An error occurred while parsing a contents stream. Unable to analyze the PDF file

I get this error while attempting to use Preflight to analyze a PDF provided by an outside source. How can I validate the streams within the PDF? I'm on a team of developers who can build a tool given the relevant components, but we don't know where to start.

Are you sure that file paths are correct? I say this because under XP they would have originally pointed to Documents & Settings/My Pictures whereas on W7 it will be User/Pictures, albeit you are using an external hd.
Take a look at this knowledge base note on the correct procedure for back-up and restore.
I think writing metadata to files for such a large catalog will be a thankless task.
http://helpx.adobe.com/photoshop-elements/kb/backup-restore-move-catalog-photoshop.html

Similar Messages

An error occurred while parsing DA Hierarchy : Document is invalid: no gram

When logging in to Portal Administration, I am seeing the following error. Please help me resolve this problem. Many thanks.
An exception has been thrown while trying to render this page.
Exception Message:
An error occurred while parsing DA Hierarchy : Document is invalid: no grammar found.
---Begin Stack Trace---
com.bea.p13n.delegation.common.DelegationSystemException: An error occurred while parsing DA Hierarchy : Document is invalid: no grammar found. at com.bea.p13n.delegation.management.internal.DelegationHierarchyAbstractPersistenceManager.parseData(DelegationHierarchyAbstractPersistenceManager.java:209) at com.bea.p13n.delegation.management.internal.DelegationHierarchyAbstractPersistenceManager.get(DelegationHierarchyAbstractPersistenceManager.java:189) at com.bea.p13n.delegation.management.internal.DelegationHierarchyDelegate.getHierarchyRoot(DelegationHierarchyDelegate.java:123) at com.bea.p13n.delegation.management.DelegationRoleManager.getHierarchyRoot(DelegationRoleManager.java:63) at com.bea.jsptools.delegation.Pruner.isRootDARole(Pruner.java:145) at com.bea.jsptools.delegation.PortalNodePruner.isEnabled(PortalNodePruner.java:96) at com.bea.treeutils.PrunableTreeNode.checkEnabled(PrunableTreeNode.java:161) at com.bea.jsptools.portal.PortalHierarchyServlet.generateLibraryNodes(PortalHierarchyServlet.java:856) at com.bea.jsptools.portal.PortalHierarchyServlet.generateTopLevelNodes(PortalHierarchyServlet.java:231) at com.bea.jsptools.portal.PortalHierarchyServlet.generateTree(PortalHierarchyServlet.java:104) at jsp_servlet._portaltools.__portalmgmttree._jspService(__portalmgmttree.java:5784) at weblogic.servlet.jsp.JspBase.service(JspBase.java:33) at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:1072) at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:465) at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:28) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27) at com.bea.p13n.servlets.PortalServletFilter.doFilter(PortalServletFilter.java:293) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27) at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:644) at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:423) at com.bea.netuix.servlets.controls.content.JspContent.beginRender(JspContent.java:533) at com.bea.netuix.nf.ControlLifecycle$1.visit(ControlLifecycle.java:495) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:542) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:553) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:553) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:553) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:553) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:553) at com.bea.netuix.nf.ControlTreeWalker.walk(ControlTreeWalker.java:247) at com.bea.netuix.nf.ControlTreeWalker.walk(ControlTreeWalker.java:105) at com.bea.netuix.nf.Lifecycle.run(Lifecycle.java:356) at com.bea.netuix.nf.UIControl.render(UIControl.java:536) at com.bea.netuix.servlets.controls.PresentationContext.render(PresentationContext.java:405) at com.bea.netuix.servlets.util.RenderToolkit.renderChild(RenderToolkit.java:123) at com.bea.netuix.servlets.jsp.taglib.RenderChild.doStartTag(RenderChild.java:58) at jsp_servlet._framework._skeletons._beatools.__gridlayout_two_column._jspService(__gridlayout_two_column.java:423) at weblogic.servlet.jsp.JspBase.service(JspBase.java:33) at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:1072) at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:465) at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:348) at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:638) at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:423) at com.bea.netuix.servlets.controls.JspRenderer.renderAlt(JspRenderer.java:194) at com.bea.netuix.servlets.controls.JspRenderer.beginRender(JspRenderer.java:96) at com.bea.netuix.nf.ControlLifecycle$1.visit(ControlLifecycle.java:491) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:542) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:553) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:553) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:553) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:553) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:553) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:553) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:553) at com.bea.netuix.nf.ControlTreeWalker.walk(ControlTreeWalker.java:247) at com.bea.netuix.nf.ControlTreeWalker.walk(ControlTreeWalker.java:105) at com.bea.netuix.nf.Lifecycle.run(Lifecycle.java:356) at com.bea.netuix.nf.UIControl.render(UIControl.java:536) at com.bea.netuix.servlets.controls.PresentationContext.render(PresentationContext.java:405) at com.bea.netuix.servlets.util.RenderToolkit.renderChild(RenderToolkit.java:123) at com.bea.netuix.servlets.jsp.taglib.RenderChild.doStartTag(RenderChild.java:58) at jsp_servlet._framework._skeletons._beatools.__gridlayout._jspService(__gridlayout.java:193) at weblogic.servlet.jsp.JspBase.service(JspBase.java:33) at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:1072) at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:465) at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:348) at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:638) at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:423) at com.bea.netuix.servlets.controls.JspRenderer.renderAlt(JspRenderer.java:194) at com.bea.netuix.servlets.controls.JspRenderer.beginRender(JspRenderer.java:96) at com.bea.netuix.nf.ControlLifecycle$1.visit(ControlLifecycle.java:491) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:542) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:553) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:553) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:553) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:553) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:553) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:553) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:553) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:553) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:553) at com.bea.netuix.nf.ControlTreeWalker.walk(ControlTreeWalker.java:247) at com.bea.netuix.nf.ControlTreeWalker.walk(ControlTreeWalker.java:105) at com.bea.netuix.nf.Lifecycle.run(Lifecycle.java:356) at com.bea.netuix.nf.UIControl.render(UIControl.java:536) at com.bea.netuix.servlets.controls.PresentationContext.render(PresentationContext.java:405) at com.bea.netuix.servlets.util.RenderToolkit.renderChild(RenderToolkit.java:123) at com.bea.netuix.servlets.jsp.taglib.RenderChild.doStartTag(RenderChild.java:58) at jsp_servlet._framework._skeletons._beatools.__gridlayout_outermost._jspService(__gridlayout_outermost.java:285) at weblogic.servlet.jsp.JspBase.service(JspBase.java:33) at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:1072) at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:465) at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:348) at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:638) at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:423) at com.bea.netuix.servlets.controls.JspRenderer.renderAlt(JspRenderer.java:194) at com.bea.netuix.servlets.controls.JspRenderer.beginRender(JspRenderer.java:96) at com.bea.netuix.nf.ControlLifecycle$1.visit(ControlLifecycle.java:491) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:542) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:553) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:553) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:553) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:553) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:553) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:553) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:553) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:553) at com.bea.netuix.nf.ControlTreeWalker.walk(ControlTreeWalker.java:247) at com.bea.netuix.nf.Lifecycle.runOutbound(Lifecycle.java:204) at com.bea.netuix.nf.Lifecycle.run(Lifecycle.java:153) at com.bea.netuix.servlets.manager.UIServlet.runLifecycle(UIServlet.java:333) at com.bea.netuix.servlets.manager.UIServlet.doPost(UIServlet.java:196) at com.bea.netuix.servlets.manager.PortalServlet.doPost(PortalServlet.java:772) at com.bea.netuix.servlets.manager.PortalServlet.doGet(PortalServlet.java:671) at com.bea.netuix.servlets.manager.UIServlet.service(UIServlet.java:147) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:1072) at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:465) at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:28) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27) at com.bea.servlet.PortalSystemAdministratorFilter.doFilter(PortalSystemAdministratorFilter.java:83) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27) at com.bea.p13n.servlets.PortalServletFilter.doFilter(PortalServletFilter.java:293) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27) at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:6987) at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321) at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121) at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3892) at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2766) at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:224) at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:183) Caused by: org.xml.sax.SAXParseException: Document is invalid: no grammar found. at org.apache.xerces.parsers.DOMParser.parse(Unknown Source) at org.apache.xerces.jaxp.DocumentBuilderImpl.parse(Unknown Source) at javax.xml.parsers.DocumentBuilder.parse(Unknown Source) at com.bea.p13n.delegation.management.internal.DelegationHierarchyParser.getDelegationHierarchy(DelegationHierarchyParser.java:102) at com.bea.p13n.delegation.management.internal.DelegationHierarchyAbstractPersistenceManager.parseData(DelegationHierarchyAbstractPersistenceManager.java:206) ... 129 more
---End Stack Trace---

