Annoying screen appears everytime when calling another html page.
i deployed my form application onto the web successfully. But
there's one screen (Oracle Developer Server R6i) appearing every
time I go to another page.
For example: I have 2 forms A and B, each has its own html page
containing Applet tab. The application starts from A.html, and
A will call B.html. This oracle screen displays all the time
when i click back or forward.
How can I eliminate it?
Thank you for your answer.
The reasons I want to use web.show_document are:
Firstly I don't know how to close the calling form when open the
called form. The code works in client/server env, but it just
hangs there on the web.
Secondly, I hope to use the web back button to return to the
previous form.
Is there anyway i can do to eliminate the splash screen and
function well?
My guess is that you are talking about the splash screen that
you can disable with a paramter in the HTML file.
But this will not happen if you use normal CALL_FORM or
OPEN_FORM buil-in in forms to activate one form from the other.
Don't use web.show_document to open a new form it will only work
slower that way.
Similar Messages
-
It all started when i tried to update to iOs 6 but then, my battery drained. I charged it (va power source) and waited for the red battery bar icon to appear. However, it did not appear. Instead a CONNECT TO THE ITUNES screen appeared even when i'm not connected to a laptop. It was stuck there. When i turned it off and on again, the same screen appears even my iphone is not connected to any kind of power source.
What should i do?
i tried turning it off and on again
tried restarting it by pressing the wake button and the home button (a lot of times already), still the same
i tried restoring it (noe effect)
pls help me
I bought the iphone in another country, i'm not sure if apple can repair it in my countryi tried to connect it but it didnt work...nothing changed...
-
BPM - Crate new Transactio - Error when call another BPM
Hi,
I have an XI application with BPMs and the XI with SP8.
The fist BPM has transformations and send steps and calls the second BPM.
In the DEV environment we are applying SP12, now it's possible to disable the option "Create New Transaction" for Send and Transformation.
I need to disable this option because, my application woks with bad performance and use 100% of the workprocess all the time.
So, when I disabled this option, "Send Stets" whose call another BPMs didn't work fine. The transformations steps and send steps to R/3 worked fine.
Does anybody know why send step to another BPM doesn't work when call another's BPMs?
Best Regards,
FernandoInteresting issue. Have never tried it personally and currently working on a SP 16 XI 3.0 system else would have given this a shot.
If you do get an updates on this issue, pl let us know
Regards
Bhavesh -
EX60 delays from 10 to 30 sec when calling another device
This Terminal EX60 Works OK, but the only thing is that when calling another device takes too long for the other device to receive the call. This EX60 is registered to CUCM 10.5.1 and its firmware is tc7.2.0
ANY HINT?
Thanks so much for any help.Are you dialing URI or extensions? If its extension, do you see some delay when dialing from a SIP phone on CUCM? You "might" be experiencing some post dial-delay. Try assiging an extension a URI and call this URI directly and see if you have a delay.
-
Webdynpro call another web page
Hi experts,
can my webdynpro call another web page? I need that the webdynpro call a pop-up to another web page and when this page is closed a variable returns to webdynpro to process.
Is this possible?
Thanks in advance,
DavidHi,
I've found a popup tutorial to webpage and work's fine ... only the first side of my aplicaton.
I can open a separate web page using:
wdComponentAPI.getWindowManager().createExternalWindow("http://www.google.de","Google - Search for an email address",true).open();
in this class, the "createExternalWindow" method have a boolean parameter to indicate if the window is modal or not ....
I asign this page on a modal=true but I cannot receive from my webdynpro possible events or variables.
sniffff.
David -
Include a html page in another html page
How do I include a html page in another html page? I have 7
separate page making up a website. I made a separate page for the
bottom navigation which I want to include for each page. Instead of
making up a separate nav bar for each page.
Thanks for your time.
Todd DignanJust remember that the file being included CANNOT be a
stand-alone HTML
page - it must not contain <html>, <head>, or
<body> tags if you want to
continue working within DW.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"nX07" <[email protected]> wrote in message
news:fm9pvr$rn6$[email protected]..
> Hey Todd,
>
> Depending on your web site's server environment, you can
do it a few ways.
>
> First, and most convenient is if the server you are on
has PHP, the simple
> php
> include function will do the trick.
>
> Just place this in where the HTML would actually go for
the footer
>
> <?php include("fileofthebottom.html"); ?>
>
> If you don't have PHP, you should be able to use SSI
(Server Side
> Includes).
