An error occurred calling 'LogMultipleResults' in 'ITSDBLog' of 'zNI TestStand Database Logging'

A test rig that worked fine started thowing the floowing error for me.
See screen capature.
Problem doesn't appear on the development PC.
The code that I'm using is using the default settings for logging to the access database that ships with TS. All worked fine for a few weeks now it keeps ... breaking.
An error occurred calling 'LogMultipleResults' in 'ITSDBLog' of 'zNI TestStand Database Logging'
An error occurred executing a statement.
Statement: STEP_RESULT.
Description: The changes you requested to the table were not successful because they would create duplicate values in the index, primary key, or relationship. Change the data in the field or fields that contain duplicate data, remove the index, or redefine the index to permit duplicate entries and try again.
Number: -2147217887
NativeError: -105121349
SQLState: 3022
Reported by: Microsoft JET Database Engine
Source: TSDBLog
Attachments:
NIDBerror.png ‏17 KB

Hello,
As far as I remember the DB size was approx ~ 1.5 GB, I don't have access to that test station till Wednesday so I'll double check but it could be as simple as exceeding the DB size, I'll verify that when I'm on-site again.
To answer a few questions from Scott:
1) I'm using TestStand 2012 ( as it came with the installation disks shipped in the first quarter of this year ).
The test station is offline so no updates have been applied since the install.
2) I'm using the default NI Schema and an Access DB. ( No modifications have been made )
3) I'm using the On-The-Fly feature logging feature both to ATML and the DB.
ATML works with no issues, DB used to work fine until it refused.
4) Fails every time when I start the sequence, disabling logging to the Database sorts the issue out.
5) I originally used the BatchUUT.seq example that ships with test stand.
I have developed a test that has three test sockets that have a common Initialize, Run Tests in parralel and have a sequence of common test steps.
Scott:
The issue you've sent speaks of UUIDCreate; I'm gettin issues with the STEP_RESULT .... I think these things are not related.
Secondly I'm suing TS 2012 so a fix should have been propagated to my version.
So to answer your question I'm using multiple processes on one computer.
I will emphasize that everything worked fine up to a certain point ... so I'm guessing Doug might be right on the money with the fact that I've chosen a misfortunate Database ( Access ) for the job.
Regards,
Maciej

Similar Messages

TestStand 4.2: error occurred calling 'LogResults' in 'ITSDBLog' of 'zNI TestStand Database'

Can anyone explain what could possibly be causing this to occur randomly?
Attachments:
Database Initialization Error.PNG ‏75 KB

Usually I see that error when I try to log a step in a model or engine callback. Some of the callbacks that are already in the model have logging turned off for the sequence but if you create your own callbacks then you may need to turn that off for them or just don't have any steps log data when clients override.
Hope this helps,
jigg
CTA, CLA
teststandhelp.com
~Will work for kudos and/or BBQ~

An error occurred calling 'LogResults' in 'ITSDBLog' of 'DBLog 1.0 Type Library'

HI,
I'm getting this run-time error:
Details: An error occurred calling 'LogResults' in 'ITSDBLog' of 'DBLog 1.0 Type Library'
An error occurred executing a statement.
Schema: ATE_database_multiplePC.
Statement: STEP_RESULT.
Unknown variable or property name 'TS_LoggingTemplate'.
Error accessing item 'Locals.TS_LoggingTemplate.ExecutionOrder'.
Source: TSDBLog
Error Code: -17306; Unknown variable or property name.
Location: Step 'Log Results to Database' of sequence 'Log To Database' in 'Database.seq'
What does it mean?
How to resolve this?
I can't fine the property 'TS_LoggingTemplate'...where does TS looking for it?
It seems as if TS is looking for local called 'Locals.TS
_LoggingTemplate.ExecutionOrder'. In what sequence? I couldn't find it in my sequence or Databse.seq or SequentialModel.seq
Thanks
Rafi
TestStand 3.0

Rafi -
Locals.TS_LoggingTemplate is a temporary variable that the On-The-Fly feature of the Database Logging component creates to manage state while attempting to log results as it goes.
I assume that you are using a custom schema and that you are attempt to log on the fly. It appears that the custom schema definition is confusing the database logging component in a way that we did not expect, so the error message is not very clear.
In general if you are developing a custom schema, you should test the schema with On-The-Fly off first, get it working and then turn it back on.
Questions:
1) If you turn off On-The-Fly logging, do results log properly?
2) Can you post your TestStandDatabaseOptions.ini in the TestStand config directory.
Scott R
ichardson (NI)
Scott Richardson
National Instruments

Error occurred while processing SAP SQL Tools for SQLServer (Database Copy)

Hello,
We are currently running ERP 6 EP4 support stacks 6. Two weeks ago we
refreshed our sandbox from QAS system and installed support stack 9 for
testing. Kernel was also upgraded from sp69 to sp137 as a part of the
support pack installation.
This week, I was asked to do another refresh of sandbox from the QAS system. As the
kernel was upgraded before to sp139, I copied back the previous kernel
file sp69 to the kernel folder and started refresh process as usual.
When I was running SAP for SQL, it ran successfully thorugh all the
steps but failed in the final steps with the following error logs:
=======================================================================
An error occurred while processing option SAP Toools for MS SQL Server
> Database Copy Completion( Last error reported by the step: System
call failed. Error 2 (The system cannot find the file specified. ) in
execution of system call 'CreateProcessAsUser' with parameter ( ,
NULL, Program Files/sapinst_instdir/MSS/CPY, &StartupInfo,
&ProcessInfo), line (631) in file (synxcchapp.cpp), stack trace:
iaxxejsctl.cpp: 272: EJS_ControllerImpl::executeScript()
d:\depot\bas\710_rel\bc_710-3_rel\gen\optu\ntamd64
\ins\sapinst\impl\src\ejs\iaxxejsbas.hpp: 450:
EJS_Base::dispatchFunctionCall() iaxxejsexp.cpp: 178:
EJS_Installer::invokeModuleCall() synxcchapp.cpp: 228:
CSyChildApplicationImpl::start(false) synxcchapp.cpp: 252:
CSyChildApplicationImpl::doStart() .). You can now:
Choose Retry to repeat the current step.
Choose View Log to get more information about the error.
Stop the option and continue with it later.
Log files are written to C:\Program Files/sapinst_instdir/MSS/CPY.

