An error occured within an XI interface: Exception occurredS:BBP_CF:037
Hi
I am getting an error as described below in XI . The error is while calling inbound proxy . This is a PurchaseOrderConfirmation in SRM system. has any one faced a similar exception ....how to debug this ...is it an error in abap code
An error occured within an XI interface: Exception occurredS:BBP_CF:037 -No confirmations could be entered for purchase order 4100007164 Programm: CX_BBP_BD_ERROR===============CP; Include: CX_BBP_BD_ERROR===============CM002; Line:
<?xml version="1.0" encoding="utf-8" ?>
- <nr1:StandardMessageFault xmlns:nr1="http://sap.com/xi/SRM/Basis/Global">
- <standard>
<faultText>An error occured within an XI interface: Exception occurredS:BBP_CF:037 -No confirmations could be entered for purchase order 4100007164 Programm: CX_BBP_BD_ERROR===============CP; Include: CX_BBP_BD_ERROR===============CM002; Line: 57</faultText>
</standard>
</nr1:StandardMessageFault>
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Call Inbound Proxy
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="ABAP">APPLICATION_ERROR</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="http://sap.com/xi/SRM/Basis/Global">StandardMessageFault</SAP:ApplicationFaultMessage>
<SAP:Stack>The application triggered an exception</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
thanks
Prashanth
Hi Prashanth,
Check these..
R/3(MM) -XI- SUS Scenario Error
PurchaseOrderConfirmation in SRM 4.0
cheers,
Prashanth
P.S Please mark helpful answers
Similar Messages
-
An error occurred within an XI interface: Exception occurred
Hi
I am doing a scenario in which I am integrating R3-XI-SUS for PO,PO Response, ASN,GR and INVOICE.
In which PO, PO Response and ASN working fine but when I am sending GR from R3 to SUS it is coming to XI correctly but it is received in SUS with error i SXMB_MONI it is showing following error:-
<b>An error occurred within an XI interface: Exception occurred A:BBP_PD:002 -Document already exists. Check your entries Programm:: CX_BBP_BD_ERROR===============CP; Include:CX_BBP_BD_ERROR===============CM002;</b>
What does this error means?
Do anyone have solution to this problem.
it's urgent
Thanks in advance
Thanks and Regards
SamiHi,
As far as I understand this issue is not related to XI. Itseems there is some configuration mistakes from the SUS side.
Please check with the functional consultant.
Regards,
Kumar
P.S: Reward Points if Helpful!!!!! -
An error occurred within an XI interface: Exception occurred A:BBP_PD:002
Hi
I am doing a scenario in which I am integrating R3-XI-SUS for PO,ASN,GR and INVOICE.
In which PO and ASN working fine but when I am sending GR from R3 to SUS it is coming to XI correctly but it is received in SUS with error shown below.
An error occurred within an XI interface: Exception occurred A:BBP_PD:002 -Document already exists. Check your entries Programm:: CX_BBP_BD_ERROR===============CP; Include:CX_BBP_BD_ERROR===============CM002;
Do anyone have solution to this problem
it's urgent
thanks in advance
thanks and regards
SamiHi
<b>Please see the following SAP OSS Notes, which will definitely help -></b>
Note 922190 - SRM-SUS: Confirmation response can not be identified in SUS
<u>Other related OSS Notes -></u>
Note 1026638 - GR Output Integration with MM-SUS Scenario for R/3 <= 47-
Note 1051424 - Incorrect display of SUS Confirmations status
Note 1026326 - Cannot accept GR with role SAP_EC_SUS_INVOICER
<b>Related links -></b>
SUS to SRM PurchaseOrderConfirmation error for limit order
Re: SRM ServiceAcknowledgementConfirmation fail going into SUS
Cancellation from SUS hangs in XI interface
Hope this will help.
Regards
- Atul -
Application Error occured within the XI Interface
Hi,
I am trying to get the payload from XI system to SRM system.
By looking in SXMB_MONI,
On XI side,the message has been sent successfully.
But
I am getting the following error while receiving the message on SRM side.
