An error 1069 - )The service did not start due to logon failure) occurred while performing this service operation ...
Hi All,
We seem to be being plagued by the error below by our SQL Server agent. This happens almost everytime we restart the server that has been running for a day or two.
Our SQL Server Agent uses a none expiring domain credential. I understand that this problem only happens when the profile being used by the SQL Servr Agent has changed (password change). What puzzles me is that the login is A ok and no changes has been made to it's password.
We always resolve this problem by changing the login used in the SQL Server Agent to local and after that, returning it back to it's original domain login. Unfortunately, we cant always do this everytime something goes wrong.
Can anyone please help us shed a light on this? We're using SQL2k with SP3a. Thanks!
Error:
An error 1069 - )The service did not start due to logon failure) occurred while performing this service operation on the SQLServerAgent service.
Regards,
Joseph
Ran into this error, and the password was correct. What the System Event Log said:
Code SnippetEvent Type: Error
Event Source: Service Control Manager
Event Category: None
Event ID: 7041
Date: 10/8/2008
Time: 9:33:09 AM
User: N/A
Computer: ComputerName
Description:
The SQLSERVERAGENT service was unable to log on as DomainName\SQLAgent with the currently configured password due to the following error:
Logon failure: the user has not been granted the requested logon type at this computer.
Service: SQLSERVERAGENT
Domain and account: DomainName\SQLAgent
This service account does not have the necessary user right "Log on as a service."
User Action
Assign "Log on as a service" to the service account on this computer. You can use Local Security Settings (Secpol.msc) to do this. If this computer is a node in a cluster, check that this user right is assigned to the Cluster service account on all nodes in the cluster.
If you have already assigned this user right to the service account, and the user right appears to be removed, a Group Policy object associated with this node might be removing the right. Check with your domain administrator to find out if this is happening.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp
...sure enough it had been removed from the "Logon as a service" list. Hope this helps.
Similar Messages
-
'error 1069 - (The service did not start due to a logon failure) in BAM
I installed BAM on XP SP2, i do have IIS configured and XE DB, after installing when i tried starting the services as per post-installion guide.i did found the error 'An error 1069 - (The service did not start due to a logon failure).In google i could find a remedy saying
Remedy: Go to Start /Programs / Administrative tools / Services. Right-click the Goodlink Server and select Properties. Click the Log On tab. Retype the correct password. Start the Goodlink service.
i did so but did found the same error.So i tried changing a few things in LogOn tab such as " Earlier it was logging in from machine name and pwd , since it gave an error" i changed it to local system account ." now all services of BAM have started except Oracle BAM Active Data cache.
Anyone pls rep how do i resolve this? Do i need to re-install? i need this to be done very urgently.Windows XP is not a certified platform for BAM. However, the product works fine on XP for evaluations and demos. For production, use a certified/supported version of Windows as is documented in the Software System Requirements section of the BAM Install Guide.
All Postinstall steps apply to all versions of Windows that BAM runs on except for the Postinstall step called "Required Configuration for Microsoft Windows Server 2003". As indicated by the step name, this one is for W2003 only.
"network not found windows 53 error" is generally a network, account or password issue. Please follow the Install Guide step by step to avoid installation issues like this.
See "Troubleshooting Start Page Issues" for start page problems.
As indicated in the Install Guide, you can use host names or IP addresses:
"12. On the Configure location of Oracle BAM step, enter the host name or the IP
address where each component is to be installed, even if it is not being installed at
this time, then click Next."