I looked at the logs, very similar error to the one that I already posted:
ERROR      2011-07-08 09:29:49.861
           CJSlibModule::writeError_impl()
MUT-03025 Caught ESyException in Modulecall: At line 631 file synxcchapp.cpp
Call stack:
iaxxejsctl.cpp: 272: EJS_ControllerImpl::executeScript()
d:\depot\bas\710_rel\bc_710-3_rel\gen\optu\ntamd64\ins\sapinst\impl\src\ejs\iaxxejsbas.hpp: 450: EJS_Base::dispatchFunctionCall()
iaxxejsexp.cpp: 178: EJS_Installer::invokeModuleCall()
synxcchapp.cpp: 228: CSyChildApplicationImpl::start(false)
synxcchapp.cpp: 252: CSyChildApplicationImpl::doStart()
System call failed. Error 2 (The system cannot find the file specified.
) in execution of system call 'CreateProcessAsUser' with parameter (<token>, NULL, <command line for executable saplicense.exe, NULL, NULL, TRUE, 0x420, NULL, C:/Program Files/sapinst_instdir/MSS/CPY, &StartupInfo, &ProcessInfo), line (631) in file (synxcchapp.cpp), stack trace: iaxxejsctl.cpp: 272: EJS_ControllerImpl::executeScript()
d:\depot\bas\710_rel\bc_710-3_rel\gen\optu\ntamd64\ins\sapinst\impl\src\ejs\iaxxejsbas.hpp: 450: EJS_Base::dispatchFunctionCall()
iaxxejsexp.cpp: 178: EJS_Installer::invokeModuleCall()
synxcchapp.cpp: 228: CSyChildApplicationImpl::start(false)
synxcchapp.cpp: 252: CSyChildApplicationImpl::doStart()
TRACE      2011-07-08 09:29:49.861 [iaxxejsbas.hpp:488]
           EJS_Base::dispatchFunctionCall()
JS Callback has thrown unknown exception. Rethrowing.
ERROR      2011-07-08 09:29:49.875 [sixxcstepexecute.cpp:971]
FCO-00011 The step doLI with step key |SAPMSSTOOLS|ind|ind|ind|ind|0|0|MssSysLI|ind|ind|ind|ind|7|0|doLI was executed with status ERROR ( Last error reported by the step: System call failed. Error 2 (The system cannot find the file specified.
) in execution of system call 'CreateProcessAsUser' with parameter (<token>, NULL, <command line for executable saplicense.exe, NULL, NULL, TRUE, 0x420, NULL, C:/Program Files/sapinst_instdir/MSS/CPY, &StartupInfo, &ProcessInfo), line (631) in file (synxcchapp.cpp), stack trace: iaxxejsctl.cpp: 272: EJS_ControllerImpl::executeScript()
d:\depot\bas\710_rel\bc_710-3_rel\gen\optu\ntamd64\ins\sapinst\impl\src\ejs\iaxxejsbas.hpp: 450: EJS_Base::dispatchFunctionCall()
iaxxejsexp.cpp: 178: EJS_Installer::invokeModuleCall()
synxcchapp.cpp: 228: CSyChildApplicationImpl::start(false)
synxcchapp.cpp: 252: CSyChildApplicationImpl::doStart()
TRACE      2011-07-08 09:29:49.886
Call block:CallBackInCaseOfAnErrorDuringStepExecution
    function:CallTheLogInquirer
is validator: true

"An error occurred during activation. Try again." Can't log into iMessage on Macbook for past two weeks.

iMessage worked fine on my Macbook until about two weeks ago. I can use iMessage for gMail, but my iCloud account is inactive and I get the error message "An error occurred during activation. Try again." when I try to log in with any apple ID. It works fine currently on my iMac and my iOS devices.
I have tried many suggestions, including checking the serial number, various time & date configurations, trying an alternate Apple ID, restarting, signing in and out of iCloud, and inspecting the keychain.

