Iphoto6-an error occurred while updating one of your files (book order)

when trying to order a book the book is assembled but then i get the above error message. it also says please check your network connections and click retry to resend your file. driving me nuts. network connection is fine.
i have successfully ordered a book before. i have checked file permissions, checked files in book by previewing printing it myself. all files are ample size for printing.
i have recently signed up to .mac and that isn't working either, disk login problem. Related??
has anyone else found out how to resolve the book problem?
Will

Like others I have been unable to submit books or calendars for printing to Apple. I get the same error messages that others have received. I use CitiCard virtual credit cards account numbers. I noticed that the funds remaining available for the virtual number I used to try to order the Apple books and calendars has decreased. I tried so many times that CitiCards froze the virtual numbers. I actually tried two different virtual numbers before I realized that Apple was trying to charge each time the transaction failed. So far there appear to be no actual charges to my credit card, but I will be keeping careful look at my account for the next few days.
I am not going to attempt to order Apple books and calendars until posters indicate that the server problem has been resolved. My wife is very disappointed as these books and calendars were to be Christmas presents. We have ordered several books in the past and never had any problems. We may order the book elsewhere but are not aware of other sources for calendars.

Similar Messages

  • An error occurred while uploading one of your files. Please check your network connection and click Retry to resend your file

    Just for the record:
    I had received the error message "An error occurred while uploading one of your files. Please check your network connection and click Retry to resend your file" after all data apparently had been uploaded.
    After trying everything recommended on the internet, I finally found the culprit: Glimmerblocker, an ad blocker!
    (GlimmerBlocker version 1.4.16, Mac OS X 10.7.2 Lion)
    Actually, the credit goes to the very patient German Apple support: they had finally asked me: "what software have you installed lately" ... a big applause to the guys there!
    Best,
    Gabriel.

         In our case, it was not third party software, but a problem with our router not accepting pings.  If you are using a router be sure to set-up Enable WAN Ping Respond,  in the advanced settings.  I reviewed my wireless router's logs and found that it was blocking ICMP Type 3 packets from Apple's server.  As a result, it would give the message, "An error occurred while uploading one of your files.  Please check your network connection and click Retry to resend your file."  You can find the blocked packets in your log based on the time you clicked the buy button for your iPhoto purchase (in my case about a dozen times).  If your packets are blocked, then that is your problem.
         I should have suspected it was the connection since the message plainly said, "...check your network connection...".  However, I discounted this along with so many others based on the forums, since I could connect to the internet.  If there only was a way the message could have gave a little more saying, "Enable your WAN Ping Respond now, or else!"
    Good fortune on your road to Macenlightenment!

  • IPhoto cards: "An error occurred while uploading one of your files."

    Hey, all.
    I've been trying to print some cards via iPhoto (version 6.0.6) but, while some are successful on the first attempt, others just keep generating the following error message no matter how many times I try them: "An error occurred while uploading one of your files."
    I'm at a loss. They assemble fine. They connect fine. They transfer fine. Then I just get this irritating message over and over and over...plus my credit card company keeps calling about "unusual activity" (which would be the multiple "pending" charges for the same dollar amount that each of these tries generate).
    I've tried searching these forums and, while others seem to have had this problem, I've yet to read an actual solution.
    And I've tried contacting Apple but they've been, in a word, useless. Polite, but useless.
    Any suggestions?
    Thanks!
    Message was edited by: theshadowalker

    theshadowwalker
    like, say, panning the image
    What do you mean by "panning"? The only time I've heard this term is with video, referring to moving the camera from right to left. So, if you can explain how what you mean by this it might help.
    While there are reports on this forum about folks having issues uploading, compared to the sheer volume of photo orders Apple process it's quite a small amount, and certainly not enough to suggest a systemic fault.
    And I'd already tried removing the pictures and cards from iPhoto, then halving the pictures' size (MB) in Photoshop, then recreating the whole lot from scratch. Still, no effect.
    Can you explain how you did this? What interaction have you set between iPhoto and Photoshop?
    Other than that: Start with the troubleshooting basics:
    1. Repair Permissions using Disk Utility
    2. Delete the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. You'll need to reset your User options afterwards.
    3. Create a new account (systempreferences -> accounts) and see if the problem is repeated there. If it is, then a re-install of the app might be indicated. If it's not, then it's likely the app is okay and the problem is something in the main account.
    4. What color profile are these images? Have they been processed in Adobe Lightroom or other software before iPhoto? What's the source of the images - Camera? Scanner? Other?
    Regards
    TD

