An error occured with the publication of the album, an error occured with the publication of the album

Whenever i tried to open the photos in iphoto it return with the message "the error occured with the publication of the album". can anybody please help me? Thanks

Can you give us a step by step to the point where you get this message?

Similar Messages

  • I get error message: "An error occurred with the  publication of album...Authentication with server failed...whenever I open a facebook file in my iPhoto. In each file, most of my photos have disappeared. What do I need to do?

    I get error message: "An error occurred with the  publication of album...Authentication with server failed. Please check your login and password information" whenever I open a facebook file in my iPhoto. In each file, most of my photos have disappeared. I am hoping I can retrieve these "lost" files. What do I need to do?

    Message was edited by: leroydouglas
    better yet, try this solution:
    https://discussions.apple.com/message/12351186#12351186

  • I'm having trouble with my Ipod- I tried to restore it but keep getting a message - the ipod could not be restored. an unknown error occurred(1413)

    I'm having trouble with my Ipod- I tried to restore it but keep getting a message - the ipod could not be restored. an unknown error occurred(1413)
    Mt computer has been freezing up on me lately and I think it messed up my Ipod when it quit right in the middle of downloading and got shut off.

    That's because you jailbroke your phone. You can't get help here.

  • The document could not be saved. The server said: "The operation failed because an unexpected error occurred. (Result code 0×80020005)" Please ensure you have completed all required properties with the correct information and try again.

    I am having problems  saving documents back to SharePoint when any of the document properties (metadata columns) are set to be "managed metadata". The check-in/save fails with error:
    The document could not be saved. The server said:
    “The operation failed because an unexpected error occurred. (Result code 0×80020005)”
    Please ensure you have completed all required properties with the correct information and try again.
    I have seen similar threads that suggest this is a known issue with this version of Acrobat but I would like conformation from Adobe that this is a known issue and whether it is fixed in a newer version?
    Adobe Acrobat version 10.1.13
    SharePoint 2010

    Hi quodd,,
    We are sorry for the issue being faced by you. I need some information from you so that I take further steps:
    1. Which Adobe product are you using Acrobat or Adobe reader- what is the complete version?
    2. How are you opening and saving the PDF, the exact workflow?
         Are you doing it from within Adobe Reader/Acrobat application or opening it from browser, doing changes and saving it using browser itself.
    3. Can you try to save a PDF to library with Custom template and managed metadata columns using browser directly.
    4. Please verify that columns name do not contain spaces or some other special characters.
       Can you try to save PDF to library with Custom template and just a single managed metadata column  with a simple name
    Thanks,
    Nikhil Gupta

  • My IPhone 3GS is unlocked and i went to update the software and it said that an unknown error has occurred and said it needed to be restored to connect with Itunes. When i got to restore it, it gets about 3/4 of the way done, says an unknown error(1015)

    Hey guys. My IPhone 3GS is unlocked and i went to update the software and it said that an unknown error has occurred and said it needed to be restored to connect with Itunes. When i got to restore it, it gets about 3/4 of the way done, says an unknown error has occured(1015). I have no clue what to do and all and any help would be amazing.

    See Here
    https://discussions.apple.com/message/15290457#15290457
    From the More Like This  on the right...

  • Time Machine will not complete a system backup and terminates with "Unable to complete backup. An error occurred while copying files to the backup volume.  This follows a problem when Time machne terminated when the volume was almost full.

