802.1x on a wired Lan Connection

Dear Community,
i have the job to connect a Windows CE 6.0 device to a Network (wired) with 802.1x. The switch to wich i connect the device  is operating as authenticator and the Wince device is the supplicant. A Radius Server with AD is also present .
All the informations and samples  that i can find are relating to wireless LAN connections (WZCSVC). A description of the EAPOL API is also absent (or i was not able to find it).
I'm afraid that Wince 6.0 is not prepared for using 802.1x over a wired connection like Win XP can, but i'm not sure about that. I can not find a definite  statement whether it is possibe or not.
Does anybody know if it is possible and/or how i can solve this problem.
Regards Achim

Community,
anybody has answer to this problem?  I have to do the same thing...
Achim,
did you solve this problem?Thank you
in advance for any help you
can provide.
Regards Bruno

Similar Messages

  • Disable Wireless on Wired LAN Connection

    Hi,
    Right Now, my macbook pro use my ethernet and my wifi at the same time and i don't want that. Is there a way to say to my macbook pro to stay only with my ethernet connection when my cable is plug in it and no wifi come by? (I travel a lot with my mac and i cannot just do Turn Off / ON Wifi each time i plug ny cable in my mac)
    Thanks in advance

    The issue with what everyone suggests is that your computer STILL obtains 2 IP addresses. If you have 4 laptops in the family thats 8 IP's.. if you're in a workplace of 30 people thats 60 IP's for 30 systems.. doesn't matter if they are being 'used' or not. it's a huge waste of network resource.
    Thats a HORRIBLE way to manage your resources. Plus, it wastes battery maintaining a connection it doesn't use.. Thats just silly! Apple truly does need to address this.. Even Dell laptops disable wireless connectivity (turns wifi on for GPS as needed, but keeps from connecting) while wired is connected.

  • Strange: just lost use of Built In Internet (LAN) connection!

    Greetings,
    I was just switching from wireless Airport connection to Built In internet (wired/LAN) connection (I do that to insure more reliable large downloads, software updates), and I realized that upon Turning Off Airport, I was not getting automatic connection to the built in NIC, as I do usually. I checked Preferences >>> Network, and observed that the built in connection was "inactive". I am not sure how to activate it again. LAN cable is OK, internet connection and modem OK, etc...
    I'll appreciate refresher!
    - Roger T

    sig, thanks a lot for your prompt reply... I had restarted the system indeed.
    I got to start looking deeper into seldom visited settings... And I found one that fixed the problem.
    I went to "System Preferences" >>> "Network" >>> observed that the "Built In Internet" was INACTIVE >>> clicked on the smal, gear-like button at the bottom, right next to the "+" and "-" buttons. AND, lo and behold, by making the "Service Active", I restored the Built In Internet" connection.
    Man, go figure what disconnected it in the first place! I just drew a blank initially!
    Thanks again... Sometimes, one needs a prod
    - Roget T

  • Can't detect or print to C8189A All-in-One-Printer on a wired LAN

    Computers on my home wired LAN repeatedly but intermittently stop being able to print to the HP C8189A printer attached via wired LAN connection.  I began trouble shooting last night and uninstalled all HP software to start afresh.
    I cannot print to my HP C8189A all-in-one printer conected to a wired network from my desktop PC running Windows XP with SP3.  I can see the printer has pulled an IP from the router by looking at the router's attached client list.  I can ping the printer at its assigned LAN IP address.
    My desktop pc and the C8189A printer share a common DLINK Gigabit Switch which connects wired wired LAN to the DLINK router.
    I uninstalled and reinstalled all HP software but during the HP Solutions Center software reinstall it could not find the PRINTER on the lan, even when inserting the Printer's assigned IP address.
    When checking the network configuration from the printer, it confirms that it is has the correct IP address, but the HP software still cannot detect it.  I have pulled the power connector from the back of the power a couple times to RESET the printer.  This usually corrects what is now a terribly frustrating problem accessing the printer.
    Additional factoids: 1) other PCs can print to this printer, 2) SPYBOT Search & Destroy is running on my PC and popped some registry change windows during the install.
    I'm running out of ideas - any suggestions please?
    Message Edited by VARocketry on 01-09-2009 11:54 AM

