An arrow in a Tab Bar (View Stack)

Hi
Is there a way to add an image next to the label of the selected tab in the ViewStack. ? Any ideas?
thanks
Dharmesh

Ok, I now understand what you want. So, I don't think there is a default implementation for this. I think that you should extend the TabNavigator and implement the desired functionality. I threw together a really fast example to demonstrate how this would be done ( keep in mind that it has been thrown together in 2-3 minutes so it's not perfect, but it should be enough to get you started ).
With best regards,
Barna Biro
PS: The example is an AIR application ( I didn't observe I had AIR selected when I created the new project and I was too lazy to recreate it in a Flex project afterward... anyway, the code would be identical in Flex too - since I'm not using any "AIR only features" ).

Similar Messages

Double click on the left arrow on the tab bar creates a New Tab at the right hand end.

With Firefox 29.0.1 double clicking on either the left or right hand arrows in the tab bar creates a new tab at the right hand end of the tab bar. This is annoying behaviour that violates standards around UI design single click and double click. A double click should extend the behaviour of the single click rather than doing something completely different (opening a new tab). An example would be , in Word a single click selects a word, a double click selects the sentence and a triple click selects the paragraph. Note that this is a separate issue from double clicking on the tab bar itself to create a new tab.
When there are more tabs on the tab bar than will fit in the viewport the tabs scroll sideways so show the tab in use. I can click the left and right arrows at the ends of the tab bar to scroll the bar in that direction to bring a tab that I want to select into view. I believe that double clicking the left arrow would scroll the bar fully right, exposing the left-most tab. Double clicking the right arrow would scroll the bar fully left exposing the right-most tab.
This is a logical and expected extension of the behaviour of the single click. Single click - scroll once (seems to be about three tab's worth), double click - scroll all the way.
At the moment, if I want to scroll to the left-most tab I have to click the arrow slowly and carefully until I reach it. I used to single click rapidly on the left arrow until the tabs stopped scrolling without having to count how many clicks. It's possible that my rapid single clicks were actually double clicks. Nevertheless, the tab bar would stop scrolling when it reached the end.
Now the behaviour is really annoying and unexpected. A double click on the left arrow scrolls the tabs fully right and then fully left and creates a New Tab at the right hand end. Ditto the right hand arrow in the opposite direction.
While I can (maybe) see that value of a double click on the tab bar itself creating a new tab, double clicking one of the scroll arrows should not produce a new tab.
Double clicks on the tab arrows should scroll the tab bar fully to that end. If the tab bar is already fully scrolled to that end then additional clicks (single, double and triple...) should be ignored.
I like the idea of opening a new tab to the right of the one that currently has focus. This should be a right click context menu option.

That shouldn't happen if you click the scroll buttons on the tab bar.
A double-click should act as page up/down and move a full screen and a triple-click should move to the far left (first tab) or the far right (last) tab.
Start Firefox in [[Safe Mode|Safe Mode]] to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

There are no more arrows on the tab bar so if you have many tabs open you cannot navigate through them anymore what happened to that?

I always have 30+ tabs open. Used to be there were arrows on either side of the tab bar and you could navigate to the start or the end of your tabs. Now those arrows are missing and if you have a lot of tabs open you cannot navigate, you must close a tab in order to see other ones. Or click that group tab button thing to see which tabs you have open which is stupid. Is just mine faulty? or did this function just go away. Makes no sense to not be able to scroll through and see all the opened tabs.

hello, can you try to replicate this behaviour when you launch firefox in safe mode once? if not, maybe an addon is interfering here...
[[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]

Trouble adding new view to tab bar

Hello All,
I am trying to build a first Tab Bar Application through Interface Builder. I created a stock Tab Bar application using XCode but I am having trouble replacing the views with different ones (mine).
For example, I have created a new view called PostView from XCode with just a simple label. I then went to Interface Builder, clicked on the second tab, and go to Tools->Attribute Inspector and change the NIB name from SecondView to my new PostView.
However, when I run this, it crashes when I click on the the second tab with the following error in GDB:
2008-06-30 23:22:26.623 TG2[5855:20b] * Terminating app due to uncaught exception 'NSInternalInconsistencyException', reason: '-[UIViewController loadView] loaded the "PostView" nib but no view was set.'
I can't for the life of me figure out where I should be loading or setting this view as SecondView doesn't seem to be programmatically loaded anywhere and I can't seem to find any other reference to it in IB.
I'm sure this is noob easy -- any ideas?
Many thanks in advance,
Tim

