An error prevented the view from loading
I'm using SQL Server 2012 Express and I'm building a report with one table. I dragged and dropped two data set elements into the table that has two columns (Product Name and Product Description). Both the dataset elements have
a data type of varchar (50) in SQL Server 2012 Express. The table with those two elements is the only data I have in Design view. When I click on Preview, the Preview screen states 'An error prevented the view from loading.'. This is difficult
to diagnose, because in the Error List there are '0 Errors', '0 Warnings', and '0 Messages'. I would like help understanding if there is another error log I can observe to understand the issue, or if there are basic SQL Server 2012 Express Reporting
Services debugging techniques. Please help. Thank you,
Additionally, when I run the query in SQL Server 2012 Express and Reporting Services Query Designer the query results are correct.
Also, when I click the start debugging button, the report displays and I can export it to pdf, however the Previous still displays the error.
Well, funny stuff. I shut the solution down yesterday, then I booted my computer today and started the solution AND JUST LIKE MAGIC....it works. I can't explain it. Persistence pays, that's the answer sometimes.
Similar Messages
-
How to prevent the User from loading more than one seq file?
Hi,
I would like to prevent the tester operator from loading more than one test sequence. Any ideas how to do it?
Thanks
RafiHi Marty,
Marty_H wrote:
Hello mhousel,
Testexec.exe by default loads the sequence files that were last open when it runs. It is often desired behavior to have multiple sequence files load automatically.
[Mark Housel] Maybe for some but certainly not for me.
This should be easily handled by TestStand without any problems. What do you mean by "chaos ensues"?
Certainly Teststand doesn't care a bit how many sequences are open. But, when my sequences open they initialize HW of the ATE associated with
that sequence file during the sequenceFileLoad callback. e.g. I allocate TELNET handles to a terminal
server that connects to multiple console within the system and als for
the UUT.
If a second sequence opens it knows nothing about the other sequence and again tries to open a TELENT session to the same port of the
terminal server and obviously fails, so my sequence reports that it
can't properly initialize the ATE HW. Bad juju!
Are your sequence files set to run automatically when they are loaded?
I guess so. Other than the trick of logging in as the special noExecution user and having special code in my sequence and modified Process Model I have no idea how to prevent a sequence fronm "runnin" when opened.
If you want to prevent Testexec.exe from loading multiple files, you should be able to close out one of the open files when it loads and that sequence file should not load in the future. I hope that helps.
The trick I read somewhere else of modifying the Testexec.uir file to never re-load a sequence file automatically seemes to have covered up solved the problem.
Thanks,
Mark -
Can't prevent unwanted toolbar from loading in Acrobat Pro 9
I downloaded an evaluation copy of EverMap AutoBookmark plug-in. I prefer not to automatically open toolbars that I don't use regularly when first opening Acrobat, but I can't keep the AutoBookmark toolbars from loading, even if I uncheck those particular toolbars. EverMap support claims that it is a problem in Acrobat. I have also had the same issue with a free plug-in from the Acrobat for Legal Professionals site. Plug-ins work fine, but I can't prevent the toolbars from loading on startup.
Anyone else experience this issue?Sometimes it is simplest to simply enter the Acrobat folder and move the plugins that are a problem. Just copy then to a backup so you can put them back when you need them. I think that the presence or absence of the plugins is all that Acrobat needs.
-
Hello all,
I'm currently setting up a Proof Of Concept setup with directory synchronisation and password syncing to Office 365, leveraging AAD Premium for the password reset and password writeback to on premises
AD functionality. Directory Sync + Password Sync is working flawlessly with the AADSync tool. However, upon requesting a password reset for a user, I'm hitting a password writeback error. The webpage states that the password does not meet the password
complexity policy, while it does. I can set that particular password for that account at the on premises AD without any problem.
In the event viewer at the AADSync server, I'm seeing this Error pop up whenever I try to reset the password:
An unexpected error has occurred during a password set operation. "BAIL: MMS(4032): ..\server.cpp(11003): 0x80230619 (A restriction prevents the password from being changed
to the current one specified.) Azure AD Sync 1.0.0475.1202"
My Setup:
Windows Server 2012 AD with a single forest
Seperate domain joined Windows Server 2012 for AADSync tool
AADSync version 1.0.0475.1202 with options password sync, password writeback enabled
Service account for AADSync tool with Replicating Directory Changes and Replicating Directory Changes All permissions
on root AD forest structure with inheritance to all objects. This account also has the permissions to Change Password and Reset Password on all descendant
User Objects.
AAD Premium for my office 365 tenant
AAD Premium licenses for the test users and the office 365 account used to sync to Office 365. This account is also Global Admin.