"An error occured within an XI interface: SLD system T90CLNT090 is not known Programm: SAPLBBP_BD_MAPPING_SAPXML1".
Could anybody please tell me what may be the problem?
Thanks and Regards,
Rohini.Mhi,
have a look at this thread:
Business system not known to SRM
it shows how to add a business system in SRM
Regards,
michal -
" +The underlying connection was closed: An unexpected error occurred on a receive..Exception.Message " OR sometimes
"The remote server returned an error: (503) Server Unavailable..Exception.Message"
Getting exception above when performing various operation (site coll creating, group creation, adding users to group) for sharepoint online (Office 365) site using powershell script.
I want to create 3500 site collections using PS script. In-between getting above exception so it will skip one site collection creating and working again. for eg. after creating 11 site coll, script will through above exception and so 12th site coll will
not be create but working fine from 13 and so on...Remote server seems working to me...any additional check?
if problem with remote server then may be loop to create site provisioning should not start again..Right?
any idea? -
Hii all,
I have a subscription which used to send report email daily 10 am morning
now today it does not sent an email the status i s showing above error message ..
why this occurs ?? at the time of subscription running time ??
i have checked there is not error of subscription it runs fine ..
only today errored ..
Kindly , help me
Dilip Patil..Hi Dilip,
Based on the error message "An error occurred within the report server database. This may be due to a connection failure, timeout or low disk condition within the database." it seems the issue is caused by the Report Server catalog databases are
corrupted.
To fix this issue, I suggest that you use the Reporting Services Configuration Manager to recreate the Report Server catalog databases. In addition, please make sure report server instance can connect to the report server database. For more details about Configure
a Report Server Database Connection (SSRS Configuration Manager), please see the following document:
http://msdn.microsoft.com/en-IN/library/ms159133.aspx
Besides, if the issue is caused by the connection to the SQL Server Reporting Services Report Server catalog database is timeout. Please refer to the following thread:
http://social.technet.microsoft.com/Forums/en-US/db4ca6c2-5445-4ff9-9f63-e20f3859cc70/error-throwing-microsoftreportingservicesdiagnosticsutilitiesreportserverstorageexception-an?forum=sqlreportingservices
If the problem is still existed, I would appreciate it if you could give us detailed error log, it will help us move more quickly toward a solution.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support -
users are able to pick the SSAS database and cube, it's at the final step and suddenly excel had this error:
The following system error occurred: the server threw an exception...
Other users have no such issues at all
any ideas?
thanks
--Currently using Reporting Service 2000; Visual Studio .NET 2003; Visual Source Safe SSIS 2008 SSAS 2008, SVN --Hi Cat_ca,
Glad to hear that your issue had been solved by yourself. Thank you for your sharing.
Regards,
Charlie Liao
TechNet Community Support -
Hi,
a big problem with our report server has appeared suddenly.
We are running the SQL Server 2008 R2 with a Report Server. But a .
I can connect to the Report Server Website and I can choose a report. But if I run the report, it will load endless without timeout message or other error messages.
I looked in the Report Server Log and find out this confusing error messages:
rshost!rshost!1680!01/21/2014-16:22:41:: e ERROR: WriteCallback(): failed to write in write callback.
rshost!rshost!1680!01/21/2014-16:22:41:: e ERROR: Failed with win32 error 0x0079, pipeline=0x00000000004ED8D0.
rshost!rshost!c20!01/21/2014-16:22:41:: e ERROR: HttpPipelineCallback::SendResponse(): failed async writing response.
rshost!rshost!c20!01/21/2014-16:22:41:: e ERROR: Failed with win32 error 0x0079, pipeline=0x00000000004ED8D0.
rshost!rshost!1680!01/21/2014-16:22:41:: v VERBOSE: HttpPipeline::DisconnectCallback: releasing pipeline=0x00000000004ED8D0.