First of all, click on File's Owner in the PostView.xib window. In the inspector window (it's on the right by default--if you don't see it, press Cmd-Shift-I), click the "i" button to display the Identity pane. There should be a drop down box labeled "Class". Is the class set to your controller class? If not, adjust it so it is.
Next, click the blue circle with the white arrow. This will bring up the Connections pane. Look at the line that says "view". Is it connected to anything? (If it is, the name of the object it's connected to will appear next to it, with an "x" to undo the connection.)
If not, hold down the circle to the far right of "view", then drag to the "View" icon in the PostView.xib window. (I'm assuming you haven't renamed the view.) A box should appear around the icon if it's the right type for that outlet. Now let go, and Interface Builder will establish the connection.
Save, then go back to Xcode and build and run your project. Did that fix the problem?

Whenever I open a new tab or window the back arrow on the navigation bar doesn't work

When I open a new tab or window the back arrow in the navigation bar isn't highlighted and doesn't work

Do you have already visited more than one website in a tab if that happens?
Start Firefox in [[Safe Mode]] to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode

How do i disable orientations for a specific view in my tab bar project without disabling for the other views?

How do i disable orientations for a specific view in my tab bar project without disabling for the other views?
Any suggestions?

Note that you can also hide the tab bar completely with code in the userChrome.css file.
Add code to the userChrome.css file below the default @namespace line.
*http://kb.mozillazine.org/userChrome.css
<pre><nowiki>@namespace url("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul"); /* only needed once */
#TabsToolbar { display: none !important; }
</nowiki></pre>
The customization files userChrome.css (user interface) and userContent.css (websites) are located in the chrome folder in the Firefox profile folder.
*http://kb.mozillazine.org/Editing_configuration

Ipad tab bar/multi views app

i want to develop an ipad app with a main screen contains a tab bar control in the bottom, this tab contains 5 sections each one open a new view
sections are (home,P1,P2,V1,V2,info)
home -> return to the main screen
P1->open a pdf file with (back-next) feature
p2->open images slide-show with (back-next) feature
V1->open a video from youtube
V2->open a video from resources folder(saved with the app)
how can i implement these features ?
which type of app should i use? (window based OR view based)?why?
should i add a new view controller for each button in the tab bar?
how can i open a pdf file?any sample code available ?
( i found a pdf sample code but it opens just one page)
any slide show sample code ?
how can i call a view controller based on the user selection?
i highly appreciate any help

I had trouble getting an iAd to work when using IB as well. I ended up adding it programmatically like this:
self.adView = [[ADBannerView alloc] initWithFrame:CGRectMake(0,412,320,50)];
adView.currentContentSizeIdentifier = ADBannerContentSizeIdentifier320x50;
adView.delegate = self;
[self.view addSubview:adView];
in the - (void)viewDidLoad of my view controller.
Hope that helps.
-Phil

RSS Table View with Tab Bar Code Error

I created an iphone app with a navigation controller that has a table view which displays an rss feed. My client wants it able to display multiple rss feeds through a tab bar. I have attempted several times and have messed up. If anyone could help me with this it would be greatly appreciated.

