Animate table row-wise in arbitrary order

Dear all,
I would like to animate a table such that the content appear row-wise, but e.g. first row 1, then row 3 and then row 2.
How to do that?
I failed, when tried to define the animate for each element separately, since I was not able to move row 3 before row 2.
Any suggestions?
Thanks,
Thomas

It doesn't appear to be a way to do this automatically, so what you probably have to do is duplicate the chart for as many times as you have rows and then set them to build in in the order you wish. Would be a pain in the butt, but should work.

Similar Messages

Ordering row wise totals in a column.

Hi,
I have a report in Pivot view having two columns namely Count and Category. I have to apply sort on these two columns-first on Count and then on Category.
The Total Count is also calculated row wise. Now when I apply sort on count column, only the values in that column are being sorted and not according to row wise total count. But my requirement is to sort the total count row wise first and then by Category.I am unable to do so.
Kindly provide me the solution to this problem.
Thanks
Ankita

Use RunningSum() function.
Regards,
Rohit

How can I restore table rows to their original, unsorted order?

I understand that I could've manually created an "Order" column of sequential numbers and then sort by that.
What I'm looking for is an "unsort" that restores rows to the (manual) order they were in before any sorting was applied.
(Or does Numbers '09 permanently replace the pre-sorted order? That'd be a bit ...err ...'80s.) ;-]

Simon Poisson wrote:
Thanks Jerry,
Seems I assumed that sorting in Numbers '09 merely applied a reversible "view", much as its Insert Categories function does.
For a Sheet with hundreds of rows, then, how would I apply the original order from a backup to the current edited, sorted rows?
Or are we meant to manually locate and then drag each and every one of the hundreds of rows back to its original order? (That's about 6 hours or more of the unpleasant manual work that computers are supposed to do for us!)
It's unfortunate that you made a false assumption about the sort feature. Numbers does indeed move the rows about as does every other spreadsheet app I've used.
I wonder if there is anything in your data that you could sort on that would get you close to the original order. If you know how you would move the rows about, could you express that as a rule? If there's nothing in the data that is correlated to the order of the rows, then the order of the rows may not be extremely significant.
Jerry

Use Session Variable with row-wise initialization

Hello,
I use an initialization block in order to load some translations in my repository (version is 11.1.1.6.BP1) :
SQL :
SELECT CODE_KEY, STRING_VALUE FROM "TABLES" WHERE LANGUAGE_KEY= 'VALUEOF(NQ_SESSION.USERLOCALE)'
Values :
CN_INCOMING, Incoming, en
CN_OUTGOING, Outgoing, en
CN_INCOMING, Réception, fr
CN_OUTGOING, Emission, fr
etc ...
I checked the row-wise intialization.
The query is correct and returns the right values (I check in the log file ..).
So far, So good.
But when I want to use session variables in a column expression (in repository) like :
CASE WHEN "column"="xx" THEN VALUEOF(NQ_SESSION."CN_INCOMING") ELSE VALUEOF(NQ_SESSION."CN_OUTGOING") END
I got the error: [nQSError: 23006] The session variable, NQ_SESSION.CN_OUTGOING, has no value definition.
If I used the same formula directly in Answers it's working correctly.
Do I have to necessarily do this in answers or is there a way to do this in the repository.
Thanks in advance
Regards
Benjamin

Yes I already tested this point, when I don't use a row wise initialization it's working, but I don't want to create one variable for each translations that I need to use in column formula if you know what I mean.
I don't understand why we can't use this kind of variable in this context ..but if I have to create the column in my analysis, I will do that, but it's not really user friendly
Anyway thanks for your time.

Using row-wise multi-value GROUP system session variable in report filter

The title says it all except I am using 10g OBIEE.
What I want to do is filter on the dynamic system session variable GROUP created in a row-wise initialization block.
The GROUP vriable is being set up correctly and it shows the user dynamically put into the correct groups in Answers.
(Using the admin tool and looking at the user session, only the initial authentication block variables show up.)
But if I want to filter using the value of GROUP it doesn't work.
The obvious way is to choose the filter icon, then choose Add -> Variable -> Session, enter GROUP, and then display results.
It comes back with no rows.
Any idea how to do this? I've tried lots of things but none of them work either producing no rows or an error.
This is the kind of Answers SQL this report is resulting in, which makes sense to me, but produces no rows.
SELECT "Package Virtual Group (Dim)"."Package Virtual Group" saw_0, "Contact (Fact)"."Contacts All Count" saw_1 FROM "Case/Transaction/ABC" WHERE "Package Virtual Group (Dim)"."Package Virtual Group" = VALUEOF(NQ_SESSION."GROUP") ORDER BY saw_0