httpruntime!ReportManager_0-1!c20!01/21/2014-16:22:41:: e ERROR: Failed in BaseWorkerRequest::SendHttpResponse(bool), exception=System.Runtime.InteropServices.COMException (0x80070079): The semaphore timeout period has expired. (Exception from HRESULT: 0x80070079)
at Microsoft.ReportingServices.HostingInterfaces.IRsHttpPipeline.SendResponse(Void* response, Boolean finalWrite, Boolean closeConn)
at ReportingServicesHttpRuntime.BaseWorkerRequest.SendHttpResponse(Boolean finalFlush)
library!ReportManager_0-1!c20!01/21/2014-16:22:41:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ReportServerHttpRuntimeInternalException: RsWorkerRequest::FlushResponse., Microsoft.ReportingServices.Diagnostics.Utilities.ReportServerHttpRuntimeInternalException:
An internal or system error occurred in the HTTP Runtime object for application domain ReportManager_MSSQLSERVER_0-1-130347907277948893. ---> System.Runtime.InteropServices.COMException (0x80070079): The semaphore timeout period has expired. (Exception
from HRESULT: 0x80070079)
at ReportingServicesHttpRuntime.BaseWorkerRequest.SendHttpResponse(Boolean finalFlush)
at ReportingServicesHttpRuntime.RsWorkerRequest.FlushResponse(Boolean finalFlush)
--- End of inner exception stack trace ---;
httpruntime!ReportManager_0-1!c20!01/21/2014-16:22:41:: e ERROR: Failed in BaseWorkerRequest::SendHttpResponse(bool), exception=System.Runtime.InteropServices.COMException (0x80070079): The semaphore timeout period has expired. (Exception from HRESULT: 0x80070079)
at Microsoft.ReportingServices.HostingInterfaces.IRsHttpPipeline.SendResponse(Void* response, Boolean finalWrite, Boolean closeConn)
at ReportingServicesHttpRuntime.BaseWorkerRequest.SendHttpResponse(Boolean finalFlush)
library!ReportManager_0-1!c20!01/21/2014-16:22:41:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ReportServerHttpRuntimeInternalException: RsWorkerRequest::FlushResponse., Microsoft.ReportingServices.Diagnostics.Utilities.ReportServerHttpRuntimeInternalException:
An internal or system error occurred in the HTTP Runtime object for application domain ReportManager_MSSQLSERVER_0-1-130347907277948893. ---> System.Runtime.InteropServices.COMException (0x80070079): The semaphore timeout period has expired. (Exception
from HRESULT: 0x80070079)
at ReportingServicesHttpRuntime.BaseWorkerRequest.SendHttpResponse(Boolean finalFlush)
at ReportingServicesHttpRuntime.RsWorkerRequest.FlushResponse(Boolean finalFlush)
--- End of inner exception stack trace ---;
The last think I have done, is to grant a new user access to the report server website (by using the site options) and to the root folder (by using the folder options on ws).
But the error must not relate to the new user. The server was not touched for several days before.
Could you plz help me? I have no idea what to do.
Googling the whole day to find a solution without successWe are having the same issue with our production reporting server and it doesn't look like a permission issue. We are running the SSRS service as a domain account with administrative privileges on the server. We are seeing the following entry in the log
file:
rshost!rshost!1254!01/30/2014-13:06:04:: e ERROR: WriteCallback(): failed to write in write callback.
rshost!rshost!1254!01/30/2014-13:06:04:: e ERROR: Failed with win32 error 0x0079, pipeline=0x0000000003484370.
rshost!rshost!1198!01/30/2014-13:06:04:: e ERROR: HttpPipelineCallback::SendResponse(): failed async writing response.
rshost!rshost!1198!01/30/2014-13:06:04:: e ERROR: Failed with win32 error 0x0079, pipeline=0x0000000003484370.