This could be a complicated problem to solve, as there are many possible causes for it. Test after taking each of the following steps that you haven't already tried. Back up all data before making any changes.
Before proceeding, test on another network, if possible. That could be a public Wi-Fi hotspot, if your computer is portable, or a cellular network if you have a mobile device that can share its Internet connection. If you find that iMessage works on the other network, the problem is in your network or at your ISP, not in your computer.
Step 1
Check the status of the service. If the service is down, wait tor it to come back up. There may be a localized outage, even if the status indicator is green.
Step 2
Sign out of iMessage on all your Apple devices. Log out and log back in. Try again to sign in.
Step 3
Restart your router and your broadband device, if they're separate. You may have to skip this step if you don't control those devices.
Step 4
From the menu bar, select
 ▹ About This Mac
Below the "OS X" legend in the window that opens, the OS version appears. Click the version line twice to display the serial number. If the number is missing or invalid according to this web form, take the machine to an Apple Store or other authorized service center to have the problem corrected.
Step 5
Take the steps suggested in this support article. If you don't understand some of the steps or can't carry them out, ask for guidance.
Step 6
From the menu bar, select
 ▹ System Preferences ▹ Network
If the preference pane is locked, click the lock icon in the lower left corner and enter your password to unlock it. Then click the Advanced button and select the Proxies tab. If the box marked SOCKS Proxy is checked, uncheck it. You don’t need to change any other settings in the window. Click OK and then Apply. Test.
The result may be that you can't connect to the Internet at all. Revert the change if that happens, or if iMessage still doesn't work. Remember that you must Apply any changes you make in the preference pane before they take effect.
Step 7
Select from the menu bar
 ▹ System Preferences… ▹ Flash Player ▹ Storage
and click
Block all sites from storing information on this computer
Close the preference pane.
Step 8
Make sure you know the ID and password you use with iMessage. Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
Use the search box in the toolbar of the Keychain Access window to find and delete all items with "iMessage" or "com.apple.idms" in the name. Log out and log back in.
Step 9
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
If iMessage worked in the guest account, stop here and post your results.
Step 10
Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you start up, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. After testing, restart as usual (i.e., not in safe mode) and test again.
If iMessage worked in safe mode, but still doesn't work when you restart in "normal" mode, stop here and post your results.
Step 11
Reset the NVRAM.
Step 12
Reinstall OS X.
Step 13
If none of the above steps resolves the issue, make a "Genius" appointment at an Apple Store, or contact Apple Support.

An error occurred while creating and opening the C++ browsing database file.

Hi,
I am getting the following error. I tried to download the x86 and x64 versions of SQL Server Compact 3.5 & CE 4.0 and installed but that is not working. I tried with changing location of the project and its not working too. I am using windows 7 enterprise
and VS 2010 professional SP1. Many thanks in advance.
Arshad
I have tried the solutions on the following links but no one worked :(
http://social.msdn.microsoft.com/Forums/en-US/vcgeneral/thread/98f2441b-a50a-4d43-9200-9ca972d4ac86
http://social.msdn.microsoft.com/Forums/en-US/Vsexpressvc/thread/53e4b057-e0e2-42c6-9320-792bb7b82089
http://social.msdn.microsoft.com/Forums/en-US/vssetup/thread/20d33b1b-d287-4f29-84c5-4ffb84c66b7c
I have
*Uninstalled and reinstalled both 32-bit and 64-bit versions of Microsoft SQL Server Compact 3.5 Service Pack
* Verified any existing .sdf is deleted
*Verified directory that .sdf is supposed to be written to is writable (I do see the .opensdf when it tries to create the sdf)
*Ran a repair of visual studio
*Uninstalled completely VS and Sql Server then reinstalled it.
None of this fixes the problem for me? Please help.
Muhammad Arshad Awan
Muhammad Arshad Awan

Hi,
I have solved the issue as below:
This error was started when I install a software which I have made myself and it uses sql server compact edition 3.5.
I saw when I manually replaced the sql related files from "C:\Program Files (x86)\Microsoft SQL Server Compact Edition\v3.5" with the files which my software setup had "version 3.5.5386.0" then the error started. And if copy back the latest version 3.5.8080.0
then it disappear. So use latest sql files in your software too.
My software was replacing the the latest files with older version.
Muhammad Arshad Awan

UC560 An error occured while configuring the device. To generate troubleshooting logs, choose help-support information - troubleshooting logs,

Hi,
I'm trying to configure UC560 using CCA.After configuring all the parameters and when i press APPLY CONFIGURATION, the following dialog box appears.
Kindly suggest.

Untick the "Use PKI Client Certificate when available" in the Site Properties. I would create a self-signed certificate for the DP. Don't forget to Update DP for all your boot images when you are finished.
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

MySQL syntax error with TestStand 4.0 database logging

I had been using MS Access database to log results which worked fine but the access database is too limited. Switched to MySql. Database works fine and I can query it from Visual C++ and was able to create all my result tables fine from TestStand.
I get a syntax error when actually trying to log results and it has to do with either a missing quote or and extra quote, I can't quite tell. I thought I saw a post on this somewhere but can't find it now. Here is the complaint from TestStand:
An error occurred calling 'LogOneResult' in 'ITSDBLog' of 'zNI TestStand Database Logging'
An error occurred executing a statement.
Statement: UUT_RESULT.
[MySQL][ODBC 3.51 Driver][mysqld-5.0.45-community-nt]You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near 'DEFAULT VALUES' at line 1
Description: [MySQL][ODBC 3.51 Driver][mysqld-5.0.45-community-nt]You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near 'DEFAULT VALUES' at line 1
Number: -2147467259
NativeError: 1064
SQLState: 37000
Reported by: Microsoft OLE DB Provider for ODBC Drivers
Description: Multiple-step OLE DB operation generated errors. Check each OLE DB status value, if available. No work was done.
Number: -2147217887
NativeError: 0
SQLState: 37000
Reported by: Microsoft OLE DB Provider for ODBC Drivers
Source: TSDBLog
And here is all that appears in the MySql logfile:
INSERT INTO UUT_RESULT DEFAULT VALUES
070914
You can't see it here but the string is truncated after the word VALUES. The next line starts with the odd number.
Any ideas?
Thanks,
Bill Peters
BAE SYSTEMS