    Hmmm ... this is interesting.  In review:
    You can print intermittently from your XP SP3 box to the OJP L7680.
    Disabling the SW firewall (Norton/Symantec, Zonealarm, McAfee, etc) on the SP3 PC doesn't help.
    Other computers on your network have no problems printing to the OJP L7680.
    You are running a wired (Ethernet) network.
    Did I get this right?  I'd like to ask a few more questions:
    What are the other types of computers on your network and what firewall do they run?
    The next time your XP SP3 computer has trouble printing to the OJP L7680, try to access the printer's internal web page.
    What are the IP addresses of the other devices on your network?  By chance, is there a duplicate address on your network?
    Finally, you can try adding the print driver manually to see if we can get you printing.  This is the sequence for XP: 
    Click "Start" button --> Printers and Faxes.
    Under Printer Tasks, click "Add Printer".
    Click "Next" button on the first Add Printer Wizard window.
    If the option for Local or Network printer appears, select "Local printer attached to this computer" and deselect  the "Automatically detect and install My Plug and play  printer" option.  Click "Next".
    Under Select a Printer Port option, select "Create a new port" and select "Standard TCP/IP Port"  and click "Next" button.
    In the "Welcome to the Add Standard TCP/IP printer port wizard" make sure that the printer is  turned on and configured. Click "Next" button.
    Under "Add Standard TCP/IP Printer Port" enter the printer's host name  (that is the hostname of printer that printed in network configuration page)
    under "Additional Port Information" select "Standard". Click Next, and then click Finish.
    Now, select HP from the list of manufacturers, select your printer from  the list of Printer models  and click 'Next' button.
    The Printer name will be highlighted on the next window.
    Click "Next" button.
    It ask for the Printer name -- leave it as is.
    Select "Yes" option for making the printer default.
    Click "Next" button.
    The Printer Sharing dialog box will open.
    Click "Next" button.
    The Print Test Page box appears.
    Select "Yes" option to print a test page.
    Print Test Page.
    Completing the Add Printer Wizard box appears.
    Click "Finish" button and wait for the files to copy 
    This should work to get you a print queue for your XP box.
    Regards / Jim B
    Regards / Jim B / Wireless Enthusiasts
    ( While I'm an embedded wireless systems engineer at work, on this forum I do not represent my former employer, Hewlett-Packard, or my current employer, Microsoft )
    + Click the White Kudos star on the left as a way to say "thank you" for helpful posts.

  • Access Connection​s fails to recognize DNS server for wired Ethernet connection​s

    I'm running Windows 7 on a Thinkpad T410i.  I ran the Lenovo update yesterday which updated Access Connections from 6.01 to 6.21.  I then could not make any network connections to the Internet.  I used Windows System Restore to back out the changes made by the Lenovo updater. 
    Since then, I am able to connect to the Internet using the wireless adapter, but the wired LAN connection fails to connect to the Internet because it doesn't recognize the DNS servers  The wired LAN adapter is the Intel 82577LM Gigabit Network Connection.  The IP v4 configuration settings haven't changed (use DHCP, obtain IP and DNS addresses automatically), but it can't seem to connect to the DNS servers. 
    The message from Windows Network Diagnostics is:
    Your computer appears to be correctly configured, but the device or resource (DNS server) is not responding. 
    The symptoms appear the same as in this problem in the Lenovo support library, but that was occuring with Access Connections 2.60, a much earlier version of the software:
    Network connection is not working if Access Connection is used to set DNS information - ThinkPad General
    Symptom
    When a wired (Ethernet or Token Ring), network profile is created with Access Connections v2.60, the user may be unable to connect to a LAN or the Internet.
    Affected configurations
    Any model ThinkPad system using Access Connections v2.60
    Does anyone have any suggestions?  Thanks!
    Michael

    pariswd wrote:
    Hello Lenovo?  Are you hearing us?
    Welcome to the forum!
    Yes, some Lenovo employees do read and post to this forum.  Mark is quite active, and several others post as well.  In addition, there are lurkers who just read without making public comments although sometimes they ask the mod team to either gather more information or pass along advice.
    However, here are the expectations of their participation from the Welcome message:
    These communities have been created to provide a high quality atmosphere in which users of Lenovo products and services may share experiences and expertise. While members from Lenovo may participate at intervals to engage in the discussions and offer advice and suggestions, this forum is not designed as a dedicated and staffed support channel.
    The bottom line is there's no guarantee that you will get an answer to a question here directly from Lenovo. 
    On the other hand, you just might!  ;-)
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество
    Jane
    2015 X1 Carbon, ThinkPad Slate, T410s, X301, X200 Tablet, T60p, HP TouchPad, iPad Air 2, iPhone 5S, IdeaTab A2107A, Yoga Tablet, Yoga 3 Pro
    I am not a Lenovo Employee.
    I AM one of those crazy ThinkPad zealots!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!

