An error occurred while connecting to the AirPlay device "AirTunes AirPort Express". An unknown error occurred (-15000)
??? After upgrading to Lion.
I'm getting the same exact error trying to play music wirelessly to my AppleTV (1st gen) from my desktop. However, I'm not on Lion yet but still running 10.6.8.
AppleTV v3.0.2
Airport Extreme Base Station v7.6
iTunes 10.5.1
My firewall in mac system prefs is OFF and I still get the same error.
Help... anyone?
thanks
Similar Messages
-
When attempting to play iTunes 11.1.2 music wirelessly from my Mac Mini to stereo speakers connected to an AE "G" I get the following message: An error occurred while connecting to the AirPlay device “Stereo Airport Express G”. However, when I attempt to play internet radio from an iPod Touch wirelessly to the same speakers connected to the same AE "G", it works fine.
Finally, when I swap out the "G" for an AE "N" connected to the same speakers Airplay works fine, both from the Mini and the iPod.
Why would the iPod connection work while the Mini connection not?I have what sounds like a very similar issue.
I had my Denon 3312ci working perfectly with Airplay from my 2013 iMac running iTunes. Upgraded to iTunes 11.1.3, and now when I attempt to Airplay direct from iTunes to the 3312, it plays for about half a second and then stops. Displayed on the Amp then says "Assigning Network". The amp starts dropping ping packets at this point. About 15-20 seconds later the pings start coming back, but no Airplay.
I tried different network cables, resetting the microprocessor, a different switch, changing between DHCP and static IP. Was about to make a warranty call to Denon, when I thought maybe I should try Airplaying directly from iphone and ipad. Much to my surprise, it worked from those devices.
I prefer to use my iMac to Airplay rather than ipad/iphone as I found I got next to no audio drop outs using it that way (they are both using wired network), where as ipad/iphone occasionally would get a moment of silence in the middle of a song.
My network set up is fine. I can use internet radio and connect to DLNA services fine on the amp. It is just airplay between iTunes 11.1.3 and the amp where the issue lies.
No fixes as yet, but I have logged a support call with Denon Australia to see what they say. -
Hi ,
I acquired an Apple TV (Gen3) a couple of days ago.
The Apple TV seems to be connected properly to WIFI (Good signal)
I watched streaming videos on Youtube and film trailers – the speed is ok.
I followed the protocol but, still, I cannot connect Itunes to the Apple tv.
These are the error messages:
On the TV : apple tv could not connect to library
In Itunes: An error occurred while connecting to the AirPlay device “Apple TV”. An unknown error occurred (-15000).
Please note that Apple TV doesn’t appear in the list of devices in Itune’s preferences menu.
The Home Share is enabled on both devices and I connected with the Same Apple ID on each device.
Airplay is on.
Ref Apple TV :
Apple tv: Model MD199HC/A
Serial number DY******RHN
apple tv software : 5.3(6105)
Imac: OS X version 10.8.4
I already tried to :
Unplug/plug modem and router
Test connectivity
Disable the Firewall
Re-enable the firewall with Itunes in the list of ‘allowed’ devices
Re-set Apple TV (3 times) + Up to date
Re-start Apple TV and computer several time
Itunes is up to date
Could you please help?
Many Thanks
Sylvie
<Edited By Host>Hi all,
Thanks for your comments.
In my knowledge, there isn't any security software active on my computer.
After re-setting my routeur several times, I finally swapped it against an Airport Time Capsule.
It solved the problem, however, I would be interested to know if a (less expensive) solution exists.
Sylvie -
What does this mean and what can I do to fix it. An error occurred while connecting to the AirPlay device “master bedroom”. An unknown error occurred (-15000).
Troubleshooting AirPlay and AirPlay Mirroring
-
an error occurred while connecting to the airplay device "apple tv". An unknown error occured (15007).
need helpHi all,
Thanks for your comments.
