An installer that is as light as possible

I finished a driver (made with LV 8.6.1) to the PLC LOGO! (of Siemens). It application communicate through the serial port.
My question 1 is:
How to create an installer that is as light as possible?, because when it is created, it weighs 120MB.
The question is because I think distribute it via Internet.
My question 1 is:
If I am distribute only the executable, What run time should be downloaded by users? Obviously apart from the LabVIEW run-time-engine.
There is an installer for VISA run time engine?, which only contains the drivers for the serial port.
Carlos Calderón Córdova, Ing.
Universidad Técnica Particular de Loja
Grupo de Control, Automatización y Robótica
Escuela de Electrónica y Telecomunicaciones
Phone: (+593) 7-2570275 ext. 2650
Cell: 098663798

Yes, there is an installer for the VISA run-time. This is the same run-time you probably have selected in the installer for your LabVIEW project. No, there is no option for a serial only run-time. If there was, you would see this in the project for LabVIEW project. This was an option only for LabVIEW 7.1 or older.

Similar Messages

  • Are there installations that do not require an Administrator Password?

    I just installed the Camino web browser onto Leopard. I was suprised when Leopard did not ask for an Admin Password when installing it. I then simply downloaded another program and was able to install it without the Admin prompt. Leopard DID let me know that it was downloaded from the internet and if I "wanted to run it" but it just did not ask for the Admin stuff. Are there programs that Leopard does not ask Passwords for? If so, what is the criteria where it asks for a password?
    Thanks for your help.

    Some installers will work fine even if you don't provide an admin password. Apple officially recommends that application installers require an admin password. This gives that installer, software, and software developer complete control over your machine. Many application will work fine just with a drag-and-drop installer, but such installers are no longer recommended by Apple. It is possible to construct an installer that does not require an admin password but few people do it, and for good reason. The installer is a flaky beast at best and a smart developer doesn't want to take risks with it like that. So, the answer to your question is that the criteria is just that "Apple says so".
    Sorry if this doesn't make much sense. It is mostly a rant. I don't like the admin password requirement at all. I really don't like the recent recommendation of using the Apple installer for all applications. It is a safe bet that you will see fewer and fewer drag-and-drop installations in the future. Pretty much all installers will require your admin password. Pay attention to what they are installing because they can literally do whatever they want and wreak havoc with your system the next time you update your system.

  • How do I create installer that checks the available Run Time Engine on the target system

    Hi,
    I am looking for a soultion on custom Installer where this Installer once done with the Installation should be capable of checking the presence of Runtime Engine on the target system. I amaware of including/checking the LV RTE checkbox for such options and we are working on some other concept. The thing is we would like to give the user a pop-up or any message that shows the presence of Runtime engine on the target system after finishing the installation. In case the runtime engine is not already installed on the target system, this time the message will be for the link to get the .exe and close the installation. 
    Overall we would like to minimize the size of our Installer that in case will get increased if we include Run Time Engine along with the Installer. 
    I am also assuming that such checking can be done through Advanced Tab in the Installer properties by including any such .exe for performing those things but looking for more options if possible to get it done. 
    Please do let me know if someone has any idea about it. 
    Thnaks in Advance,
    Vivek

    Hi teststand,
    you can start another program which checks if the rte is available. It should also be possible with only a batch file.
    Mike

  • Can I make an installer that already has certain addons installed?

    Hello,
    I'm wondering if it's possible to create an installer for Firefox that I can use when I start to customize a new system to make the process faster and easier. Specifically, I'd like to know if it's possible to create an installer that automatically installs certain add ons and extensions with the regular install process of Firefox. Ideally, I'd like a single installer that will install Firefox, already containing Flash, AdBlock Plus, Personas, a persona, Unity, etc. Is there a way to do this, or do I have to install them all as separate instances? I want this because I do a lot of work on friends and family member's computers and I want to make the install process of the basic tools I use as painless and fast as possible. The package of tools would include a Firefox that has this collection of add ons, Daemon tools, 7zip, and other general utilities. If someone could offer some guidance on this, I would greatly appreciate it.

    I believe you can do this with the Build your own browser program - https://byob.mozilla.com

  • I have just got an Airport time Capsule for back up how do I do it? Do I put the ethernet cable into the back of my sky hub because when I do that the amber light on my Time Capsule flashes amber. Please talk in simple terms as I am a

    I have just got an Apple Airport time capsule to back up my one year old iMac......how do I do it? I have tried putting an ethernet cable into the time capsule and to my sky hub, all I get is a flashing amber light, can anyone help I am a silver surfer not used to Apple products, but love them, plus I don't understand half of the jargon....HELP please

