Amx:inputdate changing month after its selected

I've tried this in a few different adf mobile apps now, including the sample HR app. On iOS, if the current date is for example 31 October 2013 which is what comes up in the select wheel of the inputdate when I go to enter something, if I select a date in a month which doesn't have 31 days, eg choose 19 November 2013, when I click done, the input date changes the selected value to 19 December 2013. I'm using JDeveloper 11.1.2.4.0

Hi Frank,
no, the issue only occurs where the current day of the month doesn't exist at all in the newly selected month, even if a different day of that month has been selected. So if the current day of the month was 30th and I was to select 20th February it would jump to 20th March. It doesn't seem to register that I've selected a different day before it looks at the Month. The work around I've implemented at the minute is to default the field to the 1st day of the month, however, if the user selects the 31st clicks done then goes to change it again to a different month without 31 days the issue will still occur.
lynsey

Similar Messages

I would like to know, on the ringtone page, where you can select songs out of your music library, is there a way to remove a song from the list after its selected? I would thin there would be a way to "delete" the songs from the list. (Clock app)

I would like to know, on the ringtone page, where you can select songs out of your music library, is there a way to remove a song from the list after its selected? I would thin there would be a way to "delete" the songs from the list. (Clock app)
Let me explain:
In the clock app for ios 6.0.2 I am a little confused. It allows you to go into your music library, and create a ringtone using any songs you choose. However, I cannot find a way to remove a song from this list, just like I cannot delete one of the preset ringtones (which I'm not trying to do, but just as an example)
Thanks for your time! If you need more information just ask.
(I believe both my iPod and iTunes are up to date)

I believe you just are able to delete them from iTunes.
Hope it will be helpful

Crop: add a hotkey to change orientation after initial selection

while keeping the center point intact. A 'quick flip' toggling from landscape to portrait would be helpful, as the 'drag and pull a corner clockwise/counterclockwise' has proven useful to us already.

Me three.
A huge plus for LR is that the crop tool is far more stable than the one in Aperture, easier to use and re-adjust. And I can crop or change the crop at any point in my workflow with out my G5 tower fans going into hyperspeed(like what happens in Aperture)
The orientation hotkey would make speed my workflow even more.
Unnecessary mouse movement is a workflow killer. A hotkey would keep my mouse on task.

Change month of a report by selecting the Year in the EPM context bar

Hi All,
I am very new on BPC 10 and actually I am trying to make some report.
I just try to make a simple thing : display all the month of a year choose by a user (without using the "Editor Report")
I made a simple report using EPMOlapMember, but when I try to change the year in the EPM context bar in the "Time" dimension, the month displayed does not correspond to the year context and even if I refresh my report.
What I would like to do is to allow users to select the year or the month+year in the EPM context bar or by an other way and that the report refresh.
The finality of this report is to compare the operating cost of a month with the year before, in actual or budget, in periodic or YTD, to calculate variance.
Below is the structure I would like to have on a single worksheet:
Scénario : A user choose the month (generally of the month of the current year)
FIRST (periodic) : Display all the month of the month/year (selected by the user)
SECOND (periodic) : 1st column : Display the month/year (selected by the user) in actual
                                    2nd column : Display the month/year (selected by the user) in budget
                                    3rd column : Display the month/year-1 (selected by the user) in actual
                                    4&5th column : Just simple for the delta
THIRD (year to date) : 1st column : Display the month/year (selected by the user) in actual
                                          2nd column : Display the month/year (selected by the user) in budget
                                          3rd column : Display the month/year-1 (selected by the user) in actual
                                        4&5th column : Just simple for the delta
Hope someone could answer !
Regards,
Karine

Hi,
go through this link
http://scn.sap.com/community/epm/planning-and-consolidation-for-netweaver/blog/2013/03/01/static-report-in-bpc-nw-10
Regards,
Shrikant

This is my 3rd macbook air and pro that kicks me out my yahoo email all the time and tells me my password is wrong when its not this been going on 2 years 3 different macs sometimes it dont do it for months after a software update

this is my 3rd macbook air and pro that kicks me out my yahoo email all the time and tells me my password is wrong when its not this been going on 2 years 3 different macs sometimes it dont do it for months after a software update

Don't switch email providers. Switch to another email client on your Mac. It is not Yahoo. I have 3 Yahoo accounts and never have any problems getting or sending mail from/to those accounts. But I don't use the built in Mac Mail program. I use Thunderbird. I use thunderbird on both Mac OS X and Windows. Been using it for some time now with no problems getting my Yahoo mail, Google gmail mail or form my work email account.

How to do you change a movie into a bundle after its been ordered?

How to do you change a single movie into a bundle after its been ordered?

function(){return A.apply(null,[this].concat($A(arguments)))}
.. I cant afford to purchase fontographer ..
If you want it bad enough, you can still make a custom font, and for free at that! Google "FontForge" -- it's an open source font creating/editing package.
Beware, though, as it has a steep learning curve -- that's why I started with "if you want it bad enough".

