An interesting search problem

How would you be able to do this:
You would have a photo that has the tag cat+chair.
It would come up if you were to search "cat", "cat chair", or "chair cat" but not "chair". How could you do that?

Let's say I have an array of strings:
strings[0] = "animal cat(1).jpg";
strings[1] = "animal cat(2).jpg";
strings[2] = "animal cat ~chair(1).jpg";
strings[3] = "animal cat ~chair(2).jpg";
strings[4] = "animal cat ~patio(1).jpg";
strings[5] = "animal cat ~patio(2).jpg";
strings[6] = "catterpillar.jpg";
The engine would have to ignore all the characters after the first "(" or last ".".
For example if I were to search "animal" or "cat", all should be brought up except 6.
If I searched "cat chair" or "chair cat", only index 2 and 3 should be brought up.
If I search "chair" or "patio", none should be brought up.
Basically, if one of the words with the "\~" matches, the entry should only be brought up if another word without the "\~" matches too.

Similar Messages

  • Outlook 2010, Exchange 2010 - Searching Problems

    Anyone out there able to help with some searching problems some of our users have been seeing?
    Searching in OWA works fine but some people have problems when searching for older emails in Outlook. We've rebuilt Outlook profiles, rebuilt the windows index's (which seems to work but only temporarily). If there's a way to schedule the Windows index to
    rebuild every night or once  week, I'd be very happy to test that out but haven't been able to figure out how to do that.
    Anyone have any other ideas?

    Hi,
    It seems something keeps corrupting the index... Run Anti-virus program and Malicious Software Removal Tool to scan your system, check if there's any virus or malware that may cause the index issue.
    If this issue persists, please also go to File tab ->
    Options -> Search -> Indexing Options
    -> Advanced -> Click Troubleshoot search and indexing, to do some troubleshooting steps to find the possible cause.
    I hope this helps.
    Regards,
    Melon Chen
    TechNet Community Support

  • Small but interesting networking problem

    Hi all,
    This is a small, but quite interesting networking problem, I'd like to get solved.
    The network situation is as follows:
    - A Netgear Router with WLAN
    - A Powerbook G4 with Tiger and both Ethernet and AP connection
    - A Powerbook Pismo with MacOS 9.01. and a wireless Ethernet Bridge
    - A IMac with Panther and AP connection
    - A PowerMac 4400/200 with MacOS 8.6 and Ethernet connection
    All Macs are able to access Internet via DSL.
    The PBs and the IMac can access each other's HDs omnidirectional.
    And here's the problem:
    The 4400 can access the G4-HD, but the G4 can't access the 4400.
    By the way, the 4400 is simply used to adress a printer, but doesn't work as print server by today's meaning. I just transfer files and get it printed from the 4400.
    (Yes, I could buy a cheap printer for each of the other Macs or even a network printer, but don't want to do so because of my very low printing volume
    IMO, my small problem is related to MacOS 8.6, but I've no idea how to deal with.
    So, this is a real nice Mac nut for the wise guys
    Thanks,
    Sven

    RE: Which Mac can be a File Server under what circumstances:
    To make way for the upcoming Intel Macs, AppleTalk and TCP/IP drivers for 10.4 were modified.
    File Sharing via AppleTalk:
    7.5.3 through 10.3 can share their files via AppleTalk.
    10.4 cannot share its files via AppleTalk, and cannot mount drives from Macs that only want to share via AppleTalk. (AppleTalk printing in 10.4 is still supported.)
    File Sharing via TCP/IP:
    OS 9 and later can share its files via TCP/IP.
    7.5.3 and later can mount other Mac's files on its desktop via TCP/IP if you use the "Server IP Address" button in the AppleShare Chooser Extension.
    There is a third-party solution for 7.5.3 through 8.6, but it is not free.
    http://www.opendoor.com/shareway/
    Executive Summary:
    The scenario that always works is to start from the older, pre-9 Mac, and mount the 10.4 Mac's shared drives or shared folder on the older Mac by using the "Server IP Address" button in the Chooser.
    The relevant (but very dense) article is this one:
    301183- Mac OS X 10.4 Tiger: "Connection failed" error when connecting to an AFP server
    The 10.4.9 problem was an error introduced in the 10.4.9 update. I do not believe Apple intended it to stop working with that update.