Could anyone help me with this? Is there something I’m missing here? My guess is that the AAD is not trusted or the service account for AADSync tool does not have the proper permissions. I’ve tried
many options, like setting the AADSync Service account to Enterprise Admin or granting the service account Full Control over that particular user.Concerning my issue:
The Default Group Policy setting: Minimum Password Age is set at 1 day. As I was testing this feature with new users, their provisioned passwords were less than 24 hours old and the Minimum Password Age of 1 prevented the change of the password.
After changing this to 0 days in the Default Group Policy, my password resets started working for newly created users. While this might not have affected existing users in production, it had me looking and searching for permission issues on my AD.
So for those that might be experiencing ADSync Event ID 6329 and PasswordResetService Event ID 33008 Errors when trying to do a Password Reset using AAD Premium with Password Writeback, it might be helpful to check the applied password policy.
The issue is solved. -
@How do you prevent the organizer from mixing the order of pictures when down loading off the memory card?
This sounds like you are using Photoshop Elements, and the Photoshop Elements forum would be best at answering that.
Photoshop Elements
Gene -
Trying to install an upgrade of iTunes on my pc but Error 7 (Windows 193) is preventing the install from going thru. I am logged on as Administrator running windows 8.1 on my pc. I have repaired and uninstalled a couple times These are my warnings
"Service 'Apple Mobile Device Service' ('Apples Mobile Device Service) failed to start. Verify that you have sufficient privilege to start system services." [Abort Retry Ignore ]. "ItunesHelper was not installed correctly "If the above steps haven't helped try installing:
iTunes 12.1.0.71 for Windows (64-bit - for older video cards) - itunes64setup.exe (2015-01-28)
which is a 64-bit installer for a 32-bit core program, similar to previous 64-bit releases of iTunes, or roll back to:
iTunes 12.0.1.26 for Windows (32-bit) - iTunesSetup.exe (2014-10-16)
iTunes 12.0.1.26 for Windows (64-bit) - iTunes64Setup.exe (2014-10-16)
as appropriate.
tt2 -
An error prevents the Change Management Upgrade script from executing
I have Warehouse Builder 10g on a database 10g R1.
On a server linux I have the repository, and on other server (Sun 5.9) I have runtimes for production.
I want execute an upgrade deploy action on one object but I get this error:
An error prevents the Change Management Upgrade script from executing successfully. We strongly advise that this Upgrade is UNDONE and the problem is investigated. Data loss may occur if you accept this Upgrade
Any idea?
Thanks,
Fernando.I review the installation, it was made with a diferent user that database, I get same permission, restart runtimes service and problem was resolved.
Fernando. -
Windows 7 "a patch is preventing the system from starting" error code 0x490
I have a Windows 7 machine.
It was working fine.
Now it will not boot.
When I try system repair, it says:
Root cause found
A patch is preventing the system from starting.
Repair action: System file integrity cheack and repair
Result: Failed. Error code 0x490
I have tried doing safe mode, last known good configuration etc and nothing works
Also, I tried to restore to an early checkpoint, but it claims that none exist, even thought I know we save restore points.
Please advise?"I suggest running Command Prompt from the repair menu and then Check Disk:
1. Insert the Windows 7 Disc and boot from it.
2. In the recovery menu, choose Command Prompt .
3. Type the following command and press Enter:
Chkdsk /r /f
Please also try the following commands and press Enter at the end of each line:
Ren C:\Windows\winsxs\pending.xml pending.old
Ren C:\windows\SoftwareDistribution SDOLD
Regedit.exe
When the register editor opens, please navigate to the following key:
HKEY_LOCAL_MACHINE\COMPONENTS:
* High light the COMPONENTS key. Please check if the following values exist in the right pane:
AdvancedInstallersNeedResolving
PendingXmlIdentifier
* If so, please right click on them and choose Delete them. Confirm the operation.
* Restart the computer."
Quote from : Vivian Xing
http://social.technet.microsoft.com/Forums/en/w7itproinstall/thread/227bcd32-f0dd-4aab-942e-07e0cadec083 -
Prevent iPhone Mail from loading images in HTML e-mails
Hello there!
Is it possible to prevent iPhone Mail from loading images in e-mails?
If yes, where can I change those settings?
Cheers,
ThomasIan, thanks for your quick reply.
I just hope Apple is going to build this feature into one of the next firmware updates, since from my point of view this is not only a security concern, but could turn out quite expensive if you are on a bad price plan. -
Call a method in the view from Component Controller
Hi Friends,
I have written the code for calling the RFC in Component Controller.