  • No "Wake for network access" over wired LAN

    Hello,
    I could not get “Wake for network access” to work over wired LAN connection. If I have WiFi enabled as well, or WiFi is the only network interface enabled the “Wake for network access” works fine. However, my Mac Pro is not responding to when I am trying to reach it remotely if only the wired Lan connection is used.
    Mac Pro 6-Core 3.33GHz 24GB RAM, latest updates, Snow Leopard, “Wake for network access” enabled in Energy Saver settings.
    It seams to me, that it was working some time ago.
    Can anyone suggest me places to look to, settings to check, commands to run ..... to get it working?

    Thank you Grant Bennet-Alder for responding. I will try to describe it as step-by-step as possible.
    - I have back to my mac enabled with screen and file sharing on my Mac Pro
    - By default I use wired NIC to connect my MP to network with manual configuration. (I have tried enable DHCP for that interface, however, the result was the same)
    If I need to reach files on my Mac Pro (while I am away from it) from my Macbook Pro, I open finder on my MBP where I see my Mac Pro. I click on it if I need to access files or use "Share screen..." button if I want to access MP screen. I have the same result if I try to enter vnc://xxx or afp://xxx
    my MBP tries to reach MP and brings the message after some time: Connection failed to "xxxxx" Please make sure the screen sharing is enabled....."
    I have no problems remotely accessing my MP if:
         - it is not sleeping (i.e. I ask someone at home to touch its keyboard to wake it up)
         - I have AirPort turned on on my Mac Pro
    I could not access my Mac Pro if:
         - it is sleeping and AirPort is off (the only wired NIC is used to connect to LAN)
    It does not matter am I trying to get screen/file sharing on local network or via internet - the result is the same - if the only wired connection to network is used and MP sleeps - no access.

  • IPhone wired internet connection

    I would like to use the internet on my iPhone at work, but wifi is not allowed and cellular coverage is almost non-existent.
    Is there any way to connect my iPhone to the internet via my wired LAN connection?
    Or to set up a Bluetooth connection between my iPhone and my LAN?

    Nice idea - these petacell devices coming onto the market require the phones to be registered on the station to stop people leeching off your broadband connection, so you could find a few people who would contribute to the cost of the device and share the cost and benefit.
    The only place I have seen full commercial versions is on Vodafone in the UK - called Vodafone Sure Signal.

  • LAN Connection Error: Panasonic DMP-BD35 Blu Ray Player

    Hello,
    My Panasonic DMP-BD35 Blu Ray player has a wired LAN connection port that is used to download firmware updates.
    When I was using a DLink WBR-2310 with Verizon DSL the system worked perfectly with the BD35 player wired to a LAN port on the DLink router. I recently switched to Verizon FiOS and now the BD35 player is wired to LAN port 2 on the FiOS wireless router.
    The BD35 is no longer able to connect to the network now that it is wired to the FiOS router. When I run the connection test an error is returned, "Cannot obtain IP Address using DHCP." However, all of my other network devices (Wii, Laptops, Desktops, Print Router, etc.) have had no problem connecting to the router, both wirelessly and wired. I have even wired a laptop to the jack that the BD35 is using and the laptop connects just fine (wireless turned off). Also, I checked the Port Configuration screen on the router and Port 2 is showing that it is connected at 100Mbps Full-Duplex when the BD35 is on, but the device does not appear on the list of devices connected on the My Network screen.
    Here are the settings on the BD35:
    - IP Address Auto Configuration (DHCP) = ON
    - DNS Auto Configuration (DHCP) = OFF
    - Auto Detect Connection Speed = ON
    Does anyone have experience with this issue? Is it possible to setup a Static IP for the BD35 in the router using the MAC Address for the BD35?
    Thank you!