    Apple's Setup Guide for the Time Capsule is pretty simple and clear for most users, and you don't indicate at what point or step that you are getting stuck.
    So, please go to page 8 in your Setup Guide to review the topic of Plugging In Your AirPort Time Capsule.
    The Sky hub will likely have 4 Ethernet <--> ports on the back of the device. Pick any one that you want and connect one end of the Ethernet cable to the port that you choose.
    Then, connect the other end of the Ethernet cable to the WAN (circle of dots) port as shown in the Setup Guide.
    Continuing with the instructions on page 8 of the Setup Guide, power up the Time Capsule by connecting the power cord from the back of the Time Capsule to a wall AC jack.
    Note that the instructions indicate that the indicator light will be solid amber during startup, and it will change to blinking amber during the setup. The light will remain blinking amber until you have configured the Time Capsule at which time the light will turn green.
    Next, go to page 12 of the Setup Guide to see the information to Use your Mac or iOS device to set up your AirPort Time Capsule.
    You indicated in your tag line that you were using OS X Mountain Lion (10.8.3), and since that will exceed the minimum requirement of a Mac using OS X (10.7.5) as noted in the guide, you can use your Mac to set up the Time Capsule.
    Continuing with the instructions on page 12 of the Setup Guide......
    1. Open AirPort Utility on your Mac.  It is located as follows:  Finder (the smiley face on the dock) > Applications > Utilities > AirPort Utility
    2. Select your AirPort Time Capsule and click Continue. You won't be able to do this, but read further......If you do not see the AirPort Time Capsule that you want to configure, choose it from the WiFi status menu in the menu bar, at the top of the screen.
    So, clicking on the WiFi icon will yield a small window that looks like this:
    The example below shows an AirPort Extreme.  You will see Time Capsule on your screen. Click on Time Capsule.
    When you click on Time Capsule, that will get the setup wizard going. it will take a minute to analyze the network, then display a screen that looks similar to the illustration below, except that you will see a picture of a Time Capsule on your screen
    3. Continuing with the Setup Guide.......Follow the onscreen prompts to create a new network
    Network Name...........Type in a simple name that you want to call your network. Do not use the suggested name.
    Base Station Name....Type in a simple name that you want to call the Time Capsule.  Mine is TC, for example.
    Password...................Type in a password that will be used for both the network and the Time Capsule.  Write that down.
    Verify..........................Type in the password again to Verify
    Click Next
    The setup wizard will configure everything for you. When you see the message of Setup  Complete, click Done.
    The Time Capsule is now set up and it will display a green light.

  • I just got my replacement phone from Warranty. The phone was on for just 2 hours and it crashed. I was told that motorola knows about this "possible" issue. I got a new sim, hard reset, If it can be done I did it. They are now sending me the same phone ag

    I just got my replacement phone from Warranty. The phone was on for just 2 hours and it crashed. I was told that motorola knows about this "possible" issue. I got a new sim, hard reset, If it can be done I did it. They are now sending me the same phone again. Number 3. I would hope this one doesn't crash but I rather have a different phone so I can enjoy using my account. The phone's most recent error was today. " Unfortunately, the process com.motorola.widget.circlewidget3d" has stopped. At least the error message works and it's polite. I told tech this and they could not answer my question or help me other then "let's do a hard reset" My warranty replacement is coming on Monday. Let's hope this one works. Anyone else havinbg the same problem. it says "such and such as stop working" on all sorts of stuff! Help! I want my iPhone Back!

    I just did a google search on this issue. OMG, I got a ton of videos on this or similar issues. Each one says in some way to clear the cache, reset the data, etc. Why in the world would this continue to happen and they not do a fix that resloves this without having to lose or stop what your doing. This is a very long and constant issue it seems with Android phones as there must have been pages and pages of what I now call "Unfortunately"  So I am going to pray that Verizon helps me  out and gets me away from this issue and helps me go back to iPhone or try the Samsung.

  • I would like to extend the screen from my circa 2013 27in iMAC with thunderbolt onto my circa late 2006 imac using the DVI port on that iMAC. Is this possible? If not is there another approach I can use?

    I would like to extend the screen from my circa 2013 27in iMAC with thunderbolt onto my circa late 2006 imac using the DVI port on that iMAC. Is this possible? If not is there another approach I can use? My 2006 iMAC is showing it's age but I figure I can use it as just a monitor just fine. Assuming I can connect the two together.

    That older iMac isn't designed to receive video input through the mini-DVI connection. Only certain newer iMacs are able to be used as displays.
    Your only options are to use something like ScreenRecycler mentioned above.
    ~Lyssa

  • Good evening I would please help me, IGood evening I would please help me, I have problems with flash player when update on my computer Flash Player for windows 8, gives me error in the installation that is not apply on my computer. Please help. Thank You

    Good evening I would please help me, IGood evening I would please help me, I have problems with flash player when update on my computer Flash Player for windows 8, gives me error in the installation that is not apply on my computer. Please help. Thank You

    First, confirm that ActiveX Filtering is configured to allow Flash content:
    https://forums.adobe.com/thread/867968
    Internet Explorer 11 introduces a number of changes both to how the browser identifies itself to remote web servers, and to how it processes JavaScript intended to target behaviors specific to Internet Explorer. Unfortunately, this means that content on some sites will be broken until the content provider changes their site to conform to the new development approach required by modern versions of IE.
    You can try to work around these issues by using Compatibility View:
    http://windows.microsoft.com/en-us/internet-explorer/use-compatibility-view#ie=ie-11
    If that is too inconvenient, using Google Chrome may be a preferable alternative.