My requirement is to change the properties of UI elements in the view, if I get any exception while calling RFC.
Can Call a method in the view from Component Controller.
Regards,
Lakshmi Prasad.HI,
You can get the error message during the exception of calling RFC in view itself.
Any way you may call the RFC at some action in the view only.
Can you explain me what you are trying to do?
Kind Regards,
Mukesh -
How to prevent the browser from executing the old version of js file...
Dear sirs,
I have a JSP page that includes a javascript file as given below,
<script type="text/javascript" src="../scripts/validation.js"></script>
Some times modification is needed in this included script file. After the modification, when I load the JSP page in the browser,
the old copy of the script file, which was not modified is getting executed. by the browser.
I would like to know whether any options are availabe in javascript to prevent the browser from executing the old copy that has already downloaded to the temperary interner folder(from caching)and use the modified version available with the new response...
Thank you,
Sudheesh K SDear sir,
Thakyou very much for your comment.
I tried this, By doing thisThe .html page of the response will be deleted. But the javascript file will not be removed. It will be remail there.
This lead me to the idea to think about javascript. I heard that some commands are there in javascript like cache ="NO" but not sure. I searched in the net but no favourable result found...
Thank you,
Sudheesh.... -
How do i prevent the user from entering a RETURN/ENTER key into their username?
Hello,
i am currently trying to make a login system where the
username will obviously enter their username.
I have made my user input box editable and set up variables
to accept the user input and store them into variables, along with
error prevention for blank fields.
However i cannot prevent the user from hitting the
"enter"/"return" key. When i hit "enter" the user input box box
gets larger as the type curser moves onto the next line and when
the username is stored in a variable it is stored as "theuser
RETURN" so when variable is passed to the next frame and is
recalled by another text box to display the username, the user name
has a carriage return.
I want to prevent this, anyone got any suggestions? or know
of any websites i can visit which will explain this to me nicely??
Thank yousuggestion:
don't make the edit field editable right from the start.
rather attach a behaviour to the field/text-sprite like:
property mySprite, myMember
on beginsprite me
Sprite = me.spritenum
-- this is the channel-number of the editbox
myMember = mySprite.member.number
-- this is the field/text-member
member(myMember).editable = FALSE
end beginsprite
on mouseup me
-- when i get clicked for editing, then set me editable
member(mymember).editable = TRUE
the keydownscript = "MyKeyhandler"
-- this sets the keyhandler to YOUR keyhandler, see below
end mouseup
You would then need to have YOUR keyhandler in any mociesript
and there you
would block any unwished key, while editing
on MyKeyhandler
case the key of
RETURN:
stopevent;
otherwise
pass;
end case
end MyKeyhandler
in the end you would attach a behaviour to any
"Submit"-button (this is the
one that "gets" the userinput" and performs further action
according to your
wishes and decisions)
on mouseup
the keydownscript = EMPTY
-- this resets to normal
user-ID = member("Whatever the number or name of your
editfield
is").text
member("Whatever the number or name of your editfield
is").editable
= FALSE
-- any further actions to make in your project
-- to get along with the entered User-ID
end mouseup
something like this, I guess
Peter -
EVDRE encountered error retrieving the data from web Server
Hi,
I know this is the common/generic error message, following is our scenario:
We installed BPC NW 7.5 on our production box and configured F5 load balancing for two .NET servers.
We are getting the error "EVDRE encountered error retrieving the data from web Server"when we run the report EVDRE on APSHELL (original Appset). This is the fresh installation:
The workaround "Clear Local application information". Even this works only sometimes.
Is there anything else we should have configured on using two .NET servers?
Please suggest.
Thankshi Nagesh sorry for the delayed reply..
We changed some of the parameters at F5 switch like sticky time, timeout..
And the MDXPARSER connection to one of out application server was failling, thats why we did not had this issue consistently.
When ever the request goes to that app server fails. It took a lot effort to notice this since we were assuming the F5 switch was only causing the issue.
Thanks -
Inequality condition prevents the optimizer from selecting indices on tabl
Dear all,
I have the below query which takes 4 minutes to give the output:
original query
select t_sub.contrno "contNo" from tsk_subno t_sub ,arm_subs_balance bal where order_no = '5360' and
order_type='NET' and t_sub.subno = bal.subno (+);sql tuning advisor is giving the below advise.. Restructure SQL
Predicate NVL("IVM_BILLING"."BILLED",'N')<>'Y' used at line ID 14 of the execution plan is an inequality condition on indexed column "SYS_NC00071$". This inequality condition prevents the optimizer from selecting indices on table "TABS"."IVM_BILLING".How I can restructure the sql..