In my knowledge, there isn't any security software active on my computer.
After re-setting my routeur several times, I finally swapped it against an Airport Time Capsule.
It solved the problem, however, I would be interested to know if a (less expensive) solution exists.
Sylvie -
An unknown error (-15006) occurred while connecting to the AirPlay device "Frontera Speakers".
I have seen several threads that address problems connecting an Airport Express to an existing network. However, I have had no luck with any of the suggestions. I have configured at Airport Express base station as an AirPlay device. The unit shows up as connected in Airport Utility 5.6 and can be selected through iTunes. After several moments of displaying a dialog box indicating a connection to remote speakers the following error is displayed in the finder: An unknown error (-15006) occurred while connecting to the AirPlay device "Speakers" Airport Utility lauches automatically and displays the following error: Make sure your Apple Wi-Fi base station is plugged in and in range of your computer or connected via Ethernet and try again. (-6753)
I have rebuilt permissions and reset the airport multiple times. At a loss.
MacBook Pro early 2012 running 10.7.4
Airport Express Model A1084
Any help would be appreciated.It may be possible the where you have the AX located may just be in a spot where it does not get a good signal even it is only 8 feet away.
I suggest that you download and install iStumbler. You will use it to determine the signal quality by making Signal-to-Noise Ratio (SNR) measurements. This will be easiest if your Mac is a laptop ... or you can borrow one. When taking the measurements, you only want your "main" AirPort running as this is what we want to measure at the location of the AX.
SNR (in dB) = Signal (in dBm) - Noise (in dBm)
You can easily find the Signal and Noise value using System Profiler on your Mac laptop.
ref: Click on the Apple icon on the menu bar > About This Mac > More Info... > Contents > Network > AirPort > Interfaces > en1 > Current Network Information > Find your wireless network > Signal / Noise
While your still in the System Profiler, note the value for Transmit Rate.
These values should be negative numbers. For example, mine currently read: -67 dBm / -95 dBm, with a transmit rate of 27 (Mbps). Plugging in these numbers yield: SNR = -67 - (-95) = 28. My Mac Mini is about four rooms away from my AEBS with about five walls between them. As you can see, the signal is still quite useable ... but the bandwidth is minimal, especially for streaming.
SNR Guideline
40dB+ SNR = Excellent signal
25dB to 40dB SNR = Very good signal
15dB to 25dB SNR = Low signal
10dB to 15dB SNR = Very low signal
5dB to 10dB SNR = No signal
Please post back your results. -
Installed latest version of iTunes, now I cannot play music through my Airport Express. I'm seeing the message "An error occurred while connecting to the AirPlay device "living room". The network connection failed..."Living room" is what I named the is what I named The AirPlay function of the Aport Express. Thanks!
I have the same problem - did you solve it?
-
This error message keeps popping up overtime I try to play an iTunes bought tv show from my mac book pro to my apple tv "An error occurred while connecting to the AirPlay device “Living Room Apple TV”. An unknown error occurred (406)."
Does anyone know what this means and how to fix it. Both devices are registered on the same apple id and password. This problem just started happening within the last week or so but prior to that everything was working as it should have. In fact since the launch of icloud things have been glitchy for me with purchasing and playing off the apple tv as well.
Can someone please help?'
ThanksUnfortunately Apple's error codes are very much a mystery (at least to me), try restarting the Apple TV, iPad and router. If that doesn't help look into whether you might be encountering interference on your network.
Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
Refer to your router manual for instructions on changing your wifi channel. -
Please help. I have been having major difficulties with my Airport Express. It used to work fine but for the last year or so it continually disconnects, skips and ultimately drops out and itunes gives me this message "An unknown error (-15006) occurred while connecting to the AirPlay device “AirPort Express”. I keep resetting, unplugging, restarting Itunes, or my computer. It works for a couple of hours and then I get the message again. It's making me nuts and was a bummer at last week's party when we had no music, yet again. I have looked up the support discussions, but there is no answer as to how I can fix it. I am currently using Mt Lion OS. Does this have anything to do with it? Checked for software updates, but nada.
