"an error has occurred while uploading one of your files "

Using iLife '06, I've completed a book in iPhoto. I'm trying to buy it -- it goes through the assembling process and right before it's finished it says:
"an error has occurred while uploading one of your files"
But no other explanation is given. Same thing over and over and it always happens right beofre it finishes.
Any ideas what's causing this?

I can't tell you whats wrong but all i do is reboot iphoto, or worst case, restart the mac. and the next time it goes through like a whiz. I placed orders for 24 separate books this week and i have had everything imaginable go wrong but almost everything worked after restaring iphoto.....corrupt file, cannot authenticate user, cannot get credit card approval, problem with file transfer. Don't bother to use the RETRY button. email support was courteous and within 48 hours for other matters not solved by restarting.
Van
Using iLife '06, I've completed a book in iPhoto. I'm
trying to buy it -- it goes through the assembling
process and right before it's finished it says:
"an error has occurred while uploading one of your
files"
But no other explanation is given. Same thing over
and over and it always happens right beofre it
finishes.
Any ideas what's causing this?

Similar Messages

  • An error occurred while uploading one of your files. Please check your network connection and click Retry to resend your file

    Just for the record:
    I had received the error message "An error occurred while uploading one of your files. Please check your network connection and click Retry to resend your file" after all data apparently had been uploaded.
    After trying everything recommended on the internet, I finally found the culprit: Glimmerblocker, an ad blocker!
    (GlimmerBlocker version 1.4.16, Mac OS X 10.7.2 Lion)
    Actually, the credit goes to the very patient German Apple support: they had finally asked me: "what software have you installed lately" ... a big applause to the guys there!
    Best,
    Gabriel.

         In our case, it was not third party software, but a problem with our router not accepting pings.  If you are using a router be sure to set-up Enable WAN Ping Respond,  in the advanced settings.  I reviewed my wireless router's logs and found that it was blocking ICMP Type 3 packets from Apple's server.  As a result, it would give the message, "An error occurred while uploading one of your files.  Please check your network connection and click Retry to resend your file."  You can find the blocked packets in your log based on the time you clicked the buy button for your iPhoto purchase (in my case about a dozen times).  If your packets are blocked, then that is your problem.
         I should have suspected it was the connection since the message plainly said, "...check your network connection...".  However, I discounted this along with so many others based on the forums, since I could connect to the internet.  If there only was a way the message could have gave a little more saying, "Enable your WAN Ping Respond now, or else!"
    Good fortune on your road to Macenlightenment!

  • IPhoto cards: "An error occurred while uploading one of your files."

    Hey, all.
    I've been trying to print some cards via iPhoto (version 6.0.6) but, while some are successful on the first attempt, others just keep generating the following error message no matter how many times I try them: "An error occurred while uploading one of your files."
    I'm at a loss. They assemble fine. They connect fine. They transfer fine. Then I just get this irritating message over and over and over...plus my credit card company keeps calling about "unusual activity" (which would be the multiple "pending" charges for the same dollar amount that each of these tries generate).
    I've tried searching these forums and, while others seem to have had this problem, I've yet to read an actual solution.
    And I've tried contacting Apple but they've been, in a word, useless. Polite, but useless.
    Any suggestions?
    Thanks!
    Message was edited by: theshadowalker

    theshadowwalker
    like, say, panning the image
    What do you mean by "panning"? The only time I've heard this term is with video, referring to moving the camera from right to left. So, if you can explain how what you mean by this it might help.
    While there are reports on this forum about folks having issues uploading, compared to the sheer volume of photo orders Apple process it's quite a small amount, and certainly not enough to suggest a systemic fault.
    And I'd already tried removing the pictures and cards from iPhoto, then halving the pictures' size (MB) in Photoshop, then recreating the whole lot from scratch. Still, no effect.
    Can you explain how you did this? What interaction have you set between iPhoto and Photoshop?
    Other than that: Start with the troubleshooting basics:
    1. Repair Permissions using Disk Utility
    2. Delete the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. You'll need to reset your User options afterwards.
    3. Create a new account (systempreferences -> accounts) and see if the problem is repeated there. If it is, then a re-install of the app might be indicated. If it's not, then it's likely the app is okay and the problem is something in the main account.
    4. What color profile are these images? Have they been processed in Adobe Lightroom or other software before iPhoto? What's the source of the images - Camera? Scanner? Other?
    Regards
    TD