    I'm not familiar with the Panasonic BD35 but I would suggest that you try it with DNS Auto Configuration turned on.
    You may also be able to set it up with a  manual address that is way out of the range of anything that you woudl normally use. 
    Try the following:
    Check the TCP/IP Address that your PC is getting.  Assuming your IP Address is set to 192.168.1.x set the Panasonic to
    IP Address: 192.168.1.200
    Subnet: 255.255.255.0
    Gateway: 192.168.1.1
    DNS: 192.168.1.1
    The Verizon STBs will use 100 to 150 and your other DHCP Devices woudl normally use the addresses between 2 and 99.
    If you still have problems try using OpenDNS and set the DNS address to 208.67.222.222.
    If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it.
    If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

  • Cisco ACS 5.1 802.1x auth fails on LAN when WLAN connected

    I am running Cisco ACS 5.1 802.1x with certificate based authentication for Wired and Wireless connections. The issue that I am having is that when a user comes in from home with their laptop the wireless connection works, they pass the authentication and have network access fine. But when the plug the laptop into a docking station the LAN connection fails and gets put in the Auth Failure Vlan. 
    A reboot of the phone/ shut/no shut fixes this, but I really need to find a resolution
    This is an intermittent fault and only effects users with both LAN and WLAN enabled.
    Running ACS 5.1.0.44, all Cisco 3750s - c3750-ipservicesk9-mz.122-55.SE.
    Certificates are issues by group policy and only using computer authentication.
    any help would be greatly appreciated
    Thanks

    After a long TAC case with Cisco we discovered that the Mitel phone was not sending the EAPoL-Logoff packet so the switch still thought that the device off the back of the phone was connected.
    There are no EAPoL-Logoff messages seen on switch when laptop is disconnected/port is shut down.
    http://www.cisco.com/en/US/docs/solutions/Enterprise/Security/TrustSec_1.99/Dot1X_Deployment/Dot1x_Dep_Guide.html#wp386903
    This feature is supported by most IP phones -  I do not know if Mitel phones support that but we cannot see this message in the debugs you sent.
    As a workaround we can configure inactivity timer (by default it is infinity):
    http://www.cisco.com/en/US/docs/switches/lan/catalyst3750/software/release/12.2_55_se/commmand/reference/cli1.html#wp11888691
    This did resolve all our issues,
    Aaron

  • How can I get my wired LAN to share my iMac's wireless internet connection

    Hi. (sorry for the long-winded posting below. I really struggled to explain what I'm trying to do, but would really appreciate any help from people who can recognise what I'm aiming for!)
    I've seen several postings about sharing internet connection, but none (I think) which sort my problem.
    I have a wired LAN with 3 Macs connected to a router, and the router to a cable modem and the internet. All working fine. All Macs have internet access.
    I'm considering ditching my broadband provider, and so looking for a replacement configuration, at least for the short term.
    So, I'd like to change the arrangement, connecting one of the Macs to the internet (through a local free WIFI hotspot) using it's airport card (that bit is done) and enable the other two Macs to share that connection via the router.
    I've turned internet sharing on, and share connection from Built-In ethernet, on the internet connected Mac. But whatever
    Has anyone got this setup working?
    PB
    Intel iMac 4,1 (early 2006)   Mac OS X (10.4.8)   1Gb SDRAM, 2GHz

    You can share a connection through the router or you can share a connection from the Mac via Internet Sharing, but you can't share an already shared connection.

  • [Solved] Failed to connect internet by Wired LAN, but wifi is working.

    After installation of gnome in archlinux, I enabled NetworkManager.service. I can successfully connect to wireless network. But I can't connect to internet through wired LAN. It shows wired connection established in NetworkManager. But no internet connection is accessible. I found that when connected to wired network, running "dhcpcd" in terminal shows messages like "dhcpcd[13584]: enp19s0: reject NAK via 192.168.1.1" and finally timed out.
    Can anyone give any suggestion ?
    Last edited by rasr11 (2015-04-12 01:50:44)

    It seems like a problem in dhcp, you could try setting a static route in network manager, just copy the route of your wifi conection. TheSaint was asking for the output of the shell commands posted by him to diagnose the network problem.
    Last edited by hydrosIII (2014-11-06 06:11:09)

  • 802.1x Authentication on Wired and Wireless LAN

    I have successfully configured 802.1x authentication on wired and wireless Lan. We have Cisco Switches, ACS SE and Windows AD.
    But i have one issue regarding the Single Sign on while authentication using the 802.1x with Windows Active directory the users that are login first time not able to logon but the users that have their profiles already existed in their PC then there is no issue and they successfully authenticated and login easily.
    Is there any way of login successfully for the users first time using 802.1x authentication with Windows AD like a Single Sign On?

