"...an error occurred while sending data from the iPhone" - caused by latest iPhone update today?
I've been syncing my iPhone to my (non-apple) desktop for several months without difficulty.
Today I accepted the latest upgrade to my iPhone software.
Since it installed, it will not sync.
It gives the error message "iTunes could not sync calendars to the iPhone "Steve's iPhone" because an error occurred while sending data from the iPhone." After rebooting the desktop, the error repeats, and it's now in hour 2 of the continuing message "Syncing Steve's iPhone (Step 2 of 2) - Finishing sync"
Has anyone else run into this Undocumented Feature of the latest upgrade?
As bugs go, this is pretty serious for those of us who depend on syncing the iPhone and desktop for our business!
Thanks to anyone who can help!
Steve Callender
Tried rebooting the phone, and now it works.
Guess there's 2 lessons here -
Boot again when installing new SW, even if the phone reboots itself during installation, and
Boot to see if that fixes a problem before posting it.
Steve
Similar Messages
-
Need solution for the following sync error: "iTunes could not sync calendars to the iPad "iPad name" because an error occurred while sending data from the iPad"
I want to add that I deleted all the old back-ups and created a new back-up without any issues except sync problem.
-
Began when Apple replaced my HD on my iMac. I can backup without any problems but when it is time to sync, I get this error.
I want to add that I deleted all the old back-ups and created a new back-up without any issues except sync problem.
-
i can't send an e-mail from thunderbird, it was working well though , suddenly it says the following message:An error occurred while sending mail. The mail server responded An error occurred while sending mail. The mail server responded: (Alis-MacBook-Air.local) [46.138.187.135]:51054 is currently not permitted
OR
i have changed the port from 587 to 465 but still cannot send e-mail, it keep sending and sending for 5 minutes and respond is time out?Can you post your Troubleshooting Information?
Help (Alt-H) - Troubleshooting Information -
"An error occurred while extracting files from the package "BaseSystem.pkg".
Hello!
I have a
MacBookPro5,5
Prozessortyp:Intel Core 2 Duo
Prozessorgeschwindigkeit:2.26 GHz
Anzahl der Prozessoren:1
Gesamtzahl der Kerne:2
L2-Cache:3 MB
Speicher:2 GB
Busgeschwindigkeit:1.07 GHz
Boot-ROM-Version:MBP55.00AC.B03
SMC-Version (System):1.47f2
Hardware-UUID:A2DD27C4-9829-5A4D-854B-485EF8A6B20F
Problem:
I upgraded Leopard to Snow Leopard. Everything worked fine for a month. To free up disk space I deleted some of the iPhoto flders (modfied and original images). Everything worked still fine. Shut down the computer. Next day it was incredibly slow. At the same time the indexing was running. I stopped indexing, but stll slow. Every operation took minutes. I tried all the tricks that I found in the internet (repaired file permissions, repaired disk, cleared PRAM , moved big filed from desktop, etc.). After 24 full hours of trying all this I decided to erase the hard drive and reinstall, directly from the Snow Leopard Install disk, but it fails after downloading the packages. Below is the part of the log. Then I tried to use the old Leopard install DVD to reinstall Leopard, it then sais estimated time 12 hours or so and eventually crashed, spitting out a lot of "reportcrash" in the log. What is going on? I'm running out of options. Any advice? Would zeroing the hard drive help? If nothing else I plan to buy a new hard drive, since the only explanation I have is that there is a problem with the hard driven although the disk utility says it is OK. I need a bigger one anyway. Any ideas? Thank you!