  • Database Search Problem

    Hey,
    I am creating a database with a user profile, where a user can select their interests.
    i.e
    Golfing Yes/No
    Movies Yes/No
    Travelling Yes/No
    So, there are 20 interests like that, and each of them is a boolean.
    Would it be inefficient to create 20 boolean fields like that ?
    I kinda thought that would be inefficient (not sure if it's true) and thought of a way to put it into the database as a BYTE(20) stream, like
    1001010001011, where 1-yes, 0-no.
    However the problem is.. what if I want to do a search where only the first question is yes, and all the other does not matter ?
    For example.
    I want to search for a string like 1????????????, where ? could be 0 or 1.
    So here are my 2 questions:
    Will I need to traverse the whole database that way ? (use BYTE(20))
    or should I just code them as 20 separate booleans ?
    thanks !
    Dennis

    G'day DennisMV,
    I'd suggest 20 separate booleans. It may take some more space (however these are booleans, so the space would be extremely small!) . But it will save you alot of time writing code that you don't really need to. Also, hunting down small, sinister, evil bugs would be alot tougher using the stream. That's the direction i'd head in anyway.
    Good Luck,
    TimmyP

  • "Exact Search" problems (still)

    Saw a post about a month ago indicating that "Exact Search" returns non-revelant items.
    It still has a problem.
    When searching for (example) "scripting additions", hits include anything with only the word scripting,
    anything with only the word additions,
    anything with the words scripting additions,
    and anything that has (double quotes)scripting, or
    additions(double quotes).
    And here's another "hit"
    !!! I know that's a trite word to use but I can't contain my excitement. I did a Google search for "invisible" and "AppleScript" and after going through 10 pages of links, I concluded that it couldn't ...
    Hardly a hit...
    Bob
    IMac G5, Powerbook G4 Mac OS X (10.3.9) 1.25Gb Ram, 250Gb Hd and 60Gb Hd, BT, AE, and a partridge in a pear tree...

    Hi Tom,
    Veeerrry Interesting (as Artie Johnson used to say)...
    This morning as I am attempting to give you an example, I find that the search seems to be functioning as it should... Could I have been tired last night? (I was, but not that tired!)
    All the exact searches returned info that I would have expected...although I do see that information not relevant to the search is sometimes highlighted in yellow in the initial search result window (quotes, or single words of the phrase being searched for):
    Searching for "Applescript Folder", one of the hits was:
    RE: One touch Internet connecting
    Posted on: Nov 1, 2005 9:10 PM, by user: Niel -- Relevance: 41%
    your /Applications/AppleScript folder, and paste the following into the window: tell application "Internet Connect" connect as user "username" to telephone number "phone number" with password "password"
    Every double quote in the above hit is highlighted. If the actual word "Applescript Folder" had not been in the first two lines of the hit, it would make this hit look bogus (only quotes found)...
    Bob...
    http://discussions.apple.com/search.jspa?threadID=&q=%22applescript+folder%22&ob jID=&dateRange=last90days&userID=&numResults=15&rankBy=10001

  • Strange 'Entire Message' search problems on cloned external drive only

    Hello,
    I'm having some strange problems with the 'Entire Message' spotlight style search function in Mail.
    There are various threads on the forums about a similar problem, as can be found here:
    http://discussions.apple.com/thread.jspa?messageID=9450686#9450686
    http://discussions.apple.com/message.jspa?messageID=7286254
    http://discussions.apple.com/message.jspa?messageID=7540966
    However, here's the twist – it works perfectly fine on my computer, a late 2006 MBP with Tiger, but the 'Entire Message' search ONLY doesn't work when booting from the external hard drive, which is an EXACT clone using smart copy with super duper. Everything else works fine!
    To give an example, when I type in a client's second name in Mail on my computer's HD, with 'Entire Message' enabled 400+ emails appear, when I type it in when booting from the external HD clone there was around 10 emails on the first attempt (whilst Mail was open at the same time) and there were 0 on my second clone attempt, whilst Mail and all other applications were closed. Enabling 'From' and 'To' works fine, just not the 'Entire Message' search.
    I really need this critical function to work, as I'm about to loose my old computer and use it on a daily bases.
    So any ideas anyone?
    TIA
    Message was edited by: Scottishengineer