Sure. There were two bugs in the ini file that contains the default TS schemas (I think it was Default_Database_Options.ini or like that...).
Anyway the table description for STEP_NUMERICLIMIT had for it's command line INSERT INTO MEAS_NUMERICLIMIT. I guess TestStand looked at that and said hmm I better create that table too. Then later down the page when you try to create MEAS_NUMERICLIMIT it says the table already exists even though it is empty. The generate SQL button builds a bad file and then the database viewer creates a bad database. I would have to go into MySql and drop the database. I had to save the schema under a custom name, edit it read it back in, generate a new SQL file, but then it would still fail validation because the ini files don't get updated until you exit TestStand. So basically I did this process 3 times before I got it right.
It's wasn't a big deal but it's amazing how a little thing can cause a lot of work.
The second bug, I'm not certain was initially in the file or somehow got set on the fly. There was a random int statement at the very end of the SQL table description for UUT_RESULT. It was also in the schema INI file. Since the int had no name and occurred in a odd place, it created a syntax error in MySql. Same fix as above.
But like I said it's working great now. I like this approach because I serve it to the net with Apache and parse the database with simple PHP scripts.
Thanks,
Bill Peters
BAE SYSTEMS

While installing sap netweaver pi 7.3 error occurred

Hi,
Experts.
Hope all are doing good !!!!!!!!!
Please help me how to solve below mentioned error..... while installing sap nw pi 7.3 error occurred.....
Here is the log file
TRACE      2014-06-23 10:43:31.276 [synxcchapp.cpp:653]
           CSyChildApplicationImpl::doStart() lib=syslib module=syslib
A child process has been started. Pid = 2992. Executable name: D:\usr\sap\SAG\SYS\exe\uc\NTAMD64\brconnect.exe
TRACE      2014-06-23 10:43:31.323 [synxccuren.cpp:577]
           CSyCurrentProcessEnvironmentImpl::setUser() lib=syslib module=syslib
Terminated current impersonation.
INFO       2014-06-23 10:43:31.323
           CJSlibModule::writeInfo_impl()
Output of D:\usr\sap\SAG\SYS\exe\uc\NTAMD64\brconnect.exe -u / -c -f chpass -o SAPSR3 -p XXXXXX is written to the logfile brconnect.log.
TRACE      2014-06-23 10:43:31.978 [synxcpipe.cpp:163]
           CSyStdOutErrPipe::onUnderflow(void * buf, int maxBytes, int timeout)
           lib=syslib module=syslib
Syslib info about system call. OS message 109 (The pipe has been ended.
) after execution of system call 'ReadFile' with parameter ((CSySysLibCallsWrapper::syscallwrapper()->__read__ end of child process output pipe)), line (390) in file (d:\depot\bas\720_rel\bc_720-2_rel\gen\optu\ntamd64\ins\sapinst\impl\src\syslib\synxcpipe.cpp).
WARNING    2014-06-23 10:43:31.978
           CJSlibModule::writeWarning_impl()
Execution of the command "D:\usr\sap\SAG\SYS\exe\uc\NTAMD64\brconnect.exe -u / -c -f chpass -o SAPSR3 -p XXXXXX" finished with return code 5. Output:
BR0801I BRCONNECT 7.20 (35)
BR0280I BRCONNECT time stamp: 2014-06-23 10.43.31
BR0828I Changing password for database user SAPSR3 ...
BR1628E Invalid charcter '@' in database password
BR0832E Changing password for user SAPSR3 failed
BR0280I BRCONNECT time stamp: 2014-06-23 10.43.31
BR0804I BRCONNECT terminated with errors
TRACE      2014-06-23 10:43:31.994
Function setMessageIdOfExceptionMessage: nw.processError
ERROR      2014-06-23 10:43:31.994
           CJSlibModule::writeError_impl()
CJS-30023 Process call 'D:\usr\sap\SAG\SYS\exe\uc\NTAMD64\brconnect.exe -u / -c -f chpass -o SAPSR3 -p XXXXXX' exits with error code 5. For details see log file(s) brconnect.log.
TRACE      2014-06-23 10:43:31.994 [jsextension.hpp:1065]
           CallFunctionBase::call()
Member function 'Installer.invokeModuleCall() has thrown unknown exception. Rethrowing.
ERROR      2014-06-23 10:43:32.181 [sixxcstepexecute.cpp:899]
FCO-00011 The step setOraclePasswords with step key |NW_Doublestack_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|onehost|0|NW_CreateDBandLoad|ind|ind|ind|ind|createdbandload|0|NW_Postload|ind|ind|ind|ind|postload|0|NW_Postload_ORA|ind|ind|ind|ind|ora|0|setOraclePasswords was executed with status ERROR ( Last error reported by the step: Process call 'D:\usr\sap\SAG\SYS\exe\uc\NTAMD64\brconnect.exe -u / -c -f chpass -o SAPSR3 -p XXXXXX' exits with error code 5. For details see log file(s) brconnect.log.).
TRACE      2014-06-23 10:43:32.275 [kdxxctaco.cpp:93]
           CKdbTableContainerImpl::syncToContainerFile lib=iakdblib
CKdbTableContainerImpl::syncToContainerFile start ...
TRACE      2014-06-23 10:43:32.758 [kdxxctaco.cpp:122]
           CKdbTableContainerImpl::syncToContainerFile lib=iakdblib
after creating out stream for C:\Program Files\sapinst_instdir\NW730\ORA\INSTALL\NW730\ORA\STD\AS\statistic.xml
Regards,
sagi.

