Anaylyzing capture file for network troubleshooting

We're experiencing a "slow" network report on one of our field sites.  Using SNMP/MRTG I did confirm that the link is being saturated.
Now I'd like to analyze what might be causing the traffic spike.  Unfortunately my router doesn't support NetFlow.  So I used a span port and captured a few minutes worth of traffic.  Now that I've got my .cap file, how do I analyze it?  I have WireShark, which shows me all the packets. But I'd like a summary that tells me:
-Protocol breakdown.  What protocols are using what percentage of the bandwidth
-Top talkers.  What IPs are using the most bandwidth.
I can't seem to find that in wireshark.  Any other opensource tools I could use to analyze my capture file?
Thanks

Thanks.  Top Talkers works as I expected, so thanks for that!
But for the protocol breakdown, the report seems a little odd.  It shows me 49.24% of the traffic is data, but then doesn't really break it down beyond that (nothing adds up to the full 100% of TCP).  See attachment.  Thanks!

Similar Messages

  • Exporting FCP capture files for PC scum....

    HI Ya'll,
    Challenged Montanan back from the south.... (but leaving again).
    My challenge is to send DVD's to my editor in LA la so he can cut a new demo for a presentation coming up in Guatemala.
    Here is what I did:
    Took the capture files (Quicktime) from the Scratch folders and burned them to DVD. Then I checked them on the laptop. Looked great.
    Just got a call from the guy in LA. He has audio but no VIDEO... how ? The extensions are off. and He is on a PC. I'll get more details.
    I paid for him to upgrade from his quicktime to QT Pro --no difference...
    These are HD files and show up great on our time line here. Should this work or did I screw up something???
    Please Help?
    Tim
    The Birdman -Lost on his Migration-- (temporarily)

    At this moment we are still not getting the files open> So here is his system:
    Windows 2000 Service Pack 4
    P4 2.80GH
    1GB Fast Ram
    Seagate 500GB 7200RPM USB2
    Vegas Movie Studio + DVD DV and HDV
    And this is the information Re: Quicktime file--- one example
    White-collarded Seedeater 88.24MB DVCPRO HD 1080i 60, 1280x1080 (1888x1062), Millions
    Video Track: 86.51MB
    Audio: 1.73MB
    Timecode: 4.0MB
    Data Rate: 13.99MB
    Normal Size: 1888x1062 pixels
    Current Size: 960x540 pixels
    Movie FPS: 29.54
    To my knowledge he has not downloaded the Canopus yet.

  • Erased capture files for a video project

    Is there a way to bring those files back from the depths of "Empty Trash" world?

    Hi(Bonjour)!
    If your project is composed of DV material, just recapture your project with original tape(s).
    Michel Boissonneault

  • SCCM 2012 R2: Build and Capture - Windows 8.1 prompting for network

    I have upgraded my SCCM 2012 SP1 (CU2) to SCCM 2012 R2 and I am attempting to Build and Capture Windows 8.1 Enterprise. Everything is perfect except for the OS prompting for a network selection during the process, if I click "next" on that screen
    the Capture finishes without incident. The same is true of the Deploy as well...
    Is this a bug from my upgrade?
    Portland Public Schools / Systems Administrator II

    Hi LillonelC
    Can you point out how and where to do this?
    When capturing with MDT 2013 on VMware I do not see this, naturaly, since the "machine" only has one network adapter.
    But when deploying to a Laptop I get the wireless Setup screen...
    On beforehand Thank You!
    With kind regards
    We aren't using MDT but what we did was create a package called Windows 8.1 - Compnents. In it  placed a file named "32Bit-Unattend.xml" and 1 named "64Bit-Unattend.xml". 
    During the capture in the "Apply Operating System Image" I put a check in the box "Use an unattended or Sysprep answer file for a custom installation". The package was Windows 8.1 - Compnents the File name was "32Bit-Unattend.xml".
    I did the same for 64-bit and used the 64-bit version.
    Here is content of the 32-bit file:
    <?xml version="1.0" encoding="utf-8"?>
    <unattend xmlns="urn:schemas-microsoft-com:unattend">
        <settings pass="oobeSystem">
            <component name="Microsoft-Windows-Shell-Setup" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
                <OOBE>
                    <HideEULAPage>true</HideEULAPage>
                    <HideWirelessSetupInOOBE>true</HideWirelessSetupInOOBE>
                    <NetworkLocation>Work</NetworkLocation>
                    <HideOnlineAccountScreens>true</HideOnlineAccountScreens>
                    <HideOEMRegistrationScreen>true</HideOEMRegistrationScreen>
                    <HideLocalAccountScreen>true</HideLocalAccountScreen>
                </OOBE>
            </component>
        </settings>
        <cpi:offlineImage cpi:source="wim://SERVERNAME/e$/osimages/win_8.1_x86/sources/install.wim#Windows 8.1 Enterprise" xmlns:cpi="urn:schemas-microsoft-com:cpi" />
    </unattend>
    Here is the content of the 64-bit file:
    <?xml version="1.0" encoding="utf-8"?>
    <unattend xmlns="urn:schemas-microsoft-com:unattend">
        <settings pass="oobeSystem">
            <component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
                <OOBE>
                    <HideEULAPage>true</HideEULAPage>
                    <HideWirelessSetupInOOBE>true</HideWirelessSetupInOOBE>
                    <NetworkLocation>Work</NetworkLocation>
                    <HideOnlineAccountScreens>true</HideOnlineAccountScreens>
                    <HideOEMRegistrationScreen>true</HideOEMRegistrationScreen>
                    <HideLocalAccountScreen>true</HideLocalAccountScreen>
                </OOBE>
            </component>
        </settings>
        <cpi:offlineImage cpi:source="wim://SERVERNAME/e$/osimages/win_8.1_x64/sources/install.wim#Windows 8.1 Enterprise" xmlns:cpi="urn:schemas-microsoft-com:cpi" />
    </unattend>
    If that doesn't help I can try to clarify it a bit further.
    PS You won't need to do this for the deploy, only the capture.
    Portland Public Schools / Systems Administrator II

  • Event id related to the removal of the file and print sharing for networks

    Hi ,
    Recently print team has migrated the print server from the physical old server A to the VM server A-new .After the migration ,  the server A-new is retained with the name server A shutting down the old server .
    But the clients are reporting that they are not be able to print because we found that due to this print team migrated the old print server to the new print server with the duplicated entries which reflected in AD. This our server team came to know once
    the complaint raised  by the site person to us saying that their printers are not working at all.
    While checking the issue only then we found that the duplicated entries are found in the AD for the printer objects published in the AD.Print team has done the improper migration and left to server team saying that it is our responsibility to solve the issues.
    And I suspect that somebody has  removed the file and print for networks in the network portion of the windows.We came to know only when we try to take any share either file share or print from the particular server to file server.
    After enabling that option in the network portion , everything got resolved as the duplicate entries removed from the AD and published one instance of the printers.
    I need to find the event in which this action has been triggered to remove that component and from that to identify who has done that..
    Any help is greatly appreciated
    Thanks & Regards S.Swaminathan Live & let others live!!!