866038 wrote:
Errors come from trying things that don't work.
For example, instead of =, using IN VALUEOF(NQ_SESSION.GROUP) or @{session.GROUP} or lots of other things.
The question is this:
how can I filter a column in Answers using the GROUP session variable which had been initialized in a row-wise initialization block?
I can find no way to do it. Mostly it returns no rows.Hi,
we had a similar requirement, where we have an external name that has project number values. We used row wise initialization to capture all the projects that a user belongs to. Then, we applied the filters at the RPD level, instead of doing it at the report level. From you requirement I see that you are trying to filter the groups based on user login. When a user logs in, he will see the information about the groups that he only belongs to. Correct me if I am wrong here.
Assuming I am right about your requirement, providing the filter that you need apply in RPD.
On all the fact tables are joined to the Package Virtual Group dimension, apply the below filter.
case when 1=1 then (Dim)"."Package Virtual Group" END = VALUEOF(NQ_SESSION."GROUP");
The reason for use of case statement here is, it converts the logical sql to IN Clause, helping us acheive the exact query that we would want.
Please Award points if this helps.
Thanks,
-Amith.

Table.rows.find() returns null in a table where the row exists.

Hi...
I am working in a Project in Visual Studio 2013 where I have to read an Excel report related with a list of business opportunities. Some of the Fields that are involved in it are: Opportunity ID, BU, Account, close date, Account Manager,
Total Value and so on. As soon as I get the conection with the Excel Report, I fill a DataTable and declare the columns [Opportunity ID] and [BU] as my Primary Keys. In that way, an Opportunity value may have one o more rows
with different BU code each of them. In consequence, you can define one row in the table if you specify the [Opportunity ID] and the [BU] values.
My problem starts when I try to get information of those rows that have an specific value of [Opportunity ID]. For that situation I make a "foreach" structure where I check the BU codes that are involved with that Opportunity. So
I use the Find() Method to get the information of the row specified by the Opportunity ID and BU. The first time it goes to find the information it gets the results successfully but in the next cycle changing just the [BU] using the same [Opportunity
ID] value, the find() method returns a "null" and I do not know why because I am sure that the row exists in the table. I have verified the "Unique" property for the [Opportunity ID] and [BU] columns (which are
my primary keys) and they are in false which is OK.
I share the code that I am using...
Hope someone can help.
Thanks.
Alfmar.
void ObtenTotalesxBUs(string Opportunity, string[] BUs, Object[] TotalBUs, Object[] ExpTotalBUs)
ArrayList TotalesBUs = new ArrayList(); //Required information from the row.
ArrayList ExpTotalesBUs = new ArrayList(); //Required information from the row.
foreach(string businessUnit in BUs)
Object[] LlaveBusqueda = { Opportunity, businessUnit }; //Provide values to the Primary Keys.
DataRow RenglonInfo = null;
RenglonInfo = TablaFunnel.Tabla.Rows.Find(LlaveBusqueda); //Find method receives the Primary Keys values. Here is where I have a "null" in return the second time changing just the [BU] field.
TotalesBUs.Add(RenglonInfo["Total"]); //Get the required information from the row.
ExpTotalesBUs.Add(RenglonInfo["Expected Total Value"]); //Get the required information from the row.
TotalBUs = TotalesBUs.ToArray();
ExpTotalBUs = ExpTotalesBUs.ToArray();}

Hi Viorel..
Thanks a lot for you help.
I am absolutely sure that the second ítem of BU is valid and exist in the table because I tried to make a "Select" statement in the table providing the values of [Opportunity ID] and [BU] and I get the expected record. So, why is not
working using Find() with the defined Primary Keys???
I tried this in order to test that the record exists...
if(RenglonInfo == null)
string strSelect = "[Opportunity ID] = '0000218256' AND [BU] = 'SFW'";
RenglonInfo2 = TablaFunnel.Tabla.Select(strSelect);