Hi Guy, and welcome to the Dev Forum!
I would recommend starting as follows:
1) Start a new project with the Tab Bar Application template;
2) Open MainWindow.xib and select Window->Document from the IB menu to make sure the xib window (the icon winow) is visible;
3) Locate the "View Mode" switch in the upper-left corner of the xib window and make sure it's in the Center position to display a 2-column table showing the view hierarchy as a tree of small icons to the left;
4) Expand the Tab Bar Controller branch, then delete (select and Edit->Delete) each of the two view controllers under the Tab Bar Controller. The only child of that controller should now be the Tab Bar;
5) Open the Library window (Tools->Library), drag a Navigation Controller into the xib window and drop it when it's on top of the Tab Bar Controller icon;
6) Repeat step 5 until you have as many nav controllers (one for each RSS feed) as you want (for this example, assume 4 RSS feeds);
7) The Tab Bar Controller should now have 5 children: the Tab Bar plus the 4 nav controllers; if not, drag the nav controllers until each of their icons is shown indented under the Tab Bar Controller just as the Tab Bar is;
8) Expand the first Navigation Controller branch, and expand it's Root View Controller; you should now see that root controller's Navigation Item;
9) Select the nav item, open the Attributes Inspector (Cmd-1), and change the Title to "RSS 1 Root";
10) Repeat 8-9 for the remaining 3 nav controller branches, so the root views will be labeled "RSS 2 Root", ... "RSS 4 Root" respectively;
11) Save the xib, return to Xcode, and click "Build and Go". The project should build and run without any warnings or errors. If not, return to step 1 and try to see where things went wrong.
Let us know if you need more help after you get the above skeleton app working. The next step will be to change the class of the "RSS 1 Root" controller to the class of the first table controller in your original project, and to add that controller's xib (you can delete FirstViewController.h/.m and SecondView.xib by selecting each in the Groups & Files tree of the Xcode project window and selecting Edit->Delete).
Please avoid the temptation to merge the above steps into your original project. In my experience, moving each of your files into the new skeleton, and testing at each buildable stage will reduce the chances for error while making it easier to spot any incompatibilities in your old code. The process shouldn't involve touching any of your XML parse or table display code, but you may need to override some additional table view controller methods such as viewWillAppear:
Btw, in case this hasn't been discussed yet, be aware you'll face a major decision soon: When tabbing to feed no. 2, what happens on the return to feed no. 1? If the user will return to the same detail view that was last displayed, you might need lots more memory and there will be lots more to go wrong. If the user will return to the home menu, the whole project will be much simpler. Estimate your effort accordingly.
Also be prepared for your client to say something like this during beta: "Oh... one or two of the links in feed no. 3 might be a mp3 or mp4 next month. That won't be a problem, will it?".
Hope that helps!
\- Ray

Why clicking the same tab of tab bar returns to the top view of navigation?

Hi, I have a problem combing the UITabBarController and UINavigationController.
I have 5 tabs and in some tab using navigation controller to switch the view layers.
Suppose i'm on tab 0 and go to the second view layer of navigation controller.
When i click the tab 0 again in the tab bar, it takes me back to the top view. It's really weired.
Why do this happen? Can i override the effect?
Thanks.

Never mind. Apparently a duplicate of other threads. Possible fix: update the defective OSX Lion to Mountain Lion.

HidesBottomBarWhenPushed does hot let tab bar appear when view is pop

Hi,
I am currently making a simple Navigation-TabBar application.
I only have two level in this application.
root level and 2nd level.
my objective is to hid the tab bar for the 2nd level.
what I did is that in the didSelectRowAtIndexPath method in the root level, did this
[self setHidesBottomBarWhenPushed:YES];
[self.navigationController pushViewController:computer animated:YES];
when I run it, this application hides the tab bar when it pushes 2nd level view.
but when i get back to the root view, the tab bar remains hidden.
I have looked at the sample code given by apple "iPhoneCoreDataRecipes"
In their application, when I clicked the image in a recepe, it would hide the tab bar.
And when I go back to the level above, the tab bar would show up again.
I tried to look at their code and see what's the difference, but I couldn't figure out.
So how to fix this problem?

Hi,
you need to set the hidesBottomBarWhenPushed-property of the viewController which is beeing pushed:
[compuer setHidesBottomBarWhenPushed:YES];
[self.navigationController pushViewController:computer animated:YES];
Regards
Dirk

Tab bar has disappeared from view and from list of toolbars. How can I get it back?

I was fooling around with the toolbar options, trying (unsuccessfully!) to return to the toolbar layout I had before Firefox was automatically upgraded (without my permission!). I was trying to move the tabs bar down below the other toolbars. Suddenly it disappeared. Various web-suggested fixes involved going into Preferences or Options and doing things. I can't find anything called Preferences, and the option suggested for tabs (show tab bar) in Options doesn't exist in my options. I am very unhappy, not just because I can't find the tab bar, but because the new version messed up how I had my toolbars organized, and there seems to be no option for fixing it.