Hi,
Deepak,
Thank u for quick reply..
here is the brconnect log
BR0801I BRCONNECT 7.20 (35)
BR0280I BRCONNECT time stamp: 2014-06-23 10.48.19
BR0828I Changing password for database user SAPSR3 ...
BR1628E Invalid charcter '@' in database password
BR0832E Changing password for user SAPSR3 failed
BR0280I BRCONNECT time stamp: 2014-06-23 10.48.19
BR0804I BRCONNECT terminated with errors
Regards,
sagi

Error occured during installation SAP Netweaver 2004s ABAP Trial Version

Hi,
during the installation an error occurred.
log.txt:
(Dec 17, 2006 9:47:57 PM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, An error occurred and product installation failed. Look at the log file C:\sapdb\NSP\log.txt for details.
(Dec 17, 2006 9:47:57 PM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, ProductException: (error code = 601; message="An Error happened during call of MaxDB Tool sdbinst. Check end of Logfile C:/DOKUME1/JRGENS1/LOKALE~1/Temp/MaxDBSAPNWPREV.log")
STACK_TRACE: 22
ProductException: (error code = 601; message="An Error happened during call of MaxDB Tool sdbinst. Check end of Logfile C:/DOKUME1/JRGENS1/LOKALE~1/Temp/MaxDBSAPNWPREV.log")
     at com.sap.installshield.maxdb.maxdb_call_sdbinst.install(maxdb_call_sdbinst.java:193)
     at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(Unknown Source)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl.installProduct(Unknown Source)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at com.installshield.wizard.service.LocalImplementorProxy.invoke(Unknown Source)
     at com.installshield.wizard.service.AbstractService.invokeImpl(Unknown Source)
     at com.installshield.product.service.product.GenericProductService.installProduct(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl.installAssembly(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl.access$900(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
     at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
I've run RegCleanTool and rerun the installer, result: the same error.
System specs:
Windows XP SP2
Hardware. AMD Athlon XP 3200+, 2,19 GHz, 1,25 GB Ram
The MS Loopback Adapter is correctly installed and ping on permanent IP adress 10.10.0.10 returns ok.
What's wrong?

Hello,
Try to install the MaxDB software manually, then continue with the installation of SAP Netweaver. Check whether there is any another entry of same SID into NSP? if yes then use any another SID for Netweaver system.
Best Regards,
Sachin

Error in calling META_CALCULATE_TAX

Hi,
I want to assigned the contract no. to SC while assigning I am facing following errors :
E BBP_TAX 008     Error calling META BAPI META_CALCULATE_TAX
E BBP_TAX 013     Not possible to calculate tax
E BBP_TAX 020     Error occurred calling META_BAPI_DISPATCH
Is there any idea for this ?
Thanks,
Sachin

Hi
<u>Which SRM version are you using ?</u>
<b>Please go through the SAP OSS Notes -></b>
Note 1008429 TTE tax calculation: Error calling META_CALCULATE_TAX
Note 997763 Order: Copying hierarchy items returns tax error
Note 1003059 TTE tax calculation: Error on change of ship to address
Note 1038639 BBP_TAX 012 message when you change purchase order
Note 955133 TAX. No TTE tax calculation from SUS (2)
Note 951794 TAX. No TTE tax calculation from SUS
Note 1099552 External tax: Material group not passed to tax system
Note 1085610 SoCo: Error messages in Step 2
Note 976757 Short Dump in Shopping Cart while calculating Tax
Note 870827 NOR3_TAX_CALCULATION is called with incompatable parameters
Note 716071 TTE. Problems w/ tax calculation for U.S.A. using the TTE
Note 666520 TTE: Tax error in the Sourcing Cockpit
Hope this will help. Do let me know.
Regards
- Atul

ERROR: An error occurred while building the default domain - 11g

Hi! I create *.Jspx page, but when I tried to run it then I had an error:
RROR: An error occurred while building the default domain.
And in log file:
wlst > CLASSPATH=C:\Oracle\MIDDLE~1\patch_wls1030\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\MIDDLE~1\patch_cie660\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\MIDDLE~1\jdk160_05\lib\tools.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic_sp.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.jar;C:\Oracle\MIDDLE~1\modules\features\weblogic.server.modules_10.3.0.0.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\webservices.jar;C:\Oracle\MIDDLE~1\modules\ORGAPA~1.5/lib/ant-all.jar;C:\Oracle\MIDDLE~1\modules\NETSFA~1.0_1/lib/ant-contrib.jar;.;C:\Program Files\QuickTime\QTSystem\QTJava.zip;C:\Oracle\MIDDLE~1\WLSERV~1.3\common\eval\pointbase\lib\pbembedded57.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\common\eval\pointbase\lib\pbtools57.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\common\eval\pointbase\lib\pbclient57.jar
wlst > The system cannot find the path specified.
Why the system cannot find the path specified?
Please help! What I need to do?
Best regards!

copy all jars zips or other files from 'program files' to an other folder without spaces in its name.
Then search for the library which refers to the files in 'program files' and change the location to the new folder.
Timo

Error : REP-771: 'afterpform': Fatal PL/SQL error occurred

I have oracle app server 10gr2 on solaris.
when i try to access the reports it shows me the error : REP-771: 'afterpform': Fatal PL/SQL error occurred
Did not get any good information from the logs.
How can I solve the problem or any other logs I can look yet.
Thanks

I'd assume you change varchar2 to clob in db. Reports does not support clob so you need to_char() on the former varchar2 column, which is clob now.