I have the same problem with Weblogic 8.1 SP5 running on Itanium (the same appl. running on Xeon runs OK).

Error occurred while parsing: Start of root element expected.

This my code i use to try inserting xml data:
v_BFile := BFILENAME('XML_DIR',v_xmlfile);
DBMS_LOB.createTemporary(v_clob, cache=>false);
DBMS_LOB.open(v_bFile, DBMS_LOB.lob_readonly);
DBMS_LOB.loadFromFile(v_clob,v_BFile,DBMS_LOB.getLength(v_bfile));
DBMS_LOB.close(v_bfile);
v_parser := XMLPARSER.newParser;
XMLPARSER.parseClob(v_parser,v_clob);
On the parseClob is get the error message: Error occurred while parsing: Start of root element expected.
My xml is as follows
<?xml version="1.0" ?>
<EMPLOYEES>
<EMP>
<EMPNO>8000</EMPNO>
<ENAME>JONES</ENAME>
<JOB>DBA</JOB>
<MGR>7839</MGR>
<HIREDATE>07-MAY-2002</HIREDATE>
<SAL>100</SAL>
<COMM>10</COMM>
<DEPTNO>10</DEPTNO>
</EMP>
<EMP>
<EMPNO>8001</EMPNO>
<ENAME>SMITH</ENAME>
<JOB>PROG</JOB>
<MGR />
<HIREDATE>01-MAY-2002</HIREDATE>
<SAL>200</SAL>
<COMM>10</COMM>
<DEPTNO>10</DEPTNO>
</EMP>
</EMPLOYEES>
What do i do wrong. Can someone help me