  • TS1135 Cannot process the Photo Book; it fails always at the very last stage with "error occurred while uploading on of your files. Pls check your network connection and click Retry..." Tried at 12 times and no joy!  Can anyone help?

    Can anyone help with the Photo Book process?  I have tried at least a dozen times and the Photo Book always fails at the very last stage of the process.  I ordered Buy Book, it assembles the book and files are transferred until the very last moment... it says " An error occurred while uoloading one of your files.  Please check your network connection and click Retry to resend your files."   It fails every time, any advice?  My server is TalkTalk which may explain everything !! ??   Help.

    Boot into Safe Mode, Mac OS X: Starting up in Safe Mode, and order from there. 
    Also make a PDF file of your book according to this Apple Document, iPhoto '11: Preview a book, card, or calendar before you order or print it, before you order to check for errors.  Keep that file to compare with the printed copy when it arrives.
    OT

  • "an error has occurred while uploading one of your files "

    Using iLife '06, I've completed a book in iPhoto. I'm trying to buy it -- it goes through the assembling process and right before it's finished it says:
    "an error has occurred while uploading one of your files"
    But no other explanation is given. Same thing over and over and it always happens right beofre it finishes.
    Any ideas what's causing this?

    I can't tell you whats wrong but all i do is reboot iphoto, or worst case, restart the mac. and the next time it goes through like a whiz. I placed orders for 24 separate books this week and i have had everything imaginable go wrong but almost everything worked after restaring iphoto.....corrupt file, cannot authenticate user, cannot get credit card approval, problem with file transfer. Don't bother to use the RETRY button. email support was courteous and within 48 hours for other matters not solved by restarting.
    Van
    Using iLife '06, I've completed a book in iPhoto. I'm
    trying to buy it -- it goes through the assembling
    process and right before it's finished it says:
    "an error has occurred while uploading one of your
    files"
    But no other explanation is given. Same thing over
    and over and it always happens right beofre it
    finishes.
    Any ideas what's causing this?

  • "An error occurred while updating the configuration"

    I recieved an Apple Airport Base Station in the mail today. I got it second hand, and I performed a hard-reset since I didn't have the password and stuff. I wanted to update it properly before I started using it.
    I have followed the guides in here point by point, but all I get when I am trying to connect with the AirPort Admin Utility is the error in the topic: "An error occurred while updating configuration".
    I've been surfing and googling for hours now, and can't seem to find the solution to this.
    The Base Station has a model no. M8440, and that's all I know about it. First I thought it was the Snow, then the Graphite and now I don't know. The reason I get confused is because I've read about all these different colored lights.
    Here's a description of my Base Station - in case someone recognized it, and can help me identify it:
    - It's one of those "UFO's"
    - It's all white, with a silver Apple-logo
    - It's got three ports: Modem, WAN and LAN
    - It's got three lights - ALL WHITE all the time.
    I've tried to download firmware - the last I tried was called AirPortFW4.0.9.img - but when I try to run it by clicking it I get the error "The destination folder "AirPort whatever firmware whatever" is on a locked volume.
    My computer is a 2,0 HGz MacBook Pro, and int the AirPort Admin Utility the Base Station is said to be V4.0 dev with IP 192.42.249.13 - so it seems to be hard-resat all right...
    Please folks...help me out!