Regards, Stephen -
Experts, I created repository first with the name of rep_bkd_dev (Unicode),Then my lead told that we need to create RS with MS Latin,So am trying to creating a new repository with the name of dev_repository and it is showing the below error.Can some one help me out here. Regards,
hi I want to create a file with muiltple header detail and trailorSample of my file 1F99500094959 5F99000000999911025F99000000999912025F99000000999913029F99500094959 1G83341002729803 5G83000000999918020109G83341002729803 1G83910377940 5G830000009999190201011050003522029G83910377940 T20110720000000900000006750{ In this file 1 is header and 5 is detail and 9 is trailer and in last T segment is also trailerI have any idea to create seperate 3 files and in lastconcatenate all file with the help of unixbut in my case data is so large (in millions) this approach is not use full please suggest my any ideaHow to create VSAM file
-
Hi
-when i install default instance MSSQLSERVER i added a domain account as a service account,
- when i change port for TCPIP PORT , and after sql service and sql agent service did not started again.
it thrown error
The SQL Server (MSSQLSERVER) service failed to start due to the following error:
The service did not start due to a logon failure.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Service Control Manager" Guid="{555908d1-a6d7-4695-8e1e-26931d2012f4}" EventSourceName="Service Control Manager" />
<EventID Qualifiers="49152">7000</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
but when i add domain\sqservice account in administrators group these services started,
1) here why this change behavior happened
2i changed the port 1500
adilHI
the sql instance service is running with domain/sqlservice account ,
- i stopped the sql service service
- when i start it not started again and i found below error message
Domain and account: MOJPORTAL\spsqlservice
This service account does not have the required user right "Log on as a service."
User Action
Assign "Log on as a service" to the service account on this computer. You can use Local Security Settings (Secpol.msc) to do this.
If this computer is a node in a cluster, check that this user right is assigned to the Cluster service account on all nodes in the cluster.
If you have already assigned this user right to the service account, and the user right appears to be removed,
check with your domain administrator to find out if a Group Policy object associated with this node might be removing the right.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Service Control Manager" Guid="{555908d1-a6d7-4695-8e1e-26931d2012f4}" EventSourceName="Service Control Manager" />
<EventID Qualifiers="49152">7041</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8080000000000000</Keywords>
<TimeCreated SystemTime="2015-04-24T17:12:58.326973300Z" />
<EventRecordID>2177</EventRecordID>
<Correlation />
<Execution ProcessID="520" ThreadID="4044" />
<Channel>System</Channel>
<Computer>PORTALSQL1.mojportal.com</Computer>
<Security />
</System>
<EventData>
<Data Name="param1">MSSQL$xSQL</Data>
<Data Name="param2">xxxL\spsqlservice</Data>
</EventData>
</Event>
adil -
"The TestStand service did not start up promptly"
I have a LabView Operator Interface startup problem with TS 4.1. If
the OI is started immediately after system boot the operator may get apopup error from TestStand:
"The TestStand service did not start up promptly"
The
TestStand Service has a dependency on RPC so if either does not startup
before the operator launches the OI, he gets the message. If he
dismisses the message there is no further error i.e. the software
continues to work OK.
The real problem is the end user does not like this message and wants it removed.
Any suggestions how I can get rid of this message?
Only ideas I can see at the moment - either to have some kind of
delay timer on startup (this would need to be around 1-2 mins after
boot
on the system in question to stop it happening) or perhaps some LabView
code to poll the status of the TestStand service somehow so that we
wait for service to start before the OI communicates with testStand -
and thus the
popup does not occur.The service should not normally take any significant amount of time to startup. There are some issues with service startup that we have noticed in some cases, but I don't remember the details. I will try and find out and get back to you. In the meantime, or as a possible solution, you can use the Windows SDK to check the status of the service and to wait until it is running. I'm not sure if the following can be directly translated into LabVIEW dll calls, but it would definitely be possible to create a C/C++ dll with the following code in it and call it from LabVIEW (If you do not have access to a C/C++ compiler and/or would like me to, I can probably build a dll with this code in it for you):
int MakeSureServiceIsRunning(void)
SERVICE_STATUS serviceStatus;
SC_HANDLE hService = NULL;
SC_HANDLE hSCM = NULL;
// Put variable into a good initial state for return value.
serviceStatus.dwCurrentState = SERVICE_START_PENDING;
hSCM = OpenSCManager(NULL, NULL, SC_MANAGER_CONNECT);
if (hSCM == NULL)
goto Error;
hService = OpenService(hSCM, "National Instruments TestStand Service", SERVICE_QUERY_STATUS);
if (hService == NULL)
goto Error;
do
if(!QueryServiceStatus(hService, &serviceStatus))
goto Error;
if(serviceStatus.dwCurrentState != SERVICE_RUNNING)
Sleep(100); // don't just do busy waiting, give up cpu time to other threads.
while(serviceStatus.dwCurrentState == SERVICE_START_PENDING);
Error:
if (hService != NULL)
CloseServiceHandle(hService);
if (hSCM != NULL)
CloseServiceHandle(hSCM);
if (serviceStatus.dwCurrentState == SERVICE_RUNNING)
return 1;
else
return 0; // An error occurred, or service is in an unexpected state.