How to display the data in row wise in smartform

Hi,
    I have to make a modification a smartform of poprinting and i want to display the row wise . At present it is displaying the
    column wise. Actually there is a text which i want to display the data row wise.
    It is possible to display the data in row wise of the text .
Edited by: nav009 on Oct 8, 2009 10:39 AM

Hello ,
I assume that your requiremen is related to smartform.the below is the solution i suggest.
As per my understanding of your requirement ,It's clear that as of now there is some description field which is also getting displayed along with other PO fields.
However you would like to display the description field in a new line since the length of this field is longer than other fields as a result the data is getting scattered .
Therefore one better option could be: since the whole data from PO would be in a loop you can display all other fields in one line type of the table as per the intial requirement and you display the description line alone in a new line type wth the desired length so that data would not be scattered and no data loss would happen.
I assume you are aware of creating of line types for table.
Thanks
M.Naveen.

How to generate unique table row id's in a cfoutput query?

I am trying to implement a jQuery drag and drop table row function to my CF pages but in order to save my "drop" positioning to the database I need to serialize all the table row id's.What coding would I need to add so that after the cfoutput query is run, each table row would have a unique id (ie. tr id="1", tr id="2", etc.)? Thanks.

Utilize the CurrentRow variable that's automatically available within your query output:
<cfoutput query="myQry">
          <tr id="row#currentRow#">
                    <td>...</td>
          </tr>
</cfoutput>
that will give you:
<tr id="row1">
          <td>...</td>
</tr>
<tr id="row2">
          <td>...</td>
</tr>
<tr id="row3">
          <td>...</td>
</tr>
etc...

Regarding Logical level key and row wise initialization

Hi Gurus,
What is the purpose of row wise initialization in external table authentication and when we have to go for row wise initialization.
Why we have to enable logical level key in hierarchy is this only for getting drill down to the next level if we make two columns as logical level key what will happens. If we want to enable a column as a logical level key what are the character sticks that column should satisfy.
Thanks,

1) Row Wise Initialization used to hold multiple values in a variable. Let says SQL gives 4 rows (A,B,C,D) as output. Now I want to hold 4 value in a variable to get this happen we need to go for RowwiseIniziation. If you do not do this at any point in time Variable holds only value A not others. Simply it works as Array.
2) Level keys define the unique elements in each level and provide the context for drill down. You can make two logical columns as logical key but you need to make sure what to be displayed in your hierarchy by selecting DISPLAY. If you make to as separate logical keys and set Display for both you get two columns in the hierarchy
http://gerardnico.com/wiki/dat/obiee/hierarchy_level_based

How 2 Change of column wise o/p to row wise output in ABAP?

Hi all,
I am getting the output in column wise as normally but how can I get the ouput in row wise.in ABAP.
its urgent. can any one help me how to change the output layout?
thanks in advance,
Sakthi.C

if it is normal report .then
go through the write statents . one of that is below
Loop at itab .
write : itab .
endloop.
if it is ALV then you have to define an internal table which are the fieldds you want palce in the Row .
so that
data c type i value    '1'.
loop at itab .
fieldcatalog-fieldname   = itab-field.
fieldcatalog-col_pos     = c.
append fieldcatalog to fieldcatalog.
clear fieldcatalog
c = c + 1.
endloop.
so that the Col_pos will be increased and the Column data will be moved into Row .
reward points if it is usefull...
Girish

How to get the index of table row without selection?

Hi all,
I have an table designed in XML view.Now i have added an change method for qty cell "valqty". When user inputs the qty in the cell and press enter this method is triggered now I want to know which index of the table is currently edited.Through which i can get the value of other cell in the same row.
NOTE: The table row doesn't have selection either multiple or single
I tried the following inside the valqty method but it now working
this.getValue();
this.getBindingContext().getProperty('PRD_NUM');
<Table id="idProductsTable"
inset="false"
items="{oModel>/deliverylist}"
visibleRowCount= "7"
mode="MultiSelect"
modeAnimationOn="true">
<headerToolbar>
<Toolbar>
<Label text="Products"></Label>
</Toolbar>
</headerToolbar>
<columns>
<Column
minScreenWidth="Tablet"
demandPopin="true">
<Text text="Order" />
</Column>
<Column
minScreenWidth="Tablet"
demandPopin="true">
<Text text="Quantity" />
</Column>
</columns>
<items>
<ColumnListItem>
<cells>
<Text text="{oModel>PRD_NUM}" />
<Input value="{oModel>DEL_QUAN}" change="valqty" maxLength="13" />
</cells>
</ColumnListItem>
</items>
</Table>
Thanks