  • 10.3 OS Upgrade error. An error has occurred while downloading software for your device. Please verify your internet connection or try again later

    HELP ! HELP ! HELP ! "An error has occurred while downloading software for your device. Please verify your internet connection or try again later, if the problem persists." appears while attempting to upgrade or install BlackBerry Device Software. upgrading my Z10 OS to 10.3 on both (link & web). but facing same problem again and again. plz help. internet speed is 1mbps and working fine.

    I suggest you try the very clean and very forceful AutoLoader method:
    http://supportforums.blackberry.com/t5/BlackBerry-10-OS-Device-Software/Upgrading-OS10-devices-using...
    Beware that it is completely destructive...the device will be "like new"...no data, no apps, no accounts, etc. Be sure you take a full backup first, as well as make full manual documentation of all apps, accounts, configurations, etc. Sometimes a restore reintroduces the very corruption one is trying to eliminate, and manual reconfiguration is necessary.
    You can also use this to fall back to a prior OS if you desire...you can install any OS level for which you can find an AutoLoader. (Hint...search over on the CB site!)
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • TS1135 Cannot process the Photo Book; it fails always at the very last stage with "error occurred while uploading on of your files. Pls check your network connection and click Retry..." Tried at 12 times and no joy!  Can anyone help?

    Can anyone help with the Photo Book process?  I have tried at least a dozen times and the Photo Book always fails at the very last stage of the process.  I ordered Buy Book, it assembles the book and files are transferred until the very last moment... it says " An error occurred while uoloading one of your files.  Please check your network connection and click Retry to resend your files."   It fails every time, any advice?  My server is TalkTalk which may explain everything !! ??   Help.

    Boot into Safe Mode, Mac OS X: Starting up in Safe Mode, and order from there. 
    Also make a PDF file of your book according to this Apple Document, iPhoto '11: Preview a book, card, or calendar before you order or print it, before you order to check for errors.  Keep that file to compare with the printed copy when it arrives.
    OT

  • Error publishing a folio: An error has occurred while trying to publish your folio.  We could not start this operation. Please try again later.

    I can't publish a folio into my DPS Professional Account.
    This is the error message:
    An error has occurred while trying to publish your folio.
    We could not start this operation. Please try again later.
    Anyone can help?
    Tks

    Hi,
    It seems there is something wrong with your sign up process, sorry for the inconvenience, this is technical forum, the account issue is out of our range, please follow steps below to contact with azure support, it's a best choice for you.
    Get the support channel at:
    http://www.windowsazure.com/en-us/support/options/
    If you have any other concern, please feel free to let me know.
    Best Regards,
    Jambor
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Iphoto6-an error occurred while updating one of your files (book order)

    when trying to order a book the book is assembled but then i get the above error message. it also says please check your network connections and click retry to resend your file. driving me nuts. network connection is fine.
    i have successfully ordered a book before. i have checked file permissions, checked files in book by previewing printing it myself. all files are ample size for printing.
    i have recently signed up to .mac and that isn't working either, disk login problem. Related??
    has anyone else found out how to resolve the book problem?
    Will

    Like others I have been unable to submit books or calendars for printing to Apple. I get the same error messages that others have received. I use CitiCard virtual credit cards account numbers. I noticed that the funds remaining available for the virtual number I used to try to order the Apple books and calendars has decreased. I tried so many times that CitiCards froze the virtual numbers. I actually tried two different virtual numbers before I realized that Apple was trying to charge each time the transaction failed. So far there appear to be no actual charges to my credit card, but I will be keeping careful look at my account for the next few days.
    I am not going to attempt to order Apple books and calendars until posters indicate that the server problem has been resolved. My wife is very disappointed as these books and calendars were to be Christmas presents. We have ordered several books in the past and never had any problems. We may order the book elsewhere but are not aware of other sources for calendars.