    There are some print events on the Domain Controller if one of the DC "pruned" the old print objects.  Unfortunately these are information events logged to Print-Service Operational channel which is not enabled by default.  You might
    be lucky and someone had these events enabled. 
    Check if the channel is enabled on all your domain controllers. 
    http://social.technet.microsoft.com/wiki/contents/articles/13308.troubleshooting-windows-server-2012-printing.aspx
    Alan Morris formerly with Windows Printing Team

  • Network Analysis Module - Capture File Download

    Hello,
    we have
    NAM Moduels Network Analysis Module 3 WS-SVC-NAM-3-K9
    installed in
    6506-E
    software version 6.0
    We have generated some Capture files, that we now would like to Download at once. Not by clicking each file and make a single download.
    There are some 2000 files, thats why :-)
    Does anyone have an idea how to do that? Is there any direct access to the internal Hard Drive? I could not find anything in CLI or GUI Guides.
    Thanks

    I attached a file with the 6509 config, sh snmp user and sh snmp result.
    When I go to :
    Setup > Managed Device > Device Information
    I've got :
    Access to the managed device failed. This may be due to
          1. Incorrect managed device IP address.
          2. Incorrect managed SNMP community string.
          3. The managed device's SNMP access control list is enabled.
    If the managed device's IP address or community string is incorrect, please use the input
    fields below to set the correct IP address and SNMP read-write community string.
    Otherwise, check if your managed device's SNMP access control list is enabled
    and make sure that the NAM's IP address shown in the Test popup
    window is included in the access control list.
    I've got this result when I test SNMP connectivity on the 2220. I tested snmpv3 with authpriv, authnopriv, noauthnopriv.
    Test Connectivity :
    SNMP read from managed device:     Failed    
    SNMP write from managed device:     Failed
    So I was thinking at some small license requirement for SNMPv3 as no packet were transmitted from the 2220. Unlike in SNMPv1 where I could capture the management packet.

  • Crashes when running applications from network share - "Windows cannot access the file for one of the following reasons"

    Hi,
    starting a couple of weeks ago, we get the following error(s) when running applications from a network share. We don't know what causes this, we are not aware of any major changes in our network infrastructure or client/Server configuration. We did upgrade
    a lot of machines to Windows 8, but the issue also occurs on older Win7 computers.
    We figured out a workaround though: The applications run fine when launching from a FQDN share (like
    \\share.domain.Company.com) and only cause problems when running from
    \\share directly. They have worked fine for years without FQDN though.
    Any ideas?
    Error Details (the Kind of error differs greatly):
    # 1 #
    Log Name: Application
    Source: Application Error
    Date: ...
    Event ID: 1005
    Task Category: (100)
    Level: Error
    Keywords: Classic
    User: N/A
    Computer: vmDEV
    Description:
    Windows cannot access the file for one of the following reasons: there is a problem with the network connection, the disk that the file is stored on, or the storage drivers installed on this computer; or the disk is missing. Windows closed the program XYZ
    because of this error.
    Program: XYZ
    File:
    The error value is listed in the Additional Data section.
    User Action
    1. Open the file again. This situation might be a temporary problem that corrects itself when the program runs again.
    2. If the file still cannot be accessed and
    - It is on the network, your network administrator should verify that there is not a problem with the network and that the server can be contacted.
    - It is on a removable disk, for example, a floppy disk or CD-ROM, verify that the disk is fully inserted into the computer.
    3. Check and repair the file system by running CHKDSK. To run CHKDSK, click Start, click Run, type CMD, and then click OK. At the command prompt, type CHKDSK /F, and then press ENTER.
    4. If the problem persists, restore the file from a backup copy.
    5. Determine whether other files on the same disk can be opened. If not, the disk might be damaged. If it is a hard disk, contact your administrator or computer hardware vendor for further assistance.
    Additional data
    Error value: C000020C [ also seen with code C00000C4]
    #2 (German error Messages from now on, we only use German OSes, the above english one is translated based on similar error Messages I found on the web) #
    Name der fehlerhaften Anwendung: XYZ.exe, Version: 2015.0.496.5054, Zeitstempel: 0x54ea67c3
    Name des fehlerhaften Moduls: clr.dll, Version: 4.0.30319.34014, Zeitstempel: 0x52e0b784
    Ausnahmecode: 0xc0000006
    Fehleroffset: 0x00026549
    ID des fehlerhaften Prozesses: 0x13ac
    Startzeit der fehlerhaften Anwendung: 0x01d055a854d36445
    Pfad der fehlerhaften Anwendung: \\share\application.exe
    Pfad des fehlerhaften Moduls: C:\Windows\Microsoft.NET\Framework\v4.0.30319\clr.dll
    Berichtskennung: 949ea933-c19b-11e4-bf04-78542e186754
    Vollständiger Name des fehlerhaften Pakets:
    Anwendungs-ID, die relativ zum fehlerhaften Paket ist:
    Anwendung: XYZ.exe
    Frameworkversion: v4.0.30319
    Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
    Ausnahmeinformationen: Ausnahmecode c0000006, Ausnahmeadresse 720B6549
    Stapel:
    # 3 #
    Anwendung: WpfApp.exe
    Frameworkversion: v4.0.30319
    Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
    Ausnahmeinformationen: System.Runtime.InteropServices.SEHException
    Stapel:
       bei SP.Forms.AutoCompleteSelectionBase.OnEnter(System.EventArgs)
       bei System.Windows.Forms.Control.NotifyEnter()
       bei System.Windows.Forms.ContainerControl.UpdateFocusedControl()
    # 4 #
    Anwendung: WpfApp.exe
    Frameworkversion: v4.0.30319
    Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
    Ausnahmeinformationen: System.Runtime.InteropServices.SEHException
    Stapel:
       bei System.IO.UnmanagedMemoryStream.ReadByte()
       bei System.IO.BinaryReader.ReadByte()
       bei System.IO.BinaryReader.Read7BitEncodedInt()
       bei System.Resources.ResourceReader._LoadObjectV2(Int32, System.Resources.ResourceTypeCode ByRef)
       bei System.Resources.ResourceReader.LoadObjectV2(Int32, System.Resources.ResourceTypeCode ByRef)
       bei System.Resources.ResourceReader.LoadObject(Int32, System.Resources.ResourceTypeCode ByRef)
       bei System.Resources.RuntimeResourceSet.GetObject(System.String, Boolean, Boolean)
       bei System.Resources.RuntimeResourceSet.GetObject(System.String, Boolean)
       bei System.Resources.ResourceManager.GetObject(System.String, System.Globalization.CultureInfo, Boolean)
       bei System.Resources.ResourceManager.GetStream(System.String, System.Globalization.CultureInfo)
    # 5 #
    Anwendung: WpfApp.exe
    Frameworkversion: v4.0.30319
    Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
    Ausnahmeinformationen: System.Runtime.InteropServices.SEHException
    Stapel:
       bei System.Reflection.RuntimeParameterInfo.get_Name()
       bei System.Diagnostics.StackTrace.ToString(TraceFormat)
       bei System.Environment.GetStackTrace(System.Exception, Boolean)
       bei System.Exception.GetStackTrace(Boolean)
       bei System.Exception.ToString(Boolean, Boolean)
       bei System.Exception.ToString(Boolean, Boolean)
       bei System.Exception.ToString(Boolean, Boolean)
       bei System.Exception.ToString()
    # 6 #
    Name der fehlerhaften Anwendung: XYZ.exe, Version: 2015.0.496.5054, Zeitstempel: 0x54ea834f
    Name des fehlerhaften Moduls: KERNELBASE.dll, Version: 6.3.9600.17278, Zeitstempel: 0x53eeb460
    Ausnahmecode: 0xe0434352
    Fehleroffset: 0x00012f71
    ID des fehlerhaften Prozesses: 0xa68
    Startzeit der fehlerhaften Anwendung: 0x01d0559cb7ec4ed6
    Pfad der fehlerhaften Anwendung: \\share\XYZ.exe
    Pfad des fehlerhaften Moduls: C:\WINDOWS\SYSTEM32\KERNELBASE.dll
    Berichtskennung: 010514d0-c190-11e4-bf04-78542e186754
    Vollständiger Name des fehlerhaften Pakets:
    Anwendungs-ID, die relativ zum fehlerhaften Paket ist:
    # 7 #
    Name der fehlerhaften Anwendung: XYZ.exe, Version: 2015.0.496.5054, Zeitstempel: 0x54ea7a6e
    Name des fehlerhaften Moduls: ntdll.dll, Version: 6.3.9600.17630, Zeitstempel: 0x54b0d74f
    Ausnahmecode: 0xc0000006
    Fehleroffset: 0x0006db27
    ID des fehlerhaften Prozesses: 0x18dc
    Startzeit der fehlerhaften Anwendung: 0x01d0559cb08529c3
    Pfad der fehlerhaften Anwendung: \\share\xyz.exe
    Pfad des fehlerhaften Moduls: C:\WINDOWS\SYSTEM32\ntdll.dll
    Berichtskennung: ef389186-c18f-11e4-bf04-78542e186754
    Vollständiger Name des fehlerhaften Pakets:
    Anwendungs-ID, die relativ zum fehlerhaften Paket ist:

    Hi,
    >>The applications run fine when launching from a FQDN share
    It sounds like a DNS suffix issue. When this issue occurs, please try to ping share on the client, then check if the corresponding IP address is correct. If the IP address is wrong, please adjust your settings of DNS to make sure that the client can resolve
    the share correctly.
    If it's very hard to change the settings of the DNS for some reason, as a work around, we can add the entry into the clients' hosts file.
    Best Regards.
    Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Service for network file system fails to install

    Installation of the File Service and Service for NFS in Windows 2008 R2 server fails. Following are the steps used to perform the install.
    Open Server Manager from Start> All Programs> Administrative Tools> Server Manager.
    Click on the Roles node in the left pane, and then click the
    Add Roles link.
    On the Add Roles Wizard welcome page, click Next to continue.
    From the list of roles to install, select File Services, and click
    Next to continue.
    On the Introduction to File Services page, click Next to continue.
    On the Select Role Services page, keep the File Server box checked and select
    Services for Network File System. Click Next to continue.
    On the Confirmation page, review the settings and click the Install button.
    Click Close when the wizard completes.
    ServerManager Log:
    From the ServerManager.log file under C:/Windows/Logs I can see the below.
    2272: 2013-02-12 16:13:51.479 [CBS]                       IsCacheStillGood: True.
    2272: 2013-02-12 16:14:05.534 [Provider]                  System changed since last refresh: False
    2272: 2013-02-12 16:15:45.816 [InstallationProgressPage]  Loading progress page...
    2272: 2013-02-12 16:15:45.831 [InstallationProgressPage]  Begining Sync operation...
    2272: 2013-02-12 16:15:45.842 [Sync]                     
    Sync Graph of changed nodes
    ==========
    name     : File Services
    state    : Changed
    rank     : 1
    sync tech: CBS
    guest[1] : File Server
    guest[2] : Distributed File System
    guest[3] : File Server Resource Manager
    guest[4] : Services for Network File System
    guest[5] : Single Instance Storage
    guest[6] : Windows Search Service
    guest[7] : Windows Server 2003 File Services
    guest[8] : BranchCache for network files
    provider : FileServerRoleProvider
    name     : Services for Network File System
    state    : Changed
    rank     : 2
    sync tech: CBS
    provider : FileServerRoleProvider
    name     : File Server
    state    : Changed
    rank     : 2
    sync tech: CBS
    provider : FileServerRoleProvider
    2272: 2013-02-12 16:15:45.842 [Sync]                      Calling sync provider of Services for Network File System ...
    2272: 2013-02-12 16:15:45.843 [FileServer]                Sync:: guest: 'Services for Network File System', guest deleted?: False
    2272: 2013-02-12 16:15:45.843 [FileServer]                Begin installation of 'Services for Network File System'...
    2272: 2013-02-12 16:15:45.843 [FileServer]                Install: Guest: 'Services for Network File System', updateElement: 'ServicesForNFS-ServerAndClient;ClientForNFS-Infrastructure;NFS-Administration;ServerForNFS-Infrastructure'
    2272: 2013-02-12 16:15:45.843 [FileServer]                Installation queued for 'Services for Network File System'.
    2272: 2013-02-12 16:15:45.843 [Sync]                      Calling sync provider of File Server ...
    2272: 2013-02-12 16:15:45.843 [FileServer]                Sync:: guest: 'File Server', guest deleted?: False
    2272: 2013-02-12 16:15:45.843 [FileServer]                Begin installation of 'File Server'...
    2272: 2013-02-12 16:15:45.843 [FileServer]                Install: Guest: 'File Server', updateElement: 'CoreFileServer'
    2272: 2013-02-12 16:15:45.843 [FileServer]                Installation queued for 'File Server'.
    2272: 2013-02-12 16:15:45.844 [CBS]                       installing 'ServicesForNFS-ServerAndClient ClientForNFS-Infrastructure
    NFS-Administration ServerForNFS-Infrastructure CoreFileServer ' ...
    2272: 2013-02-12 16:15:46.315 [CBS]                       ...parents that will be auto-installed: '<none>'
    2272: 2013-02-12 16:15:46.316 [CBS]                       ...default children to turn-off: '<none>'
    2272: 2013-02-12 16:15:46.325 [CBS]                       ...current state of 'ServicesForNFS-ServerAndClient': p:
    Staged, a: Staged, s: UninstallRequested
    2272: 2013-02-12 16:15:46.325 [CBS]                       ...setting state of 'ServicesForNFS-ServerAndClient' to
    'InstallRequested'
    2272: 2013-02-12 16:15:46.335 [CBS]                       ...current state of 'ClientForNFS-Infrastructure': p: Staged,
    a: Staged, s: UninstallRequested
    2272: 2013-02-12 16:15:46.336 [CBS]                       ...setting state of 'ClientForNFS-Infrastructure' to 'InstallRequested'
    2272: 2013-02-12 16:15:46.345 [CBS]                       ...current state of 'NFS-Administration': p: Staged, a:
    Staged, s: UninstallRequested
    2272: 2013-02-12 16:15:46.345 [CBS]                       ...setting state of 'NFS-Administration' to 'InstallRequested'
    2272: 2013-02-12 16:15:46.354 [CBS]                       ...current state of 'ServerForNFS-Infrastructure': p: Staged,
    a: Staged, s: UninstallRequested
    2272: 2013-02-12 16:15:46.354 [CBS]                       ...setting state of 'ServerForNFS-Infrastructure' to 'InstallRequested'
    2272: 2013-02-12 16:15:46.363 [CBS]                       ...current state of 'CoreFileServer': p: Staged, a: Staged,
    s: UninstallRequested
    2272: 2013-02-12 16:15:46.363 [CBS]                       ...setting state of 'CoreFileServer' to 'InstallRequested'
    2272: 2013-02-12 16:15:46.373 [CBS]                       ...'ServicesForNFS-ServerAndClient' : applicability: Applicable
    2272: 2013-02-12 16:15:46.390 [CBS]                       ...'ClientForNFS-Infrastructure' : applicability: Applicable
    2272: 2013-02-12 16:15:46.408 [CBS]                       ...'NFS-Administration' : applicability: Applicable
    2272: 2013-02-12 16:15:46.426 [CBS]                       ...'ServerForNFS-Infrastructure' : applicability: Applicable
    2272: 2013-02-12 16:15:46.435 [CBS]                       ...'CoreFileServer' : applicability: Applicable