Or alternatively, if you want to do the polling inside of LabVIEW you could just do the following in the C/C++ dll:
int GetTestStandServiceStatus(unsigned int *serviceStatusReturnResult)
SERVICE_STATUS serviceStatus;
SC_HANDLE hService = NULL;
SC_HANDLE hSCM = NULL;
hSCM = OpenSCManager(NULL, NULL, SC_MANAGER_CONNECT);
if (hSCM == NULL)
goto Error;
hService = OpenService(hSCM, "National Instruments TestStand Service", SERVICE_QUERY_STATUS);
if (hService == NULL)
goto Error;
if(!QueryServiceStatus(hService, &serviceStatus))
goto Error;
*serviceStatusReturnResult = serviceStatus.dwCurrentState;
CloseServiceHandle(hService);
CloseServiceHandle(hSCM);
return 1; // success
Error:
if (hService != NULL)
CloseServiceHandle(hService);
if (hSCM != NULL)
CloseServiceHandle(hSCM);
return 0; // An error occurred. Perhaps TestStand service isn't registered. -
when I plug in my iphone5 or iPad into my Mac I get the message iTunes could not connect the service did not start properly on this device
If you are using Windows 7, go to:
Control Panel>Programs>Programs and Features
Look for a program called 'Apple Mobile Device Support'
Right-click on it
Click 'repair'
Wait until the repair operation is complete, and voila, your problem should be solved, itunes will recognise your iphone/ipod once more. This worked for me. -
When pugging in my ipod touch on itunes, it says this ipod cannot be used because the apple mobile device service is not started. What can be done to remedy this? Up till yesterday I have not had this problem
See:
iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows -
I go through the process of burning a DVD from a Premier Pro Project and at the end of the process I get an encoding error and the dvd does not start burning. How do I fix this?
adam@honestmusky wrote:
Yes I am using encore. I used to have no problem doing this, but I had to get a new computer and now something isn't working right.
How about some DETAILS?
-Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840
Also describe the EXACT steps you take to go from Premiere Pro to Encore -
The exam did not start with Pearson VUE
Hi,
I registered IN Pearson VUE for exam 1Z0-007-ENU: Introduction to Oracle9i: SQL on 04th Jun 2011
from one of the Egypt - Cairo area based Exam center.
the exam did not start. The Pearson system started asking some Authorization code
which the center person doesn't know
The system In PearsonVUE.com doesn't let me reschedule or Cancel the same exam.
Please I want to try taking the exam from different center.
Thanks,user11363083 wrote:
Hi,
I registered IN Pearson VUE for exam 1Z0-007-ENU: Introduction to Oracle9i: SQL on 04th Jun 2011
from one of the Egypt - Cairo area based Exam center.
the exam did not start. The Pearson system started asking some Authorization code
which the center person doesn't know
The system In PearsonVUE.com doesn't let me reschedule or Cancel the same exam.
Please I want to try taking the exam from different center.
Thanks,Very similar senario to {thread:id=2231056}
Suggestions:
1) Read that thread:
2) Ensure you have an incident number from Pearson VUE.
3) I suggest don't try to rebook this yourself, Pearson VUE may be best to do it. They may need to see what the issue was with the first test and clear that down first.
Edited by: bigdelboy on Jun 5, 2011 11:10 PM
Contact Pearson via ( http://pearsonvue.com/oracle/contact/ ) or ( http://pearsonvue.com/contact/emea/customerservice/) ... and ensure they give you an incident number.