    On 11/1/2011, Time Machine (TM) terminated with an error message I did not record.  I noted that the drive was full and decided to do a separate complete bootable  system backup using Carbon Copy Clone (CCC), before clearing the TM volume and trying to start it over clean.  Part way through the full system backup CCC put up a message that there was a Physical Problem  "Library/Application Support/Techtool Protection/McIntosh HD/Directory Backup 2011-11-01-16-28-16".  That was about the time that TM malfunctioned, so I assumed they were related.  After starting CCC over a couple of times, and getting the same error message, I let it go through to completion of the backup, which took three or four hours.  I then ran tests using Disk Utility and verified that there was nothing physically wrong with both the internal hard drive and the TM volume.  I also erased and reformatted the TM volume.  However, every time I started Time Machine, it would record a few GB and terminate with "Unable to complete backup. An error occurred while copying files to the backup volume".  I restarted the computer with no change in results.  Note that prior to starting the CCC backup, I "Repaired Permissions", "zapped the PRAM" and "re-set the SMC", hoping to have a clean bootable system on the backup.  I ran Techtool and no problems were found.
    I'm running this on an Intel iMac under 10.5.8 and recording to a 500GB My Passport drive.  My hard drive is only about half full at 246 GB.  My assessment is that something happened at 16-28-16 on 11/1/2001 to screwup the Backup Directory in the file at "Library/Application Support/Techtool Protection/McIntosh HD/Directory Backup 2011-11-01-16-28-16". My question is, how do I fix it?
    I had just completed writing everything above here, explaining the problems I had been encountering for the past 24 hours.  I had the Time Machine window standing open on the desktop where I could see it, having recentlycleared it after the last termination.  As I was proofing what I had written, I looked at the window and noted that the clock had started a new run for a full back up, since all prior efforts had failed and the TM volume was empty.  As I watched and waited for it to fail again, as it had been doing at about 13 GB, it kept going and going until it just finished a complete backup, about 4.5 hours later, with my having done nothing.  Now my question would have to be - what could possiibly have happened to make it perform this way?   It will be interesting to see if it continue to operate normally, or if the problem will return, in a later backup run.

    jcm21 wrote:
    CCC put up a message that there was a Physical Problem  "Library/Application Support/Techtool Protection/McIntosh HD/Directory Backup 2011-11-01-16-28-16"
    You should not keep those files for long, and probably shouldn't back them up (if you need them at all -- since you do regular backups, I'm doubtful just how worthwhile that feature is).
    "Unable to complete backup. An error occurred while copying files to the backup volume".
    One of Apple's maddeningly incomplete messages. Most likely, there's a problem with a file (quite possibly the one CCC didn't like).  See #C3 in Time Machine - Troubleshooting for details and instructions on finding and fixing it.
    If you continue running the Directory Protection app, be sure to exclude your Time Machine drive from it (as it will just take up lots of room, and won't help repair your backups if there's a problem);  and exclude the folders it creates from being backed-up by Time Machine (as they'll create large backups, and you probably can't use the backed-up folders anyway), per #10 in Time Machine - Frequently Asked Questions.

  • TS1717 Hi, my iTunes application is not connecting to the iTunes store. It is coming up with the following error message "we could not complete your itune store request. An unknown error occured (11222)" Can you please assist?

    Hi, my iTunes application is not connecting to the iTunes store. It is coming up with the following error message "we could not complete your itune store request. An unknown error occured (11222)" Can you please assist?

    Hi Laura-Wedders,
    Thanks for visiting Apple Support Communities.
    On August 7th, some users may have been unable to make purchases from the App Store, iTunes Store, Mac App Store, or iBookstore. Apple worked quickly to resolve these issues, however you may have experienced them.
    To check the current status of these systems please see:
    Apple - Support - System Status
    http://www.apple.com/support/systemstatus/
    If you are still experiencing issues, you may want to troubleshoot with the following articles:
    Can't connect to the iTunes Store
    http://support.apple.com/kb/TS1368
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/TS3297
    All the best,
    Jeremy

  • I upgraded from Dreamweaver CS4 to CS6. but now "an TFP error occured - cannot make connection to host". I spent hours with the host technician and we cant find the error. I reinstalled DW4 and it connects to host perfectly. Anyone else seen this problem?

    I upgraded from Dreamweaver CS4 to CS6. but now when I want to upload I get "an TFP error occured - cannot make connection to host". I spent hours with the host technician and we cant find the error. I reinstalled DW4 and it connects to host perfectly. Anyone else seen this problem?
    Mac OS 10.8.5
    None of these issues are causing the error in DW CS6. We have double checked all of them and we have everything exactly right. Also I have exactly the same SiteSetup in DW CS4 and that works perfectly well. Could there must be factor in 6 that didn't exist in 4? Something that isnt in the SiteSetup but in some hidden dialog box ?
    I can also upload to my host using Fetch, a third party FTP. And as I said DW CS4 works fine. So the problem is not with my host, its with DW CS6 in particular.