Thanks Robin,
But in my case oEvent.getSource() is returning the cell instance and
oEvent.getSource().getBindingContext() is undefined
Hence not getting the value
I also tried the following
oEvent.getSource().getParent().getParent().indexOfItem()
But index returned is -1

Ajx problem with jsp .not able to show ajax response data in table rows

hi evryone
i m new to ajax .i m not able solve this problem .pls help if anyone understood my problem
probelm scenario is like this:
take a example of shopping page where a field amount changes every time (time interval) ,the amount data is coming from database .ok...
this i m trying to do with ajax and want to display the value in table rows one by one ..but response whihc i m getting is different .....same value is diaplying in evry rows .which i dont want
the output it coming now is:like this
item amount
item 1 20
item2 20
item 3 20
i want like thi s
item amount
item 1 20
item2 30
item 3 40
even in database the value is 20,30,40
here is the code of two jsp page
one is ajaxitem_amount.jsp
<%
try
stmt3 = con.createStatement();
String itemQ="select item_ref_id,quantity from item_master where shop_ref_id="+shopid+" and (status is null or status<>'w') order by item_ref_id";
//out.println(railQ);
rs_details=stmt3.executeQuery(itemQ);
while(rs_details.next())
item2 = rs_details.getInt("ITEM_REF_ID");
v.add(new Integer(item2));
String aString = Integer.toString(item2);
itemids.add(aString);
Enumeration enum = v.elements();
for (j=0; j<v.size(); j++)
//out.println("v[" + j + "] = " + v.elementAt(j));
sql3="select max(shop_amount) from shop_floor_temp where item_ref_id="+v.elementAt(j);
rs_bid=stmt3.executeQuery(sql3);
if(rs_price.next())
last_price=rs_price.getDouble(1);
if(last_price != 0)
lprice= last_price;
else
lprice=1;
out.print("<response>");
out.print(lprice+"|");
out.print("</response>");
out.print("\n");
catch(Exception ex)
out.print("ERROR"+ex);
// out.println("<?xml version=\"1.0\" encoding=\"UTF-8\"?>");
_another is main shopping
<td bgcolor="#C5B9AB" width="10%" align="center">
<strong><font face="Verdana" size="2">Last price</font></strong>
int tabrowcounter=0;
while(rs_details.next())//some query
tabrowcounter++;
//*some more data is displayed here one by one all are working instead of this which i am calling from another page ajaxitem_amount.jsp page*
<td bgcolor='<%=colorjava%>' width="50%" align="center">
<div id="responseimage<%=tabrowcounter%>"></div>
<div id="responseOutput<%=tabrowcounter%>"></div>
<SCRIPT LANGUAGE="JavaScript">
function createXHR<%=tabrowcounter%>()
try { return new XMLHttpRequest(); } catch(e) {}
try { return new ActiveXObject("Msxml2.XMLHTTP.6.0"); } catch (e) {}
try { return new ActiveXObject("Msxml2.XMLHTTP.3.0"); } catch (e) {}
try { return new ActiveXObject("Msxml2.XMLHTTP"); } catch (e) {}
try { return new ActiveXObject("Microsoft.XMLHTTP"); } catch (e) {}
alert("XMLHttpRequest not supported");
return null;
function sendRequest<%=tabrowcounter%>()
document.getElementById('responseimage<%=tabrowcounter%>').innerHTML ="<IMG SRC='load.gif'> ";
document.getElementById('responseimage<%=tabrowcounter%>').style.display = 'block';
document.getElementById('responseOutput<%=tabrowcounter%>').style.display = 'none'
var url="ajaxauct_floor.jsp";
var xhr = createXHR<%=tabrowcounter%>();
if (xhr)
xhr.open("get",url,true);
xhr.onreadystatechange = function()
handleResponse<%=tabrowcounter%>(xhr);
xhr.send(null);
function handleResponse<%=tabrowcounter%>(xhr)
if (xhr.readyState == 4 && xhr.status == 200)
try
var data = xhr.responseText.split("|");
//document.write(data);
//updatePage<%=tabrowcounter%>(xhr.responseText);
//document.write(xhr.responseText);
setTimeout('sendRequest<%=tabrowcounter%>()',10000);
for(var x=0;x<data.length-1;x++)
//alert(data);
document.getElementById('responseOutput<%=tabrowcounter%>').innerHTML = data[x];
document.getElementById('responseimage<%=tabrowcounter%>').style.display = 'none'; // HIDE
document.getElementById('responseOutput<%=tabrowcounter%>').style.display = 'block'
//document.getElementById('responseOutput<%=tabrowcounter%>').innerHTML = data[0];
//document.getElementById('responseOutput<%=tabrowcounter%>').innerHTML = data[0];
catch(e)
alert('1 '+e)
sendRequest<%=tabrowcounter%>();
</SCRIPT>
</td>
</tr></table>
if anyone have understood my problem pls help me .i have tried lot but not working .anyone genius here ?thnak you