httpruntime!ReportManager_0-1!1198!01/30/2014-13:06:04:: e ERROR: Failed in BaseWorkerRequest::SendHttpResponse(bool), exception=System.Runtime.InteropServices.COMException (0x80070079): The semaphore timeout period has expired. (Exception from HRESULT: 0x80070079)
at Microsoft.ReportingServices.HostingInterfaces.IRsHttpPipeline.SendResponse(Void* response, Boolean finalWrite, Boolean closeConn)
at ReportingServicesHttpRuntime.BaseWorkerRequest.SendHttpResponse(Boolean finalFlush)
library!ReportManager_0-1!1198!01/30/2014-13:06:04:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ReportServerHttpRuntimeInternalException: RsWorkerRequest::FlushResponse., Microsoft.ReportingServices.Diagnostics.Utilities.ReportServerHttpRuntimeInternalException:
An internal or system error occurred in the HTTP Runtime object for application domain ReportManager_0-1-130355206125382999. ---> System.Runtime.InteropServices.COMException (0x80070079): The semaphore timeout period has expired. (Exception from HRESULT:
0x80070079)
at ReportingServicesHttpRuntime.BaseWorkerRequest.SendHttpResponse(Boolean finalFlush)
at ReportingServicesHttpRuntime.RsWorkerRequest.FlushResponse(Boolean finalFlush)
SSRS version is 10.50.4270.0
Regards,
Augustine. -
Adobe Media Encoder Error Compiling movie Unknown Error occurs within 1-2 minutes of Exporting
I've looked at a number of threads about this, and none seem to solve the issue. I am using the Mac version of PPRO CS6, with AVCHD h.264 source clips (mts) directly, and the timeline will play the program, but I did noticed that certain cuts the program video is still for that cut, but the encoding error does not fail in those cuts, so its puzzling. I've tried different output formats, and each will fail at a different point. There are only 4 video clips (all identical format and frame rate) in this, but I have 180 cuts from the 4 clips. There are no graphics, titles, effects, stills.. none of that - just straight cuts. Only a fade in the beginning and fade out at end I also will get the same error if I render the sequence (also at a different point, in the middle of a cut), with a same error. The total length of the edited sequence is 22 minutes, the source clips are well over 3GB each. So to convert to another format would take forever, so that's why its kept in original format. Anyone found a solution?
That error can happen for many reasons...one of the reasons that I occassionaly get it is because I try exporting a movie to an external drive that has been formated in the old FAT32 instead of the NTSF standard. FAT32 only allows for file sizes up to 2 gigs. And as soon as it reaches that...I would get that error. I don't know if that is why you are getting that error...but it would be easy to check. 1) are you generating a file that is over 2 gigs? 2) is your drive that you are exporting to FAT 32 (just right click the drive in My Computer and select "properties" then just look for what it says next to "file system".
-
Hello
We just had this error today. We did not do ANY changes to our existing ReportServer database neither to our reports.
Our infrastructure - we have sharepoint 2010 and sql server 2008 r2 with reporting services installed.
I confirmed the following:
-->Disk space on database server OK:
-->ReportServer database not corrupted - I restored the database to my test server and ran DBCC CheckDB.
I am now looking at the Activity Monitor and have noticed that several SPID executed by the ReportServer database are blocked by a SPID executed by the ReportServerTempDB.
Would blocking be a possible cause to this problem?
Thank you all in advanceTake a look into this http://support.microsoft.com/kb/2146315
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence -
Exception occurredE:BBP_PD:058 -Enter a currency E:BS:002
Hi All,
We are using MM-SUS scenario with SRM 5.0 and ECC 6.0 as the backend.
We have an issue while sending the purchase order from the MM to the SUS system.
The PO reaches the SUS system and our SXMB_MONI shows the following error message :
An error occured within an XI interface: Exception occurredE:BBP_PD:058 -Enter a currency E:BS:002 -"Create" is not allowed (SUS Confirmation XXXXXXX ) Programm:
This is happening for some POs and DS's(SA), the reason for which we are not able to find.
There is a OSS note Note 817380 - You cannot create a scheduling agreement release in SUS, with the same error text but these corrections already exist in our system.
Can anyone faced the same issue?
Can anyone give any links/suggestions/OSS for this particular issue?
Best regards,
SridharHi,
Please look at the below link. Shd solve your problem.
Error in SUS PO creation
Rgds,
RRK
Do reward points -
Getting the following error message occanssionally while doing a commit operation in toplink.