What method did you use to move the Tab bar?
Did you create a userChrome.css file in the chrome folder in the Firefox profile folder?
Start Firefox in [[Safe Mode|Safe Mode]] to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

More than 5 tabs in tab bar controller

Hi,
I'm totally at a lost trying to get 6 tabs connected to my tab bar controller, which was created using the tab bar controller template. Everything thing works fine with 5 view controllers. When I add a 6th view controller I get the "More" tab in the 5th position, which when touched opens up a table view showing 2 more tabs for the user to choose from. Touching either row in this table view causes the app to crash. The error reads:
2011-06-26 20:37:25.276 TMO[2761:207] will dissapear
2011-06-26 20:37:27.157 TMO[2761:207] -[UIMoreListController __touchesEnded:withEvent:]: unrecognized selector sent to instance 0x4c3c010
2011-06-26 20:37:27.159 TMO[2761:207] *** Terminating app due to uncaught exception 'NSInvalidArgumentException', reason: '-[UIMoreListController __touchesEnded:withEvent:]: unrecognized selector sent to instance 0x4c3c010'
*** Call stack at first throw:
    0   CoreFoundation                      0x014285a9 __exceptionPreprocess + 185
    1   libobjc.A.dylib                     0x0157c313 objc_exception_throw + 44
    2   CoreFoundation                      0x0142a0bb -[NSObject(NSObject) doesNotRecognizeSelector:] + 187
    3   CoreFoundation                      0x01399966 ___forwarding___ + 966
    4   CoreFoundation                      0x01399522 _CF_forwarding_prep_0 + 50
    5   UIKit                               0x003aa0f4 forwardMethod2 + 92
    6   UIKit                               0x003aa0f4 forwardMethod2 + 92
    7   UIKit                               0x003aa0f4 forwardMethod2 + 92
    8   TMO                                 0x00006df6 -[UIView(__TapHook) __touchesEnded:withEvent:] + 51
    9   UIKit                               0x0056f4de _UIGestureRecognizerSortAndSendDelayedTouches + 3609
    10 UIKit                               0x0056fc53 _UIGestureRecognizerUpdateObserver + 927
    11 CoreFoundation                      0x0140989b __CFRUNLOOP_IS_CALLING_OUT_TO_AN_OBSERVER_CALLBACK_FUNCTION__ + 27
    12 CoreFoundation                      0x0139e6e7 __CFRunLoopDoObservers + 295
    13 CoreFoundation                      0x013671d7 __CFRunLoopRun + 1575
    14 CoreFoundation                      0x01366840 CFRunLoopRunSpecific + 208
    15 CoreFoundation                      0x01366761 CFRunLoopRunInMode + 97
    16 GraphicsServices                    0x019971c4 GSEventRunModal + 217
    17 GraphicsServices                    0x01997289 GSEventRun + 115
    18 UIKit                               0x002eac93 UIApplicationMain + 1160
    19 TMO                                 0x000024fc main + 102
    20 TMO                                 0x0000248d start + 53
terminate called after throwing an instance of 'NSException'
Any help or direction will not go unappreciated I've scoured the web and this forum for an answer I can understand. I did get bits of code and explanations regarding using:
    UIViewController *moreViewController = tabBarController.moreNavigationController.topViewController;
    UITableView *moreTableView = (UITableView*)moreViewController.view;
But, it's wasn't enough me to understand how to piece it all together.
Thanks,
Amy

Open Xcode, then click on 'Window', click on 'Organizer'.
Then click on the Documentation icon.
Seach for 'viewcontroller'.
Read and study the documentation for the various flavors of viewcontrollers.
Then try applying some of your newfound knowledge your code and see what happens.
I've found that trying a few ideas based on what I've read about is the best way to learn. Be prepared to make lots and lots of mistakes; You'll learn something from each one.
Above all, be patient. This technology can't be learned in a day or a week or even a month. It may take months before you have that 'aha!' moment. Once you do, it will start making sense.