    2272: 2013-02-12 16:15:46.493 [CbsUIHandler]              Initiate:
    2272: 2013-02-12 16:15:46.494 [InstallationProgressPage]  Installing...
    2272: 2013-02-12 16:15:51.958 [CbsUIHandler]              Error: -2147021879 :
    2272: 2013-02-12 16:15:51.958 [CbsUIHandler]              Terminate:
    2272: 2013-02-12 16:15:52.035 [InstallationProgressPage]  Verifying installation...
    2272: 2013-02-12 16:15:52.049 [CBS]                       ...done installing 'ServicesForNFS-ServerAndClient
    ClientForNFS-Infrastructure NFS-Administration ServerForNFS-Infrastructure CoreFileServer '.
    Status: -2147021879 (80070bc9)
    2272: 2013-02-12 16:15:52.052 [FileServer]                Skipped configuration of 'Services for Network File System' because install operation failed.
    2272: 2013-02-12 16:15:52.053 [FileServer]                Skipped configuration of 'File Server' because install operation failed.
    2272: 2013-02-12 16:15:52.053 [Provider]                 
    [STAT] ---- CBS Session Consolidation -----
    [STAT] For
              'Services for Network File System',
              'File Server'[STAT] installation(s) took '6.2058637' second(s) total.
    [STAT] Configuration(s) took '0.0002143' second(s) total.
    [STAT] Total time: '6.206078' second(s).
    2272: 2013-02-12 16:15:52.053 [Provider] Error (Id=0) Sync Result - Success: False, RebootRequired: True, Id: 105
    2272: 2013-02-12 16:15:52.053 [Provider] Error (Id=0) Sync Message - OperationKind: Install, MessageType: Error, MessageCode: -2147021879, Message: <null>, AdditionalMessage: The requested operation failed. A system reboot
    is required to roll back changes made
    2272: 2013-02-12 16:15:52.053 [Provider] Error (Id=0) Sync Result - Success: False, RebootRequired: True, Id: 255
    2272: 2013-02-12 16:15:52.053 [Provider] Error (Id=0) Sync Message - OperationKind: Install, MessageType: Error, MessageCode: -2147021879, Message: <null>, AdditionalMessage: The requested operation failed. A system reboot
    is required to roll back changes made
    2272: 2013-02-12 16:15:52.054 [InstallationProgressPage]  Sync operation completed
    2272: 2013-02-12 16:15:52.054 [InstallationProgressPage]  Performing post install/uninstall discovery...
    2272: 2013-02-12 16:15:52.056 [Provider]                  C:\Windows\system32\ServerManager\Cache\CbsUpdateState.bin does not exist.
    2272: 2013-02-12 16:15:52.056 [CBS]                       IsCacheStillGood: False.
    2272: 2013-02-12 16:15:52.526 [CBS]                       >>>GetUpdateInfo--------------------------------------------------
    2272: 2013-02-12 16:15:59.342 [CBS] Error (Id=0) Function: 'ReadUpdateInfo()->Update_GetInstallState' failed:
    80070bc9 (-2147021879)
    2272: 2013-02-12 16:15:59.342 [CBS]                       <<<GetUpdateInfo--------------------------------------------------
    2272: 2013-02-12 16:15:59.380 [DISCOVERY]                 hr: -2147021879 -> reboot required.
    2272: 2013-02-12 16:15:59.390 [InstallationProgressPage]  About to load finish page...
    2272: 2013-02-12 16:15:59.390 [InstallationFinishPage]    Loading finish page
    2272: 2013-02-12 16:15:59.401 [InstallationFinishPage]    Finish page loaded
    In Windows Event long I can see the following events logged:
    Event 3002, Port Map:
      Windows(R) failed a request to register RPC Port Mapper on TCP port 111.  RPC Port Mapper cannot start.
      Network File System (NFS) clients use RPC Port Mapper (also known as Portmap and Rpcbind) to discover NFS protocols on remote servers.  Without RPC Port Mapper, Server for NFS
    cannot start and NFS clients cannot access files on this server.
      Verify that no other software is registered on TCP port 111, then start Server for NFS manually (which will also start RPC Port Mapper).
    Event 7000, Service Control Manager:
    The Server for NFS Open RPC (ONCRPC) Portmapper service failed to start due to the following error:
    A device attached to the system is not functioning.
    Event 7001, Service Control Manager:
    The Server for NFS Driver service depends on the Server for NFS Open RPC (ONCRPC) Portmapper service which failed to start because of the following error:
    A device attached to the system is not functioning.
    Event 7001, Service Control Manager:
    The Server for NFS service depends on the Server for NFS Driver service which failed to start because of the following error:
    The dependency service or group failed to start.
    Based on a technet forum I have already checked and made sure there is no other service running on port 111 (command used is netstat -a -b -o).
    Dependent Service Status:
    During the installation process “Client for NFS” seems to have gone well and the service started successfully. But the “Server for NFS” failed, when checked for the status of the dependent process “portmap” service failed to start with the WIN32_EXIT_CODE
    “31 (0x1f)”. Please find below the query result.
    C:\Users\CMMAdmin>sc query rpcxdr
    SERVICE_NAME: rpcxdr
            TYPE               : 1  KERNEL_DRIVER
            STATE              : 4  RUNNING
                                    (STOPPABLE, NOT_PAUSABLE, IGNORES_SHUTDOWN)
            WIN32_EXIT_CODE    : 0  (0x0)
            SERVICE_EXIT_CODE  : 0  (0x0)
            CHECKPOINT         : 0x0
            WAIT_HINT          : 0x0
    C:\Users\CMMAdmin>sc query msnfsflt
    SERVICE_NAME: msnfsflt
            TYPE               : 2  FILE_SYSTEM_DRIVER
            STATE              : 4  RUNNING
                                    (STOPPABLE, NOT_PAUSABLE, IGNORES_SHUTDOWN)
            WIN32_EXIT_CODE    : 0  (0x0)
            SERVICE_EXIT_CODE  : 0  (0x0)
            CHECKPOINT         : 0x0
            WAIT_HINT          : 0x0
    C:\Users\CMMAdmin>sc query portmap
    SERVICE_NAME: portmap
            TYPE               : 1  KERNEL_DRIVER
            STATE              : 1  STOPPED
            WIN32_EXIT_CODE    : 31  (0x1f)
            SERVICE_EXIT_CODE  : 0  (0x0)
            CHECKPOINT         : 0x0
            WAIT_HINT          : 0x0
    C:\Users\CMMAdmin>
    As the EXIT CODE is 31 ( A device attached to the system is not functioning), I have checked device manager and made sure there is no yellow warning shown against any hardware device. Further I am not sure how to proceed and debug this issue.
    Please let me know if you have any suggestion on how debug this issue further.
    Thanks
    -Poopesh