    I've also encountered the same problem with an older dual ethernet airport.
    I first started having problems with the original one about 8 months ago, and after spending a ridiculous three hours on the phone with AppleCare they sent me out a refurbished replacement. That one worked fine for about 5 months, but then started dropping the signal again, before becoming "unfindable". I went through the same processes, (soft reset, then hard reset etc.) which sometimes solved the problem. I eventually I took it to an Apple Store and of course, it worked fine once I got there. Strange thing is, I took it home and it continued working without incident...for a month. When it happened again, I decided to forgo all the the diagnostic work and just take it back to the store. Sure enough, it fixed itself again, then broke again a few weeks later (now).
    Unfortunately, I just had knee surgery and can't get down there now, (which was getting ridiculous anyway), so I went through everything again for the first time on the MBP. I ended up getting the "An error occurred while updating the configuration" message, and after reading this thread started up the old TiBook. The reconfig worked on there, but it still isn't visible on either computer. In fact, it then becomes inaccesible even through LAN on the TiBook through either the AirPort Admin or the dropdown, though it did appear on the MBP via AirPort Admin. However, it says the software on the airport cannot be uploaded or changed due to out of date software on my computer, and suggests I go to apple.com/support to update my computer's software, which is already current. It does however say that I may be able to change the settings and so forth, which I was able to do. Unfortunately, it still does not show up anywhere else on either computer, no matter how much I tinker with the settings.
    Any ideas? I suppose I'll just stick with built-in ethernet till I am mobile again.
    MacBook Pro 15 Intel Duo Core 2.16GHz 2GB/100GB Serial ATA drive@7200rpm   Mac OS X (10.4.7)   '02 Titanium Powerbook G4 1GHz 1GB/60GB/Superdrive (currently awaiting a new hard drive)

  • "An error occurred while updating the default player for audio file types"

    Getting ready for a deployment of version 9.2 of iTunes for 1400+ users.
    Getting this error when a 'normal' user goes into Edit/Preferences of iTunes and makes no changes.
    "An error occurred while updating the default player for audio file types. you do not have enough access privileges for this operation."
    I've elevated privileges of the C:\program files\itunes directory for this user to Full Control however problem remains.
    Tried to modify the folder to remove 'read-only', as found this suggestion on here, but read-only keeps applying itself.
    User has full rights to the location of the media as specified under Advanced Tab. If I tick 'Set as default media player' and remove tick and then click OK I do not get the error. From what I've read it's affected older versions of iTunes also.
    Doe anyone have any other suggestions?
    Thanks in advance.

    I had a similar issue. Turned out that - somehow - one of the directories or files in my iTunes music folder had gotten set to read only. Fixing it was easy.
    Go to Edit/Preferences.
    Choose the Advanced tab
    in the General subtab select the contents of the box labeled "iTunes Music folder location"
    Click Start, choose Run
    Paste the location
    Press the button to move up one level
    Right-click the music folder, choose Properties
    If this is your problem, the read-only box will be a solid color or checked. Set it to empty and choose the default "apply to folder and all subfolders and files." This will set everything in there readable, which after I did so I stopped getting the error.

  • An error occurred while updating mail preferences

    Hi guys, i get this error "An error occurred while updating mail preferences" when try to enable vacation message in uwc.....any idea? is a hosted domain uwc...

    hi jay,
    mmp 2005q1 patched 118207-42
    uwc 2005q1 patched 118540-21
    there is 2 ldap servers running master replica
    but when i tried on MMP's Messenger Express (webmail), i managed to do it, but not able when using uwc. ( anyway, Messager Express is not using since there is uwc)