Exception [TOPLINK-7061] (OracleAS TopLink - 10g (9.0.4) (Build 031126)): oracle.toplink.exceptions.ValidationException
Exception Description: Exception occurred within JTS.
Internal Exception: javax.transaction.RollbackException
at oracle.toplink.exceptions.ValidationException.jtsExceptionRaised(ValidationException.java:552)
at oracle.toplink.jts.JTSExternalTransactionController.commitTransaction(JTSExternalTransactionController.java:72)
at oracle.toplink.publicinterface.Session.commitExternalTransaction(Session.java:514)
at oracle.toplink.publicinterface.UnitOfWork.commitInternallyStartedExternalTransaction(UnitOfWork.java:872)
at oracle.toplink.publicinterface.UnitOfWork.commit(UnitOfWork.java:729)at
org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:484)
at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274)
at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:525)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
at oracle.security.jazn.oc4j.JAZNFilter.doFilter(Unknown Source)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:604)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:317)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:793)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:208)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:125)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
at java.lang.Thread.run(Thread.java:534)
Caused by: javax.transaction.RollbackException
at com.evermind.server.ApplicationServerTransaction.commit(ApplicationServerTransaction.java:712)
at com.evermind.server.ApplicationServerTransactionManager.commit(ApplicationServerTransactionManager.java:434)
at oracle.toplink.jts.JTSExternalTransactionController.commitTransaction(JTSExternalTransactionController.java:69)
... 27 more
Message was edited by:
user615412JTA spec. says that TransactionManager.commit method throws RollbackException "to indicate that the transaction has been rolled back rather than committed."
For some reason the transaction has been rolled back (timed out? marked for rollback? smth else?). -
RemoteException: 111 java.rmi.ServerError: Error occurred in server thread
Hi,
I'm just new to the RMI field of JAVA. I'm trying to write a program that import the math.jar file in the server side. And the client end can invoke the methods of math.jar and get the value.
I got the error messages as below:
RemoteException: 111 java.rmi.ServerError: Error occurred in server thread; nested exception is:
java.lang.NoClassDefFoundError: org/mathwhizz/Heron
It can work well if I use source classes(*.class) directly instead of importing math.jar. The failure only happened when I try to make use of jar file. Thus I guess my setup and configuration should be ok. Is there anything I should be very careful if I try to run RMI and import a jar file in the program of server side ?
Do I need to use JNLP and web start application in this issue?
I'm appreciated for your responses...thanks...
Sincerely,
BrandonI've got a problem with rmi, when I launch my server, I have this error:
Erreur du remote: java.rmi.ServerError: Error occurred in server thread; nested exception is:
java.lang.NoClassDefFoundError: com/borland/dx/dataset/DataSetData
Help me please
Thank you -
How to capture the record value, when an error occurs
Hi , can you please help us in achieving the below requirement.
i have source with 10 accounts , i have to update the 5 target tables for the 10 accounts, i am using a for loop to do insert/update operations.
when an primary key/unique constraint error occurs while doing the insert/update operations, i want to catpure that account number along with the
error message and store in a table.
right now i am using sqlerrm,sqlcode in my exception block to capture the oracle error code and error message,i need to capture the account number along with this message. please tell me how to achieve this ...
thanksif you want to log the error in the table and keep going with the rest of them you might want to check out bulk collection exception handling.
http://psoug.org/reference/array_processing.html
CREATE OR REPLACE PROCEDURE forall_errors IS
TYPE myarray IS TABLE OF tmp_target%ROWTYPE;
l_data myarray;
CURSOR c IS
SELECT table_name, num_rows
FROM all_tables;
errors PLS_INTEGER;
dml_errors EXCEPTION;
PRAGMA EXCEPTION_INIT(dml_errors, -24381);
BEGIN
OPEN c;
LOOP
FETCH c BULK COLLECT INTO l_data LIMIT 100;
-- SAVE EXCEPTIONS means don't stop if some DELETES fail
FORALL i IN 1..l_data.COUNT SAVE EXCEPTIONS
INSERT INTO tmp_target VALUES l_data(i);
-- If any errors occurred during the FORALL SAVE EXCEPTIONS,
-- a single exception is raised when the statement completes.