Any suggestions.It may be possible the where you have the AX located may just be in a spot where it does not get a good signal even it is only 8 feet away.
I suggest that you download and install iStumbler. You will use it to determine the signal quality by making Signal-to-Noise Ratio (SNR) measurements. This will be easiest if your Mac is a laptop ... or you can borrow one. When taking the measurements, you only want your "main" AirPort running as this is what we want to measure at the location of the AX.
SNR (in dB) = Signal (in dBm) - Noise (in dBm)
You can easily find the Signal and Noise value using System Profiler on your Mac laptop.
ref: Click on the Apple icon on the menu bar > About This Mac > More Info... > Contents > Network > AirPort > Interfaces > en1 > Current Network Information > Find your wireless network > Signal / Noise
While your still in the System Profiler, note the value for Transmit Rate.
These values should be negative numbers. For example, mine currently read: -67 dBm / -95 dBm, with a transmit rate of 27 (Mbps). Plugging in these numbers yield: SNR = -67 - (-95) = 28. My Mac Mini is about four rooms away from my AEBS with about five walls between them. As you can see, the signal is still quite useable ... but the bandwidth is minimal, especially for streaming.
SNR Guideline
40dB+ SNR = Excellent signal
25dB to 40dB SNR = Very good signal
15dB to 25dB SNR = Low signal
10dB to 15dB SNR = Very low signal
5dB to 10dB SNR = No signal
Please post back your results. -
When trying to play itunes from my PC to my stereo connected to an Airport Express, I gen an error that says "An error occured while connecting to the Airplay device "Stereo" an unknown error occured (-15000)". This has happened before and for reasons unknown to me, the problem corrects itself, then it starts again/ Makes me wish I did not have my music on itunes.
moehadi, Welcome to the discussion area!
This is typically caused by a firewall or Internet security software running on your PC. Please read the comments in "Error -3256 or -15000 when streaming to AirPort Express base stations using iTunes".
Also there is "iTunes 8: Unknown error -15000 when attempting to stream music to devices connected to AirPort Express with AirTunes". -
An unknown error (-15006) occurred while connecting to the AirPlay device to my AirPort Express”. Does anyone know how to solve?
It may be possible the where you have the AX located may just be in a spot where it does not get a good signal even it is only 8 feet away.
I suggest that you download and install iStumbler. You will use it to determine the signal quality by making Signal-to-Noise Ratio (SNR) measurements. This will be easiest if your Mac is a laptop ... or you can borrow one. When taking the measurements, you only want your "main" AirPort running as this is what we want to measure at the location of the AX.
SNR (in dB) = Signal (in dBm) - Noise (in dBm)
You can easily find the Signal and Noise value using System Profiler on your Mac laptop.
ref: Click on the Apple icon on the menu bar > About This Mac > More Info... > Contents > Network > AirPort > Interfaces > en1 > Current Network Information > Find your wireless network > Signal / Noise
While your still in the System Profiler, note the value for Transmit Rate.
These values should be negative numbers. For example, mine currently read: -67 dBm / -95 dBm, with a transmit rate of 27 (Mbps). Plugging in these numbers yield: SNR = -67 - (-95) = 28. My Mac Mini is about four rooms away from my AEBS with about five walls between them. As you can see, the signal is still quite useable ... but the bandwidth is minimal, especially for streaming.
SNR Guideline
40dB+ SNR = Excellent signal
25dB to 40dB SNR = Very good signal
15dB to 25dB SNR = Low signal
10dB to 15dB SNR = Very low signal
5dB to 10dB SNR = No signal
Please post back your results. -
HT1595 An error occurred (-6722) while connecting to the AirPlay device "Apple TV"
An error occurred (-6722) while connecting to the AirPlay device “Apple TV”
I was trying to connect my macbook air to my apple tv when getting this error. It turned out to be the firewall on the macbook air blocking airplay. Try turning off the firewall to see if it works for you.