  • An error occurred while updating the entries

    Hi
    I consumed WebServices to create DC in ADF, In UI I create insertData operation while inserting data its showing the fallowing error
    on UI page The Error is : An error occurred while updating the entries. See the inner exception for details
    In log file showing errors:
    viceConnectionMessages> <debugExecuteFailure> Failed to execute a SAAJ interaction.
    javax.xml.ws.soap.SOAPFaultException: An error occurred while updating the entries. See the inner exception for details.
         at oracle.j2ee.ws.client.jaxws.DispatchImpl.throwJAXWSSoapFaultException(DispatchImpl.java:1012)
         at oracle.j2ee.ws.client.jaxws.DispatchImpl.invoke(DispatchImpl.java:803)
         at oracle.j2ee.ws.client.jaxws.OracleDispatchImpl.synchronousInvocationWithRetry(OracleDispatchImpl.java:235)
         at oracle.j2ee.ws.client.jaxws.OracleDispatchImpl.invoke(OracleDispatchImpl.java:106)
         at oracle.adf.model.connection.webservice.impl.SaajInteractionImpl.execute(SaajInteractionImpl.java:76)
         at oracle.adfinternal.model.adapter.webservice.provider.soap.SOAPProvider.execute(SOAPProvider.java:334)
         at oracle.adfinternal.model.adapter.webservice.WSDataControl.invokeOperation(WSDataControl.java:259)
         at oracle.adf.model.bean.DCBeanDataControl.invokeMethod(DCBeanDataControl.java:430)
         at oracle.adf.model.binding.DCInvokeMethod.callMethod(DCInvokeMethod.java:261)
         at oracle.jbo.uicli.binding.JUCtrlActionBinding.doIt(JUCtrlActionBinding.java:1635)
         at oracle.adf.model.binding.DCDataControl.invokeOperation(DCDataControl.java:2143)
         at oracle.adf.model.bean.DCBeanDataControl.invokeOperation(DCBeanDataControl.java:467)
         at oracle.adf.model.adapter.AdapterDCService.invokeOperation(AdapterDCService.java:307)
         at oracle.jbo.uicli.binding.JUCtrlActionBinding.invoke(JUCtrlActionBinding.java:740)
         at oracle.adf.controller.v2.lifecycle.PageLifecycleImpl.executeEvent(PageLifecycleImpl.java:394)
         at oracle.adfinternal.view.faces.model.binding.FacesCtrlActionBinding._execute(FacesCtrlActionBinding.java:252)
         at oracle.adfinternal.view.faces.model.binding.FacesCtrlActionBinding.execute(FacesCtrlActionBinding.java:185)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at com.sun.el.parser.AstValue.invoke(Unknown Source)
         at com.sun.el.MethodExpressionImpl.invoke(Unknown Source)
         at org.apache.myfaces.trinidadinternal.taglib.util.MethodExpressionMethodBinding.invoke(MethodExpressionMethodBinding.java:53)
         at org.apache.myfaces.trinidad.component.UIXComponentBase.broadcastToMethodBinding(UIXComponentBase.java:1256)
         at org.apache.myfaces.trinidad.component.UIXCommand.broadcast(UIXCommand.java:183)
         at javax.faces.component.UIViewRoot.broadcastEvents(UIViewRoot.java:475)
         at javax.faces.component.UIViewRoot.processApplication(UIViewRoot.java:756)
         at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._invokeApplication(LifecycleImpl.java:765)
         at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:305)
         at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:185)
         at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265)
         at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
         at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
         at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:205)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:106)
         at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446)
         at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
         at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446)
         at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:271)
         at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:177)
         at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:111)
         at java.security.AccessController.doPrivileged(Native Method)
         at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
         at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
         at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:94)
         at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:161)
         at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:136)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
         at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
         at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
         at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)