    ...
    There's an interesting thread there:
    http://discussions.apple.com/thread.jspa?threadID=1366101
    down at the bottom there's this post by the bryceman, that sums it all up for people that don't want to fiddle around with the Terminal:
    +"Thanks Julien, that Launch Services put me in the right direction too and now my Leopard Mail Entire Message Search is FIXED!!!+
    +My Original Post is here:+
    +http://discussions.apple.com/thread.jspa?messageID=7462907#7462907+
    +Posted by: DaveC+
    +This is a known issue. Check out:+
    +http://www.betalogue.com/2008/02/25/mac-os-x-105-tip-repairing-broken-spotlight- searches-in-mail/+
    +http://www.betalogue.com/2008/03/28/mac-os-x-105-broken-spotlight-indexing-for-m ail-messages-caused-by-presence-of-older-mail-application/+
    +Thanks Dave. I went to Betalogue and went through all the posts and I finally found a way to fix the Search Entire Message Spotlight problem in Apple Mail - at least it worked for me. I have been trying to fix this with all sorts of solutions for months and it turns out it was related to a problem with the Launch Services Database. I confirmed this by looking inside my user/library/mail folder and seeing that inside each Mailbox folder, the sub mailboxes all had standard folder icons and not the inbox tray style icons.+
    +Note that you can easily fix this through Terminal Commands, and not all the following steps are completely necessary, but there are many people looking at these threads that want to just push buttons...+
    +== So here are my simple steps to fixing Apple Mail Search ==+
    +1. Attach and turn on any external hard drives you have that may have a copy of Mail.app on them+
    +2. Delete all OLD copies of Mail.app that you can find (don't worry about Time Machine), but make sure you keep the latest version of Mail.app in your working Applications folder.+
    +~ This is so that the LaunchServices database won't easily become corrupt again+
    +3. Install the latest version of Onyx - free to use and download from www.macupdate.com+
    +~ I suggest Onyx, because some people don't want to mess with the Terminal.+
    +4. Quit all open applications and run Onyx (it will want to check your Hard Drive etc...that's OK).+
    +5. Go to the Maintenance pane and then the Rebuild tab and select only the LaunchServices box. Click Execute.+
    +~ This should fix the primary problem with searches+
    +6. When that process finishes, select only the Mail's Envelope Index box. Click Execute.+
    +~ This should fix related problems with other searches+
    +7. When that process finishes, select only the Spotlight Index box. Click Execute. (This process of Rebuilding your Spotlight Index could take hours depending on how big your hard drive is).+
    +~ This will give you a clean fast Spotlight database that Mail uses for Entire Message searches.+
    +8. Quit Onyx+
    +9. Open Mail.app and test your Entire Message Search!+
    ====
    +Hope that helps - it certainly, finally, did for me!+
    Bryce."
    If I was to do this myself, using Onyx that I've downloaded, and as described above, should I do it from the internal on to the clone? The trouble is I have 1 and a half days left with this computer and I need to use the 'Entire Message' search with mail practically that whole time as I'm totaling a large invoice for a client whilst looking at hundreds emails related to them, this is a nightmare.
    Can you recommend me a cloud service that will let me download on to my emergency computer that's an old G4 Powermac with Panther? A tried ADrive and kept on getting the 302 error cod, and tried DriveHQ but it tells me to 'insert the volume related to the file' ............ these seem to work fine when downloading to my intel MBP though ....
    Message was edited by: Scottishengineer

  • List View Web Part Search problem

    We have a problem with the search in the
    List View Web Part (SearchBox).
    If you enter anything in SearchBox
    and the beginning of the search, nothing happens.
    This problem only occurs in non-admins.
    In this case, the browser generates an error:
    "inplview" not defined.