If on the telephone use ( www.pearsonvue.com/oracle/locate ) to locate alternatives test centers so they can rebook it for you easily over the phone which Pearson will often do. -
Post Author: sagimann
CA Forum: Deployment
Hello,
I'm not sure if this is due to bad deployment, but I suspect it is, at least due to bad environment.
My env is:
Solaris 10 64 bit
Oracle 10g client installed under /opt/oracle/app/oracle/product/10.2.0/client_1
BOXIR2 + FP2.6 installed under /opt/reporting, running under user 'bouser'. by the way, 'tnsping' works via that user.
Important bouser env:
ORACLE_HOME=/opt/oracle/app/oracle/product/10.2.0/client_1
TNS_ADMIN=$ORACLE_HOME/network/admin
LD_LIBRARY_PATH=$ORACLE_HOME/lib:$ORACLE_HOME/lib32
I reboot the box, then start BO like so:
cd /opt/reporting/bobje
. setup/env.sh
./mysqlstartup.sh
./startservers
./tomcatstartup
Then, I import a BIAR file with some reports, and whenever I try to open any report via infoview, I get a gray error message INSTEAD of the input param form:
Error:
Your request could not be completed because a failure occurred while the report was being processed. Please contact your system administrator.
This does not occur in our BOXIR2 on Windows, which is why I'm guess it's a deployment/env issue. The main obstacle I have is: how do I diagnose this? there's nothing in the bobje/logging folder, nothing in the /var/adm/message file except for the following line:
May 5 15:23:23 testbox1 boe_pagesd[3865]: [ID 253862 user.error] A failure occurred while the Page Server was processing report 'test report' (id=777) for user Administrator
pls advise,
thank you.The solution is to turn off the printer preference (bottom of Page Setup screen) in the Crystal Report before uploading to the Server. Thanks to: http://pinchii.com/home/2011/12/error-adding-reports-to-crystal-reports-server/
The explanation, from a comment in the above linked blog post:
"To elaborate more on the error, what basically happens is that the Crystal Reports engine tries to get the status of the u201Creport printeru201D aka u201Cdefault printeru201D which was present on the system when the report was created, but the printer does not exist anymore. This causes the Crystal engine to error out. By setting the report to u201CNo Printeru201D, it tells the Crystal Engine not to look for that report printer when opening the report."
Edited by: abirdman on Feb 3, 2012 9:49 PM -
hi,
i cannot perform any syncs / back ups (including mobile me) on my imac other than old ipods.
i recieve this message
"An unknown error occurred while performing a sync operation. Please check your account and network settings, then try again".hi,
i cannot perform any syncs / back ups (including mobile me) on my imac other than old ipods.
i recieve this message
"An unknown error occurred while performing a sync operation. Please check your account and network settings, then try again". -
Hi
I just want to start and begin to work in Lightroom.
I just installed the program.
Now I want to get al lot of Information to understand the program. on this side: http://www.adobe.com/de/products/photoshop-lightroom/features.html
But teh films did not start.
On another page all films( other films) are only in english.
https://helpx.adobe.com/de/lightroom.html
https://helpx.adobe.com/de/contact.html?step=LTRM_how-tos-troubleshooting_how-tos
Can this be really true, that I have to learn perfect english to get informations from ADOBE to get informations about using the program ?
I need a completly Trainee tomorrow to work soon in the program.
Is there someone to give me the missing informations ?But teh films did not start.
Those films at http://www.adobe.com/de/products/photoshop-lightroom/features.html worked when I played them. Maybe it's your browser, try a different one. -
SUN One Directory Service is not starting due to nspr4.dll
Hi,
I am using IBM WebSphere_Portal v5.0 configured with IBM DB2 v8.2,
SUN ONE Directory server V5.2 and with Bussiness Objects Server V 6.5.1. And all thease servers are in the same node.
And we updated SP2 and Monthly Hot fix No 10 on BO server
After this fixes updation, we restarted the system. And when I am trying to
restart the WAS and WPS, it was giving me an error like �ADMU3011E: Server
launched but failed initialization.�
When I checked with the log files, it shows authentication exception and as
Ldap service was not started. When I tried to start the Ldap service
manually it failed to start because nspr4.dll file was missing.