FYI. arm_subs_balance is a view which takes data from IVM_BILLING.
view script :
CREATE OR REPLACE VIEW ARM_SUBS_BALANCE
(CONTRNO, SUBNO, PAST_DUE, DEPOSIT, UNBILLED,
TOTAL)
AS
SELECT contrno,subno,sum(past_due) past_due,sum(deposit) deposit,
sum(unbilled) unbilled,
sum(past_due+deposit+unbilled) total
from
select subno,0 past_due,0 deposit,0 unbilled,contrno
from CRM_USER_INFO
union all
select nvl(H.subno,'0000000') subno, sum(nvl(R.ar_am_loc,0)) past_due,
0 deposit,0 unbilled, R.contrno
from IVM_INVOICE_DETAIL R, IVM_INVOICE_RECORD H
WHERE R.AR_REF=H.AR_REF
and R.contrno = H.contrno
group by nvl(H.subno,'0000000'),R.contrno
having sum(nvl(R.ar_am_loc,0)) != 0
union all
select subno,0 past_due,nvl(add_deposit,0) depoist,
0 unbilled, contrno
from CRM_USER_EQUIPMENTS
union all
select subno,0 past_due,0 deposit, nvl(billamount,0) unbilled,
contrno
from IVM_BILLING
where nvl(billed,'N') != 'Y'
group by subno,contrnoThanks
Kai
Edited by: KaiS on Sep 30, 2009 10:10 AMJustin,
I always thought that nvl(billed,'N') != 'Y' meant that the query should include all rows with a null-value or a value other than Y. :p
But I agree that the index would moste likely not be that helpfull, but we need more information for that: [When your query takes too long|http://forums.oracle.com/forums/thread.jspa?messageID=1812597] and [HOW TO: Post a SQL statement tuning request |http://forums.oracle.com/forums/thread.jspa?threadID=863295]
I expect that the conditions on tsk_subno will result in a small number of rows and that there's an index on tsk_subno.order_no which will be used to retrieve those rows.
In that case view arm_subs_balance will be accessed on subno. This means that if the tables crm_user_info, crm_user_equipments and ivm_billing have indexes on subno, those indexes will be used, but an index on ivm_invoice_record.subno will not be used because of select nvl(H.subno,'0000000') subnoWithout more information I would guess that this part of the union takes longest and should be tuned by rethinking/redesigning the view or a function based index: create index i on IVM_INVOICE_RECORD ( nvl(H.subno,'0000000') ); -
How to prevent recalcitrant programs from loading
After a reboot I have one program that continues to load at start-up even after I am sure it is 1) not in the "login Items" window in preferences, 2) is not set to "open at login," and 3) I have quit the program before re-boot. Can anyone tell me what else I can do to prevent the program from opening at login. I am set as current (and only) user and adminstrator. I have searched Library for clues, but found none.
Thanks,
Fred Wolfe...now that i've found it, i'd have to agree with the
last thread's advice to not worry about it, except
for one exception: when my app is executed, it checks
for a settings file. if not present, it initiates
these settings (asks the user to setup a password,
etc). if a second instance were loaded, the potential
exists, depending on which instance were closed
first, for the user to unknowingly save over their
initial program setup.
any suggestions for getting around that?
Perhaps you can create the settings file as a place holder when the program detects that it isn't there, either empty or with default values. Get the user input and overwrite the place holding file.
Subsequent executions, or a second execution on the same desktop, "see" the settings file exists and skip that portion.
Maybe you are looking for
-
All of my apple sets (iphone, ipad and computer) cannot connect the app store since yesterday, what's wrong with the app store? do you know? or do you have have the same experience?
-
Photoshop CS5 tools not working
Ok, I have taken a two classes at the University level previously, although I am quite rusty, but I haves watched no less than 10 tutorials today. I can't seem to get the basic functions to work right. Most importantly, I can't get the mask layer to
-
How to Use Acrobat SDK for Automation Using VB or Perl
Hi Forum, I am a new bie, just 2 days old to acrobat and javascript, and I am basically a perl developer I am using Adobe Acrobat 9 Pro, I downloaded Acrobat SDK, but i don't know what else to do further, how to use?? I tried to start learning SDK, b
-
Use Webservice instead of RFC for HR-FI Integration Scenario
Hello there is an ALE Scenario to integrate HR and a FInance System on different servers. This works nicely with direct RFC Calls/Connections or even with PI and RFC Adapter. we want to use PI and Enterprise-Services/Webservices/Proxies instead of RF
-
Don't want ipad apps on iphone
How do I keep my ipad and iphone apps separate? When I add an app to my ipad it shows up on my phone as well.