    I have the same problem. I think the problem is related to the Publish feature.
    Any ideas?

  • Google search problem in safari

    I went to do a google search and used the window in Safari. When I hit go, I get results but they look strange. Only the search term and then most of it is blank. It's as if the page is so big that I can't see the rest.  When I go to the bottom of the page it says Mobile, but nothing else. When I tap beside it, it went to a "classic" view as if on the desktop of your computer, but then I could not see what I was typing in the search box. It was invisible. No problem with Bing or Yahoo.
    I also have noticed on a page that I normally check that the login button was not there. I could click where the login button usually is and then it will take me to the page, but what I type is also invisible.
    I have an iPhone 4s 5.1.1. No problems on my husbands iPhone 4s.
    Will try to restore.
    Has this happened to anyone?

    Restore has fixed it.

  • How to fix the search problem due to timezone?

    I live in GMT+8 timzone. I just migrated a site from SP2010 to SP2013. After migrated when I search for a managed property (datetime) all results return is 1 day later.
    To troubleshoot the problem, I setup a new managed property using "Text" datatype. In refinement panel for that managed property I found the refinement are all looks like 2013/12/11 16:00:00. (which should be 2013/12/12 00:00:00)
    The old server is running in GMT+8. The only different is SP2010 and SP2013.I have changed the web application -> general settings -> timezone to GMT+8 and the site collection settings as well. We did not enable "My site" so there
    is no personal regional settings. What else I can check?  What should I check and how can I make the search work as expected?

    Once a document is stored and uploaded it has the UTC time stamp on it. Now this timestamp cannot be changed.
    So you either use timezone when the document was uploaded or use it the same way. 
    BTW what difference does it make with the time it shows?
    The field in question is designed to store a "Date" value only not the "Time". The time is always 00:00:00.
    In the old farm, users search for 2013/12/31 will get the results with field value 2013/12/31. Now in the new farm, with the timezone problem, search for 2013/12/31 will get the results with field value 2014/1/1

  • Search problem with ActiveDirectory - please help

    Hi,
    I've tried to get a list of the users out of the Active Directory.
    But I just can't get my code to work. It returns nothing back.
    The problem should be simple. But I can not figure out why.
    Please help!
    Raymond
    import javax.naming.*;
    import javax.naming.event.*;
    import javax.naming.directory.*;
    import javax.naming.ldap.*;
    import java.util.Hashtable;
    import java.util.Vector;
    import java.util.Enumeration;
    public class AdClient {
    public AdClient() {
    getUsers();
    public static void main(String args[]) {
    Client client = new Client();
    private void getUsers() {
    // domain = utest
    String INITCTX = "com.sun.jndi.ldap.LdapCtxFactory";
    String HOST = "ldap://192.168.128.50:389";
    String SEARCHBASE = "ou=Users,dc=utest,dc=com";
    String FILTER = "cn=*";
    try {
    Hashtable env = new Hashtable();
    env.put(Context.INITIAL_CONTEXT_FACTORY, INITCTX);
    env.put(Context.PROVIDER_URL, HOST);
    env.put(Context.SECURITY_AUTHENTICATION, "simple");
    env.put(Context.SECURITY_PRINCIPAL, "[email protected]");
    env.put(Context.SECURITY_CREDENTIALS,"admin");
    DirContext ctx = new InitialDirContext(env);
    SearchControls constraints = new SearchControls();
    constraints.setSearchScope(SearchControls.SUBTREE_SCOPE);
    NamingEnumeration results;
    // now search for the users
    results = ctx.search(SEARCHBASE, FILTER, constraints);
    while (results.hasMoreElements()) {
    SearchResult sr = (SearchResult)results.nextElement();
    System.out.println(sr.getName());
    ctx.close();
    } catch(Exception e) {
    e.printStackTrace();
    }