Even after placing the nspr4.dll in the appropriate path also, it was not
working.
and it was giving me an error like "the ordinal 156 could not be located in the dynamic link library NSLDAP32V5.0.dll"
and error:1053 service did not respond to the start or control request in timely fashion.
Could any one help me in this regard
Thanks in advance
Sai KumarThis looks like multiple incompatible versions on NSS installed on the machine.
On windows, with the current release of Java ES and its component, they can only be one version of NSS loaded at a time. If 2 products require different versions of NSS, there is an issue with starting one after the other.
Regards,
Ludovic. -
Error 1069: Service Didn't Start Due to Login Failure
Over the past few weeks I've been trying to resolve an issue with a set of services pertaining to FedEx Shipping software and the error message below that pops up every time the system is rebooted or logged out of. I have talked to the FedEx technicians multiple times and it's at the point where this is clearly a "Windows Issue". I have a work around for this , by going into one of the services typing in the SAME password as it was already using and setting the "The account has been granted the Log On As A Service right" prompt.
A bit of a background on the machine. It's running a Windows 7 Pro 64bit OS.This wasoriginallyhappening when the local admin was set as the log on account for the service. One day this stopped working, password hasn'tbeen changed. In a troubleshooting effort, I have since, created a separate local administrative...
This topic first appeared in the Spiceworks CommunityGoogle’s Android One project got its second generation smartphone launched from its new partner Lava – the Pixel V1. As with any Android One smartphone Pixel V1 runs on the latest and pure Android version (Android 5.1 Lollipop) and will get all the latest update directly from Google.Lava Pixel V1 flaunts a 5.5-inch HD IPS display with a screen resolution of 1280720 pixels which is protected with Asahi Dragon Trail Glass protection. Under the hood, the smartphone is powered by 1.3Ghz MediaTek quad-core processor paired with 2GB RAM and Mali 400 MP2 GPU that offers an ultra smooth performance of Android OS. The smartphone comes with a bigger 32GB internal storage, which can also be expanded further using microSD card...Read More
Read More -
I have just installed ES4 LC with only the Rights Management Module. I have everything setup and can access the Policy server from Acrobat pro XI and can see and create policies.
however when trying to apply any policy to my PDF I get the Error in the Subject line.
for all intents and purposes, the setup and configuration looks fine but I seem to be unable to get past the very last step and actually use the policies.
please can anyone help?Try this:
Fix for Software Update
See Troubleshooting Automatic Software Update in Mac OS X.
Delete the following files:
/Library/Preferences/com.apple.SoftwareUpdate.plist
/Home/Library/Preferences/ByHost/com.apple.SoftwareUpdate.xxx.plist where "xxx" is a number.
/Home/Library/Caches/com.apple.SoftwareUpdate/ (delete entire folder)
Maybe you are looking for
-
How to sync two IPhone with one PC , but with different applications
How to sync two IPhone with one PC , but with different applications ? We have two IPhones , but one PC , we want to sync separately , is that possible ?
-
CALL_FUNCTION_REMOTE_ERROR when calling a remote function call through PI
Hello. Thanks in advance for your perspective on this. We are developing an interface that runs in an R/3 system and is suppossed to perform a lookup in another R/3 system via a PI 7.0 system. Here's what we are trying to do, let's call these system
-
How To: Monitor usage of a connection pool
So I have a bunch of EJBs using a DB connection pool hosted under iAS 6sp2 on Solaris. How do I monitor pool usage? I would like to see available pooled connections and in use connections - that would refresh periodically. The iAST tool has the monit
-
How to use touchid(biolock/finger scan) to unlock watsapp in 5S or is there any app that can help.?
-
No DLT Machine? Writing a DL project to 2 DVD-R discs as DDP images
There is yet another way to get a DL project to the factory if you do not have a DLT machine, and do not have access to DL discs in the correct format. Write the DDP images to 2 single layer discs instead! This requires the use of GEAR Pro Mastering