Another wrong "Too many streams" message

I had this issue a while ago and it's back.
Currently recording ESPN News and ESPN. Watching NBC on one TV. Try to change the DVR TV from Fox Sports 1 to another channel and the message pops up.

That Don Guy wrote:
Pardon me for sounding like the "tech support rep reading from a manual," but do you have more than two STBs (including the DVR box), and if you do, are you sure you don't have one of them turned on that you think is turned off?
What does the app say about how many streams you have when this happens?
I have three boxes. DVR and two wireless. I'm quite sure the other wireless was off.
Let me play Devil's Advocate here:
Currently recording ESPN News and ESPN. Watching NBC on one TV. Try to change the DVR TV from Fox Sports 1 to another channel and the message pops up.
That by itself is four streams. Assuming the other STB was turned on, then I would have had issues when I turned the DVR *on* to watch live TV on FS1, correct?

Similar Messages

  • How do I reset the number of activations on Visio 2003 after getting a "too many activations" message?

    I just installed Visio 2003 on a PC, and got the "we can't activate this app via the internet because you've installed it too many times" message. I went back to phone activation, but, of course, that's no longer available for this product.
    How do I get the number of activations reset? Apparently you used to be able to do this by calling Microsoft, but what's the number to call? Or is there another way to do it?
    I'm probably going to need to do it for my copy of Office 2003 also.

    Hi,
    Microsoft has ended support for Office 2003 on April 8, 2014. This change will affect your software updates and security options.
    Please contact your local customer service. Explain to the service (Human being) that you can’t activate Visio 2003 and the error message is “we can't
    activate this app via the internet because you've installed it too many times”.
    You can find
    your local custom support number on the link below.http://support.microsoft.com/gp/customer-service-phone-numbers/en-us
    Hope it can be helpful.

  • I can no longer type messages.  I have tried deleting to see if I have too many saves messages.  That did not help.  I also cut off the phone and turned back on.  That did not help.  Ideas?

    I can no longer type messages.  I have tried deleting to see if I have too many saves messages.  That did not help.  I also cut off the phone and turned back on.  That did not help.  Ideas?

    http://www.bubblews.com/news/874646-apple-is-having-issues

  • HT5312 I forgot my security question answers and answered wrong too many times so now it won't let me download anything even though I know my password, what do I do?

    I forgot my security question answers and answered wrong too many times so now it won't let me download anything even though I know my password, what do I do?

    You need to contact Apple to get the questions reset. Click here, phone them, and ask for the Account Security team, or fill out and submit this form.
    (95618)

  • Too many failed message tracking resquests via task in Exchange 2010 SP3

    Hi,
    We are getting this alert every day and I don't find anything to solve it...
    Some days it's Yellow (3%) and the others it's Red (5%)... But we don't have 5% of the messages failed.
    Do there is a solution to this problem or even somewhere to look ?

    To Fix your issue, try to override monitor rule of KHI: Too many failed message tracking requests via task – Red (>5%) and also rule of KHI: Too many failed message tracking requests via task – Yellow (>3%)
    Also you can refer below link
    http://social.technet.microsoft.com/Forums/en-US/089b0c7c-77c5-47ef-9e48-7e44a8f1d2a1/khi-too-many-failed-message-tracking-requests-via-task-in-exchange-2010-sp1-management-pack?forum=operationsmanagermgmtpacks
    Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"

  • HT1212 ipad is locked as my daughter locked putting in the password wrong too many times. When I try and do a restore it seems to be doing it until the end and it say it can't do anything as it's locked, go to itunes to unlock.. It's driving me mental

    My ipad 4 wif is ocked as my daughter locked putting in the password wrong too many times. When I try and do a restore it seems to be doing it until the end and then it say it can't do anything as it's locked, go to itunes to unlock.. It's driving me mental. tried twice now ...
    I haven't synced with a password, I don't mind losing all the data I just want to be able to use it again !! I'm not sure what IOS it is, not sure it's the most recent, I have a feeling I'm not on IO7.
    Thanks for all your help.

    Force iPad into Recovery Mode. Follow step 1 to 6 very closely.
    http://support.apple.com/kb/HT1808
    Note: You may have to repeat the above a few times.