    I tried your code...
    There were two issues I saw, when I changed them it worked!
    1) public static void main(String args[]) {
    Client client = new Client();
    should be
    public static void main(String args[]) {
    AdClient client = new AdClient();
    2) String SEARCHBASE = "ou=Users,dc=utest,dc=com";
    env.put(Context.SECURITY_PRINCIPAL, "[email protected]");
    Should be
    String SEARCHBASE = "ou=Users,dc=utest,dc=newcom,dc=com";
    env.put(Context.SECURITY_PRINCIPAL, "[email protected]");

  • RoboHelp HTML 8 Search problem

    I have a single (non-merged) RoboHelp 8 HTML project in which I cannot seem to get Search working correctly.
    I expected to see a box into which I can type a search term and a blank pane below the Contents/Index/Search/Glossary bar where search results would appear.  Instead, I get the following when I generate WebHelp:
    This problem appears in IE 6, IE 7, Firefox 3.0, and Firefox 3.5, all of which our customer base uses.  I'm using RoboHelp 8 on a Windows PC with XP Pro 2002, SP3.
    In the Project Settings/General dialog, I have the default settings for the Stop List and the Always Ignore List selected.  For "Add new keywords to" I have "Index File (HHK)" selected, and "Binary Index" is selected.
    When generating WebHelp, I have the following set:
    General selections:  Under "Additional Options," "Apply to all Topics," "CSS" is selected, with the correct CSS name displayed.  "Add Mark of the Web" is selected.
    Navigation selections:  For Toolbar Buttons, Contents, Index, Search, Glossary are selected.  For Search Options, "Enable Highlight Search Results" is selected.
    Navigation Pane Preferred Format selection is Pure HTML.  (We tried DHTML/HTML but that resulted in an empty nav pane and a nonfunctional index.)
    Optimize Speed For:  Web Site (Internet)
    Publish:  Republish All.
    What are we doing wrong?  I'm totally stumped and I can't seem to find any help on this issue anywhere.  Thanks!

    Hi there
    Please do expound.
    MSMoore9412 wrote:
     I finally succeeded in getting a Search pane that looked right and performed correctly by deselecting the Mark of the Web option.
    To my knowledge this option only affects the output when you view things locally, as in when you are testing the output immediately after generating. Are you saying here that it somehow affected things after you uploaded the files to the server?
    Cheers... Rick
    Helpful and Handy Links
    RoboHelp Wish Form/Bug Reporting Form
    Begin learning RoboHelp HTML 7 or 8 within the day - $24.95!
    Adobe Certified RoboHelp HTML Training
    SorcerStone Blog
    RoboHelp eBooks

  • Numbers search problem

    I have Numbers 08, OX, the search works some of the time but will suddenly quit. The other day I was searching books by a certain author, to compare to a list of her books, trying to figure out which ones I had not read. (yes, I keep a log of the books I have read). For instance, I had searched & found a book, then searched for another, no find. Yet, when I looked at the one before, I see the one I searched for a few lines below. I tried other searches that should have landed on books but nothing happened. I quit Numbers & then checked it again, nada. It is working today...did it just need a reboot of Mac? I really can't imagine software that requires that. Oh yes, there were about 30 books that I searched.
    Thanks for your help in solving my problem in Numbers.

    I have Numbers 08, OX, the search works some of the time but will suddenly quit. The other day I was searching books by a certain author, to compare to a list of her books, trying to figure out which ones I had not read. (yes, I keep a log of the books I have read). For instance, I had searched & found a book, then searched for another, no find. Yet, when I looked at the one before, I see the one I searched for a few lines below. I tried other searches that should have landed on books but nothing happened. I quit Numbers & then checked it again, nada. It is working today...did it just need a reboot of Mac? I really can't imagine software that requires that. Oh yes, there were about 30 books that I searched.
    Thanks for your help in solving my problem in Numbers.