    Hey,
    I had this same problem running MS Server 2008 R2 and server log is as follow:
    name     : Services for Network File System
    state    : Changed
    rank     : 2
    sync tech: CBS
    ant.     : empty
    pred.    : File Services
    provider : FileServerRoleProvider
    5676: 2014-01-14 14:08:57.474 [Sync]                      Calling sync provider of Services for Network File System ...
    5676: 2014-01-14 14:08:57.521 [FileServer]                Sync:: guest: 'Services for Network File System', guest deleted?: False
    5676: 2014-01-14 14:08:57.536 [FileServer]                Begin installation of 'Services for Network File System'...
    5676: 2014-01-14 14:08:57.536 [FileServer]                Install: Guest: 'Services for Network File System', updateElement: 'ServicesForNFS-ServerAndClient;ClientForNFS-Infrastructure;NFS-Administration;ServerForNFS-Infrastructure'
    5676: 2014-01-14 14:08:57.536 [FileServer]                Installation queued for 'Services for Network File System'.
    5676: 2014-01-14 14:08:57.536 [CBS]                       installing 'ServicesForNFS-ServerAndClient ClientForNFS-Infrastructure NFS-Administration
    ServerForNFS-Infrastructure ' ...
    5676: 2014-01-14 14:09:00.173 [CBS]                       ...parents that will be auto-installed: '<none>'
    5676: 2014-01-14 14:09:00.173 [CBS]                       ...default children to turn-off: '<none>'
    5676: 2014-01-14 14:09:00.204 [CBS]                       ...current state of 'ServicesForNFS-ServerAndClient': p: Staged, a: Staged, s: UninstallRequested
    5676: 2014-01-14 14:09:00.204 [CBS]                       ...setting state of 'ServicesForNFS-ServerAndClient' to 'InstallRequested'
    5676: 2014-01-14 14:09:00.235 [CBS]                       ...current state of 'ClientForNFS-Infrastructure': p: Staged, a: Staged, s: UninstallRequested
    5676: 2014-01-14 14:09:00.235 [CBS]                       ...setting state of 'ClientForNFS-Infrastructure' to 'InstallRequested'
    5676: 2014-01-14 14:09:00.266 [CBS]                       ...current state of 'NFS-Administration': p: Staged, a: Staged, s: UninstallRequested
    5676: 2014-01-14 14:09:00.266 [CBS]                       ...setting state of 'NFS-Administration' to 'InstallRequested'
    5676: 2014-01-14 14:09:00.282 [CBS]                       ...current state of 'ServerForNFS-Infrastructure': p: Staged, a: Staged, s: UninstallRequested
    5676: 2014-01-14 14:09:00.282 [CBS]                       ...setting state of 'ServerForNFS-Infrastructure' to 'InstallRequested'
    5676: 2014-01-14 14:09:00.313 [CBS]                       ...'ServicesForNFS-ServerAndClient' : applicability: Applicable
    5676: 2014-01-14 14:09:00.360 [CBS]                       ...'ClientForNFS-Infrastructure' : applicability: Applicable
    5676: 2014-01-14 14:09:00.422 [CBS]                       ...'NFS-Administration' : applicability: Applicable
    5676: 2014-01-14 14:09:00.469 [CBS]                       ...'ServerForNFS-Infrastructure' : applicability: Applicable
    5676: 2014-01-14 14:09:01.624 [CbsUIHandler]              Initiate:
    5676: 2014-01-14 14:09:01.624 [InstallationProgressPage]  Installing...
    5676: 2014-01-14 14:09:35.117 [CbsUIHandler]              Error: -2147021879 :
    5676: 2014-01-14 14:09:35.117 [CbsUIHandler]              Terminate:
    5676: 2014-01-14 14:09:41.170 [InstallationProgressPage]  Verifying installation...
    5676: 2014-01-14 14:09:41.264 [CBS]                       ...done installing 'ServicesForNFS-ServerAndClient ClientForNFS-Infrastructure NFS-Administration
    ServerForNFS-Infrastructure '. Status: -2147021879 (80070bc9)
    5676: 2014-01-14 14:09:41.279 [FileServer]                Skipped configuration of 'Services for Network File System' because install operation failed.
    5676: 2014-01-14 14:09:41.279 [Provider]                 
    [STAT] ---- CBS Session Consolidation -----
    [STAT] For
              'Services for Network File System'[STAT] installation(s) took '43.7368586' second(s) total.
    [STAT] Configuration(s) took '0.0062843' second(s) total.
    [STAT] Total time: '43.7431429' second(s).
    5676: 2014-01-14 14:09:41.279 [Provider] Error (Id=0) Sync Result - Success: False, RebootRequired: True, Id: 105
    5676: 2014-01-14 14:09:41.279 [Provider] Error (Id=0) Sync Message - OperationKind: Install, MessageType: Error, MessageCode: -2147021879, Message: <null>, AdditionalMessage: The requested operation failed. A system reboot is required to roll back changes
    made
    5676: 2014-01-14 14:09:41.279 [InstallationProgressPage]  Sync operation completed
    5676: 2014-01-14 14:09:41.279 [InstallationProgressPage]  Performing post install/uninstall discovery...
    5676: 2014-01-14 14:09:41.295 [Provider]                  C:\windows\system32\ServerManager\Cache\CbsUpdateState.bin does not exist.
    5676: 2014-01-14 14:09:41.295 [CBS]                       IsCacheStillGood: False.
    5676: 2014-01-14 14:09:43.900 [CBS]                       >>>GetUpdateInfo--------------------------------------------------
    5676: 2014-01-14 14:09:57.394 [CBS] Error (Id=0) Function: 'ReadUpdateInfo()->Update_GetInstallState' failed: 80070bc9 (-2147021879)
    5676: 2014-01-14 14:09:57.410 [CBS]                       <<<GetUpdateInfo--------------------------------------------------
    5676: 2014-01-14 14:09:57.488 [DISCOVERY]                 hr: -2147021879 -> reboot required.
    5676: 2014-01-14 14:09:57.613 [InstallationProgressPage]  About to load finish page...
    5676: 2014-01-14 14:09:57.628 [InstallationFinishPage]    Loading finish page
    5676: 2014-01-14 14:09:57.644 [InstallationFinishPage]    Finish page loaded
    My solution was to run netstat -ano to identify what process was running on port TCP/UDP :111, then with the command tasklist I got PID matching with the task name. Once identified I stopped the process, rebooted and installed
    the NFS service. On top of that, before installing NFS services I disabled firewall and antivirus. It worked fine for me. I hope this will be usefull for you. By the way, don't forget to enable all process back!
    Have a good one!