Setting selectedIndex on view stack after removal

I'm having an issue where when I remove an element from a ViewStack its not selecting the previous item in the list. It keeps snapping back to index 0.
here's some simple code:
<?xml version="1.0" encoding="utf-8"?>
<s:WindowedApplication
 xmlns:fx="http://ns.adobe.com/mxml/2009"
 xmlns:s="library://ns.adobe.com/flex/spark"
 xmlns:mx="library://ns.adobe.com/flex/mx"
 creationComplete="onCreationComplete();"
>
 <fx:Script>
 <![CDATA[
 import spark.components.Label;
 import spark.components.NavigatorContent;
 private function onCreationComplete():void {
 for (var i:int = 0; i < 10; i++) {
 addNew();
 private function removeCurrent():void {
 var child:NavigatorContent = layouts.selectedChild as NavigatorContent;
 if (child) {
 layouts.removeChild(child);
 private function addNew():void {
 var title:String = "item " + layouts.length;
 var content:NavigatorContent = new NavigatorContent();
 content.label = title;
 var label:Label = new Label();
 label.text = title;
 content.addElement(label);
 layouts.addElement(content);
 ]]>
 </fx:Script>
 <s:layout>
 <s:VerticalLayout/>
 </s:layout>
 
 <s:DropDownList id="dropDown" width="200" labelField="label" dataProvider="{layouts}" selectedIndex="@{layouts.selectedIndex}" />
 
 <s:TabBar id="tabBar" width="100%" dataProvider="{layouts}" />
 
 <mx:ViewStack id="layouts">
 </mx:ViewStack>
 
 <s:Button label="remove" click="removeCurrent();"/>
 <s:Button label="add" click="addNew();" />
</s:WindowedApplication>
when you remove the current item, the stack selects item 0. I cannot seem to override this. I want the view stack to select the previous item in the list

Using SuperTabBar from the flexlib solves this issue. http://flexlib.googlecode.com/svn/trunk/examples/SuperTabNavigator_Sample.swf
when you delete a tab, the bar selects the next one in line. Am I wrong in expecting this functionality out of the box in the spark componenet library?

Tab bar application and UIScrollView

Hi Everyone,
I am creating a tabbar application.
I have 5 tabs already setup, and now one of the tabs needs a few more fields appended to the bottom of the view.
I am using a single NIB file with all the views built inside of it.
What I need to do is take the second tab and add a UIScrollView to it, so I can add the additional fields to the bottom.
I would like to stick with using IB....
Here is the stack I have setup, please advise where I would insert the UIScrollView
App
First Responder
App Delegation
Window
Tab Bar Controller
Tab Bar
Main View Controller (Log)
Selected Main View Controller (Permit)
Scroll View
View
Tab Bar Item (Permit)
Main View Controller (Tags)
Main View Controller (Release)
Main View Controller (Other)
I have placed the ScrollView both within the View, and, as shown, a view as a child of the scroll view...
I have set the height of the view and the scroll view at 800px
Please advise on what I am missing in this.
Thanks
tony