Kurt
Can you answer the following questions
Which Release of the database are you using ?
What is the database character set ?
What is the character set encoding of the source document ?
Remember that the loadFromFile procedure is designed to load binary data, and does not convert data into the database character set. If the database character set is UTF8, then the CLOB data has to be UCS2.
Can you dump the contents of the CLOB
If you are using 9iR2 then you can use the new procedure GetCLOBFromFile which will perform the correct coversions.
Also in 9iR2 we would recommend the use of the DBMS_XMLPARSER package, rather than the XMLPARSER package. The reason for this is the DBMS_XMLPARSER makes use of a 'C' based parser, running as native compiled code, which XMLPARSER still uses the Java based version of the parser. Performance with DBMS_XMLPARSER is much better.
Hope this helps

Apple TV2 throwing "An error occurred while loading this content"

Hi
I have purchased an Apple TV2 recently and tried to watch rental movies. Preview of all the movies working fine but after rental is consistently giving error "An error occurred while loading this content". I have 8Mbps line and can rent movies from my PC and also from iPad. But Apple TV is giving this error.It also gibe similar error while trying to watch video podcasts of bigger size. I have done the recent apple TV update but no luck. Frustrating. Any help from any one. I have now rentals on my Apple TV that can not viewed and going to expire in 3 weeks.
Regards
Anil

are you renting these movies directly from the appleTV or are you renting/downloading from iTunes on a computer then streaming to appleTV?

ATV2: Error occurred while loading this content

This error started appearing out of the blue today. And I'm nearly at my wits end with this, because no solution I could possibly think of makes any difference. I would get this error intermittently once a month or so, but unplugging ATV2 and doing a cold start would usually resolve this.
Any ideas? Anyone?
Symptoms:
"An error occurred while loading this content" appears
It appears exclusively for movies, TV shows and music in my iTunes library
It affects all media - nothing in my iTunes library will play
Streaming of purchased content form iTunes store is not affected by this error
I am able to play my iTunes content on my Mac
I am able to play my iTunes content on a different Mac via HomeSharing
I am unable to play any media stored in my iTunes library on my ATV. Period.
What I've tried (to no avail):
Power cycled my cable modem (DOCSIS 3 compliant)
Power cycled my AirPort
Power cycled my Mac
Power cycled my ATV2
Logged out of iTunes store on Mac and ATV2 and logged back in
Turned off Home Sharing on Mac and ATV2 and started it up again
My setup:
I have a 25+ mbps cable internet
Airport Extreme is my main router
Mac is connected to AE via ethernet (it houses my iTunes library and has WiFi shut off)
ATV2 is connected to AE via ethernet as well
Both Mac and ATV2 have reserved IP addresses on Airport Extreme and always get the same IP, no conflicts
Both Mac and ATV2 have a good connection speed when tested
All software and firmware is up to date and Mac, AE and ATV2

You are definitely NOT the only one here with this MAJOR issue: http://discussions.apple.com/thread.jspa?threadID=2615363
I have the same issue, and I have a 6MB AT&T Elite Pro DSL service that I have always had since purchasing my ATV2 in October. Never have I had these issues until the 4.2 update. Horrible software bug and it keeps coming back up. TV shows, movies, etc. No rhyme or reason. Some shows new, some old. Some movies HD, some SD. It is almost as if the Apple TV rolls a die and if I get an odd number, I get the error message. Even number, it plays through...
Why would Apple continue to release software updates that do not address these issues? We have to keep leaving Apple feedback on this issue that is big enough that over 13,000 views on their own message board confirm this problem since the 4.2 software update a few weeks ago...
Tell your friends: http://www.apple.com/feedback/appletv.html

An error occurred while loading this content apple tv 2

I get "An error occurred while loading this content" when trying to view a rental movie. Not all of them but a few rentals. I wonder why only a few?

Has any other fixes been found. Since I updated to the latest iOS I've been having a similar problem. It doesn't matter what I stream through either. I bought I ATV2 when they first came out and have been using it perfectly fine, however after the last update I haven't been able to stream my movies, tv or even Netflix.
I've also been having issues with my ATV2 connecting to my windows 7 desktop where I store all of my movies and TV shows. I have to deauthorize home sharing and turn it back on for my ATV2 to recognize that it is even on. Frustrating to say the least.

