An sample progam how to reterieve values from logical database

i need to reterieve prart, vernr, verna, from the table prps using the logical database psj, i know if i give psj in the logical database of the report attributes, but i should not give in the attributes, but i need to use the logical database.
i need a sample program

Here is the help on the subject.
<i>
Addition 2
... DEFINING DATABASE ldb
Effect
This addition shows that the current program is the database program of the logical database ldb. The name of this logical database has a maximum length of 20 characters. Logical databases are maintained with the tool Logical Database Builder of the ABAP Workbench, in which the framework program is generated automatically including the statement REPORT. The name of the framework program is SAPDBldb.
Example
Introduction of the logical database F1S.
REPORT sapdbf1s DEFINING DATABASE f1s.
</i>
This is leading me to believe that this extension DEFINING DATABASE F1S is used only when actually building the logical database via the LDB Builder, not for use when actually using it in a program. I don't think that you can use this extension in your case.
Regards,
Rich Heilman

Similar Messages

To reterieve value from logical database psj

i need to reterieve value from the logical database psj,
the table name is BPJA1 and the field name is WTJHR, based on the wbs element.

Hi,
assign your prog (attributes) to ldb psj and
try:
GET BPJA1 FIELDS wtjhr. "-> look F1
Andreas

How to read data from Logical Database ADA for more than one financia year

Hi,
I need to read data from ADA logical database and ANLCV node for current financial year 2007 and for the next 3 years 2008, 2009, 2010. When I do this using program attached below, I receive only data for one year, which is entered at the selection screen in the field BERDATUM. How should I modify my program to read ANLCV node for more then one year ? Could anybody help me ?
Kind regards,
Zbigniew Debowski
REPORT ZWRZD075.
NODES: anlav, anlcv.
START-OF-SELECTION.
GET anlav.
WRITE:/ anlav-anln1, ' ', anlav-anln2.
GET anlcv.
WRITE:/ anlcv-kansw, ' ', anlcv-knafa, ' ', anlcv-gjahr.

Hi!
Have you already tried your luck in Java Programming forum?
Regards,
Thomas

Fetching value using Logical Database

Hi
I have some fields in my selection screen apart from the selection screen obtained from my logical database.
Kindly let me know how to fetch data from logical database.
My requirement is this:
I have to select company code from T001 based on entry frm selection screen .
with the obtained company code along with other fields from dynamic selection screen I have to fetch value from Lfb1.
Kindly let me know how to do this
Thanks
Yamini

use f.m LDB_PROCESS....
refer demo program DEMO_LOGICAL_DATABASE

How to load values from database into the f:selectItems value attribute

Hi,
I am trying to load the drop down menu value i.e f:selectItems from the database with a list of values from a column in the databse table. how can i do this? Should i use binding? or is there any other way.
Note:i am able to load values into f:selectItems from the faces-config.xml file but they are static values. i want the values from the database
Please reply with sample codes of faces jsp, bean file and config.xml file

But this is working for me,
JSF
     <h:selectOneMenu value="#{loadbean.grade}" >
          <f:selectItems value="#{loadbean.gradelist}" />
     </h:selectOneMenu>
bean
private String grade;
private List<SelectItem> gradelist;
public String getGrade() {
          return grade;
     public void setGrade(String grade) {
          this.grade = grade;
     public List<SelectItem> getGradelist() {
          return gradelist;
     public void setGradelist(List<String> items) {
          gradelist=new ArrayList<SelectItem>();
          gradelist.add(new SelectItem("daniel"));//this value can be from data base
          gradelist.add(new SelectItem("pspindia"));
          gradelist.add(new SelectItem("prelude sys"));
faces-config.xml
<managed-property>
          <property-name>gradelist</property-name>
          <null-value/>
</managed-property>
this working fine for me. So setter method also works to load value for the h:selectItems
Thanks a lot.

How to retrieve value from xml file

hi all,
can somebody pls tell me how to retrieve value from xml file using SAXParser.
I want to retrieve value of only one tag and have to perform some validation with that value.
it's urgent .
pls help me out
thnx in adv.
ritu