    Hi
    I consumed WebServices to create DC in ADF, In UI I create insertData operation while inserting data its showing the fallowing error
    on UI page The Error is : An error occurred while updating the entries. See the inner exception for details
    In log file showing errors:
    viceConnectionMessages> <debugExecuteFailure> Failed to execute a SAAJ interaction.
    javax.xml.ws.soap.SOAPFaultException: An error occurred while updating the entries. See the inner exception for details.
         at oracle.j2ee.ws.client.jaxws.DispatchImpl.throwJAXWSSoapFaultException(DispatchImpl.java:1012)
         at oracle.j2ee.ws.client.jaxws.DispatchImpl.invoke(DispatchImpl.java:803)
         at oracle.j2ee.ws.client.jaxws.OracleDispatchImpl.synchronousInvocationWithRetry(OracleDispatchImpl.java:235)
         at oracle.j2ee.ws.client.jaxws.OracleDispatchImpl.invoke(OracleDispatchImpl.java:106)
         at oracle.adf.model.connection.webservice.impl.SaajInteractionImpl.execute(SaajInteractionImpl.java:76)
         at oracle.adfinternal.model.adapter.webservice.provider.soap.SOAPProvider.execute(SOAPProvider.java:334)
         at oracle.adfinternal.model.adapter.webservice.WSDataControl.invokeOperation(WSDataControl.java:259)
         at oracle.adf.model.bean.DCBeanDataControl.invokeMethod(DCBeanDataControl.java:430)
         at oracle.adf.model.binding.DCInvokeMethod.callMethod(DCInvokeMethod.java:261)
         at oracle.jbo.uicli.binding.JUCtrlActionBinding.doIt(JUCtrlActionBinding.java:1635)
         at oracle.adf.model.binding.DCDataControl.invokeOperation(DCDataControl.java:2143)
         at oracle.adf.model.bean.DCBeanDataControl.invokeOperation(DCBeanDataControl.java:467)
         at oracle.adf.model.adapter.AdapterDCService.invokeOperation(AdapterDCService.java:307)
         at oracle.jbo.uicli.binding.JUCtrlActionBinding.invoke(JUCtrlActionBinding.java:740)
         at oracle.adf.controller.v2.lifecycle.PageLifecycleImpl.executeEvent(PageLifecycleImpl.java:394)
         at oracle.adfinternal.view.faces.model.binding.FacesCtrlActionBinding._execute(FacesCtrlActionBinding.java:252)
         at oracle.adfinternal.view.faces.model.binding.FacesCtrlActionBinding.execute(FacesCtrlActionBinding.java:185)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at com.sun.el.parser.AstValue.invoke(Unknown Source)
         at com.sun.el.MethodExpressionImpl.invoke(Unknown Source)
         at org.apache.myfaces.trinidadinternal.taglib.util.MethodExpressionMethodBinding.invoke(MethodExpressionMethodBinding.java:53)
         at org.apache.myfaces.trinidad.component.UIXComponentBase.broadcastToMethodBinding(UIXComponentBase.java:1256)
         at org.apache.myfaces.trinidad.component.UIXCommand.broadcast(UIXCommand.java:183)
         at javax.faces.component.UIViewRoot.broadcastEvents(UIViewRoot.java:475)
         at javax.faces.component.UIViewRoot.processApplication(UIViewRoot.java:756)
         at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._invokeApplication(LifecycleImpl.java:765)
         at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:305)
         at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:185)
         at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265)
         at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
         at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
         at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:205)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:106)
         at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446)
         at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
         at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446)
         at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:271)
         at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:177)
         at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:111)
         at java.security.AccessController.doPrivileged(Native Method)
         at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
         at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
         at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:94)
         at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:161)
         at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:136)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
         at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
         at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
         at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)

  • HT1414 i was updating my iphone 4s but an error occured while updating it. my computer is not recognizing the phone and i cant restore it.

    i was updating my iphone 4s but an error occured while updating it. my computer is not recognizing the phone and i cant restore it.

    See this support document for help. You may have to do this more than once. http://support.apple.com/kb/HT1808

  • "An error occurred while trying to save your photo library..."