An error occurred while loading this content - only with iPhone not iPad

I know this issue has been discussed to death with no real solution in sight but my case is slightly different:
1. On my new iPad, I select AppleTV (not mirroring), open Safari, then to YouTube and play any HD video. Immediately, the video will be streamed to the AppleTV with no hassle.
2. I do the same on my iPhone 4, 4S or 5 and all I get is "An error occurred while loading this content. Try again later". This occurs without fail.
If I use Jasmine YouTube client, streaming will work perfectly but alas, this app is prone to the error message "Youtube has restricted feeds for this video" and thus, I can't use this.
If I use the new google youTube app, only the audio gets streamed to the AppleTV. I have to use mirroring and the video does not fill the TV screen but leaving a dark border all round. The streaming is not smooth either. The previous youTube app by Apple works perfectly - never had an issue. As soon as iOS6 came along, I end up with all these problems.
Is there a solution to all this? Currently, I use only my iPad for streaming YouTube videos but I really want to use my spanking new iPhone 5 but can't.
I am so sad.
Can anyone help or am I doomed to use only my iPad for this? I am soooo disappointed with the iPhone 5 due to this.

Has any other fixes been found. Since I updated to the latest iOS I've been having a similar problem. It doesn't matter what I stream through either. I bought I ATV2 when they first came out and have been using it perfectly fine, however after the last update I haven't been able to stream my movies, tv or even Netflix.
I've also been having issues with my ATV2 connecting to my windows 7 desktop where I store all of my movies and TV shows. I have to deauthorize home sharing and turn it back on for my ATV2 to recognize that it is even on. Frustrating to say the least.

ORA-20100: Error occurred while parsing: Start of root element expected.

I've been searching everywhere for a reason to the following error message: ORA-20100: Error occurred while parsing: Start of root element expected.
I get this when attempting to parse an XML file stored as a CLOB using the xmlparser.parseClob procedure
Any help would be much appreciated.

I initially used US ASCII but then tried several unicode formats as created by XML Spy (UTF16, Unicode16, Unicode32). All had the exact same result.
Exactly what would be the most helpful output? The XML documents are varied, mostly very simple, but do you want the CLOB printed some other way?
--Joan Armstrong
null

Error installing Azure SDK 2.2: An error occurred while parsing Entityname. Line 1031, position 71.

I am setting up a new machine for windows azure development. I have VS 2013 Ultimate with Team Explorer on Windows 7 Enterprise. When I launch the Web Installer for Azure SDK 2.2 I receive a dialog almost immediately with the message:
An error occurred while parsing EntityName. Line 1031, position 71.
I ran the same installer on another machine with similar configuration of VS2013 and Win 7, and it doesn't display this dialog.
Any help/guidance is appreciated.

Hi,
Based on your description, you install Azure SDK successful in a similar configuration machine, but it give "An error occurred while parsing EntityName. Line 1031, position 71" error in your target machine, from my research, this may be Microsoft
server-side error, refer to
http://stackoverflow.com/questions/14964634/wpi-4-5-error-after-upgrading fro more details. I would suggest you reinstall, if any further issue, please feel free to let e know.
Best Regards
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

HT201077 An error occurred while joining this photo stream. Please try again later.

Why am I getting this error message? An error occurred while joining this photo stream. Please try again later.

Welcome to the Apple Community.
Have you tried again later. Have you asked the owner if they can access the photos.

An error occurred while parsing EntityName. Line 1, position 3224

Hi all...
We are implementing a SAP standard solution as per NOTE 1003730
we are facing problem while transferring data to Government Gateway and error generated as
"An error occurred while parsing EntityName. Line 1, position 3224"
tried counting the posiitons in payload....could get any luck....
any inputs around this will be of gr8 help.
Full error text as follows:
- <GovTalkErrors>
- <Error>
<RaisedBy>System</RaisedBy>
<Number>1001</Number>
<Type>fatal</Type>
<Text>An error occurred while parsing EntityName. Line 1, position 3224.</Text>
<Location />
</Error>
</GovTalkErrors>
Regards.

Hi,
Could tell us what EntityName's value is ? Or what's at this char position ?
Rgds
Chris

"error occurred while loading this content" ... ATV2 not even 24hrs old...

I just bought this ATV2. I am using AT&T internet with an EDGE250AEW wireless router and a Motorola modem.
I'm attempting to rent movies with my ATV2 and watch them. After a myriad of times of trying to just sign into my iTunes account via ATV2, I finally was able to rent a movie.
When I click on the movie to rent, I'll press "PLAY" and it will give me the message "error occurred while loading this content".
I realize my internet connection is slow (1.5M) so I am renting in SDef ... but that still shouldn't be preventing me from even being able to rent a movie.
I attempt to watch a movie preview ... and a 2 minute movie preview takes over 5 minutes to load ... and it wont start playing until it's completely loaded. Bollocks!
I have updated my software, I have rebooted, I have restarted, I have recycled ... no avail.
Is this a PORT opening issue? I dont know what is going on but it's REALLY frustrating to have a 100 dollar paper weight.
I AM able to use home sharing and watch movies from my Macbook iTunes to the ATV2 ... but rentals from the store via the ATV2 doesn't work.
help please