    Thank you Jon, that fixed it perfectly. You have saved me from going crazy. The only difference I see now is in "Server Name" it changed what I had entered (my ftp address) to "Remote Server"; which seems odd -- but it works!   Although I know there maybe also some other dialog box I have never seen
    Of course I saw that menu item "Import"  and but I thought thats obviously not for me: "Why would I want to import an entire website?". I did not however see "Export the selected site" for thats only a tiny icon in the footer. However I would have thought the same:  "Why would I want to export my entire website?".
    An observation: I've seen this problem in a lot of Adobe software, the menu-names of items are  obscure, non descriptive. What would be better would be for the menu names or popups to say "Export Site Setup settings" and "Import Site Setup settings"

  • Upon sync or backup, I receive the message, "iTunes could not back up the iPhone "iPhone name" because and error occurred. I have deleted my backup file and tried another computer, with no success.  Also, the bluetooth function stopped working.

    Upon sync or backup, I receive the message, "iTunes could not back up the iPhone "iPhone name" because and error occurred. I have deleted my backup file and tried another computer, with no success.  Also, the bluetooth function stopped working.

    Hi, EJ13. 
    I see you are having issues with backing up you iPhone and have tried a couple troubleshooting steps.  There are a couple more steps I could recommend in the article below. 
    iOS: Troubleshooting backup issues in iTunes
    http://support.apple.com/kb/ts2529
    Regards,
    Jason H. 

  • HT4623 I am trying to update my i-phone 4 with IOS 7.1.1 it has twice got 400mB in to the 1.3GB update and then dropped out with an "error has occured" message.....any ideas?

    I-phone 4........I am being auto-prompted to update my IOS from 7.1 to 7.1.1. Each time I try to do that on i-tunes it gets to about 400Mb of the 1.3Mb file and then drops out with an "error has occured" message. I have 5Gb free space on the phone. I have tried to do that wirelessly also and it says "an error has occured while checking for a software update"........does anyone have any ideas?....thanx

    Dear Jody..jone5
    Good for you that can't update your iphone because I did it and my iphone dosen't work for example I can't download any app like Wecaht or Twitter..
    Goodluck
    Atousa

  • I have downloaded AI Trial but am getting a Configuration Error as follows 'A problem has occured with the licensing of this product. Restart your computer and re-launch the product.  If this problem still occurs after restarting, contact Customer Support

    I have downloaded AI Trial but on launching I am getting a Configuration Error which reads '
    A problem has occured with the licensing of this product. Restart your computer and re-launch the product.
    If this problem still occurs after restarting, contact Customer Support for further assistance, and mention the error code shown at the bottom of this screen.
    Error: 213:5.
    I have tried the restart suggestion, but the problem persists.
    Can anyone assist.
    TIm

    Tim,
    This may be one for this specialized forum (where you may be able find the answer from previous threads),
    http://forums.adobe.com/community/download_install_setup
    or for a chat,
    Creative Cloud support (all Creative Cloud customer service issues, chat open between 5AM and 7PM PST/PDT on workdays)
    http://helpx.adobe.com/x-productkb/global/service-ccm.html
    or for Adobe phone Support,
    http://helpx.adobe.com/adobe-connect/adobe-connect-phone-numbers.html

  • My SSD with a running Dreamweaver CS6 version crashed. Now a new SSD is installed and every time I try to reinstall DW CS6 the error " inconsistency in the installation programm database" (in german terms) occurs. I tried to delete everything concerning t

    My SSD with a running Dreamweaver CS6 version crashed. Now a new SSD is installed and every time I try to reinstall DW CS6 the error " inconsistency in the installation programm database" (in german terms) occurs. I tried to delete everything concerning to CS6, rebootet and so on - nothing worked. Two hours later I tried to install DW 5.5 - that worked. Afterwards I tried again to install 6.0 - without success. Can anybody help?

    Thank you for your answer. I could not find caps.db.
    Meanwhile I solved the problem as follows: I searched for "dreamweaver" everywhere an deleted everything I could find. Then I searched for "CS6" and did the same. I guess there were around 20 or more places where I deleted directorys or files. Suddenly the installation did not stop at 2 % what it always did before and the installation was a success :-) It cost me more than 4 hours to figure that out and I did not find a really helping hint somewhere. Adobe itself I could not contact because I could not find an email adress or a phone number - poor support for such an expensive software. For luck I did not have to deliver something just in time. Lacking a useful support is a really poor, poor attitude of Adobe... I think I will not buy anymore Adobe products - it could cost too much of my time... :-(

  • "An error occurred while attempting to load this plug-in."  I donloaded the Nik Collection, but when I try "export with preset" the only preset as an option is HDR Efex Pro 2.  The other plug ins appear in my applications folder, but I get the error messa

    I downloaded the Nik Collection, but when I try "export with preset" the only preset as an option is HDR Efex Pro 2.  The other plug ins appear in my applications folder, but I get the error message at the start of this post...I can us, say, Silver Efex stand alone, but I want to use as a plug in...can anyone help please..?