    We ran into the same situation from time to time. We implemented 802.1x authentication using the Cisco Secure Services Client (SSC) on the windows hosts.
    At the beginning we were completly unable to logon on the maschines where no locally stored windows profile exists. After change to timeout to authenticate at the network in the SSC options we are able to logon to the network and also be authenticated by the domain controller.
    Sadly this works out often as a timing issue. Most times the user needs to try a couple of times. At the moment, I'm also very interessted in a good way to avoid this (as it seems to be) racecondition.
    Hope that someone else has any clue?

  • 802.1x supplicant authentication using a wired LAN.

    We are in the process of creating a test enviroment to test 802.1x within our organisation.
    We have a mixed Windows/OSX client enviroment and a W2k3 backend structure (Active Directory, Radius).
    Phase one of the testing invloves wired only connections and authentications. The windows clients authenticate fine with the Radius server, which is connected to our test Active Directory.
    The OSX clients (10.3.9, 10.4.3 and 10.4.11) have been bound to active directory and users can login ok if 802.1x is turned off.
    When 802.1x is turned on the users can authenticate ok using the internet connection app to setup an 802.1x session.
    However, it would be advantageous if we could also get the MAC to authenticate itself as a known system before any users log in (the Windows clients do this already).
    Is this possible for OSX?
    Is it because we are using Active Directory for the Macs?

    Did you ever figure out a resolution to this? I'm facing the same problem. 802.1x authentication does not work for the system profile and I have to login and manually click the connect button for 802.1x.

  • Implementing IEEE 802.1X Standard over wired Ethernet LAN

    I'm trying to implement the 802.1X Standard on a wired LAN. Basically it is the EAP authentication mechanisms (like EAP-TLS, PEAP-MSCHAPv2) over the LAN(EAPOL). I've included the EAP Catalog items into my project but found out that the api's exposed by the
    eap DLL's are used by RAS. Remote Access service(RAS) I believe uses the Point to Point protocol which is different from EAPOL.
    Comparing to wireless, it seems there is a 802.1x Authentication module within the
    Native 802.11(Wireless) framework(http://msdn.microsoft.com/en-us/library/gg158436.aspx)
    I would just like to know if any Platform\BSP changes or implementations can be made to support EAP Authentications over Wired LAN?
    Thank You
    Regards

    Community,
    anybody has answer to this problem?  I have to do the same thing...
    Achim,
    did you solve this problem?Thank you
    in advance for any help you
    can provide.
    Regards Bruno

  • Wired LAN

    Ok, first off, I understand that I'm probably a serious minority. Now, that out of the way, I am working to minimize the "wireless" devices in my home, especially the devices that my kids spend significant time with. I'm not here to begin an argument for or against wireless, but I would like to see an IEEE 802.3 LAN connection for the iPad. The iPad looks like a wonderful product that has superb potential for my kids. I would love to have 3 or 4 iPads in the house. Unfortunately, without the ability to disable wireless and go wired for my network connections, I just don't see that I will buy even 1 iPad.

    Agreed.  To those who say it's no big deal because we have microwaves all around us in our environment, both natural and manmade, etc., i say this:  The concept of critical mass, or the straw which broke the camel’s back, is ancient.  That's because there’s truth in it.  Our bodies are designed to accommodate the naturally occurring background radiation.  And while we can withstand a moderate increase over background levels without dropping over dead, the effects of chronic long-term exposure aren't well understood nor researched. 
    Given the dramatic rise of so many previously (a century or so ago) obscure health conditions (e.g. autism, alzheimer’s, heart disease, cancer, etc.), it's clear that these have causes rooted in our modern environment.  No doubt some of these are caused by the changes to our diet and exercise patterns, or exposure to toxins like pesticides, herbicides, dry cleaning chemicals, etc.  Some could be related to air or water pollution, fallout from above ground nuclear detonations of the mid-twentith century, power plant meltdowns, etc.  And some could be related to a chronic increase in electromagnetic radiation of various frequencies.  Nobody knows for sure.  Although a lot of spin doctors want you to believe it's not from their products.
    One other point:  wired communications are also intrinsically more secure.

Maybe you are looking for