SAP Netweaver 7.01 ABAP Trial Version errors occured during installation

Hi There,
I happened to uninstall NSP and been unsuccesfully to reinstall back. The summary only asked me to look at the log file, which I barely understand what it means.
(Jan 2, 2009 3:44:42 PM), Install, com.installshield.product.actions.Files, err, java.io.IOException: entry install/data/d00ebf4901068d0bec4bdbd254236abd/1.0.0/75e4d976554b19b93110b13459fb1c79/md5/3598e66747f4f71c89a95cce5d5fd7fe does not exist in G:\SAPNW7.01ABAPTrial\image\setup.jar
STACK_TRACE: 30
java.io.IOException: entry install/data/d00ebf4901068d0bec4bdbd254236abd/1.0.0/75e4d976554b19b93110b13459fb1c79/md5/3598e66747f4f71c89a95cce5d5fd7fe does not exist in G:\SAPNW7.01ABAPTrial\image\setup.jar
     at com.installshield.boot.streamhandler.ZipURLConnection.getInputStream(Unknown Source)
     at java.net.URL.openStream(Unknown Source)
     at com.installshield.wizard.service.AbstractWizardServices.getSpannedResource(Unknown Source)
     at com.installshield.wizard.service.AbstractWizardServices.getSpannedResource(Unknown Source)
     at com.installshield.wizard.service.AbstractWizardServices.getIndexedResource(Unknown Source)
     at com.installshield.product.ProductAction.getIndexedResource(Unknown Source)
     at com.installshield.product.actions.Files.getResourceInputStream(Unknown Source)
     at com.installshield.product.actions.Files.copyFilesPayload(Unknown Source)
     at com.installshield.product.actions.Files.install(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(Unknown Source)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl.installProduct(Unknown Source)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at com.installshield.wizard.service.LocalImplementorProxy.invoke(Unknown Source)
     at com.installshield.wizard.service.AbstractService.invokeImpl(Unknown Source)
     at com.installshield.product.service.product.GenericProductService.installProduct(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl.installAssembly(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl.access$900(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
     at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
(Jan 2, 2009 3:51:13 PM), Install, com.installshield.product.actions.CopyFile, err, An error occurred and product installation failed. Look at the log file D:\sapdb\NSP\log.txt for details.
(Jan 2, 2009 3:51:13 PM), Install, com.installshield.product.actions.CopyFile, err, ProductException: (error code = 601; message="err"; additional data = [Can not copy file with FileService : ServiceException: (error code = -30017; message = "The system cannot find the file specified.
(2)"; severity = 0)])
STACK_TRACE: 23
ProductException: (error code = 601; message="err"; additional data = [Can not copy file with FileService : ServiceException: (error code = -30017; message = "The system cannot find the file specified.
(2)"; severity = 0)])
     at com.installshield.product.actions.CopyFile.install(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(Unknown Source)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl.installProduct(Unknown Source)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at com.installshield.wizard.service.LocalImplementorProxy.invoke(Unknown Source)
     at com.installshield.wizard.service.AbstractService.invokeImpl(Unknown Source)
     at com.installshield.product.service.product.GenericProductService.installProduct(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl.installAssembly(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl.access$900(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
     at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Could you kindly advise me how to solve this problem please?
Thanks and Regards

hello,
I got the following error.While unwrapping the error -the zipped file datasave.gz is corrupt appeared.The load folder is empty. What shall I do know.Plz tell me as soon as possible.
(Jan 11, 2009 2:00:37 AM), Install, com.installshield.product.actions.CopyFile, err, An error occurred and product installation failed. Look at the log file C:\sapdb\NSP\log.txt for details.
(Jan 11, 2009 2:00:37 AM), Install, com.installshield.product.actions.CopyFile, err, ProductException: (error code = 601; message="err"; additional data = [C:\EDU\SAP NW\SAPNW7.01ABAPTrial\SAPNW7.01ABAPTrial\image\load\load_datasave.gz does not exist])
STACK_TRACE: 22
ProductException: (error code = 601; message="err"; additional data = [C:\EDU\SAP NW\SAPNW7.01ABAPTrial\SAPNW7.01ABAPTrial\image\load\load_datasave.gz does not exist])
     at com.installshield.product.actions.CopyFile.install(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(Unknown Source)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl.installProduct(Unknown Source)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at com.installshield.wizard.service.LocalImplementorProxy.invoke(Unknown Source)
     at com.installshield.wizard.service.AbstractService.invokeImpl(Unknown Source)
     at com.installshield.product.service.product.GenericProductService.installProduct(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl.installAssembly(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl.access$900(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
     at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Regards,
Akash Nagar
Edited by: Akash Nagar on Jan 10, 2009 10:50 PM

Error occurred in deployment step 'Install app for SharePoint': Failed to install app for SharePoint. provider-hosted app sharepoint on premise