You are definitely NOT the only one here with this MAJOR issue: http://discussions.apple.com/thread.jspa?threadID=2615363
I have the same issue, and I have a 6MB AT&T Elite Pro DSL service that I have always had since purchasing my ATV2 in October. Never have I had these issues until the 4.2 update. Horrible software bug and it keeps coming back up. TV shows, movies, etc. No rhyme or reason. Some shows new, some old. Some movies HD, some SD. It is almost as if the Apple TV rolls a die and if I get an odd number, I get the error message. Even number, it plays through...
Why would Apple continue to release software updates that do not address these issues? We have to keep leaving Apple feedback on this issue that is big enough that over 13,000 views on their own message board confirm this problem since the 4.2 software update a few weeks ago...
Tell your friends: http://www.apple.com/feedback/appletv.html

ORA-20100: Error occurred while parsing:Error opening external DTD ( Asap)

Hi I'm using domsample example. And I have written the program. The xml file at the starting has this string"<!DOCTYPE MobileInventoryResponse SYSTEM "MobileInventoryResponse.dtd">", from which I'm getting error -"ORA-20100: Error occurred while parsing: Error opening external DTD".
I'm new to xml could you please help me to solve this problem. I assume this is related to DTD for which I need to set base path. But I'm not sure how to do it? I'm getting this xml file through CLOB which I'm able to parse until an extent. where in between got this error.
Here is my partial code:
l_doc_id := rec_xml_data.id;
l_xml_parser := xmlparser.newParser;
xmlparser.setValidationMode(l_xml_parser, FALSE);
xmlparser.parseCLOB(l_xml_parser,rec_xml_data.l_xml_data);--PARSING THE CLOB WHICH CONTAINS XML FILE
l_xml_doc := xmlparser.getDocument(l_xml_parser);
xmlparser.freeParser(l_xml_parser);
l_nodelist := xmldom.getElementsByTagName(l_xml_doc, '*');
l_length := xmldom.getLength(l_nodelist);
-- loop through elements
FOR l_rec_xml in 0..l_length-1
LOOP
l_node := xmldom.item(l_nodelist, l_rec_xml);
-- dbms_output.put(xmldom.getNodeName(n) || ' ');
-- get the text node associated with the element node
l_nodename:=xmldom.getNodeName(l_node);
l_node := xmldom.getFirstChild(l_node);
IF (xmldom.isNull(l_node) = false) THEN
IF xmldom.getNodeType(l_node) = xmldom.TEXT_NODE THEN
IF l_nodename = 'purchase-order-number' THEN
l_po_num:=NULL;
l_po_num:= xmldom.getNodeValue(l_node);
-- dbms_output.put_line('Purchaser Order Num : '||l_po_num);
END IF;
from here onwards I get the string values
Now I don't know where to set the DTD basepath or baseurl. I need it asap.
Regards,
Naveen.