Aug 16 05:17:31 localhost OSInstaller[139]: IFPKInstallElement (191 packages)
Aug 16 05:17:35 localhost OSInstaller[139]: PackageKit: ----- Begin install -----
Aug 16 05:17:35 localhost OSInstaller[139]: PackageKit: request=PKInstallRequest <191 packages, destination=/Volumes/Macintosh HD>
Aug 16 05:17:36 localhost OSInstaller[139]: PackageKit: Extracting /Volumes/Macintosh HD/Mac OS X Install Data/BaseSystem.pkg (destination=/Volumes/Macintosh HD/.OSInstallSandbox-tmp/Root, uid=0)
Aug 16 05:31:59 localhost Unknown[80]: /SourceCache/AppleFSCompression/AppleFSCompression-24.0.1/Common/DataPool.c:116 : Error: finished pool without filling it
Aug 16 05:31:59 localhost Unknown[80]: /SourceCache/AppleFSCompression/AppleFSCompression-24.0.1/Common/commonUtils.c: 315: Error: fh_pread -1
Aug 16 05:31:59 localhost Unknown[80]: /SourceCache/AppleFSCompression/AppleFSCompression-24.0.1/Common/StreamCompress or.c:236: Error: write failed for /Volumes/Macintosh HD/.OSInstallSandbox-tmp/Root//System/Library/Frameworks/OpenCL.framework/Versi ons/A/Resources/runtime.amdil.bc: Invalid argument
Aug 16 05:31:59 localhost Unknown[80]: /SourceCache/AppleFSCompression/AppleFSCompression-24.0.1/Common/StreamCompress or.c:260: Error: futimes failed for /Volumes/Macintosh HD/.OSInstallSandbox-tmp/Root//System/Library/Frameworks/OpenCL.framework/Versi ons/A/Resources/runtime.amdil.bc: Invalid argument
Aug 16 05:31:59 localhost Unknown[80]: /SourceCache/AppleFSCompression/AppleFSCompression-24.0.1/Common/StreamCompress or.c:829: Error: returning errno 22 from FinishStreamCompressorQueue
Aug 16 05:32:10 localhost OSInstaller[139]: PackageKit: Install Failed: PKG: extracting "com.apple.pkg.BaseSystem"\nError Domain=PKInstallErrorDomain Code=110 UserInfo=0x12c8366a0 "An error occurred while extracting files from the package “BaseSystem.pkg”." Underlying Error=(Error Domain=BOMCopierFatalError Code=22 UserInfo=0x12e703300 "The operation couldn’t be completed. FinishStreamCompressorQueue error") {\n NSFilePath = "/Volumes/Macintosh HD/.OSInstallSandbox-tmp/Root";\n NSLocalizedDescription = "An error occurred while extracting files from the package \U201cBaseSystem.pkg\U201d.";\n NSURL = "BaseSystem.pkg -- file://localhost/Volumes/Macintosh%20HD/Mac%20OS%20X%20Install%20Data/index.pro duct";\n NSUnderlyingError = "Error Domain=BOMCopierFatalError Code=22 UserInfo=0x12e703300 \"The operation couldn\U2019t be completed. FinishStreamCompressorQueue error\"";\n PKInstallPackageIdentifier = "com.apple.pkg.BaseSystem";\n}
Aug 16 05:32:10 localhost OSInstaller[139]: install:didFailWithError:Error Domain=PKInstallErrorDomain Code=110 UserInfo=0x12c8366a0 "An error occurred while extracting files from the package “BaseSystem.pkg”." Underlying Error=(Error Domain=BOMCopierFatalError Code=22 UserInfo=0x12e703300 "The operation couldn’t be completed. FinishStreamCompressorQueue error")
Aug 16 05:32:11 localhost OSInstaller[139]: Install failed: Die Installation ist aufgrund eines Fehlers fehlgeschlagen. Wenden Sie sich an den Hersteller der Software.
Aug 16 05:32:13 localhost OSInstaller[139]: Allowing machine sleep.
Aug 16 05:32:15 localhost OSInstaller[139]: Memory statistics for 'Installation ist fehlgeschlagen' pane:
Aug 16 05:32:15 localhost OSInstaller[139]: Physical Memory Allocation: 139 MB wired, 259 MB trapped, 397 MB active, 7 MB inactive, 1246 MB free, 1650 MB usable, 2048 MB totalIt sounds to me like your Internal Hard Drive is failing.