  • An error has occurred while trying to load the files required for firefox .....so firefox does not run at all

    HTC Android I have latest version

    Hi,
    I'm sorry you're having this problem with Firefox mobile. You might try going to settings - manage applications on your device and uninstall Firefox and then install it again.
    Thanks,
    Michelle

  • Wont update message displays: An error has occured while downloading software .......

    please help!!
     Iam trying to update my playbook 16GB but each time i accept and try to apply the update i get a pop up in middle of screen saying:
    An error has occured while downloading software for your device. Please verify your internet connection or try again later, if the problem persists.
    now this is driving me insane no matter what i try it doesnt seem to manage to get past this step of the update!!
    Has anybody got ANY tips or advice please!!  

    Without knowing if you have received an update before it's difficult to be sure. The last update was feb 2013 so don't know why you need an update, unless it's a wipe or a repair.
    Lets assume you live in the "western world" then try a friend's house or a free wifi spot to do the update. it's easy for playbook to get upset with router wifi settings.  
    Sarah.

  • Sidecar.xml not uploading 'an error has occurred while loading sidecar.xml. Sidecar.xml is invald'

    Hi all,
    If anyone could throw some light as to why im receiving this error it would be hugely appreciated
      'an error has occurred while loading sidecar.xml.
         Sidecar.xml is invalid. Error #1090'
    i've used this method for filling in all the fidly bits and ordering the folios for about a year now and never had any issues with it..  until i was about to publish our issue yesterday.... and of course a problem had to crop up..
    I did update to the latest mandatory folio builder version, i wonder if this is the problem?
    i have tried all the seeminly obvious solutions, logging in an out of the folio builder, resaving teh .xml file , restarting the computer. swearing.. none of them worked.. :S
    Anyways thanks in advance

    For the benefit of others searching for on this issue in the future, the problem was with the sidecar.xml document. One of the tags elements had an extra "<" in it, which resulted in the XML being malformed.
    Neil

  • A communication error has occurred while invoking commands in SharePoint host process

    Hi All,
    I am using Virtual box to connect to Sharepoint 2013 VPC. Due to an unexpected sutdown of my machine the VPC got some issue. Now I restored it using my bak up file. But after this when I deploy my sharepoint 2013 farm solution Iam getting the following error.
    Error occurred in deployment step 'Recycle IIS Application Pool': A communication error has occurred while invoking commands in SharePoint host process: The server did not provide a meaningful reply; this might be caused by a contract mismatch, a premature
    session shutdown or an internal server error.
    What could be the issue? Any suggestions ?
    Thanks in advance...
    Regards
    Nimisha
    [email protected]

    Hi Nimisha,
    Seems that the original issue of communication error has been solved, for this new issue, it is recommended that you open a new thread which can make others easier
    to focus on one issue in one single thread.
    Best regards,
    Patrick
    Patrick Liang
    TechNet Community Support

  • Im trying to convert a PDF into an excel document and I keep getting an error message that reads "An error has occurred while trying to access the service". WHat am I doing wrong?

    Im trying to convert a PDF into an excel document and I keep getting an error message that reads "An error has occurred while trying to access the service". WHat am I doing wrong?

    it seems my subscription had expired so I signed up again.. It was still having trouble so I repeated the sign up process again.. Then it worked perfectly.. Unfortunately, I think I just subscribed twice and need to cancel one of them. Ugh. Such a pain when I'm trying to get this project completed. I'll be canceling at least one of the subscriptions in the morning. Adobe is not my favorite company right now. None of this was intuitive. And trying to get help was an absolute waste of an hour.
    Regards,
    Nathaniel
    [removed by moderator]

  • An error has occurred while accessing SQL database or system resources. If this is the first time you have seen this message, please try again later. If this problem persists, please contact your administrator.