  • TNS-12560: Message 12560 not found; No message file for product=NETWORK

    I have downloaded and installed the SQL *Plus client software from the URL http://www.oracle.com/technology/tech/sql_plus/index.html
    This should help me connect to the Oracle database
    Following is the error I have in the sqlnet.log file (located at C:\oracle\product\10.2.0\client_1\BIN)
    Fatal NI connect error 12560, connecting to:
    (DESCRIPTION=(ADDRESS=(PROTOCOL=BEQ)(PROGRAM=oracle)(ARGV0=oracleORCL)(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))'))(CONNECT_DATA=(SID=ORCL)(CID=(PROGRAM=C:\oracle\product\10.2.0\client_1\BIN\sqlplus.exe)(HOST=PEM270639IC)(USER=mattut))))
    VERSION INFORMATION:
    TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
    Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 10.2.0.1.0 - Production
    Time: 10-SEP-2007 10:45:13
    Tracing not turned on.
    Tns error struct:
    ns main err code: 12560
    TNS-12560: Message 12560 not found; No message file for product=NETWORK, facility=TNS
    ns secondary err code: 0
    nt main err code: 530
    TNS-00530: Message 530 not found; No message file for product=NETWORK, facility=TNS
    nt secondary err code: 126
    nt OS err code: 0

    Where are you trying to connect to?
    If you want a local database you must down and install for example the Oracle 10 Express

  • Capturing user state........ Retaining files for a specific time?

    Capturing user state........ Retaining files for a specific time?
    Can I retain the user files/data for a specific time as a copy after capturing user states then restoring them? If so what's the procedure and location of the files?
    tconners

    If you are using a SMP, yes, this is built-in functionality. The files are located in the location(s) specified on your SMP configuration. You'll also need the computer association that created them because it contains the encryption key.
    Jason | http://blog.configmgrftw.com

  • Windows Could Not parse or process unattend answer file for pass [specialize] after WDT Litetouch 'sysprep and capture'

    I setup an ACER VM6620G (Win7x86) how I wanted, including disabling the administrator account and creating an administrator user "PVA"
    Navigated to \\wds\DeploymentShare$\Scripts and ran the litetouch script. Chose my "Sysprep and Capture" task. 
    Everything went off without a hitch until I restarted the technician pc. 
    I got the dreaded
    "Windows could not parse or process unattend answer file [C:\windows\Panther\unattend.xml] for pass [specialize]. A component or setting specified in the answer file does not exist"
    I tried to deploy the captured image to the same computer and got the same error
    I've scoured the internet for solutions (Shift+10 opens command prompt. Good to know!) with no luck.
    I've saved the unattend.xml and looked for errors- going as far as to install an x86 Win7 virtual machine to validate the unattend.xml file in WISM
    Other information that might be useful:
       I never used WISM to create an unattend.xml nor did I attach one to the image. 
       I didn't try to copy user profiles/settings/migrate etc
       I imported the captured image to WDT. Created a standard task and added 2 nodes 
         -Inject Drivers
         -Install Application
    As a side, I've got another image that I've already injected the drivers/installed the application as a test. Everything went smoothly.
    +-----------------+
     | Unattend.xml: 
    +-----------------+
    <?xml version="1.0" encoding="utf-8"?>
    <unattend xmlns="urn:schemas-microsoft-com:unattend">
    <settings pass="windowsPE">
    <component name="Microsoft-Windows-Setup" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State">
    <ImageInstall>
    <OSImage>
    <WillShowUI>OnError</WillShowUI>
    <InstallTo>
    <DiskID>0</DiskID>
    <PartitionID>2</PartitionID>
    </InstallTo>
    <InstallFrom>
    <Path>\\10.0.0.1\deploymentshare$\Operating Systems\ACER Win7 x86 Capture\ACER Win7 x86 Capture.wim</Path>
    <MetaData>
    <Key>/IMAGE/INDEX</Key>
    <Value>1</Value>
    </MetaData>
    </InstallFrom>
    </OSImage>
    </ImageInstall>
    <Display>
    <ColorDepth>16</ColorDepth>
    <HorizontalResolution>1024</HorizontalResolution>
    <RefreshRate>60</RefreshRate>
    <VerticalResolution>768</VerticalResolution>
    </Display>
    <ComplianceCheck>
    <DisplayReport>OnError</DisplayReport>
    </ComplianceCheck>
    <UserData>
    <AcceptEula>true</AcceptEula>
    </UserData>
    </component>
    <component name="Microsoft-Windows-International-Core-WinPE" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <SetupUILanguage>
    <UILanguage>en-US</UILanguage>
    </SetupUILanguage>
    <InputLocale>0409:00000409</InputLocale>
    <SystemLocale>en-US</SystemLocale>
    <UILanguage>en-US</UILanguage>
    <UserLocale>en-US</UserLocale>
    </component>
    </settings>
    <settings pass="generalize">
    <component name="Microsoft-Windows-Shell-Setup" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <DoNotCleanTaskBar>true</DoNotCleanTaskBar>
    </component>
    </settings>
    <settings pass="specialize">
    <component name="Microsoft-Windows-UnattendedJoin" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State">
    <Identification>
    <JoinWorkgroup>WORKGROUP</JoinWorkgroup>
    </Identification>
    </component>
    <component name="Microsoft-Windows-Shell-Setup" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State">
    <ComputerName>PVA-PC</ComputerName>
    <RegisteredOrganization>PVA</RegisteredOrganization>
    <RegisteredOwner>PVA</RegisteredOwner>
    <TimeZone>"Eastern Standard Time"</TimeZone>
    <DoNotCleanTaskBar>true</DoNotCleanTaskBar>
    </component>
    <component name="Microsoft-Windows-IE-InternetExplorer" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <Home_Page>about:blank</Home_Page>
    <IEWelcomeMsg>false</IEWelcomeMsg>
    </component>
    <component name="Microsoft-Windows-Deployment" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <RunSynchronous>
    <RunSynchronousCommand wcm:action="add">
    <Description>EnableAdmin</Description>
    <Order>1</Order>
    <Path>cmd /c net user Administrator /active:yes</Path>
    </RunSynchronousCommand>
    <RunSynchronousCommand wcm:action="add">
    <Description>UnfilterAdministratorToken</Description>
    <Order>2</Order>
    <Path>cmd /c reg add HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System /v FilterAdministratorToken /t REG_DWORD /d 0 /f</Path>
    </RunSynchronousCommand>
    <RunSynchronousCommand wcm:action="add">
    <Description>disable user account page</Description>
    <Order>3</Order>
    <Path>reg add HKLM\Software\Microsoft\Windows\CurrentVersion\Setup\OOBE /v UnattendCreatedUser /t REG_DWORD /d 1 /f</Path>
    </RunSynchronousCommand>
    </RunSynchronous>
    </component>
    <component name="Microsoft-Windows-International-Core" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <InputLocale>en-US</InputLocale>
    <SystemLocale>en-US</SystemLocale>
    <UILanguage>en-US</UILanguage>
    <UserLocale>en-US</UserLocale>
    </component>
    <component name="Microsoft-Windows-TapiSetup" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <TapiConfigured>0</TapiConfigured>
    <TapiUnattendLocation>
    <AreaCode>""</AreaCode>
    <CountryOrRegion>1</CountryOrRegion>
    <LongDistanceAccess>9</LongDistanceAccess>
    <OutsideAccess>9</OutsideAccess>
    <PulseOrToneDialing>1</PulseOrToneDialing>
    <DisableCallWaiting>""</DisableCallWaiting>
    <InternationalCarrierCode>""</InternationalCarrierCode>
    <LongDistanceCarrierCode>""</LongDistanceCarrierCode>
    <Name>Default</Name>
    </TapiUnattendLocation>
    </component>
    <component name="Microsoft-Windows-SystemRestore-Main" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <DisableSR>1</DisableSR>
    </component>
    </settings>
    <settings pass="oobeSystem">
    <component name="Microsoft-Windows-Shell-Setup" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State">
    <UserAccounts>
    <AdministratorPassword>
    <Value></Value>
    <PlainText>true</PlainText>
    </AdministratorPassword>
    </UserAccounts>
    <AutoLogon>
    <Enabled>true</Enabled>
    <Username>Administrator</Username>
    <Domain>.</Domain>
    <Password>
    <Value></Value>
    <PlainText>true</PlainText>
    </Password>
    <LogonCount>999</LogonCount>
    </AutoLogon>
    <Display>
    <ColorDepth>32</ColorDepth>
    <HorizontalResolution>1024</HorizontalResolution>
    <RefreshRate>60</RefreshRate>
    <VerticalResolution>768</VerticalResolution>
    </Display>
    <FirstLogonCommands>
    <SynchronousCommand wcm:action="add">
    <CommandLine>wscript.exe %SystemDrive%\LTIBootstrap.vbs</CommandLine>
    <Description>Lite Touch new OS</Description>
    <Order>1</Order>
    </SynchronousCommand>
    </FirstLogonCommands>
    <OOBE>
    <HideEULAPage>true</HideEULAPage>
    <NetworkLocation>Work</NetworkLocation>
    <ProtectYourPC>1</ProtectYourPC>
    </OOBE>
    <RegisteredOrganization>PVA</RegisteredOrganization>
    <RegisteredOwner>PVA</RegisteredOwner>
    <TimeZone>"Eastern Standard Time"</TimeZone>
    </component>
    <component name="Microsoft-Windows-International-Core" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <InputLocale>en-US</InputLocale>
    <SystemLocale>en-US</SystemLocale>
    <UILanguage>en-US</UILanguage>
    <UserLocale>en-US</UserLocale>
    </component>
    </settings>
    <settings pass="offlineServicing">
    <component name="Microsoft-Windows-PnpCustomizationsNonWinPE" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <DriverPaths>
    <PathAndCredentials wcm:keyValue="1" wcm:action="add">
    <Path>\Drivers</Path>
    </PathAndCredentials>
    </DriverPaths>
    </component>
    </settings>
    </unattend>