I recommend you buy a new one, that is a good candidate for replacing the old one, but install it in an External enclosure and Install a fresh Mac OS X on it from the DVD. You can boot your Mac from any attached drive.
The new System can be used to get some work done, check your emails, and takes the pressure off resolving this immediately. You can also attempt to salvage files off the old drive if needed.
Once things seem to be working, then move the new drive inside the computer. Failures at this point may be due to bad cable, which has been a problem in some of these MacBooks.
Use security erase, write Zeroes, one pass, to re-write every block on the old drive. Any block discovered to be bad will be replaced with spares the drive holds in reserve for this purpose. If more than 10 blocks are pared on one pass, "Initialization Failed!" will be the result. Although you can try the erase again, there is some question whether you want to trust this drive with your precious data. -
I have been using Thunderbird for a couple of years. On Friday 10 Apr my home email account stopped sending either new messages or replying to incoming emails. In addition I have Thunderbird get my work email and I can send and receive email just fine. I can also send email from my android phone and via the web.
The message that has started coming up is the following:
An error occurred while sending mail. The mail server responded: 5.7.1 [P4] Message blocked due to spam content in the message.. Please check the message and try again.
I have tried reinstalling Thunderbird but nothing changed, I tried changing the port from 25 to 587 to 465 but nothing changed. I do not understand what is going on as on Wednesday Apr 8 everything was working just fine.I have just tried ringing RCN and they tell me that because I am not using an RCN email as such they can not help but he suggested that it was a filter in Thunderbird but I have not set any filters and can not see if there are any or how to change them. The only way sending my website url right now is to make it not look like a url. Where do I need to look to solve this as I first wrote last week everything was fine.
-
Anyone can help with the below issue please? Much appreciated.
We have about 2k+ messages in sys.transmission_queue
Telnet to the ports 4022 is working fine.
Network connectivity has been ruled out.
The firewalls are OFF.
We also explicitly provided the permissions to the service account on Server A and Server B to the Service broker end points.
GRANT
CONNECT ON
ENDPOINT <broker> <domain\serviceaccount>
Currently for troubleshooting purposes, the DR node is also out of the Availability Group, which means that we right now have only one replica the server is now a traditional cluster.
Important thing to note is when a SQL Server service is restarted, all the messages in the sys.transmission queue is cleared immediately. After about 30-40 minutes, the errors are continued to be seen with the below
The
connection was
closed by the
remote end,
or an
error occurred while
receiving data:
'64(The specified network name is no longer available.)'We were able to narrow down the issue to an irrelevant IP coming into play during the data transfer. We tried ssbdiagnose runtime and found this error:
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Windows\system32>SSBDIAGNOSE -E RUNTIME -ID 54F03D35-1A94-48D2-8144-5A9D24B24520 Connect to -S <SourceServer> -d <SourceDB> Connect To -S <DestinationServer> -d <DestinationDB>
Microsoft SQL Server 11.0.2100.60
Service Broker Diagnostic Utility
An internal exception occurred: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
P 29830 Could not find the connection to the SQL Server that
corresponds to the routing address tcp://XX.XXX.XXX.199:4022. Ensure the tool is connected to this server to allow investigation of runtime events
The IP that corresponds to routing address is no where configured within the SSB. We are yet unsure why this IP is being referred despite not being configured anywhere. We identified that this IP belongs to one of nodes other SQL Server cluster, which has
no direct relation to the source server. We failed over that irrelevant SQL Server cluster and made another node active and to our surprise, the data from sys.transmission_queue started flowing. Even today we are able to reproduce the issue, if we bring
back this node [XX.XXX.XXX.199] as active. Since, its a high business activity period, we are not investigating further until we get an approved downtime to find the root cause of it.