alt-088 wrote:
I have all the views loaded within the same XIB file.
It's usually better to make a separate xib for each view. The most important reason for this is memory management. Firstly, all the views defined in MainWindow.xib are loaded at startup. This means a view will be loaded even if its tab is never selected. Views defined in a separate xib won't be loaded unless and until they're needed.
It's also much easier to unload a view if its defined in a separate xib, since the view, along with all its subviews, can be reloaded at any time by simply reloading the xib (e.g. by initing a new controller with [initWithNibName:bundle:|http://developer.apple.com/iphone/library/documentatio n/UIKit/Reference/UIViewControllerClass/Reference/Reference.html#//appleref/occ/instm/UIViewController/initWithNibName:bundle:]). This is especially important when the controller receives a low memory warning. For example, the default implementation of [didReceiveMemoryWarning|http://developer.apple.com/iphone/library/documentatio n/UIKit/Reference/UIViewControllerClass/Reference/Reference.html#//appleref/occ/instm/UIViewController/didReceiveMemoryWarning] will unload a view defined in a separate xib because the method knows how to reload that view.
Another reason for separate xibs is that the main xib needs to be loaded before the app can launch. Anytime you remove an object from MainWindow.xib, you'll reduce launch time.
should i have a view for each of the tabs in the main form?
You probably already have a view for each of the tabs, so I assume you meant to ask, "Should i have a separate xib file for each controller which is connected to the tab bar controller in MainWindow.xib?"
If I restated the question correctly, the answer is yes, as explained above.
Note the Tab Bar App template demonstrates both ways to define each controller's view. The first view controller's view is defined in MainWindow.xib. The second controller's view is defined in SecondView.xib. The difference between these setups can be seen in the Attributes Inspector. If you select the First View Controller (most easily done in the xib (icon) window if the View Mode switch is in the Center position to display the view hierarchy) and open the Attributes Inspector, you'll see the NIB Name selection is blank. If you then select the Second View Controller, the NIB Name selection will be "SecondView".
You could move the First View Controller's view to a separate xib by making a new xib named "FirstView.xib" (File->New File..->iPhone OS->User Interface->View XIB), deleting the View object under the First View Controller in MainWindow.xib, and then setting the NIB Name selection in the Attributes Inspector to "FirstView". After that, open FirstView.xib, select File's Owner and set its Class to FirstViewController in the Identity Inspector, then connect the View object to the 'view' outlet of File's Owner.
You can make a separate xib for any of your views in the same way. Of course in the case of a scrolling view, you would add a UIScrollView object and connect it to the 'view' outlet of File's Owner, then connect the UIView object to the 'contentView' outlet of File's Owner as discussed previously (after setting the Class of File's Owner to a custom class that has a contentView IBOutlet).
Whenever you make a separate xib for one of your views, _make sure File's Owner is set to the same class as its parent controller object in MainWindow.xib_.
\- Ray

Changing the down state color of the Tab Bar

This is probably an easy one.
I have a tab bar that controls my viewstack. I created a new
css to modify the tabbar colors. This works just fine. I have
wonderful purple and white tabs...But when I click a tab it is
using the default blackish/green color and I can not figure out how
to change it.
Anyone know how to do this?

Adobe Newsbot hopes that the following resources helps you.
NewsBot is experimental and any feedback (reply to this post) on
its utility will be appreciated:
mx.containers.ViewStack (Flex 3):
A ViewStack navigator container consists of a collection of
child containers stacked on top of each other, where only one child
at a time is visible.
Link:
http://livedocs.adobe.com/flex/3/langref/mx/containers/ViewStack.html
ViewStack - Flex 3 Getting Started - Adobe Learning
Resources:
Download Projects · Flex 3 LiveDocs ·
Flex 3 Component Explorer ... A ViewStack is a navigator container
that contains other child containers stacked on top
Link:
http://learn.adobe.com/wiki/display/Flex/ViewStack
mx.containers.ViewStack (Flex 2 Language Reference):
What am I missing? mpeterson said on Aug 6, 2007 at 6:21 AM
:. You can use the change event of the ViewStack. -Mike Peterson
Flex doc team
Link:
http://livedocs.adobe.com/flex/2/langref/mx/containers/ViewStack.html
Flex Snippet Tutorial - View Stack Component:
A small tutorial on how to use a Flex ViewStack alone and
with a LinkBar.
Link:
http://blog.paranoidferret.com/index.php/2007/08/06/flex-snippet-tutorial-view-stack-compo nent/
Creating a ViewStack container -- Flex 2.01:
You use the < mx:ViewStack > tag to define a ViewStack
container, and you define the child containers in the tag body. You
use the following properties of
Link:
http://livedocs.adobe.com/flex/201/html/navigators_066_04.html
Tag Archive for viewstack at Flex Examples:
The following example shows how you can use a timer to change
the selected index in a Flex ViewStack container. Full code after
the jump.
Link:
http://blog.flexexamples.com/tag/viewstack/
Disclaimer: This response is generated automatically by the
Adobe NewsBot based on Adobe
Community
Engine.

An arrow in a Tab Bar (View Stack)

Similar Messages

Maybe you are looking for