> same principle applies as above, and is simple to
understand:
>
> <!--#include file="fileofthebottom.html" -->
>
> If for some reason you can't do SSI, the other option
would to be using a
> frame or iframe, which is not recommended for several
reasons; mainly
> accessibility.
>
> The simple code is:
> <iframe src ="fileofthebottom.html"width="whatever"
> height="whatever"></iframe>
>
> Hope this helps :)
>
>
> -
Passing to an another HTML page after animation finished
My question in english:
Hello, good morning,
I have created a Flash animation with Flash 8 and I have exported it in HTML format.
I would like that at the finishing animation, there is an automatical transfer to another HTML page of my choice (for example after xxx seconds), like we could see in the web (redirection in fact). I would have also the possibilty to put an "Skip Intro" link in the animation page for people that don't want wait the final of animation.
How make this operation with Flash 8 directly or I must write an HTML code in it to this operation.
Thanks a lot for your answer and helping
Ma question en français:
Bonjour,
J'ai créé une animation Flash avec Flash 8 et je l'ai exporté au format HTML. Je voudrais qu'à l'issue de l'animation, à la fin de cette animation, il y ait passage automatique (au bout de x secondes par exemple) à la page web de mon choix (une redirection en quelque sorte). J'aurais la possibilité dans la page contenant l'animation de mettre un lien "Skip intro" pour les internautes qui ne voudraient pas attendre la fin de l'animation pour consulter mon site web.
Comment faire pour faire cette manipulation, est-ce possible directement dans la création de ma page en Flash ou dois-je mettre un bout de code HTML pour que cette transition se réalise?
En vous remerciant pour votre réponse et votre aide.It depends on which version of Actionscript your file is using.
For an AS2 file you use getURL() to link to a web page. You could use the setTimeout() function to delay triggering the getURL() call.
For AS3 you use navigateToURL() to link to a web page. You could use the setTimeout() function or the Timer class to delay triggering the navigateToURL() call.
In both cases you could place the call to the linking function inside another function that you call either using the delayed calls of the functions mentioned, or using a button to call the function for the skip intro. -
Call a html page from a applet
did somebody can tell me how call any html page to display in the current window of the browser when the user push a Button in one applet
http://forum.java.sun.com/thread.jsp?forum=31&thread=566530&start=1&range=1
or
http://forum.java.sun.com/thread.jsp?forum=31&thread=566059&tstart=0&trange=100 -
How to call an HTML page from a JSP
Hi,
I am getting problem in calling an html page from a jsp
The Sample code is
int rowsAffected = stm.executeQuery("Select * From Table");
if (rowsAffected == 1)
{ %>
<jsp:forward page="xyz.html" />
<%See the other forum where you asked the same question http://forums.java.sun.com/thread.jsp?forum=45&thread=158981
Please refrain from cross posting. -
Call other html page on using a java applet!!
Can I call other html page using a function into a java Applet? Please, somebody reply!!!
How can i do? Explain!! Thanks...
-
Calling a html page deployed in weblogic server using RequestDispatcher
Hi All,
I want to call a HTML page from a java page using requestdispatcher. The whole application is deployed in Weblogic server.I have used the below syntax to call the page from any machine..
ServletContext sc = getServletContext();
RequestDispatcher rd = sc.getRequestDispatcher("http://172.25.40.148:7001/Filecomparetool/Result3.html");
rd.forward(req, res);
Im getting Null pointer exception...Plz help..Thanks in advance!Please use the CODE tags (see the CODE button above, or the formatting tips page, and not the BOLD button.
Post the stack trace.
Either getServletContext or getRequestDispatcher is returning null. Find out which, read the API to find out why. -
Use subflow or redirect step when calling another script
I have a main AA script and it calls another script when caller press option 6. When a caller presss 6 it is only transferring the call to the sub script. it does not return any values to the main script.
In this situation, is it better to use subflow or redirect step. i am think redirect step but just want to check with the user community.
thanks in advance.Either will work. Here are a few thoughts to consider in no particular order:
Subflows count toward the originally triggered scripts' maximum step count. If you have a lot of steps, this may result in an exception. Redirecting the call restarts this counter since the newly triggered script will have its own counter.
NOTE: You might think that this is exactly why the Trigger Application step in Synchronous mode was created for. Alas, there is a bug which renders this useless in 7.0(1): CSCtd72562
Redirecting the call will result in the user hearing ringback. This would occur because of the recommended two-second delay step following the Accept step of a step to prevent a race condition. I find this to be irritating enough to shy away from it mid-way through an IVR if possible.