thanks baluc
thanks for correcting me and giving me a good advice .anyway i m trying make you understand once again ...
if you have understood this time please do reply .else i m sorry for placing wrong question ....
hi everyone
I m new to Ajax .I m not able solve this problem .pals help if anyone understood my problem
problem scenario is like this:
take a example of shopping page where a field amount changes every time (time interval) ,the amount field* (this data is coming from database )
this I m trying to do with Ajax and want to display the value in table rows one by one ..But response which I m getting is different.....same value is displaying in every rows .which I don't want
The output it coming now is: like this
item amount
item 1 20
item2 20
item 3 20
I want like this s
item amount
item 1 20
item2 30
item 3 40
even in database the value is 20,30,40
here is the code of jsp page
one page is ajaxitemamount.jsp_*
<%
try
stmt3 = con.createStatement();
String itemQ="select item_ref_id,quantity from item_master where shop_ref_id="+shopid+" and (status is null or status<>'w') order by item_ref_id";
//out.println(railQ);
rs_details=stmt3.executeQuery(itemQ);
while(rs_details.next())
item2 = rs_details.getInt("ITEM_REF_ID");
v.add(new Integer(item2));
String aString = Integer.toString(item2);
itemids.add(aString);
Enumeration enum = v.elements();
for (j=0; j<v.size(); j++)
//out.println("v[" + j + "] = " + v.elementAt(j));
sql3="select max(shop_amount) from shop_floor_temp where item_ref_id="+v.elementAt(j);
rs_bid=stmt3.executeQuery(sql3);
if(rs_price.next())
last_price=rs_price.getDouble(1);
if(last_price != 0)
lprice= last_price;
else
lprice=1;
out.print("<response>");
out.print(lprice+"|");
out.print("</response>");
out.print("\n");
catch(Exception ex)
out.print("ERROR"+ex);
// out.println("<?xml version=\"1.0\" encoding=\"UTF-8\"?>");
another is main shopping page page 2*
<td bgcolor="#C5B9AB" width="10%" align="center">
<strong><font face="Verdana" size="2">Last price</font></strong>
int tabrowcounter=0;
while(rs_details.next())//some query
tabrowcounter++;
<td bgcolor='<%=colorjava%>' width="50%" align="center">
<div id="responseimage<%=tabrowcounter%>"></div>
<div id="responseOutput<%=tabrowcounter%>"></div>
<SCRIPT LANGUAGE="JavaScript">
function createXHR<%=tabrowcounter%>()
try { return new XMLHttpRequest(); } catch(e) {}
try { return new ActiveXObject("Msxml2.XMLHTTP.6.0"); } catch (e) {}
try { return new ActiveXObject("Msxml2.XMLHTTP.3.0"); } catch (e) {}
try { return new ActiveXObject("Msxml2.XMLHTTP"); } catch (e) {}
try { return new ActiveXObject("Microsoft.XMLHTTP"); } catch (e) {}
alert("XMLHttpRequest not supported");
return null;
function sendRequest<%=tabrowcounter%>()
document.getElementById('responseimage<%=tabrowcounter%>').innerHTML ="<IMG SRC='load.gif'> ";
document.getElementById('responseimage<%=tabrowcounter%>').style.display = 'block';
document.getElementById('responseOutput<%=tabrowcounter%>').style.display = 'none'
var url="ajaxauct_floor.jsp";
var xhr = createXHR<%=tabrowcounter%>();
if (xhr)
xhr.open("get",url,true);
xhr.onreadystatechange = function()
handleResponse<%=tabrowcounter%>(xhr);
xhr.send(null);
function handleResponse<%=tabrowcounter%>(xhr)
if (xhr.readyState == 4 && xhr.status == 200)
try
var data = xhr.responseText.split("|");
//document.write(data);
//updatePage<%=tabrowcounter%>(xhr.responseText);
//document.write(xhr.responseText);
setTimeout('sendRequest<%=tabrowcounter%>()',10000);
for(var x=0;x<data.length-1;x++)
//alert(data);
document.getElementById('responseOutput<%=tabrowcounter%>').innerHTML = data[x];
document.getElementById('responseimage<%=tabrowcounter%>').style.display = 'none'; // HIDE
document.getElementById('responseOutput<%=tabrowcounter%>').style.display = 'block'
//document.getElementById('responseOutput<%=tabrowcounter%>').innerHTML = data[0];
//document.getElementById('responseOutput<%=tabrowcounter%>').innerHTML = data[0];
catch(e)
alert('1 '+e)
sendRequest<%=tabrowcounter%>();
</SCRIPT>
</td>
</tr></table>
if anyone have understood my problem please help me .i have tried lot but not working .anyone genius here ?thank you