    Installed iPhoto6.
    Started app. It said it would take a few seconds or minutes to upgrade.
    About 6 hours later after churning on thumbnails it is now claiming this error over and over with some time that goes by in between:
    "An error occurred while trying to save your photo library."
    "Some recent changes may be lost. Make sure your hard disk has enough space and that iPhoto is able to access the iPhoto Library folder."
    It says I have 22,759 photos in Library. The Library was a subset of my images, named "iPhoto Library 2005" and it was intentionally kept below the 25,000 limit of iPhoto5.
    Since Steve claims iPhoto6 can easily handle 250,000 photos, I clicked on the upgrade button with confidence. This now appears to be a mistake. Last night I was working on an iDVD for the local school and the majority of that work has simply vanished. There were 320 photos. I spent hours adding keywords, ranking, adjusting temperature, focus, exposure, etc.
    Of the 320, only 16 photos survived. They are 16 in a row from the middle of the roll near the end but not at the end. The roll name was lost. The name is now just "Roll 226" and none of the photos have keywords. I know at least one of the 16 should have the keyword "DUPE" and the ranking 2 STARS since it precedes a double that I ranked 2 during a slideshow, sorted by ranking, and dragged to the DUPE keyword. All 16 should have the ACROCK keyword which I initially assigned to all photos.
    Again, 304 of 320 have vanished and the 16 that remain have no keywords or rankings.
    I watched the slide show in iPhoto5 three times with different music candidates so I know the keywording and rankings evaporated in iPhoto6. I also clicked ACROCK and option clicked DUPE and POOR so that all of the music program photos except dupes and poor images would vanish. I only deleted one photo so there were not a lot of changes to the library in terms of photos in it. I cannot think of any reason why the 16 chosen survived. Only two were placed in a DVD dropzone and they are scattered amongst the 16 survivors.
    Also, the ACROCK and DUPE keywords are also gone while the POOR keyword added in August is in the keyword table just fine.
    I exported these 320 photos last night to iDVD and tried almost all of the different themes and I dragged about 10 different photos to the dropzones, hit play, hit motion, etc.
    It seems very strange that 16 photos from the middle of the pack would survive.
    It seems extra odd that iPhoto5 and iDVD treated these as "established" photos, not photos hanging in the wings somewhere ready to vanish in an upgrade.
    I gracefully saved and quit iDVD and iPhoto5 and there were no crashes and nothing strange happened while making the DVD. I was hoping today to try out the new themes and maybe find one that is just right for the kids. Instead, about 300 of 320 photos of the kids went bye-bye along with all the work on the photos!
    I'm nervous that many more photos are missing but I will need to do a ton of checking to see what else has been deleted by the upgrade.
    The user message that iPhoto6 presents is nearly useless and strange. It offers little if anything to go on in terms of a repair procedure. After saying an error has occurred, it says some recent changes could be lost but doesn't expand at all on what they may be or why.
    From my experience, recently added photos, keywords, keyword assignments, rankings and maybe more can all be lost. To compound matters, before the upgrade it says that you cannot go back to the prior (working!) library in iPhoto5. Beware!
    It finishes by suggesting two vague steps to take. The first is to make sure your disk has "enough" space. How much is "enough"? It doesn't say something like X GB available, Y GB needed. A user would have no clue about how much space to free up. I have over 17 GB and assumed that would be enough. I sure hope it doesn't require double the space of the existing library. I would hope it has a smarter algorithm than that since 23,000 photos at about 3 MB each maps to about 70 GB. That's a lot of "temporary" space to require to perform an upgrade. Since the upgrade/error message provide no details (unlike package installers which supposedly tell you how much space you need), users like me would have no clue if 70 GB is plenty or not enough.
    I found 24 GB secretly used by iPhoto 5 for an iPod Photo Cache and a tech bulletin saying this just grows and grows without control and it can be deleted SO I wouldn't put huge hidden disk usage past iPhoto6.
    The last none-to-helpful suggestion is that a user make sure that iPhoto is able to access the iPhoto Library folder. Huh?!??!?
    Wouldn't this be a great thing to confirm via software before setting about on 6+ hours of work, especially if there is an error message hard-coded in the software confirming that Apple knows the result may be losing valuable customer photos and hours of work on enhancing, keywording, creating DVDs, etc.?
    Of course. This appears negligent. To know that customer file loss will likely result but not checking these things out in advance before taking that risk seems like putting the cart before the horse at customers' expense & pain and certain loss of irreplaceable family photos (for the, say, 80%+ of iPhoto users that "plan" to get a backup routine established?).
    I got burned in the iPhoto5 upgrade as well, losing photos, so I was sure to have a backup so it wouldn't happen again. Most I fear won't be so fortunate so be advised of the risk and work with copies of your photos only.
    Also, why would iPhoto5 have all the permissions it needs to store, edit, tag and otherwise work with 320 photos added last night? Why would version 5 have plenty of permissions to use the folders and the photos in them. Why would iPhoto 6 suddenly lose those permissions or not have enough? This hardly makes any sense. The only way the permissions were set, the iPhoto libraries got created and the albums got created was by dragging a folder of images onto the albums pane in iPhoto5. So, iPhoto5 set all the permissions, everything is under one user account and there should be no surprise permissions for iPhoto6 to deal with.
    It seems unbelievable that iPhoto 6 couldn't do what iPhoto 5 was doing. I never changed permissions and never touched files in the iPhoto 5 structure.
    I can only guess that recently added keywords, recently added photos and recently added rankings and keyword taggings linger in some at-risk staging area that a version 6 upgrade doesn't know how to deal with. This seems like a lame way to code this app so I don't consider this a good guess but what else could it be?
    Anyone else have a better hunch at a root cause?
    Anyone else have an idea of a cure?
    Anyone else run into this?
    It sure doesn't look like there was a test case for having near 25,000 photos (an iPhoto 5 documented requirement), working with the latest roll and then doing a version 6 upgrade because it failed miserably--user data loss--without any special effort to find defects. In a former life I tested software and released software was much more difficult to break than this.
    I would appreciate any other user experiences/solutions related to this problem. I am reluctant to import another 22,000 photos from iPhoto Library 2004 only to find more photos go poof without any rhyme or reason.
    Thanks in advance for your help and I hope this alerts others to a potential for valuable photo loss (i.e., back up before you upgrade, verify iPhoto Library permissions--whatever that means--and have scads of disk space available assuming there's any truth to the error message!).
    --Sam
    G5 Dual 2.7 GHz 2 GB DDR SDRAM   Mac OS X (10.4.4)  