Error occurred in deployment step 'Install app for SharePoint, ULS log as below:
0x0BA8 SharePoint Foundation         App Deployment                acjjg Medium The current user has System.Threading.Thread.CurrentPrincipal.Identity.Name
= 0#.w|perf\abraham.lincoln, System.Security.Principal.WindowsIdentity.GetCurrent().Name = NT AUTHORITY\IUSR, System.Web.HttpContext.Current.User.Identity.Name = 0#.w|perf\abraham.lincoln. dcf1d59c-94c5-5071-47bf-07cd3f2ead95
12/14/2014 23:54:27.39 w3wp.exe (0x2170)                       0x0BA8 SharePoint Foundation
App Deployment                ag8d6 Medium SPApp: CreateAppUsingPackageMetadata: isCabStream is false. Treating the stream as a ZIP. dcf1d59c-94c5-5071-47bf-07cd3f2ead95
12/14/2014 23:54:27.39 w3wp.exe (0x2170)                       0x0BA8 SharePoint Foundation
App Deployment                ahkn9 High    Deleting App with fingerprint TJQrYuD5N+kEe38LZtl6wSs3Ak3yYvWcmwuNLTqtpdFzb4qSMopN3SWCRdWvntrKoM7qIS2S2llpA5omi8iHqQ==
on site 264dc389-d394-4985-a43c-ad91a383c0df dcf1d59c-94c5-5071-47bf-07cd3f2ead95
12/14/2014 23:54:27.39 w3wp.exe (0x2170)                       0x0BA8 SharePoint Foundation
App Deployment                ahkob High    The App with fingerprint TJQrYuD5N+kEe38LZtl6wSs3Ak3yYvWcmwuNLTqtpdFzb4qSMopN3SWCRdWvntrKoM7qIS2S2llpA5omi8iHqQ==
on site 264dc389-d394-4985-a43c-ad91a383c0df was to be deleted, but it did not exist dcf1d59c-94c5-5071-47bf-07cd3f2ead95
12/14/2014 23:54:27.41 w3wp.exe (0x2170)                       0x0BA8 SharePoint Foundation
App Deployment                abnqa Medium App Packaging: CreatePackage: There are 10 parts in the package. There are 1 package-part relationships
in the package. dcf1d59c-94c5-5071-47bf-07cd3f2ead95
12/14/2014 23:54:27.41 w3wp.exe (0x2170)                       0x0BA8 SharePoint Foundation
App Deployment                afyz6 Medium SPAppResources: ParseResources: No default resource file was found. dcf1d59c-94c5-5071-47bf-07cd3f2ead95
12/14/2014 23:54:27.41 w3wp.exe (0x2170)                       0x0BA8 SharePoint Foundation
App Deployment                afyzx Medium SPAppResources: ParseResources: no resource file relationships were found. dcf1d59c-94c5-5071-47bf-07cd3f2ead95
12/14/2014 23:54:27.41 w3wp.exe (0x2170)                       0x0BA8 SharePoint Foundation
App Deployment                aebgs Medium SPPackageUtility: ExtractPart: Creating directory 'C:\Users\abraham.lincoln.PERF\AppData\Local\Temp\71345ca6-3565-43d8-9017-2d3336965d8f\extract' dcf1d59c-94c5-5071-47bf-07cd3f2ead95
12/14/2014 23:54:27.41 w3wp.exe (0x2170)                       0x0BA8 SharePoint Foundation
App Deployment                aebgt Medium SPPackageUtility: ExtractPart: Creating file 'C:\Users\abraham.lincoln.PERF\AppData\Local\Temp\71345ca6-3565-43d8-9017-2d3336965d8f\extract\AppManifest.xml' dcf1d59c-94c5-5071-47bf-07cd3f2ead95
12/14/2014 23:54:27.41 w3wp.exe (0x2170)                       0x0BA8 SharePoint Foundation
App Deployment                ajddw Medium SPPackageUtility: ExtractPart: Part stream length is '1072'. dcf1d59c-94c5-5071-47bf-07cd3f2ead95
12/14/2014 23:54:27.41 w3wp.exe (0x2170)                       0x0BA8 SharePoint Foundation
App Deployment                ajddz Medium SPPackageUtility: ExtractPart: Length is '1072', not locking before copying the stream. dcf1d59c-94c5-5071-47bf-07cd3f2ead95
12/14/2014 23:54:27.41 w3wp.exe (0x2170)                       0x0BA8 SharePoint Foundation
App Deployment                aebgt Medium SPPackageUtility: ExtractPart: Creating file 'C:\Users\abraham.lincoln.PERF\AppData\Local\Temp\71345ca6-3565-43d8-9017-2d3336965d8f\extract\AppIcon.png' dcf1d59c-94c5-5071-47bf-07cd3f2ead95
12/14/2014 23:54:27.41 w3wp.exe (0x2170)                       0x0BA8 SharePoint Foundation
App Deployment                ajddw Medium SPPackageUtility: ExtractPart: Part stream length is '3540'. dcf1d59c-94c5-5071-47bf-07cd3f2ead95
12/14/2014 23:54:27.41 w3wp.exe (0x2170)                       0x0BA8 SharePoint Foundation
App Deployment                ajddz Medium SPPackageUtility: ExtractPart: Length is '3540', not locking before copying the stream. dcf1d59c-94c5-5071-47bf-07cd3f2ead95
12/14/2014 23:54:27.41 w3wp.exe (0x2170)                       0x0BA8 SharePoint Foundation
App Deployment                aidi7 Medium SPIconAppPartValidator: IsSupportedFormat: image raw format is 'b96b3caf-0728-11d3-9d7b-0000f81ef32e'. dcf1d59c-94c5-5071-47bf-07cd3f2ead95
12/14/2014 23:54:27.42 w3wp.exe (0x2170)                       0x0BA8 SharePoint Foundation