  • Location search problem with iPhone map

    I am posting this to see if anybody else have the same problem, and hopeful a solution as well.
    The problem is that iPhone map started from a 3ird party software does not use my current location by default. For example, I did a search for pizza in google search. The google app will give me a list of local pizza places in their page. But if I click on show all results, it brings up the map app and displays a few pizza places around the world. But shouldn't it give me results in my local area instead? At first, I thought this is a google problem. But I see the same problem later with another voice search app. Have anyone experience this with their iPhone?
    Thanks in advance to any insight on this.

    I've already done it.
    Do you think this will help?
    I doubt that Apple will listen to us. Users with a problem that occurs quite a lot.

  • SQL REPORT BUT SEARCH PROBLEM ON CREATED_ON Column

    Hi Friend,
    i have create SQL Report .
    My Code
    select      CRM_SALES_DEALs.id,
                        "CRM_SALES_CUSTOMERS"."CUSTOMER_NAME" as "CUSTOMER_NAME",
          "CRM_SALES_SALESREPS"."REP_LAST_NAME"||', '||
          "CRM_SALES_SALESREPS"."REP_FIRST_NAME" as "REP_NAME",
           "CRM_SALES_DEALS"."DEAL_CLOSE_DATE" as "DEAL_CLOSE_DATE",
           "CRM_SALES_DEALS"."DEAL_PROBABILITY" as "DEAL_PROBABILITY",
          "CRM_SALES_DEAL_STATUS_CODES"."STATUS_CODE" as "STATUS_CODE" ,
             "CRM_SALES_DEALS"."DEAL_AMOUNT" *
             "CRM_SALES_DEALS"."DEAL_PROBABILITY" / 100 weighted_forecast,
    (select count(*) from CRM_SALES_DEAL_notes where deal_id = "CRM_SALES_DEALS".id) notes,
    (select count(*) from CRM_SALES_DEAL_products where deal_id = "CRM_SALES_DEALS".id) products,
    nvl("CRM_SALES_DEALS".updated_on,"CRM_SALES_DEALS".created_on) last_changed,
    t.territory_name,
    CRM_SALES_DEALS.qtr, "CRM_SALES_DEALS"."CONTACT_NAME" as "CONTACT_NAME"
    from     
    "CRM_SALES_SALESREPS",
    "CRM_SALES_DEAL_STATUS_CODES" ,
    "CRM_SALES_CUSTOMERS",
    "CRM_SALES_DEALS",
    CRM_SALES_territories t
    where  
    CRM_SALES_customers.customer_territory_id = t.id(+) and
    "CRM_SALES_DEALS"."CUSTOMER_ID"="CRM_SALES_CUSTOMERS"."ID"(+)
    and      "CRM_SALES_DEALS"."DEAL_STATUS_CODE_ID"="CRM_SALES_DEAL_STATUS_CODES"."ID"(+)
    and      "CRM_SALES_DEALS"."SALESREP_ID_01"="CRM_SALES_SALESREPS"."ID"(+)
    and (:p1_find is null or instr(upper("CRM_SALES_CUSTOMERS"."CUSTOMER_NAME"),upper(:p1_find))>0 or instr(upper("CRM_SALES_DEALS"."DEAL_NAME"),upper(:p1_find))>0 or
    instr(upper("CRM_SALES_SALESREPS"."REP_FIRST_NAME"||' '||"CRM_SALES_SALESREPS"."REP_LAST_NAME"),upper(:p1_find))>0)
    and
    (nvl(:P1_TERRITORY,0) = 0 or t.id= :P1_TERRITORY)
    and
    (nvl(:P1_ACCOUNT,0) = 0 or "CRM_SALES_CUSTOMERS".id = :P1_ACCOUNT)
    and
    (nvl(:P1_QUARTER,'0') = '0' or CRM_SALES_deals.qtr = :P1_QUARTER)
    and
    nvl(DEAL_PROBABILITY,10) between nvl(:P1_MINIMUM_PROBABILITY,0) and nvl(:P1_MAXIMUM_PROBABILITY,100) or
    instr(upper("CREATED_ON"),upper(nvl(:P1_CREATE_DATE,"CREATED_ON")))My TAble
    CREATE TABLE  "CRM_SALES_DEALS"
       (     "ID" NUMBER,
         "CUSTOMER_ID" NUMBER NOT NULL ENABLE,
         "DEAL_NAME" VARCHAR2(255),
         "DEAL_CLOSE_DATE" DATE NOT NULL ENABLE,
         "DEAL_CLOSE_DATE_ALT" DATE,
         "DEAL_STATUS_CODE_ID" NUMBER,
         "DEAL_CUSTOMER_LOCATION" VARCHAR2(4000),
         "CREATED_BY" VARCHAR2(255),
         "CREATED_ON" DATE,
         "UPDATED_BY" VARCHAR2(255),
         "UPDATED_ON" DATE,
         "QTR" VARCHAR2(8),
         "DEPARTURE_DATE" DATE,
         "DEAL_SOURCE" VARCHAR2(15),
         "ADDRESS1" VARCHAR2(255),
          PRIMARY KEY ("ID") ENABLE
    /i want to search with CREATE_ON Column.
    How can i create code for search in my Quary Code.
    My Item is :P1_CREATE_DATE
    I have try it in last Line in code but it's show me Error.Invalid Relational Operator .
    How can i slove and serch with Created_on Column.
    Thanks
    Edited by: 805629 on Dec 27, 2010 9:13 PM
    Edited by: 805629 on Dec 27, 2010 9:13 PM