    I'll check if I have copies of copies of copies. This could take a while due to the number of files.
    I picked up a brand new 300 GB Western Digital hard drive thinking 20GB or so was not enough for temp files for upgrading and/or importing.
    I formatted it as a mac os extended, journaled drive, not case sensitive, one full-size partition. I started iPhoto6 with the option key. I had a CF in my other WD 300 GB (with media reader). iPhoto6 asked about the photos on the card. I told it not to download those (again). Because I was holding the option key down, iPhoto6 asked if I wanted to select a different library or create one. I created one on the brand new, 100% empty 300 GB drive. I'm not sure if/where iPhoto6 creates temporary/cache files (like iPhoto iPod Cache folder) as it sets up a new library. I was hoping the empty 300 GB drive would give it ample room to load an existing iPhoto5 library.
    When I dragged an old iPhoto5 Library onto the new iPhoto6 Library Album pane. I saw the "Importing..." start and it went on and on and on and... I let it run for HOURS and HOURS. When I checked around midnight, it had crashed. When I started it again, it said it had run across some huge number of stray photos.
    I have no idea why iPhoto6 would have trouble importing an iPhoto5 library that was below the 25,000 photo mark for 5. This is especially bizarre since iPhoto6 claims it supports 250,000 photos!
    I'll be trying to figure out if these stray photos got imported as dupes, if they lost iPhoto5 keywords, etc. I fear something different but equally bad happened since the number of photos it came up with was like 79,000--again many stray photos that didn't make it into the first import for no known reason. Since libraries in iPhoto5 were around 25,000 or less, I'm not sure what's happening.
    Maybe there's a cache or temp file still created on Macintosh HD and not on the empty new 300GB drive and a bug exists for imports when space on Mac HD is "low" (i.e., under 3.5 GB). Maybe it's seeing thumbs as files it should import? Maybe it's seeing Orig and Modified images as worthy of reimporting?
    I had told it not to import dupes but who knows if it goes by file name, checksum, byte-for-byte comparison, etc.
    I'm not sure if I can even pull up iPhoto5 and 6 at the same time now to scroll through the libraries to see if dupes, thumbs, original/modifies/etc. are showing up to boost the count from under 25K to 79K!
    Ideas? At least I know I'm not the only G5 dual user with this problem!
    --Sam
    G5 Dual 2.7 GHz 2 GB DDR SDRAM Mac OS X (10.4.4)
    G5 Dual 2.7 GHz 2 GB DDR SDRAM Mac OS X (10.4.4)

  • IPhoto: An error occurred while trying to save your photo library.