hi shanu,
the pbm is solved, now i m able to access XXX no. in action class & i m able to validate it. The only thing which i want to know is it ok to declare static ArrayList as i have done in this code. i mean will it affect the performance or functionality of the system.
pls have a look at the following code snippet.
public class XMLValidator {
static ArrayList strXXX = new ArrayList();
public void validate(){
factory.setValidating(true);
parser = factory.newSAXParser();
//all factory code is here only
parser.parse(xmlURI, new XMLErrorHandler());
public void setXXX(String pstrXXX){
strUpn.add(pstrXXX);
public ArrayList getXXX(){
return strXXX;
class XMLErrorHandler extends DefaultHandler {
String tagName = "";
String tagValue = "";
String applicationRefNo = "";
String XXXValue ="";
String XXXNo = "";
XMLValidator objXmlValidator = new XMLValidator();
public void startElement(String uri, String name, String qName, Attributes atts) {
tagName = qName;
public void characters(char ch[], int start, int length) {
if ("Reference".equals(tagName)) {
tagValue = new String(ch, start, length).trim();
if (tagValue.length() > 0) {
RefNo = new String(ch, start, length);
if ("XXX".equals(tagName)) {
XXXValue = new String(ch, start, length).trim();
if (XXXValue.length() > 0) {
XXXNo = new String(ch, start, length);
public void endElement(String uri, String localName, String qName) throws SAXException {
if(qName.equalsIgnoreCase("XXX")) {
objXmlValidator.setXXX(XXXNo);
thnx & Regards,
ritu

How to get value from list item

Hi all,
How to get value from list item?
I have a problem with the List Item object
in the Oracle forms.
How can I retrieve the selected item from
a list ?
I didn't find any function like 'list.GET_
SELECTED_ITEM()'...
thanks
Bala

Hello,
You get the value as for any other Forms item:
:value := :block.list_tem ;Francois

How to set Value from Frame to Frame

I am having 2 Frame. Frame A and Frame B. Frame A is having a text Field and a button. When i click on the button on the Frame A, how can pass the value inside the text field of Frame A into a text Field of Frame B which already prepared. Please help !

Hi,
Seems like u r not really undertand my real problem. Below is the details of my probelm.
I have two JFrames in my application . From the first frame when
I click the "Find" Button the second frame is instantiated which
queries for the value to be found . My intention is that when I
click find on the second Frame all other Column values(from the
database) should be dispalyed in the First frame corresponding
to the value I am searching. I am calling the set method in the
first frame from the second frame to dispaly the values in the
first frame. But this is not getting displayed in the first
frame even though i am able to get the result printed in the
console window.
Hope you can be more understand and help me to solve the problem.

How to move value from one tlist to another tlist in same form?

how to move value from one tlist to another tlist in same form on button press?
Same like in data block wizard when we select value from 1st list it will go to 2nd list and can be move back. Please help i am new to forms .
Regards

just call the following proc in your add & add all buttons. Reverse the code for REMOVEs
this proc will move one item at a time from list_item1 to list_item2.
PROCEDURE add_an_item
IS
v_list_count    NUMBER;
v_item1_label VARCHAR2(60);
BEGIN
IF :list_item1 IS NOT NULL THEN v_list_count := nvl(Get_List_Element_Count('list_item1'),0);
      IF v_list_count >= 1 THEN FOR i IN 1..v_list_count
      LOOP
         IF   :list_item1    = Get_List_Element_Value('list_item1', i)
         THEN
              v_item1_label := Get_List_Element_label('list_item1', i);
              Add_List_Element('list_item2',1,v_item_label,:list_item1);
           Delete_List_Element('list_item1',i);
           Exit;
         END IF;
      END LOOP;
       END IF;
   END IF;
END;
*********************************************************************************this proc will move all items from list_item1 to list_item2.
PROCEDURE add_all_items
IS
v_list_count NUMBER;
v_item_label VARCHAR2(60);
v_item_value VARCHAR2(60);
BEGIN
v_list_count := nvl(Get_List_Element_Count('list_item1'),0);
IF    v_list_count = 1 AND Get_List_Element_Value('list_item1', 1) IS NULL THEN NULL;
ELSIF v_list_count >= 1 THEN
       FOR i IN 1..v_list_count
       LOOP
        v_item_value := Get_List_Element_Value('list_item1', i);
        v_item_label := Get_List_Element_label('list_item1', i);
        Add_List_Element('list_item2',i,v_item_label,v_item_value);
       END LOOP;
       clear_list('list_item1');
END IF;
END;I added [ code ] tags to make this easier to read.
Message was edited by:
Jan Carlin

How to read values from DMM4040

Hi,
I am using DMM4040, NI PXI 6509 device.
I need to make some port pins high which i have already done and now i have to read value captured by DMM then i have to make my port pins low if my value is within limits.
Can u suggest me how to read values from DMM and then by notification i ll make my port pins low.
'' A professional is someone who can do his best work when he doesn't feel like it''...........

What language are you using? If using LabVIEW, you use the NI-DMM API to communicate with the 4040. Just take your reading, do your limit comparison, and set your lines based on the comparison results.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

How to pass value from jsp to java bean

I have huge problem . How to pass value from jsp value to java bean.Please replay me soon

Use the <jsp:setProperty> tag. There are several ways to use it. The one you probably want is:
<jsp:setProperty name="bean_name" property="property_name" value="the_value_you_want_to_set"/>

How to get the value from a database without submitting a jsp page

I have a jsp which has a text box depending on the value entered I want to get the value from a database for other two fields with out submitting jsp page. I am using struts.
Thanks For any assistance provided.