-
An unknown error (-15006) occurred while connecting to the AirPlay device "Apple TV".
LOADS OF PROBLEMS WITH AIPORT EXPRESS
An unknown error (-15006) occurred while connecting to the AirPlay device “Apple TV”.I had the same issue, started getting the error after my Airport Express had been working perfectly for over two years.
On another post in this site, someone advised disabling IPv6.
System Preferences -> Network -> Advanced -> TCP/IP -> Configure IPv6 to OFF
This instantly fixed the streaming for me. Not sure why or if it will work for AppleTV.
Hope this helps. -
Since updating to Yosemite my airport express (used for airplay) connects for a short period then drops, the error message "An error occurred while connecting to the AirPlay device “Kitchen”. The host cannot be reached." Has anyone else had this problem
I'm having the same issue. Haven't found a workaround. I use a main TimeCapsule as my main router, also have another TimeCapsule that extends the network, three Airport Express and an AppleTV. For whatever reason, the two AirportExpress that I have in a different rooms cut out. I only have 600 square foot apartment so it's not that big, the signal should be strong enough. Airport Utilitiy reports the signal strength to be strong on all devices.
I'm using all new equipment, a new MacPro for my music, new TimeCapsules, new Airport Express, new everything with the latest Yosemite software. Very frustrating. My Airplay used to work very nice and now I'm constantly having issues and restarting my network. I did a fresh install of all my software on my MacPro when I got it in January so it's not as if it's an old machine with old software, everything is new within the last 6 months.
The only workaround I found so far is to unplug the devices and to plug them back in. Since upgrading to Yosemite, I'm restarting my Airport Express at least twice a week. Very annoying. -
An unknown error (-15006) occurred while connecting to the AirPlay device "Living Room Apple TV".
Hi All, need some advice here, this occurs in iTunes these days never had this prob before Using iTunes Airplay or AppleTv.. It's irritating Me!An unknown
,, error (-15006) occurred while connecting to the AirPlay device “Living Room Apple TV”.''''
Thanks for possible solutions
BossJoop Imac + 2012, 3e gen Apple tv + all latest software and updatesWelcome to the Apple Community.
Try the following steps, check whether things are working after each step where appropriate, before trying the next.
Check AirPlay is turned on on the Apple TV (turn it off and on if it already is)
Check that both devices are on the same network (Settings > Wifi, on the mobile device and Settings > General > Network, on the Apple TV).
Restart the Apple TV (Settings > General > Restart).
Restart the Apple TV by removing ALL the cables for 30 seconds.
Restart your router.
Restart your computer.
Maybe you are looking for
-
Why can't i access the app store on my iphone 5
Please why can't I access the app store on my iPhone 5....it keep saying can't access.. I'm from Nigeria
-
Does the desktop on the display match the desktop on the portable exactly?
I just want to check before I go ahead and order the display and the new MBA whether the desktops of the two will match perfectly. The reason I am asking this is that I have been googling images of the display and in most of the pictures the display'
-
Lightroom Mobile and Raw files in Camera Roll
I made a new collection in Lightroom Mobile. I tried to add some files from my camera roll. The raw files in my camera roll do not show up when I click on the Add from Camera Roll button. Is working with raw files in the camera roll not an option
-
Today early in the morning i found an error in system logs which is shown below: Log Name: Application Source: Microsoft-Windows-Winlogon Date: 6/2/2014 3:29:22 PM Event ID: 4103 Task Category: None Level: Error Keyw
-
Previous month sales against each date
Hi all, I am working on Bo XI 3.0. I have a requirement where i need to display in table -"Date" then "sales" and against that in the same table "previous month's sales" For e.x date sales previous month's sales 01/04/08