    I have SP Server 2010, and when I try to DELETE a rule within an existing Audience, "Property (Account Name) = domain/username", I get this error, "An error has occurred while accessing SQL database or system resources. If this
    is the first time you have seen this message, please try again later. If this
    problem persists, please contact your administrator."  When I try to "MODIFY" the rule I get this error, "One or more values typed on this page are not valid. Check the text for the indicated fields." 
    The last time I checked it was working, I'm not aware of any new updates installed recently?  I did a full Profile Synchronization as well, but still not working, please advise? -- Evenstarline

    Hi Sara,
    First of all thank you very much for your prompt responses. Here are my comments to each of your suggestions below, and just to let you know I am using a Farm Admin account.  I
    was able to do this way after we upgraded from SP 2007 to SP 2010 as well.   I would like to mention I'm not a SP expert, just been given the responsibility due to another person handling it just left, so apologize with some of
    my novice questions below?
    1. When I change the Operators to "Contains" or "Not Contains" get generates this error below.
         Error generating in red towards top of the audience page..."One or more values typed on this page are not valid.  Check the text for the indicated fields."
         Error occurred where you enter your "Value"..."Could not resolve the user identity. Please re-enter the account name."
    2. We have a 3-server-tier topology (SPWeb, SPDB, and SPFarm).  Does the updates only apply to where the Central Admin is installed, which is the "SPFarm"?  I checked all
    3 servers, and NONE of the updates (KB2899494, KB2889845, and KB2883055) you'd mentioned are installed.
    3. I'm new to IISRET, I need to be extra cautious of what I run in production, is this safe to run with no problem?  What does it do?  And How do I run it?
    4. I'm also new to viewing the ULS log.  I'd just downloaded a viewer for it.  I'm assuming the only logs I need to be concern with viewing are within the SPAdmin (where Central
    Admin is installed)?  There's so many of them, what should I be looking for exactly?
    Evenstarline 

  • A critical program error has occured while opening workbook

    Dear friends,
    A critical error has occured while opening workbook. The issue is that the same workbook is opening in some one machine but not in others.The following Dialog box is poping out when tried to open workbook:
    "A critical program error has occured.The Program will now terminate.Please refer to trace for further information."
    However,i  did the full updation of service pack3 of MS Excel 2003 on my machine and the same version as on that particular machine(on which workbook is opening). The problem is still there.Please provide some solution.
    Thankx a lot in advance!!!
    regards,
    Sandeep Singla

    The machine where the workbook is opening has a GUI :-
    Release : "710 Final Release"
    File Version : 7100.2.7.1038
    Build : 967944
    Patch Level : 7
    and the machine where the critical program error is coming has a GUI :-
    Release : "710 Final Release"
    File Version : 7100.2.8.1039
    Build : 983952
    Patch Level : 8
    The Excel 2003 are similar in both the machines as the service pack3 has been installed in the machine where workbook was not opening.
    Any help will be appreciated.
    Thanks and Regards,
    Sandeep Singla

  • 1809: An error has occured while generating a seccion key for encryption

    Hi
    I am trying to perform a remote control operation using Console One
    1.3.6c, but evry thime getting the following error message
    "1809: An error has occured while generating a seccion key for
    encryption." I had looked for it in Novell site & found that the fix is
    to upgrade to ZDF 6.5 SP1, but I am looking for a diffrent work around
    for it. Please let me know is there any work around for this problem.
    Regard
    Kallol
    kallol

    kallol,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
    - Check all of the other support tools and options available at
    http://support.novell.com.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://support.novell.com/forums)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://support.novell.com/forums/faq_general.html
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://support.novell.com/forums/

Maybe you are looking for