Anonymizer Bean is not working XML file -- ABAP Proxy scenario.

Hi Experts,
Can anybody please help, How can add this line <ns0:ROOT xmlns:ns0="urn:XXX:snc:productactivedata"> to my input xml file?
</ns0:ROOT> to the end of the input xml file. One more thing please, how to remove "standalone="yes" " from this line <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
I have tried with Anonymizer bean settings, I can't able to achieve this, with XSLT mapping could, but I don't know XSLT mapping, can any one help me in this?
Many Thanks
Regards
San

Hi Prateek,
If do, like remove namespace in the message type then i get this error.
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="MAPPING">GENERIC</SAP:Code>
<SAP:P1>com/sap/xi/tf/_MM_EDI_ProAct_One_N_</SAP:P1>
<SAP:P2>com.sap.aii.utilxi.misc.api.BaseRuntimeException:</SAP:P2>
<SAP:P3>The element type "D01_PO4" must be terminated by t</SAP:P3>
<SAP:P4>he matching end-tag "</D01_PO4>".</SAP:P4>
<SAP:AdditionalText />
<SAP:Stack>com/sap/xi/tf/_MM_EDI_ProAct_One_N_com.sap.aii.utilxi.misc.api.BaseRuntimeException:The element type "D01_PO4" must be terminated by the matching end-tag "</D01_PO4>".</SAP:Stack>
I have checked the message, xml message format fine. Any help in this please?
Thanks & Regards
San

Similar Messages

EOIO is not working for file- BPM- Proxy scenario.

Hi All,
I have one File to BPM (Merge pattern ) to Proxy scenario.
I have two file communication channel at the sender side and defined QOS as EOIO for both. In SXMB_MONI it assings same queue for all messages.
BPM is merging that messages. However during that it assings different queue for merged messages.
When it comes to proxy , again different queues are assingned to the messages.
Is there any way I can define QOS in BPM or at the proxy side ( I know it should be at the sender side only , but it's not working..)
Thanks & Regards,
Dijesh Tanna.

HI,
Within the current release the BPM will always only use EO (SAP Note 833740).
May be the SAP note 905049 will help you on this ...
Thanks
Swarup

XML file to Proxy Scenario with BPM - ID Steps

Hi Guys,
Any one can help me to find about the scenario XML file to ABAP Proxy with BPM, ID steps please. Any link or logical routing, receiver determination and interface determination idea. Please correct me,
I have created Business Service as sender to send one xml file to BPM, BPM is sending a message to SNC system. I have created 2 receiver determinations, but I am confusing in interface determination, where to declare OM?
Please can any one respond bit quicker.
Thanks in advance
Regards
San

ES Repository
                     *Service Interfaces*
Create one outbound service interface for XML file.
Create one Inbound synchronous Interface for SNC system.
Create one Abstract Asynchronous interface ,same message type as you used for outbound service interface .This is for Integration process receive step.
Create one Abstract async interface for receiving the response from SNC system in Integration process.
Create one Abstract synchronous interface to be used in the Integration process for Send sync step.
Create on inbound asyn service interface for sending the response from integration process (received from SNC system) to the Receiver System.
              Operation Mapping.
Create an Operation Mapping using Abstract sync interface and inbound syn interfaces.
              Integration Process
start--->receive Step---->send Synchronous step----->send step.
Create two container elements
first with abstrat async interface for the XML request.
second for abstract asyn interface with the XML response structure (asyn receiver system structure)
In the send sync step select your abstract syn interface from the F4 help.and select the corresponding request and response message from the container element you defined earlier.
Integration Directory.
Create one sender File adapter Communication channel for XML file reading.
Create two receiver communication channel for sync system(receiver XI adapte for ABAP PROXY) and other for asyn receiver system .
Create 3 receiver determination
1.from sender to Integration process.
2.from Integration process to SNC system.
3. from Integration process to Asyn Receiver System.
Create 3 Interface determination.
Specify Operation mapping while you are creating interface determination from Integration Process to Syn BS.
Create one sender agreement
Create two Receiver agreement.
Regards
Kubra Fatima.

File to Proxy Scenario Error

Hi Experts,
I am working on File To Proxy Scenario. I am getting the below Error: The Messages in SXMB_MONI are going to AUtomatically Restart Status. I see some Queues with RETRY Status in SMQ2. When i am testing from SPROXY, the Table is Updated with the Corresponding Values. But when i place the file in the ftp folder then i am getting this error.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">CLIENT_SEND_FAILED</SAP:Code>
<SAP:P1>500</SAP:P1>
<SAP:P2>Internal Server Error</SAP:P2>
<SAP:P3>(See attachment HTMLError for details)</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>Error while sending by HTTP (error code: 500, error text: Internal Server Error) (See attachment HTMLError for details)</SAP:Stack>
<SAP:Retry>A</SAP:Retry>
</SAP:Error>
Please check and do the needful .
Regards,
GIRIDHAR