  • IChat Leopard "attempted to login too many times" message

    I'm getting the "attempted to login too many times" message when I try to use AIM on ichat. I tried switching to 443, but no luck. Any other suggestions? Thanks.

    http://discussions.apple.com/thread.jspa?messageID=6393221#6393221
    You can wait until iChatAgent disappears for the Activity Monitor before deleting the .plists
    I am not sure why it will not let you Force Quit or rather confirm a Force Quit.
    9:31 PM Sunday; January 20, 2008

  • What do i do if my account was locked for answering the security questions wrong too many times?

    what do i do if my account was locked for answering the security questions wrong too many times?

    Apple ID security issues -
    Call Apple Care and ask for the Account Security Team. They can assist you with your issue.

  • 'Sorry, Too Many Cards' message NOT rendering correctly

    I'm seeing the 'Sorry, Too Many Cards' message not render properly for me on Palm Pre 1.3.1. I rebooted the phone and was able to reproduce the problem by opening up many cards. I have uploded a screenshot: http://img188.imageshack.us/img188/6525/browser20091511171212.png
    As you can see, the 'OK' button is not rendered correctly. If I remember correctly it supposed to be a green button? Also, the right side box is supposed to have an icon or something. I've never seen this error message NOT rendered properly before 1.3.1.
    BTW, like others have posted - once I get to a memory threshold I can't even open up core apps - like 'Device Info' (in case I needed to reboot the phone). I would have expected some high availability on these apps w/r/t memory management.
    I would upload more debugging information if I knew how on the Pre. But like I said I was able to reproduce on 1.3.1 before and after a reboot.
    Thanks,
    Post relates to: Pre p100eww (Sprint)

    lblumen wrote:
    Am getting same message.  Since new update was downloaded.  Also, I am getting the too many cards open message daily, even when no other cards are open
    I'm having the same problem. Usually I will have Tweed open along with the Camera app. I try to send a photo by email and I get the "too many cards open message". Sometimes when I turn the screen off and turn it back on it fixes it. But today I only had the Photo app open and was trying to send a photo by email and i got the "too many cards open message". The same happens when I only have one program like the emailapp then click on a link. Right now I have NO apps open. I'm trying to open the camera app and it keeps giving me the warning. It's very annoying, especailly when you are trying to do some quick. Oh don't get me started on the the slowness of the system ...

  • How do I reset my Ipod if the passcode that was put on it was entered wrong too many times and it disables the ipod?

    My son put a passcode on his IPOD TOUCH and couldnt remember it and entered it too many times. Now it has disabled the Ipod and says please connect to ITunes and ITunes will not connect to it because it has been disabled, I have already spoke to an Apple representative and did exactly what they told me to do to help reset the Ipod but that didnt work. So I am trying to figure out how we can get back into his IPod even if we have to factory reset it because nothing is working, not their instructions or the internet instructions for reseting it.

    Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device
    1. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
    2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    3. iOS- Understanding passcodes
    4. What to Do If You've Forgotten Your iPhone's Passcode
    5. How to Recover Forgotten iPhone Restrictions Passcode | The iPhone and iPad
    6. Restoring iPod touch after forgotten passcode
    7. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    Restrictions Passcode Help
    1. How to Recover Forgotten iPhone, iPad Restrictions Passcode

  • What can I do when Safari does not open a website?  I get a "too many redirects" message.

    Safari can not open a website on my iPad. (www.rci.com)  Message received is:  "Cannot open.  Too many redirects."  What should I do? 

    Use the malware removal tool here >  The Safe Mac » Adware Removal Guide

  • CJV4: Termination: Too many errors (Message no. CJ280)

    Hi experts
    While attempting transfer of Modified simulation version to Operative in transaction code CJV4, the following error experienced:
    Error u201CTermination: Too many errors (more than 10% of methods)
    Message no. CJ280u201D
    Request please suggest solution.
    Also suggest any other way to transfer simulation version to operative project (To update the operative project with selected simulation version).
    warm regards
    ramSiva

    Hi experts
    While attempting transfer of Modified simulation version to Operative in transaction code CJV4, the following error experienced:
    Error u201CTermination: Too many errors (more than 10% of methods)
    Message no. CJ280u201D
    Request please suggest solution.
    Also suggest any other way to transfer simulation version to operative project (To update the operative project with selected simulation version).
    warm regards
    ramSiva