How to get more table rows to appear on form

I'm looking for a way to have more table rows appear on the actual form. I created a table with one header and one row with the add and delete button option. I like how the purchase order form sample has it setup where in designer it shows one row and then on the form it appears the table has three rows to start with. How do I do that? I looked at the code on the sample and I couldn't find it anywhere. Please help, thanks.

Hi,
The first part is easy to set up. If you select the object and go to the Object > Field palette. There you can click on display pattern and insert a null pattern, like "Name".
When the field doesn't have data, it will display "Name", but as soon as the user clicks in, this will automatically disappear.
The slight glitch is that by default this 'caption in the field' has the same text style as the rawValue, typically Myriad, black 10pt.
To achieve a grey, italic font to the null values, will require a little script.
If you look at page 2 of this example you will see how I have set up the three fields on the right:
http://www.assuredynamics.com/index.php/category/portfolio/laying-out-form-objects/
Hope that helps,
Niall
Assure Dynamics

How to Fetch Data into internal table column wise?

The internal table contains huge set of data. Normally we fetch the data row wise using insert and select statements in work area.
But, the requirement is on fetching the data column wise for each field from the database.
So,can anyone help me on this issue for fetching the data column wise?

Welcome to SDN.
What you want to do(if I understand correctly) is not possible with the statements available to us. You could do it, but I think it would be a lot of code and I don't think that its worth it. Why exactly do you want to do this?
Regards,
Rich Heilman

Display result Cloumn wise to Row wise

create table t(table_id number primary key, Grade_id number, Value number);
insert into t values(1,77,11);
insert into t values(2,77,12);
insert into t values(3,77,13);
insert into t values(4,88,14);
insert into t values(5,88,15);
insert into t values(6,88,16);
insert into t values(7,99,17);
insert into t values(8,99,18);
insert into t values(9,99,19);
commit;
select * from t;
TABLE_ID GRADE_ID VALUE
1 77 11
2 77 12
3 77 13
4 88 14
5 88 15
6 88 16
7 99 17
8 99 18
9 99 19
9 rows selected
Question : I want my output ROW WISE
for eg.
TABLE_ID 1 2 3 4 5 6 7 8 9
GRADE_ID 77 77 77 88 88 88 99 99 99
VALUE 11 12 13 14 15 16 17 18 19
Is this possible ?

hi
u can use this function to convert rows into cols
CREATE OR REPLACE
FUNCTION rowtocol( p_slct IN VARCHAR2,
p_dlmtr IN VARCHAR2 DEFAULT ',' ) RETURN VARCHAR2
IS
TYPE c_refcur IS REF CURSOR;
lc_str VARCHAR2(4000);
lc_colval VARCHAR2(4000);
c_dummy c_refcur;
l number;
BEGIN
OPEN c_dummy FOR p_slct;
LOOP
FETCH c_dummy INTO lc_colval;
EXIT WHEN c_dummy%NOTFOUND;
lc_str := lc_str || p_dlmtr || lc_colval;
END LOOP;
CLOSE c_dummy;
RETURN SUBSTR(lc_str,2);
END rowtocol;
rgds
Ashish

Animate table row-wise in arbitrary order

Similar Messages

Maybe you are looking for