Subflows are more difficult to debug. You need to have sufficient code embedded in them such that you can trigger and reactively debug them.
Be sure that the redirect destination of an actual CCX Trigger (CTI Route Point). Do not set it to a value in UCM that is translated or forwarded back to CCX. This results in a race condition which CCX does not handle well.
If you were asking me as an individual my answer would be this: Is the code small enough and not reused elsewhere? If yes, then put it in the first script and avoid this topic all together. If it's reused in a bunch of places from multiple scripts and does not represent a large quantity of steps: use a subflow. Otherwise use Trigger Application if you're on a new enough version or Call Redirect if you're not. -
Form exits when calling another form
I have a form that passes parameters to another form. When creating new records and then calling the other form, it works fine. However, when coming from a post query and then passes parameters to a new form, the form exits upon calling of the other form. What causes this? Thanks for your help. I am using Forms Developer 6.0
Edited by: user6656248 on Apr 14, 2009 8:30 PMMy form is intermittent, when creating new records, sometimes the other form is called and parameters are passed but sometimes nothing happens and there are no errors. But from post query, calling another form and passing parameters exits the calling form and the called form does not show up. This form calls another form and passes some parameters without problems but when I tried to call another one, those scenarios happen. I am confused because the codes on both my When-Button-Pressed trigger are 100% similar. I dont know why this happens on this one and NEVER on the other. I hope you understand my query. Thanks a lot for responding. Please help.
Here is my code:
DECLARE
form_id FormModule;
pl_id paramlist;
pl_name varchar2(1000);
it_id Item;
BEGIN
pl_name := 'temp';
pl_id := get_parameter_list(pl_name);
IF NOT ID_NULL(pl_id) THEN
destroy_parameter_list(pl_id);
END IF;
pl_id := create_parameter_list(pl_name);
add_parameter(pl_id,'L_OUT_DATE',TEXT_PARAMETER,TO_CHAR(:DAILY_OUTS.OUT_DATE,'DD-MON-RRRR HH24:MI:SS'));
add_parameter(pl_id,'L_DATE_IN',TEXT_PARAMETER,TO_CHAR(:DAILY_OUTS.DATE_IN,'DD-MON-RRRR HH24:MI:SS'));
add_parameter(pl_id,'L_SUBSTATION_CODE',TEXT_PARAMETER,:DAILY_OUTS.SUBSTATION_CODE);
add_parameter(pl_id,'L_BREAKER_CODE',TEXT_PARAMETER,:DAILY_OUTS.BREAKER_CODE);
add_parameter(pl_id,'L_CIRCUIT_CODE',TEXT_PARAMETER,:DAILY_OUTS.CIRCUIT_CODE);
add_parameter(pl_id,'L_REMARKS',TEXT_PARAMETER,:DAILY_OUTS.REMARKS);
add_parameter(pl_id,'L_FREQUENCY',TEXT_PARAMETER,:DAILY_OUTS.FREQUENCY);
add_parameter(pl_id,'L_OUTAGE_CODE',TEXT_PARAMETER,:DAILY_OUTS.OUTAGE_CODE);
add_parameter(pl_id,'L_OUTAGE_SUBCODE',TEXT_PARAMETER,:DAILY_OUTS.OUTAGE_SUBCODE);
add_parameter(pl_id,'L_WEEK_NO',TEXT_PARAMETER,:DAILY_OUTS.WEEK_NO);
add_parameter(pl_id,'L_RADIO_GRP',TEXT_PARAMETER,:DAILY_OUTS.NEW_OUTAGE_GRP);
add_parameter(pl_id,'L_RELAYS_ACT',TEXT_PARAMETER,:DAILY_OUTS.RELAYS_ACT);
add_parameter(pl_id,'L_TRIP_CAUSED_BY',TEXT_PARAMETER,:DAILY_OUTS.TRIP_CAUSED_BY);
add_parameterr(pl_id,'L_SCODE_TRIP_CAUSED_BY',TEXT_PARAMETER,:DAILY_OUTS.SC_CAUSED_BY);
add_parameter(pl_id,'L_ACTION_TAKEN',TEXT_PARAMETER,:DAILY_OUTS.MEASURE);
:GLOBAL.BC := 1;
IF :daily_outs.out_date > sysdate +1 then
MESSAGE('DATE/TIME-OUT IS GREATER THAN SYSTEM DATE. PLEASE CHECK AND ENTER NEW
DATE/TIME-OUT VALUE.', acknowledge);
MESSAGE('DATE/TIME-OUT IS GREATER THAN SYSTEM DATE. PLEASE CHECK AND ENTER NEW
DATE/TIME-OUT VALUE.', acknowledge);
RAISE Form_Trigger_Failure;
END IF;
IF :daily_outs.date_in IS NOT NULL AND :daily_outs.out_date IS NOT NULL THEN
IF (:daily_outs.date_in - :daily_outs.out_date) <= 0 then
MESSAGE('DATE/TIME-IN IS LESS THAN OR EQUAL TO DATE/TIME-OUT. PLEASE ENTER NEW
DATE/TIME-IN VALUE.', acknowledge);
RAISE Form_Trigger_Failure;
END IF;
END IF;
OPEN_FORM('FRMSPM_DAILY_BRKRS_PARAM', ACTIVATE, NO_SESSION, SHARE_LIBRARY_DATA, pl_id);
END; -
Help. when I link html pages, they show up much larger in browser
Hello,
I designed 5 pages. When I look at them all through the browser individually in Dreamweaver CS4, they show up all correctly with a fixed width of 950.
