried all the reset and bs settings change suggested by chatandvision and still no luck. Until they come with a new firmwire, we are stuck.

  • How to set the number of rings before voice mail answers?

    How to set the number of rings before voice mail answers?

    For me its:
    1. Open the phone app and dial *#61# on the Keypad. Press the Call button.
    2. Locate this text on the screen: "Setting Interrogation Succeeded, Voice Call Forwarding, When Unanswered, Forwards to +" and record the 11-digit number after the + symbol.
    3. Touch the Dismiss button. Now enter this code on the Keypad: *61*+ followed by the 11-digit Forwards to number recorded in step 2, followed by *11 and *ringtime#. Ringtime is the number of seconds you want your iPhone to ring before voicemail picks up. Your finished code should look something like this:
    *61*+18555513466*11*30#
    In the example above the ring time is set to 30 seconds. Press the Call button.
    4. You should receive the message: Setting Activation Succeeded. Press Dismiss and next time you receive a call it will ring for the new amount of time before going to voicemail.

Maybe you are looking for

  • Multiple check boxes in an update form

    I have a database of the membership of a club. One field in the database is input by checking multiple check boxes. When the insert member record is submitted and multiple check boxes are selected, the information becomes an array of text separated b

  • New Sticky's

    I see several post over and over again. (Yes some people are lazy and dont read though 1000's of post) Could perhaps the ones that post and asnwer many of the same question on her post to this thread the questions they see repeated in excess and mayb

  • Updating text and pictures

    Our company has a website done entirely in Flash. I have no experience in Flash, but my boss wants me to make some simple updates to the website. He wants me to change some pictures and some text. Is this something that I should be able to do easily

  • Clarification regarding the revoke privilege

    The customer revoked "select any table" privilege from a user. (If SELECT ANY TABLE is revoked from a user, then all procedures contained in that users schema relying on this privilege will fail until the privilege is reauthorized) In the below user'

  • Compressor custom settings will not save after reboot

    I am having a problem with compressor removing my custom settings after I restart the program. I will save a custom format and it will show up in the custom folder however as soon as I close compressor and restart it shows 0 in the customer folder. I