The version which I'm working on is 10.2.0.4.
XML File---
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE MobileInventoryResponse SYSTEM "MobileInventoryResponse.dtd">
<MobileInventoryResponse>
<message>
<message-header>
<message-id>16244182</message-id>
<transaction-name>ship-advice</transaction-name>
<partner-name>cbeyond</partner-name>
<source-url>http://www.brightpoint.com</source-url>
<create-timestamp>20080826150709</create-timestamp>
<response-request>1</response-request>
</message-header>
<ship-advice>
<header>
<customer-id>297859</customer-id>
<shipment-information>
<ship-first-name>RA_13Aug_1</ship-first-name>
<ship-last-name>MIND</ship-last-name>
<ship-address1>test</ship-address1>
<ship-city>test</ship-city>
<ship-state>VA</ship-state>
<ship-post-code>22102-4931</ship-post-code>
<ship-country-code>US</ship-country-code>
<ship-phone1>0040726335068</ship-phone1>
<ship-email>[email protected]</ship-email>
<ship-via>FX01</ship-via>
<ship-request-date>20080826</ship-request-date>
<ship-request-warehouse>CBY1</ship-request-warehouse>
</shipment-information>
<purchase-order-information>
<purchase-order-number>380928</purchase-order-number>
<account-description />
<purchase-order-amount>0.0</purchase-order-amount>
<currency-code>USD</currency-code>
</purchase-order-information>
<order-header>
<customer-order-number>0002759</customer-order-number>
<customer-order-date>20080826</customer-order-date>
<order-sub-total>19.0</order-sub-total>
<order-discount>0.0</order-discount>
<order-tax1>0.0</order-tax1>
<order-tax2>0.0</order-tax2>
<order-tax3>0.0</order-tax3>
<order-shipment-charge>18.0</order-shipment-charge>
<order-total-net>0.0</order-total-net>
<order-status>Completed</order-status>
<order-type />
<brightpoint-order-number>35028788</brightpoint-order-number>
<warehouse-id>CBY1</warehouse-id>
<ship-date>20080826</ship-date>
</order-header>
</header>
<detail>
<line-item>
<line-no>1</line-no>
<item-code>SKU1</item-code>
<universal-product-code>0</universal-product-code>
<ship-quantity>1.0</ship-quantity>
<unit-of-measure>EA</unit-of-measure>
<serial-list>
<serial-numbers>
<esn>TIMI000013</esn>
</serial-numbers>
</serial-list>
<line-status />
<base-price>0.0</base-price>
<line-discount>0.0</line-discount>
<line-tax1>0.0</line-tax1>
<line-tax2>0.0</line-tax2>
<line-tax3>0.0</line-tax3>
<bill-of-lading>929406733828</bill-of-lading>
<scac>FX01</scac>
</line-item>
</detail>
</ship-advice>
<transactionInfo>
<eventID>16244182</eventID>
</transactionInfo>
</message>
</MobileInventoryResponse>
XML FILE END--------------------
MY PROGRAM IS AS BELOW---
get_eai_data_prc( x_ret_code OUT NUMBER
,p_debug_flag IN VARCHAR2
IS
--Local Variables
l_xml_parser xmlparser.Parser;
l_xml_doc xmldom.DOMDocument;
l_xml_data CLOB;
l_nodelist xmldom.DOMNodeList;
l_length NUMBER := 0;
l_num_cnt NUMBER := 0;
l_node xmldom.DOMNode;
l_docelem DBMS_XMLDOM.DOMElement; -- XML DOM element.
l_nodeValue VARCHAR2(30); -- Text value of the node.
l_nodename VARCHAR2(100);
l_po_num VARCHAR2(150);
l_account_desc VARCHAR2(150);
l_cust_ord VARCHAR2(150);
l_ship_date VARCHAR2(150);
l_item_code VARCHAR2(150);
l_ship_qty VARCHAR2(150);
l_esn VARCHAR2(150);
l_cust_channel_type VARCHAR2(150);
l_cust_grp_acct VARCHAR2(150);
l_max_doc_id NUMBER;
l_doc_id NUMBER;
l_market_id VARCHAR2(150);
l_record_id VARCHAR2(30);
TYPE l_esn_table IS TABLE OF VARCHAR2(30)
INDEX BY BINARY_INTEGER;
l_data l_esn_table;
--CURSOR TO GET XML DATA FROM EAI
CURSOR cur_xml_data(p_doc_id VARCHAR2)
IS
SELECT id
,document l_xml_data
FROM tds_xml_store_temp
WHERE id >= id ;
BEGIN
FOR rec_xml_data IN cur_xml_data(l_max_doc_id)
LOOP
l_doc_id := rec_xml_data.id;
l_xml_parser := xmlparser.newParser;
xmlparser.setValidationMode(l_xml_parser, FALSE);
xmlparser.parseCLOB(l_xml_parser,rec_xml_data.l_xml_data);
l_xml_doc := xmlparser.getDocument(l_xml_parser);
xmlparser.freeParser(l_xml_parser);
l_nodelist := xmldom.getElementsByTagName(l_xml_doc, '*');
l_length := xmldom.getLength(l_nodelist);
-- loop through elements
FOR l_rec_xml in 0..l_length-1
LOOP
l_node := xmldom.item(l_nodelist, l_rec_xml);
-- dbms_output.put(xmldom.getNodeName(n));
-- get the text node associated with the element node
l_nodename:=xmldom.getNodeName(l_node);
l_node := xmldom.getFirstChild(l_node);
IF (xmldom.isNull(l_node) = false) THEN
IF xmldom.getNodeType(l_node) = xmldom.TEXT_NODE THEN
IF l_nodename = 'purchase-order-number' THEN
l_po_num:=NULL;
l_po_num:= xmldom.getNodeValue(l_node);
-- dbms_output.put_line('Purchaser Order Num : '||l_po_num);
END IF;--purchase-order-number
IF l_nodename = 'account-description' THEN
l_account_desc :=NULL;
l_account_desc := xmldom.getNodeValue(l_node);
END IF;
IF l_nodename = 'customer-channel-type' THEN
l_cust_channel_type:=NULL;
l_cust_channel_type:= xmldom.getNodeValue(l_node);
END IF;
IF l_nodename = 'customer-group-account' THEN
l_cust_grp_acct := NULL;
l_cust_grp_acct := xmldom.getNodeValue(l_node);
END IF;
IF l_nodename = 'customer-order-number' THEN
l_cust_ord:=NULL;
l_cust_ord:= xmldom.getNodeValue(l_node);
-- dbms_output.put_line('Customer Order NUm : '||l_cust_ord);
END IF;--customer-order-number
IF l_nodename = 'ship-date' THEN
l_ship_date:=NULL;
l_ship_date:= xmldom.getNodeValue(l_node);
-- dbms_output.put_line('Ship Date : '||to_date(l_ship_date,'YYYY-mm-dd'));
END IF;--ship-date
IF l_nodename = 'item-code' THEN
l_item_code:=NULL;
l_item_code:= xmldom.getNodeValue(l_node);
-- dbms_output.put_line('Item Code : '||l_item_code);
END IF;--item-code
IF l_nodename = 'esn' THEN
l_esn:=NULL;
l_num_cnt := l_num_cnt + 1;
l_esn:=xmldom.getNodeValue(l_node);
l_data(l_num_cnt) := l_esn;
-- dbms_output.put_line('Serial Num : '||l_esn);
END IF;--esn
IF l_nodename = 'market-id' THEN
l_market_id := NULL;
l_market_id := xmldom.getNodeValue(l_node);
END IF;
IF l_nodename = 'ship-quantity' THEN
l_ship_qty:=NULL;
l_ship_qty:= xmldom.getNodeValue(l_node);
-- dbms_output.put_line('Ship Quantity : '||l_ship_qty);
END IF;--ship-quantity
END IF;--xmldom.TEXT_NODE
END IF;
END LOOP;--l_rec_xml
FOR j in l_data.first..l_data.last
LOOP
INSERT INTO cbey_shipment_int_stg( purchase_order_number
,account_description
,customer_order_number
,ship_date
,item_code
,ship_quantity
,esn
,customer_channel_type
,customer_group_account
,market_id
,eai_xml_doc_id
,record_status
,record_id
VALUES
( l_po_num
,l_account_desc
,l_cust_ord
,to_date(l_ship_date,'YYYY-mm-dd')
,l_item_code
,l_ship_qty
,l_data(j)
,l_cust_channel_type
,l_cust_grp_acct
,l_market_id
,l_max_doc_id
,'NEW'
,CBEY_RECORD_ID_SEQ_S.nextval
END LOOP;--j
UPDATE cbey_interface_run_log
SET request_id = l_conc_req_id
,lastrun_date = SYSDATE
,doc_id = rec_xml_data.id
WHERE program_id = 'SHIPMENT_INT'
AND doc_id =l_max_doc_id;
l_data.delete;
l_num_cnt :=0;
END LOOP; --rec_xml_data
COMMIT;
END of the Procedure--------------------------
Now if I load the xml file without the this :- <!DOCTYPE MobileInventoryResponse SYSTEM "MobileInventoryResponse.dtd">
it works well. But it gives error when this particular thing is there.
Regards,
Naveen
Edited by: MAN on Oct 17, 2008 7:28 AM