Why does the menu option change to "save as" after I select the print button?

why does the menu option change to "save as" after I select the print button?

>>The print command is selected in the File pull down menu, the print menu page pops up, I can then select my networked printer (which incidentally is confirmed to work with other software), the print command is in the bottom right hand corner and finally after depressing this print button a "save as" pop-up menu appears and then it only re-saves the file. Is this an issue with the pdf reader install?

I am trying to change country to US for iTunes on my iPad. After I select US in account setting and press NEXT I get message: "Cannot connect to iTunes" and then "The iTunes Store could not process your request. Please true again later". Help please.

I am trying to change country to US for iTunes on my iPad. After I select US in account setting and press NEXT I get message: "Cannot connect to iTunes" and then "The iTunes Store could not process your request. Please true again later". Help please.

downloaded the updated iTunes and that did nothing. I then went through the form about $ very VERY carefully and discovered one field left blank. Once that was filled in, everything worked and I now have my free app.

I have a problem with a chart refreshing after its bound data provider changes.

I have a problem with a chart refreshing after its bound data
provider changes. After the subsetHighLowData.refresh() is called I
would expect the chart to redraw, but it still looks the same. I
even inspected the debugger to see if the slice had taken place and
it had.
Any ideas coding friends?

"nikos101" <[email protected]> wrote in
message
news:gib6aa$prr$[email protected]..
>I have a problem with a chart refreshing after its bound
data provider
>changes.
> After the subsetHighLowData.refresh() is called I would
expect the chart
> to
> redraw, but it still looks the same. I even inspected
the debugger to see
> if
> the slice had taken place and it had.
>
> Any ideas coding friends?
>
> subsetHighLowData.source =
>
highLowData.source.slice(slider.values[0],slider.values[1]);
Just use the ArrayCollection's removeItemAt, and it should
handle the event
dispatching for you.
HTH;
Amy

I have iPhoto 11 installed on my iMac. Has been working for last several months ok. I am trying to create photo books but it gets hung up after I select create book. Does not create the project. Used to work but won't create any projects

ILife 11 (iphoto 11) installed over a year ago with no issues. Have been creating Apple Books with no issues till now. iPhoto now will not create books, calenders or anything else. After I select "create" it does nothing. Used to work Ok. Program seems to stall and do nothing. I can still look at events and other picture files but it will now not create a "project" / "book" Anyone with a similar issue????

ILife 11 (iphoto 11) installed over a year ago with no issues. Have been creating Apple Books with no issues till now. iPhoto now will not create books, calenders or anything else. After I select "create" it does nothing. Used to work Ok. Program seems to stall and do nothing. I can still look at events and other picture files but it will now not create a "project" / "book" Anyone with a similar issue????

VIM behaves differently after visual selection. (if locale="eo.UTF-8")

This seems to be a bug in my VIM editor, because never had this problem before.
But I want to be sure first, by asking here if someone else can reproduce this problem.
The steps to reproduce are...
Set your system locale to Esperanto language. Mine → “eo.UTF-8”
Edit any text file from the CMD, like “$ vim file.txt”.
Start Visual-line selection mode.
...and then, in less than 1 second the selection should be lost, the selected block should “deselect”.
Once this happens, VIM starts behaving differently. Needing to press ESC more than one time to enter command-mode, becoming unpredictably unresponsive many times while I am editing and entering insert mode, and forgetting the undo history... so I do a “:u” command and the file changes back to its first version, ignoring all the changes history in between.
The only solution in this case, is closing the file and opening again.
But once I try to visual-select for first time, it happens again.
Thanks in advance for your time.
Last edited by Alexmar (2011-03-22 18:41:36)

bernarcher wrote:Mostly confirmed (using LANG=eo.utf8 in an urxvt terminal).
First visual line selection is deselected almost immediately. But visual selections of any kind do work afterwards.
Necessity of multiple ESCs is confirmed.
Thanks a lot for your time, so it seems there is definitely a bug here.
bernarcher wrote:The history seems to remain intact, however. (But I did not try hard.)
Correct VIM’s behavior, by doing this:
Enter insert mode.
Insert random text.
Exit insert mode.
↑ Repeat some times.
Perform some Undo actions.
Should be, one insertion Undo per :u.
But if I do this after triggering this bug, one undo would ignore all changes made since the “buggy mode” was triggered.