EXIT WHEN c%NOTFOUND;
END LOOP;
EXCEPTION
WHEN dml_errors THEN
errors := SQL%BULK_EXCEPTIONS.COUNT;
dbms_output.put_line('Number of DELETE statements that
failed: ' || errors);
FOR i IN 1 .. errors
LOOP
dbms_output.put_line('Error #' || i || ' at '|| 'iteration
#' || SQL%BULK_EXCEPTIONS(i).ERROR_INDEX);
dbms_output.put_line('Error message is ' ||
SQLERRM(-SQL%BULK_EXCEPTIONS(i).ERROR_CODE));
END LOOP;
WHEN OTHERS THEN
RAISE;
END forall_errors;
/ -
Been struggling to resolve this error since yesterday in Flash Builder 4.7 packaging an app for iOS.
Error occurred while packaging the application:
Exception in thread "Main Thread" java.lang.UnsatisfiedLinkError: Can't load library: C:\Program Files\Adobe\Adobe Flash Builder 4.7 (64 Bit)\eclipse\plugins\com.adobe.flash.compiler_4.7.0.349722\AIRSDK\lib\aot\lib\llvm.dll
at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1706)
at java.lang.Runtime.load0(Runtime.java:770)
at java.lang.System.load(System.java:1004)
at adobe.abc.LLVMEmitter.loadJNI(LLVMEmitter.java:587)
at adobe.abc.LLVMEmitter.<clinit>(LLVMEmitter.java:597)
at com.adobe.air.ipa.AOTCompiler.generateExtensionsGlue(AOTCompiler.java:419)
at com.adobe.air.ipa.AOTCompiler.generateMachineBinaries(AOTCompiler.java:1790)
at com.adobe.air.ipa.IPAOutputStream.createIosBinary(IPAOutputStream.java:378)
at com.adobe.air.ipa.IPAOutputStream.finalizeSig(IPAOutputStream.java:762)
at com.adobe.air.ApplicationPackager.createPackage(ApplicationPackager.java:91)
at com.adobe.air.ipa.IPAPackager.createPackage(IPAPackager.java:246)
at com.adobe.air.ADT.parseArgsAndGo(ADT.java:571)
at com.adobe.air.ADT.run(ADT.java:419)
at com.adobe.air.ADT.main(ADT.java:470)Update:
My previous proposed solution (of installing the 64-bit JRE) resulted in a different problem. After multiple attempts and restarts I was unable to work in the Flash Builder IDE as it became unresponsive on load. Each time I had to use Task Manager to close the application.
Apparent Solution:
Close all applications running in Windows
Uninstall all versions of JRE (Java Runtime Environment)
Uninstall Flash Builder 4.7
Reinstall Flash Builder 4.7
Maybe you are looking for
-
My payment has been declined.
Hi, I made a purchse for an iPad Mini on November 3rd, 2012 and everything was great, I had no issues with my Debit/Visa Card at the time of purchase. But then a week or so after I went to check my status of my order and it said this: "Payment action
-
Report needed - Open materials on PO, sorted by material and not PO number
Hello, I've been trying to obtain a report that can give me a list of materials that are open for all PO numbers. Instead of this being sorted by PO number, I want it sorted by material number. I've gone through all the ME2 transactions (i.e. ME2L,
-
I use the Account Status Report pretty frequently but I want to add criteria. I want to just have the customers with a balance due of less than $1.00. Is there any way of doing it within the application? If not where is the script that creates the re
-
Mac Mini v iMac as Media Centre
Quick question (sorry - being a pest today) I already have a powerbook G4 (which I'll upgrade in a year or so) but I was all set to buy a mac mini for use as a media centre with Front Row to play my DVDs, movie files, iTunes stuff etc. However, I'm j
-
I did a past and copy and I really liked the font - I did a right click to open fonts and went back and forth between the fonts that I had and the font that got pasted and the FONT box did not show what the FONT names were. Any idea on how to find th