ORA-20100: Error occurred while parsing (from xml in custom schema)

Hi,
I am using xmlParser and xmlDom to extract information from xml document. My whole process works perfectly in the APPS schema on the Oracle e-Business Suite. The minute I move it to a custom schema (ie new User) I get this error.
ORA-20100: Error occurred while parsing: Element '' used but not declared.
This only occures at runtime. I am pretty sure I grant the correct SELECT and EXECUTE privileges to this Schema. If I hadn't then it would not compile. It compiles without errors on the Database.
Any help will be appreciated.
Thanks in advance.
Regards
Dave

I just tried this again. I have Oracle9i 9.0.1.1 on my Windows
2000 laptop.
I went to OTN and downloaded the XDK 9.0.2D for PL/SQL
I used loadjava to load the \oracle\ora90\rdbms\jlib\xdb_g.jar
file into the database (shouldn't have had to do this) into the
XMLBOOK account. Filed a bug for needing to do this by hand.
I ran "xdkload.bat" with xmlbook/xmlbook as the username/password
I made sure the proxy server name was set correctly in the
example (if you don't need a proxy server, comment out that line
in the parse_xml_news.sql example, or that could cause your
error!!)
I ran the parse_xml_news.sql script, and I get:
Top Stories on XML from Moreover.com on December 21st, 2001
( 1) CEO highlights Mercator Softwares single biggest opportunity
( 2) WWRE Chooses webMethods
( 3) WebMethods, retail exchange ink deal
( 4) Worldwide Retail Exchange Chooses webMethods
( 5) Worldwide Retail Exchange Chooses webMethods
( 6) WorldWide Retail Exchange choses webMethods for integration
( 7) XML: Wherever You Go, There You Are
( 8) Chap. 13: Metadata
( 9) Enterprise Adoption of XML Made Simple
(10) XML Databases
(11) Using CSS2 to display XML documents
(12) How XML could bring an end to all of your troubles
(13) Effort Launched To Bring Classic Macs Rich Metadata To Mac
(14) Sneak attack on Pearl Harbor roused publics anger, resolve
(15) Drug dogs whiff worth $230,000
(16) PORTLAND Police target
(17) 11-year-old cant seem to get out of jury duty
(18) Another casualty of war: Proposed waterfront museum
(19) webMethods Establishes Sales Operations in Brussels
(20) Using Emacs for XML documents
(21) Gates: XML could be everything we dreamed...
(22) XML: The end of all your troubles?
(23) Java XML
(24) Tool To Compare XML Files
(25) Fairfax County Sends webMethods to School
(26) webMethods Embraces Web Services
(27) WebMethods Supports Web Services
(28) Accessing metadata through Reflection
(29) When format is foremost
(30) Views from Abroad: XML Pipelines and Delta XML