Cancel subscription after its expired

Hi there,
My membership has expired and I went to cancel but I cant now because it has already expired and the card that I used last year to pay for it got lost and I cancelled it so nothing can be charged to it but just received another invoice dated 5th March 2015 but I haven't paid anything also I don't want to continue with creative cloud. How can I cancel after its expired?
Also it says I still have 7 days left, but expired on 5th of march. Will I get charged for this extra month?
Thanks

This is an open forum, not Adobe support... You need Adobe support to cancel a subscription
-start here https://forums.adobe.com/thread/1703848
-or by telephone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html
--and two links which may provide more details, if the above links don't help you
-http://helpx.adobe.com/x-productkb/policy-pricing/return-cancel-or-change-order.html
-http://helpx.adobe.com/x-productkb/policy-pricing/cancel-membership-subscription.html

Less than a month and its already broken

Dear BT and Forum users,
I am not very happy with my BB service right now and have come on here in the hope that I might get more that platitudes and fob offs.
So... a few weeks ago my husband finally gave into the sales calls and agreed to have Infinity installed. Our reason - not so much faster internet but in the hope we might get a consistant service.The service we had before that was tempermental at best and we were sick of having to reset the router every other day. (in hindsight we should have just gone with an alternative ISP).
It was installed a couple of weeks ago and worked well until last Wednesday, since then the service has been a comedy of errors. To start with my husband confirmed from the outset that they problem was not coming from inside the house but the customer service operator insisted on booking an engineer.
We agreed to the Friday morning appointment. I booked the morning off work (using annual leave) and the engineer didn't show up. My husband called at 12.30 (they won't take calls from me as I'm not on the bill) and he was assured the appointment was booked in. Shortly after 1 I took a call at the home to say the "system" had lost the booking and the engineer wouldn't be coming.
I said I was in all day, he could come now but that was clearly off script and the call centre operative wouldn't enterntain the idea (annoyingly there were 2 BT vans in my neighbourhood that afternoon). Instead they wanted me to rebook another 4 hour appointment. I couldn't stop in Saturday and wasn't going to lose more leave. I said I would discuss the options with my husband.
What followed that afternoon was a series of coversations with them, some with me at home and some with my husband at work offering the same options and us giving the same response. I don't know if the operatives weren't talking to each other or didn't understand but it was really irritating. In the end they said they would call my husband at 4pm. They called some time after 5 and said the would try the exchange first and call us Monday morning if they needed to access the property.
Saturday 8.30 the engineer called to say they were on their way, we had the time so we waited. He arrived and was in the house all of 15 minutes before confirming the problem was in the exchange (all that time wasted for that!). We got a call Sunday to say they needed a new part at the exchange then today my husband got an undecipherable voicemail and a text saying the service will be fixed in the next 72 hours. He has spoken to them this evening and we're still non-the-wiser as now there's a fault further up the line.
Whilst all this is going on we have tried to find out if they expect us to pay for the Infinity and BT Vision whilst the services are not working. All they will say is they won't look at refunding losses until the issue is fixed. I realise they can't give us a total but it was a pretty straight forward question - am I paying for this non-service. One operator has said I can have £10 to cover the missed appointment (I value my time and annual leave a little higher).
In all honestly the loss of internet and BT vision is frustrating but what has really dissapointed me is the lack of customer service. No one in the call centres seem to have a clue what's going on (we've had so many versions of what's wrong) and are too tied to a script. There's no sense of inconvenience - I'm supposed to be ready and waiting for 4 hours at a time but they will fix it sometime in the next 3 day.
Right now I'm not even sure its worth waiting to get this fixed.
I'd love for someone to come on here and fix this for me but I'd settle for a little peer support/shared experience.
Thanks
L

OK, so I was being a little optimisitic. We're back online (yay!) but now the bill is just more of the same. Apparently we have to wait 48 hours before they will tell us how they are adjusting the bill I understand that they cannot confirm the problem si fixed yet because of some internal policy but they won't even tell us how much they would calculate as of now - a pretty straight forward question.
So with that, we threw in the towel... said if they can't asnwer a simple question we were off. Of course when I told then operator this he said he's put me straight through to his boss and then left me on hold for over 20 minutes before I gave up!
Called back to leaver dept. to be told we have to pay £200 to cancel (funny they could give us that figure pretty easily). I don't know what was said when he signed up but I am going to be investigating this further. We've had the service less than a month and its been broken a week.

How to get the namae of the month given its respective number

Hi,
I am Asia and am a new member to this site.
Please let me know if any function module to get the name of the month given its respective number.
Thanks & Regards,
Asia

FM - MONTH_NAMES_GET.
Also you can use following select statement.
select ltx into v_ltx from t247 where mnr = p_month
and spras = 'EN'.
Regards,
Amit
Reward all helpful replies.

How can you change your line access selection? I have found where you can change your plan selection, but can you change the line access fee or is that a set amount?

How can you change your line access selection? I have found where you can change your plan selection, but can you change the line access fee or is that a set amount?

DIVAB71,
Great question. The line access fees for the account are a set amount and can not be changed unless you are going from a basic to a smartphone or vice versa. If you are wondering about adding the month to month discount if you are out of contract Ann154 has provided great information on how to access and add the feature.
LindseyT_VZW
Follow us on Twitter @VZWSupport

Amx:inputdate changing month after its selected

Similar Messages

Maybe you are looking for