Alright,here is an example for you for the first case.
Present.jsp:
============
<html:html>
<head>
<title><html:message key="page.title"/></title>
</head>
<body>
<html:form action="ChangeEvent.do">
<html:hidden property="method"/>

Emp Id:<html:text property="empId" size="5" onkeyup="if(true){this.form.elements[0].value='populateDetails';this.form.submit();}"/>
Emp Name:<html:text property="empName" size="10" />
Email Address:<html:text property="email" size="10" />
<html:submit>Submit</html:submit>
</html:form>
</body>
</html:html>struts-config.xml:
==================
<?xml version="1.0" encoding="ISO-8859-1" ?>
<!DOCTYPE struts-config PUBLIC "-//Apache Software Foundation//DTD Struts Configuration 1.1//EN" "http://jakarta.apache.org/struts/dtds/struts-config_1_1.dtd">
<struts-config>

<form-beans>
<form-bean name="employeeFormBean" type="org.apache.struts.action.DynaActionForm">
   <form-property name="empId" type="java.lang.String"/>
   <form-property name="empName" type="java.lang.String"/>
   <form-property name="email" type="java.lang.String" />
</form-bean>
</form-bean>
<action-mappings>
<action path="/ChangeEvent" type="Test.GetChangeAction" name="employeeFormBean" scope="request" parameter="method">

<forward name="success" path="/Present.jsp"></forward>
<forward name="failed" path="/error.jsp"></forward>
</action>
</action-mappings>
</struts-config>GetChangeAction.java:
=====================
public class GetChangeAction extends DispatchAction{
public ActionForward populateDetails(ActionMapping mapping,ActionForm form, HttpServletRequest request, HttpServletResponse response) throws Exception {
        DynaActionForm dForm = (DynaActionForm)form;
        String empId = dForm.get("empId");
        // calling Model / Db and then getting back Employee Details
        EmployeeBean eb = ModelUtils.getDetails(empId);
        // Updating form bean by updating values from the Model
        dForm.set("empName".eb.getEmpName());
        dForm.set("email".eb.getEmail());
        return mapping.findForward("success");
}well to me this should work regardless to any browser but we need to make sure we put in our logic properly.

How to get values from a stored package variable of type record ?

Sir,
In my JClient form, I need to get values from a database stored package variable of type record. And the values are retained in the JClient form for the whole session. The values are copied only once when the form is started.
What is the best way to do that ?
Thanks
Stephen

Stephen,
not sure what your model is, but if it is Business Components, I think I would expose the properties as a client method on the application module. This way all JClient panels and frames will have access to it. You could use a HashMap to store the data in teh app module.
If JDBC supports the record type, then you should be able to call it via a prepared SQL statement. If not, you may consider writing a PLSQL accessor to your stored procedure that returns something that can be handled.
Steve Muench provides the following examples on his blog page
http://otn.oracle.com/products/jdev/tips/muench/stprocnondbblock/PassUserEnteredValuesToStoredProc.zip
http://otn.oracle.com/products/jdev/tips/muench/multilevelstproc/MultilevelStoredProcExample.zip
Frank

How to retrive data from MYSQL database beginner question

I need to know a method, on how to retrieve values from a MYSQL database. I finally managed to insert data to a MySql database using hibernate, with the help of google. but, i couldn't find any helpful article on google, on retrieving data, will some plzz help me, by directing me to a site that has sample codes ??
i am actually new to MYSql and Databases in java, so plzz do help me, i am lost here,,, :(

Oh, it's Hibernate. In the future, please use the forums at their own site.
Answers on how to use Hibernate are usually available in the excellent "Hibernate Reference Documentation" available here.

How to extract data from oracle database directly in to bi7.0 (net weaver)

how to extract data from oracle database directly in to bi7.0 (net weaver)? is it something do with EDI? can anybody explain me in detail?
Thanks
York

You can use UDConnect to get from Oracle database in to BW
<b>Data Transfer with UD Connect -</b>
http://help.sap.com/saphelp_nw04/helpdata/en/78/ef1441a509064abee6ffd6f38278fd/content.htm
<b>Prerequisites</b>
You have installed the SAP WAS J2EE Engine with BI Java components. You can find more information on this in the SAP BW installation guide on the SAP Service Marketplace at service.sap.com/instguides.
Hope it Helps
Chetan
@CP..

An sample progam how to reterieve values from logical database

Similar Messages

Maybe you are looking for