    https://skydrive.live.com/redir?resid=55C3109D61329D02!108&authkey=!AG793wDwQuFZa1s
    Here's the end of the log file:
    2013-03-27 17:39:05, Info CMI CBS_Core_Finalize:Calling cbs core finalize complete
    2013-03-27 17:39:05, Info CMI Callback_CMI_ConfigInstall: CBS startup processing re-run complete.
    2013-03-27 17:39:05, Info [0x030023] CMI Callback_CMI_ConfigInstall: Exit.
    2013-03-27 17:39:05, Info [setup.exe] UnattendSearchExplicitPath: Found unattend file at [C:\windows\Panther\unattend.xml]; examining for applicability.
    2013-03-27 17:39:05, Info [setup.exe] UnattendSearchExplicitPath: Found usable unattend file for pass [specialize] at [C:\windows\Panther\unattend.xml].
    2013-03-27 17:39:06, Info IBS Callback_Unattend_InitEngine:Using unattend file found at [C:\windows\Panther\unattend.xml].
    2013-03-27 17:39:06, Info [setup.exe] ValidateSMIPass: serialized settings stream; status 0x00000000
    2013-03-27 17:39:06, Info [setup.exe] ValidateSMIPass: construct settings context; status 0x00000000
    2013-03-27 17:39:06, Error [setup.exe] SMI data results dump: Source = Name: Microsoft-Windows-IE-InternetExplorer, Language: neutral, ProcessorArchitecture: x86, PublicKeyToken: 31bf3856ad364e35, VersionScope: nonSxS, /settings/IEWelcomeMsg
    2013-03-27 17:39:06, Error [setup.exe] SMI data results dump: Description = Setting is not defined in this component.
    2013-03-27 17:39:06, Info [setup.exe] ValidateSMIPass: load SMI settings; status 0x00000001
    2013-03-27 17:39:06, Error [0x060432] IBS The provided unattend file is not valid; hrResult = 0x80220001
    2013-03-27 17:39:06, Error [0x060565] IBS Callback_Unattend_InitEngine:The provided unattend file [C:\windows\Panther\unattend.xml] is not a valid unattended Setup answer file; hr = 0x1, hrSearched = 0x1, hrDeserialized = 0x0, hrImplicitCtx = 0x0, hrValidated = 0x1, hrResult = 0x80220001
    2013-03-27 17:39:06, Info IBS UnattendErrorFromResults: Hit an unattend error; dumping any info we have about the failure...
    2013-03-27 17:39:06, Info IBS UnattendDumpSetting: ------Unattend setting error / warning------
    2013-03-27 17:39:06, Info IBS UnattendDumpSetting: Error code = 0x80220001
    2013-03-27 17:39:06, Info IBS UnattendDumpSetting: Pass = specialize
    2013-03-27 17:39:06, Info IBS UnattendDumpSetting: --------------------------------------------
    2013-03-27 17:39:06, Info IBS UnattendErrorFromResults: Error text = Windows could not parse or process unattend answer file [C:\windows\Panther\unattend.xml] for pass [specialize]. A component or setting specified in the answer file does not exist.
    2013-03-27 17:39:06, Error [0x0600c2] IBS Callback_Unattend_InitEngine:An error occurred while finding/loading the unattend file; hr = 0x1, hrResult = 0x80220001[gle=0x00000490]
    2013-03-27 17:39:06, Info IBSLIB PublishCriticalError: Publishing blocked message [Windows could not parse or process unattend answer file [C:\windows\Panther\unattend.xml] for pass [specialize]. A component or setting specified in the answer file does not exist.]
    2013-03-27 17:39:06, Info This installation is blocked from completing due to compliance failures or invalid input; this is not an internal error.
    Also, here's my customsettings.ini as I think it changes the unattend?
    [Settings]
    Priority=Default
    Properties=MyCustomProperty
    [Default]
    SkipDomainMembership=YES
    DomainAdmin=Administrator
    DomainAdminDomain=go.local
    DomainAdminPassword=************
    SkipTimeZone=YES
    TimeZone="035"
    TimeZoneName="Eastern Standard Time"
    SkipLocaleSelection=YES
    KeyboardLocale=en-US
    UserLocale=en-US
    UILanguage=en-US
    Bootstrap.ini:
    [Settings]
    Priority=Default
    [Default]
    DeployRoot=\\10.0.0.1\DeploymentShare$
    UserID=Administrator
    UserDomain=go.local
    UserPassword=***********
    KeyboardLocale=en-US
    SkipAdminPassword=YES
    SkipProductKey=YES
    SkipBitLocker=YES

  • Cloned volume gets stuck at boot "Waiting for Network File System"

    I've used "Carbon Copy Cloner" many times with success and no problems (v 2.3 , default settings, make destination bootable) as I migrated to larger drives or make backups in advance of a major OS upgrade.
    Last time I was successful, I was at OS 10.3.5. I use 3rd drive to boot my Mac, then clone the one non-boot drive to the other. I do the disk repairs & permission repairs as the normal course of this process, before & after. I am now at 10.3.9. I am do this clone in prep to go to 10.4 so I have a good back in the event of later problems.
    When I attempt to boot from the newly cloned partition, it goes fine on the boot process until it hangs at the "Waiting for Network File System" step and never gets past there. I've never had this happen before. I retired all the steps, even ran "Diskwarrier", but no change.
    I am not trying to run from a remote or network drive, just a 2nd drive in my
    G4 from which I have previously been able to boot (until this last clone attempt that is).
    I googled the symptoms ""Waiting for Network File System"", found it to be common, but no real answers. Is this one of those annoying UNIX things? Any ideas how to fix / turn-off whatever is hanging the boot up? Thanks in advance!