The problem comes when I link my navigation buttons to the html pages. When I click onto the links to the pages in the browser, three out of five of the pages become large. Instead of a 950 pixel width, all the content becomes bigger to fit my browser on my 15 inch screen.
Can someone please help? I've been looking at this all day and need to get this done for a friend soon.
I have saved all my files as document relative in Dreamweaver cs4. I have also defined the target of each link as "self".
Thanks so much in advance.Would be super grateful for any help!
QuiannaPerhaps you could jsut paste the html for one of yoru problematic pages here so we can see it, altho tht may not be enough to really tell.
The method you appear to have used to create the page is not the most desirable, but should have worked okay I would think. And such a table ought not typically be fluid unless you went out of yoru way to make it so, so not sure what is happening. Have to see the page.
Another option is to upload your page, and its associated assets (images, cs js files etc) to http://www.getdropbox.com/ i jsut learned about
this site recently on this forum and it seems a great idea for allowing us to see yoru page and help you. Far bettr than pasting yoru code here!
E. Michael Brandt
www.divahtml.com
www.divahtml.com/products/scripts_dreamweaver_extensions.php
Standards-compliant scripts and Dreamweaver Extensions
www.valleywebdesigns.com/vwd_Vdw.asp
JustSo PictureWindow
JustSo PhotoAlbum, et alia -
i wrote html code for entering username and password.
then i got output in html page as
SAP LOGON SCREEN
USER NAME
PASSWORD
ENTER
when the user press enter button both username and password has to check with data in ztable in sap.
validation has to done.
if input not match with sap ztable it should produce error message when user press enter buuton in html
please give me some steps to do rfcHi,
It is not possible to intract backend system from html alone, even we are not able to write java scripts too. So try to SAPNW to develope your application.
If you decide to create application via SAPNW then you can go with following steps,
1. Create application (Application, component, window and view)
2. Import model (it needs JCo details)
3. In controller create an object for function module which one you imported, bind it to model node, assign user name and password and use "exec" function to execute and get return values from backend system through another model node and display result as you wish.
4. Build, Deploy and Run your application
Good Luck!
Maybe you are looking for
-
Getting SOAPFaultException while Calling the web service
Hi All, I am using jdev 11g 1.5. I am calling OID process , for which i have created web service proxy. On command button, i hv calling Action Listener and inside that method,i am fetching some data with three view object and setting that value to OD
-
How to make new jars available globally on the portal to all projects?
Hello, I have downloaded few jar files which are needed for few projects and aren't comming with the portal by default. I would like to make these jars available globally to every project I will write in the future. What is the exact procedure I need
-
Programatically add / Rmove Attributes to a View Object
I have a View Object with 2 attributes created at design time. I need to add more attributes to it at runtime based on some information I get. Is there a way to add/remove Attributes of the View Object programatically at runtime ? Any help is appreci
-
Apple Mail new messages opening behind active window
I have been noticing that new mail messages often open behind active windows, especially Microsoft office (Word). When I create a new message, the new message will often open and sit behind the current open document. I have noticed this mostly when
-
Coherence Issues (COH-????)
In release notes and sometimes in the forum messages, I see references to Coherence Issues. Example: WebLogic Portal Integration Certified the PortalCacheProvider with WebLogic Portal 9.2 and 10.2+ (COH-1523) Other Enhancements and Fixes: Improved mu