  • Sorry, Too Many Cards message on Pre

    I've gotten this message 5x today and 2x yesterday, with NO CARDS OPEN! I can't do anything on the d--n phone ~ is this more 1.4 bugs??

    lblumen wrote:
    Am getting same message.  Since new update was downloaded.  Also, I am getting the too many cards open message daily, even when no other cards are open
    I'm having the same problem. Usually I will have Tweed open along with the Camera app. I try to send a photo by email and I get the "too many cards open message". Sometimes when I turn the screen off and turn it back on it fixes it. But today I only had the Photo app open and was trying to send a photo by email and i got the "too many cards open message". The same happens when I only have one program like the emailapp then click on a link. Right now I have NO apps open. I'm trying to open the camera app and it keeps giving me the warning. It's very annoying, especailly when you are trying to do some quick. Oh don't get me started on the the slowness of the system ...

  • "Too Many Cards" message

    I didn't really know for sure which section of this forum to post this problem, so hopefully this is close.
    I keep getting the error message "Sorry, Too Many Cards. Please toss away any you're not using... etc." even though there are no cards open, and it has been a problem for several days.
    It's a big problem because it won't let me download updates, view the internet, or even make calls sometimes.
    Sometimes it fixes itself when I turn the phone on and off, but sometimes it goes on for up to an hour and it's very annoying.
    I'd appreciate any feedback that might help me with this bizarre problem!
    Thanks!
    Adie
    Post relates to: Pixi Plus p121vzw (Verizon)

    Hopefully this isn't a silly question, but by "turn my phone on and off" do you mean just hit the power button put the phone to sleep and then hit it again to wake it up? If so, then you need to reboot the phone. That will solve the problem, at least until you've opened enough of the right apps for the problem to occur again. 
    Go to this page for general troubleshooting tips, including how to reboot your phone: 6Ts of Troubleshooting webOS

  • I have too many unread messages for my computer to...

    Help would be very much appreciated,  I haven't been able to find a customer support to call so I'm asking here.
    Pretty much I have a really old computer and I recently had to work out of state without internet for a few months.
    When I got back  one of my groups (one I want to frequent) had so many unread messages that whenever I clicked on the group it would crash skype.  (not responding, then I'd be forced to ctrl-shift-esc out of skype.)
    So I decided to simply right click the group and "mark all as unread"...  
    ...Which crashed skype and didn't remove any of them.
    Fine, I decided to try everything, contacting the admin to kick me and re-invite (and the unread messages are still there),  leaving (which crashes skype), removing the group from contacts (crash), and finally uninstalling/reinstalling skype to no avail.
    So,  since all I have is my computer which cant handle this  (I'm snowed in atm)  what (if anything) can I do to force the "unread" messages to be gone?  
    It says there are 144249 of them (and a few days ago when I was still trying to fix it it was upwards of 400k). 
    Solved!
    Go to Solution.

    http://community.skype.com/t5/Windows-desktop-client/Read-messages-marked-as-unread/m-p/1678266
    Found one close enough and the fix worked.  Hopefully the group doesn't send me 500k messages welcoming me back before I get on tomorrow.

Maybe you are looking for

  • How to view my back up files?

    Hello, I just upgraded to 2.1 software, and had to restore my phone from scratch (because back up was "corrupted") but now i don't have any of my camera roll pictures, i'm missing some application data, and several contacts! how can i get this back w

  • How I can pass from an iView SAP BW 3x the personnel number to a report BI

    Good Afternoon. I need pass as parameter the personnel number of the user that entry in the portal to a report BI. I did the following steps for created the iview in the portal: [Steps for create the iview|http://www.freeimagehosting.net/uploads/cc53

  • Presentation Director missing the "NEW" button

    Hi Does anybody know why the"NEW" button is gone in newer versions of Presentation Director?  We have been using this for years but now we have to import new profiles or change old profiles. Fn + F7, "choose more setting", there we have Copy,Edit, De

  • QT 7.0.3. Pro and Tiger

    Hi All, Crossposting for a quick fix. Since upgrading to Tiger I can't play movies on Quicktime - I get a blank movie screen. But I can play a .mov from a CD. Is there a setting I need to ajust? Thanks in advance. Phil

  • Can I isolate part of a shape path to simplify if?

    Hello, I want to simplify part of a complex shape.  Is it possible to isolate part of a shape path and simplify it, leaving the rest of the shape with the original number of anchor points? Thank you