    Hi Kool,
    So there seems to be a "speed-bump" around 10.3.9. No wonder I have had the same results with a different tint. I went to Drive Genius to clone this one. Results with that were interesting.
    If I did a [Device] clone, it would take and show at start with 'option' key... and work just like my internal with 3 accounts on it... login and proceed like it was internal. If I did a [Volume] clone, it would not show up at start with the 'option' key... I'd have to boot it from System Preferences > Start-up Drive. Once booted, it had no login screen so all the files were accessible. I took the clone of this 3 account PB and tried it on an iBook. Had to boot from System Preferences too, also, all the account were accessible from that machine... implying that anyone who had that drive could get past/into my files that would be secure on my computer, but not on the clone. If I took the [Device] clone and booted from the ibook at start with the option key, it would not get past the login screen... altho the mouse worked and I could click on the name, that was as far as it got, Froze.
    So, I have figured, for safety, a [Device] clone is it, as long as the original computer lives. The safety features for login seem to be hardwired in the chip that the clone was made from (The iBook had 2 accounts but not my 3). If safety is not an issue, the [Volume] clone is fine... like moving to a newer OS on the same computer. It would seem from your experimentations that the situations with this 10.3.9 is just a hick-up and is solved in 10.4.3 with CCC v3...
    Thanks for your info... I am thinking of going to Tiger, but I am so fond of this Panther...
    Bo

  • Generate xml source file for Oracle Order Capture Print Quote

    Hi,
    I am new to xml and need to work on creating templates for Print Quote.
    I am trying to generate the xml source file for which I enabled the report in system administrator and set the output to XML and assigned to Quoting Reports responsiblity. I then assigned XML Report Publisher to the same responsiblity.
    I ran the report (Print Quote) and then I am trying to run the XML Report Publisher but I cannot get the request id in the list of values.
    I am able to generate xml source file for other reports like Printed Purchase Order etc.,
    The view output for the (Print Quote) report is as follows:
    <?xml version="1.0" ?>
    - <!-- Generated by Oracle Reports version 6.0.8.26.0
    -->
    <ASOPQTER />
    How do I get the xml source file? Or are there seeded templates that I can use to create more templates? Any help would be appreciated. Thanks Ravi

    Hi, I am in the same position - did this issue ever ger resolved by anyone. I have done a few XMLP reports successfully now using the Word add-in, but customising the Quote output differs from other standard reports.
    If you look at the data definition for Quote it is a 'dummy' definition and has no XML file attached. Does anyone know how I can get the XML format for the report output?
    Also the template uses XSL-FO ?!?!?! rather than RTF - not sure how to work with this, the Oracle docs are not very helpful in this regard either.
    Has anyone successfully managed to customise the Quote print report? Many thanks,
    Roger

  • Multiple context mode, how to download the packet capture file

    Hi guys,
    Is there a way to download the packet capture file from a specific context? I know that I used to use https://<ASA_IP>/admin/capture/<capture> to download it if it is just one context. 
    The ASA uses mgmt 0/0 for management and it is connected in a separate OOB network. Only this network has TFTP servers for uploading the capture file. The context in question is in transparent mode. Its IP doesn't have access to any TFTP server.
    Thanks!
    Difan

    Hello Difan,
                         Please refer the following document.
    https://supportforums.cisco.com/document/69281/asa-using-packet-capture-troubleshoot-asa-firewall-configuration-and-scenarios
    Also what version of the ASA code are you using?
    Regards,
    Jai Ganesh K

  • Saving file to network location

    Hello all of you,
    I encounter an issue with InDesign CS5 when it comes to opening and saving files to a network location. I added my company's ftp server to Windows 7 and it appears correctly in the My computer overview (there's an additional line besides the hard discs, DVD player, et cetera). The connection to the server functions fine, no issues here. No problem exists when opening files from this server from within InDesign; I can do whatever I want. Only when I try to save a file the network location isn't displayed anymore within the My computer overview in the InDesign "Save as" dialog box. The network location however appears in the pull-down menu at the top of the dialog box (and nested as part of My computer ...), but when I pick it there, it won't show the context of the server. Additionally logging onto the server (it's IP-based and anonymous logon) doesn't change a thing. Trying to save in the empty server space InDesign returns a "Can't save here" error message.
    Does anyone know how to solve this issue? Building the document locally and then copying back to the server isn't a solution, because all external content that is linked in the document resides on the server.
    Best regards,
    Luc Peulen

    Does anyone know how to solve this issue? Building the document locally and then copying back to the server isn't a solution, because all external content that is linked in the document resides on the server.
    Scott is basically right. Lots of ID users work over network connections without issue, but if something is going wrong, it's the first place to look. I wouldn't have thought it possible to work in InDesign over a FTP connection!
    If you can get Windows to access that server as if it were just another drive (using "Map network drive" in Explorer) then it should work normally. However, a generic Adobe phone tech wouldn't help you figure out why it wouldn't work - there are simply too many variables in a network environment for a generic first-level tech to figure out.
    In the short term, the only solution I can suggest is:
    Retrieve all of that external content that is linked in the document, and the InDesign document, at the same time, & store it on your local hard drive.
    Do your work.
    Save & package.
    Upload the entire package back to the server.
    Long-term, you'd need to talk to your own IT staff to troubleshoot the connection between your workstation and the FTP server. If you can get information about your network from them to post here, I bet that someone will make suggestions to pass on to your IT staff that will actually work.

Maybe you are looking for

  • Mavericks won't run PSCS5 or ILCS6

    I use a MacBook Pro running OSX v10.9 with a 2.66 GHz Intel Core i7 and 4 GB 1067 MHz DDR3. I use Adobe Photoshop CS5 and Adobe Illustrator CS6. After installing Mavericks last night, I spent a couple hours figuring out that I had to install a Java u

  • Newly repaired laptop- how can I sync voice memos from to itunes from my iphone without erasing the contents of my phone?

    Hi, Can anyone help with this? MyDell laptop died and I had to wipe it and start all over again. I use voice memos a lot for work and I need to sync them onto my PC so I can email them to people. However, since I fixed my laptop and redownloaded itun

  • Mail junk not going to Junk folder

    I want mail to filter junk (including previous emails) and automatically place it in the junk folder. Currently, all it is doing is marking mail as junk within the inbox, and no junk emails are showing up in the junk folder. I tried unchecking and re

  • Automatic tempfile offline due to write error on

    Hi everybody, I am getting the following in my alert log and my TEMPFILE went offline. KCF: write/open error block=0x5a909 online=1 file=4 /database1/oratemp1/temp1_04.dbf error=27091 txt: 'HP-UX Error: 28: No space left on device Automatic tempfile

  • .mov files panasonic

    I have .mov files from a panasonic camere which I cannot play in premiere elements 10, is there a solution?