    Hi,
    Follow these instructions: Accessing the plug-ins from host applications - Nik Collection Help

  • TS4337 Ever since I updated the OSX (V 10.9.1) iCal can't be used, when I open it a message pops saying: The server responded with an error, couldn't move calendars to iCloud because an error occurred. I turned off icloud and the same keeps happening.

    Mail is not functioning right, as well as iWorks. And everything started to break down since I updated the OS please help!

    To check the local network for some of the common configuration problems, launch Terminal.app and issue the following diagnostic command:
    sudo changeip -checkhostname
    That'll report some local configuration information and then either no errors detected and no changes required, or it'll point to whatever configuration errors or issues it might detect.  That doesn't catch everything, but it catches the common errors.
    FWIW, 192.168.0.0/24 and 192.168.1.0/24 are poor choices for the local network, as VPNs are based on IP routing and IP routing gets tangled when the same subnet is used on both ends of the VPN. 192.168.0.0/24 and 192.168.1.0/24 are near ubiquitous in home networks and coffee shops.

  • A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (p

    A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that
    the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)(Microsoft SQL Server, Error: 2)
    The system cannot find the file specified
    Cannot connect to COWBOYS.
    Here are the technical details===================================
    A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider:
    Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
    For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%20SQL%20Server&EvtSrc=MSSQLServer&EvtID=2&LinkId=20476
    Error Number: 2
    Severity: 20
    State: 0
    Program Location:
       at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
       at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
       at System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, Boolean withFailover)
       at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean ignoreSniOpenTimeout, TimeoutTimer timeout, Boolean withFailover)
       at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance, SqlConnectionString connectionOptions, SqlCredential credential, TimeoutTimer
    timeout)
       at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(TimeoutTimer timeout, SqlConnectionString connectionOptions, SqlCredential credential, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance)
       at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, SqlCredential credential, Object providerInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance,
    SqlConnectionString userConnectionOptions, SessionData reconnectSessionData)
       at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, DbConnectionPoolKey poolKey, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection, DbConnectionOptions userOptions)
       at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup, DbConnectionOptions userOptions)
       at System.Data.ProviderBase.DbConnectionFactory.TryGetConnection(DbConnection owningConnection, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal oldConnection, DbConnectionInternal& connection)
       at System.Data.ProviderBase.DbConnectionInternal.TryOpenConnectionInternal(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
       at System.Data.ProviderBase.DbConnectionClosed.TryOpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
       at System.Data.SqlClient.SqlConnection.TryOpenInner(TaskCompletionSource`1 retry)
       at System.Data.SqlClient.SqlConnection.TryOpen(TaskCompletionSource`1 retry)
       at System.Data.SqlClient.SqlConnection.Open()
       at Microsoft.SqlServer.Management.SqlStudio.Explorer.ObjectExplorerService.ValidateConnection(UIConnectionInfo ci, IServerType server)
       at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser()
    ===================================
    The system cannot find the file specified
    I have tried from so many forms. This is so frustrating. Thank for everyone/anyone who wants to help. So this is what happened: I had to uninstall my previous sqlserver 2012(which worked great) for some reason, and I uninstalled everything from that download.
    Then I installed the trial edition of sql server 2012 (64 Bit) and It wouldn't connect to the database. (Error mentioned above.) My local DB is COWBOYS. (COWBOYS is also my computer name.) After this, I have tried downloading sqlexpress and sqlserver 64bit
    many times and cannot connect to my local DB. 
    How do I connect to my Local DB? 
    Also, I think this might help: (When I run sqlserve.exe, which I was able to find in C:\Program Files\Microsoft SQL Server\110\LocalDB\Binn, I get an error: Your SQL server installation is either corrupt or has been tampered with(Error getting
    instance ID from name). Please uninstall then re-run setup to correct this problem.
    I would happily re install it, if it wasn't my 20th time.
    I don't have any remote connections, I don't use username/password, only window authentication. I work mostly on visual studio, but without able to store /retrieve data, I don't know how to survive.
    May be the solution is very simple, but I am too frustrated. 
    Some of the things I have tried:
    From a command prompt, enter one of the following commands:
    net start "SQL Server Agent (MSSQLSERVER)" OR 
    net start "SQL Server Agent(instancename)"(for instance)
    on my sql configuration, I cannot start anything because there is nothing there to start. I can post more details, if that would help. Also, some more details about the error:
    Details
    Product:
    SQL Server
    ID:
    2
    Source:
    MSSQLServer
    Version:
    10.0
    Component:
    SQLEngine
    Message:
    An error has occurred while establishing a connection to the server. When connecting to SQL Server, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error:
    40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
    Explanation
    SQL Server did not respond to the client request because the server is probably not started.
    User Action
    Make sure that the server is started.
    Version:
    9.0
    Component:
    SQLEngine
    Message:
    An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error:
    40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
    Explanation
    SQL Server did not respond to the client request because the server is probably not started.
    User Action
    Make sure that the server is started.
    Any one that can help me, I will be greatful. Thank you so much. p.s. please ask me anything if you have any questions.