    "An error occurred while trying to save your photo library.
    Some recent changes may be lost. Make sure your hard disk has enough space and that iPhoto is able to access the iPhoto Library."
    Basically, the same issues as this thread:
    http://discussions.apple.com/thread.jspa?threadID=1588998&tstart=0
    I have tried the BatchMod with no luck. If it matters, this is on an external hard drive and I am the only user on this computer. Looking at the info of the library file, I have read/write/execute permissions and my group has read permissions only. I thought BatchMod would change these permissions but it doesn't seem to work.
    Actually, I restarted my computer and it works now. But I am still worried it might happen again. Has anyone else encountered this problem?
    Thanks.

    Welcome to the Apple Discussions. If it's working now it could have been a one time hiccup. Do you backup your library on a regular basis? If not you definitely should.
    If the library gets damaged/corrupted you won't lose your photos but can lose all of your organizational effort that you put into the library. If the external HD crashes then you will lose all.
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier versions) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. There are versions that are compatible with iPhoto 5, 6, 7 and 8 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
    NOTE: The new rebuild option in iPhoto 09 (v. 8.0.2), Rebuild the iPhoto Library Database from automatic backup" makes this tip obsolete.

  • Error Message: "An error occurred while trying to save your photo library."

    I am all of the sudden getting this error message while in iPhoto, seems to come up after I try to delete some photos:
    "*An error occurred while trying to save your photo library.* Some recent changes may be lost. Make sure your hard disk has enough space and that iPhoto is able to access the iPhoto Library."
    I have 83 GB of hard disk space available. Any help?

    Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
    Regards
    TD

  • An error occurred while attempting to save your User information!

    hi, when i try to update my address / tshirt size in my profile, i am getting this error..
    An error occurred while attempting to save your User information! Please try again later
    i have been trying this for the past 10 days,..
    can anyone help??
    Regards,
    Pradhiba

    please contact [email protected]

  • Why do I get: "An error occurred while trying to submit your post. Please try again."

    Hi, I get this error: "An error occurred while trying to submit your post. Please try again." when trying to reply to a post. Just started today. How can I resolve this?

    There are certain words and phrases which are banned because of spammers: if you inadvertently include one of these you usually get the message that you have included content which is not allowed.
    I've had the 'an error occurred' message several times; in each case I've copied the post, clicked the 'Cancel' button, waited a few seconds than then replied again, pasting in the text, and it's worked. It appears to be juste a server glitch.

Maybe you are looking for

  • Can anything be done about sound quality through the ear speaker?

    I tested the 4S in the store prior to purchase and thought call quality was fine.  However, in day-to-day reality it's proving to be a bit difficult.  My previous phone, an old Motorola Razr, produced nice crisp sound, whereas the iPhone tends toward

  • Error Installing CMSDK 9.0.3 on W2K/9.2.0.4

    Single node, db installed on workstation. Getting following error when verifying jserver components on database: java.lang.NoSuchFieldError: envCharSetId      at oracle.jdbc.oci8.OCIEnv.get_env_handleNative Method)      at oracle.jdbc.oci8.OCIEnv.get

  • Aperture Flag issue

    I can't see the yellow flag symbol anymore.  Also, everytime I hover over a picture I get all the metadata.  How can I turn visual of a flag on and visual of metadata off?  Thanks

  • Two item renderer for one datagrid column?

    hi i have one doubt can we use two item renderer for one datagrid column any possibilities why i am asking this because during drag and drop i need one itemrenderer and during application initialization i need another itemrenderer any possibilities k

  • Sound Blaster Audigy Gamer not being recogni

    Hi, I own the Sound Blaster Audigy Gamer. It had been working fine before I needed to update the drivers. When I tried to update the drivers it said that no Audigy Card was being detected and that the Setup would close. The first person at Creative I