Hi Giridhar,
The problem is with connection. Please check the below discussion
HTTP returns status is 500(Internal Server Error)
Problem in ABAP proxy........ | SCN
regards,
Harish

File to Proxy scenario message failed in ECC with staus SYSFAIL

Hi All,
We are working on File to proxy scenario, PI able to send message successfully to ECC, but In ECC , message got stuck in queues with the status 'SYSFAIL',
when I read the error message it is showing Address Invalid.
when I run the LUW, it is giving 'Function module does not exist or EXCEPTION 'raised message.
I'm using PI 7.1 EHP1 , ECC 6.0, can anyone suggest the trouble shooting guidelines for this issue?
Thanks,
Venu.

when I run the LUW, it is giving 'Function module does not exist or EXCEPTION 'raised message.
in your code, there seems to be an invalid statement.
check the proxy code.

How can I parse an XML string, (not an XML file)?

Hi,
I am using Xerces2 Java Parser 2.4.0,
I wanta parse an XML string, not an XML file, but
in the Parser class there is only following methods:
parse(InputSource source)
parse(java.lang.String systemId)
thanks

hi
InputSource is = new InputSource(new ByteArrayInputStream(xmlSrc.getBytes()));
HTH
vasanth-ct

I bought creative suite cs6 design standard student and teacher edition and the download did not work properly - files appear incomplete/ or damaged - none of the program items work at all. File size for installation seems very small for a product of this

I bought creative suite cs6 standard student and teacher edition and the download did not work properly - files appear incomplete/ or damaged. File size seems very small for a product of this size. Can you assist with download issue or provision of software ?

Lalalaladog where did you download CS6 from? I would recommend downloading the installation files for Creative Suite 6 Design Standard at Download CS6 products

INTERNAL - AMF_ERROR in XML -- ABAP proxy scenario

Hi Experts,
Can any one help me to solve this following issue please, it is happening while I am executing the scenario between XML File to ABAP Proxy scenario.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">AMF_ERROR</SAP:Code>
<SAP:P1>1</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>Error when processing message number 1 in package No object type found for the message. Check that the corresponding process is activated An exception has occurred.</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>.
This XML message has got 5 Lines Header and more than 100 Lin Items, this kind of Header and Lin item message 3 to 4 in one XML, I am using multi mapping. Message mapping shows working fine, OM also shows working fine. BPM is splitting messages to send messages to ABAP Proxy on SNC 7.0. After I have done all with SDN experts support, still I am having the above issue. can any one experties might help to resolve this?
I will appreciate your support.
Thanks & Regards
San

Can you please explain the solution.
Regards,
Rashi

Data is not getting posted in ABAP Proxy.

Hi,
I am working on File to ABAPProxy scenario. The data is not going to proxy.
In PI sxmb_moni is status is successfull and in the R3 sxmb_moni the status is successfull. But the data is not getting posted in the tables(ABAPProxy). I had checked the inbound and oubound queues. And with the same input data, abapers cheked their code in Abapproxy, then the table is getting updated. When we trigger from PI, the tables are not getting updated.Please help me.
Thanks,
Pragathi.

Hi,
The problem may be
Case 1: Cache is not getting refreshed(Check SXI_CACHE)
Case 2: The Queue Is blocked (Check SMQ1 & SMQ2)
Regards,
Sainath

File to ABAP Proxy Scenario

Hi All,
I am doing File-to-ABAP Proxy Scenario, in the sender side side it is picking the file, but in sxmb_moni it is giving the error:
*<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>*
*- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIProtocol</SAP:Category>
<SAP:Code area="MESSAGE">DUPLICATE_DETECTED</SAP:Code>
<SAP:P1>4CFF4691EEE211DC85E30019D1522982</SAP:P1>
<SAP:P2>CENTRAL</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Message ID 4CFF4691EEE211DC85E30019D1522982 already exists in called system (pipeline CENTRAL)</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
Can u plz tell me why this error is occurring and how we can resolve this error.
Thanks & Regards,
Vikas

Hi Vikas
make a dummy change and activate your object then make a full refresh
you can make it through in 3 ways
1) tcode SXI_CACHE
2) go to ID -> environment and make a full cache refresh
3) http://<host>:5<sys#>00/CPACache/refresh?mode=full Full CPA cache refresh
when you do the developement then these are stored in ABAP data dictionary table which can be refreshed by delta cache
while full cache will delete this temporary object and make this cahe into runtime
hope this will help you
thanks
sandeep
if helpful reward points