    Hi Friends,
    i have sortout this problem.
    Thanks

  • Searching problems when implementing my own repository manager

    Hi there,
    i've serious problems to get the search fuctionality for my own repository manager running. I'm using the 'new', Netweaver-based api.
    Always if I'm launching a search I receive a ClassNotFoundException in the follwing context:
    #1.5#172.16.17.102:7CF6B6:FF73BDDB07:-36E7#1097161124650#com.sapportals.wcm.WcmException#irj#com.sapportals.wcm.WcmException.WcmException(118)#System#0#####System_Thread_37##0#0#Error##Plain###invalid manager class: com.sapportals.wcm.repository.runtime.ManagerAdapter java.lang.ClassCastException: invalid manager class: com.sapportals.wcm.repository.runtime.ManagerAdapter
         at com.sapportals.wcm.repository.RMAdapter.<init>(RMAdapter.java:48)
         at com.sapportals.wcm.repository.runtime.CmSystem.getResourcesImpl(CmSystem.java:1134)
         at com.sapportals.wcm.repository.runtime.CmSystem.getResources(CmSystem.java:356)
         at com.sapportals.wcm.repository.runtime.CmAdapter.getResources(CmAdapter.java:153)
         at com.sapportals.wcm.service.indexmanagement.retrieval.trex.TrexSearchIndexCollection.getSearchResults(TrexSearchIndexCollection.java:1126)
         at com.sapportals.wcm.service.indexmanagement.retrieval.search.SearchSession.getSearchResults(SearchSession.java:293)
         at com.sapportals.wcm.service.indexmanagement.retrieval.search.FederatedSearchSession.getSearchResults(FederatedSearchSession.java:111)
         at com.sapportals.wcm.rendering.collection.SearchRendererStatus.refresh(SearchRendererStatus.java:180)
         at com.sapportals.wcm.rendering.collection.LightCollectionRenderer.createStatus(LightCollectionRenderer.java:718)
         at com.sapportals.wcm.rendering.collection.LightCollectionRenderer.renderAll(LightCollectionRenderer.java:498)
         at com.sapportals.wcm.rendering.control.cm.NeutralControl.render(NeutralControl.java:141)
         at com.sapportals.wcm.rendering.layout.cm.SimpleLayoutController.render(SimpleLayoutController.java:39)
         at com.sapportals.wcm.rendering.control.cm.WdfProxy.render(WdfProxy.java:1229)
         at com.sapportals.wdf.layout.HorizontalLayout.renderControls(HorizontalLayout.java:41)
         at com.sapportals.wdf.stack.Pane.render(Pane.java:153)
         at com.sapportals.wdf.stack.PaneStack.render(PaneStack.java:67)
         at com.sapportals.wdf.layout.HorizontalLayout.renderPanes(HorizontalLayout.java:64)
         at com.sapportals.wdf.stack.Pane.render(Pane.java:156)
         at com.sapportals.wdf.stack.PaneStack.render(PaneStack.java:67)
         at com.sapportals.wdf.layout.HorizontalLayout.renderPanes(HorizontalLayout.java:64)
         at com.sapportals.wdf.stack.Pane.render(Pane.java:156)
         at com.sapportals.wdf.stack.PaneStack.render(PaneStack.java:67)
         at com.sapportals.wdf.layout.HorizontalLayout.renderPanes(HorizontalLayout.java:64)
         at com.sapportals.wdf.stack.Pane.render(Pane.java:156)
         at com.sapportals.wdf.stack.PaneStack.render(PaneStack.java:67)
         at com.sapportals.wdf.ControllerDynPage.executeEvent(ControllerDynPage.java:338)
         at com.sapportals.wdf.BaseDynPage.onWdfEvent(BaseDynPage.java:132)
         at java.lang.reflect.Method.invoke(Native Method)
         at com.sapportals.htmlb.page.DynPage.doProcessCurrentEvent(DynPage.java:172)
         at com.sapportals.htmlb.page.PageProcessor.handleRequest(PageProcessor.java:101)