A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (p

A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that
the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)(Microsoft SQL Server, Error: 2)
The system cannot find the file specified
Cannot connect to COWBOYS.
Here are the technical details===================================
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider:
Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%20SQL%20Server&EvtSrc=MSSQLServer&EvtID=2&LinkId=20476
Error Number: 2
Severity: 20
State: 0
Program Location:
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
at System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, Boolean withFailover)
at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean ignoreSniOpenTimeout, TimeoutTimer timeout, Boolean withFailover)
at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance, SqlConnectionString connectionOptions, SqlCredential credential, TimeoutTimer
timeout)
at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(TimeoutTimer timeout, SqlConnectionString connectionOptions, SqlCredential credential, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, SqlCredential credential, Object providerInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance,
SqlConnectionString userConnectionOptions, SessionData reconnectSessionData)
at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, DbConnectionPoolKey poolKey, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionFactory.TryGetConnection(DbConnection owningConnection, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal oldConnection, DbConnectionInternal& connection)
at System.Data.ProviderBase.DbConnectionInternal.TryOpenConnectionInternal(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionClosed.TryOpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
at System.Data.SqlClient.SqlConnection.TryOpenInner(TaskCompletionSource`1 retry)
at System.Data.SqlClient.SqlConnection.TryOpen(TaskCompletionSource`1 retry)
at System.Data.SqlClient.SqlConnection.Open()
at Microsoft.SqlServer.Management.SqlStudio.Explorer.ObjectExplorerService.ValidateConnection(UIConnectionInfo ci, IServerType server)
at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser()
===================================
The system cannot find the file specified
I have tried from so many forms. This is so frustrating. Thank for everyone/anyone who wants to help. So this is what happened: I had to uninstall my previous sqlserver 2012(which worked great) for some reason, and I uninstalled everything from that download.
Then I installed the trial edition of sql server 2012 (64 Bit) and It wouldn't connect to the database. (Error mentioned above.) My local DB is COWBOYS. (COWBOYS is also my computer name.) After this, I have tried downloading sqlexpress and sqlserver 64bit
many times and cannot connect to my local DB.
How do I connect to my Local DB?
Also, I think this might help: (When I run sqlserve.exe, which I was able to find in C:\Program Files\Microsoft SQL Server\110\LocalDB\Binn, I get an error: Your SQL server installation is either corrupt or has been tampered with(Error getting
instance ID from name). Please uninstall then re-run setup to correct this problem.
I would happily re install it, if it wasn't my 20th time.
I don't have any remote connections, I don't use username/password, only window authentication. I work mostly on visual studio, but without able to store /retrieve data, I don't know how to survive.
May be the solution is very simple, but I am too frustrated.
Some of the things I have tried:
From a command prompt, enter one of the following commands:
net start "SQL Server Agent (MSSQLSERVER)" OR
net start "SQL Server Agent(instancename)"(for instance)
on my sql configuration, I cannot start anything because there is nothing there to start. I can post more details, if that would help. Also, some more details about the error:
Details
Product:
SQL Server
ID:
2
Source:
MSSQLServer
Version:
10.0
Component:
SQLEngine
Message:
An error has occurred while establishing a connection to the server. When connecting to SQL Server, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error:
40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
Explanation
SQL Server did not respond to the client request because the server is probably not started.
User Action
Make sure that the server is started.
Version:
9.0
Component:
SQLEngine
Message:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error:
40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
Explanation
SQL Server did not respond to the client request because the server is probably not started.
User Action
Make sure that the server is started.
Any one that can help me, I will be greatful. Thank you so much. p.s. please ask me anything if you have any questions.

It sounds like there are a couple things going on here. First check if you have a successful install of SQL Server, then we'll figure out the connection issues.
Can you launch SQL Server Configuration Manager and check for SQL Server (MSSQLSERVER) if default instance or SQL Server (other name) if you've configured your instance as a named instance. Once you find this, make sure the service is started.
If not started, try to start it and see if it throws an error. If you get an error, post the error message your hitting. If the service starts, you can then launch SSMS and try to connect. If you have a default instance, you can use the machine
name in the connection dialog. Ex: "COWBOYS" where Cowboys is the machine name. However, if you named the SQL Server instance during install, you'll need to connect using the machine\instance format. Ex: COWBOYS\Romo (where Romo
is the instance name you set during install).
You can also look at the summary.txt file in the SQL Server setup error logs to see what happened on the most recent install. Past install history is archived in the log folder if you need to dig those up to help troubleshoot, but the most
recent one may help get to the bottom of it if there is an issue with setup detecting a prior instance that needs to be repaired.
Thanks,
Sam Lester (MSFT)
http://blogs.msdn.com/b/samlester
This posting is provided "AS IS" with no warranties, and confers no rights. Please remember to click
"Mark as Answer" and
"Vote as Helpful" on posts that help you. This can be beneficial to other community members reading the thread.

An error occurred while parsing a contents stream. Unable to analyze the PDF file

Similar Messages

Maybe you are looking for