ABAP proxy scenario file - PI7.1- ECC NO_MAPPINGPROGRAM_FOUND

Hello Experts,
I have ABAP proxy scenario file -> PI7.1->ECC . I am getting an error for communication between PI and ECC system. the error is NO_MAPPINGPROGRAM_FOUND and pointing to operation mapping in the software component.
What i found in TCODE SXMB_MONI is 2 adaptor call one from one below the other out of which one is in error.
Also when a file is passed from the file server to the SAP PI I see 2 entries in SXMB_MONI for the same Payload one from source system to target system and one from target system to source system ( ie. from business component as sender and ECC as receiver system and one entry for ECC system as receiver and business system for file as receiver ) is this how it should be
one more thing i would like to specify is that my service interface is Point to point enabled . Is it happening because of that
Request you help on urgent basics
BR Heth

Hi,
1. in PI, by hazard, your Service Interface (SI) does not the mode "synchronous"?
2. or does this SI was declared firstly with "synchronous" mode and the proxy generated with this mode, and then you decided to put "Asynchronous"... without to regenerate the proxy in ECC?
If it's the case, in ECC, select your SI, do a right-click and regenarete the proxy.
3. for the 2nd message (returned by ECC to PI), have you seen the Payload content and SOAP Header?
Could you please also check the Pipeline (e.g CENTRAL, CENTRAL_BACK) ?
4. In SXMB_MONI of ECC, how many messages have you: one ? or two ?
Regards
Mickael

FTP to ABAP Proxy Scenario - getting error CO_TXT_CHANNEL_PASSWORD_ERROR

We have transported PI and EP data from development server to respective production, every thing is running fine except the abap proxy scenarios i.e. PI reads file from ftp location and calls the abap proxy but we are getting following errors:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>

<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="OUTBINDING">CO_TXT_CHANNEL_PASSWORD_ERROR</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Unable to read user password from communication channel of type Error when accessing the secure store (access ID = FD768D4A8772DB50E1000000AC10041E) Error while reading from the secure store: ERROR_UNKNOWN: Cannot find entry in secure store (SECSTORE,023)</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Any solution?
Please note that I have searched and applied solutions given on SDN forums but didn't get any success. So I am looking for new suggestions.
Regards,
Jawed Ali

Jawed ,
Please test the HTTP destination of your receiver comm channel.
Which is the RFC connection to your R3 system.
Transaction SM59 and check the logon parameter for the connection you are using.
Regards,

File to Proxy Scenario Query

Hi All,
I hav a file to proxy scenario. The XML file is sent as a proxy from XI to ECC. but ECC is receving it as a blank file.
SXMB_MONI in XI is success but in ECC it has failed. Please help us understand where the problem is occuring.
Regards,
Sudeep R

Hi,
Please check your sxmb_moni in ECC & XI, in both message, check the message data is same.
If you are receiving data on PI from file successfully, the problem can be in Mapping in PI, check that in PI. In this case data will not be sent to ECC System.
If you are receiving data on ECC from PI, now check the problem in Proxy code.
Check the steps for inbound proxy in the below blog :
/people/sandeep.kaushik/blog/2010/07/15/abap-proxy-complete-developments-on-sap-pi-sap-abap-systems

Error in FILE 2 Proxy Scenario

Hi All,
I am doing File to Proxy Scenario i am getting following error
Could any one provide the solution for this.
*<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>*
*- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIProxy</SAP:Category>
<SAP:Code area="ABAP">INTERFACE_REGISTRATION_ERROR</SAP:Code>
<SAP:P1>ifmmessif</SAP:P1>
<SAP:P2>MI_Emp_Sender</SAP:P2>
<SAP:P3>Namespace</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>No implementing class registered for the interface (ABAP interface, request message MI_Emp_Sender, request message, namespace )</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
Thanks in Advance
Mahesh
</SAP:Error>
Edited by: Mahesh Reddy on Jul 10, 2008 12:47 PM

Hi Mahesh,
1) Use SPROXY transaction.
Menu-> Proxy -> Activate All.
2) check in the interface determination if u are using correct
inbound interface.
3) If this if fine....try deleting all proxy objects of the interface
and create new.
Regards,
Praveen K

File to Proxy Scenario : Error in communication channel monitoring

Hi,
I have developed File to Proxy Scenario on PI 7.1 system and it is not working. I see the below error in communication channel monitoring.
u201CError: com.sap.engine.interfaces.messaging.api.exception.ConfigException: Some of the IS access information is not available. SLDAccess property may be set to true, but SLD is not available.u201D
File will be picked from the FTP server.
I have created File system in SLD of type "Third Party", Can this be the issue?
Please guide me on this.
Thanks,
Chandravadan

Hi!
Check if the tcode SLDCHECK is ok!
Check note #764176.
Also, refer to link below and execute each steps from the links there MANUALLY.
Wizard-Based Configuration:
http://help.sap.com/saphelp_nwpi71/helpdata/EN/45/2e4c1b16bb4aa8e10000000a11466f/frameset.htm
Regards,
Caio Cagnani

Anonymizer Bean is not working XML file -- ABAP Proxy scenario.

Similar Messages

Maybe you are looking for