When we get a approved downtime, we will bring the node [XX.XXX.XXX.199] as active and we will be running Network Monitor, Process Monitor and the SSB Diagnose all in parallel to capture the process/program that is accessing the irrelevant IP.
Once, we are able to nail down the root cause, I will share more information. -
I have set-up an ECT in SPD2013 on SP2013. It is a SQL Data source called ProjectWebApp. I have BCS/SSS set-up. I can create an ECT OK in SPD. I can add the ECT to a custom list.
The problem is when I add a new item in the list the following error message appears in red
An error occurred while retrieving data from ProjectWebApp. Administrators, see the server log for more information
I cannot filter or return any results. There is data in the DB.
Another test I do is to try and create a new App/List using the "External List" template. When
I select the ECT a red message appears "External Content Types are not available". which is odd since I can add an ECT to a list as mentioned above.
Any ideas?
Tx
Andrew
Andrew PayzeHi Andrew,
Please try the option Allow unlimited length in document libraries in the column settings:
http://littletalk.wordpress.com/2011/08/18/external-content-type-an-error-occurred-while-retrieving-data-from-a-system-administrators-see-the-server-log-for-more-information/
If it doesn't help, please refer to the link below and raise the External content type Read List operation thresholds:
http://lightningtools.com/bcs/business-connectivity-services-end-user-implications-part-one-threshold-limit-errors/
Please provide error message in ULS log for further troubleshooting.
Regards,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected] .
Rebecca Tu
TechNet Community Support -
Having been on Thunderbird for some years I have suddenly got the following message when trying to send mail.
An (SMTP) error occurred while sending mail. The server responded: Requested action aborted: This mail account has sent too many messages in a short amount of time. Please try later..
I have checked the SMTP server settings in tools, account settings and they are as they have always been. Is there something I have missed?Sending through web mail is totally irrelevant to using an SMTP server. The message even says it is from the server. Why do you think this is a Thunderbird problem.
The provider has put in place measures to keep people from spamming other email recipients using thier SMTP server. You have seen the result of those measures. -
When I send message the reply is "Access Denied" and a bunch of gobbly-gook ending with please re-check message. What would I check for? The G-G is of absolutely no value to the human species.
An error occurred while sending mail. The mail server responded: Access denied...3c61d9886161c1c1b119b169f84d0c00bd1d41014c8da58d391805d17cbcdccd89e9557dcc85058535d178217d0831cc6d65.... Please check the message and try again.
So what now. Mozilla must be the offspring of Microsoft in that help NEVER HELPS, EVER.Hello,
Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies do the following:
#Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
#Now click the ''Clear now'' button.
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
'''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that turns off some settings and disables most add-ons (extensions and themes).
''(If you're using an added theme, switch to the Default theme.)''
If Firefox is open, you can restart in Firefox Safe Mode from the Help menu by clicking on the '''Restart with Add-ons Disabled...''' menu item:<br>
If Firefox is not running, you can start Firefox in Safe Mode as follows:
* On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
''Once you get the pop-up, just select "'Start in Safe Mode"''
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
When you figure out what's causing your issues, please let us know. It might help others with the same problem.
Thank you. -
When I send mail, I keep getting this message.
An error occurred while sending mail. The mail server responded: "JunkMail rejected - 71-12-190-31.dhcp.leds.al.charter.com ([127.0.0.1])
[71.12.190.31]:52956 is in an RBL, see
http://www.spamhaus.org/query/bl?ip=71.12.190.31". Please check the message recipient [email protected] and try again.
How do I get rid of this problem?
WNSHi there,
If you have a closer look at message you are receiving it already states the problem. The domain 71-12-190-31.dhcp.leds.al.charter.com is blacklisted by spamhaus.org (is in an RBL).
Your TB is (my guess) setup to send the message directly to the recipient.
As a rule of thumb the majority of mail sent from a dynamic dns address (the kind of address you are getting from your ISP) is blacklisted as a precaution against spam abuse due to virus/trojan infected PC's.