    It sounds like there are a couple things going on here.  First check if you have a successful install of SQL Server, then we'll figure out the connection issues.
    Can you launch SQL Server Configuration Manager and check for SQL Server (MSSQLSERVER) if default instance or SQL Server (other name) if you've configured your instance as a named instance.  Once you find this, make sure the service is started. 
    If not started, try to start it and see if it throws an error.  If you get an error, post the error message your hitting.  If the service starts, you can then launch SSMS and try to connect.  If you have a default instance, you can use the machine
    name in the connection dialog.  Ex:  "COWBOYS" where Cowboys is the machine name.  However, if you named the SQL Server instance during install, you'll need to connect using the machine\instance format.  Ex:  COWBOYS\Romo (where Romo
    is the instance name you set during install).
    You can also look at the summary.txt file in the SQL Server setup error logs to see what happened on the most recent install.  Past install history is archived in the log folder if you need to dig those up to help troubleshoot, but the most
    recent one may help get to the bottom of it if there is an issue with setup detecting a prior instance that needs to be repaired.
    Thanks,
    Sam Lester (MSFT)
    http://blogs.msdn.com/b/samlester
    This posting is provided "AS IS" with no warranties, and confers no rights. Please remember to click
    "Mark as Answer" and
    "Vote as Helpful" on posts that help you. This can be beneficial to other community members reading the thread.

  • The action could not be completed because of a conflict with the original item. The conflict may have occurred when an existing item was updated on another computer or device. Open the item again and try making your changes. If the problem continues, cont

    I have a user on an iMac 10.6 connected to our domain.  She uses Outlook web access for email on our exchange server.  Last week she received the following message which is randomly preventing her from sending emails.  She claims no attachment was involved in the original email when this all started.  I have not been able to look at her account as she is out of the office but maybe someone else dealt with this issue.  I realize this may not be Mac related but thought I'd give it a try.  She did say it occurred once over two days while working on a PC but it continued over the past weekend.
    If an internal user tries to send a message with infected attachment using Outlook Web Access, it may report the following error message: The action could not be completed because of a conflict with the original item. The conflict may have occurred when an existing item was updated on another computer or device. Open the item again and try making your changes. If the problem continues, contact technical support for your organization.
    This is because F-Secure Anti-Virus for Microsoft Exchange has detected a virus in the attachment. If the user tries to send the message again, the message will be sent but without the attachment. At the same time a blank message with an attachment named "Attachment_information.txt" will remain in the user's Drafts folder. The "Attachment_information.txt" will contain information about the virus detected in the message.

    PS - have found other posts indicating that clips smaller than 2s or sometimes 5s, or "short files" can cause this. Modern style editing often uses short takes ! Good grief I cannot believe Apple. Well I deleted a half a dozen short sections and can export, but now of course the video is a ruined piiece of junk and I need to re-do the whole thing, the sound etc. which is basically taking as much time as the original. And each time I re-do it I risk again this lovely error -50 and again trying to figure out what thing bugs it via trial and error instead of a REASONABLE ERROR MESSAGE POINTING TO THE CLIP IT CAN'T PROCESS. What a mess. I HATE this iMovie application - full of BUGS BUGS BUGS which Apple will not fix obviously, since I had this product for a few years and see just hundreds of hits on Google about this error with disappointed users. Such junk I cannot believe I paid money for it and Apple does not support it with fixes !!!
    If anyone knows of a GOOD reasonably priced video editing program NOT from APPLE I am still looking for suggestions. I want to do more video in future, but obviously NOT with iMovie !!!

Maybe you are looking for