App Deployment                afyz6 Medium SPAppResources: ParseResources: No default resource file was found. dcf1d59c-94c5-5071-47bf-07cd3f2ead95
12/14/2014 23:54:27.42 w3wp.exe (0x2170)                       0x0BA8 SharePoint Foundation
App Deployment                afyzx Medium SPAppResources: ParseResources: no resource file relationships were found. dcf1d59c-94c5-5071-47bf-07cd3f2ead95
12/14/2014 23:54:27.42 w3wp.exe (0x2170)                       0x0BA8 SharePoint Foundation
App Deployment                aebgt Medium SPPackageUtility: ExtractPart: Creating file 'C:\Users\abraham.lincoln.PERF\AppData\Local\Temp\71345ca6-3565-43d8-9017-2d3336965d8f\extract\featurecc1deab7-efdf-4cc2-80ae-60e073577d64.xml' dcf1d59c-94c5-5071-47bf-07cd3f2ead95
12/14/2014 23:54:27.42 w3wp.exe (0x2170)                       0x0BA8 SharePoint Foundation
App Deployment                ajddw Medium SPPackageUtility: ExtractPart: Part stream length is '321'. dcf1d59c-94c5-5071-47bf-07cd3f2ead95
12/14/2014 23:54:27.42 w3wp.exe (0x2170)                       0x0BA8 SharePoint Foundation
App Deployment                ajddz Medium SPPackageUtility: ExtractPart: Length is '321', not locking before copying the stream. dcf1d59c-94c5-5071-47bf-07cd3f2ead95
12/14/2014 23:54:27.42 w3wp.exe (0x2170)                       0x0BA8 SharePoint Foundation
App Deployment                aebgt Medium SPPackageUtility: ExtractPart: Creating file 'C:\Users\abraham.lincoln.PERF\AppData\Local\Temp\71345ca6-3565-43d8-9017-2d3336965d8f\extract\elements4d87f314-4b0a-4b89-8a7e-9cb73c99f25f.xml' dcf1d59c-94c5-5071-47bf-07cd3f2ead95
12/14/2014 23:54:27.42 w3wp.exe (0x2170)                       0x0BA8 SharePoint Foundation
App Deployment                ajddw Medium SPPackageUtility: ExtractPart: Part stream length is '849'. dcf1d59c-94c5-5071-47bf-07cd3f2ead95
12/14/2014 23:54:27.42 w3wp.exe (0x2170)                       0x0BA8 SharePoint Foundation
App Deployment                ajddz Medium SPPackageUtility: ExtractPart: Length is '849', not locking before copying the stream. dcf1d59c-94c5-5071-47bf-07cd3f2ead95
12/14/2014 23:54:27.42 w3wp.exe (0x2170)                       0x0BA8 SharePoint Foundation
App Deployment                aerhy Medium App Packaging - List of App Parts (count ='2'): Name='SPIconAppPart',Name='SPFeatureAppPart', dcf1d59c-94c5-5071-47bf-07cd3f2ead95
12/14/2014 23:54:27.42 w3wp.exe (0x2170)                       0x0BA8 SharePoint Foundation
App Deployment                aerhz Medium App Packaging - List of Deployment Groups (count ='3'): Name='SPIconDeploymentGroup',Name='SPTargetWebDeploymentGroup',Name='SPQuickLaunchDeploymentGroup', dcf1d59c-94c5-5071-47bf-07cd3f2ead95
12/14/2014 23:54:27.42 w3wp.exe (0x2170)                       0x0BA8 SharePoint Foundation
App Deployment                mq71 Medium Creating App with fingerprint TJQrYuD5N+kEe38LZtl6wSs3Ak3yYvWcmwuNLTqtpdFzb4qSMopN3SWCRdWvntrKoM7qIS2S2llpA5omi8iHqQ==
to site 264dc389-d394-4985-a43c-ad91a383c0df. dcf1d59c-94c5-5071-47bf-07cd3f2ead95
12/14/2014 23:54:27.44 w3wp.exe (0x2170)                       0x0BA8 SharePoint Foundation
App Deployment                afpd2 Medium Committing package with fingerprint TJQrYuD5N+kEe38LZtl6wSs3Ak3yYvWcmwuNLTqtpdFzb4qSMopN3SWCRdWvntrKoM7qIS2S2llpA5omi8iHqQ==
and data length 8010 to site 264dc389-d394-4985-a43c-ad91a383c0df. dcf1d59c-94c5-5071-47bf-07cd3f2ead95
12/14/2014 23:54:27.46 w3wp.exe (0x2170)                       0x0BA8 SharePoint Foundation
App Deployment                ajk9e Medium Writing 8010 bytes to database for app with fingerprint TJQrYuD5N+kEe38LZtl6wSs3Ak3yYvWcmwuNLTqtpdFzb4qSMopN3SWCRdWvntrKoM7qIS2S2llpA5omi8iHqQ== dcf1d59c-94c5-5071-47bf-07cd3f2ead95
12/14/2014 23:54:27.50 w3wp.exe (0x2170)

Hi Jerry,
I agree with Nikhil, I think you have posted partial ULS log, we could not find effective errors for the issue.
For Provider Hosted app in SharePoint server on-premise,
the TokenHelper class will try to access your Azure Security Principle by default.
Did you have a valid Azure account?
If not, the issue may be caused that you don't have a valid account, to resolve this issue, you can use
a valid Azure account or not going to use Azure Platform for hosting the app as the article
below.
http://pratapreddypilaka.blogspot.jp/2012/12/sharepoint-2013-avoiding-azure-on-dev.html
Thanks,
Jason
Jason Guo
TechNet Community Support

An error occurred calling 'LogMultipleResults' in 'ITSDBLog' of 'zNI TestStand Database Logging'

Similar Messages

Maybe you are looking for