         at com.sapportals.htmlb.page.PageProcessorServlet.handleRequest(PageProcessorServlet.java:64)
         at com.sapportals.htmlb.page.PageProcessorServlet.doPost(PageProcessorServlet.java:25)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sapportals.wcm.app.servlet.WcmHtmlbBaseServlet.service(WcmHtmlbBaseServlet.java:81)
         at com.sapportals.wcm.portal.proxy.PCProxyServlet.service(PCProxyServlet.java:280)
         at com.sapportals.portal.prt.core.broker.ServletComponentItem$ServletWrapperComponent.doContent(ServletComponentItem.java:110)
         at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
         at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
         at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:301)
         at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:143)
         at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:195)
         at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:209)
         at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:589)
         at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:301)
         at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:143)
         at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:195)
         at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:636)
         at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:209)
         at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:532)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:415)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.inqmy.services.servlets_jsp.server.InvokerServlet.service(InvokerServlet.java:126)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.inqmy.services.servlets_jsp.server.RunServlet.runSerlvet(RunServlet.java:147)
         at com.inqmy.services.servlets_jsp.server.ServletsAndJspImpl.startServlet(ServletsAndJspImpl.java:789)
         at com.inqmy.services.httpserver.server.RequestAnalizer.checkFilename(RequestAnalizer.java:644)
         at com.inqmy.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:305)
         at com.inqmy.services.httpserver.server.Response.handle(Response.java:165)
         at com.inqmy.services.httpserver.server.HttpServerFrame.request(HttpServerFrame.java:1133)
         at com.inqmy.core.service.context.container.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:36)
         at com.inqmy.core.cluster.impl0.ParserRunner.run(ParserRunner.java:35)
         at com.inqmy.core.thread.impl0.ActionObject.run(ActionObject.java:46)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.inqmy.core.thread.impl0.SingleThread.run(SingleThread.java:132)
    I'm using EP 6.0 SP2 directly installed from the CD
    #51 020 549 without explicit installation of any patch or hotfix; the portal itself shows the version number 6.0.2.0.0 (implementation version 6.2.0.0.200310100950).
    I switched on logging but I never reached the INamespaceManager's methods isQueryPropertyNameUnderstood() or getQueryBuilder().
    So I figure that this might a problem of my (too old?) unpatched version of EP6????
    What can I do to get the serach func running?
    Thanks for your support,
    Daniel

    Hi Karsten,
    thanks for your annotation.
    Does it mean that I <b>HAVE TO</b> apply at least Patch 4
    to get the search working or <b>SHOULD</b> I apply the patch to be up-to-date and look for an error in my code???
    Thanx a lot,
    best regards,
    Daniel

Maybe you are looking for