  • I want the phone to be on sense that is my alarm clock but don't need the lights on the phone and the dim light button will only do that dim the light.

    I want the phone to be on sense that is my alarm clock but don't need the
    lights on the phone and the dim light button will only do that dim the
    light.

    Restoring iOS software
    http://support.apple.com/kb/ht1414
     Cheers, Tom

  • I want a quiet drive that does not light up the room

    I need a quiet drive that does no light up the room. I use my imac as a media center and the last thing I want is a blue light lighting up the room.
    Many have recommended the drives from OWC as quiet, but they have the blue light.
    What about the ones from Lacie, Western Digital or any other recommendations?
    iMac Intel 2 ghz 20 inch   Mac OS X (10.4.8)   512 ram

    WD My Book Pro.....does have the obligatory blue light.....but remains relativley dull if you do not install the Button Manager software.....which I didn't.
    Quiet and fast.
    Cheers
    imac 24" 2GB/Black Macbook/G4 MDD 1.42   Mac OS X (10.4.9)  

  • I do not accept messages from 17 hours to 23 11/09/12 12/09/12 hours of the year. For the above period I have no messages. Please let that happen. Is it possible to recover lost messages?

    Good time.
    I do not accept messages from 17 hours to 23 11/09/12 12/09/12 hours of the year.
    Go through the iCloud in the mail, I also could not in the period.
    I sent a few reports of problems to iCloud.
    Now everything is restored. Thank you.
    I use several devices: PC Win 7 and iPad OS 5.1.
    The problem stalknulsya on both devices.
    However, during the above period I have no messages.
    Please let that happen. Is it possible to recover lost messages?
    Thank you

    Hi finecut,
    I believe this Mac Mail Help info may help:
    Backing up your mail
    You can back up your mailboxes to a CD or another disk. To do this, you can either copy the Mail folder in your Library folder or create an mbox file, a common format for storing mail messages.
    ▪ To save the contents of all your mailboxes, hold down the Option key and drag the Mail folder to your desktop or to another disk. The Mail folder is in the Library folder in your home folder (~/Library/Mail).
    Copying the Mail folder only backs up mail from POP accounts, or mail from an IMAP account that you've copied to On My Mac. When you are ready to restore the Mail folder, choose File > Import Mailboxes, select Mail for Mac OS X, and locate the Mail folder.
    ▪ To create an mbox copy of a mailbox, drag the mailbox from the mailbox list to your desktop.
    ▪ To create an mbox file with just some of your messages, select the messages, then choose File > Save As. In the Format pop-up menu, choose Raw Message Source, then enter a name and save the file.
    You can copy mbox files to CDs or to other disks. When you want to restore your mail, choose File > Import Mailboxes, select "Standard mbox files," and locate the files.
    hope that helps,
    littleshoulders

  • Upgrading Installations that use Standby Databases

    I have applied patch 6810189 and upgraded Oracle10g Database on my local machine, Now I am planing to apply it on test machine for that I need additional steps for upgrading Physical Standby database as said in README.html of p6810189_10204_Win32.zip
    *7.1.2 Upgrading Installations that use Physical or Logical Standby Databases*
    For information about physical standby databases, review document 278641.1.
    Can anybody forward me this document or any suggestions for upgrading physical standby database..
    THanks.

    thanks :)
    but I am looking for complete steps, starting from applying patch to production then at standby database.... etc..etc

  • I have a debit card but would like to download apps from the store. how do I do that? I can't possibly get a credit card just for this. please help.

    Hi,
    I have an iTouch. I'd like to download some free apps. but I have a debit card but would like to download apps from the store. how do I do that? I can't possibly get a credit card just for this. please help.

    I really do not think it is the iPad or your network connection. Other users have reported this very same issue. Try this and see if it works for you - it may not work - but it's easy to try - harmless - and it has worked in the past for others.
    Try signing out of your account and restart your iPad.
    Go to Settings>Store>Apple ID and tap the ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button. Go back to Settings>Store> Apple ID and sign in again.

  • Hi Anyone had a dark screen that won't light up?

    Hi Anyone had a dark screen that won't light up butyou can vaguely see the ipod image?

    Try the standard fixes:
    - Reset:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Restore from backup via iTunes
    - Restore to factoery defaults/new iPod
    - If still a problem you likely have a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • Am trying to download itunes as it has previously deleted during an update, and it comes up during the installation that there is a file error with my resources

    Am trying to download itunes as it has previously deleted during an update, and it comes up during the installation that there is a file error with my resources

    That's perfect, thanks.
    error writing to file: C:\Program
    files\ i tunes\ i tunes.Resources\ja.lproj\AppleTVStream
    itxib. Verify that you have access to that directory
    That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
    XP instructions in the following document: How to perform disk error checking in Windows XP
    Vista instructions in the following document: Check your hard disk for errors
    Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
    Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
    Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

Maybe you are looking for