Nothing you can change there. Stop sending the message directly and use your ISP's account instead.
/Frans -
My previous request had an incorrect email. This error began yesterday and I can't reply or send new emails from my PC, but email is working on my iphone.
I have been doing that. Here is the complete message I get. It was cut off in my initial question. "An error occurred while sending mail. The mail server responded: Authentication is required before sending [R0107005]. Please verify that your email address is correct in your Mail preferences and try again."
-
I am trying to send a message with an attachment, I get this message: An error occurred while sending mail. The mail server responded: 5.3.4 Requested action not taken; To send your message, please sign into your account online first and solve a puzzle. (Sorry for the inconvenience--these puzzles help us stop spammers.). Please check the message and try again.
== TodayMe too (with Thunderbird). EXCEPT it reads
Requested action not taken; This account is currently blocked from sending messages. If you don't think you've violated the Windows Live Terms of Use, please contact customer support...
Occasionally the mail "sends", but it is unpredictable. Tech Support at Qwest (for q.com under Windows Live) does not find a problem at their end.
More suspiciously, the same account accessed from my Mac does not seem to exhibit this problem. Have reloaded T'bird. Recurred again. -
An error occurred while sending mail. The mail server responded: Relaying not allowed.
Suddenly I am not able to send any email from my account, from pc or phone.
It gives error message "An error occurred while sending mail. The mail server responded: Relaying not allowed. Please check the message recipient --------and try again."
I have checked account setting and is correct. please helpThis message, which comes from the server, usually means that you are using an smtp server provided for use with one particular account to send messages "from" other accounts. The fact that it also happens with your phone does indicate that it is external to Thunderbird.
How many different email accounts do you have? How many different providers are involved? -
Hi this message appears after 2 hours downloading Mavericks in App Store :
an error occurred while extracting files from the package "mzps4135638417199433253.pkg"
Same with "CMD + R"
Help...It sounds to me like your Internal Hard Drive is failing.
I recommend you buy a new one, that is a good candidate for replacing the old one, but install it in an External enclosure and Install a fresh Mac OS X on it from the DVD. You can boot your Mac from any attached drive.
The new System can be used to get some work done, check your emails, and takes the pressure off resolving this immediately. You can also attempt to salvage files off the old drive if needed.
Once things seem to be working, then move the new drive inside the computer. Failures at this point may be due to bad cable, which has been a problem in some of these MacBooks.
Use security erase, write Zeroes, one pass, to re-write every block on the old drive. Any block discovered to be bad will be replaced with spares the drive holds in reserve for this purpose. If more than 10 blocks are pared on one pass, "Initialization Failed!" will be the result. Although you can try the erase again, there is some question whether you want to trust this drive with your precious data.
Maybe you are looking for
-
Problem With Turning On My iPOD Mini
Hello. I just got my new iPOD Mini. I had to send in my old one because it had received the "sad ipod icon". So, the service went smoothly, and I recieved it back within a week. Everything seemed to in order, except for one thing. Ususally, with an i
-
Unit of measure is not maintained at level2 DSO
Hi Experts, Unit of Measure is not maintained in level2 DSO. Scenario: We have a Product having values for different market in DSO UOM is Millions and Aggregated Value of that product is loaded in upper level DSO Unit of Measure is not maintained it
-
Can I access my itunes library from a different apple tv
Can I access my itunes library through my parents apple tv? I would like to show them photos from my library.
-
Removing a Video Stream From The Stage
what I have: main.swf 1 frame btns load various external.swfs I have 3 one swf (commercial.swf)has a slideshow inside using the SlideShowPro component Not the flv player problem: stream remains after swf is swapped out with new. AS code main timelin
-
Copy text from multiple fields to one field
I would like to copy text from multiple fields into one field. Each of these smaller fields will only be allowed to have one character. The larger field will not be able to be edited. So far, I have thought of creating a naming heirarchy for these fi